iwlwifi: more clean up to move agn only rx functions from iwlcore to iwlagn

Move more functions only used by agn driver from iwlcore to iwlagn.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>

1 files changed, 0 insertions, 411 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 45230c6a7899..3a4313841fe7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -489,139 +489,6 @@ void iwl_reply_statistics(struct iwl_priv *priv,
 }
 EXPORT_SYMBOL(iwl_reply_statistics);
 
-/* Calc max signal level (dBm) among 3 possible receivers */
-static inline int iwl_calc_rssi(struct iwl_priv *priv,
-				struct iwl_rx_phy_res *rx_resp)
-{
-	return priv->cfg->ops->utils->calc_rssi(priv, rx_resp);
-}
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-/**
- * iwl_dbg_report_frame - dump frame to syslog during debug sessions
- *
- * You may hack this function to show different aspects of received frames,
- * including selective frame dumps.
- * group100 parameter selects whether to show 1 out of 100 good data frames.
- *    All beacon and probe response frames are printed.
- */
-static void iwl_dbg_report_frame(struct iwl_priv *priv,
-		      struct iwl_rx_phy_res *phy_res, u16 length,
-		      struct ieee80211_hdr *header, int group100)
-{
-	u32 to_us;
-	u32 print_summary = 0;
-	u32 print_dump = 0;	/* set to 1 to dump all frames' contents */
-	u32 hundred = 0;
-	u32 dataframe = 0;
-	__le16 fc;
-	u16 seq_ctl;
-	u16 channel;
-	u16 phy_flags;
-	u32 rate_n_flags;
-	u32 tsf_low;
-	int rssi;
-
-	if (likely(!(iwl_get_debug_level(priv) & IWL_DL_RX)))
-		return;
-
-	/* MAC header */
-	fc = header->frame_control;
-	seq_ctl = le16_to_cpu(header->seq_ctrl);
-
-	/* metadata */
-	channel = le16_to_cpu(phy_res->channel);
-	phy_flags = le16_to_cpu(phy_res->phy_flags);
-	rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);
-
-	/* signal statistics */
-	rssi = iwl_calc_rssi(priv, phy_res);
-	tsf_low = le64_to_cpu(phy_res->timestamp) & 0x0ffffffff;
-
-	to_us = !compare_ether_addr(header->addr1, priv->mac_addr);
-
-	/* if data frame is to us and all is good,
-	 *   (optionally) print summary for only 1 out of every 100 */
-	if (to_us && (fc & ~cpu_to_le16(IEEE80211_FCTL_PROTECTED)) ==
-	    cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) {
-		dataframe = 1;
-		if (!group100)
-			print_summary = 1;	/* print each frame */
-		else if (priv->framecnt_to_us < 100) {
-			priv->framecnt_to_us++;
-			print_summary = 0;
-		} else {
-			priv->framecnt_to_us = 0;
-			print_summary = 1;
-			hundred = 1;
-		}
-	} else {
-		/* print summary for all other frames */
-		print_summary = 1;
-	}
-
-	if (print_summary) {
-		char *title;
-		int rate_idx;
-		u32 bitrate;
-
-		if (hundred)
-			title = "100Frames";
-		else if (ieee80211_has_retry(fc))
-			title = "Retry";
-		else if (ieee80211_is_assoc_resp(fc))
-			title = "AscRsp";
-		else if (ieee80211_is_reassoc_resp(fc))
-			title = "RasRsp";
-		else if (ieee80211_is_probe_resp(fc)) {
-			title = "PrbRsp";
-			print_dump = 1;	/* dump frame contents */
-		} else if (ieee80211_is_beacon(fc)) {
-			title = "Beacon";
-			print_dump = 1;	/* dump frame contents */
-		} else if (ieee80211_is_atim(fc))
-			title = "ATIM";
-		else if (ieee80211_is_auth(fc))
-			title = "Auth";
-		else if (ieee80211_is_deauth(fc))
-			title = "DeAuth";
-		else if (ieee80211_is_disassoc(fc))
-			title = "DisAssoc";
-		else
-			title = "Frame";
-
-		rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags);
-		if (unlikely((rate_idx < 0) || (rate_idx >= IWL_RATE_COUNT))) {
-			bitrate = 0;
-			WARN_ON_ONCE(1);
-		} else {
-			bitrate = iwl_rates[rate_idx].ieee / 2;
-		}
-
-		/* print frame summary.
