wireless: mwifiex: initial commit for Marvell mwifiex driver

This driver adds WiFi support for Marvell 802.11n based chipsets
with SDIO interface. Currently only SD8787 is supported. More
chipsets will be supported later.

drivers/net/wireless/mwifiex/

Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Marc Yang <yangyang@marvell.com>
Signed-off-by: Ramesh Radhakrishnan <rramesh@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 305 insertions, 0 deletions

diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h
new file mode 100644
index 000000000000..a0e9bc5253e0
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/sdio.h
@@ -0,0 +1,305 @@
+/*
+ * Marvell Wireless LAN device driver: SDIO specific definitions
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#ifndef	_MWIFIEX_SDIO_H
+#define	_MWIFIEX_SDIO_H
+
+
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/card.h>
+
+#include "main.h"
+
+#define BLOCK_MODE	1
+#define BYTE_MODE	0
+
+#define REG_PORT			0
+#define RD_BITMAP_L			0x04
+#define RD_BITMAP_U			0x05
+#define WR_BITMAP_L			0x06
+#define WR_BITMAP_U			0x07
+#define RD_LEN_P0_L			0x08
+#define RD_LEN_P0_U			0x09
+
+#define MWIFIEX_SDIO_IO_PORT_MASK		0xfffff
+
+#define MWIFIEX_SDIO_BYTE_MODE_MASK	0x80000000
+
+#define CTRL_PORT			0
+#define CTRL_PORT_MASK			0x0001
+#define DATA_PORT_MASK			0xfffe
+
+#define MAX_MP_REGS			64
+#define MAX_PORT			16
+
+#define SDIO_MP_AGGR_DEF_PKT_LIMIT	8
+
+#define SDIO_MP_TX_AGGR_DEF_BUF_SIZE        (4096)	/* 4K */
+
+/* Multi port RX aggregation buffer size */
+#define SDIO_MP_RX_AGGR_DEF_BUF_SIZE        (4096)	/* 4K */
+
+/* Misc. Config Register : Auto Re-enable interrupts */
+#define AUTO_RE_ENABLE_INT              BIT(4)
+
+/* Host Control Registers */
+/* Host Control Registers : I/O port 0 */
+#define IO_PORT_0_REG			0x78
+/* Host Control Registers : I/O port 1 */
+#define IO_PORT_1_REG			0x79
+/* Host Control Registers : I/O port 2 */
+#define IO_PORT_2_REG			0x7A
+
+/* Host Control Registers : Configuration */
+#define CONFIGURATION_REG		0x00
+/* Host Control Registers : Host without Command 53 finish host*/
+#define HOST_TO_CARD_EVENT       (0x1U << 3)
+/* Host Control Registers : Host without Command 53 finish host */
+#define HOST_WO_CMD53_FINISH_HOST	(0x1U << 2)
+/* Host Control Registers : Host power up */
+#define HOST_POWER_UP			(0x1U << 1)
+/* Host Control Registers : Host power down */
+#define HOST_POWER_DOWN			(0x1U << 0)
+
+/* Host Control Registers : Host interrupt mask */
+#define HOST_INT_MASK_REG		0x02
+/* Host Control Registers : Upload host interrupt mask */
+#define UP_LD_HOST_INT_MASK		(0x1U)
+/* Host Control Registers : Download host interrupt mask */
+#define DN_LD_HOST_INT_MASK		(0x2U)
+/* Enable Host interrupt mask */
+#define HOST_INT_ENABLE	(UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK)
+/* Disable Host interrupt mask */
+#define	HOST_INT_DISABLE		0xff
+
+/* Host Control Registers : Host interrupt status */
+#define HOST_INTSTATUS_REG		0x03
+/* Host Control Registers : Upload host interrupt status */
+#define UP_LD_HOST_INT_STATUS		(0x1U)
+/* Host Control Registers : Download host interrupt status */
+#define DN_LD_HOST_INT_STATUS		(0x2U)
+
+/* Host Control Registers : Host interrupt RSR */
+#define HOST_INT_RSR_REG		0x01
+/* Host Control Registers : Upload host interrupt RSR */
