diff options
| author | Masahiro Yamada <masahiroy@kernel.org> | 2020-06-13 19:50:22 +0300 |
|---|---|---|
| committer | Masahiro Yamada <masahiroy@kernel.org> | 2020-06-13 19:57:21 +0300 |
| commit | a7f7f6248d9740d710fd6bd190293fe5e16410ac (patch) | |
| tree | dc59d36a552f7e25f909f5b2edc83f96c013befa /drivers/net | |
| parent | e4a42c82e943b97ce124539fcd7a47445b43fa0d (diff) | |
| download | linux-a7f7f6248d9740d710fd6bd190293fe5e16410ac.tar.xz | |
treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Diffstat (limited to 'drivers/net')
166 files changed, 811 insertions, 811 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index c7d310ef1c83..9a49c4c2316b 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -7,7 +7,7 @@ menuconfig NETDEVICES default y if UML depends on NET bool "Network device support" - ---help--- + help You can say N here if you don't intend to connect your Linux box to any other computer at all. @@ -32,7 +32,7 @@ config MII config NET_CORE default y bool "Network core driver support" - ---help--- + help You can say N here if you do not intend to use any of the networking core drivers (i.e. VLAN, bridging, bonding, etc.) @@ -42,7 +42,7 @@ config BONDING tristate "Bonding driver support" depends on INET depends on IPV6 || IPV6=n - ---help--- + help Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet Channels together. This is called 'Etherchannel' by Cisco, 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux. @@ -58,7 +58,7 @@ config BONDING config DUMMY tristate "Dummy net driver support" - ---help--- + help This is essentially a bit-bucket device (i.e. traffic you send to this device is consigned into oblivion) with a configurable IP address. It is most commonly used in order to make your currently @@ -116,7 +116,7 @@ config WIREGUARD_DEBUG config EQUALIZER tristate "EQL (serial line load balancing) support" - ---help--- + help If you have two serial connections to some other computer (this usually requires two modems and two telephone lines) and you use SLIP (the protocol for sending Internet traffic over telephone @@ -150,7 +150,7 @@ config IFB tristate "Intermediate Functional Block support" depends on NET_CLS_ACT select NET_REDIRECT - ---help--- + help This is an intermediate driver that allows sharing of resources. To compile this driver as a module, choose M here: the module @@ -164,7 +164,7 @@ source "drivers/net/team/Kconfig" config MACVLAN tristate "MAC-VLAN support" - ---help--- + help This allows one to create virtual interfaces that map packets to or from specific MAC addresses to a particular interface. @@ -200,7 +200,7 @@ config IPVLAN tristate "IP-VLAN support" depends on INET depends on IPV6 || !IPV6 - ---help--- + help This allows one to create virtual devices off of a main interface and packets will be delivered based on the dest L3 (IPv6/IPv4 addr) on packets. All interfaces (including the main interface) share L2 @@ -219,7 +219,7 @@ config IPVTAP depends on IPVLAN depends on INET select TAP - ---help--- + help This adds a specialized tap character device driver that is based on the IP-VLAN network interface, called ipvtap. An ipvtap device can be added in the same way as a ipvlan device, using 'type @@ -233,7 +233,7 @@ config VXLAN depends on INET select NET_UDP_TUNNEL select GRO_CELLS - ---help--- + help This allows one to create vxlan virtual interfaces that provide Layer 2 Networks over Layer 3 Networks. VXLAN is often used to tunnel virtual network infrastructure in virtualized environments. @@ -249,7 +249,7 @@ config GENEVE depends on IPV6 || !IPV6 select NET_UDP_TUNNEL select GRO_CELLS - ---help--- + help This allows one to create geneve virtual interfaces that provide Layer 2 Networks over Layer 3 Networks. GENEVE is often used to tunnel virtual network infrastructure in virtualized environments. @@ -276,7 +276,7 @@ config GTP tristate "GPRS Tunneling Protocol datapath (GTP-U)" depends on INET select NET_UDP_TUNNEL - ---help--- + help This allows one to create gtp virtual interfaces that provide the GPRS Tunneling Protocol datapath (GTP-U). This tunneling protocol is used to prevent subscribers from accessing mobile carrier core @@ -295,12 +295,12 @@ config MACSEC select CRYPTO_AES select CRYPTO_GCM select GRO_CELLS - ---help--- + help MACsec is an encryption standard for Ethernet. config NETCONSOLE tristate "Network console logging support" - ---help--- + help If you want to log kernel messages over the network, enable this. See <file:Documentation/networking/netconsole.rst> for details. @@ -343,7 +343,7 @@ config TUN tristate "Universal TUN/TAP device driver support" depends on INET select CRC32 - ---help--- + help TUN/TAP provides packet reception and transmission for user space programs. It can be viewed as a simple Point-to-Point or Ethernet device, which instead of receiving packets from a physical media, @@ -365,14 +365,14 @@ config TUN config TAP tristate - ---help--- + help This option is selected by any driver implementing tap user space interface for a virtual interface to re-use core tap functionality. config TUN_VNET_CROSS_LE bool "Support for cross-endian vnet headers on little-endian kernels" default n - ---help--- + help This option allows TUN/TAP and MACVTAP device drivers in a little-endian kernel to parse vnet headers that come from a big-endian legacy virtio device. @@ -385,7 +385,7 @@ config TUN_VNET_CROSS_LE config VETH tristate "Virtual ethernet pair device" - ---help--- + help This device is a local ethernet tunnel. Devices are created in pairs. When one end receives the packet it appears on its pair and vice versa. @@ -394,13 +394,13 @@ config VIRTIO_NET tristate "Virtio network driver" depends on VIRTIO select NET_FAILOVER - ---help--- + help This is the virtual network driver for virtio. It can be used with QEMU based VMMs (like KVM or Xen). Say Y or M. config NLMON tristate "Virtual netlink monitoring device" - ---help--- + help This option enables a monitoring net device for netlink skbs. The purpose of this is to analyze netlink messages with packet sockets. Thus applications like tcpdump will be able to see local netlink @@ -414,14 +414,14 @@ config NET_VRF depends on NET_L3_MASTER_DEV depends on IPV6 || IPV6=n depends on IPV6_MULTIPLE_TABLES || IPV6=n - ---help--- + help This option enables the support for mapping interfaces into VRF's. The support enables VRF devices. config VSOCKMON tristate "Virtual vsock monitoring device" depends on VHOST_VSOCK - ---help--- + help This option enables a monitoring net device for vsock sockets. It is mostly intended for developers or support to debug vsock issues. If unsure, say N. @@ -450,7 +450,7 @@ source "drivers/net/ipa/Kconfig" config NET_SB1000 tristate "General Instruments Surfboard 1000" depends on PNP - ---help--- + help This is a driver for the General Instrument (also known as NextLevel) SURFboard 1000 internal cable modem. This is an ISA card which is used by a number of cable diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig index 10589a82263b..09f94d4b14e2 100644 --- a/drivers/net/appletalk/Kconfig +++ b/drivers/net/appletalk/Kconfig @@ -5,7 +5,7 @@ config ATALK tristate "Appletalk protocol support" select LLC - ---help--- + help AppleTalk is the protocol that Apple computers can use to communicate on a network. If your Linux box is connected to such a network and you wish to connect to it, say Y. You will need to use the netatalk package @@ -79,7 +79,7 @@ config COPS_TANGENT config IPDDP tristate "Appletalk-IP driver support" depends on DEV_APPLETALK && ATALK - ---help--- + help This allows IP networking for users who only have AppleTalk networking available. This feature is experimental. With this driver, you can encapsulate IP inside AppleTalk (e.g. if your Linux diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig index 43eef60653b2..a51b9dab6d3a 100644 --- a/drivers/net/arcnet/Kconfig +++ b/drivers/net/arcnet/Kconfig @@ -6,7 +6,7 @@ menuconfig ARCNET depends on NETDEVICES && (ISA || PCI || PCMCIA) tristate "ARCnet support" - ---help--- + help If you have a network card of this type, say Y and check out the (arguably) beautiful poetry in <file:Documentation/networking/arcnet.rst>. @@ -33,7 +33,7 @@ config ARCNET_1201 config ARCNET_1051 tristate "Enable old ARCNet packet format (RFC 1051)" - ---help--- + help This allows you to use RFC1051 with your ARCnet card via the virtual arc0s device. You only need arc0s if you want to talk to ARCnet software complying with the "old" standard, specifically, the DOS @@ -82,7 +82,7 @@ config ARCNET_COM90xx config ARCNET_COM90xxIO tristate "ARCnet COM90xx (IO mapped) chipset driver" - ---help--- + help This is the chipset driver for the COM90xx cards, using them in IO-mapped mode instead of memory-mapped mode. This is slower than the normal driver. Only use it if your card doesn't support shared @@ -93,7 +93,7 @@ config ARCNET_COM90xxIO config ARCNET_RIM_I tristate "ARCnet COM90xx (RIM I) chipset driver" - ---help--- + help This is yet another chipset driver for the COM90xx cards, but this time only using memory-mapped mode, and no IO ports at all. This driver is completely untested, so if you have one of these cards, diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig index 1f2f2e8209c3..c245edddb48b 100644 --- a/drivers/net/caif/Kconfig +++ b/drivers/net/caif/Kconfig @@ -15,7 +15,7 @@ config CAIF_TTY tristate "CAIF TTY transport driver" depends on CAIF && TTY default n - ---help--- + help The CAIF TTY transport driver is a Line Discipline (ldisc) identified as N_CAIF. When this ldisc is opened from user space it will redirect the TTY's traffic into the CAIF stack. @@ -24,7 +24,7 @@ config CAIF_SPI_SLAVE tristate "CAIF SPI transport driver for slave interface" depends on CAIF && HAS_DMA default n - ---help--- + help The CAIF Link layer SPI Protocol driver for Slave SPI interface. This driver implements a platform driver to accommodate for a platform specific SPI device. A sample CAIF SPI Platform device is @@ -34,7 +34,7 @@ config CAIF_SPI_SYNC bool "Next command and length in start of frame" depends on CAIF_SPI_SLAVE default n - ---help--- + help Putting the next command and length in the start of the frame can help to synchronize to the next transfer in case of over or under-runs. This option also needs to be enabled on the modem. @@ -43,7 +43,7 @@ config CAIF_HSI tristate "CAIF HSI transport driver" depends on CAIF default n - ---help--- + help The CAIF low level driver for CAIF over HSI. Be aware that if you enable this then you also need to enable a low-level HSI driver. @@ -55,7 +55,7 @@ config CAIF_VIRTIO select VIRTIO select GENERIC_ALLOCATOR default n - ---help--- + help The CAIF driver for CAIF over Virtio. endif # CAIF_DRIVERS diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index 17c166cc8482..f07012a76c0c 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -3,7 +3,7 @@ menu "CAN Device Drivers" config CAN_VCAN tristate "Virtual Local CAN Interface (vcan)" - ---help--- + help Similar to the network loopback devices, vcan offers a virtual local CAN interface. @@ -12,7 +12,7 @@ config CAN_VCAN config CAN_VXCAN tristate "Virtual CAN Tunnel (vxcan)" - ---help--- + help Similar to the virtual ethernet driver veth, vxcan implements a local CAN traffic tunnel between two virtual CAN network devices. When creating a vxcan, two vxcan devices are created as pair. @@ -31,7 +31,7 @@ config CAN_VXCAN config CAN_SLCAN tristate "Serial / USB serial CAN Adaptors (slcan)" depends on TTY - ---help--- + help CAN driver for several 'low cost' CAN interfaces that are attached via serial lines or via USB-to-serial adapters using the LAWICEL ASCII protocol. The driver implements the tty linediscipline N_SLCAN. @@ -51,7 +51,7 @@ config CAN_SLCAN config CAN_DEV tristate "Platform CAN drivers with Netlink support" default y - ---help--- + help Enables the common framework for platform CAN drivers with Netlink support. This is the standard library for CAN drivers. If unsure, say Y. @@ -61,7 +61,7 @@ if CAN_DEV config CAN_CALC_BITTIMING bool "CAN bit-timing calculation" default y - ---help--- + help If enabled, CAN bit-timing parameters will be calculated for the bit-rate specified via Netlink argument "bitrate" when the device get started. This works fine for the most common CAN controllers @@ -81,7 +81,7 @@ config CAN_LEDS # fulfills your needs instead of fixing this driver. depends on BROKEN select LEDS_TRIGGERS - ---help--- + help This option adds two LED triggers for packet receive and transmit events on each supported CAN device. @@ -91,20 +91,20 @@ config CAN_LEDS config CAN_AT91 tristate "Atmel AT91 onchip CAN controller" depends on (ARCH_AT91 || COMPILE_TEST) && HAS_IOMEM - ---help--- + help This is a driver for the SoC CAN controller in Atmel's AT91SAM9263 and AT91SAM9X5 processors. config CAN_FLEXCAN tristate "Support for Freescale FLEXCAN based chips" depends on OF && HAS_IOMEM - ---help--- + help Say Y here if you want to support for Freescale FlexCAN. config CAN_GRCAN tristate "Aeroflex Gaisler GRCAN and GRHCAN CAN devices" depends on OF && HAS_DMA - ---help--- + help Say Y here if you want to use Aeroflex Gaisler GRCAN or GRHCAN. Note that the driver supports little endian, even though little endian syntheses of the cores would need some modifications on @@ -113,7 +113,7 @@ config CAN_GRCAN config CAN_JANZ_ICAN3 tristate "Janz VMOD-ICAN3 Intelligent CAN controller" depends on MFD_JANZ_CMODIO - ---help--- + help Driver for Janz VMOD-ICAN3 Intelligent CAN controller module, which connects to a MODULbus carrier board. @@ -136,7 +136,7 @@ config CAN_KVASER_PCIEFD config CAN_SUN4I tristate "Allwinner A10 CAN controller" depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST - ---help--- + help Say Y here if you want to use CAN controller found on Allwinner A10/A20 SoCs. @@ -146,7 +146,7 @@ config CAN_SUN4I config CAN_TI_HECC depends on ARM tristate "TI High End CAN Controller" - ---help--- + help Driver for TI HECC (High End CAN Controller) module found on many TI devices. The device specifications are available from www.ti.com @@ -154,14 +154,14 @@ config CAN_XILINXCAN tristate "Xilinx CAN" depends on ARCH_ZYNQ || ARM64 || MICROBLAZE || COMPILE_TEST depends on COMMON_CLK && HAS_IOMEM - ---help--- + help Xilinx CAN driver. This driver supports both soft AXI CAN IP and Zynq CANPS IP. config PCH_CAN tristate "Intel EG20T PCH CAN controller" depends on PCI && (X86_32 || COMPILE_TEST) - ---help--- + help This driver is for PCH CAN of Topcliff (Intel EG20T PCH) which is an IOH for x86 embedded processor (Intel Atom E6xx series). This driver can access CAN bus. @@ -182,7 +182,7 @@ endif config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" - ---help--- + help Say Y here if you want the CAN device drivers to produce a bunch of debug messages to the system log. Select this if you are having a problem with CAN support and want to see more of what is going diff --git a/drivers/net/can/c_can/Kconfig b/drivers/net/can/c_can/Kconfig index b0f206d36f55..962725788b0a 100644 --- a/drivers/net/can/c_can/Kconfig +++ b/drivers/net/can/c_can/Kconfig @@ -7,7 +7,7 @@ if CAN_C_CAN config CAN_C_CAN_PLATFORM tristate "Generic Platform Bus based C_CAN/D_CAN driver" - ---help--- + help This driver adds support for the C_CAN/D_CAN chips connected to the "platform bus" (Linux abstraction for directly to the processor attached devices) which can be found on various @@ -18,7 +18,7 @@ config CAN_C_CAN_PLATFORM config CAN_C_CAN_PCI tristate "Generic PCI Bus based C_CAN/D_CAN driver" depends on PCI - ---help--- + help This driver adds support for the C_CAN/D_CAN chips connected to the PCI bus. endif diff --git a/drivers/net/can/cc770/Kconfig b/drivers/net/can/cc770/Kconfig index 13a4593a52df..9ef1359319f0 100644 --- a/drivers/net/can/cc770/Kconfig +++ b/drivers/net/can/cc770/Kconfig @@ -7,14 +7,14 @@ if CAN_CC770 config CAN_CC770_ISA tristate "ISA Bus based legacy CC770 driver" - ---help--- + help This driver adds legacy support for CC770 and AN82527 chips connected to the ISA bus using I/O port, memory mapped or indirect access. config CAN_CC770_PLATFORM tristate "Generic Platform Bus based CC770 driver" - ---help--- + help This driver adds support for the CC770 and AN82527 chips connected to the "platform bus" (Linux abstraction for directly to the processor attached devices). diff --git a/drivers/net/can/ifi_canfd/Kconfig b/drivers/net/can/ifi_canfd/Kconfig index ce0197641a59..b5dd9c13d529 100644 --- a/drivers/net/can/ifi_canfd/Kconfig +++ b/drivers/net/can/ifi_canfd/Kconfig @@ -2,7 +2,7 @@ config CAN_IFI_CANFD depends on HAS_IOMEM tristate "IFI CAN_FD IP" - ---help--- + help This driver adds support for the I/F/I CAN_FD soft IP block connected to the "platform bus" (Linux abstraction for directly to the processor attached devices). The CAN_FD is most often diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig index 1ff0b7fe81d6..d9216147ca93 100644 --- a/drivers/net/can/m_can/Kconfig +++ b/drivers/net/can/m_can/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config CAN_M_CAN tristate "Bosch M_CAN support" - ---help--- + help Say Y here if you want support for Bosch M_CAN controller framework. This is common support for devices that embed the Bosch M_CAN IP. @@ -9,7 +9,7 @@ config CAN_M_CAN_PLATFORM tristate "Bosch M_CAN support for io-mapped devices" depends on HAS_IOMEM depends on CAN_M_CAN - ---help--- + help Say Y here if you want support for IO Mapped Bosch M_CAN controller. This support is for devices that have the Bosch M_CAN controller IP embedded into the device and the IP is IO Mapped to the processor. @@ -18,7 +18,7 @@ config CAN_M_CAN_TCAN4X5X depends on CAN_M_CAN depends on REGMAP_SPI tristate "TCAN4X5X M_CAN device" - ---help--- + help Say Y here if you want support for Texas Instruments TCAN4x5x M_CAN controller. This device is a peripherial device that uses the SPI bus for communication. diff --git a/drivers/net/can/mscan/Kconfig b/drivers/net/can/mscan/Kconfig index 3a57a51be22e..dfe6bd9947bb 100644 --- a/drivers/net/can/mscan/Kconfig +++ b/drivers/net/can/mscan/Kconfig @@ -2,7 +2,7 @@ config CAN_MSCAN depends on PPC tristate "Support for Freescale MSCAN based chips" - ---help--- + help The Motorola Scalable Controller Area Network (MSCAN) definition is based on the MSCAN12 definition which is the specific implementation of the Motorola Scalable CAN concept targeted for @@ -13,7 +13,7 @@ if CAN_MSCAN config CAN_MPC5XXX tristate "Freescale MPC5xxx onboard CAN controller" depends on (PPC_MPC52xx || PPC_MPC512x) - ---help--- + help If you say yes here you get support for Freescale's MPC5xxx onboard CAN controller. Currently, the MPC5200, MPC5200B and MPC5121 (Rev. 2 and later) are supported. diff --git a/drivers/net/can/peak_canfd/Kconfig b/drivers/net/can/peak_canfd/Kconfig index c29ab2150794..f7e412766dbd 100644 --- a/drivers/net/can/peak_canfd/Kconfig +++ b/drivers/net/can/peak_canfd/Kconfig @@ -2,7 +2,7 @@ config CAN_PEAK_PCIEFD depends on PCI tristate "PEAK-System PCAN-PCIe FD cards" - ---help--- + help This driver adds support for the PEAK-System PCI Express FD CAN-FD cards family. These 1x or 2x CAN-FD channels cards offer CAN 2.0 a/b as well as diff --git a/drivers/net/can/rcar/Kconfig b/drivers/net/can/rcar/Kconfig index bd5a8fcd83e1..8d36101b78e3 100644 --- a/drivers/net/can/rcar/Kconfig +++ b/drivers/net/can/rcar/Kconfig @@ -2,7 +2,7 @@ config CAN_RCAR tristate "Renesas R-Car CAN controller" depends on ARCH_RENESAS || ARM - ---help--- + help Say Y here if you want to use CAN controller found on Renesas R-Car SoCs. @@ -12,7 +12,7 @@ config CAN_RCAR config CAN_RCAR_CANFD tristate "Renesas R-Car CAN FD controller" depends on ARCH_RENESAS || ARM - ---help--- + help Say Y here if you want to use CAN FD controller found on Renesas R-Car SoCs. The driver puts the controller in CAN FD only mode, which can interoperate with CAN2.0 nodes but does not support diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig index 32d242dc0d9f..110071b26921 100644 --- a/drivers/net/can/sja1000/Kconfig +++ b/drivers/net/can/sja1000/Kconfig @@ -9,7 +9,7 @@ if CAN_SJA1000 config CAN_EMS_PCI tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" depends on PCI - ---help--- + help This driver is for the one, two or four channel CPC-PCI, CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). @@ -17,7 +17,7 @@ config CAN_EMS_PCI config CAN_EMS_PCMCIA tristate "EMS CPC-CARD Card" depends on PCMCIA - ---help--- + help This driver is for the one or two channel CPC-CARD cards from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). @@ -34,14 +34,14 @@ config CAN_F81601 config CAN_KVASER_PCI tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" depends on PCI - ---help--- + help This driver is for the PCIcanx and PCIcan cards (1, 2 or 4 channel) from Kvaser (http://www.kvaser.com). config CAN_PEAK_PCI tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards" depends on PCI - ---help--- + help This driver is for the PCAN-PCI/PCIe/miniPCI cards (1, 2, 3 or 4 channels) from PEAK-System Technik (http://www.peak-system.com). @@ -52,7 +52,7 @@ config CAN_PEAK_PCIEC select I2C select I2C_ALGOBIT default y - ---help--- + help Say Y here if you want to use a PCAN-ExpressCard from PEAK-System Technik. This will also automatically select I2C and I2C_ALGO configuration options. @@ -61,7 +61,7 @@ config CAN_PEAK_PCMCIA tristate "PEAK PCAN-PC Card" depends on PCMCIA depends on HAS_IOPORT_MAP - ---help--- + help This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels) from PEAK-System (http://www.peak-system.com). To compile this driver as a module, choose M here: the module will be called @@ -70,7 +70,7 @@ config CAN_PEAK_PCMCIA config CAN_PLX_PCI tristate "PLX90xx PCI-bridge based Cards" depends on PCI - ---help--- + help This driver is for CAN interface cards based on the PLX90xx PCI bridge. Driver supports now: @@ -87,13 +87,13 @@ config CAN_PLX_PCI config CAN_SJA1000_ISA tristate "ISA Bus based legacy SJA1000 driver" - ---help--- + help This driver adds legacy support for SJA1000 chips connected to the ISA bus using I/O port, memory mapped or indirect access. config CAN_SJA1000_PLATFORM tristate "Generic Platform Bus based SJA1000 driver" - ---help--- + help This driver adds support for the SJA1000 chips connected to the "platform bus" (Linux abstraction for directly to the processor attached devices). Which can be found on various diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig index 0f1708f99308..16b9eec63490 100644 --- a/drivers/net/can/softing/Kconfig +++ b/drivers/net/can/softing/Kconfig @@ -2,7 +2,7 @@ config CAN_SOFTING tristate "Softing Gmbh CAN generic support" depends on HAS_IOMEM - ---help--- + help Support for CAN cards from Softing Gmbh & some cards from Vector Gmbh. Softing Gmbh CAN cards come with 1 or 2 physical busses. @@ -20,7 +20,7 @@ config CAN_SOFTING_CS tristate "Softing Gmbh CAN pcmcia cards" depends on PCMCIA depends on CAN_SOFTING - ---help--- + help Support for PCMCIA cards from Softing Gmbh & some cards from Vector Gmbh. You need firmware for these, which you can get at diff --git a/drivers/net/can/spi/Kconfig b/drivers/net/can/spi/Kconfig index 1c50788055cb..f780c79aac6f 100644 --- a/drivers/net/can/spi/Kconfig +++ b/drivers/net/can/spi/Kconfig @@ -5,13 +5,13 @@ menu "CAN SPI interfaces" config CAN_HI311X tristate "Holt HI311x SPI CAN controllers" depends on CAN_DEV && SPI && HAS_DMA - ---help--- + help Driver for the Holt HI311x SPI CAN controllers. config CAN_MCP251X tristate "Microchip MCP251x and MCP25625 SPI CAN controllers" depends on HAS_DMA - ---help--- + help Driver for the Microchip MCP251x and MCP25625 SPI CAN controllers. diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig index b412f7ba4f89..77fa830fe7dd 100644 --- a/drivers/net/can/usb/Kconfig +++ b/drivers/net/can/usb/Kconfig @@ -4,25 +4,25 @@ menu "CAN USB interfaces" config CAN_8DEV_USB tristate "8 devices USB2CAN interface" - ---help--- + help This driver supports the USB2CAN interface from 8 devices (http://www.8devices.com). config CAN_EMS_USB tristate "EMS CPC-USB/ARM7 CAN/USB interface" - ---help--- + help This driver is for the one channel CPC-USB/ARM7 CAN/USB interface from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). config CAN_ESD_USB2 tristate "ESD USB/2 CAN/USB interface" - ---help--- + help This driver supports the CAN-USB/2 interface from esd electronic system design gmbh (http://www.esd.eu). config CAN_GS_USB tristate "Geschwister Schneider UG interfaces" - ---help--- + help This driver supports the Geschwister Schneider and bytewerk.org candleLight USB CAN interfaces USB/CAN devices If unsure choose N, @@ -31,7 +31,7 @@ config CAN_GS_USB config CAN_KVASER_USB tristate "Kvaser CAN/USB interface" - ---help--- + help This driver adds support for Kvaser CAN/USB devices like Kvaser Leaf Light, Kvaser USBcan II and Kvaser Memorator Pro 5xHS. @@ -82,13 +82,13 @@ config CAN_KVASER_USB config CAN_MCBA_USB tristate "Microchip CAN BUS Analyzer interface" - ---help--- + help This driver supports the CAN BUS Analyzer interface from Microchip (http://www.microchip.com/development-tools/). config CAN_PEAK_USB tristate "PEAK PCAN-USB/USB Pro interfaces for CAN 2.0b/CAN-FD" - ---help--- + help This driver supports the PEAK-System Technik USB adapters that enable access to the CAN bus, with repect to the CAN 2.0b and/or CAN-FD standards, that is: @@ -104,7 +104,7 @@ config CAN_PEAK_USB config CAN_UCAN tristate "Theobroma Systems UCAN interface" - ---help--- + help This driver supports the Theobroma Systems UCAN USB-CAN interface. diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig index 2d38dbc9dd8c..d0024cb30a7b 100644 --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -12,7 +12,7 @@ config NET_DSA_BCM_SF2 select BCM7XXX_PHY select MDIO_BCM_UNIMAC select B53 - ---help--- + help This enables support for the Broadcom Starfighter 2 Ethernet switch chips. @@ -20,7 +20,7 @@ config NET_DSA_LOOP tristate "DSA mock-up Ethernet switch chip support" depends on NET_DSA select FIXED_PHY - ---help--- + help This enables support for a fake mock-up switch chip which exercises the DSA APIs. @@ -28,7 +28,7 @@ config NET_DSA_LANTIQ_GSWIP tristate "Lantiq / Intel GSWIP" depends on HAS_IOMEM && NET_DSA select NET_DSA_TAG_GSWIP - ---help--- + help This enables support for the Lantiq / Intel GSWIP 2.1 found in the xrx200 / VR9 SoC. @@ -36,7 +36,7 @@ config NET_DSA_MT7530 tristate "Mediatek MT7530 Ethernet switch support" depends on NET_DSA select NET_DSA_TAG_MTK - ---help--- + help This enables support for the Mediatek MT7530 Ethernet switch chip. @@ -44,7 +44,7 @@ config NET_DSA_MV88E6060 tristate "Marvell 88E6060 ethernet switch chip support" depends on NET_DSA select NET_DSA_TAG_TRAILER - ---help--- + help This enables support for the Marvell 88E6060 ethernet switch chip. @@ -63,7 +63,7 @@ config NET_DSA_QCA8K depends on NET_DSA select NET_DSA_TAG_QCA select REGMAP - ---help--- + help This enables support for the Qualcomm Atheros QCA8K Ethernet switch chips. @@ -74,7 +74,7 @@ config NET_DSA_REALTEK_SMI select IRQ_DOMAIN select REALTEK_PHY select REGMAP - ---help--- + help This enables support for the Realtek SMI-based switch chips, currently only RTL8366RB. @@ -82,7 +82,7 @@ config NET_DSA_SMSC_LAN9303 tristate select NET_DSA_TAG_LAN9303 select REGMAP - ---help--- + help This enables support for the SMSC/Microchip LAN9303 3 port ethernet switch chips. @@ -91,7 +91,7 @@ config NET_DSA_SMSC_LAN9303_I2C depends on NET_DSA && I2C select NET_DSA_SMSC_LAN9303 select REGMAP_I2C - ---help--- + help Enable access functions if the SMSC/Microchip LAN9303 is configured for I2C managed mode. @@ -99,7 +99,7 @@ config NET_DSA_SMSC_LAN9303_MDIO tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in MDIO managed mode" depends on NET_DSA select NET_DSA_SMSC_LAN9303 - ---help--- + help Enable access functions if the SMSC/Microchip LAN9303 is configured for MDIO managed mode. @@ -109,7 +109,7 @@ config NET_DSA_VITESSE_VSC73XX select FIXED_PHY select VITESSE_PHY select GPIOLIB - ---help--- + help This enables support for the Vitesse VSC7385, VSC7388, VSC7395 and VSC7398 SparX integrated ethernet switches. @@ -118,7 +118,7 @@ config NET_DSA_VITESSE_VSC73XX_SPI depends on NET_DSA depends on SPI select NET_DSA_VITESSE_VSC73XX - ---help--- + help This enables support for the Vitesse VSC7385, VSC7388, VSC7395 and VSC7398 SparX integrated ethernet switches in SPI managed mode. @@ -127,7 +127,7 @@ config NET_DSA_VITESSE_VSC73XX_PLATFORM depends on NET_DSA depends on HAS_IOMEM select NET_DSA_VITESSE_VSC73XX - ---help--- + help This enables support for the Vitesse VSC7385, VSC7388, VSC7395 and VSC7398 SparX integrated ethernet switches, connected over a CPU-attached address bus and work in memory-mapped I/O mode. diff --git a/drivers/net/dsa/qca/Kconfig b/drivers/net/dsa/qca/Kconfig index e3c8d715a18f..13b7e679b8b5 100644 --- a/drivers/net/dsa/qca/Kconfig +++ b/drivers/net/dsa/qca/Kconfig @@ -4,6 +4,6 @@ config NET_DSA_AR9331 depends on NET_DSA