-		 * MAC addresses show just the last byte (for brevity),
-		 *    but you can hack it to show more, if you'd like to. */
-		if (dataframe)
-			IWL_DEBUG_RX(priv, "%s: mhd=0x%04x, dst=0x%02x, "
-				     "len=%u, rssi=%d, chnl=%d, rate=%u, \n",
-				     title, le16_to_cpu(fc), header->addr1[5],
-				     length, rssi, channel, bitrate);
-		else {
-			/* src/dst addresses assume managed mode */
-			IWL_DEBUG_RX(priv, "%s: 0x%04x, dst=0x%02x, src=0x%02x, "
-				     "len=%u, rssi=%d, tim=%lu usec, "
-				     "phy=0x%02x, chnl=%d\n",
-				     title, le16_to_cpu(fc), header->addr1[5],
-				     header->addr3[5], length, rssi,
-				     tsf_low - priv->scan_start_tsf,
-				     phy_flags, channel);
-		}
-	}
-	if (print_dump)
-		iwl_print_hex_dump(priv, IWL_DL_RX, header, length);
-}
-#endif
-
 /*
  * returns non-zero if packet should be dropped
  */
@@ -669,281 +536,3 @@ int iwl_set_decrypted_flag(struct iwl_priv *priv,
 	return 0;
 }
 EXPORT_SYMBOL(iwl_set_decrypted_flag);
-
-static u32 iwl_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in)
-{
-	u32 decrypt_out = 0;
-
-	if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) ==
-					RX_RES_STATUS_STATION_FOUND)
-		decrypt_out |= (RX_RES_STATUS_STATION_FOUND |
-				RX_RES_STATUS_NO_STATION_INFO_MISMATCH);
-
-	decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK);
-
-	/* packet was not encrypted */
-	if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
-					RX_RES_STATUS_SEC_TYPE_NONE)
-		return decrypt_out;
-
-	/* packet was encrypted with unknown alg */
-	if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
-					RX_RES_STATUS_SEC_TYPE_ERR)
-		return decrypt_out;
-
-	/* decryption was not done in HW */
-	if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) !=
-					RX_MPDU_RES_STATUS_DEC_DONE_MSK)
-		return decrypt_out;
-
-	switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) {
-
-	case RX_RES_STATUS_SEC_TYPE_CCMP:
-		/* alg is CCM: check MIC only */
-		if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK))
-			/* Bad MIC */
-			decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
-		else
-			decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
-
-		break;
-
-	case RX_RES_STATUS_SEC_TYPE_TKIP:
-		if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) {
-			/* Bad TTAK */
-			decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK;
-			break;
-		}
-		/* fall through if TTAK OK */
-	default:
-		if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK))
-			decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
-		else
-			decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
-		break;
-	};
-
-	IWL_DEBUG_RX(priv, "decrypt_in:0x%x  decrypt_out = 0x%x\n",
-					decrypt_in, decrypt_out);