+#define UP_LD_HOST_INT_RSR		(0x1U)
+#define SDIO_INT_MASK			0x3F
+
+/* Host Control Registers : Host interrupt status */
+#define HOST_INT_STATUS_REG		0x28
+/* Host Control Registers : Upload CRC error */
+#define UP_LD_CRC_ERR			(0x1U << 2)
+/* Host Control Registers : Upload restart */
+#define UP_LD_RESTART                   (0x1U << 1)
+/* Host Control Registers : Download restart */
+#define DN_LD_RESTART                   (0x1U << 0)
+
+/* Card Control Registers : Card status register */
+#define CARD_STATUS_REG                 0x30
+/* Card Control Registers : Card I/O ready */
+#define CARD_IO_READY                   (0x1U << 3)
+/* Card Control Registers : CIS card ready */
+#define CIS_CARD_RDY                    (0x1U << 2)
+/* Card Control Registers : Upload card ready */
+#define UP_LD_CARD_RDY                  (0x1U << 1)
+/* Card Control Registers : Download card ready */
+#define DN_LD_CARD_RDY                  (0x1U << 0)
+
+/* Card Control Registers : Host interrupt mask register */
+#define HOST_INTERRUPT_MASK_REG         0x34
+/* Card Control Registers : Host power interrupt mask */
+#define HOST_POWER_INT_MASK             (0x1U << 3)
+/* Card Control Registers : Abort card interrupt mask */
+#define ABORT_CARD_INT_MASK             (0x1U << 2)
+/* Card Control Registers : Upload card interrupt mask */
+#define UP_LD_CARD_INT_MASK             (0x1U << 1)
+/* Card Control Registers : Download card interrupt mask */
+#define DN_LD_CARD_INT_MASK             (0x1U << 0)
+
+/* Card Control Registers : Card interrupt status register */
+#define CARD_INTERRUPT_STATUS_REG       0x38
+/* Card Control Registers : Power up interrupt */
+#define POWER_UP_INT                    (0x1U << 4)
+/* Card Control Registers : Power down interrupt */
+#define POWER_DOWN_INT                  (0x1U << 3)
+
+/* Card Control Registers : Card interrupt RSR register */
+#define CARD_INTERRUPT_RSR_REG          0x3c
+/* Card Control Registers : Power up RSR */
+#define POWER_UP_RSR                    (0x1U << 4)
+/* Card Control Registers : Power down RSR */
+#define POWER_DOWN_RSR                  (0x1U << 3)
+
+/* Card Control Registers : Miscellaneous Configuration Register */
+#define CARD_MISC_CFG_REG               0x6C
+
+/* Host F1 read base 0 */
+#define HOST_F1_RD_BASE_0		0x0040
+/* Host F1 read base 1 */
+#define HOST_F1_RD_BASE_1		0x0041
+/* Host F1 card ready */
+#define HOST_F1_CARD_RDY		0x0020
+
+/* Firmware status 0 register */
+#define CARD_FW_STATUS0_REG		0x60
+/* Firmware status 1 register */
+#define CARD_FW_STATUS1_REG		0x61
+/* Rx length register */
+#define CARD_RX_LEN_REG			0x62
+/* Rx unit register */
+#define CARD_RX_UNIT_REG		0x63
+
+/* Event header Len*/
+#define MWIFIEX_EVENT_HEADER_LEN           8
+
+/* Max retry number of CMD53 write */
+#define MAX_WRITE_IOMEM_RETRY		2
+
+/* SDIO Tx aggregation in progress ? */
+#define MP_TX_AGGR_IN_PROGRESS(a) (a->mpa_tx.pkt_cnt > 0)
+
+/* SDIO Tx aggregation buffer room for next packet ? */
+#define MP_TX_AGGR_BUF_HAS_ROOM(a, len) ((a->mpa_tx.buf_len+len)	\
+						<= a->mpa_tx.buf_size)
+
+/* Copy current packet (SDIO Tx aggregation buffer) to SDIO buffer */
+#define MP_TX_AGGR_BUF_PUT(a, payload, pkt_len, port) do {		\
+	memmove(&a->mpa_tx.buf[a->mpa_tx.buf_len],			\
+			payload, pkt_len);				\