select NET_DSA_TAG_AR9331 select REGMAP - ---help--- + help This enables support for the Qualcomm Atheros AR9331 built-in Ethernet switch. diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig index 7cc259893cb9..074b0974769c 100644 --- a/drivers/net/ethernet/3com/Kconfig +++ b/drivers/net/ethernet/3com/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_3COM bool "3Com devices" default y depends on ISA || EISA || PCI || PCMCIA - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,7 +20,7 @@ if NET_VENDOR_3COM config EL3 tristate "3c509/3c579 \"EtherLink III\" support" depends on (ISA || EISA) - ---help--- + help If you have a network (Ethernet) card belonging to the 3Com EtherLinkIII series, say Y here. @@ -34,7 +34,7 @@ config EL3 config 3C515 tristate "3c515 ISA \"Fast EtherLink\"" depends on ISA && ISA_DMA_API && !PPC32 - ---help--- + help If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet network card, say Y here. @@ -44,7 +44,7 @@ config 3C515 config PCMCIA_3C574 tristate "3Com 3c574 PCMCIA support" depends on PCMCIA - ---help--- + help Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA (PC-card) Fast Ethernet card to your computer. @@ -54,7 +54,7 @@ config PCMCIA_3C574 config PCMCIA_3C589 tristate "3Com 3c589 PCMCIA support" depends on PCMCIA - ---help--- + help Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA (PC-card) Ethernet card to your computer. @@ -65,7 +65,7 @@ config VORTEX tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support" depends on (PCI || EISA) && HAS_IOPORT_MAP select MII - ---help--- + help This option enables driver support for a large number of 10Mbps and 10/100Mbps EISA, PCI and Cardbus 3Com network cards: @@ -86,7 +86,7 @@ config TYPHOON tristate "3cr990 series \"Typhoon\" support" depends on PCI select CRC32 - ---help--- + help This option enables driver support for the 3cr990 series of cards: 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97, diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig index a9478577b495..9f4b302fd2ce 100644 --- a/drivers/net/ethernet/8390/Kconfig +++ b/drivers/net/ethernet/8390/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_8390 bool "National Semiconductor 8390 devices" default y depends on NET_VENDOR_NATSEMI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,7 +20,7 @@ if NET_VENDOR_8390 config PCMCIA_AXNET tristate "Asix AX88190 PCMCIA support" depends on PCMCIA - ---help--- + help Say Y here if you intend to attach an Asix AX88190-based PCMCIA (PC-card) Fast Ethernet card to your computer. These cards are nearly NE2000 compatible but need a separate driver due to a few @@ -35,7 +35,7 @@ config AX88796 select CRC32 select PHYLIB select MDIO_BITBANG - ---help--- + help AX88796 driver, using platform bus to provide chip detection and resources @@ -43,7 +43,7 @@ config AX88796_93CX6 bool "ASIX AX88796 external 93CX6 eeprom support" depends on AX88796 select EEPROM_93CX6 - ---help--- + help Select this if your platform comes with an external 93CX6 eeprom. config XSURF100 @@ -63,7 +63,7 @@ config HYDRA tristate "Hydra support" depends on ZORRO select CRC32 - ---help--- + help If you have a Hydra Ethernet adapter, say Y. Otherwise, say N. To compile this driver as a module, choose M here: the module @@ -73,7 +73,7 @@ config ARM_ETHERH tristate "I-cubed EtherH/ANT EtherM support" depends on ARM && ARCH_ACORN select CRC32 - ---help--- + help If you have an Acorn system with one of these network cards, you should say Y to this option if you wish to use it with Linux. @@ -81,7 +81,7 @@ config MAC8390 tristate "Macintosh NS 8390 based ethernet cards" depends on MAC select CRC32 - ---help--- + help If you want to include a driver to support Nubus or LC-PDS Ethernet cards using an NS8390 chipset or its equivalent, say Y. @@ -89,7 +89,7 @@ config MCF8390 tristate "ColdFire NS8390 based Ethernet support" depends on COLDFIRE select CRC32 - ---help--- + help This driver is for Ethernet devices using an NS8390-compatible chipset on many common ColdFire CPU based boards. Many of the older Freescale dev boards use this, and some other common boards like @@ -103,7 +103,7 @@ config NE2000 tristate "NE2000/NE1000 support" depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC) select CRC32 - ---help--- + help If you have a network (Ethernet) card of this type, say Y here. Many Ethernet cards without a specific driver are compatible with the NE2000. @@ -118,7 +118,7 @@ config NE2K_PCI tristate "PCI NE2000 and clones support (see help)" depends on PCI select CRC32 - ---help--- + help This driver is for NE2000 compatible PCI cards. It will not work with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 support" below). If you have a PCI NE2000 network (Ethernet) card, @@ -136,7 +136,7 @@ config APNE tristate "PCMCIA NE2000 support" depends on AMIGA_PCMCIA select CRC32 - ---help--- + help If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, say N. @@ -147,7 +147,7 @@ config PCMCIA_PCNET tristate "NE2000 compatible PCMCIA support" depends on PCMCIA select CRC32 - ---help--- + help Say Y here if you intend to attach an NE2000 compatible PCMCIA (PC-card) Ethernet or Fast Ethernet card to your computer. @@ -158,7 +158,7 @@ config STNIC tristate "National DP83902AV support" depends on SUPERH select CRC32 - ---help--- + help Support for cards based on the National Semiconductor DP83902AV ST-NIC Serial Network Interface Controller for Twisted Pair. This is a 10Mbit/sec Ethernet controller. Product overview and specs at @@ -170,7 +170,7 @@ config ULTRA tristate "SMC Ultra support" depends on ISA select CRC32 - ---help--- + help If you have a network (Ethernet) card of this type, say Y here. Important: There have been many reports that, with some motherboards @@ -187,7 +187,7 @@ config WD80x3 tristate "WD80*3 support" depends on ISA select CRC32 - ---help--- + help If you have a network (Ethernet) card of this type, say Y here. To compile this driver as a module, choose M here. The module @@ -197,7 +197,7 @@ config ZORRO8390 tristate "Zorro NS8390-based Ethernet support" depends on ZORRO select CRC32 - ---help--- + help This driver is for Zorro Ethernet cards using an NS8390-compatible chipset, like the Village Tronic Ariadne II and the Individual Computers X-Surf Ethernet cards. If you have such a card, say Y. diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 4ded81b27d0a..de50e8b9e656 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -7,7 +7,7 @@ menuconfig ETHERNET bool "Ethernet driver support" depends on NET default y - ---help--- + help This section contains all the Ethernet device drivers. if ETHERNET @@ -48,7 +48,7 @@ config CX_ECAT tristate "Beckhoff CX5020 EtherCAT master support" depends on PCI depends on X86 || COMPILE_TEST - ---help--- + help Driver for EtherCAT master module located on CCAT FPGA that can be found on Beckhoff CX5020, and possibly other of CX Beckhoff CX series industrial PCs. @@ -62,7 +62,7 @@ config DNET tristate "Dave ethernet support (DNET)" depends on HAS_IOMEM select PHYLIB - ---help--- + help The Dave ethernet interface (DNET) is found on Qong Board FPGA. Say Y to include support for the DNET chip. @@ -89,7 +89,7 @@ config JME depends on PCI select CRC32 select MII - ---help--- + help This driver supports the PCI-Express gigabit ethernet adapters based on JMicron JMC250 chipset. @@ -99,20 +99,20 @@ config JME config KORINA tristate "Korina (IDT RC32434) Ethernet support" depends on MIKROTIK_RB532 - ---help--- + help If you have a Mikrotik RouterBoard 500 or IDT RC32434 based system say Y. Otherwise say N. config LANTIQ_ETOP tristate "Lantiq SoC ETOP driver" depends on SOC_TYPE_XWAY - ---help--- + help Support for the MII0 inside the Lantiq SoC config LANTIQ_XRX200 tristate "Lantiq / Intel xRX200 PMAC network driver" depends on SOC_TYPE_XWAY - ---help--- + help Support for the PMAC of the Gigabit switch (GSWIP) inside the Lantiq / Intel VRX200 VDSL SoC @@ -130,7 +130,7 @@ config FEALNX depends on PCI select CRC32 select MII - ---help--- + help Say Y here to support the Myson MTD-800 family of PCI-based Ethernet cards. <http://www.myson.com.tw/> @@ -150,7 +150,7 @@ config ETHOC select PHYLIB select CRC32 select BITREVERSE - ---help--- + help Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC. source "drivers/net/ethernet/packetengines/Kconfig" diff --git a/drivers/net/ethernet/adaptec/Kconfig b/drivers/net/ethernet/adaptec/Kconfig index 86e02da4f993..c96edc2e582f 100644 --- a/drivers/net/ethernet/adaptec/Kconfig +++ b/drivers/net/ethernet/adaptec/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_ADAPTEC bool "Adaptec devices" default y depends on PCI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -22,7 +22,7 @@ config ADAPTEC_STARFIRE depends on PCI select CRC32 select MII - ---help--- + help Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network adapter. The DuraLAN chip is used on the 64 bit PCI boards from Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip diff --git a/drivers/net/ethernet/aeroflex/Kconfig b/drivers/net/ethernet/aeroflex/Kconfig index 2fa0a317266b..ea4be67f787b 100644 --- a/drivers/net/ethernet/aeroflex/Kconfig +++ b/drivers/net/ethernet/aeroflex/Kconfig @@ -8,5 +8,5 @@ config GRETH depends on SPARC select PHYLIB select CRC32 - ---help--- + help Say Y here if you want to use the Aeroflex Gaisler GRETH Ethernet MAC. diff --git a/drivers/net/ethernet/agere/Kconfig b/drivers/net/ethernet/agere/Kconfig index 084c7190ce2f..d92516ae59cc 100644 --- a/drivers/net/ethernet/agere/Kconfig +++ b/drivers/net/ethernet/agere/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_AGERE bool "Agere devices" default y depends on PCI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -21,7 +21,7 @@ config ET131X tristate "Agere ET-1310 Gigabit Ethernet support" depends on PCI select PHYLIB - ---help--- + help This driver supports Agere ET-1310 ethernet adapters. To compile this driver as a module, choose M here. The module diff --git a/drivers/net/ethernet/alacritech/Kconfig b/drivers/net/ethernet/alacritech/Kconfig index 212f92c8e6a9..5f285e18faf7 100644 --- a/drivers/net/ethernet/alacritech/Kconfig +++ b/drivers/net/ethernet/alacritech/Kconfig @@ -2,7 +2,7 @@ config NET_VENDOR_ALACRITECH bool "Alacritech devices" default y - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -16,7 +16,7 @@ config SLICOSS tristate "Alacritech Slicoss support" depends on PCI select CRC32 - ---help--- + help This driver supports Gigabit Ethernet adapters based on the Session Layer Interface (SLIC) technology by Alacritech. diff --git a/drivers/net/ethernet/allwinner/Kconfig b/drivers/net/ethernet/allwinner/Kconfig index 264a482ec31d..3e81059f8693 100644 --- a/drivers/net/ethernet/allwinner/Kconfig +++ b/drivers/net/ethernet/allwinner/Kconfig @@ -8,7 +8,7 @@ config NET_VENDOR_ALLWINNER default y depends on ARCH_SUNXI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y here. @@ -28,7 +28,7 @@ config SUN4I_EMAC select MII select PHYLIB select MDIO_SUN4I - ---help--- + help Support for Allwinner A10 EMAC ethernet driver. To compile this driver as a module, choose M here. The module diff --git a/drivers/net/ethernet/alteon/Kconfig b/drivers/net/ethernet/alteon/Kconfig index c3f7067d2d10..cfe1f3159d61 100644 --- a/drivers/net/ethernet/alteon/Kconfig +++ b/drivers/net/ethernet/alteon/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_ALTEON bool "Alteon devices" default y depends on PCI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,7 +20,7 @@ if NET_VENDOR_ALTEON config ACENIC tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support" depends on PCI - ---help--- + help Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet adapter. The driver allows for using the Jumbo Frame option (9000 @@ -34,7 +34,7 @@ config ACENIC config ACENIC_OMIT_TIGON_I bool "Omit support for old Tigon I based AceNICs" depends on ACENIC - ---help--- + help Say Y here if you only have Tigon II based AceNICs and want to leave out support for the older Tigon I based cards which are no longer being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B diff --git a/drivers/net/ethernet/altera/Kconfig b/drivers/net/ethernet/altera/Kconfig index 2690c398d2b2..914e56b91467 100644 --- a/drivers/net/ethernet/altera/Kconfig +++ b/drivers/net/ethernet/altera/Kconfig @@ -3,7 +3,7 @@ config ALTERA_TSE tristate "Altera Triple-Speed Ethernet MAC support" depends on HAS_DMA select PHYLIB - ---help--- + help This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. To compile this driver as a module, choose M here. The module diff --git a/drivers/net/ethernet/amazon/Kconfig b/drivers/net/ethernet/amazon/Kconfig index cca72a75f551..c37fa393b99e 100644 --- a/drivers/net/ethernet/amazon/Kconfig +++ b/drivers/net/ethernet/amazon/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_AMAZON bool "Amazon Devices" default y - ---help--- + help If you have a network (Ethernet) device belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,7 +20,7 @@ config ENA_ETHERNET tristate "Elastic Network Adapter (ENA) support" depends on PCI_MSI && !CPU_BIG_ENDIAN select DIMLIB - ---help--- + help This driver supports Elastic Network Adapter (ENA)" To compile this driver as a module, choose M here. diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig index 9f965cdfff5c..db7d956a9c9b 100644 --- a/drivers/net/ethernet/amd/Kconfig +++ b/drivers/net/ethernet/amd/Kconfig @@ -9,7 +9,7 @@ config NET_VENDOR_AMD depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \ SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \ (ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA || ARM64 - ---help--- + help If you have a network (Ethernet) chipset belonging to this class, say Y. @@ -24,7 +24,7 @@ config A2065 tristate "A2065 support" depends on ZORRO select CRC32 - ---help--- + help If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise, say N. @@ -36,7 +36,7 @@ config AMD8111_ETH depends on PCI select CRC32 select MII - ---help--- + help If you have an AMD 8111-based PCI LANCE ethernet card, answer Y here. @@ -46,7 +46,7 @@ config AMD8111_ETH config LANCE tristate "AMD LANCE and PCnet (AT1500 and NE2100) support" depends on ISA && ISA_DMA_API && !ARM && !PPC32 - ---help--- + help If you have a network (Ethernet) card of this type, say Y here. Some LinkSys cards are of this type. @@ -58,7 +58,7 @@ config PCNET32 depends on PCI select CRC32 select MII - ---help--- + help If you have a PCnet32 or PCnetPCI based network (Ethernet) card, answer Y here. @@ -68,7 +68,7 @@ config PCNET32 config ARIADNE tristate "Ariadne support" depends on ZORRO - ---help--- + help If you have a Village Tronic Ariadne Ethernet adapter, say Y. Otherwise, say N. @@ -79,14 +79,14 @@ config ARM_AM79C961A bool "ARM EBSA110 AM79C961A support" depends on ARM && ARCH_EBSA110 select CRC32 - ---help--- + help If you wish to compile a kernel for the EBSA-110, then you should always answer Y to this. config ATARILANCE tristate "Atari LANCE support" depends on ATARI - ---help--- + help Say Y to include support for several Atari Ethernet adapters based on the AMD LANCE chipset: RieblCard (with or without battery), or PAMCard VME (also the version by Rhotron, with different addresses). @@ -95,7 +95,7 @@ config DECLANCE tristate "DEC LANCE ethernet controller support" depends on MACH_DECSTATION select CRC32 - ---help--- + help This driver is for the series of Ethernet controllers produced by DEC (now Compaq) based on the AMD LANCE chipset, including the DEPCA series. (This chipset is better known via the NE2100 cards.) @@ -104,7 +104,7 @@ config HPLANCE tristate "HP on-board LANCE support" depends on DIO select CRC32 - ---help--- + help If you want to use the builtin "LANCE" Ethernet controller on an HP300 machine, say Y here. @@ -113,7 +113,7 @@ config MIPS_AU1X00_ENET depends on MIPS_ALCHEMY select PHYLIB select CRC32 - ---help--- + help If you have an Alchemy Semi AU1X00 based system say Y. Otherwise, say N. @@ -121,7 +121,7 @@ config MVME147_NET tristate "MVME147 (LANCE) Ethernet support" depends on MVME147 select CRC32 - ---help--- + help Support for the on-board Ethernet interface on the Motorola MVME147 single-board computer. Say Y here to include the driver for this chip in your kernel. @@ -140,7 +140,7 @@ config PCMCIA_NMCLAN config NI65 tristate "NI6510 support" depends on ISA && ISA_DMA_API && !ARM && !PPC32 - ---help--- + help If you have a network (Ethernet) card of this type, say Y here. To compile this driver as a module, choose M here. The module @@ -149,7 +149,7 @@ config NI65 config SUN3LANCE tristate "Sun3/Sun3x on-board LANCE support" depends on (SUN3 || SUN3X) - ---help--- + help Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80) featured an AMD LANCE 10Mbit Ethernet controller on board; say Y here to compile in the Linux driver for this and enable Ethernet. @@ -163,7 +163,7 @@ config SUNLANCE tristate "Sun LANCE support" depends on SBUS select CRC32 - ---help--- + help This driver supports the "le" interface present on all 32-bit Sparc systems, on some older Ultra systems and as an Sbus option. These cards are based on the AMD LANCE chipset, which is better known @@ -181,7 +181,7 @@ config AMD_XGBE select PHYLIB select AMD_XGBE_HAVE_ECC if X86 imply PTP_1588_CLOCK - ---help--- + help This driver supports the AMD 10GbE Ethernet device found on an AMD SoC. @@ -192,7 +192,7 @@ config AMD_XGBE_DCB bool "Data Center Bridging (DCB) support" default n depends on AMD_XGBE && DCB - ---help--- + help Say Y here to enable Data Center Bridging (DCB) support in the driver. diff --git a/drivers/net/ethernet/apple/Kconfig b/drivers/net/ethernet/apple/Kconfig index f78b9c841296..a4176d2ecec6 100644 --- a/drivers/net/ethernet/apple/Kconfig +++ b/drivers/net/ethernet/apple/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_APPLE bool "Apple devices" default y depends on (PPC_PMAC && PPC32) || MAC - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -21,7 +21,7 @@ config MACE tristate "MACE (Power Mac ethernet) support" depends on PPC_PMAC && PPC32 select CRC32 - ---help--- + help Power Macintoshes and clones with Ethernet built-in on the motherboard will usually use a MACE (Medium Access Control for Ethernet) interface. Say Y to include support for the MACE chip. @@ -32,7 +32,7 @@ config MACE config MACE_AAUI_PORT bool "Use AAUI port instead of TP by default" depends on MACE - ---help--- + help Some Apple machines (notably the Apple Network Server) which use the MACE ethernet chip have an Apple AUI port (small 15-pin connector), instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say @@ -44,7 +44,7 @@ config BMAC tristate "BMAC (G3 ethernet) support" depends on PPC_PMAC && PPC32 select CRC32 - ---help--- + help Say Y for support of BMAC Ethernet interfaces. These are used on G3 computers. @@ -55,7 +55,7 @@ config MACMACE tristate "Macintosh (AV) onboard MACE ethernet" depends on MAC select CRC32 - ---help--- + help Support for the onboard AMD 79C940 MACE Ethernet controller used in the 660AV and 840AV Macintosh. If you have one of these Macintoshes say Y here. diff --git a/drivers/net/ethernet/aquantia/Kconfig b/drivers/net/ethernet/aquantia/Kconfig index 76a44b2546ff..efb33c078a3c 100644 --- a/drivers/net/ethernet/aquantia/Kconfig +++ b/drivers/net/ethernet/aquantia/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_AQUANTIA bool "aQuantia devices" default y - ---help--- + help Set this to y if you have an Ethernet network cards that uses the aQuantia AQC107/AQC108 chipset. @@ -21,7 +21,7 @@ config AQTION depends on PCI depends on X86_64 || ARM64 || COMPILE_TEST depends on MACSEC || MACSEC=n - ---help--- + help This enables the support for the aQuantia AQtion(tm) Ethernet card. endif # NET_VENDOR_AQUANTIA diff --git a/drivers/net/ethernet/arc/Kconfig b/drivers/net/ethernet/arc/Kconfig index 45c663d8b9aa..37a41773dd43 100644 --- a/drivers/net/ethernet/arc/Kconfig +++ b/drivers/net/ethernet/arc/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_ARC bool "ARC devices" default y - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -27,7 +27,7 @@ config ARC_EMAC select ARC_EMAC_CORE depends on OF_IRQ && OF_NET depends on ARC || COMPILE_TEST - ---help--- + help On some legacy ARC (Synopsys) FPGA boards such as ARCAngel4/ML50x non-standard on-chip ethernet device ARC EMAC 10/100 is used. Say Y here if you have such a board. If unsure, say N. @@ -37,7 +37,7 @@ config EMAC_ROCKCHIP select ARC_EMAC_CORE depends on OF_IRQ && OF_NET && REGULATOR depends on ARCH_ROCKCHIP || COMPILE_TEST - ---help--- + help Support for Rockchip RK3036/RK3066/RK3188 EMAC ethernet controllers. This selects Rockchip SoC glue layer support for the emac device driver. This driver is used for RK3036/RK3066/RK3188 diff --git a/drivers/net/ethernet/atheros/Kconfig b/drivers/net/ethernet/atheros/Kconfig index 2720bde5034e..fb803bf92ded 100644 --- a/drivers/net/ethernet/atheros/Kconfig +++ b/drivers/net/ethernet/atheros/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_ATHEROS bool "Atheros devices" default y depends on (PCI || ATH79) - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -30,7 +30,7 @@ config ATL2 depends on PCI select CRC32 select MII - ---help--- + help This driver supports the Atheros L2 fast ethernet adapter. To compile this driver as a module, choose M here. The module @@ -41,7 +41,7 @@ config ATL1 depends on PCI select CRC32 select MII - ---help--- + help This driver supports the Atheros/Attansic L1 gigabit ethernet adapter. @@ -53,7 +53,7 @@ config ATL1E depends on PCI select CRC32 select MII - ---help--- + help This driver supports the Atheros L1E gigabit ethernet adapter. To compile this driver as a module, choose M here. The module @@ -64,7 +64,7 @@ config ATL1C depends on PCI select CRC32 select MII - ---help--- + help This driver supports the Atheros L1C gigabit ethernet adapter. To compile this driver as a module, choose M here. The module diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index 2a69c0d06f3c..7fb42f388d59 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -8,7 +8,7 @@ config NET_VENDOR_BROADCOM default y depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \ SIBYTE_SB1xxx_SOC - ---help--- + help If you have a network (Ethernet) chipset belonging to this class, say Y. @@ -25,7 +25,7 @@ config B44 select SSB select MII select PHYLIB - ---help--- + help If you have a network (Ethernet) controller of this type, say Y or M here. @@ -79,7 +79,7 @@ config BNX2 depends on PCI select CRC32 select FW_LOADER - ---help--- + help This driver supports QLogic bnx2 gigabit Ethernet cards. To compile this driver as a module, choose M here: the module @@ -90,7 +90,7 @@ config CNIC depends on PCI && (IPV6 || IPV6=n) select BNX2 select UIO - ---help--- + help This driver supports offload features of QLogic bnx2 gigabit Ethernet cards. @@ -101,7 +101,7 @@ config SB1250_MAC tristate "SB1250 Gigabit Ethernet support" depends on SIBYTE_SB1xxx_SOC select PHYLIB - ---help--- + help This driver supports Gigabit Ethernet interfaces based on the Broadcom SiByte family of System-On-a-Chip parts. They include the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455 @@ -115,7 +115,7 @@ config TIGON3 depends on PCI select PHYLIB imply PTP_1588_CLOCK - ---help--- + help This driver supports Broadcom Tigon3 based gigabit Ethernet cards. To compile this driver as a module, choose M here: the module @@ -125,7 +125,7 @@ config TIGON3_HWMON bool "Broadcom Tigon3 HWMON support" default y depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m) - ---help--- + help Say Y if you want to expose the thermal sensor on Tigon3 devices. config BNX2X @@ -136,7 +136,7 @@ config BNX2X select ZLIB_INFLATE select LIBCRC32C select MDIO - ---help--- + help This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards. To compile this driver as a module, choose M here: the module will be called bnx2x. This is recommended. @@ -145,7 +145,7 @@ config BNX2X_SRIOV bool "Broadcom 578xx and 57712 SR-IOV support" depends on BNX2X && PCI_IOV default y - ---help--- + help This configuration parameter enables Single Root Input Output Virtualization support in the 578xx and 57712 products. This allows for virtual function acceleration in virtual environments. @@ -164,7 +164,7 @@ config BGMAC_BCMA select BGMAC select PHYLIB select FIXED_PHY - ---help--- + help This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. They can be found on BCM47xx SoCs and provide gigabit ethernet. In case of using this driver on BCM4706 it's also requires to enable @@ -178,7 +178,7 @@ config BGMAC_PLATFORM select PHYLIB select FIXED_PHY default ARCH_BCM_IPROC - ---help--- + help Say Y here if you want to use the Broadcom iProc Gigabit Ethernet controller through the generic platform interface @@ -203,7 +203,7 @@ config BNXT select NET_DEVLINK select PAGE_POOL select DIMLIB - ---help--- + help This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit Ethernet cards. To compile this driver as a module, choose M here: the module will be called bnxt_en. This is recommended. @@ -212,7 +212,7 @@ config BNXT_SRIOV bool "Broadcom NetXtreme-C/E SR-IOV support" depends on BNXT && PCI_IOV default y - ---help--- + help This configuration parameter enables Single Root Input Output Virtualization support in the NetXtreme-C/E products. This allows for virtual function acceleration in virtual environments. @@ -221,7 +221,7 @@ config BNXT_FLOWER_OFFLOAD bool "TC Flower offload support for NetXtreme-C/E" depends on BNXT default y - ---help--- + help This configuration parameter enables TC Flower packet classifier offload for eswitch. This option enables SR-IOV switchdev eswitch offload. @@ -230,7 +230,7 @@ config BNXT_DCB bool "Data Center Bridging (DCB) Support" default n depends on BNXT && DCB - ---help--- + help Say Y here if you want to use Data Center Bridging (DCB) in the driver. @@ -240,7 +240,7 @@ config BNXT_HWMON bool "Broadcom NetXtreme-C/E HWMON support" default y depends on BNXT && HWMON && !