-
-	return decrypt_out;
-}
-
-static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv,
-					struct ieee80211_hdr *hdr,
-					u16 len,
-					u32 ampdu_status,
-					struct iwl_rx_mem_buffer *rxb,
-					struct ieee80211_rx_status *stats)
-{
-	struct sk_buff *skb;
-	int ret = 0;
-	__le16 fc = hdr->frame_control;
-
-	/* We only process data packets if the interface is open */
-	if (unlikely(!priv->is_open)) {
-		IWL_DEBUG_DROP_LIMIT(priv,
-		    "Dropping packet while interface is not open.\n");
-		return;
-	}
-
-	/* In case of HW accelerated crypto and bad decryption, drop */
-	if (!priv->cfg->mod_params->sw_crypto &&
-	    iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats))
-		return;
-
-	skb = alloc_skb(IWL_LINK_HDR_MAX * 2, GFP_ATOMIC);
-	if (!skb) {
-		IWL_ERR(priv, "alloc_skb failed\n");
-		return;
-	}
-
-	skb_reserve(skb, IWL_LINK_HDR_MAX);
-	skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len);
-
-	/* mac80211 currently doesn't support paged SKB. Convert it to
-	 * linear SKB for management frame and data frame requires
-	 * software decryption or software defragementation. */
-	if (ieee80211_is_mgmt(fc) ||
-	    ieee80211_has_protected(fc) ||
-	    ieee80211_has_morefrags(fc) ||
-	    le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG ||
-	    (ieee80211_is_data_qos(fc) &&
-	     *ieee80211_get_qos_ctl(hdr) &
-	     IEEE80211_QOS_CONTROL_A_MSDU_PRESENT))
-		ret = skb_linearize(skb);
-	else
-		ret = __pskb_pull_tail(skb, min_t(u16, IWL_LINK_HDR_MAX, len)) ?
-			 0 : -ENOMEM;
-
-	if (ret) {
-		kfree_skb(skb);
-		goto out;
-	}
-
-	/*
-	 * XXX: We cannot touch the page and its virtual memory (hdr) after
-	 * here. It might have already been freed by the above skb change.
-	 */
-
-	iwl_update_stats(priv, false, fc, len);
-	memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
-
-	ieee80211_rx(priv->hw, skb);
- out:
-	priv->alloc_rxb_page--;
-	rxb->page = NULL;
-}
-
-/* Called for REPLY_RX (legacy ABG frames), or
- * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */
-void iwl_rx_reply_rx(struct iwl_priv *priv,
-				struct iwl_rx_mem_buffer *rxb)
-{
-	struct ieee80211_hdr *header;
-	struct ieee80211_rx_status rx_status;
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	struct iwl_rx_phy_res *phy_res;
-	__le32 rx_pkt_status;
-	struct iwl4965_rx_mpdu_res_start *amsdu;
-	u32 len;
-	u32 ampdu_status;
-	u32 rate_n_flags;
-
-	/**
-	 * REPLY_RX and REPLY_RX_MPDU_CMD are handled differently.
-	 *	REPLY_RX: physical layer info is in this buffer
-	 *	REPLY_RX_MPDU_CMD: physical layer info was sent in separate
-	 *		command and cached in priv->last_phy_res
-	 *
-	 * Here we set up local variables depending on which command is
-	 * received.
