rsi: new bootup parameters for 9116

Bootup parameters are different for 9116 device. Check added for device
model where-ever bootup parameters are being send.

Signed-off-by: Siva Rebbagondla <siva8118@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 63 insertions, 0 deletions

diff --git a/drivers/net/wireless/rsi/rsi_boot_params.h b/drivers/net/wireless/rsi/rsi_boot_params.h
index ad903b22440e..c1cf19d1e376 100644
--- a/drivers/net/wireless/rsi/rsi_boot_params.h
+++ b/drivers/net/wireless/rsi/rsi_boot_params.h
@@ -80,6 +80,15 @@ struct pll_config {
 	struct afepll_info afepll_info_g;
 } __packed;
 
+struct pll_config_9116 {
+	__le16 pll_ctrl_set_reg;
+	__le16 pll_ctrl_clr_reg;
+	__le16 pll_modem_conig_reg;
+	__le16 soc_clk_config_reg;
+	__le16 adc_dac_strm1_config_reg;
+	__le16 adc_dac_strm2_config_reg;
+} __packed;
+
 /* structure to store configs related to UMAC clk programming */
 struct switch_clk {
 	__le16 switch_clk_info;
@@ -93,11 +102,32 @@ struct switch_clk {
 	__le16 qspi_uart_clock_reg_config;
 } __packed;
 
+#define RSI_SWITCH_TASS_CLK			BIT(0)
+#define RSI_SWITCH_QSPI_CLK			BIT(1)
+#define RSI_SWITCH_SLP_CLK_2_32			BIT(2)
+#define RSI_SWITCH_WLAN_BBP_LMAC_CLK_REG	BIT(3)
+#define RSI_SWITCH_ZBBT_BBP_LMAC_CLK_REG	BIT(4)
+#define RSI_SWITCH_BBP_LMAC_CLK_REG		BIT(5)
+#define RSI_MODEM_CLK_160MHZ			BIT(6)
+
+struct switch_clk_9116 {
+	__le32 switch_clk_info;
+	__le32 tass_clock_reg;
+	__le32 wlan_bbp_lmac_clk_reg_val;
+	__le32 zbbt_bbp_lmac_clk_reg_val;
+	__le32 bbp_lmac_clk_en_val;
+} __packed;
+
 struct device_clk_info {
 	struct pll_config pll_config_g;
 	struct switch_clk switch_clk_g;
 } __packed;
 
+struct device_clk_info_9116 {
+	struct pll_config_9116 pll_config_9116_g;
+	struct switch_clk_9116 switch_clk_9116_g;
+} __packed;
+
 struct bootup_params {
 	__le16 magic_number;
 	__le16 crystal_good_time;
@@ -127,4 +157,37 @@ struct bootup_params {
 	__le32 max_threshold_to_avoid_sleep;
 	u8 beacon_resedue_alg_en;
 } __packed;
+
+struct bootup_params_9116 {
+	__le16 magic_number;
+#define LOADED_TOKEN  0x5AA5   /* Bootup params are installed by host
+				* or OTP/FLASH (Bootloader)
+				*/
+#define ROM_TOKEN     0x55AA   /* Bootup params are taken from ROM
+				* itself in MCU mode.
+				*/
+	__le16 crystal_good_time;
+	__le32 valid;
+	__le32 reserved_for_valids;
+	__le16 bootup_mode_info;
+#define BT_COEXIST		BIT(0)
+#define BOOTUP_MODE		(BIT(2) | BIT(1))
+#define CUR_DEV_MODE_9116	(bootup_params_9116.bootup_mode_info >> 1)
+	__le16 digital_loop_back_params;
+	__le16 rtls_timestamp_en;
+	__le16 host_spi_intr_cfg;
+	struct device_clk_info_9116 device_clk_info_9116[1];
+	__le32 buckboost_wakeup_cnt;
+	__le16 pmu_wakeup_wait;
+	u8 shutdown_wait_time;
+	u8 pmu_slp_clkout_sel;
+	__le32 wdt_prog_value;
+	__le32 wdt_soc_rst_delay;
+	__le32 dcdc_operation_mode;
+	__le32 soc_reset_wait_cnt;
+	__le32 waiting_time_at_fresh_sleep;
+	__le32 max_threshold_to_avoid_sleep;
+	u8 beacon_resedue_alg_en;
+} __packed;
+
 #endif