(BNXT=y && HWMON=m) - ---help--- + help Say Y if you want to expose the thermal sensor data on NetXtreme-C/E devices, via the hwmon sysfs interface. diff --git a/drivers/net/ethernet/brocade/Kconfig b/drivers/net/ethernet/brocade/Kconfig index d4564c7a279c..fb4c3cdf7233 100644 --- a/drivers/net/ethernet/brocade/Kconfig +++ b/drivers/net/ethernet/brocade/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_BROCADE bool "QLogic BR-series devices" default y depends on PCI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the diff --git a/drivers/net/ethernet/brocade/bna/Kconfig b/drivers/net/ethernet/brocade/bna/Kconfig index b124a628f86a..0a48ad93ed6c 100644 --- a/drivers/net/ethernet/brocade/bna/Kconfig +++ b/drivers/net/ethernet/brocade/bna/Kconfig @@ -6,7 +6,7 @@ config BNA tristate "QLogic BR-series 1010/1020/1860 10Gb Ethernet Driver support" depends on PCI - ---help--- + help This driver supports QLogic BR-series 1010/1020/1860 10Gb CEE capable Ethernet cards. To compile this driver as a module, choose M here: the module diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig index 2c4c12b03502..85858163bac5 100644 --- a/drivers/net/ethernet/cadence/Kconfig +++ b/drivers/net/ethernet/cadence/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_CADENCE bool "Cadence devices" depends on HAS_IOMEM default y - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. If unsure, say Y. @@ -23,7 +23,7 @@ config MACB tristate "Cadence MACB/GEM support" depends on HAS_DMA && COMMON_CLK select PHYLINK - ---help--- + help The Cadence MACB ethernet interface is found on many Atmel AT32 and AT91 parts. This driver also supports the Cadence GEM (Gigabit Ethernet MAC found in some ARM SoC devices). Say Y to include @@ -37,13 +37,13 @@ config MACB_USE_HWSTAMP depends on MACB depends on PTP_1588_CLOCK default y - ---help--- + help Enable IEEE 1588 Precision Time Protocol (PTP) support for MACB. config MACB_PCI tristate "Cadence PCI MACB/GEM support" depends on MACB && PCI - ---help--- + help This is PCI wrapper for MACB driver. To compile this driver as a module, choose M here: the module diff --git a/drivers/net/ethernet/cavium/Kconfig b/drivers/net/ethernet/cavium/Kconfig index 4520e7ee00fe..4875cdae622e 100644 --- a/drivers/net/ethernet/cavium/Kconfig +++ b/drivers/net/ethernet/cavium/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_CAVIUM bool "Cavium ethernet drivers" default y - ---help--- + help Select this option if you want enable Cavium network support. If you have a Cavium SoC or network adapter, say Y. @@ -17,7 +17,7 @@ config THUNDER_NIC_PF tristate "Thunder Physical function driver" depends on 64BIT && PCI select THUNDER_NIC_BGX - ---help--- + help This driver supports Thunder's NIC physical function. The NIC provides the controller and DMA engines to move network traffic to/from the memory. The NIC @@ -29,7 +29,7 @@ config THUNDER_NIC_VF tristate "Thunder Virtual function driver" imply CAVIUM_PTP depends on 64BIT && PCI - ---help--- + help This driver supports Thunder's NIC virtual function config THUNDER_NIC_BGX @@ -38,7 +38,7 @@ config THUNDER_NIC_BGX select PHYLIB select MDIO_THUNDER if PCI select THUNDER_NIC_RGX - ---help--- + help This driver supports programming and controlling of MAC interface from NIC physical function driver. @@ -47,7 +47,7 @@ config THUNDER_NIC_RGX depends on 64BIT && PCI select PHYLIB select MDIO_THUNDER if PCI - ---help--- + help This driver supports configuring XCV block of RGX interface present on CN81XX chip. @@ -55,7 +55,7 @@ config CAVIUM_PTP tristate "Cavium PTP coprocessor as PTP clock" depends on 64BIT && PCI depends on PTP_1588_CLOCK - ---help--- + help This driver adds support for the Precision Time Protocol Clocks and Timestamping coprocessor (PTP) found on Cavium processors. PTP provides timestamping mechanism that is suitable for use in IEEE 1588 @@ -70,7 +70,7 @@ config LIQUIDIO select FW_LOADER select LIBCRC32C select NET_DEVLINK - ---help--- + help This driver supports Cavium LiquidIO Intelligent Server Adapters based on CN66XX, CN68XX and CN23XX chips. @@ -92,7 +92,7 @@ config LIQUIDIO_VF tristate "Cavium LiquidIO VF support" depends on 64BIT && PCI_MSI imply PTP_1588_CLOCK - ---help--- + help This driver supports Cavium LiquidIO Intelligent Server Adapter based on CN23XX chips. diff --git a/drivers/net/ethernet/chelsio/Kconfig b/drivers/net/ethernet/chelsio/Kconfig index 82cdfa51ce37..b7f43254598f 100644 --- a/drivers/net/ethernet/chelsio/Kconfig +++ b/drivers/net/ethernet/chelsio/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_CHELSIO bool "Chelsio devices" default y depends on PCI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -22,7 +22,7 @@ config CHELSIO_T1 depends on PCI select CRC32 select MDIO - ---help--- + help This driver supports Chelsio gigabit and 10-gigabit Ethernet cards. More information about adapter features and performance tuning is in @@ -42,7 +42,7 @@ config CHELSIO_T1 config CHELSIO_T1_1G bool "Chelsio gigabit Ethernet support" depends on CHELSIO_T1 - ---help--- + help Enables support for Chelsio's gigabit Ethernet PCI cards. If you are using only 10G cards say 'N' here. @@ -51,7 +51,7 @@ config CHELSIO_T3 depends on PCI && INET select FW_LOADER select MDIO - ---help--- + help This driver supports Chelsio T3-based gigabit and 10Gb Ethernet adapters. @@ -72,7 +72,7 @@ config CHELSIO_T4 select FW_LOADER select MDIO select ZLIB_DEFLATE - ---help--- + help This driver supports Chelsio T4, T5 & T6 based gigabit, 10Gb Ethernet adapter and T5/T6 based 40Gb and T6 based 25Gb, 50Gb and 100Gb Ethernet adapters. @@ -92,7 +92,7 @@ config CHELSIO_T4_DCB bool "Data Center Bridging (DCB) Support for Chelsio T4/T5/T6 cards" default n depends on CHELSIO_T4 && DCB - ---help--- + help Enable DCB support through rtNetlink interface. Say Y here if you want to enable Data Center Bridging (DCB) support in the driver. @@ -103,7 +103,7 @@ config CHELSIO_T4_FCOE bool "Fibre Channel over Ethernet (FCoE) Support for Chelsio T5 cards" default n depends on CHELSIO_T4 && CHELSIO_T4_DCB && FCOE - ---help--- + help Enable FCoE offload features. Say Y here if you want to enable Fibre Channel over Ethernet (FCoE) support in the driver. @@ -113,7 +113,7 @@ config CHELSIO_T4_FCOE config CHELSIO_T4VF tristate "Chelsio Communications T4/T5/T6 Virtual Function Ethernet support" depends on PCI - ---help--- + help This driver supports Chelsio T4, T5 & T6 based gigabit, 10Gb Ethernet adapters and T5/T6 based 40Gb and T6 based 25Gb, 50Gb and 100Gb Ethernet adapters with PCI-E SR-IOV Virtual Functions. @@ -131,7 +131,7 @@ config CHELSIO_T4VF config CHELSIO_LIB tristate - ---help--- + help Common library for Chelsio drivers. endif # NET_VENDOR_CHELSIO diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig index 8d845f5ee0c5..7cf4526596f3 100644 --- a/drivers/net/ethernet/cirrus/Kconfig +++ b/drivers/net/ethernet/cirrus/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_CIRRUS bool "Cirrus devices" default y depends on ISA || EISA || ARM || MAC - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -21,7 +21,7 @@ config CS89x0 tristate "CS89x0 support" depends on ISA || EISA || ARM depends on !PPC32 - ---help--- + help Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the file <file:Documentation/networking/device_drivers/cirrus/cs89x0.rst>. @@ -51,7 +51,7 @@ config EP93XX_ETH config MAC89x0 tristate "Macintosh CS89x0 based ethernet cards" depends on MAC - ---help--- + help Support for CS89x0 chipset based Ethernet cards. If you have a Nubus or LC-PDS network (Ethernet) card of this type, say Y here. diff --git a/drivers/net/ethernet/cisco/Kconfig b/drivers/net/ethernet/cisco/Kconfig index ee5b7b3868c7..18c3a0718d6f 100644 --- a/drivers/net/ethernet/cisco/Kconfig +++ b/drivers/net/ethernet/cisco/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_CISCO bool "Cisco devices" default y depends on PCI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the diff --git a/drivers/net/ethernet/cisco/enic/Kconfig b/drivers/net/ethernet/cisco/enic/Kconfig index edaae706a102..ad80c0fa96a6 100644 --- a/drivers/net/ethernet/cisco/enic/Kconfig +++ b/drivers/net/ethernet/cisco/enic/Kconfig @@ -6,5 +6,5 @@ config ENIC tristate "Cisco VIC Ethernet NIC Support" depends on PCI - ---help--- + help This enables the support for the Cisco VIC Ethernet card. diff --git a/drivers/net/ethernet/cortina/Kconfig b/drivers/net/ethernet/cortina/Kconfig index 89bc4579724d..ac8cb5744a87 100644 --- a/drivers/net/ethernet/cortina/Kconfig +++ b/drivers/net/ethernet/cortina/Kconfig @@ -4,7 +4,7 @@ config NET_VENDOR_CORTINA bool "Cortina Gemini devices" default y - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. @@ -17,7 +17,7 @@ config GEMINI_ETHERNET depends on HAS_IOMEM select PHYLIB select CRC32 - ---help--- + help This driver supports StorLink SL351x (Gemini) dual Gigabit Ethernet. endif # NET_VENDOR_CORTINA diff --git a/drivers/net/ethernet/davicom/Kconfig b/drivers/net/ethernet/davicom/Kconfig index a321a7144fb0..76247103e566 100644 --- a/drivers/net/ethernet/davicom/Kconfig +++ b/drivers/net/ethernet/davicom/Kconfig @@ -8,7 +8,7 @@ config DM9000 depends on ARM || MIPS || COLDFIRE || NIOS2 select CRC32 select MII - ---help--- + help Support for DM9000 chipset. To compile this driver as a module, choose M here. The module @@ -17,7 +17,7 @@ config DM9000 config DM9000_FORCE_SIMPLE_PHY_POLL bool "Force simple NSR based PHY polling" depends on DM9000 - ---help--- + help This configuration forces the DM9000 to use the NSR's LinkStatus bit to determine if the link is up or down instead of the more costly MII PHY reads. Note, this will not work if the chip is diff --git a/drivers/net/ethernet/dec/Kconfig b/drivers/net/ethernet/dec/Kconfig index df1eeb04d5ea..9e5e5f10bd19 100644 --- a/drivers/net/ethernet/dec/Kconfig +++ b/drivers/net/ethernet/dec/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_DEC bool "Digital Equipment devices" default y depends on PCI || EISA || CARDBUS - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the diff --git a/drivers/net/ethernet/dec/tulip/Kconfig b/drivers/net/ethernet/dec/tulip/Kconfig index 177f36f4b89d..8afc5942179a 100644 --- a/drivers/net/ethernet/dec/tulip/Kconfig +++ b/drivers/net/ethernet/dec/tulip/Kconfig @@ -6,7 +6,7 @@ config NET_TULIP bool "DEC - Tulip devices" depends on (PCI || EISA || CARDBUS) - ---help--- + help This selects the "Tulip" family of EISA/PCI network cards. if NET_TULIP @@ -15,7 +15,7 @@ config DE2104X tristate "Early DECchip Tulip (dc2104x) PCI support" depends on PCI select CRC32 - ---help--- + help This driver is developed for the SMC EtherPower series Ethernet cards and also works with cards based on the DECchip 21040 (Tulip series) chips. Some LinkSys PCI cards are @@ -32,7 +32,7 @@ config DE2104X_DSL depends on DE2104X range 0 31 default 0 - ---help--- + help Setting this value allows to align ring buffer descriptors into their own cache lines. Value of 4 corresponds to the typical 32 byte line (the descriptor is 16 bytes). This is necessary on systems that lack @@ -43,7 +43,7 @@ config TULIP tristate "DECchip Tulip (dc2114x) PCI support" depends on PCI select CRC32 - ---help--- + help This driver is developed for the SMC EtherPower series Ethernet cards and also works with cards based on the DECchip 21140 (Tulip series) chips. Some LinkSys PCI cards are @@ -58,7 +58,7 @@ config TULIP config TULIP_MWI bool "New bus configuration" depends on TULIP - ---help--- + help This configures your Tulip card specifically for the card and system cache line size type you are using. @@ -69,7 +69,7 @@ config TULIP_MWI config TULIP_MMIO bool "Use PCI shared mem for NIC registers" depends on TULIP - ---help--- + help Use PCI shared memory for the NIC registers, rather than going through the Tulip's PIO (programmed I/O ports). Faster, but could produce obscure bugs if your mainboard has memory controller timing issues. @@ -78,7 +78,7 @@ config TULIP_MMIO config TULIP_NAPI bool "Use RX polling (NAPI)" depends on TULIP - ---help--- + help NAPI is a new driver API designed to reduce CPU and interrupt load when the driver is receiving lots of packets from the card. It is still somewhat experimental and thus not yet enabled by default. @@ -92,7 +92,7 @@ config TULIP_NAPI config TULIP_NAPI_HW_MITIGATION bool "Use Interrupt Mitigation" depends on TULIP_NAPI - ---help--- + help Use HW to reduce RX interrupts. Not strictly necessary since NAPI reduces RX interrupts by itself. Interrupt mitigation reduces RX interrupts even at low levels of traffic at the cost of a small @@ -109,7 +109,7 @@ config DE4X5 depends on (PCI || EISA) depends on VIRT_TO_BUS || ALPHA || PPC || SPARC select CRC32 - ---help--- + help This is support for the DIGITAL series of PCI/EISA Ethernet cards. These include the DE425, DE434, DE435, DE450 and DE500 models. If you have a network card of this type, say Y. More specific @@ -124,7 +124,7 @@ config WINBOND_840 depends on PCI select CRC32 select MII - ---help--- + help This driver is for the Winbond W89c840 chip. It also works with the TX9882 chip on the Compex RL100-ATX board. More specific information and updates are available from @@ -134,7 +134,7 @@ config DM9102 tristate "Davicom DM910x/DM980x support" depends on PCI select CRC32 - ---help--- + help This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from Davicom (<http://www.davicom.com.tw/>). If you have such a network (Ethernet) card, say Y. Some information is contained in the file @@ -147,7 +147,7 @@ config ULI526X tristate "ULi M526x controller support" depends on PCI select CRC32 - ---help--- + help This driver is for ULi M5261/M5263 10/100M Ethernet Controller (<http://www.nvidia.com/page/uli_drivers.html>). @@ -157,7 +157,7 @@ config ULI526X config PCMCIA_XIRCOM tristate "Xircom CardBus support" depends on CARDBUS - ---help--- + help This driver is for the Digital "Tulip" Ethernet CardBus adapters. It should work with most DEC 21*4*-based chips/ethercards, as well as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig index 1362658a3030..0d77f84c8e7b 100644 --- a/drivers/net/ethernet/dlink/Kconfig +++ b/drivers/net/ethernet/dlink/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_DLINK bool "D-Link devices" default y depends on PCI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -21,7 +21,7 @@ config DL2K tristate "DL2000/TC902x/IP1000A-based Gigabit Ethernet support" depends on PCI select CRC32 - ---help--- + help This driver supports DL2000/TC902x/IP1000A-based Gigabit ethernet cards, which includes D-Link DGE-550T Gigabit Ethernet Adapter. @@ -37,7 +37,7 @@ config SUNDANCE depends on PCI select CRC32 select MII - ---help--- + help This driver is for the Sundance "Alta" chip. More specific information and updates are available from <http://www.scyld.com/network/sundance.html>. @@ -45,7 +45,7 @@ config SUNDANCE config SUNDANCE_MMIO bool "Use MMIO instead of PIO" depends on SUNDANCE - ---help--- + help Enable memory-mapped I/O for interaction with Sundance NIC registers. Do NOT enable this by default, PIO (enabled when MMIO is disabled) is known to solve bugs on certain chips. diff --git a/drivers/net/ethernet/emulex/Kconfig b/drivers/net/ethernet/emulex/Kconfig index 22c143f2d787..5797a76dc731 100644 --- a/drivers/net/ethernet/emulex/Kconfig +++ b/drivers/net/ethernet/emulex/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_EMULEX bool "Emulex devices" default y depends on PCI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the diff --git a/drivers/net/ethernet/ezchip/Kconfig b/drivers/net/ethernet/ezchip/Kconfig index 6db75fd2f9af..38aa824efb25 100644 --- a/drivers/net/ethernet/ezchip/Kconfig +++ b/drivers/net/ethernet/ezchip/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_EZCHIP bool "EZchip devices" default y - ---help--- + help If you have a network (Ethernet) device belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,7 +20,7 @@ config EZCHIP_NPS_MANAGEMENT_ENET tristate "EZchip NPS management enet support" depends on OF_IRQ && OF_NET depends on HAS_IOMEM - ---help--- + help Simple LAN device for debug or management purposes. Device supports interrupts for RX and TX(completion). Device does not have DMA ability. diff --git a/drivers/net/ethernet/faraday/Kconfig b/drivers/net/ethernet/faraday/Kconfig index 73e4f2648e49..c2677ec0564d 100644 --- a/drivers/net/ethernet/faraday/Kconfig +++ b/drivers/net/ethernet/faraday/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_FARADAY bool "Faraday devices" default y depends on ARM || NDS32 || COMPILE_TEST - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -22,7 +22,7 @@ config FTMAC100 depends on ARM || NDS32 || COMPILE_TEST depends on !64BIT || BROKEN select MII - ---help--- + help This driver supports the FTMAC100 10/100 Ethernet controller from Faraday. It is used on Faraday A320, Andes AG101 and some other ARM/NDS32 SoC's. @@ -33,7 +33,7 @@ config FTGMAC100 depends on !64BIT || BROKEN select PHYLIB select MDIO_ASPEED if MACH_ASPEED_G6 - ---help--- + help This driver supports the FTGMAC100 Gigabit Ethernet controller from Faraday. It is used on Faraday A369, Andes AG102 and some other ARM/NDS32 SoC's. diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig index bfc6bfe94d0a..a1d53ddf1593 100644 --- a/drivers/net/ethernet/freescale/Kconfig +++ b/drivers/net/ethernet/freescale/Kconfig @@ -10,7 +10,7 @@ config NET_VENDOR_FREESCALE M523x || M527x || M5272 || M528x || M520x || M532x || \ ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM) || \ ARCH_LAYERSCAPE || COMPILE_TEST - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -27,7 +27,7 @@ config FEC default ARCH_MXC || SOC_IMX28 if ARM select PHYLIB imply PTP_1588_CLOCK - ---help--- + help Say Y here if you want to use the built-in 10/100 Fast ethernet controller on some Motorola ColdFire and Freescale i.MX processors. @@ -37,7 +37,7 @@ config FEC_MPC52xx select CRC32 select PHYLIB select PPC_BESTCOMM_FEC - ---help--- + help This option enables support for the MPC5200's on-chip Fast Ethernet Controller If compiled as module, it will be called fec_mpc52xx. @@ -46,7 +46,7 @@ config FEC_MPC52xx_MDIO bool "FEC MPC52xx MDIO bus driver" depends on FEC_MPC52xx default y - ---help--- + help The MPC5200's FEC can connect to the Ethernet either with an external MII PHY chip or 10 Mbps 7-wire interface (Motorola? industry standard). @@ -60,7 +60,7 @@ source "drivers/net/ethernet/freescale/fman/Kconfig" config FSL_PQ_MDIO tristate "Freescale PQ MDIO" select PHYLIB - ---help--- + help This driver supports the MDIO bus used by the gianfar and UCC drivers. config FSL_XGMAC_MDIO @@ -68,7 +68,7 @@ config FSL_XGMAC_MDIO select PHYLIB depends on OF select OF_MDIO - ---help--- + help This driver supports the MDIO bus on the Fman 10G Ethernet MACs, and on the FMan mEMAC (which supports both Clauses 22 and 45) @@ -78,7 +78,7 @@ config UCC_GETH select FSL_PQ_MDIO select PHYLIB select FIXED_PHY - ---help--- + help This driver supports the Gigabit Ethernet mode of the QUICC Engine, which is available on some Freescale SOCs. @@ -93,7 +93,7 @@ config GIANFAR select PHYLIB select FIXED_PHY select CRC32 - ---help--- + help This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx, and MPC86xx family of chips, the eTSEC on LS1021A and the FEC on the 8540. diff --git a/drivers/net/ethernet/freescale/dpaa/Kconfig b/drivers/net/ethernet/freescale/dpaa/Kconfig index 0a54c7e0e4ae..626ec58a0afc 100644 --- a/drivers/net/ethernet/freescale/dpaa/Kconfig +++ b/drivers/net/ethernet/freescale/dpaa/Kconfig @@ -5,7 +5,7 @@ menuconfig FSL_DPAA_ETH select PHYLIB select FIXED_PHY select FSL_FMAN_MAC - ---help--- + help Data Path Acceleration Architecture Ethernet driver, supporting the Freescale QorIQ chips. Depends on Freescale Buffer Manager and Queue Manager diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig index cee99f20d2c2..0a1400cb410a 100644 --- a/drivers/net/ethernet/fujitsu/Kconfig +++ b/drivers/net/ethernet/fujitsu/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_FUJITSU bool "Fujitsu devices" default y depends on PCMCIA - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,7 +20,7 @@ config PCMCIA_FMVJ18X tristate "Fujitsu FMV-J18x PCMCIA support" depends on PCMCIA select CRC32 - ---help--- + help Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible PCMCIA (PC-card) Ethernet card to your computer. diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig index 2fff43509098..44f9279cdde1 100644 --- a/drivers/net/ethernet/hisilicon/Kconfig +++ b/drivers/net/ethernet/hisilicon/Kconfig @@ -8,7 +8,7 @@ config NET_VENDOR_HISILICON default y depends on OF || ACPI depends on ARM || ARM64 || COMPILE_TEST - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -42,7 +42,7 @@ config HIP04_ETH select MARVELL_PHY select MFD_SYSCON select HNS_MDIO - ---help--- + help If you wish to compile a kernel for a hardware with hisilicon p04 SoC and want to use the internal ethernet then you should answer Y to this. @@ -59,13 +59,13 @@ config HI13X1_GMAC config HNS_MDIO tristate select PHYLIB - ---help--- + help This selects the HNS MDIO support. It is needed by HNS_DSAF to access the PHY config HNS tristate - ---help--- + help This selects the framework support for Hisilicon Network Subsystem. It is needed by any driver which provides HNS acceleration engine or make use of the engine @@ -74,7 +74,7 @@ config HNS_DSAF tristate "Hisilicon HNS DSAF device Support" select HNS select HNS_MDIO - ---help--- + help This selects the DSAF (Distributed System Area Frabric) network acceleration engine support. The engine is used in Hisilicon hip05, Hi1610 and further ICT SoC @@ -83,14 +83,14 @@ config HNS_ENET tristate "Hisilicon HNS Ethernet Device Support" select PHYLIB select HNS - ---help--- + help This selects the general ethernet driver for HNS. This module make use of any HNS AE driver, such as HNS_DSAF config HNS3 tristate "Hisilicon Network Subsystem Support HNS3 (Framework)" depends on PCI - ---help--- + help This selects the framework support for Hisilicon Network Subsystem 3. This layer facilitates clients like ENET, RoCE and user-space ethernet drivers(like ODP)to register with HNAE devices and their associated @@ -102,7 +102,7 @@ config HNS3_HCLGE tristate "Hisilicon HNS3 HCLGE Acceleration Engine & Compatibility Layer Support" default m depends on PCI_MSI - ---help--- + help This selects the HNS3_HCLGE network acceleration engine & its hardware compatibility layer. The engine would be used in Hisilicon hip08 family of SoCs and further upcoming SoCs. @@ -111,7 +111,7 @@ config HNS3_DCB bool "Hisilicon HNS3 Data Center Bridge Support" default n depends on HNS3_HCLGE && DCB - ---help--- + help Say Y here if you want to use Data Center Bridging (DCB) in the HNS3 driver. If unsure, say N. @@ -120,7 +120,7 @@ config HNS3_HCLGEVF tristate "Hisilicon HNS3VF Acceleration Engine & Compatibility Layer Support" depends on PCI_MSI depends on HNS3_HCLGE - ---help--- + help This selects the HNS3 VF drivers network acceleration engine & its hardware compatibility layer. The engine would be used in Hisilicon hip08 family of SoCs and further upcoming SoCs. @@ -130,7 +130,7 @@ config HNS3_ENET default m depends on 64BIT && PCI depends on INET - ---help--- + help This selects the Ethernet Driver for Hisilicon Network Subsystem 3 for hip08 family of SoCs. This module depends upon HNAE3 driver to access the HNAE3 devices and their associated operations. diff --git a/drivers/net/ethernet/huawei/Kconfig b/drivers/net/ethernet/huawei/Kconfig index bdcbface62d7..c05fce15eb51 100644 --- a/drivers/net/ethernet/huawei/Kconfig +++ b/drivers/net/ethernet/huawei/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_HUAWEI bool "Huawei devices" default y - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all diff --git a/drivers/net/ethernet/huawei/hinic/Kconfig b/drivers/net/ethernet/huawei/hinic/Kconfig index cabc2f72d9d7..936e2dd3bb13 100644 --- a/drivers/net/ethernet/huawei/hinic/Kconfig +++ b/drivers/net/ethernet/huawei/hinic/Kconfig @@ -6,7 +6,7 @@ config HINIC tristate "Huawei Intelligent PCIE Network Interface Card" depends on (PCI_MSI && (X86 || ARM64)) - ---help--- + help This driver supports HiNIC PCIE Ethernet cards. To compile this driver as part of the kernel, choose Y here. If unsure, choose N. diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig index 33faff985438..3b5fab123824 100644 --- a/drivers/net/ethernet/i825xx/Kconfig +++ b/drivers/net/ethernet/i825xx/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_I825XX bool "Intel (82586/82593/82596) devices" default y depends on NET_VENDOR_INTEL - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question does not directly affect the @@ -20,14 +20,14 @@ if NET_VENDOR_I825XX config ARM_ETHER1 tristate "Acorn Ether1 support" depends on ARM && ARCH_ACORN - ---help--- + help If you have an Acorn system with one of these (AKA25) network cards, you should say Y to this option if you wish to use it with Linux. config BVME6000_NET tristate "BVME6000 Ethernet support" depends on BVME6000 - ---help--- + help This is the driver for the Ethernet interface on BVME4000 and BVME6000 VME boards. Say Y here to include the driver for this chip in your kernel. @@ -36,14 +36,14 @@ config BVME6000_NET config LASI_82596 tristate "Lasi ethernet" depends on GSC - ---help--- + help Say Y here to support the builtin Intel 82596 ethernet controller found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet. config MVME16x_NET tristate "MVME16x Ethernet support" depends on MVME16x - ---help--- + help This is the driver for the Ethernet interface on the Motorola MVME162, 166, 167, 172 and 177 boards. Say Y here to include the driver for this chip in your kernel. @@ -52,14 +52,14 @@ config MVME16x_NET config SNI_82596 tristate "SNI RM ethernet" depends on SNI_RM - ---help--- + help Say Y here to support the on-board Intel 82596 ethernet controller built into SNI RM machines. config SUN3_82586 bool "Sun3 on-board Intel 82586 support" depends on SUN3 - ---help--- + help This driver enables support for the on-board Intel 82586 based Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note that this driver does not support 82586-based adapters on additional diff --git a/drivers/net/ethernet/ibm/Kconfig b/drivers/net/ethernet/ibm/Kconfig index a95d941360f8..c0c112d95b89 100644 --- a/drivers/net/ethernet/ibm/Kconfig +++ b/drivers/net/ethernet/ibm/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_IBM bool "IBM devices" default y depends on PPC_PSERIES || PPC_DCR || (IBMEBUS && SPARSEMEM) - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,7 +20,7 @@ if NET_VENDOR_IBM config IBMVETH tristate "IBM LAN Virtual Ethernet support" depends on PPC_PSERIES - ---help--- + help This driver supports virtual ethernet adapters on newer IBM iSeries and pSeries systems. @@ -32,7 +32,7 @@ source "drivers/net/ethernet/ibm/emac/Kconfig" config EHEA tristate "eHEA Ethernet support" depends on IBMEBUS && SPARSEMEM - ---help--- + help This driver supports the IBM pSeries eHEA ethernet adapter. To compile the driver as a module, choose M here. The module @@ -41,7 +41,7 @@ config EHEA config IBMVNIC tristate "IBM Virtual NIC support" depends on PPC_PSERIES - ---help--- + help This driver supports Virtual NIC adapters on IBM i and IBM System p systems. diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index ad34e4335df2..48a8f9aa1dd0 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_INTEL bool "Intel devices" default y - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,7 +20,7 @@ config E100 tristate "Intel(R) PRO/100+ support" depends on PCI select MII - ---help--- + help This driver supports Intel(R) PRO/100 family of adapters. To verify that your adapter is supported, find the board ID number on the adapter. Look for a label that has a barcode and a number @@ -42,7 +42,7 @@ config E100 config E1000 tristate "Intel(R) PRO/1000 Gigabit Ethernet support" depends on PCI - ---help--- + help This driver supports Intel(R) PRO/1000 gigabit ethernet family of adapters. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: @@ -60,7 +60,7 @@ config E1000E depends on PCI && (!SPARC32 || BROKEN) select CRC32 imply PTP_1588_CLOCK - ---help--- + help This driver supports the PCI-Express Intel(R) PRO/1000 gigabit ethernet family of adapters. For PCI or PCI-X e1000 adapters, use the regular e1000 driver For more information on how to @@ -79,7 +79,7 @@ config E1000E_HWTS bool "Support HW cross-timestamp on PCH devices" default y depends on E1000E && X86 - ---help--- + help Say Y to enable hardware supported cross-timestamping on PCH devices. The cross-timestamp is available through the PTP clock driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE). @@ -90,7 +90,7 @@ config IGB imply PTP_1588_CLOCK select I2C select I2C_ALGOBIT - ---help--- + help This driver supports Intel(R) 82575/82576 gigabit ethernet family of adapters. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: @@ -107,7 +107,7 @@ config IGB_HWMON bool "Intel(R) PCI-Express Gigabit adapters HWMON support" default y depends on IGB && HWMON && !(IGB=y && HWMON=m) - ---help--- + help Say Y if you want to expose thermal sensor data on Intel devices. Some of our devices contain thermal sensors, both external and internal. @@ -118,7 +118,7 @@ config IGB_DCA bool "Direct Cache Access (DCA) Support" default y depends on IGB && DCA && !(IGB=y && DCA=m) - ---help--- + help Say Y here if you want to use Direct Cache Access (DCA) in the driver. DCA is a method for warming the CPU cache before data is used, with the intent of lessening the impact of cache misses. @@ -126,7 +126,7 @@ config IGB_DCA config IGBVF tristate "Intel(R) 82576 Virtual Function Ethernet support" depends on PCI - ---help--- + help This driver supports Intel(R) 82576 virtual functions. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: @@ -142,7 +142,7 @@ config IGBVF config IXGB tristate "Intel(R) PRO/10GbE support" depends on PCI - ---help--- + help This driver supports Intel(R) PRO/10GbE family of adapters for PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver instead. For more information on how to identify your adapter, go @@ -162,7 +162,7 @@ config IXGBE select MDIO select PHYLIB imply PTP_1588_CLOCK - ---help--- + help This driver supports Intel(R) 10GbE PCI Express family of adapters. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: @@ -179,7 +179,7 @@ config IXGBE_HWMON bool "Intel(R) 10GbE PCI Express adapters HWMON support" default y depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m) - ---help--- + help Say Y if you want to expose the thermal sensor data on some of our cards, via a hwmon sysfs interface. @@ -187,7 +187,7 @@ config IXGBE_DCA bool "Direct Cache Access (DCA) Support" default y depends on IXGBE && DCA && !(IXGBE=y && DCA=m) - ---help--- + help Say Y here if you want to use Direct Cache Access (DCA) in the driver. DCA is a method for warming the CPU cache before data is used, with the intent of lessening the impact of cache misses. @@ -196,7 +196,7 @@ config IXGBE_DCB bool "Data Center Bridging (DCB) Support" default n depends on IXGBE && DCB - ---help--- + help Say Y here if you want to use Data Center Bridging (DCB) in the driver. @@ -208,13 +208,13 @@ config IXGBE_IPSEC depends on XFRM_OFFLOAD default y select XFRM_ALGO - ---help--- + help Enable support for IPSec offload in ixgbe.ko config IXGBEVF tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support" depends on PCI_MSI - ---help--- + help This driver supports Intel(R) PCI Express virtual functions for the Intel(R) ixgbe driver. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: @@ -234,14 +234,14 @@ config IXGBEVF_IPSEC depends on XFRM_OFFLOAD default y select XFRM_ALGO - ---help--- + help Enable support for IPSec offload in ixgbevf.ko config I40E tristate "Intel(R) Ethernet Controller XL710 Family support" imply PTP_1588_CLOCK depends on PCI - ---help--- + help This driver supports Intel(R) Ethernet Controller XL710 Family of devices. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: @@ -258,7 +258,7 @@ config I40E_DCB bool "Data Center Bridging (DCB) Support" default n depends on I40E && DCB - ---help--- + help Say Y here if you want to use Data Center Bridging (DCB) in the driver. @@ -272,7 +272,7 @@ config I40EVF tristate "Intel(R) Ethernet Adaptive Virtual Function support" select IAVF depends on PCI_MSI - ---help--- + help This driver supports virtual functions for Intel XL710, X710, X722, XXV710, and all devices advertising support for Intel Ethernet Adaptive Virtual Function devices. For more @@ -295,7 +295,7 @@ config ICE default n depends on PCI_MSI select NET_DEVLINK - ---help--- + help This driver supports Intel(R) Ethernet Connection E800 Series of devices. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: @@ -313,7 +313,7 @@ config FM10K default n depends on PCI_MSI imply PTP_1588_CLOCK - ---help--- + help This driver supports Intel(R) FM10000 Ethernet Switch Host Interface. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: @@ -330,7 +330,7 @@ config IGC tristate "Intel(R) Ethernet Controller I225-LM/I225-V support" default n depends on PCI - ---help--- + help This driver supports Intel(R) Ethernet Controller I225-LM/I225-V family of adapters. diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig index 3d5caea096fb..cd8ddd1ef6f2 100644 --- a/drivers/net/ethernet/marvell/Kconfig +++ b/drivers/net/ethernet/marvell/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_MARVELL bool "Marvell devices" default y depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET || COMPILE_TEST - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -23,7 +23,7 @@ config MV643XX_ETH depends on INET select PHYLIB select MVMDIO - ---help--- + help This driver supports the gigabit ethernet MACs in the Marvell Discovery PPC/MIPS chipset family (MV643XX) and in the Marvell Orion ARM SoC family. @@ -35,7 +35,7 @@ config MVMDIO tristate "Marvell MDIO interface support" depends on HAS_IOMEM select PHYLIB - ---help--- + help This driver supports the MDIO interface found in the network interface units of the Marvell EBU SoCs (Kirkwood, Orion5x, Dove, Armada 370 and Armada XP). @@ -46,7 +46,7 @@ config MVNETA_BM_ENABLE tristate "Marvell Armada 38x/XP network interface BM support" depends on MVNETA depends on !64BIT - ---help--- + help This driver supports auxiliary block of the network interface units in the Marvell ARMADA XP and ARMADA 38x SoC family, which is called buffer manager. @@ -62,7 +62,7 @@ config MVNETA select MVMDIO select PHYLINK select PAGE_POOL - ---help--- + help This driver supports the network interface units in the Marvell ARMADA XP, ARMADA 370, ARMADA 38x and ARMADA 37xx SoC family. @@ -87,7 +87,7 @@ config MVPP2 depends on ARCH_MVEBU || COMPILE_TEST select MVMDIO select PHYLINK - ---help--- + help This driver supports the network interface units in the Marvell ARMADA 375, 7K and 8K SoCs. @@ -96,7 +96,7 @@ config PXA168_ETH depends on HAS_IOMEM depends on CPU_PXA168 || ARCH_BERLIN || COMPILE_TEST select PHYLIB - ---help--- + help This driver supports the pxa168 Ethernet ports. To compile this driver as a module, choose M here. The module @@ -106,7 +106,7 @@ config SKGE tristate "Marvell Yukon Gigabit Ethernet support" depends on PCI select CRC32 - ---help--- + help This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx and related Gigabit Ethernet adapters. It is a new smaller driver with better performance and more complete ethtool support. @@ -127,7 +127,7 @@ config SKGE config SKGE_DEBUG bool "Debugging interface" depends on SKGE && DEBUG_FS - ---help--- + help This option adds the ability to dump driver state for debugging. The file /sys/kernel/debug/skge/ethX displays the state of the internal transmit and receive rings. @@ -137,7 +137,7 @@ config SKGE_DEBUG config SKGE_GENESIS bool "Support for older SysKonnect Genesis boards" depends on SKGE - ---help--- + help This enables support for the older and uncommon SysKonnect Genesis chips, which support MII via an external transceiver, instead of an internal one. Disabling this option will save some memory @@ -147,7 +147,7 @@ config SKY2 tristate "Marvell Yukon 2 support" depends on PCI select CRC32 - ---help--- + help This driver supports Gigabit Ethernet adapters based on the Marvell Yukon 2 chipset: Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/ @@ -162,7 +162,7 @@ config SKY2 config SKY2_DEBUG bool "Debugging interface" depends on SKY2 && DEBUG_FS - ---help--- + help This option adds the ability to dump driver state for debugging. The file /sys/kernel/debug/sky2/ethX displays the state of the internal transmit and receive rings. diff --git a/drivers/net/ethernet/marvell/octeontx2/Kconfig b/drivers/net/ethernet/marvell/octeontx2/Kconfig index d9dfb614daa6..543a1d047567 100644 --- a/drivers/net/ethernet/marvell/octeontx2/Kconfig +++ b/drivers/net/ethernet/marvell/octeontx2/Kconfig @@ -21,7 +21,7 @@ config NDC_DIS_DYNAMIC_CACHING bool "Disable caching of dynamic entries in NDC" depends on OCTEONTX2_AF default n - ---help--- + help This config option disables caching of dynamic entries such as NIX SQEs , NPA stack pages etc in NDC. Also locks down NIX SQ/CQ/RQ/RSS and NPA Aura/Pool contexts. diff --git a/drivers/net/ethernet/mediatek/Kconfig b/drivers/net/ethernet/mediatek/Kconfig index 500c15e7ea4a..62a820b1eb16 100644 --- a/drivers/net/ethernet/mediatek/Kconfig +++ b/drivers/net/ethernet/mediatek/Kconfig @@ -2,7 +2,7 @@ config NET_VENDOR_MEDIATEK bool "MediaTek devices" depends on ARCH_MEDIATEK || SOC_MT7621 || SOC_MT7620 - ---help--- + help If you have a Mediatek SoC with ethernet, say Y. if NET_VENDOR_MEDIATEK @@ -10,7 +10,7 @@ if NET_VENDOR_MEDIATEK config NET_MEDIATEK_SOC tristate "MediaTek SoC Gigabit Ethernet support" select PHYLINK - ---help--- + help This driver supports the gigabit ethernet MACs in the MediaTek SoC family. diff --git a/drivers/net/ethernet/mellanox/Kconfig b/drivers/net/ethernet/mellanox/Kconfig index 23cf7917a0c9..ff6613a5cdd3 100644 --- a/drivers/net/ethernet/mellanox/Kconfig +++ b/drivers/net/ethernet/mellanox/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_MELLANOX bool "Mellanox devices" default y depends on PCI || I2C - ---help--- + help If you have a network (Ethernet or RDMA) device belonging to this class, say Y. diff --git a/drivers/net/ethernet/mellanox/mlx4/Kconfig b/drivers/net/ethernet/mellanox/mlx4/Kconfig index e69c3c31e701..400e611ba041 100644 --- a/drivers/net/ethernet/mellanox/mlx4/Kconfig +++ b/drivers/net/ethernet/mellanox/mlx4/Kconfig @@ -8,7 +8,7 @@ config MLX4_EN depends on PCI && NETDEVICES && ETHERNET && INET select MLX4_CORE imply PTP_1588_CLOCK - ---help--- + help This driver supports Mellanox Technologies ConnectX Ethernet devices. @@ -16,7 +16,7 @@ config MLX4_EN_DCB bool "Data Center Bridging (DCB) Support" default y depends on MLX4_EN && DCB - ---help--- + help Say Y here if you want to use Data Center Bridging (DCB) in the driver. If set to N, will not be able to configure QoS and ratelimit attributes. @@ -34,7 +34,7 @@ config MLX4_DEBUG bool "Verbose debugging output" if (MLX4_CORE && EXPERT) depends on MLX4_CORE default y - ---help--- + help This option causes debugging code to be compiled into the mlx4_core driver. The output can be turned on via the debug_level module parameter (which can also be set after @@ -44,6 +44,6 @@ config MLX4_CORE_GEN2 bool "Support for old gen2 Mellanox PCI IDs" if (MLX4_CORE) depends on MLX4_CORE default y - ---help--- + help Say Y here if you want to use old gen2 Mellanox devices in the driver. diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig index b6ffd1622cfd..4dfdbb82ea9d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig +++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig @@ -12,7 +12,7 @@ config MLX5_CORE depends on PTP_1588_CLOCK || !PTP_1588_CLOCK depends on PCI_HYPERV_INTERFACE || !PCI_HYPERV_INTERFACE default n - ---help--- + help Core driver for low level functionality of the ConnectX-4 and Connect-IB cards by Mellanox Technologies. @@ -23,7 +23,7 @@ config MLX5_FPGA bool "Mellanox Technologies Innova support" depends on MLX5_CORE select MLX5_ACCEL - ---help--- + help Build support for the Innova family of network cards by Mellanox Technologies. Innova network cards are comprised of a ConnectX chip and an FPGA chip on one board. If you select this option, the @@ -36,14 +36,14 @@ config MLX5_CORE_EN select PAGE_POOL select DIMLIB default n - ---help--- + help Ethernet support in Mellanox Technologies ConnectX-4 NIC. config MLX5_EN_ARFS bool "Mellanox MLX5 ethernet accelerated receive flow steering (ARFS) support" depends on MLX5_CORE_EN && RFS_ACCEL default y - ---help--- + help Mellanox MLX5 ethernet hardware-accelerated receive flow steering support, Enables ethernet netdevice arfs support and ntuple filtering. @@ -51,7 +51,7 @@ config MLX5_EN_RXNFC bool "Mellanox MLX5 ethernet rx nfc flow steering support" depends on MLX5_CORE_EN default y - ---help--- + help Mellanox MLX5 ethernet rx nfc flow steering support Enables ethtool receive network flow classification, which allows user defined flow rules to direct traffic into arbitrary rx queue via ethtool set/get_rxnfc @@ -61,7 +61,7 @@ config MLX5_MPFS bool "Mellanox Technologies MLX5 MPFS support" depends on MLX5_CORE_EN default y - ---help--- + help Mellanox Technologies Ethernet Multi-Physical Function Switch (MPFS) support in ConnectX NIC. MPFs is required for when multi-PF configuration is enabled to allow passing user configured unicast MAC addresses to the @@ -71,7 +71,7 @@ config MLX5_ESWITCH bool "Mellanox Technologies MLX5 SRIOV E-Switch support" depends on MLX5_CORE_EN && NET_SWITCHDEV default y - ---help--- + help Mellanox Technologies Ethernet SRIOV E-Switch support in ConnectX NIC. E-Switch provides internal SRIOV packet steering and switching for the enabled VFs and PF in two available modes: @@ -107,7 +107,7 @@ config MLX5_CORE_EN_DCB bool "Data Center Bridging (DCB) Support" default y depends on MLX5_CORE_EN && DCB - ---help--- + help Say Y here if you want to use Data Center Bridging (DCB) in the driver. If set to N, will not be able to configure QoS and ratelimit attributes. @@ -119,7 +119,7 @@ config MLX5_CORE_IPOIB bool "Mellanox 5th generation network adapters (connectX series) IPoIB offloads support" depends on MLX5_CORE_EN default n - ---help--- + help MLX5 IPoIB offloads & acceleration support. config MLX5_FPGA_IPSEC diff --git a/drivers/net/ethernet/mellanox/mlxfw/Kconfig b/drivers/net/ethernet/mellanox/mlxfw/Kconfig index 5b604501f33e..c339f3c46e45 100644 --- a/drivers/net/ethernet/mellanox/mlxfw/Kconfig +++ b/drivers/net/ethernet/mellanox/mlxfw/Kconfig @@ -5,7 +5,7 @@ config MLXFW tristate "Mellanox Technologies firmware flash module" - ---help--- + help This driver supports Mellanox Technologies Firmware flashing common logic. diff --git a/drivers/net/ethernet/mellanox/mlxsw/Kconfig b/drivers/net/ethernet/mellanox/mlxsw/Kconfig index f458fd1ce9f8..872e9910bb7c 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/Kconfig +++ b/drivers/net/ethernet/mellanox/mlxsw/Kconfig @@ -6,7 +6,7 @@ config MLXSW_CORE tristate "Mellanox Technologies Switch ASICs support" select NET_DEVLINK - ---help--- + help This driver supports Mellanox Technologies Switch ASICs family. To compile this driver as a module, choose M here: the @@ -17,14 +17,14 @@ config MLXSW_CORE_HWMON depends on MLXSW_CORE && HWMON depends on !(MLXSW_CORE=y && HWMON=m) default y - ---help--- + help Say Y here if you want to expose HWMON interface on mlxsw devices. config MLXSW_CORE_THERMAL bool "Thermal zone support for Mellanox Technologies Switch ASICs" depends on MLXSW_CORE && THERMAL default y - ---help--- + help Say Y here if you want to automatically control fans speed according ambient temperature reported by ASIC. @@ -32,7 +32,7 @@ config MLXSW_PCI tristate "PCI bus implementation for Mellanox Technologies Switch ASICs" depends on PCI && HAS_IOMEM && MLXSW_CORE default m - ---help--- + help This is PCI bus implementation for Mellanox Technologies Switch ASICs. To compile this driver as a module, choose M here: the @@ -42,7 +42,7 @@ config MLXSW_I2C tristate "I2C bus implementation for Mellanox Technologies Switch ASICs" depends on I2C && MLXSW_CORE default m - ---help--- + help This is I2C bus implementation for Mellanox Technologies Switch ASICs. To compile this driver as a module, choose M here: the @@ -52,7 +52,7 @@ config MLXSW_SWITCHIB tristate "Mellanox Technologies SwitchIB and SwitchIB-2 support" depends on MLXSW_CORE && MLXSW_PCI && NET_SWITCHDEV default m - ---help--- + help This driver supports Mellanox Technologies SwitchIB and SwitchIB-2 Infiniband Switch ASICs. @@ -63,7 +63,7 @@ config MLXSW_SWITCHX2 tristate "Mellanox Technologies SwitchX-2 support" depends on MLXSW_CORE && MLXSW_PCI && NET_SWITCHDEV default m - ---help--- + help This driver supports Mellanox Technologies SwitchX-2 Ethernet Switch ASICs. @@ -86,7 +86,7 @@ config MLXSW_SPECTRUM imply PTP_1588_CLOCK select NET_PTP_CLASSIFY if PTP_1588_CLOCK default m - ---help--- + help This driver supports Mellanox Technologies Spectrum/Spectrum-2/Spectrum-3 Ethernet Switch ASICs. @@ -97,7 +97,7 @@ config MLXSW_SPECTRUM_DCB bool "Data Center Bridging (DCB) support" depends on MLXSW_SPECTRUM && DCB default y - ---help--- + help Say Y here if you want to use Data Center Bridging (DCB) in the driver. @@ -105,7 +105,7 @@ config MLXSW_MINIMAL tristate "Mellanox Technologies minimal I2C support" depends on MLXSW_CORE && MLXSW_I2C default m - ---help--- + help This driver supports I2C access for Mellanox Technologies Switch ASICs. diff --git a/drivers/net/ethernet/micrel/Kconfig b/drivers/net/ethernet/micrel/Kconfig index 09f35209d43d..42bc014136fe 100644 --- a/drivers/net/ethernet/micrel/Kconfig +++ b/drivers/net/ethernet/micrel/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_MICREL bool "Micrel devices" default y depends on (HAS_IOMEM && DMA_ENGINE) || SPI || PCI || HAS_IOMEM - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,7 +20,7 @@ if NET_VENDOR_MICREL config KS8842 tristate "Micrel KSZ8841/42 with generic bus interface" depends on HAS_IOMEM && DMA_ENGINE - ---help--- + help This platform driver is for KSZ8841(1-port) / KS8842(2-port) ethernet switch chip (managed, VLAN, QoS) from Micrel or Timberdale(FPGA). @@ -31,7 +31,7 @@ config KS8851 select MII select CRC32 select EEPROM_93CX6 - ---help--- + help SPI driver for Micrel KS8851 SPI attached network chip. config KS8851_MLL @@ -40,7 +40,7 @@ config KS8851_MLL select MII select CRC32 select EEPROM_93CX6 - ---help--- + help This platform driver is for Micrel KS8851 Address/data bus multiplexed network chip. @@ -49,7 +49,7 @@ config KSZ884X_PCI depends on PCI select MII select CRC32 - ---help--- + help This PCI driver is for Micrel KSZ8841/KSZ8842 PCI Ethernet chip. To compile this driver as a module, choose M here. The module diff --git a/drivers/net/ethernet/microchip/Kconfig b/drivers/net/ethernet/microchip/Kconfig index 45fe41f3d9f3..31f9a82dc113 100644 --- a/drivers/net/ethernet/microchip/Kconfig +++ b/drivers/net/ethernet/microchip/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_MICROCHIP bool "Microchip devices" default y - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,7 +20,7 @@ config ENC28J60 tristate "ENC28J60 support" depends on SPI select CRC32 - ---help--- + help Support for the Microchip EN28J60 ethernet chip. To compile this driver as a module, choose M here. The module will be @@ -29,14 +29,14 @@ config ENC28J60 config ENC28J60_WRITEVERIFY bool "Enable write verify" depends on ENC28J60 - ---help--- + help Enable the verify after the buffer write useful for debugging purpose. If unsure, say N. config ENCX24J600 tristate "ENCX24J600 support" depends on SPI - ---help--- + help Support for the Microchip ENC424J600/624J600 ethernet chip. To compile this driver as a module, choose M here. The module will be @@ -47,7 +47,7 @@ config LAN743X depends on PCI select PHYLIB select CRC16 - ---help--- + help Support for the Microchip LAN743x PCI Express Gigabit Ethernet chip To compile this driver as a module, choose M here. The module will be diff --git a/drivers/net/ethernet/moxa/Kconfig b/drivers/net/ethernet/moxa/Kconfig index 1a7cacbc0c59..134802b521cb 100644 --- a/drivers/net/ethernet/moxa/Kconfig +++ b/drivers/net/ethernet/moxa/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_MOXART bool "MOXA ART devices" default y depends on (ARM && ARCH_MOXART) - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -21,7 +21,7 @@ config ARM_MOXART_ETHER tristate "MOXART Ethernet support" depends on ARM && ARCH_MOXART select NET_CORE - ---help--- + help If you wish to compile a kernel for a hardware with MOXA ART SoC and want to use the internal ethernet then you should answer Y to this. diff --git a/drivers/net/ethernet/myricom/Kconfig b/drivers/net/ethernet/myricom/Kconfig index 6bc993eae4c4..81267fd72dbf 100644 --- a/drivers/net/ethernet/myricom/Kconfig +++ b/drivers/net/ethernet/myricom/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_MYRI bool "Myricom devices" default y depends on PCI && INET - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -22,7 +22,7 @@ config MYRI10GE depends on PCI && INET select FW_LOADER select CRC32 - ---help--- + help This driver supports Myricom Myri-10G Dual Protocol interface in Ethernet mode. If the eeprom on your board is not recent enough, you will need a newer firmware image. @@ -37,7 +37,7 @@ config MYRI10GE_DCA bool "Direct Cache Access (DCA) Support" default y depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m) - ---help--- + help Say Y here if you want to use Direct Cache Access (DCA) in the driver. DCA is a method for warming the CPU cache before data is used, with the intent of lessening the impact of cache misses. diff --git a/drivers/net/ethernet/natsemi/Kconfig b/drivers/net/ethernet/natsemi/Kconfig index c519c1f30225..0a92101aa3f1 100644 --- a/drivers/net/ethernet/natsemi/Kconfig +++ b/drivers/net/ethernet/natsemi/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_NATSEMI bool "National Semiconductor devices" default y - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -19,7 +19,7 @@ if NET_VENDOR_NATSEMI config MACSONIC tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)" depends on MAC - ---help--- + help Support for NatSemi SONIC based Ethernet devices. This includes the onboard Ethernet in many Quadras as well as some LC-PDS, a few Nubus and all known Comm Slot Ethernet cards. If you have @@ -31,7 +31,7 @@ config MACSONIC config MIPS_JAZZ_SONIC tristate "MIPS JAZZ onboard SONIC Ethernet support" depends on MACH_JAZZ - ---help--- + help This is the driver for the onboard card of MIPS Magnum 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM systems. @@ -39,7 +39,7 @@ config NATSEMI tristate "National Semiconductor DP8381x series PCI Ethernet support" depends on PCI select CRC32 - ---help--- + help This driver is for the National Semiconductor DP83810 series, which is used in cards from PureData, NetGear, Linksys and others, including the 83815 chip. @@ -49,7 +49,7 @@ config NATSEMI config NS83820 tristate "National Semiconductor DP83820 support" depends on PCI - ---help--- + help This is a driver for the National Semiconductor DP83820 series of gigabit ethernet MACs. Cards using this chipset include the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX, @@ -59,7 +59,7 @@ config NS83820 config XTENSA_XT2000_SONIC tristate "Xtensa XT2000 onboard SONIC Ethernet support" depends on XTENSA_PLATFORM_XT2000 - ---help--- + help This is the driver for the onboard card of the Xtensa XT2000 board. endif # NET_VENDOR_NATSEMI diff --git a/drivers/net/ethernet/neterion/Kconfig b/drivers/net/ethernet/neterion/Kconfig index a82a37094579..5484f18f272e 100644 --- a/drivers/net/ethernet/neterion/Kconfig +++ b/drivers/net/ethernet/neterion/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_NETERION bool "Neterion (Exar) devices" default y depends on PCI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,7 +20,7 @@ if NET_VENDOR_NETERION config S2IO tristate "Neterion (Exar) Xframe 10Gb Ethernet Adapter" depends on PCI - ---help--- + help This driver supports Exar Corp's Xframe Series 10Gb Ethernet Adapters. These were originally released from S2IO, which renamed itself Neterion. So, the adapters might be labeled as either one, depending @@ -35,7 +35,7 @@ config S2IO config VXGE tristate "Neterion (Exar) X3100 Series 10GbE PCIe Server Adapter" depends on PCI - ---help--- + help This driver supports Exar Corp's X3100 Series 10 GbE PCIe I/O Virtualized Server Adapter. These were originally released from Neterion, which was later acquired by Exar. So, the adapters might be @@ -51,7 +51,7 @@ config VXGE_DEBUG_TRACE_ALL bool "Enabling All Debug trace statements in driver" default n depends on VXGE - ---help--- + help Say Y here if you want to enabling all the debug trace statements in the vxge driver. By default only few debug trace statements are enabled. diff --git a/drivers/net/ethernet/netronome/Kconfig b/drivers/net/ethernet/netronome/Kconfig index a3f68a718813..d8b99d6a0356 100644 --- a/drivers/net/ethernet/netronome/Kconfig +++ b/drivers/net/ethernet/netronome/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_NETRONOME bool "Netronome(R) devices" default y - ---help--- + help If you have a Netronome(R) network (Ethernet) card or device, say Y. Note that the answer to this question doesn't directly affect the @@ -22,7 +22,7 @@ config NFP depends on VXLAN || VXLAN=n depends on TLS && TLS_DEVICE || TLS_DEVICE=n select NET_DEVLINK - ---help--- + help This driver supports the Netronome(R) NFP4000/NFP6000 based cards working as a advanced Ethernet NIC. It works with both SR-IOV physical and virtual functions. @@ -33,7 +33,7 @@ config NFP_APP_FLOWER depends on NET_SWITCHDEV depends on IPV6!=m || NFP=m default y - ---help--- + help Enable driver support for TC Flower offload on NFP4000 and NFP6000. Say Y, if you are planning to make use of TC Flower offload either directly, with Open vSwitch, or any other way. Note that @@ -55,7 +55,7 @@ config NFP_APP_ABM_NIC config NFP_DEBUG bool "Debug support for Netronome(R) NFP4000/NFP6000 NIC drivers" depends on NFP - ---help--- + help Enable extra sanity checks and debugfs support in Netronome(R) NFP4000/NFP6000 NIC drivers. Note: selecting this option may adversely impact diff --git a/drivers/net/ethernet/nvidia/Kconfig b/drivers/net/ethernet/nvidia/Kconfig index faacbd129c44..c653786b1d05 100644 --- a/drivers/net/ethernet/nvidia/Kconfig +++ b/drivers/net/ethernet/nvidia/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_NVIDIA bool "NVIDIA devices" default y depends on PCI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,7 +20,7 @@ if NET_VENDOR_NVIDIA config FORCEDETH tristate "nForce Ethernet support" depends on PCI - ---help--- + help If you have a network (Ethernet) controller of this type, say Y here. To compile this driver as a module, choose M here. The module diff --git a/drivers/net/ethernet/oki-semi/Kconfig b/drivers/net/ethernet/oki-semi/Kconfig index 1c455c645bce..c2fff04ba7b6 100644 --- a/drivers/net/ethernet/oki-semi/Kconfig +++ b/drivers/net/ethernet/oki-semi/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_OKI bool "OKI Semiconductor devices" default y depends on PCI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig index 69e11d19bdc6..af84f72bf08e 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig +++ b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig @@ -9,7 +9,7 @@ config PCH_GBE select MII select PTP_1588_CLOCK_PCH select NET_PTP_CLASSIFY - ---help--- + help This is a gigabit ethernet driver for EG20T PCH. EG20T PCH is the platform controller hub that is used in Intel's general embedded platform. EG20T PCH has Gigabit Ethernet interface. diff --git a/drivers/net/ethernet/packetengines/Kconfig b/drivers/net/ethernet/packetengines/Kconfig index ead3750b4489..de91331dcb7d 100644 --- a/drivers/net/ethernet/packetengines/Kconfig +++ b/drivers/net/ethernet/packetengines/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_PACKET_ENGINES bool "Packet Engines devices" default y depends on PCI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -21,7 +21,7 @@ config HAMACHI tristate "Packet Engines Hamachi GNIC-II support" depends on PCI select MII - ---help--- + help If you have a Gigabit Ethernet card of this type, say Y here. To compile this driver as a module, choose M here. The module will be @@ -31,7 +31,7 @@ config YELLOWFIN tristate "Packet Engines Yellowfin Gigabit-NIC support" depends on PCI select CRC32 - ---help--- + help Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is used by the Beowulf Linux cluster project. See diff --git a/drivers/net/ethernet/pasemi/Kconfig b/drivers/net/ethernet/pasemi/Kconfig index f4562243d4a0..cd68ebcf3e47 100644 --- a/drivers/net/ethernet/pasemi/Kconfig +++ b/drivers/net/ethernet/pasemi/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_PASEMI bool "PA Semi devices" default y depends on PPC_PASEMI && PCI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -21,7 +21,7 @@ config PASEMI_MAC tristate "PA Semi 1/10Gbit MAC" depends on PPC_PASEMI && PCI select PHYLIB - ---help--- + help This driver supports the on-chip 1/10Gbit Ethernet controller on PA Semi's PWRficient line of chips. diff --git a/drivers/net/ethernet/qlogic/Kconfig b/drivers/net/ethernet/qlogic/Kconfig index 55a29ec76680..8f743d80760b 100644 --- a/drivers/net/ethernet/qlogic/Kconfig +++ b/drivers/net/ethernet/qlogic/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_QLOGIC bool "QLogic devices" default y depends on PCI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,7 +20,7 @@ if NET_VENDOR_QLOGIC config QLA3XXX tristate "QLogic QLA3XXX Network Driver Support" depends on PCI - ---help--- + help This driver supports QLogic ISP3XXX gigabit Ethernet cards. To compile this driver as a module, choose M here: the module @@ -30,7 +30,7 @@ config QLCNIC tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support" depends on PCI select FW_LOADER - ---help--- + help This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet devices. @@ -38,7 +38,7 @@ config QLCNIC_SRIOV bool "QLOGIC QLCNIC 83XX family SR-IOV Support" depends on QLCNIC && PCI_IOV default y - ---help--- + help This configuration parameter enables Single Root Input Output Virtualization support for QLE83XX Converged Ethernet devices. This allows for virtual function acceleration in virtualized @@ -48,7 +48,7 @@ config QLCNIC_DCB bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support" depends on QLCNIC && DCB default y - ---help--- + help This configuration parameter enables DCB support in QLE83XX and QLE82XX Converged Ethernet devices. This allows for DCB get operations support through rtNetlink interface. Only CEE @@ -59,7 +59,7 @@ config QLCNIC_HWMON bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support" depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m) default y - ---help--- + help This configuration parameter can be used to read the board temperature in Converged Ethernet devices supported by qlcnic. @@ -70,7 +70,7 @@ config NETXEN_NIC tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC" depends on PCI select FW_LOADER - ---help--- + help This enables the support for NetXen's Gigabit Ethernet card. config QED @@ -79,7 +79,7 @@ config QED select ZLIB_INFLATE select CRC8 select NET_DEVLINK - ---help--- + help This enables the support for ... config QED_LL2 @@ -89,7 +89,7 @@ config QED_SRIOV bool "QLogic QED 25/40/100Gb SR-IOV support" depends on QED && PCI_IOV default y - ---help--- + help This configuration parameter enables Single Root Input Output Virtualization support for QED devices. This allows for virtual function acceleration in virtualized @@ -99,7 +99,7 @@ config QEDE tristate "QLogic QED 25/40/100Gb Ethernet NIC" depends on QED imply PTP_1588_CLOCK - ---help--- + help This enables the support for ... config QED_RDMA diff --git a/drivers/net/ethernet/qualcomm/Kconfig b/drivers/net/ethernet/qualcomm/Kconfig index 09a678a94634..a4434eb38950 100644 --- a/drivers/net/ethernet/qualcomm/Kconfig +++ b/drivers/net/ethernet/qualcomm/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_QUALCOMM bool "Qualcomm devices" default y - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -25,7 +25,7 @@ config QCA7000_SPI tristate "Qualcomm Atheros QCA7000 SPI support" select QCA7000 depends on SPI_MASTER && OF - ---help--- + help This SPI protocol driver supports the Qualcomm Atheros QCA7000. To compile this driver as a module, choose M here. The module @@ -35,7 +35,7 @@ config QCA7000_UART tristate "Qualcomm Atheros QCA7000 UART support" select QCA7000 depends on SERIAL_DEV_BUS && OF - ---help--- + help This UART protocol driver supports the Qualcomm Atheros QCA7000. Currently the driver assumes these device UART settings: @@ -52,7 +52,7 @@ config QCOM_EMAC depends on HAS_DMA && HAS_IOMEM select CRC32 select PHYLIB - ---help--- + help This driver supports the Qualcomm Technologies, Inc. Gigabit Ethernet Media Access