+	a->mpa_tx.buf_len += pkt_len;					\
+	if (!a->mpa_tx.pkt_cnt)						\
+		a->mpa_tx.start_port = port;				\
+	if (a->mpa_tx.start_port <= port)				\
+		a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt));		\
+	else								\
+		a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+(MAX_PORT -	\
+						a->mp_end_port)));	\
+	a->mpa_tx.pkt_cnt++;						\
+} while (0);
+
+/* SDIO Tx aggregation limit ? */
+#define MP_TX_AGGR_PKT_LIMIT_REACHED(a)					\
+			(a->mpa_tx.pkt_cnt == a->mpa_tx.pkt_aggr_limit)
+
+/* SDIO Tx aggregation port limit ? */
+#define MP_TX_AGGR_PORT_LIMIT_REACHED(a) ((a->curr_wr_port <		\
+			a->mpa_tx.start_port) && (((MAX_PORT -		\
+			a->mpa_tx.start_port) + a->curr_wr_port) >=	\
+				SDIO_MP_AGGR_DEF_PKT_LIMIT))
+
+/* Reset SDIO Tx aggregation buffer parameters */
+#define MP_TX_AGGR_BUF_RESET(a) do {					\
+	a->mpa_tx.pkt_cnt = 0;						\
+	a->mpa_tx.buf_len = 0;						\
+	a->mpa_tx.ports = 0;						\
+	a->mpa_tx.start_port = 0;					\
+} while (0);
+
+/* SDIO Rx aggregation limit ? */
+#define MP_RX_AGGR_PKT_LIMIT_REACHED(a)					\
+			(a->mpa_rx.pkt_cnt == a->mpa_rx.pkt_aggr_limit)
+
+/* SDIO Tx aggregation port limit ? */
+#define MP_RX_AGGR_PORT_LIMIT_REACHED(a) ((a->curr_rd_port <		\
+			a->mpa_rx.start_port) && (((MAX_PORT -		\
+			a->mpa_rx.start_port) + a->curr_rd_port) >=	\
+			SDIO_MP_AGGR_DEF_PKT_LIMIT))
+
+/* SDIO Rx aggregation in progress ? */
+#define MP_RX_AGGR_IN_PROGRESS(a) (a->mpa_rx.pkt_cnt > 0)
+
+/* SDIO Rx aggregation buffer room for next packet ? */
+#define MP_RX_AGGR_BUF_HAS_ROOM(a, rx_len)				\
+			((a->mpa_rx.buf_len+rx_len) <= a->mpa_rx.buf_size)
+
+/* Prepare to copy current packet from card to SDIO Rx aggregation buffer */
+#define MP_RX_AGGR_SETUP(a, skb, port) do {				\
+	a->mpa_rx.buf_len += skb->len;					\
+	if (!a->mpa_rx.pkt_cnt)						\
+		a->mpa_rx.start_port = port;				\
+	if (a->mpa_rx.start_port <= port)				\
+		a->mpa_rx.ports |= (1<<(a->mpa_rx.pkt_cnt));		\
+	else								\
+		a->mpa_rx.ports |= (1<<(a->mpa_rx.pkt_cnt+1));		\
+	a->mpa_rx.skb_arr[a->mpa_rx.pkt_cnt] = skb;			\
+	a->mpa_rx.len_arr[a->mpa_rx.pkt_cnt] = skb->len;		\
+	a->mpa_rx.pkt_cnt++;						\
+} while (0);
+
+/* Reset SDIO Rx aggregation buffer parameters */
+#define MP_RX_AGGR_BUF_RESET(a) do {					\
+	a->mpa_rx.pkt_cnt = 0;						\
+	a->mpa_rx.buf_len = 0;						\
+	a->mpa_rx.ports = 0;						\
+	a->mpa_rx.start_port = 0;					\
+} while (0);
+
+
+/* data structure for SDIO MPA TX */
+struct mwifiex_sdio_mpa_tx {
+	/* multiport tx aggregation buffer pointer */
+	u8 *buf;
+	u32 buf_len;
+	u32 pkt_cnt;
+	u16 ports;
+	u16 start_port;
+	u8 enabled;
+	u32 buf_size;
+	u32 pkt_aggr_limit;
+};
+
+struct mwifiex_sdio_mpa_rx {
+	u8 *buf;
+	u32 buf_len;
+	u32 pkt_cnt;
+	u16 ports;
+	u16 start_port;
+
+	struct sk_buff *skb_arr[SDIO_MP_AGGR_DEF_PKT_LIMIT];
+	u32 len_arr[SDIO_MP_AGGR_DEF_PKT_LIMIT];
+
+	u8 enabled;
+	u32 buf_size;
+	u32 pkt_aggr_limit;
+};
+
+int mwifiex_bus_register(void);
+void mwifiex_bus_unregister(void);
+
+struct sdio_mmc_card {
+	struct sdio_func *func;
+	struct mwifiex_adapter *adapter;
+
+	u16 mp_rd_bitmap;
+	u16 mp_wr_bitmap;
+
+	u16 mp_end_port;
+	u16 mp_data_port_mask;
+
+	u8 curr_rd_port;
+	u8 curr_wr_port;
+
+	u8 *mp_regs;
+
+	struct mwifiex_sdio_mpa_tx mpa_tx;
+	struct mwifiex_sdio_mpa_rx mpa_rx;
+};
+#endif /* _MWIFIEX_SDIO_H */