-	 */
-	if (pkt->hdr.cmd == REPLY_RX) {
-		phy_res = (struct iwl_rx_phy_res *)pkt->u.raw;
-		header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res)
-				+ phy_res->cfg_phy_cnt);
-
-		len = le16_to_cpu(phy_res->byte_count);
-		rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*phy_res) +
-				phy_res->cfg_phy_cnt + len);
-		ampdu_status = le32_to_cpu(rx_pkt_status);
-	} else {
-		if (!priv->last_phy_res[0]) {
-			IWL_ERR(priv, "MPDU frame without cached PHY data\n");
-			return;
-		}
-		phy_res = (struct iwl_rx_phy_res *)&priv->last_phy_res[1];
-		amsdu = (struct iwl4965_rx_mpdu_res_start *)pkt->u.raw;
-		header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu));
-		len = le16_to_cpu(amsdu->byte_count);
-		rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*amsdu) + len);
-		ampdu_status = iwl_translate_rx_status(priv,
-				le32_to_cpu(rx_pkt_status));
-	}
-
-	if ((unlikely(phy_res->cfg_phy_cnt > 20))) {
-		IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
-				phy_res->cfg_phy_cnt);
-		return;
-	}
-
-	if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) ||
-	    !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
-		IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n",
-				le32_to_cpu(rx_pkt_status));
-		return;
-	}
-
-	/* This will be used in several places later */
-	rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);
-
-	/* rx_status carries information about the packet to mac80211 */
-	rx_status.mactime = le64_to_cpu(phy_res->timestamp);
-	rx_status.freq =
-		ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel));
-	rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
-				IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
-	rx_status.rate_idx =
-		iwl_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band);
-	rx_status.flag = 0;
-
-	/* TSF isn't reliable. In order to allow smooth user experience,
-	 * this W/A doesn't propagate it to the mac80211 */
-	/*rx_status.flag |= RX_FLAG_TSFT;*/
-
-	priv->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp);
-
-	/* Find max signal strength (dBm) among 3 antenna/receiver chains */
-	rx_status.signal = iwl_calc_rssi(priv, phy_res);
-
-	/* Meaningful noise values are available only from beacon statistics,
-	 *   which are gathered only when associated, and indicate noise
-	 *   only for the associated network channel ...
-	 * Ignore these noise values while scanning (other channels) */
-	if (iwl_is_associated(priv) &&
-	    !test_bit(STATUS_SCANNING, &priv->status)) {
-		rx_status.noise = priv->last_rx_noise;
-	} else {
-		rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
-	}
-
-	/* Reset beacon noise level if not associated. */
-	if (!iwl_is_associated(priv))
-		priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	/* Set "1" to report good data frames in groups of 100 */
-	if (unlikely(iwl_get_debug_level(priv) & IWL_DL_RX))
-		iwl_dbg_report_frame(priv, phy_res, len, header, 1);
-#endif
-	iwl_dbg_log_rx_data_frame(priv, len, header);
-	IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, TSF %llu\n",
-		rx_status.signal, rx_status.noise,
-		(unsigned long long)rx_status.mactime);
-
-	/*
-	 * "antenna number"
-	 *
-	 * It seems that the antenna field in the phy flags value
-	 * is actually a bit field. This is undefined by radiotap,
-	 * it wants an actual antenna number but I always get "7"
-	 * for most legacy frames I receive indicating that the
-	 * same frame was received on all three RX chains.
-	 *
-	 * I think this field should be removed in favor of a
-	 * new 802.11n radiotap field "RX chains" that is defined
-	 * as a bitmask.
-	 */
-	rx_status.antenna =
-		(le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK)
-		>> RX_RES_PHY_FLAGS_ANTENNA_POS;
-
-	/* set the preamble flag if appropriate */
-	if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
-		rx_status.flag |= RX_FLAG_SHORTPRE;
-
-	/* Set up the HT phy flags */
-	if (rate_n_flags & RATE_MCS_HT_MSK)
-		rx_status.flag |= RX_FLAG_HT;
-	if (rate_n_flags & RATE_MCS_HT40_MSK)
-		rx_status.flag |= RX_FLAG_40MHZ;
-	if (rate_n_flags & RATE_MCS_SGI_MSK)
-		rx_status.flag |= RX_FLAG_SHORT_GI;
-
-	iwl_pass_packet_to_mac80211(priv, header, len, ampdu_status,
-				    rxb, &rx_status);
-}
-EXPORT_SYMBOL(iwl_rx_reply_rx);
-
-/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD).
- * This will be used later in iwl_rx_reply_rx() for REPLY_RX_MPDU_CMD. */
-void iwl_rx_reply_rx_phy(struct iwl_priv *priv,
-				    struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	priv->last_phy_res[0] = 1;
-	memcpy(&priv->last_phy_res[1], &(pkt->u.raw[0]),
-	       sizeof(struct iwl_rx_phy_res));
-}
-EXPORT_SYMBOL(iwl_rx_reply_rx_phy);