Controller (EMAC). The controller supports IEEE 802.3-2002, half-duplex mode at 10/100 Mb/s, diff --git a/drivers/net/ethernet/qualcomm/rmnet/Kconfig b/drivers/net/ethernet/qualcomm/rmnet/Kconfig index 9f9279575e2e..b4a575eb0175 100644 --- a/drivers/net/ethernet/qualcomm/rmnet/Kconfig +++ b/drivers/net/ethernet/qualcomm/rmnet/Kconfig @@ -7,7 +7,7 @@ menuconfig RMNET tristate "RmNet MAP driver" default n select GRO_CELLS - ---help--- + help If you select this, you will enable the RMNET module which is used for handling data in the multiplexing and aggregation protocol (MAP) format in the embedded data path. RMNET devices can be attached to diff --git a/drivers/net/ethernet/rdc/Kconfig b/drivers/net/ethernet/rdc/Kconfig index 76df60c2f4ac..6884c7864bb9 100644 --- a/drivers/net/ethernet/rdc/Kconfig +++ b/drivers/net/ethernet/rdc/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_RDC bool "RDC devices" default y depends on PCI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -23,7 +23,7 @@ config R6040 select CRC32 select MII select PHYLIB - ---help--- + help This is a driver for the R6040 Fast Ethernet MACs found in the the RDC R-321x System-on-chips. diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig index 5e0b9d2f14f7..93d9df55b361 100644 --- a/drivers/net/ethernet/realtek/Kconfig +++ b/drivers/net/ethernet/realtek/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_REALTEK bool "Realtek devices" default y depends on PCI || (PARPORT && X86) - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -21,7 +21,7 @@ config ATP tristate "AT-LAN-TEC/RealTek pocket adapter support" depends on PARPORT && X86 select CRC32 - ---help--- + help This is a network (Ethernet) device which attaches to your parallel port. Read the file <file:drivers/net/ethernet/realtek/atp.c> if you want to use this. If you intend to use this driver, you @@ -36,7 +36,7 @@ config 8139CP depends on PCI select CRC32 select MII - ---help--- + help This is a driver for the Fast Ethernet PCI network cards based on the RTL8139C+ chips. If you have one of those, say Y here. @@ -48,7 +48,7 @@ config 8139TOO depends on PCI select CRC32 select MII - ---help--- + help This is a driver for the Fast Ethernet PCI network cards based on the RTL 8129/8130/8139 chips. If you have one of those, say Y here. @@ -59,7 +59,7 @@ config 8139TOO_PIO bool "Use PIO instead of MMIO" default y depends on 8139TOO - ---help--- + help This instructs the driver to use programmed I/O ports (PIO) instead of PCI shared memory (MMIO). This can possibly solve some problems in case your mainboard has memory consistency issues. If unsure, @@ -68,7 +68,7 @@ config 8139TOO_PIO config 8139TOO_TUNE_TWISTER bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)" depends on 8139TOO - ---help--- + help This implements a function which might come in handy in case you are using low quality on long cabling. It is required for RealTek RTL-8139 revision K boards, and totally unused otherwise. It tries @@ -79,7 +79,7 @@ config 8139TOO_TUNE_TWISTER config 8139TOO_8129 bool "Support for older RTL-8129/8130 boards" depends on 8139TOO - ---help--- + help This enables support for the older and uncommon RTL-8129 and RTL-8130 chips, which support MII via an external transceiver, instead of an internal one. Disabling this option will save some @@ -88,7 +88,7 @@ config 8139TOO_8129 config 8139_OLD_RX_RESET bool "Use older RX-reset method" depends on 8139TOO - ---help--- + help The 8139too driver was recently updated to contain a more rapid reset sequence, in the face of severe receive errors. This "new" RX-reset method should be adequate for all boards. But if you @@ -102,7 +102,7 @@ config R8169 select CRC32 select PHYLIB select REALTEK_PHY - ---help--- + help Say Y here if you have a Realtek Ethernet adapter belonging to the following families: RTL8169 Gigabit Ethernet diff --git a/drivers/net/ethernet/renesas/Kconfig b/drivers/net/ethernet/renesas/Kconfig index bb0ebdfd4459..5a2a4af31812 100644 --- a/drivers/net/ethernet/renesas/Kconfig +++ b/drivers/net/ethernet/renesas/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_RENESAS bool "Renesas devices" default y - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -23,7 +23,7 @@ config SH_ETH select MII select MDIO_BITBANG select PHYLIB - ---help--- + help Renesas SuperH Ethernet device driver. This driver supporting CPUs are: - SH7619, SH7710, SH7712, SH7724, SH7734, SH7763, SH7757, diff --git a/drivers/net/ethernet/rocker/Kconfig b/drivers/net/ethernet/rocker/Kconfig index 1083de99830d..99e1290e0307 100644 --- a/drivers/net/ethernet/rocker/Kconfig +++ b/drivers/net/ethernet/rocker/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_ROCKER bool "Rocker devices" default y - ---help--- + help If you have a network device belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -19,7 +19,7 @@ if NET_VENDOR_ROCKER config ROCKER tristate "Rocker switch driver (EXPERIMENTAL)" depends on PCI && NET_SWITCHDEV && BRIDGE - ---help--- + help This driver supports Rocker switch device. To compile this driver as a module, choose M here: the diff --git a/drivers/net/ethernet/samsung/Kconfig b/drivers/net/ethernet/samsung/Kconfig index e92a178a76df..0582e110b1c0 100644 --- a/drivers/net/ethernet/samsung/Kconfig +++ b/drivers/net/ethernet/samsung/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_SAMSUNG bool "Samsung Ethernet devices" default y - ---help--- + help If you have a network (Ethernet) chipset belonging to this class, say Y. @@ -23,7 +23,7 @@ config SXGBE_ETH select PHYLIB select CRC32 imply PTP_1588_CLOCK - ---help--- + help This is the driver for the SXGBE 10G Ethernet IP block found on Samsung platforms. diff --git a/drivers/net/ethernet/seeq/Kconfig b/drivers/net/ethernet/seeq/Kconfig index f3ac9cba5770..ad1df37571dd 100644 --- a/drivers/net/ethernet/seeq/Kconfig +++ b/drivers/net/ethernet/seeq/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_SEEQ bool "SEEQ devices" default y depends on HAS_IOMEM - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,14 +20,14 @@ if NET_VENDOR_SEEQ config ARM_ETHER3 tristate "Acorn/ANT Ether3 support" depends on ARM && ARCH_ACORN - ---help--- + help If you have an Acorn system with one of these network cards, you should say Y to this option if you wish to use it with Linux. config SGISEEQ tristate "SGI Seeq ethernet controller support" depends on SGI_HAS_SEEQ - ---help--- + help Say Y here if you have an Seeq based Ethernet network card. This is used in many Silicon Graphics machines. diff --git a/drivers/net/ethernet/sfc/Kconfig b/drivers/net/ethernet/sfc/Kconfig index ea5a9220196c..81b0f7d3a025 100644 --- a/drivers/net/ethernet/sfc/Kconfig +++ b/drivers/net/ethernet/sfc/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_SOLARFLARE bool "Solarflare devices" default y - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -22,7 +22,7 @@ config SFC select MDIO select CRC32 imply PTP_1588_CLOCK - ---help--- + help This driver supports 10/40-gigabit Ethernet cards based on the Solarflare SFC9000-family and SFC9100-family controllers. @@ -32,7 +32,7 @@ config SFC_MTD bool "Solarflare SFC9000/SFC9100-family MTD support" depends on SFC && MTD && !(SFC=y && MTD=m) default y - ---help--- + help This exposes the on-board flash and/or EEPROM as MTD devices (e.g. /dev/mtd1). This is required to update the firmware or the boot configuration under Linux. @@ -40,14 +40,14 @@ config SFC_MCDI_MON bool "Solarflare SFC9000/SFC9100-family hwmon support" depends on SFC && HWMON && !(SFC=y && HWMON=m) default y - ---help--- + help This exposes the on-board firmware-managed sensors as a hardware monitor device. config SFC_SRIOV bool "Solarflare SFC9000-family SR-IOV support" depends on SFC && PCI_IOV default y - ---help--- + help This enables support for the SFC9000 I/O Virtualization features, allowing accelerated network performance in virtualized environments. @@ -55,7 +55,7 @@ config SFC_MCDI_LOGGING bool "Solarflare SFC9000/SFC9100-family MCDI logging support" depends on SFC default y - ---help--- + help This enables support for tracing of MCDI (Management-Controller-to- Driver-Interface) commands and responses, allowing debugging of driver/firmware interaction. The tracing is actually enabled by diff --git a/drivers/net/ethernet/sfc/falcon/Kconfig b/drivers/net/ethernet/sfc/falcon/Kconfig index 20e361950f7d..071154045dc2 100644 --- a/drivers/net/ethernet/sfc/falcon/Kconfig +++ b/drivers/net/ethernet/sfc/falcon/Kconfig @@ -6,7 +6,7 @@ config SFC_FALCON select CRC32 select I2C select I2C_ALGOBIT - ---help--- + help This driver supports 10-gigabit Ethernet cards based on the Solarflare SFC4000 controller. @@ -16,7 +16,7 @@ config SFC_FALCON_MTD bool "Solarflare SFC4000 MTD support" depends on SFC_FALCON && MTD && !(SFC_FALCON=y && MTD=m) default y - ---help--- + help This exposes the on-board flash and/or EEPROM as MTD devices (e.g. /dev/mtd1). This is required to update the boot configuration under Linux. diff --git a/drivers/net/ethernet/sgi/Kconfig b/drivers/net/ethernet/sgi/Kconfig index bc26fa0d196f..af66bb0a20d1 100644 --- a/drivers/net/ethernet/sgi/Kconfig +++ b/drivers/net/ethernet/sgi/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_SGI bool "SGI devices" default y depends on (PCI && SGI_MFD_IOC3) || SGI_IP32 - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -23,7 +23,7 @@ config SGI_IOC3_ETH select CRC16 select CRC32 select MII - ---help--- + help If you have a network (Ethernet) card of this type, say Y here. config SGI_O2MACE_ETH diff --git a/drivers/net/ethernet/silan/Kconfig b/drivers/net/ethernet/silan/Kconfig index 71929d148c3c..7ed08d588ac2 100644 --- a/drivers/net/ethernet/silan/Kconfig +++ b/drivers/net/ethernet/silan/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_SILAN bool "Silan devices" default y depends on PCI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -21,7 +21,7 @@ config SC92031 tristate "Silan SC92031 PCI Fast Ethernet Adapter driver" depends on PCI select CRC32 - ---help--- + help This is a driver for the Fast Ethernet PCI network cards based on the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you have one of these, say Y here. diff --git a/drivers/net/ethernet/sis/Kconfig b/drivers/net/ethernet/sis/Kconfig index d848ab0349a7..775d76d9890e 100644 --- a/drivers/net/ethernet/sis/Kconfig +++ b/drivers/net/ethernet/sis/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_SIS bool "Silicon Integrated Systems (SiS) devices" default y depends on PCI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -22,7 +22,7 @@ config SIS900 depends on PCI select CRC32 select MII - ---help--- + help This is a driver for the Fast Ethernet PCI network cards based on the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in SiS 630 and SiS 540 chipsets. @@ -38,7 +38,7 @@ config SIS190 depends on PCI select CRC32 select MII - ---help--- + help Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to appear in lan on motherboard designs which are based on SiS 965 diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig index 4d2d91ec8b41..6293b1e6c772 100644 --- a/drivers/net/ethernet/smsc/Kconfig +++ b/drivers/net/ethernet/smsc/Kconfig @@ -9,7 +9,7 @@ config NET_VENDOR_SMSC depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \ ISA || MAC || MIPS || NIOS2 || PCI || \ PCMCIA || SUPERH || XTENSA || H8300 - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -23,7 +23,7 @@ config SMC9194 tristate "SMC 9194 support" depends on ISA select CRC32 - ---help--- + help This is support for the SMC9xxx based Ethernet cards. Choose this option if you have a DELL laptop with the docking station, or another SMC9192/9194 based chipset. Say Y if you want it compiled @@ -40,7 +40,7 @@ config SMC91X depends on !OF || GPIOLIB depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \ MIPS || NIOS2 || SUPERH || XTENSA || H8300 - ---help--- + help This is a driver for SMC's 91x series of Ethernet chipsets, including the SMC91C94 and the SMC91C111. Say Y if you want it compiled into the kernel, and read the file @@ -56,7 +56,7 @@ config PCMCIA_SMC91C92 depends on PCMCIA select CRC32 select MII - ---help--- + help Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA (PC-card) Ethernet or Fast Ethernet card to your computer. @@ -68,7 +68,7 @@ config EPIC100 depends on PCI select CRC32 select MII - ---help--- + help This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC, which is based on the SMC83c17x (EPIC/100). More specific information and updates are available from @@ -79,7 +79,7 @@ config SMC911X select CRC32 select MII depends on (ARM || SUPERH) - ---help--- + help This is a driver for SMSC's LAN911x series of Ethernet chipsets including the new LAN9115, LAN9116, LAN9117, and LAN9118. Say Y here if you want it compiled into the kernel. @@ -94,7 +94,7 @@ config SMSC911X select CRC32 select MII select PHYLIB - ---help--- + help Say Y here if you want support for SMSC LAN911x and LAN921x families of ethernet controllers. @@ -104,7 +104,7 @@ config SMSC911X config SMSC911X_ARCH_HOOKS def_bool n depends on SMSC911X - ---help--- + help If the arch enables this, it allows the arch to implement various hooks for more comprehensive interrupt control and also to override the source of the MAC address. @@ -115,7 +115,7 @@ config SMSC9420 select CRC32 select PHYLIB select SMSC_PHY - ---help--- + help This is a driver for SMSC's LAN9420 PCI ethernet adapter. Say Y here if you want it compiled into the kernel. diff --git a/drivers/net/ethernet/socionext/Kconfig b/drivers/net/ethernet/socionext/Kconfig index 95e99baf3f45..48298389851d 100644 --- a/drivers/net/ethernet/socionext/Kconfig +++ b/drivers/net/ethernet/socionext/Kconfig @@ -2,7 +2,7 @@ config NET_VENDOR_SOCIONEXT bool "Socionext ethernet drivers" default y - ---help--- + help Option to select ethernet drivers for Socionext platforms. Note that the answer to this question doesn't directly affect the @@ -18,7 +18,7 @@ config SNI_AVE depends on HAS_IOMEM select MFD_SYSCON select PHYLIB - ---help--- + help Driver for gigabit ethernet MACs, called AVE, in the Socionext UniPhier family. @@ -28,7 +28,7 @@ config SNI_NETSEC select PHYLIB select PAGE_POOL select MII - ---help--- + help Enable to add support for the SocioNext NetSec Gigabit Ethernet controller + PHY, as found on the Synquacer SC2A11 SoC diff --git a/drivers/net/ethernet/stmicro/Kconfig b/drivers/net/ethernet/stmicro/Kconfig index 39ef86360417..cc136b4c9afd 100644 --- a/drivers/net/ethernet/stmicro/Kconfig +++ b/drivers/net/ethernet/stmicro/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_STMICRO bool "STMicroelectronics devices" default y depends on HAS_IOMEM - ---help--- + help If you have a network (Ethernet) card based on Synopsys Ethernet IP Cores, say Y. diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index 36bd2e18f23b..9a47c5aec91a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -9,7 +9,7 @@ config STMMAC_ETH select CRC32 imply PTP_1588_CLOCK select RESET_CONTROLLER - ---help--- + help This is the driver for the Ethernet IPs built around a Synopsys IP Core. @@ -20,7 +20,7 @@ config STMMAC_SELFTESTS depends on INET depends on STMMAC_ETH default n - ---help--- + help This adds support for STMMAC Selftests using ethtool. Enable this feature if you are facing problems with your HW and submit the test results to the netdev Mailing List. @@ -30,7 +30,7 @@ config STMMAC_PLATFORM depends on STMMAC_ETH select MFD_SYSCON default y - ---help--- + help This selects the platform specific bus support for the stmmac driver. This is the driver used on several SoCs: STi, Allwinner, Amlogic Meson, Altera SOCFPGA. @@ -52,7 +52,7 @@ config DWMAC_DWC_QOS_ETH config DWMAC_GENERIC tristate "Generic driver for DWMAC" default STMMAC_PLATFORM - ---help--- + help Generic DWMAC driver for platforms that don't require any platform specific code to function or is using platform data for setup. @@ -84,7 +84,7 @@ config DWMAC_LPC18XX default ARCH_LPC18XX depends on OF && (ARCH_LPC18XX || COMPILE_TEST) select MFD_SYSCON - ---help--- + help Support for NXP LPC18xx/43xx DWMAC Ethernet. config DWMAC_MEDIATEK @@ -155,7 +155,7 @@ config DWMAC_STI default ARCH_STI depends on OF && (ARCH_STI || COMPILE_TEST) select MFD_SYSCON - ---help--- + help Support for ethernet controller on STi SOCs. This selects STi SoC glue layer support for the stmmac @@ -167,7 +167,7 @@ config DWMAC_STM32 default ARCH_STM32 depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST) select MFD_SYSCON - ---help--- + help Support for ethernet controller on STM32 SOCs. This selects STM32 SoC glue layer support for the stmmac @@ -178,7 +178,7 @@ config DWMAC_SUNXI tristate "Allwinner GMAC support" default ARCH_SUNXI depends on OF && (ARCH_SUNXI || COMPILE_TEST) - ---help--- + help Support for Allwinner A20/A31 GMAC ethernet controllers. This selects Allwinner SoC glue layer support for the @@ -190,7 +190,7 @@ config DWMAC_SUN8I default ARCH_SUNXI depends on OF && (ARCH_SUNXI || COMPILE_TEST) select MDIO_BUS_MUX - ---help--- + help Support for Allwinner H3 A83T A64 EMAC ethernet controllers. This selects Allwinner SoC glue layer support for the @@ -202,7 +202,7 @@ config DWMAC_IMX8 default ARCH_MXC depends on OF && (ARCH_MXC || COMPILE_TEST) select MFD_SYSCON - ---help--- + help Support for ethernet controller on NXP i.MX8 SOCs. This selects NXP SoC glue layer support for the stmmac @@ -216,7 +216,7 @@ config DWMAC_INTEL default X86 depends on X86 && STMMAC_ETH && PCI depends on COMMON_CLK - ---help--- + help This selects the Intel platform specific bus support for the stmmac driver. This driver is used for Intel Quark/EHL/TGL. @@ -224,7 +224,7 @@ config STMMAC_PCI tristate "STMMAC PCI bus support" depends on STMMAC_ETH && PCI depends on COMMON_CLK - ---help--- + help This selects the platform specific bus support for the stmmac driver. This driver was tested on XLINX XC2V3000 FF1152AMT0221 D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit. diff --git a/drivers/net/ethernet/sun/Kconfig b/drivers/net/ethernet/sun/Kconfig index 7b982e02ea3a..309de38a7530 100644 --- a/drivers/net/ethernet/sun/Kconfig +++ b/drivers/net/ethernet/sun/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_SUN bool "Sun devices" default y depends on SUN3 || SBUS || PCI || SUN_LDOMS - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -21,7 +21,7 @@ config HAPPYMEAL tristate "Sun Happy Meal 10/100baseT support" depends on (SBUS || PCI) select CRC32 - ---help--- + help This driver supports the "hme" interface present on most Ultra systems and as an option on older Sbus systems. This driver supports both PCI and Sbus devices. This driver also supports the "qfe" quad @@ -34,7 +34,7 @@ config SUNBMAC tristate "Sun BigMAC 10/100baseT support" depends on SBUS select CRC32 - ---help--- + help This driver supports the "be" interface available as an Sbus option. This is Sun's older 100baseT Ethernet device. @@ -45,7 +45,7 @@ config SUNQE tristate "Sun QuadEthernet support" depends on SBUS select CRC32 - ---help--- + help This driver supports the "qe" 10baseT Ethernet device, available as an Sbus option. Note that this is not the same as Quad FastEthernet "qfe" which is supported by the Happy Meal driver instead. @@ -58,7 +58,7 @@ config SUNGEM depends on PCI select CRC32 select SUNGEM_PHY - ---help--- + help Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also <http://docs.oracle.com/cd/E19455-01/806-3985-10/806-3985-10.pdf>. @@ -66,7 +66,7 @@ config CASSINI tristate "Sun Cassini support" depends on PCI select CRC32 - ---help--- + help Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also <http://docs.oracle.com/cd/E19113-01/giga.ether.pci/817-4341-10/817-4341-10.pdf>. @@ -80,7 +80,7 @@ config SUNVNET default m depends on SUN_LDOMS depends on SUNVNET_COMMON - ---help--- + help Support for virtual network devices under Sun Logical Domains. config LDMVSW @@ -88,7 +88,7 @@ config LDMVSW default m depends on SUN_LDOMS depends on SUNVNET_COMMON - ---help--- + help Support for virtual switch devices under Sun4v Logical Domains. This driver adds a network interface for every vsw-port node found in the machine description of a service domain. @@ -100,7 +100,7 @@ config NIU tristate "Sun Neptune 10Gbit Ethernet support" depends on PCI select CRC32 - ---help--- + help This enables support for cards based upon Sun's Neptune chipset. diff --git a/drivers/net/ethernet/synopsys/Kconfig b/drivers/net/ethernet/synopsys/Kconfig index 9e199772c1d7..f2a4287c48b8 100644 --- a/drivers/net/ethernet/synopsys/Kconfig +++ b/drivers/net/ethernet/synopsys/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_SYNOPSYS bool "Synopsys devices" default y - ---help--- + help If you have a network (Ethernet) device belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -21,7 +21,7 @@ config DWC_XLGMAC depends on HAS_IOMEM && HAS_DMA select BITREVERSE select CRC32 - ---help--- + help This driver supports the Synopsys DesignWare Cores Enterprise Ethernet (dwc-xlgmac). @@ -30,7 +30,7 @@ if DWC_XLGMAC config DWC_XLGMAC_PCI tristate "XLGMAC PCI bus support" depends on DWC_XLGMAC && PCI - ---help--- + help This selects the pci bus support for the dwc-xlgmac driver. This driver was tested on Synopsys XLGMAC IP Prototyping Kit. diff --git a/drivers/net/ethernet/tehuti/Kconfig b/drivers/net/ethernet/tehuti/Kconfig index 8ad1526f4bdd..8735633765a1 100644 --- a/drivers/net/ethernet/tehuti/Kconfig +++ b/drivers/net/ethernet/tehuti/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_TEHUTI bool "Tehuti devices" default y depends on PCI - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,7 +20,7 @@ if NET_VENDOR_TEHUTI config TEHUTI tristate "Tehuti Networks 10G Ethernet" depends on PCI - ---help--- + help Tehuti Networks 10G Ethernet NIC endif # NET_VENDOR_TEHUTI diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig index 182d10f171f6..50f55364d4fb 100644 --- a/drivers/net/ethernet/ti/Kconfig +++ b/drivers/net/ethernet/ti/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_TI bool "Texas Instruments (TI) devices" default y depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -23,7 +23,7 @@ config TI_DAVINCI_EMAC select TI_DAVINCI_MDIO select PHYLIB select GENERIC_ALLOCATOR - ---help--- + help This driver supports TI's DaVinci Ethernet . To compile this driver as a module, choose M here: the module @@ -33,7 +33,7 @@ config TI_DAVINCI_MDIO tristate "TI DaVinci MDIO Support" depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST select PHYLIB - ---help--- + help This driver supports TI's DaVinci MDIO module. To compile this driver as a module, choose M here: the module @@ -42,7 +42,7 @@ config TI_DAVINCI_MDIO config TI_CPSW_PHY_SEL bool "TI CPSW Phy mode Selection (DEPRECATED)" default n - ---help--- + help This driver supports configuring of the phy mode connected to the CPSW. DEPRECATED: use PHY_TI_GMII_SEL. @@ -55,7 +55,7 @@ config TI_CPSW select PAGE_POOL select REGMAP imply PHY_TI_GMII_SEL - ---help--- + help This driver supports TI's CPSW Ethernet Switch. To compile this driver as a module, choose M here: the module @@ -83,7 +83,7 @@ config TI_CPTS depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST depends on COMMON_CLK depends on PTP_1588_CLOCK - ---help--- + help This driver supports the Common Platform Time Sync unit of the CPSW Ethernet Switch and Keystone 2 1g/10g Switch Subsystem. The unit can time stamp PTP UDP/IPv4 and Layer 2 packets, and the @@ -133,7 +133,7 @@ config TI_KEYSTONE_NETCP depends on OF depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS depends on TI_CPTS || !TI_CPTS - ---help--- + help This driver supports TI's Keystone NETCP Core. To compile this driver as a module, choose M here: the module @@ -142,7 +142,7 @@ config TI_KEYSTONE_NETCP config TI_KEYSTONE_NETCP_ETHSS depends on TI_KEYSTONE_NETCP tristate "TI Keystone NETCP Ethernet subsystem Support" - ---help--- + help To compile this driver as a module, choose M here: the module will be called keystone_netcp_ethss. @@ -150,7 +150,7 @@ config TI_KEYSTONE_NETCP_ETHSS config TLAN tristate "TI ThunderLAN support" depends on (PCI || EISA) - ---help--- + help If you have a PCI Ethernet network card based on the ThunderLAN chip which is supported by this driver, say Y here. @@ -168,7 +168,7 @@ config CPMAC tristate "TI AR7 CPMAC Ethernet support" depends on AR7 select PHYLIB - ---help--- + help TI AR7 CPMAC Ethernet support endif # NET_VENDOR_TI diff --git a/drivers/net/ethernet/toshiba/Kconfig b/drivers/net/ethernet/toshiba/Kconfig index 9ccdf032404e..701e9b7c1c3b 100644 --- a/drivers/net/ethernet/toshiba/Kconfig +++ b/drivers/net/ethernet/toshiba/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_TOSHIBA bool "Toshiba devices" default y depends on PCI && (PPC_IBM_CELL_BLADE || MIPS) || PPC_PS3 - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -21,7 +21,7 @@ config GELIC_NET tristate "PS3 Gigabit Ethernet driver" depends on PPC_PS3 select PS3_SYS_MANAGER - ---help--- + help This driver supports the network device on the PS3 game console. This driver has built-in support for Ethernet. @@ -32,7 +32,7 @@ config GELIC_WIRELESS bool "PS3 Wireless support" depends on GELIC_NET && WLAN select WIRELESS_EXT - ---help--- + help This option adds the support for the wireless feature of PS3. If you have the wireless-less model of PS3 or have no plan to use wireless feature, disabling this option saves memory. As @@ -44,7 +44,7 @@ config SPIDER_NET depends on PCI && PPC_IBM_CELL_BLADE select FW_LOADER select SUNGEM_PHY - ---help--- + help This driver supports the Gigabit Ethernet chips present on the Cell Processor-Based Blades from IBM. diff --git a/drivers/net/ethernet/tundra/Kconfig b/drivers/net/ethernet/tundra/Kconfig index 5c909df0c3b9..edd52b2bd135 100644 --- a/drivers/net/ethernet/tundra/Kconfig +++ b/drivers/net/ethernet/tundra/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_TUNDRA bool "Tundra devices" default y depends on TSI108_BRIDGE - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,7 +20,7 @@ if NET_VENDOR_TUNDRA config TSI108_ETH tristate "Tundra TSI108 gigabit Ethernet support" depends on TSI108_BRIDGE - ---help--- + help This driver supports Tundra TSI108 gigabit Ethernet ports. To compile this driver as a module, choose M here: the module will be called tsi108_eth. diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig index 6cff5f7d57c4..da287ef65be7 100644 --- a/drivers/net/ethernet/via/Kconfig +++ b/drivers/net/ethernet/via/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_VIA bool "VIA devices" default y - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -23,7 +23,7 @@ config VIA_RHINE depends on HAS_DMA select CRC32 select MII - ---help--- + help If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A), Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type Ethernet functions can also be found integrated on South Bridges @@ -35,7 +35,7 @@ config VIA_RHINE config VIA_RHINE_MMIO bool "Use MMIO instead of PIO" depends on VIA_RHINE - ---help--- + help This instructs the driver to use PCI shared memory (MMIO) instead of programmed I/O ports (PIO). Enabling this gives an improvement in processing time in parts of the driver. @@ -49,7 +49,7 @@ config VIA_VELOCITY select CRC32 select CRC_CCITT select MII - ---help--- + help If you have a VIA "Velocity" based network card say Y here. To compile this driver as a module, choose M here. The module diff --git a/drivers/net/ethernet/wiznet/Kconfig b/drivers/net/ethernet/wiznet/Kconfig index 0422775e1659..4bac2ad2d6a1 100644 --- a/drivers/net/ethernet/wiznet/Kconfig +++ b/drivers/net/ethernet/wiznet/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_WIZNET bool "WIZnet devices" depends on HAS_IOMEM default y - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,7 +20,7 @@ if NET_VENDOR_WIZNET config WIZNET_W5100 tristate "WIZnet W5100 Ethernet support" depends on HAS_IOMEM - ---help--- + help Support for WIZnet W5100 chips. W5100 is a single chip with integrated 10/100 Ethernet MAC, @@ -33,7 +33,7 @@ config WIZNET_W5100 config WIZNET_W5300 tristate "WIZnet W5300 Ethernet support" depends on HAS_IOMEM - ---help--- + help Support for WIZnet W5300 chips. W5300 is a single chip with integrated 10/100 Ethernet MAC, @@ -50,20 +50,20 @@ choice config WIZNET_BUS_DIRECT bool "Direct address bus mode" - ---help--- + help In direct address mode host system can directly access all registers after mapping to Memory-Mapped I/O space. config WIZNET_BUS_INDIRECT bool "Indirect address bus mode" - ---help--- + help In indirect address mode host system indirectly accesses registers using Indirect Mode Address Register and Indirect Mode Data Register, which are directly mapped to Memory-Mapped I/O space. config WIZNET_BUS_ANY bool "Select interface mode in runtime" - ---help--- + help If interface mode is unknown in compile time, it can be selected in runtime from board/platform resources configuration. @@ -74,7 +74,7 @@ config WIZNET_W5100_SPI tristate "WIZnet W5100/W5200/W5500 Ethernet support for SPI mode" depends on WIZNET_BUS_ANY && WIZNET_W5100 depends on SPI - ---help--- + help In SPI mode host system accesses registers using SPI protocol (mode 0) on the SPI bus. diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig index 0810af8193cb..d0d0d4fe9d40 100644 --- a/drivers/net/ethernet/xilinx/Kconfig +++ b/drivers/net/ethernet/xilinx/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_XILINX bool "Xilinx devices" default y - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,20 +20,20 @@ config XILINX_EMACLITE tristate "Xilinx 10/100 Ethernet Lite support" depends on PPC32 || MICROBLAZE || ARCH_ZYNQ || MIPS select PHYLIB - ---help--- + help This driver supports the 10/100 Ethernet Lite from Xilinx. config XILINX_AXI_EMAC tristate "Xilinx 10/100/1000 AXI Ethernet support" select PHYLINK - ---help--- + help This driver supports the 10/100/1000 Ethernet from Xilinx for the AXI bus interface used in Xilinx Virtex FPGAs and Soc's. config XILINX_LL_TEMAC tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver" select PHYLIB - ---help--- + help This driver supports the Xilinx 10/100/1000 LocalLink TEMAC core used in Xilinx Spartan and Virtex FPGAs diff --git a/drivers/net/ethernet/xircom/Kconfig b/drivers/net/ethernet/xircom/Kconfig index ad5390079b13..7497b9bea511 100644 --- a/drivers/net/ethernet/xircom/Kconfig +++ b/drivers/net/ethernet/xircom/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_XIRCOM bool "Xircom devices" default y depends on PCMCIA - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,7 +20,7 @@ if NET_VENDOR_XIRCOM config PCMCIA_XIRC2PS tristate "Xircom 16-bit PCMCIA support" depends on PCMCIA - ---help--- + help Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card) Ethernet or Fast Ethernet card to your computer. diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig index 98aa7b8ddb06..7b83a6e5d894 100644 --- a/drivers/net/ethernet/xscale/Kconfig +++ b/drivers/net/ethernet/xscale/Kconfig @@ -8,7 +8,7 @@ config NET_VENDOR_XSCALE default y depends on NET_VENDOR_INTEL && (ARM && ARCH_IXP4XX && \ IXP4XX_NPE && IXP4XX_QMGR) - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question does not directly affect the @@ -23,7 +23,7 @@ config IXP4XX_ETH depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR select PHYLIB select NET_PTP_CLASSIFY - ---help--- + help Say Y here if you want to use built-in Ethernet ports on IXP4xx processor. diff --git a/drivers/net/fddi/Kconfig b/drivers/net/fddi/Kconfig index da4f58eed08f..60cc7524520c 100644 --- a/drivers/net/fddi/Kconfig +++ b/drivers/net/fddi/Kconfig @@ -6,7 +6,7 @@ config FDDI tristate "FDDI driver support" depends on PCI || EISA || TC - ---help--- + help Fiber Distributed Data Interface is a high speed local area network design; essentially a replacement for high speed Ethernet. FDDI can run over copper or fiber. If you are connected to such a network and @@ -30,7 +30,7 @@ config DEFZA config DEFXX tristate "Digital DEFTA/DEFEA/DEFPA adapter support" depends on FDDI && (PCI || EISA || TC) - ---help--- + help This is support for the DIGITAL series of TURBOchannel (DEFTA), EISA (DEFEA) and PCI (DEFPA) controllers which can connect you to a local FDDI network. @@ -44,7 +44,7 @@ config DEFXX_MMIO depends on DEFXX default n if PCI || EISA default y - ---help--- + help This instructs the driver to use EISA or PCI memory-mapped I/O (MMIO) as appropriate instead of programmed I/O ports (PIO). Enabling this gives an improvement in processing time in parts @@ -58,7 +58,7 @@ config SKFP tristate "SysKonnect FDDI PCI support" depends on FDDI && PCI select BITREVERSE - ---help--- + help Say Y here if you have a SysKonnect FDDI PCI adapter. The following adapters are supported by this driver: - SK-5521 (SK-NET FDDI-UP) diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig index f4500f04147d..70f754abbeca 100644 --- a/drivers/net/hamradio/Kconfig +++ b/drivers/net/hamradio/Kconfig @@ -3,7 +3,7 @@ config MKISS tristate "Serial port KISS driver" depends on AX25 && TTY select CRC16 - ---help--- + help KISS is a protocol used for the exchange of data between a computer and a Terminal Node Controller (a small embedded system commonly used for networking over AX.25 amateur radio connections; it @@ -20,7 +20,7 @@ config MKISS config 6PACK tristate "Serial port 6PACK driver" depends on AX25 && TTY - ---help--- + help 6pack is a transmission protocol for the data exchange between your PC and your TNC (the Terminal Node Controller acts as a kind of modem connecting your computer's serial port to your radio's @@ -48,7 +48,7 @@ config BPQETHER config DMASCC tristate "High-speed (DMA) SCC driver for AX.25" depends on ISA && AX25 && BROKEN_ON_SMP && ISA_DMA_API - ---help--- + help This is a driver for high-speed SCC boards, i.e. those supporting DMA on one port. You usually use those boards to connect your computer to an amateur radio modem (such as the WA4DSY 56kbps @@ -81,7 +81,7 @@ config DMASCC config SCC tristate "Z8530 SCC driver" depends on ISA && AX25 && ISA_DMA_API - ---help--- + help These cards are used to connect your Linux box to an amateur radio in order to communicate with other computers. If you want to use this, read <file:Documentation/networking/z8530drv.rst> and the @@ -116,7 +116,7 @@ config BAYCOM_SER_FDX tristate "BAYCOM ser12 fullduplex driver for AX.25" depends on AX25 && !S390 select CRC_CCITT - ---help--- + help This is one of two drivers for Baycom style simple amateur radio modems that connect to a serial interface. The driver supports the ser12 design in full-duplex mode. In addition, it allows the @@ -136,7 +136,7 @@ config BAYCOM_SER_HDX tristate "BAYCOM ser12 halfduplex driver for AX.25" depends on AX25 && !S390 select CRC_CCITT - ---help--- + help This is one of two drivers for Baycom style simple amateur radio modems that connect to a serial interface. The driver supports the ser12 design in half-duplex mode. This is the old driver. It is @@ -154,7 +154,7 @@ config BAYCOM_PAR tristate "BAYCOM picpar and par96 driver for AX.25" depends on PARPORT && AX25 select CRC_CCITT - ---help--- + help This is a driver for Baycom style simple amateur radio modems that connect to a parallel interface. The driver supports the picpar and par96 designs. To configure the driver, use the sethdlc utility @@ -169,7 +169,7 @@ config BAYCOM_EPP tristate "BAYCOM epp driver for AX.25" depends on PARPORT && AX25 && !64BIT select CRC_CCITT - ---help--- + help This is a driver for Baycom style simple amateur radio modems that connect to a parallel interface. The driver supports the EPP designs. To configure the driver, use the sethdlc utility available diff --git a/drivers/net/hippi/Kconfig b/drivers/net/hippi/Kconfig index de78504a5798..46b911bb8493 100644 --- a/drivers/net/hippi/Kconfig +++ b/drivers/net/hippi/Kconfig @@ -6,7 +6,7 @@ config HIPPI bool "HIPPI driver support" depends on INET && PCI - ---help--- + help HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI can run over copper (25m) or fiber (300m on multi-mode or 10km on @@ -21,7 +21,7 @@ if HIPPI config ROADRUNNER tristate "Essential RoadRunner HIPPI PCI adapter support" depends on PCI - ---help--- + help Say Y here if this is your PCI HIPPI network card. To compile this driver as a module, choose M here: the module @@ -30,7 +30,7 @@ config ROADRUNNER config ROADRUNNER_LARGE_RINGS bool "Use large TX/RX rings" depends on ROADRUNNER - ---help--- + help If you say Y here, the RoadRunner driver will preallocate up to 2 MB of additional memory to allow for fastest operation, both for transmitting and receiving. This memory cannot be used by any other diff --git a/drivers/net/ieee802154/Kconfig b/drivers/net/ieee802154/Kconfig index c92a62dbf398..0f7c6dc2ed15 100644 --- a/drivers/net/ieee802154/Kconfig +++ b/drivers/net/ieee802154/Kconfig @@ -3,7 +3,7 @@ menuconfig IEEE802154_DRIVERS tristate "IEEE 802.15.4 drivers" depends on NETDEVICES && IEEE802154 default y - ---help--- + help Say Y here to get to see options for IEEE 802.15.4 Low-Rate Wireless Personal Area Network device drivers. This option alone does not add any kernel code. @@ -14,7 +14,7 @@ menuconfig IEEE802154_DRIVERS config IEEE802154_FAKELB depends on IEEE802154_DRIVERS && MAC802154 tristate "IEEE 802.15.4 loopback driver" - ---help--- + help Say Y here to enable the fake driver that can emulate a net of several interconnected radio devices. @@ -26,7 +26,7 @@ config IEEE802154_AT86RF230 tristate "AT86RF230/231/233/212 transceiver driver" depends on SPI select REGMAP_SPI - ---help--- + help Say Y here to enable the at86rf230/231/233/212 SPI 802.15.4 wireless controller. @@ -37,7 +37,7 @@ config IEEE802154_AT86RF230_DEBUGFS depends on IEEE802154_AT86RF230 bool "AT86RF230 debugfs interface" depends on DEBUG_FS - ---help--- + help This option compiles debugfs code for the at86rf230 driver. config IEEE802154_MRF24J40 @@ -45,7 +45,7 @@ config IEEE802154_MRF24J40 depends on IEEE802154_DRIVERS && MAC802154 depends on SPI select REGMAP_SPI - ---help--- + help Say Y here to enable the MRF24J20 SPI 802.15.4 wireless controller. @@ -56,7 +56,7 @@ config IEEE802154_CC2520 depends on IEEE802154_DRIVERS && MAC802154 tristate "CC2520 transceiver driver" depends on SPI - ---help--- + help Say Y here to enable the CC2520 SPI 802.15.4 wireless controller. @@ -66,7 +66,7 @@ config IEEE802154_CC2520 config IEEE802154_ATUSB tristate "ATUSB transceiver driver" depends on IEEE802154_DRIVERS && MAC802154 && USB - ---help--- + help Say Y here to enable the ATUSB IEEE 802.15.4 wireless controller. @@ -77,7 +77,7 @@ config IEEE802154_ADF7242 tristate "ADF7242 transceiver driver" depends on IEEE802154_DRIVERS && MAC802154 depends on SPI - ---help--- + help Say Y here to enable the ADF7242 SPI 802.15.4 wireless controller. @@ -89,7 +89,7 @@ config IEEE802154_CA8210 depends on IEEE802154_DRIVERS && MAC802154 depends on COMMON_CLK depends on SPI - ---help--- + help Say Y here to enable the CA8210 SPI 802.15.4 wireless controller. @@ -100,7 +100,7 @@ config IEEE802154_CA8210_DEBUGFS bool "CA8210 debugfs interface" depends on IEEE802154_CA8210 depends on DEBUG_FS - ---help--- + help This option compiles debugfs code for the ca8210 driver. This exposes a debugfs node for each CA8210 instance which allows direct use of the Cascoda API, exposing the 802.15.4 MAC @@ -110,7 +110,7 @@ config IEEE802154_MCR20A tristate "MCR20A transceiver driver" depends on IEEE802154_DRIVERS && MAC802154 depends on SPI - ---help--- + help Say Y here to enable the MCR20A SPI 802.15.4 wireless controller. @@ -120,7 +120,7 @@ config IEEE802154_MCR20A config IEEE802154_HWSIM depends on IEEE802154_DRIVERS && MAC802154 tristate "Simulated radio testing tool for mac802154" - ---help--- + help This driver is a developer testing tool that can be used to test IEEE 802.15.4 networking stack (mac802154) functionality. This is not needed for normal wpan usage and is only for testing. diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 047c27087b10..f25702386d83 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -134,7 +134,7 @@ config MDIO_GPIO tristate "GPIO lib-based bitbanged MDIO buses" depends on MDIO_BITBANG depends on GPIOLIB || COMPILE_TEST - ---help--- + help Supports GPIO lib-based MDIO busses. To compile this driver as a module, choose M here: the module @@ -265,7 +265,7 @@ config SWPHY config LED_TRIGGER_PHY bool "Support LED triggers for tracking link state" depends on LEDS_TRIGGERS - ---help--- + help Adds support for a set of LED trigger events per-PHY. Link state change will trigger the events, for consumption by an LED class driver. There are triggers for each link speed currently @@ -298,12 +298,12 @@ config ADIN_PHY config AMD_PHY tristate "AMD PHYs" - ---help--- + help Currently supports the am79c874 config AQUANTIA_PHY tristate "Aquantia PHYs" - ---help--- + help Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405 config AX88796B_PHY @@ -316,13 +316,13 @@ config BCM63XX_PHY tristate "Broadcom 63xx SOCs internal PHY" depends on BCM63XX || COMPILE_TEST select BCM_NET_PHYLIB - ---help--- + help Currently supports the 6348 and 6358 PHYs. config BCM7XXX_PHY tristate "Broadcom 7xxx SOCs internal PHYs" select BCM_NET_PHYLIB - ---help--- + help Currently supports the BCM7366, BCM7439, BCM7445, and 40nm and 65nm generation of BCM7xxx Set Top Box SoCs. @@ -336,7 +336,7 @@ config BCM_CYGNUS_PHY depends on ARCH_BCM_IPROC || COMPILE_TEST depends on MDIO_BCM_IPROC select BCM_NET_PHYLIB - ---help--- + help This PHY driver is for the 1G internal PHYs of the Broadcom Cygnus and Omega Family SoC. @@ -350,7 +350,7 @@ config BCM_NET_PHYLIB config BROADCOM_PHY tristate "Broadcom PHYs" select BCM_NET_PHYLIB - ---help--- + help Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, BCM5481, BCM54810 and BCM5482 PHYs. @@ -368,48 +368,48 @@ config BCM54140_PHY config BCM84881_PHY tristate "Broadcom BCM84881 PHY" depends on PHYLIB - ---help--- + help Support the Broadcom BCM84881 PHY. config CICADA_PHY tristate "Cicada PHYs" - ---help--- + help Currently supports the cis8204 config CORTINA_PHY tristate "Cortina EDC CDR 10G Ethernet PHY" - ---help--- + help Currently supports the CS4340 phy. config DAVICOM_PHY tristate "Davicom PHYs" - ---help--- + help Currently supports dm9161e and dm9131 config DP83822_PHY tristate "Texas Instruments DP83822/825/826 PHYs" - ---help--- + help Supports the DP83822, DP83825I, DP83825CM, DP83825CS, DP83825S, DP83826C and DP83826NC PHYs. config DP83TC811_PHY tristate "Texas Instruments DP83TC811 PHY" - ---help--- + help Supports the DP83TC811 PHY. config DP83848_PHY tristate "Texas Instruments DP83848 PHY" - ---help--- + help Supports the DP83848 PHY. config DP83867_PHY tristate "Texas Instruments DP83867 Gigabit PHY" - ---help--- + help Currently supports the DP83867 PHY. config DP83869_PHY tristate "Texas Instruments DP83869 Gigabit PHY" - ---help--- + help Currently supports the DP83869 PHY. This PHY supports copper and fiber connections. @@ -417,7 +417,7 @@ config FIXED_PHY tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs" depends on PHYLIB select SWPHY - ---help--- + help Adds the platform "fixed" MDIO Bus to cover the boards that use PHYs that are not connected to the real MDIO bus. @@ -425,12 +425,12 @@ config FIXED_PHY config ICPLUS_PHY tristate "ICPlus PHYs" - ---help--- + help Currently supports the IP175C and IP1001 PHYs. config INTEL_XWAY_PHY tristate "Intel XWAY PHYs" - ---help--- + help Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs. These PHYs are marked as standalone chips under the names PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel @@ -438,33 +438,33 @@ config INTEL_XWAY_PHY config LSI_ET1011C_PHY tristate "LSI ET1011C PHY" - ---help--- + help Supports the LSI ET1011C PHY. config LXT_PHY tristate "Intel LXT PHYs" - ---help--- + help Currently supports the lxt970, lxt971 config MARVELL_PHY tristate "Marvell PHYs" - ---help--- + help Currently has a driver for the 88E1011S config MARVELL_10G_PHY tristate "Marvell Alaska 10Gbit PHYs" - ---help--- + help Support for the Marvell Alaska MV88X3310 and compatible PHYs. config MESON_GXL_PHY tristate "Amlogic Meson GXL Internal PHY" depends on ARCH_MESON || COMPILE_TEST - ---help--- + help Currently has a driver for the Amlogic Meson GXL Internal PHY config MICREL_PHY tristate "Micrel PHYs" - ---help--- + help Supports the KSZ9021, VSC8201, KS8001 PHYs. config MICROCHIP_PHY @@ -474,7 +474,7 @@ config MICROCHIP_PHY config MICROCHIP_T1_PHY tristate "Microchip T1 PHYs" - ---help--- + help Supports the LAN87XX PHYs. config MICROSEMI_PHY @@ -482,18 +482,18 @@ config MICROSEMI_PHY depends on MACSEC || MACSEC=n select CRYPTO_AES select CRYPTO_ECB - ---help--- + help Currently supports VSC8514, VSC8530, VSC8531, VSC8540 and VSC8541 PHYs config NATIONAL_PHY tristate "National Semiconductor PHYs" - ---help--- + help Currently supports the DP83865 PHY. config NXP_TJA11XX_PHY tristate "NXP TJA11xx PHYs support" depends on HWMON - ---help--- + help Currently supports the NXP TJA1100 and TJA1101 PHY. config AT803X_PHY @@ -504,47 +504,47 @@ config AT803X_PHY config QSEMI_PHY tristate "Quality Semiconductor PHYs" - ---help--- + help Currently supports the qs6612 config REALTEK_PHY tristate "Realtek PHYs" - ---help--- + help Supports the Realtek 821x PHY. config RENESAS_PHY tristate "Driver for Renesas PHYs" - ---help--- + help Supports the Renesas PHYs uPD60620 and uPD60620A. config ROCKCHIP_PHY tristate "Driver for Rockchip Ethernet PHYs" - ---help--- + help Currently supports the integrated Ethernet PHY. config SMSC_PHY tristate "SMSC PHYs" - ---help--- + help Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs config STE10XP tristate "STMicroelectronics STe10Xp PHYs" - ---help--- + help This is the driver for the STe100p and STe101p PHYs. config TERANETICS_PHY tristate "Teranetics PHYs" - ---help--- + help Currently supports the Teranetics TN2020 config VITESSE_PHY tristate "Vitesse PHYs" - ---help--- + help Currently supports the vsc8244 config XILINX_GMII2RGMII tristate "Xilinx GMII2RGMII converter driver" - ---help--- + help This driver support xilinx GMII to RGMII IP core it provides the Reduced Gigabit Media Independent Interface(RGMII) between Ethernet physical media devices and the Gigabit Ethernet controller. diff --git a/drivers/net/plip/Kconfig b/drivers/net/plip/Kconfig index e03556d1d0c2..67bfb01de6f7 100644 --- a/drivers/net/plip/Kconfig +++ b/drivers/net/plip/Kconfig @@ -6,7 +6,7 @@ config PLIP tristate "PLIP (parallel port) support" depends on PARPORT - ---help--- + help PLIP (Parallel Line Internet Protocol) is used to create a reasonably fast mini network consisting of two (or, rarely, more) local machines. A PLIP link from a Linux box is a popular means to diff --git a/drivers/net/ppp/Kconfig b/drivers/net/ppp/Kconfig index 1a2e2f7629f3..ac4d162d9455 100644 --- a/drivers/net/ppp/Kconfig +++ b/drivers/net/ppp/Kconfig @@ -6,7 +6,7 @@ config PPP tristate "PPP (point-to-point protocol) support" select SLHC - ---help--- + help PPP (Point to Point Protocol) is a newer and better SLIP. It serves the same purpose: sending Internet traffic over telephone (and other serial) lines. Ask your access provider if they support it, because @@ -38,7 +38,7 @@ if PPP config PPP_BSDCOMP tristate "PPP BSD-Compress compression" depends on PPP - ---help--- + help Support for the BSD-Compress compression method for PPP, which uses the LZW compression method to compress each PPP packet before it is sent over the wire. The machine at the other end of the PPP link @@ -59,7 +59,7 @@ config PPP_DEFLATE depends on PPP select ZLIB_INFLATE select ZLIB_DEFLATE - ---help--- + help Support for the Deflate compression method for PPP, which uses the Deflate algorithm (the same algorithm that gzip uses) to compress each PPP packet before it is sent over the wire. The machine at the @@ -72,7 +72,7 @@ config PPP_DEFLATE config PPP_FILTER bool "PPP filtering" depends on PPP - ---help--- + help Say Y here if you want to be able to filter the packets passing over PPP interfaces. This allows you to control which packets count as activity (i.e. which packets will reset the idle timer or bring up @@ -88,7 +88,7 @@ config PPP_MPPE select CRYPTO select CRYPTO_SHA1 select CRYPTO_LIB_ARC4 - ---help--- + help Support for the MPPE Encryption protocol, as employed by the Microsoft Point-to-Point Tunneling Protocol. @@ -98,7 +98,7 @@ config PPP_MPPE config PPP_MULTILINK bool "PPP multilink support" depends on PPP - ---help--- + help PPP multilink is a protocol (defined in RFC 1990) which allows you to combine several (logical or physical) lines into one logical PPP connection, so that you can utilize your full bandwidth. @@ -111,7 +111,7 @@ config PPP_MULTILINK config PPPOATM tristate "PPP over ATM" depends on ATM && PPP - ---help--- + help Support PPP (Point to Point Protocol) encapsulated in ATM frames. This implementation does not yet comply with section 8 of RFC2364, which can lead to bad results if the ATM peer loses state and @@ -120,7 +120,7 @@ config PPPOATM config PPPOE tristate "PPP over Ethernet" depends on PPP - ---help--- + help Support for PPP over Ethernet. This driver requires the latest version of pppd from the CVS @@ -132,7 +132,7 @@ config PPPOE config PPTP tristate "PPP over IPv4 (PPTP)" depends on PPP && NET_IPGRE_DEMUX - ---help--- + help Support for PPP over IPv4.(Point-to-Point Tunneling Protocol) This driver requires pppd plugin to work in client mode or @@ -143,7 +143,7 @@ config PPTP config PPPOL2TP tristate "PPP over L2TP" depends on L2TP && PPP - ---help--- + help Support for PPP-over-L2TP socket family. L2TP is a protocol used by ISPs and enterprises to tunnel PPP traffic over UDP tunnels. L2TP is replacing PPTP for VPN uses. @@ -153,7 +153,7 @@ config PPP_ASYNC tristate "PPP support for async serial ports" depends on PPP select CRC_CCITT - ---help--- + help Say Y (or M) here if you want to be able to use PPP over standard asynchronous serial ports, such as COM1 or COM2 on a PC. If you use a modem (not a synchronous or ISDN modem) to contact your ISP, you @@ -166,7 +166,7 @@ config PPP_ASYNC config PPP_SYNC_TTY tristate "PPP support for sync tty ports" depends on PPP - ---help--- + help Say Y (or M) here if you want to be able to use PPP over synchronous (HDLC) tty devices, such as the SyncLink adapter. These devices are often used for high-speed leased lines like T1/E1. diff --git a/drivers/net/slip/Kconfig b/drivers/net/slip/Kconfig index 30bbafb0e3c7..ea68fc15c945 100644 --- a/drivers/net/slip/Kconfig +++ b/drivers/net/slip/Kconfig @@ -6,7 +6,7 @@ config SLIP tristate "SLIP (serial line) support" depends on TTY - ---help--- + help Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to connect to your Internet service provider or to connect to some other local Unix box or if you want to configure your Linux box as a @@ -36,7 +36,7 @@ config SLIP config SLHC tristate - ---help--- + help This option enables Van Jacobsen serial line header compression routines. @@ -46,7 +46,7 @@ config SLIP_COMPRESSED bool "CSLIP compressed headers" depends on SLIP select SLHC - ---help--- + help This protocol is faster than SLIP because it uses compression on the TCP/IP headers (not on the data itself), but it has to be supported on both ends. Ask your access provider if you are not sure and @@ -61,7 +61,7 @@ config SLIP_COMPRESSED config SLIP_SMART bool "Keepalive and linefill" depends on SLIP - ---help--- + help Adds additional capabilities to the SLIP driver to support the RELCOM line fill and keepalive monitoring. Ideal on poor quality analogue lines. @@ -69,7 +69,7 @@ config SLIP_SMART config SLIP_MODE_SLIP6 bool "Six bit SLIP encapsulation" depends on SLIP - ---help--- + help Just occasionally you may need to run IP over hostile serial networks that don't pass all control characters or are only seven bit. Saying Y here adds an extra mode you can use with SLIP: diff --git a/drivers/net/team/Kconfig b/drivers/net/team/Kconfig index 2aa9fd7b57df..4d449845dac7 100644 --- a/drivers/net/team/Kconfig +++ b/drivers/net/team/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig NET_TEAM tristate "Ethernet team driver support" - ---help--- + help This allows one to create virtual interfaces that teams together multiple ethernet devices. @@ -18,7 +18,7 @@ if NET_TEAM config NET_TEAM_MODE_BROADCAST tristate "Broadcast mode support" depends on NET_TEAM - ---help--- + help Basic mode where packets are transmitted always by all suitable ports. All added ports are setup to have team's device address. @@ -29,7 +29,7 @@ config NET_TEAM_MODE_BROADCAST config NET_TEAM_MODE_ROUNDROBIN tristate "Round-robin mode support" depends on NET_TEAM - ---help--- + help Basic mode where port used for transmitting packets is selected in round-robin fashion using packet counter. @@ -41,7 +41,7 @@ config NET_TEAM_MODE_ROUNDROBIN config NET_TEAM_MODE_RANDOM tristate "Random mode support" depends on NET_TEAM - ---help--- + help Basic mode where port used for transmitting packets is selected randomly. @@ -53,7 +53,7 @@ config NET_TEAM_MODE_RANDOM config NET_TEAM_MODE_ACTIVEBACKUP tristate "Active-backup mode support" depends on NET_TEAM - ---help--- + help Only one port is active at a time and the rest of ports are used for backup. @@ -66,7 +66,7 @@ config NET_TEAM_MODE_ACTIVEBACKUP config NET_TEAM_MODE_LOADBALANCE tristate "Load-balance mode support" depends on NET_TEAM - ---help--- + help This mode provides load balancing functionality. Tx port selection is done using BPF function set up from userspace (bpf_hash_func option) diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 05bdcc5917f6..a7fbc3ccd29e 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -15,7 +15,7 @@ if USB_NET_DRIVERS config USB_CATC tristate "USB CATC NetMate-based Ethernet device support" select CRC32 - ---help--- + help Say Y if you want to use one of the following 10Mbps USB Ethernet device based on the EL1210A chip. Supported devices are: Belkin F5U011 @@ -33,7 +33,7 @@ config USB_CATC config USB_KAWETH tristate "USB KLSI KL5USB101-based ethernet device support" - ---help--- + help Say Y here if you want to use one of the following 10Mbps only USB Ethernet adapters based on the KLSI KL5KUSB101B chipset: 3Com 3C19250 @@ -73,7 +73,7 @@ config USB_KAWETH config USB_PEGASUS tristate "USB Pegasus/Pegasus-II based ethernet device support" select MII - ---help--- + help Say Y here if you know you have Pegasus or Pegasus-II based adapter. If in doubt then look at <file:drivers/net/usb/pegasus.h> for the complete list of supported devices. @@ -128,7 +128,7 @@ config USB_LAN78XX config USB_USBNET tristate "Multi-purpose USB Networking Framework" select MII - ---help--- + help This driver supports several kinds of network links over USB, with "minidrivers" built around a common network driver core that supports deep queues for efficient transfers. (This gives @@ -321,7 +321,7 @@ config USB_NET_SR9800 tristate "CoreChip-sz SR9800 based USB 2.0 10/100 ethernet devices" depends on USB_USBNET select CRC32 - ---help--- + help Say Y if you want to use one of the following 100Mbps USB Ethernet device based on the CoreChip-sz SR9800 chip. @@ -570,7 +570,7 @@ config USB_CDC_PHONET config USB_IPHETH tristate "Apple iPhone USB Ethernet driver" default n - ---help--- + help Module used to share Internet connection (tethering) from your iPhone (Original, 3G and 3GS) to your system. Note that you need userspace libraries and programs that are needed diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 3e21726c36e8..39e5ab261d7c 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -5,7 +5,7 @@ menuconfig WAN bool "Wan interfaces support" - ---help--- + help Wide Area Networks (WANs), such as X.25, Frame Relay and leased lines, are used to interconnect Local Area Networks (LANs) over vast distances with data transfer rates significantly higher than those @@ -39,7 +39,7 @@ config HOSTESS_SV11 config COSA tristate "COSA/SRP sync serial boards support" depends on ISA && m && ISA_DMA_API && HDLC && VIRT_TO_BUS - ---help--- + help Driver for COSA and SRP synchronous serial boards. These boards allow to connect synchronous serial devices (for example @@ -63,7 +63,7 @@ config COSA config LANMEDIA tristate "LanMedia Corp. SSI/V.35, T1/E1, HSSI, T3 boards" depends on PCI && VIRT_TO_BUS && HDLC - ---help--- + help Driver for the following Lan Media family of serial boards: - LMC 1000 board allows you to connect synchronous serial devices @@ -251,7 +251,7 @@ config C101 config FARSYNC tristate "FarSync T-Series support" depends on HDLC && PCI - ---help--- + help Support for the FarSync T-Series X.21 (and V.35/V.24) cards by FarSite Communications Ltd. @@ -323,7 +323,7 @@ config IXP4XX_HSS config DLCI tristate "Frame Relay DLCI support" - ---help--- + help Support for the Frame Relay protocol. Frame Relay is a fast low-cost way to connect to a remote Internet @@ -370,7 +370,7 @@ config SDLA config LAPBETHER tristate "LAPB over Ethernet driver" depends on LAPB && X25 - ---help--- + help Driver for a pseudo device (typically called /dev/lapb0) which allows you to open an LAPB point-to-point connection to some other computer on your Ethernet network. @@ -386,7 +386,7 @@ config LAPBETHER config X25_ASY tristate "X.25 async driver" depends on LAPB && X25 && TTY - ---help--- + help Send and receive X.25 frames over regular asynchronous serial lines such as telephone lines equipped with ordinary modems. @@ -401,7 +401,7 @@ config X25_ASY config SBNI tristate "Granch SBNI12 Leased Line adapter support" depends on X86 - ---help--- + help Driver for ISA SBNI12-xx cards which are low cost alternatives to leased line modems. diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 15b0ad171f4c..8ab62bb6b853 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -9,7 +9,7 @@ menuconfig WLAN depends on NET select WIRELESS default y - ---help--- + help This section contains all the pre 802.11 and 802.11 wireless device drivers. For a complete list of drivers and documentation on them refer to the wireless wiki: @@ -54,7 +54,7 @@ config PCMCIA_RAYCS select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV - ---help--- + help Say Y here if you intend to attach an Aviator/Raytheon PCMCIA (PC-card) wireless Ethernet networking card to your computer. Please read the file <file:Documentation/networking/ray_cs.rst> for @@ -76,7 +76,7 @@ config PCMCIA_WL3501 config MAC80211_HWSIM tristate "Simulated radio testing tool for mac80211" depends on MAC80211 - ---help--- + help This driver is a developer testing tool that can be used to test IEEE 802.11 networking stack (mac80211) functionality. This is not needed for normal wireless LAN usage and is only for testing. See @@ -94,7 +94,7 @@ config USB_NET_RNDIS_WLAN select USB_USBNET select USB_NET_CDCETHER select USB_NET_RNDIS_HOST - ---help--- + help This is a driver for wireless RNDIS devices. These are USB based adapters found in devices such as: @@ -118,7 +118,7 @@ config USB_NET_RNDIS_WLAN config VIRT_WIFI tristate "Wifi wrapper for ethernet drivers" depends on CFG80211 - ---help--- + help This option adds support for ethernet connections to appear as if they are wifi connections through a special rtnetlink device. diff --git a/drivers/net/wireless/admtek/Kconfig b/drivers/net/wireless/admtek/Kconfig index a91cc1459c96..678979a1d987 100644 --- a/drivers/net/wireless/admtek/Kconfig +++ b/drivers/net/wireless/admtek/Kconfig @@ -2,7 +2,7 @@ config WLAN_VENDOR_ADMTEK bool "ADMtek devices" default y - ---help--- + help If you have a wireless card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -17,7 +17,7 @@ config ADM8211 depends on MAC80211 && PCI select CRC32 select EEPROM_93CX6 - ---help--- + help This driver is for ADM8211A, ADM8211B, and ADM8211C based cards. These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as: diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig index b10972b6cba4..6e9d46b96555 100644 --- a/drivers/net/wireless/ath/Kconfig +++ b/drivers/net/wireless/ath/Kconfig @@ -5,7 +5,7 @@ config ATH_COMMON config WLAN_VENDOR_ATH bool "Atheros/Qualcomm devices" default y - ---help--- + help If you have a wireless card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -25,7 +25,7 @@ if WLAN_VENDOR_ATH config ATH_DEBUG bool "Atheros wireless debugging" - ---help--- + help Say Y, if you want to debug atheros wireless drivers. Right now only ath9k makes use of this. @@ -33,7 +33,7 @@ config ATH_TRACEPOINTS bool "Atheros wireless tracing" depends on ATH_DEBUG depends on EVENT_TRACING - ---help--- + help This option enables tracepoints for atheros wireless drivers. Currently, ath9k makes use of this facility. @@ -41,7 +41,7 @@ config ATH_REG_DYNAMIC_USER_REG_HINTS bool "Atheros dynamic user regulatory hints" depends on CFG80211_CERTIFICATION_ONUS default n - ---help--- + help Say N. This should only be enabled in countries where this feature is explicitly allowed and only on cards that specifically have been tested for this. @@ -50,7 +50,7 @@ config ATH_REG_DYNAMIC_USER_CERT_TESTING bool "Atheros dynamic user regulatory testing" depends on ATH_REG_DYNAMIC_USER_REG_HINTS && CFG80211_CERTIFICATION_ONUS default n - ---help--- + help Say N. This should only be enabled on systems undergoing certification testing. diff --git a/drivers/net/wireless/ath/ar5523/Kconfig b/drivers/net/wireless/ath/ar5523/Kconfig index e82df5f1ea67..0d838c1e7b12 100644 --- a/drivers/net/wireless/ath/ar5523/Kconfig +++ b/drivers/net/wireless/ath/ar5523/Kconfig @@ -4,6 +4,6 @@ config AR5523 depends on MAC80211 && USB select ATH_COMMON select FW_LOADER - ---help--- + help This module add support for AR5523 based USB dongles such as D-Link DWL-G132, Netgear WPN111 and many more. diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig index b99fd0eff994..40f91bc8514d 100644 --- a/drivers/net/wireless/ath/ath10k/Kconfig +++ b/drivers/net/wireless/ath/ath10k/Kconfig @@ -6,7 +6,7 @@ config ATH10K select CRC32 select WANT_DEV_COREDUMP select ATH10K_CE - ---help--- + help This module adds support for wireless adapters based on Atheros IEEE 802.11ac family of chipsets. @@ -18,25 +18,25 @@ config ATH10K_CE config ATH10K_PCI tristate "Atheros ath10k PCI support" depends on ATH10K && PCI - ---help--- + help This module adds support for PCIE bus config ATH10K_AHB bool "Atheros ath10k AHB support" depends on ATH10K_PCI && OF && RESET_CONTROLLER - ---help--- + help This module adds support for AHB bus config ATH10K_SDIO tristate "Atheros ath10k SDIO support" depends on ATH10K && MMC - ---help--- + help This module adds support for SDIO/MMC bus. config ATH10K_USB tristate "Atheros ath10k USB support (EXPERIMENTAL)" depends on ATH10K && USB - ---help--- + help This module adds experimental support for USB bus. Currently work in progress and will not fully work. @@ -45,14 +45,14 @@ config ATH10K_SNOC depends on ATH10K depends on ARCH_QCOM || COMPILE_TEST select QCOM_QMI_HELPERS - ---help--- + help This module adds support for integrated WCN3990 chip connected to system NOC(SNOC). config ATH10K_DEBUG bool "Atheros ath10k debugging" depends on ATH10K - ---help--- + help Enables debug support If unsure, say Y to make it easier to debug problems. @@ -60,7 +60,7 @@ config ATH10K_DEBUG config ATH10K_DEBUGFS bool "Atheros ath10k debugfs support" depends on ATH10K && DEBUG_FS - ---help--- + help Enabled debugfs support If unsure, say Y to make it easier to debug problems. @@ -70,20 +70,20 @@ config ATH10K_SPECTRAL depends on ATH10K_DEBUGFS select RELAY default n - ---help--- + help Say Y to enable access to the FFT/spectral data via debugfs. config ATH10K_TRACING bool "Atheros ath10k tracing support" depends on ATH10K depends on EVENT_TRACING - ---help--- + help Select this to ath10k use tracing infrastructure. config ATH10K_DFS_CERTIFIED bool "Atheros DFS support for certified platforms" depends on ATH10K && CFG80211_CERTIFICATION_ONUS default n - ---help--- + help This option enables DFS support for initiating radiation on ath10k. diff --git a/drivers/net/wireless/ath/ath11k/Kconfig b/drivers/net/wireless/ath/ath11k/Kconfig index 738f99090d83..7acb42e2e6e2 100644 --- a/drivers/net/wireless/ath/ath11k/Kconfig +++ b/drivers/net/wireless/ath/ath11k/Kconfig @@ -7,7 +7,7 @@ config ATH11K depends on ARCH_QCOM || COMPILE_TEST select ATH_COMMON select QCOM_QMI_HELPERS - ---help--- + help This module adds support for Qualcomm Technologies 802.11ax family of chipsets. @@ -16,7 +16,7 @@ config ATH11K config ATH11K_DEBUG bool "QCA ath11k debugging" depends on ATH11K - ---help--- + help Enables debug support If unsure, say Y to make it easier to debug problems. @@ -24,7 +24,7 @@ config ATH11K_DEBUG config ATH11K_DEBUGFS bool "QCA ath11k debugfs support" depends on ATH11K && DEBUG_FS && MAC80211_DEBUGFS - ---help--- + help Enable ath11k debugfs support If unsure, say Y to make it easier to debug problems. @@ -32,5 +32,5 @@ config ATH11K_DEBUGFS config ATH11K_TRACING bool "ath11k tracing support" depends on ATH11K && EVENT_TRACING - ---help--- + help Select this to use ath11k tracing infrastructure. diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig index 96010d4b00e7..f35cd8de228e 100644 --- a/drivers/net/wireless/ath/ath5k/Kconfig +++ b/drivers/net/wireless/ath/ath5k/Kconfig @@ -8,7 +8,7 @@ config ATH5K select NEW_LEDS select ATH5K_AHB if ATH25 select ATH5K_PCI if !ATH25 - ---help--- + help This module adds support for wireless adapters based on Atheros 5xxx chipset. @@ -25,7 +25,7 @@ config ATH5K config ATH5K_DEBUG bool "Atheros 5xxx debugging" depends on ATH5K - ---help--- + help Atheros 5xxx debugging messages. Say Y, if and you will get debug options for ath5k. @@ -45,7 +45,7 @@ config ATH5K_TRACER bool "Atheros 5xxx tracer" depends on ATH5K depends on EVENT_TRACING - ---help--- + help Say Y here to enable tracepoints for the ath5k driver using the kernel tracing infrastructure. Select this option if you are interested in debugging the driver. @@ -55,21 +55,21 @@ config ATH5K_TRACER config ATH5K_AHB bool "Atheros 5xxx AHB bus support" depends on ATH25 && ATH5K - ---help--- + help This adds support for WiSoC type chipsets of the 5xxx Atheros family. config ATH5K_PCI bool "Atheros 5xxx PCI bus support" depends on (!ATH25 && PCI) - ---help--- + help This adds support for PCI type chipsets of the 5xxx Atheros family. config ATH5K_TEST_CHANNELS bool "Enables testing channels on ath5k" depends on ATH5K && CFG80211_CERTIFICATION_ONUS - ---help--- + help This enables non-standard IEEE 802.11 channels on ath5k, which can be used for research purposes. This option should be disabled unless doing research. diff --git a/drivers/net/wireless/ath/ath6kl/Kconfig b/drivers/net/wireless/ath/ath6kl/Kconfig index 62c22fdcca38..cd96cf8d9940 100644 --- a/drivers/net/wireless/ath/ath6kl/Kconfig +++ b/drivers/net/wireless/ath/ath6kl/Kconfig @@ -2,7 +2,7 @@ config ATH6KL tristate "Atheros mobile chipsets support" depends on CFG80211 - ---help--- + help This module adds core support for wireless adapters based on Atheros AR6003 and AR6004 chipsets. You still need separate bus drivers for USB and SDIO to be able to use real devices. @@ -15,7 +15,7 @@ config ATH6KL_SDIO tristate "Atheros ath6kl SDIO support" depends on ATH6KL depends on MMC - ---help--- + help This module adds support for wireless adapters based on Atheros AR6003 and AR6004 chipsets running over SDIO. If you choose to build it as a module, it will be called ath6kl_sdio. @@ -26,7 +26,7 @@ config ATH6KL_USB tristate "Atheros ath6kl USB support" depends on ATH6KL depends on USB - ---help--- + help This module adds support for wireless adapters based on Atheros AR6004 chipset and chipsets based on it running over USB. If you choose to build it as a module, it will be @@ -35,7 +35,7 @@ config ATH6KL_USB config ATH6KL_DEBUG bool "Atheros ath6kl debugging" depends on ATH6KL - ---help--- + help Enables ath6kl debug support, including debug messages enabled with debug_mask module parameter and debugfs interface. @@ -46,7 +46,7 @@ config ATH6KL_TRACING bool "Atheros ath6kl tracing support" depends on ATH6KL depends on EVENT_TRACING - ---help--- + help Select this to ath6kl use tracing infrastructure which, for example, can be enabled with help of trace-cmd. All debug messages and commands are delivered to using individually @@ -58,7 +58,7 @@ config ATH6KL_REGDOMAIN bool "Atheros ath6kl regdomain support" depends on ATH6KL depends on CFG80211_CERTIFICATION_ONUS - ---help--- + help Enabling this makes it possible to change the regdomain in the firmware. This can be only enabled if regulatory requirements are taken into account. diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index 78620c6b64a2..42bfdb4a6214 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -14,7 +14,7 @@ config ATH9K_BTCOEX_SUPPORT bool "Atheros bluetooth coexistence support" depends on (ATH9K || ATH9K_HTC) default y - ---help--- + help Say Y, if you want to use the ath9k/ath9k_htc radios together with Bluetooth modules in the same system. @@ -26,7 +26,7 @@ config ATH9K select LEDS_CLASS select NEW_LEDS select ATH9K_COMMON - ---help--- + help This module adds support for wireless adapters based on Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family of chipsets. For a specific list of supported external @@ -42,7 +42,7 @@ config ATH9K_PCI bool "Atheros ath9k PCI/PCIe bus support" default y depends on ATH9K && PCI - ---help--- + help This option enables the PCI bus support in ath9k. Say Y, if you have a compatible PCI/PCIe wireless card. @@ -51,7 +51,7 @@ config ATH9K_AHB bool "Atheros ath9k AHB bus support" depends on ATH9K default n - ---help--- + help This option enables the AHB bus support in ath9k. Say Y, if you have a SoC with a compatible built-in @@ -62,7 +62,7 @@ config ATH9K_DEBUGFS depends on ATH9K && DEBUG_FS select MAC80211_DEBUGFS select ATH9K_COMMON_DEBUG - ---help--- + help Say Y, if you need access to ath9k's statistics for interrupts, rate control, etc. @@ -74,14 +74,14 @@ config ATH9K_STATION_STATISTICS depends on ATH9K && ATH9K_DEBUGFS && DEBUG_FS select MAC80211_DEBUGFS default n - ---help--- + help This option enables detailed statistics for association stations. config ATH9K_TX99 bool "Atheros ath9k TX99 testing support" depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS default n - ---help--- + help Say N. This should only be enabled on systems undergoing certification testing and evaluation in a controlled environment. Enabling this will only enable TX99 support, all other modes of @@ -101,7 +101,7 @@ config ATH9K_DFS_CERTIFIED bool "Atheros DFS support for certified platforms" depends on ATH9K && CFG80211_CERTIFICATION_ONUS default n - ---help--- + help This option enables DFS support for initiating radiation on ath9k. There is no way to dynamically detect if a card was DFS certified and as such this is left as a build time option. This @@ -120,7 +120,7 @@ config ATH9K_DYNACK bool "Atheros ath9k ACK timeout estimation algorithm" depends on ATH9K default n - ---help--- + help This option enables ath9k dynamic ACK timeout estimation algorithm based on ACK frame RX timestamp, TX frame timestamp and frame duration @@ -129,7 +129,7 @@ config ATH9K_WOW bool "Wake on Wireless LAN support (EXPERIMENTAL)" depends on ATH9K && PM default n - ---help--- + help This option enables Wake on Wireless LAN support for certain cards. Currently, AR9462 is supported. @@ -147,7 +147,7 @@ config ATH9K_CHANNEL_CONTEXT bool "Channel Context support" depends on ATH9K default n - ---help--- + help This option enables channel context support in ath9k, which is needed for multi-channel concurrency. Enable this if P2P PowerSave support is required. @@ -181,7 +181,7 @@ config ATH9K_HTC select LEDS_CLASS select NEW_LEDS select ATH9K_COMMON - ---help--- + help Support for Atheros HTC based cards. Chipsets supported: AR9271 @@ -193,7 +193,7 @@ config ATH9K_HTC_DEBUGFS bool "Atheros ath9k_htc debugging" depends on ATH9K_HTC && DEBUG_FS select ATH9K_COMMON_DEBUG - ---help--- + help Say Y, if you need access to ath9k_htc's statistics. As well as access to the FFT/spectral data. @@ -201,7 +201,7 @@ config ATH9K_HWRNG bool "Random number generator support" depends on ATH9K && (HW_RANDOM = y || HW_RANDOM = ATH9K) default n - ---help--- + help This option incorporates the ADC register output as a source of randomness into Linux entropy pool (/dev/urandom and /dev/random) @@ -213,5 +213,5 @@ config ATH9K_COMMON_SPECTRAL depends on ATH9K_DEBUGFS || ATH9K_HTC_DEBUGFS select RELAY default n - ---help--- + help Say Y to enable access to the FFT/spectral data via debugfs. diff --git a/drivers/net/wireless/ath/wcn36xx/Kconfig b/drivers/net/wireless/ath/wcn36xx/Kconfig index a4b153470a2c..5832c7ef9352 100644 --- a/drivers/net/wireless/ath/wcn36xx/Kconfig +++ b/drivers/net/wireless/ath/wcn36xx/Kconfig @@ -4,7 +4,7 @@ config WCN36XX depends on MAC80211 && HAS_DMA depends on QCOM_WCNSS_CTRL || QCOM_WCNSS_CTRL=n depends on RPMSG || RPMSG=n - ---help--- + help This module adds support for wireless adapters based on Qualcomm Atheros WCN3660 and WCN3680 mobile chipsets. @@ -13,7 +13,7 @@ config WCN36XX config WCN36XX_DEBUGFS bool "WCN36XX debugfs support" depends on WCN36XX - ---help--- + help Enabled debugfs support If unsure, say Y to make it easier to debug problems. diff --git a/drivers/net/wireless/ath/wil6210/Kconfig b/drivers/net/wireless/ath/wil6210/Kconfig index 0d1a8dab30ed..dadba2d41bbb 100644 --- a/drivers/net/wireless/ath/wil6210/Kconfig +++ b/drivers/net/wireless/ath/wil6210/Kconfig @@ -5,7 +5,7 @@ config WIL6210 depends on CFG80211 depends on PCI default n - ---help--- + help This module adds support for wireless adapter based on wil6210 chip by Wilocity. It supports operation on the 60 GHz band, covered by the IEEE802.11ad standard. @@ -19,7 +19,7 @@ config WIL6210_ISR_COR bool "Use Clear-On-Read mode for ISR registers for wil6210" depends on WIL6210 default y - ---help--- + help ISR registers on wil6210 chip may operate in either COR (Clear-On-Read) or W1C (Write-1-to-Clear) mode. For production code, use COR (say y); is default since @@ -35,7 +35,7 @@ config WIL6210_TRACING depends on WIL6210 depends on EVENT_TRACING default n - ---help--- + help Say Y here to enable tracepoints for the wil6210 driver using the kernel tracing infrastructure. Select this option if you are interested in debugging the driver. @@ -47,7 +47,7 @@ config WIL6210_DEBUGFS depends on WIL6210 depends on DEBUG_FS default y - ---help--- + help Say Y here to enable wil6210 debugfs support, using the kernel debugfs infrastructure. Select this option if you are interested in debugging the driver. diff --git a/drivers/net/wireless/atmel/Kconfig b/drivers/net/wireless/atmel/Kconfig index c2142c70f25d..ca45a1021cf4 100644 --- a/drivers/net/wireless/atmel/Kconfig +++ b/drivers/net/wireless/atmel/Kconfig @@ -2,7 +2,7 @@ config WLAN_VENDOR_ATMEL bool "Atmel devices" default y - ---help--- + help If you have a wireless card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -19,7 +19,7 @@ config ATMEL select WEXT_PRIV select FW_LOADER select CRC32 - ---help--- + help A driver 802.11b wireless cards based on the Atmel fast-vnet chips. This driver supports standard Linux wireless extensions. @@ -33,7 +33,7 @@ config ATMEL config PCI_ATMEL tristate "Atmel at76c506 PCI cards" depends on ATMEL && PCI - ---help--- + help Enable support for PCI and mini-PCI cards containing the Atmel at76c506 chip. @@ -43,7 +43,7 @@ config PCMCIA_ATMEL select WIRELESS_EXT select FW_LOADER select CRC32 - ---help--- + help Enable support for PCMCIA cards containing the Atmel at76c502 and at76c504 chips. @@ -51,7 +51,7 @@ config AT76C50X_USB tristate "Atmel at76c503/at76c505/at76c505a USB cards" depends on MAC80211 && USB select FW_LOADER - ---help--- + help Enable support for USB Wireless devices using Atmel at76c503, at76c505 or at76c505a chips. diff --git a/drivers/net/wireless/broadcom/Kconfig b/drivers/net/wireless/broadcom/Kconfig index bb1cb402a919..f74333366a90 100644 --- a/drivers/net/wireless/broadcom/Kconfig +++ b/drivers/net/wireless/broadcom/Kconfig @@ -2,7 +2,7 @@ config WLAN_VENDOR_BROADCOM bool "Broadcom devices" default y - ---help--- + help If you have a wireless card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the diff --git a/drivers/net/wireless/broadcom/b43/Kconfig b/drivers/net/wireless/broadcom/b43/Kconfig index 3b582e76762b..4559549b80fe 100644 --- a/drivers/net/wireless/broadcom/b43/Kconfig +++ b/drivers/net/wireless/broadcom/b43/Kconfig @@ -6,7 +6,7 @@ config B43 select SSB if B43_SSB select FW_LOADER select CORDIC - ---help--- + help b43 is a driver for the Broadcom 43xx series wireless devices. Check "lspci" for something like @@ -77,7 +77,7 @@ config B43_SDIO bool "Broadcom 43xx SDIO device support" depends on B43 && B43_SSB && SSB_SDIOHOST_POSSIBLE select SSB_SDIOHOST - ---help--- + help Broadcom 43xx device support for Soft-MAC SDIO devices. With this config option you can drive Soft-MAC b43 cards with a @@ -108,7 +108,7 @@ config B43_PHY_G bool "Support for G-PHY (802.11g) devices" depends on B43 && B43_SSB default y - ---help--- + help This PHY type can be found in the following chipsets: PCI: BCM4306, BCM4311, BCM4318 SoC: BCM4712, BCM5352E @@ -117,7 +117,7 @@ config B43_PHY_N bool "Support for N-PHY (the main 802.11n series) devices" depends on B43 default y - ---help--- + help This PHY type can be found in the following chipsets: PCI: BCM4321, BCM4322, BCM43222, BCM43224, BCM43225, @@ -128,7 +128,7 @@ config B43_PHY_LP bool "Support for LP-PHY (low-power 802.11g) devices" depends on B43 && B43_SSB default y - ---help--- + help The LP-PHY is a low-power PHY built into some notebooks and embedded devices. It supports 802.11a/b/g (802.11a support is optional, and currently disabled). @@ -137,13 +137,13 @@ config B43_PHY_HT bool "Support for HT-PHY (high throughput 802.11n) devices" depends on B43 && B43_BCMA default y - ---help--- + help This PHY type with 3x3:3 MIMO can be found in the BCM4331 PCI chipset. config B43_PHY_LCN bool "Support for LCN-PHY devices (BROKEN)" depends on B43 && BROKEN - ---help--- + help Support for the LCN-PHY. Say N, this is BROKEN and crashes driver. @@ -151,7 +151,7 @@ config B43_PHY_LCN config B43_PHY_AC bool "Support for AC-PHY (802.11ac) devices (BROKEN)" depends on B43 && B43_BCMA && BROKEN - ---help--- + help This PHY type can be found in the following chipsets: PCI: BCM4352, BCM4360 @@ -174,7 +174,7 @@ config B43_HWRNG config B43_DEBUG bool "Broadcom 43xx debugging" depends on B43 - ---help--- + help Broadcom 43xx debugging. This adds additional runtime sanity checks and statistics to the driver. diff --git a/drivers/net/wireless/broadcom/b43legacy/Kconfig b/drivers/net/wireless/broadcom/b43legacy/Kconfig index bfac34142ab5..e4da34ec4f5b 100644 --- a/drivers/net/wireless/broadcom/b43legacy/Kconfig +++ b/drivers/net/wireless/broadcom/b43legacy/Kconfig @@ -4,7 +4,7 @@ config B43LEGACY depends on SSB_POSSIBLE && MAC80211 && HAS_DMA select SSB select FW_LOADER - ---help--- + help b43legacy is a driver for 802.11b devices from Broadcom (BCM4301 and BCM4303) and early model 802.11g chips (BCM4306 Ver. 2) used in the Linksys WPC54G V1 PCMCIA devices. @@ -54,7 +54,7 @@ config B43LEGACY_DEBUG bool "Broadcom 43xx-legacy debugging" depends on B43LEGACY default y - ---help--- + help Say Y, because this information will help you get the driver running. This option generates a minimum of log output. @@ -75,7 +75,7 @@ config B43LEGACY_DMA_AND_PIO_MODE bool "DMA + PIO" select B43LEGACY_DMA select B43LEGACY_PIO - ---help--- + help Include both, Direct Memory Access (DMA) and Programmed I/O (PIO) data transfer modes. The mode actually used is selectable through the module parameter "pio". With pio=0 as a module parameter, the @@ -86,14 +86,14 @@ config B43LEGACY_DMA_AND_PIO_MODE config B43LEGACY_DMA_MODE bool "DMA (Direct Memory Access) only" select B43LEGACY_DMA - ---help--- + help Only include Direct Memory Access (DMA). This reduces the size of the driver module, by omitting the PIO code. config B43LEGACY_PIO_MODE bool "PIO (Programmed I/O) only" select B43LEGACY_PIO - ---help--- + help Only include Programmed I/O (PIO). This reduces the size of the driver module, by omitting the DMA code. Please note that PIO transfers are slow (compared to DMA). diff --git a/drivers/net/wireless/broadcom/brcm80211/Kconfig b/drivers/net/wireless/broadcom/brcm80211/Kconfig index a5bf16c4f495..5bf2318763c5 100644 --- a/drivers/net/wireless/broadcom/brcm80211/Kconfig +++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig @@ -12,7 +12,7 @@ config BRCMSMAC select BRCMUTIL select FW_LOADER select CORDIC - ---help--- + help This module adds support for PCIe wireless adapters based on Broadcom IEEE802.11n SoftMAC chipsets. It also has WLAN led support, which will be available if you select BCMA_DRIVER_GPIO. If you choose to build a @@ -23,7 +23,7 @@ source "drivers/net/wireless/broadcom/brcm80211/brcmfmac/Kconfig" config BRCM_TRACING bool "Broadcom device tracing" depends on BRCMSMAC || BRCMFMAC - ---help--- + help If you say Y here, the Broadcom wireless drivers will register with ftrace to dump event information into the trace ringbuffer. Tracing can be enabled at runtime to aid in debugging wireless @@ -35,5 +35,5 @@ config BRCMDBG bool "Broadcom driver debug functions" depends on BRCMSMAC || BRCMFMAC select WANT_DEV_COREDUMP if BRCMFMAC - ---help--- + help Selecting this enables additional code for debug purposes. diff --git a/drivers/net/wireless/cisco/Kconfig b/drivers/net/wireless/cisco/Kconfig index 7a3b3bb2ce15..681bfc2d740a 100644 --- a/drivers/net/wireless/cisco/Kconfig +++ b/drivers/net/wireless/cisco/Kconfig @@ -2,7 +2,7 @@ config WLAN_VENDOR_CISCO bool "Cisco devices" default y - ---help--- + help If you have a wireless card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -20,7 +20,7 @@ config AIRO select CRYPTO_SKCIPHER select WEXT_SPY select WEXT_PRIV - ---help--- + help This is the standard Linux driver to support Cisco/Aironet ISA and PCI 802.11 wireless cards. It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X @@ -42,7 +42,7 @@ config AIRO_CS select CRYPTO select CRYPTO_AES select CRYPTO_CTR - ---help--- + help This is the standard Linux driver to support Cisco/Aironet PCMCIA 802.11 wireless cards. This driver is the same as the Aironet driver part of the Linux Pcmcia package. diff --git a/drivers/net/wireless/intel/Kconfig b/drivers/net/wireless/intel/Kconfig index 6ec42f67d0f2..3d1d7d11a396 100644 --- a/drivers/net/wireless/intel/Kconfig +++ b/drivers/net/wireless/intel/Kconfig @@ -2,7 +2,7 @@ config WLAN_VENDOR_INTEL bool "Intel devices" default y - ---help--- + help If you have a wireless card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the diff --git a/drivers/net/wireless/intel/ipw2x00/Kconfig b/drivers/net/wireless/intel/ipw2x00/Kconfig index f42b3cdce611..d00386915a9d 100644 --- a/drivers/net/wireless/intel/ipw2x00/Kconfig +++ b/drivers/net/wireless/intel/ipw2x00/Kconfig @@ -12,7 +12,7 @@ config IPW2100 select FW_LOADER select LIB80211 select LIBIPW - ---help--- + help A driver for the Intel PRO/Wireless 2100 Network Connection 802.11b wireless network adapter. @@ -41,7 +41,7 @@ config IPW2100 config IPW2100_MONITOR bool "Enable promiscuous mode" depends on IPW2100 - ---help--- + help Enables promiscuous/monitor mode support for the ipw2100 driver. With this feature compiled into the driver, you can switch to promiscuous mode via the Wireless Tool's Monitor mode. While in this @@ -50,7 +50,7 @@ config IPW2100_MONITOR config IPW2100_DEBUG bool "Enable full debugging output in IPW2100 module." depends on IPW2100 - ---help--- + help This option will enable debug tracing output for the IPW2100. This will result in the kernel module being ~60k larger. You can @@ -74,7 +74,7 @@ config IPW2200 select FW_LOADER select LIB80211 select LIBIPW - ---help--- + help A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network Connection adapters. @@ -103,7 +103,7 @@ config IPW2200 config IPW2200_MONITOR bool "Enable promiscuous mode" depends on IPW2200 - ---help--- + help Enables promiscuous/monitor mode support for the ipw2200 driver. With this feature compiled into the driver, you can switch to promiscuous mode via the Wireless Tool's Monitor mode. While in this @@ -117,7 +117,7 @@ config IPW2200_PROMISCUOUS bool "Enable creation of a RF radiotap promiscuous interface" depends on IPW2200_MONITOR select IPW2200_RADIOTAP - ---help--- + help Enables the creation of a second interface prefixed 'rtap'. This second interface will provide every received in radiotap format. @@ -144,7 +144,7 @@ config IPW2200_QOS config IPW2200_DEBUG bool "Enable full debugging output in IPW2200 module." depends on IPW2200 - ---help--- + help This option will enable low level debug tracing output for IPW2200. Note, normal debug code is already compiled in. This low level @@ -170,7 +170,7 @@ config LIBIPW select LIB80211_CRYPT_WEP select LIB80211_CRYPT_TKIP select LIB80211_CRYPT_CCMP - ---help--- + help This option enables the hardware independent IEEE 802.11 networking stack. This component is deprecated in favor of the mac80211 component. @@ -178,7 +178,7 @@ config LIBIPW config LIBIPW_DEBUG bool "Full debugging output for the LIBIPW component" depends on LIBIPW - ---help--- + help This option will enable debug tracing output for the libipw component. diff --git a/drivers/net/wireless/intel/iwlegacy/Kconfig b/drivers/net/wireless/intel/iwlegacy/Kconfig index 100f55858b13..24fe3f63c321 100644 --- a/drivers/net/wireless/intel/iwlegacy/Kconfig +++ b/drivers/net/wireless/intel/iwlegacy/Kconfig @@ -11,7 +11,7 @@ config IWL4965 tristate "Intel Wireless WiFi 4965AGN (iwl4965)" depends on PCI && MAC80211 select IWLEGACY - ---help--- + help This option enables support for Select to build the driver supporting the: @@ -39,7 +39,7 @@ config IWL3945 tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)" depends on PCI && MAC80211 select IWLEGACY - ---help--- + help Select to build the driver supporting the: Intel PRO/Wireless 3945ABG/BG Network Connection @@ -67,7 +67,7 @@ menu "iwl3945 / iwl4965 Debugging Options" config IWLEGACY_DEBUG bool "Enable full debugging output in iwlegacy (iwl 3945/4965) drivers" depends on IWLEGACY - ---help--- + help This option will enable debug tracing output for the iwlegacy drivers. @@ -93,7 +93,7 @@ config IWLEGACY_DEBUG config IWLEGACY_DEBUGFS bool "iwlegacy (iwl 3945/4965) debugfs support" depends on IWLEGACY && MAC80211_DEBUGFS - ---help--- + help Enable creation of debugfs files for the iwlegacy drivers. This is a low-impact option that allows getting insight into the driver's state at runtime. diff --git a/drivers/net/wireless/intel/iwlwifi/Kconfig b/drivers/net/wireless/intel/iwlwifi/Kconfig index 091d621ad25f..36153fa5f96a 100644 --- a/drivers/net/wireless/intel/iwlwifi/Kconfig +++ b/drivers/net/wireless/intel/iwlwifi/Kconfig @@ -3,7 +3,7 @@ config IWLWIFI tristate "Intel Wireless WiFi Next Gen AGN - Wireless-N/Advanced-N/Ultimate-N (iwlwifi) " depends on PCI && HAS_IOMEM && CFG80211 select FW_LOADER - ---help--- + help Select to build the driver supporting the: Intel Wireless WiFi Link Next-Gen AGN @@ -96,7 +96,7 @@ menu "Debugging Options" config IWLWIFI_DEBUG bool "Enable full debugging output in the iwlwifi driver" - ---help--- + help This option will enable debug tracing output for the iwlwifi drivers This will result in the kernel module being ~100k larger. You can @@ -121,7 +121,7 @@ config IWLWIFI_DEBUG config IWLWIFI_DEBUGFS bool "iwlwifi debugfs support" depends on MAC80211_DEBUGFS - ---help--- + help Enable creation of debugfs files for the iwlwifi drivers. This is a low-impact option that allows getting insight into the driver's state at runtime. diff --git a/drivers/net/wireless/intersil/Kconfig b/drivers/net/wireless/intersil/Kconfig index 4e968912e27c..6a6ce9d4aeee 100644 --- a/drivers/net/wireless/intersil/Kconfig +++ b/drivers/net/wireless/intersil/Kconfig @@ -2,7 +2,7 @@ config WLAN_VENDOR_INTERSIL bool "Intersil devices" default y - ---help--- + help If you have a wireless card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -23,7 +23,7 @@ config PRISM54 select WEXT_SPY select WEXT_PRIV select FW_LOADER - ---help--- + help This enables support for FullMAC PCI/Cardbus prism54 devices. This driver is now deprecated in favor for the SoftMAC driver, p54pci. p54pci supports FullMAC PCI/Cardbus devices as well. diff --git a/drivers/net/wireless/intersil/hostap/Kconfig b/drivers/net/wireless/intersil/hostap/Kconfig index c70dc168dc63..6ad88299432f 100644 --- a/drivers/net/wireless/intersil/hostap/Kconfig +++ b/drivers/net/wireless/intersil/hostap/Kconfig @@ -15,7 +15,7 @@ config HOSTAP select LIB80211_CRYPT_WEP select LIB80211_CRYPT_TKIP select LIB80211_CRYPT_CCMP - ---help--- + help Shared driver code for IEEE 802.11b wireless cards based on Intersil Prism2/2.5/3 chipset. This driver supports so called Host AP mode that allows the card to act as an IEEE 802.11 @@ -36,7 +36,7 @@ config HOSTAP config HOSTAP_FIRMWARE bool "Support downloading firmware images with Host AP driver" depends on HOSTAP - ---help--- + help Configure Host AP driver to include support for firmware image download. This option by itself only enables downloading to the volatile memory, i.e. the card RAM. This option is required to @@ -49,7 +49,7 @@ config HOSTAP_FIRMWARE config HOSTAP_FIRMWARE_NVRAM bool "Support for non-volatile firmware download" depends on HOSTAP_FIRMWARE - ---help--- + help Allow Host AP driver to write firmware images to the non-volatile card memory, i.e. flash memory that survives power cycling. Enable this option if you want to be able to change card firmware @@ -61,7 +61,7 @@ config HOSTAP_FIRMWARE_NVRAM config HOSTAP_PLX tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors" depends on PCI && HOSTAP - ---help--- + help Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based PCI adaptors. @@ -75,7 +75,7 @@ config HOSTAP_PLX config HOSTAP_PCI tristate "Host AP driver for Prism2.5 PCI adaptors" depends on PCI && HOSTAP - ---help--- + help Host AP driver's version for Prism2.5 PCI adaptors. "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this @@ -88,7 +88,7 @@ config HOSTAP_PCI config HOSTAP_CS tristate "Host AP driver for Prism2/2.5/3 PC Cards" depends on PCMCIA && HOSTAP - ---help--- + help Host AP driver's version for Prism2/2.5/3 PC Cards. "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this diff --git a/drivers/net/wireless/intersil/orinoco/Kconfig b/drivers/net/wireless/intersil/orinoco/Kconfig index c430d7a46730..c470ee23673f 100644 --- a/drivers/net/wireless/intersil/orinoco/Kconfig +++ b/drivers/net/wireless/intersil/orinoco/Kconfig @@ -10,7 +10,7 @@ config HERMES select FW_LOADER select CRYPTO select CRYPTO_MICHAEL_MIC - ---help--- + help A driver for 802.11b wireless cards based on the "Hermes" or Intersil HFA384x (Prism 2) MAC controller. This includes the vast majority of the PCMCIA 802.11b cards (which are nearly all rebadges) @@ -32,7 +32,7 @@ config HERMES config HERMES_PRISM bool "Support Prism 2/2.5 chipset" depends on HERMES - ---help--- + help Say Y to enable support for Prism 2 and 2.5 chipsets. These chipsets are better handled by the hostap driver. This driver @@ -44,7 +44,7 @@ config HERMES_CACHE_FW_ON_INIT bool "Cache Hermes firmware on driver initialisation" depends on HERMES default y - ---help--- + help Say Y to cache any firmware required by the Hermes drivers on startup. The firmware will remain cached until the driver is unloaded. The cache uses 64K of RAM. @@ -110,7 +110,7 @@ config PCI_HERMES config PCMCIA_HERMES tristate "Hermes PCMCIA card support" depends on PCMCIA && HERMES && HAS_IOPORT_MAP - ---help--- + help A driver for "Hermes" chipset based PCMCIA wireless adaptors, such as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and @@ -125,7 +125,7 @@ config PCMCIA_HERMES config PCMCIA_SPECTRUM tristate "Symbol Spectrum24 Trilogy PCMCIA card support" depends on PCMCIA && HERMES && HAS_IOPORT_MAP - ---help--- + help This is a driver for 802.11b cards using RAM-loadable Symbol firmware, such as Symbol Wireless Networker LA4100, CompactFlash @@ -139,5 +139,5 @@ config ORINOCO_USB tristate "Agere Orinoco USB support" depends on USB && HERMES select FW_LOADER - ---help--- + help This driver is for USB versions of the Agere Orinoco card. diff --git a/drivers/net/wireless/intersil/p54/Kconfig b/drivers/net/wireless/intersil/p54/Kconfig index 26cd80732afa..024be5507daf 100644 --- a/drivers/net/wireless/intersil/p54/Kconfig +++ b/drivers/net/wireless/intersil/p54/Kconfig @@ -4,7 +4,7 @@ config P54_COMMON depends on MAC80211 select FW_LOADER select CRC_CCITT - ---help--- + help This is common code for isl38xx/stlc45xx based modules. This module does nothing by itself - the USB/PCI/SPI front-ends also need to be enabled in order to support any devices. @@ -18,7 +18,7 @@ config P54_USB tristate "Prism54 USB support" depends on P54_COMMON && USB select CRC32 - ---help--- + help This driver is for USB isl38xx based wireless cards. These devices require softmac firmware which can be found at @@ -29,7 +29,7 @@ config P54_USB config P54_PCI tristate "Prism54 PCI support" depends on P54_COMMON && PCI - ---help--- + help This driver is for PCI isl38xx based wireless cards. This driver supports most devices that are supported by the fullmac prism54 driver plus many devices which are not @@ -43,7 +43,7 @@ config P54_PCI config P54_SPI tristate "Prism54 SPI (stlc45xx) support" depends on P54_COMMON && SPI_MASTER - ---help--- + help This driver is for stlc4550 or stlc4560 based wireless chips such as Nokia's N800/N810 Portable Internet Tablet. @@ -53,7 +53,7 @@ config P54_SPI_DEFAULT_EEPROM bool "Include fallback EEPROM blob" depends on P54_SPI default n - ---help--- + help Unlike the PCI or USB devices, the SPI variants don't have a dedicated EEPROM chip to store all device specific values for calibration, country and interface settings. diff --git a/drivers/net/wireless/marvell/Kconfig b/drivers/net/wireless/marvell/Kconfig index dff82fdbea78..864bc0f6d4d4 100644 --- a/drivers/net/wireless/marvell/Kconfig +++ b/drivers/net/wireless/marvell/Kconfig @@ -2,7 +2,7 @@ config WLAN_VENDOR_MARVELL bool "Marvell devices" default y - ---help--- + help If you have a wireless card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -19,7 +19,7 @@ source "drivers/net/wireless/marvell/mwifiex/Kconfig" config MWL8K tristate "Marvell 88W8xxx PCI/PCIe Wireless support" depends on MAC80211 && PCI - ---help--- + help This driver supports Marvell TOPDOG 802.11 wireless cards. To compile this driver as a module, choose M here: the module diff --git a/drivers/net/wireless/marvell/libertas/Kconfig b/drivers/net/wireless/marvell/libertas/Kconfig index b9fe598130c3..6d62ab49aa8d 100644 --- a/drivers/net/wireless/marvell/libertas/Kconfig +++ b/drivers/net/wireless/marvell/libertas/Kconfig @@ -6,37 +6,37 @@ config LIBERTAS select WEXT_SPY select LIB80211 select FW_LOADER - ---help--- + help A library for Marvell Libertas 8xxx devices. config LIBERTAS_USB tristate "Marvell Libertas 8388 USB 802.11b/g cards" depends on LIBERTAS && USB - ---help--- + help A driver for Marvell Libertas 8388 USB devices. config LIBERTAS_CS tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards" depends on LIBERTAS && PCMCIA && HAS_IOPORT_MAP - ---help--- + help A driver for Marvell Libertas 8385 CompactFlash devices. config LIBERTAS_SDIO tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards" depends on LIBERTAS && MMC - ---help--- + help A driver for Marvell Libertas 8385/8686/8688 SDIO devices. config LIBERTAS_SPI tristate "Marvell Libertas 8686 SPI 802.11b/g cards" depends on LIBERTAS && SPI - ---help--- + help A driver for Marvell Libertas 8686 SPI devices. config LIBERTAS_DEBUG bool "Enable full debugging output in the Libertas module." depends on LIBERTAS - ---help--- + help Debugging support. config LIBERTAS_MESH diff --git a/drivers/net/wireless/marvell/libertas_tf/Kconfig b/drivers/net/wireless/marvell/libertas_tf/Kconfig index aa40d65f611a..345da4a6ee8d 100644 --- a/drivers/net/wireless/marvell/libertas_tf/Kconfig +++ b/drivers/net/wireless/marvell/libertas_tf/Kconfig @@ -3,17 +3,17 @@ config LIBERTAS_THINFIRM tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware" depends on MAC80211 select FW_LOADER - ---help--- + help A library for Marvell Libertas 8xxx devices using thinfirm. config LIBERTAS_THINFIRM_DEBUG bool "Enable full debugging output in the Libertas thin firmware module." depends on LIBERTAS_THINFIRM - ---help--- + help Debugging support. config LIBERTAS_THINFIRM_USB tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware" depends on LIBERTAS_THINFIRM && USB - ---help--- + help A driver for Marvell Libertas 8388 USB devices using thinfirm. diff --git a/drivers/net/wireless/marvell/mwifiex/Kconfig b/drivers/net/wireless/marvell/mwifiex/Kconfig index 64d8a11ad1e7..2b4ff2b78a7e 100644 --- a/drivers/net/wireless/marvell/mwifiex/Kconfig +++ b/drivers/net/wireless/marvell/mwifiex/Kconfig @@ -2,7 +2,7 @@ config MWIFIEX tristate "Marvell WiFi-Ex Driver" depends on CFG80211 - ---help--- + help This adds support for wireless adapters based on Marvell 802.11n/ac chipsets. @@ -14,7 +14,7 @@ config MWIFIEX_SDIO depends on MWIFIEX && MMC select FW_LOADER select WANT_DEV_COREDUMP - ---help--- + help This adds support for wireless adapters based on Marvell 8786/8787/8797/8887/8897/8977/8987/8997 chipsets with SDIO interface. @@ -26,7 +26,7 @@ config MWIFIEX_PCIE depends on MWIFIEX && PCI select FW_LOADER select WANT_DEV_COREDUMP - ---help--- + help This adds support for wireless adapters based on Marvell 8766/8897/8997 chipsets with PCIe interface. @@ -37,7 +37,7 @@ config MWIFIEX_USB tristate "Marvell WiFi-Ex Driver for USB8766/8797/8997" depends on MWIFIEX && USB select FW_LOADER - ---help--- + help This adds support for wireless adapters based on Marvell 8797/8997 chipset with USB interface. diff --git a/drivers/net/wireless/mediatek/Kconfig b/drivers/net/wireless/mediatek/Kconfig index 02d1120f148f..bd4db128248e 100644 --- a/drivers/net/wireless/mediatek/Kconfig +++ b/drivers/net/wireless/mediatek/Kconfig @@ -2,7 +2,7 @@ config WLAN_VENDOR_MEDIATEK bool "MediaTek devices" default y - ---help--- + help If you have a wireless card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the diff --git a/drivers/net/wireless/mediatek/mt7601u/Kconfig b/drivers/net/wireless/mediatek/mt7601u/Kconfig index 0b230f303d53..4a8b96280670 100644 --- a/drivers/net/wireless/mediatek/mt7601u/Kconfig +++ b/drivers/net/wireless/mediatek/mt7601u/Kconfig @@ -3,5 +3,5 @@ config MT7601U tristate "MediaTek MT7601U (USB) support" depends on MAC80211 depends on USB - ---help--- + help This adds support for MT7601U-based wireless USB dongles. diff --git a/drivers/net/wireless/ralink/Kconfig b/drivers/net/wireless/ralink/Kconfig index 92eec8fff8fd..135a191c435d 100644 --- a/drivers/net/wireless/ralink/Kconfig +++ b/drivers/net/wireless/ralink/Kconfig @@ -2,7 +2,7 @@ config WLAN_VENDOR_RALINK bool "Ralink devices" default y - ---help--- + help If you have a wireless card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the diff --git a/drivers/net/wireless/ralink/rt2x00/Kconfig b/drivers/net/wireless/ralink/rt2x00/Kconfig index d4969d617822..dcccc290a7f5 100644 --- a/drivers/net/wireless/ralink/rt2x00/Kconfig +++ b/drivers/net/wireless/ralink/rt2x00/Kconfig @@ -2,7 +2,7 @@ menuconfig RT2X00 tristate "Ralink driver support" depends on MAC80211 && HAS_DMA - ---help--- + help This will enable the support for the Ralink drivers, developed in the rt2x00 project <http://rt2x00.serialmonkey.com>. @@ -24,7 +24,7 @@ config RT2400PCI select RT2X00_LIB_MMIO select RT2X00_LIB_PCI select EEPROM_93CX6 - ---help--- + help This adds support for rt2400 wireless chipset family. Supported chips: RT2460. @@ -36,7 +36,7 @@ config RT2500PCI select RT2X00_LIB_MMIO select RT2X00_LIB_PCI select EEPROM_93CX6 - ---help--- + help This adds support for rt2500 wireless chipset family. Supported chips: RT2560. @@ -51,7 +51,7 @@ config RT61PCI select RT2X00_LIB_CRYPTO select CRC_ITU_T select EEPROM_93CX6 - ---help--- + help This adds support for rt2501 wireless chipset family. Supported chips: RT2561, RT2561S & RT2661. @@ -68,7 +68,7 @@ config RT2800PCI select RT2X00_LIB_CRYPTO select CRC_CCITT select EEPROM_93CX6 - ---help--- + help This adds support for rt27xx/rt28xx/rt30xx wireless chipset family. Supported chips: RT2760, RT2790, RT2860, RT2880, RT2890, RT3052, RT3090, RT3091 & RT3092 @@ -80,7 +80,7 @@ if RT2800PCI config RT2800PCI_RT33XX bool "rt2800pci - Include support for rt33xx devices" default y - ---help--- + help This adds support for rt33xx wireless chipset family to the rt2800pci driver. Supported chips: RT3390 @@ -88,7 +88,7 @@ config RT2800PCI_RT33XX config RT2800PCI_RT35XX bool "rt2800pci - Include support for rt35xx devices (EXPERIMENTAL)" default y - ---help--- + help This adds support for rt35xx wireless chipset family to the rt2800pci driver. Supported chips: RT3060, RT3062, RT3562, RT3592 @@ -97,7 +97,7 @@ config RT2800PCI_RT35XX config RT2800PCI_RT53XX bool "rt2800pci - Include support for rt53xx devices (EXPERIMENTAL)" default y - ---help--- + help This adds support for rt53xx wireless chipset family to the rt2800pci driver. Supported chips: RT5390 @@ -105,7 +105,7 @@ config RT2800PCI_RT53XX config RT2800PCI_RT3290 bool "rt2800pci - Include support for rt3290 devices (EXPERIMENTAL)" default y - ---help--- + help This adds support for rt3290 wireless chipset family to the rt2800pci driver. Supported chips: RT3290 @@ -116,7 +116,7 @@ config RT2500USB depends on USB select RT2X00_LIB_USB select RT2X00_LIB_CRYPTO - ---help--- + help This adds support for rt2500 wireless chipset family. Supported chips: RT2571 & RT2572. @@ -129,7 +129,7 @@ config RT73USB select RT2X00_LIB_FIRMWARE select RT2X00_LIB_CRYPTO select CRC_ITU_T - ---help--- + help This adds support for rt2501 wireless chipset family. Supported chips: RT2571W, RT2573 & RT2671. @@ -143,7 +143,7 @@ config RT2800USB select RT2X00_LIB_FIRMWARE select RT2X00_LIB_CRYPTO select CRC_CCITT - ---help--- + help This adds support for rt27xx/rt28xx/rt30xx wireless chipset family. Supported chips: RT2770, RT2870 & RT3070, RT3071 & RT3072 @@ -154,7 +154,7 @@ if RT2800USB config RT2800USB_RT33XX bool "rt2800usb - Include support for rt33xx devices" default y - ---help--- + help This adds support for rt33xx wireless chipset family to the rt2800usb driver. Supported chips: RT3370 @@ -162,27 +162,27 @@ config RT2800USB_RT33XX config RT2800USB_RT35XX bool "rt2800usb - Include support for rt35xx devices (EXPERIMENTAL)" default y - ---help--- + help This adds support for rt35xx wireless chipset family to the rt2800usb driver. Supported chips: RT3572 config RT2800USB_RT3573 bool "rt2800usb - Include support for rt3573 devices (EXPERIMENTAL)" - ---help--- + help This enables support for RT3573 chipset based wireless USB devices in the rt2800usb driver. config RT2800USB_RT53XX bool "rt2800usb - Include support for rt53xx devices (EXPERIMENTAL)" - ---help--- + help This adds support for rt53xx wireless chipset family to the rt2800usb driver. Supported chips: RT5370 config RT2800USB_RT55XX bool "rt2800usb - Include support for rt55xx devices (EXPERIMENTAL)" - ---help--- + help This adds support for rt55xx wireless chipset family to the rt2800usb driver. Supported chips: RT5572 @@ -190,7 +190,7 @@ config RT2800USB_RT55XX config RT2800USB_UNKNOWN bool "rt2800usb - Include support for unknown (USB) devices" default n - ---help--- + help This adds support for rt2800usb devices that are known to have a rt28xx family compatible chipset, but for which the exact chipset is unknown. @@ -209,7 +209,7 @@ config RT2800SOC select RT2X00_LIB_FIRMWARE select RT2800_LIB select RT2800_LIB_MMIO - ---help--- + help This adds support for Ralink WiSoC devices. Supported chips: RT2880, RT3050, RT3052, RT3350, RT3352. @@ -256,7 +256,7 @@ config RT2X00_LIB_LEDS config RT2X00_LIB_DEBUGFS bool "Ralink debugfs support" depends on RT2X00_LIB && MAC80211_DEBUGFS - ---help--- + help Enable creation of debugfs files for the rt2x00 drivers. These debugfs files support both reading and writing of the most important register types of the rt2x00 hardware. @@ -264,7 +264,7 @@ config RT2X00_LIB_DEBUGFS config RT2X00_DEBUG bool "Ralink debug output" depends on RT2X00_LIB - ---help--- + help Enable debugging output for all rt2x00 modules endif diff --git a/drivers/net/wireless/realtek/Kconfig b/drivers/net/wireless/realtek/Kconfig index 8ea2d8d7e356..474843277fa1 100644 --- a/drivers/net/wireless/realtek/Kconfig +++ b/drivers/net/wireless/realtek/Kconfig @@ -2,7 +2,7 @@ config WLAN_VENDOR_REALTEK bool "Realtek devices" default y - ---help--- + help If you have a wireless card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the diff --git a/drivers/net/wireless/realtek/rtl818x/Kconfig b/drivers/net/wireless/realtek/rtl818x/Kconfig index e1aa3fc71e66..603812c9a43e 100644 --- a/drivers/net/wireless/realtek/rtl818x/Kconfig +++ b/drivers/net/wireless/realtek/rtl818x/Kconfig @@ -6,7 +6,7 @@ config RTL8180 tristate "Realtek 8180/8185/8187SE PCI support" depends on MAC80211 && PCI select EEPROM_93CX6 - ---help--- + help This is a driver for RTL8180, RTL8185 and RTL8187SE based cards. These are PCI based chips found in cards such as: @@ -62,7 +62,7 @@ config RTL8187 tristate "Realtek 8187 and 8187B USB support" depends on MAC80211 && USB select EEPROM_93CX6 - ---help--- + help This is a driver for RTL8187 and RTL8187B based cards. These are USB based chips found in devices such as: diff --git a/drivers/net/wireless/realtek/rtl8xxxu/Kconfig b/drivers/net/wireless/realtek/rtl8xxxu/Kconfig index 32d151cde618..a263507a77a6 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/Kconfig +++ b/drivers/net/wireless/realtek/rtl8xxxu/Kconfig @@ -5,7 +5,7 @@ config RTL8XXXU tristate "RTL8723AU/RTL8188[CR]U/RTL819[12]CU (mac80211) support" depends on MAC80211 && USB - ---help--- + help This is an alternative driver for various Realtek RTL8XXX parts written to utilize the Linux mac80211 stack. The driver is known to work with a number of RTL8723AU, @@ -27,7 +27,7 @@ config RTL8XXXU config RTL8XXXU_UNTESTED bool "Include support for untested Realtek 8xxx USB devices (EXPERIMENTAL)" depends on RTL8XXXU - ---help--- + help This option enables detection of Realtek 8723/8188/8191/8192 WiFi USB devices which have not been tested directly by the driver author or reported to be working by third parties. diff --git a/drivers/net/wireless/realtek/rtlwifi/Kconfig b/drivers/net/wireless/realtek/rtlwifi/Kconfig index 28c247f7f6f8..9f6a4e35543c 100644 --- a/drivers/net/wireless/realtek/rtlwifi/Kconfig +++ b/drivers/net/wireless/realtek/rtlwifi/Kconfig @@ -3,7 +3,7 @@ menuconfig RTL_CARDS tristate "Realtek rtlwifi family of devices" depends on MAC80211 && (PCI || USB) default y - ---help--- + help This option will enable support for the Realtek mac80211-based wireless drivers. Drivers rtl8192ce, rtl8192cu, rtl8192se, rtl8192de, rtl8723ae, rtl8723be, rtl8188ee, rtl8192ee, and rtl8821ae share @@ -17,7 +17,7 @@ config RTL8192CE select RTL8192C_COMMON select RTLWIFI select RTLWIFI_PCI - ---help--- + help This is the driver for Realtek RTL8192CE/RTL8188CE 802.11n PCIe wireless network adapters. @@ -28,7 +28,7 @@ config RTL8192SE depends on PCI select RTLWIFI select RTLWIFI_PCI - ---help--- + help This is the driver for Realtek RTL8192SE/RTL8191SE 802.11n PCIe wireless network adapters. @@ -39,7 +39,7 @@ config RTL8192DE depends on PCI select RTLWIFI select RTLWIFI_PCI - ---help--- + help This is the driver for Realtek RTL8192DE/RTL8188DE 802.11n PCIe wireless network adapters. @@ -52,7 +52,7 @@ config RTL8723AE select RTLWIFI_PCI select RTL8723_COMMON select RTLBTCOEXIST - ---help--- + help This is the driver for Realtek RTL8723AE 802.11n PCIe wireless network adapters. @@ -65,7 +65,7 @@ config RTL8723BE select RTLWIFI_PCI select RTL8723_COMMON select RTLBTCOEXIST - ---help--- + help This is the driver for Realtek RTL8723BE 802.11n PCIe wireless network adapters. @@ -76,7 +76,7 @@ config RTL8188EE depends on PCI select RTLWIFI select RTLWIFI_PCI - ---help--- + help This is the driver for Realtek RTL8188EE 802.11n PCIe wireless network adapters. @@ -88,7 +88,7 @@ config RTL8192EE select RTLWIFI select RTLWIFI_PCI select RTLBTCOEXIST - ---help--- + help This is the driver for Realtek RTL8192EE 802.11n PCIe wireless network adapters. @@ -100,7 +100,7 @@ config RTL8821AE select RTLWIFI select RTLWIFI_PCI select RTLBTCOEXIST - ---help--- + help This is the driver for Realtek RTL8821AE/RTL8812AE 802.11ac PCIe wireless network adapters. @@ -112,7 +112,7 @@ config RTL8192CU select RTLWIFI select RTLWIFI_USB select RTL8192C_COMMON - ---help--- + help This is the driver for Realtek RTL8192CU/RTL8188CU 802.11n USB wireless network adapters. @@ -132,7 +132,7 @@ config RTLWIFI_DEBUG bool "Debugging output for rtlwifi driver family" depends on RTLWIFI default y - ---help--- + help To use the module option that sets the dynamic-debugging level for, the front-end driver, this parameter must be "Y". For memory-limited systems, choose "N". If in doubt, choose "Y". diff --git a/drivers/net/wireless/rsi/Kconfig b/drivers/net/wireless/rsi/Kconfig index ad5d34350cf9..09a592409204 100644 --- a/drivers/net/wireless/rsi/Kconfig +++ b/drivers/net/wireless/rsi/Kconfig @@ -2,7 +2,7 @@ config WLAN_VENDOR_RSI bool "Redpine Signals Inc devices" default y - ---help--- + help If you have a wireless card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -16,7 +16,7 @@ config RSI_91X tristate "Redpine Signals Inc 91x WLAN driver support" select BT_HCIRSI if RSI_COEX depends on MAC80211 - ---help--- + help This option enabes support for RSI 1x1 devices. Select M (recommended), if you have a RSI 1x1 wireless module. @@ -24,7 +24,7 @@ config RSI_DEBUGFS bool "Redpine Signals Inc debug support" depends on RSI_91X default y - ---help--- + help Say Y, if you would like to enable debug support. This option creates debugfs entries @@ -32,7 +32,7 @@ config RSI_SDIO tristate "Redpine Signals SDIO bus support" depends on MMC && RSI_91X default m - ---help--- + help This option enables the SDIO bus support in rsi drivers. Select M (recommended), if you have a RSI 1x1 wireless module. @@ -40,7 +40,7 @@ config RSI_USB tristate "Redpine Signals USB bus support" depends on USB && RSI_91X default m - ---help--- + help This option enables the USB bus support in rsi drivers. Select M (recommended), if you have a RSI 1x1 wireless module. @@ -49,7 +49,7 @@ config RSI_COEX depends on BT && RSI_91X depends on !(BT=m && RSI_91X=y) default y - ---help--- + help This option enables the WLAN BT coex support in rsi drivers. Select M (recommended), if you have want to use this feature and you have RS9113 module. diff --git a/drivers/net/wireless/st/Kconfig b/drivers/net/wireless/st/Kconfig index 441d1b8e7b80..cd647a533d0e 100644 --- a/drivers/net/wireless/st/Kconfig +++ b/drivers/net/wireless/st/Kconfig @@ -2,7 +2,7 @@ config WLAN_VENDOR_ST bool "STMicroelectronics devices" default y - ---help--- + help If you have a wireless card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the diff --git a/drivers/net/wireless/ti/Kconfig b/drivers/net/wireless/ti/Kconfig index b81f2e41a63a..7c0b17a76fe2 100644 --- a/drivers/net/wireless/ti/Kconfig +++ b/drivers/net/wireless/ti/Kconfig @@ -2,7 +2,7 @@ config WLAN_VENDOR_TI bool "Texas Instrument devices" default y - ---help--- + help If you have a wireless card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -22,7 +22,7 @@ config WILINK_PLATFORM_DATA bool "TI WiLink platform data" depends on WLCORE_SDIO || WL1251_SDIO default y - ---help--- + help Small platform data bit needed to pass data to the sdio modules. diff --git a/drivers/net/wireless/ti/wl1251/Kconfig b/drivers/net/wireless/ti/wl1251/Kconfig index 7d39f0a4ba5b..de1c70e10cda 100644 --- a/drivers/net/wireless/ti/wl1251/Kconfig +++ b/drivers/net/wireless/ti/wl1251/Kconfig @@ -4,7 +4,7 @@ config WL1251 depends on MAC80211 select FW_LOADER select CRC7 - ---help--- + help This will enable TI wl1251 driver support. The drivers make use of the mac80211 stack. @@ -14,7 +14,7 @@ config WL1251 config WL1251_SPI tristate "TI wl1251 SPI support" depends on WL1251 && SPI_MASTER - ---help--- + help This module adds support for the SPI interface of adapters using TI wl1251 chipset. Select this if your platform is using the SPI bus. @@ -25,7 +25,7 @@ config WL1251_SPI config WL1251_SDIO tristate "TI wl1251 SDIO support" depends on WL1251 && MMC - ---help--- + help This module adds support for the SDIO interface of adapters using TI wl1251 chipset. Select this if your platform is using the SDIO bus. diff --git a/drivers/net/wireless/ti/wl12xx/Kconfig b/drivers/net/wireless/ti/wl12xx/Kconfig index 9c4511604b67..786fff288505 100644 --- a/drivers/net/wireless/ti/wl12xx/Kconfig +++ b/drivers/net/wireless/ti/wl12xx/Kconfig @@ -3,7 +3,7 @@ config WL12XX tristate "TI wl12xx support" depends on MAC80211 select WLCORE - ---help--- + help This module adds support for wireless adapters based on TI wl1271, wl1273, wl1281 and wl1283 chipsets. This module does *not* include support for wl1251. For wl1251 support, use the separate homonymous diff --git a/drivers/net/wireless/ti/wl18xx/Kconfig b/drivers/net/wireless/ti/wl18xx/Kconfig index e29aa2a3ba8a..98fe188dfb41 100644 --- a/drivers/net/wireless/ti/wl18xx/Kconfig +++ b/drivers/net/wireless/ti/wl18xx/Kconfig @@ -3,6 +3,6 @@ config WL18XX tristate "TI wl18xx support" depends on MAC80211 select WLCORE - ---help--- + help This module adds support for wireless adapters based on TI WiLink 8 chipsets. diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig index a9db1288221c..8094323256fb 100644 --- a/drivers/net/wireless/ti/wlcore/Kconfig +++ b/drivers/net/wireless/ti/wlcore/Kconfig @@ -3,7 +3,7 @@ config WLCORE tristate "TI wlcore support" depends on MAC80211 select FW_LOADER - ---help--- + help This module contains the main code for TI WLAN chips. It abstracts hardware-specific differences among different chipset families. Each chipset family needs to implement its own lower-level module @@ -16,7 +16,7 @@ config WLCORE_SPI tristate "TI wlcore SPI support" depends on WLCORE && SPI_MASTER && OF select CRC7 - ---help--- + help This module adds support for the SPI interface of adapters using TI WLAN chipsets. Select this if your platform is using the SPI bus. @@ -27,7 +27,7 @@ config WLCORE_SPI config WLCORE_SDIO tristate "TI wlcore SDIO support" depends on WLCORE && MMC - ---help--- + help This module adds support for the SDIO interface of adapters using TI WLAN chipsets. Select this if your platform is using the SDIO bus. diff --git a/drivers/net/wireless/zydas/Kconfig b/drivers/net/wireless/zydas/Kconfig index 78a45cc4c014..08574433df66 100644 --- a/drivers/net/wireless/zydas/Kconfig +++ b/drivers/net/wireless/zydas/Kconfig @@ -2,7 +2,7 @@ config WLAN_VENDOR_ZYDAS bool "ZyDAS devices" default y - ---help--- + help If you have a wireless card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -18,7 +18,7 @@ config USB_ZD1201 select WIRELESS_EXT select WEXT_PRIV select FW_LOADER - ---help--- + help Say Y if you want to use wireless LAN adapters based on the ZyDAS ZD1201 chip. diff --git a/drivers/net/wireless/zydas/zd1211rw/Kconfig b/drivers/net/wireless/zydas/zd1211rw/Kconfig index 0b7f1810f6e2..f9da8c0685d4 100644 --- a/drivers/net/wireless/zydas/zd1211rw/Kconfig +++ b/drivers/net/wireless/zydas/zd1211rw/Kconfig @@ -3,7 +3,7 @@ config ZD1211RW tristate "ZyDAS ZD1211/ZD1211B USB-wireless support" depends on USB && MAC80211 select FW_LOADER - ---help--- + help This is a driver for the ZyDAS ZD1211/ZD1211B wireless chip, present in many USB-wireless adapters. @@ -13,7 +13,7 @@ config ZD1211RW config ZD1211RW_DEBUG bool "ZyDAS ZD1211 debugging" depends on ZD1211RW - ---help--- + help ZD1211 debugging messages. Choosing Y will result in additional debug messages being saved to your kernel logs, which may help debug any problems. |