Merge tag 'nand/for-4.19' of git://git.infradead.org/linux-mtd into mtd/next

Pull NAND updates from Miquel Raynal:

"
 NAND core changes:
 - Add the SPI-NAND framework.
 - Create a helper to find the best ECC configuration.
 - Create NAND controller operations.
 - Allocate dynamically ONFI parameters structure.
 - Add defines for ONFI version bits.
 - Add manufacturer fixup for ONFI parameter page.
 - Add an option to specify NAND chip as a boot device.
 - Add Reed-Solomon error correction algorithm.
 - Better name for the controller structure.
 - Remove unused caller_is_module() definition.
 - Make subop helpers return unsigned values.
 - Expose _notsupp() helpers for raw page accessors.
 - Add default values for dynamic timings.
 - Kill the chip->scan_bbt() hook.
 - Rename nand_default_bbt() into nand_create_bbt().
 - Start to clean the nand_chip structure.
 - Remove stale prototype from rawnand.h.

 Raw NAND controllers drivers changes:
 - Qcom: structuring cleanup.
 - Denali: use core helper to find the best ECC configuration.
 - Possible build of almost all drivers by adding a dependency on
   COMPILE_TEST for almost all of them in Kconfig, implies various
   fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even
   changes in sparc64 and ia64 architectures.
 - Clean the ->probe() functions error path of a lot of drivers.
 - Migrate all drivers to use nand_scan() instead of
   nand_scan_ident()/nand_scan_tail() pair.
 - Use mtd_device_register() where applicable to simplify the code.
 - Marvell:
   * Handle on-die ECC.
   * Better clocks handling.
   * Remove bogus comment.
   * Add suspend and resume support.
 - Tegra: add NAND controller driver.
 - Atmel:
   * Add module param to avoid using dma.
   * Drop Wenyou Yang from MAINTAINERS.
 - Denali: optimize timings handling.
 - FSMC: Stop using chip->read_buf().
 - FSL:
   * Switch to SPDX license tag identifiers.
   * Fix qualifiers in MXC init functions.

 Raw NAND chip drivers changes:
 - Micron:
   * Add fixup for ONFI revision.
   * Update ecc_stats.corrected.
   * Make ECC activation stateful.
   * Avoid enabling/disabling ECC when it can't be disabled.
   * Get the actual number of bitflips.
   * Allow forced on-die ECC.
   * Support 8/512 on-die ECC.
   * Fix on-die ECC detection logic.
 - Hynix:
   * Fix decoding the OOB size on H27UCG8T2BTR.
   * Use ->exec_op() in hynix_nand_reg_write_op().
"

3 files changed, 25 insertions, 5 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index cb5b0f58c395..edf20361ea5f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -111,7 +111,7 @@ config DWMAC_ROCKCHIP
 config DWMAC_SOCFPGA
 	tristate "SOCFPGA dwmac support"
 	default ARCH_SOCFPGA
-	depends on OF && (ARCH_SOCFPGA || COMPILE_TEST)
+	depends on OF && (ARCH_SOCFPGA || ARCH_STRATIX10 || COMPILE_TEST)
 	select MFD_SYSCON
 	help
 	  Support for ethernet controller on Altera SOCFPGA
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index 6e359572b9f0..5b3b06a0a3bf 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -55,6 +55,7 @@ struct socfpga_dwmac {
 	struct	device *dev;
 	struct regmap *sys_mgr_base_addr;
 	struct reset_control *stmmac_rst;
+	struct reset_control *stmmac_ocp_rst;
 	void __iomem *splitter_base;
 	bool f2h_ptp_ref_clk;
 	struct tse_pcs pcs;
@@ -262,8 +263,8 @@ static int socfpga_dwmac_set_phy_mode(struct socfpga_dwmac *dwmac)
 		val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
 
 	/* Assert reset to the enet controller before changing the phy mode */
-	if (dwmac->stmmac_rst)
-		reset_control_assert(dwmac->stmmac_rst);
+	reset_control_assert(dwmac->stmmac_ocp_rst);
+	reset_control_assert(dwmac->stmmac_rst);
 
 	regmap_read(sys_mgr_base_addr, reg_offset, &ctrl);
 	ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift);
@@ -288,8 +289,8 @@ static int socfpga_dwmac_set_phy_mode(struct socfpga_dwmac *dwmac)
 	/* Deassert reset for the phy configuration to be sampled by
 	 * the enet controller, and operation to start in requested mode
 	 */
-	if (dwmac->stmmac_rst)
-		reset_control_deassert(dwmac->stmmac_rst);
+	reset_control_deassert(dwmac->stmmac_ocp_rst);
+	reset_control_deassert(dwmac->stmmac_rst);
 	if (phymode == PHY_INTERFACE_MODE_SGMII) {
 		if (tse_pcs_init(dwmac->pcs.tse_pcs_base, &dwmac->pcs) != 0) {
 			dev_err(dwmac->dev, "Unable to initialize TSE PCS");
@@ -324,6 +325,15 @@ static int socfpga_dwmac_probe(struct platform_device *pdev)
 		goto err_remove_config_dt;
 	}
 
+	dwmac->stmmac_ocp_rst = devm_reset_control_get_optional(dev, "stmmaceth-ocp");
+	if (IS_ERR(dwmac->stmmac_ocp_rst)) {
+		ret = PTR_ERR(dwmac->stmmac_ocp_rst);
+		dev_err(dev, "error getting reset control of ocp %d\n", ret);
+		goto err_remove_config_dt;
+	}
+
+	reset_control_deassert(dwmac->stmmac_ocp_rst);
+
 	ret = socfpga_dwmac_parse_data(dwmac, dev);
 	if (ret) {
 		dev_err(dev, "Unable to parse OF data\n");
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index e79b0d7b388a..cba46b62a1cd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -928,6 +928,7 @@ static void stmmac_check_pcs_mode(struct stmmac_priv *priv)
 static int stmmac_init_phy(struct net_device *dev)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
+	u32 tx_cnt = priv->plat->tx_queues_to_use;
 	struct phy_device *phydev;
 	char phy_id_fmt[MII_BUS_ID_SIZE + 3];
 	char bus_id[MII_BUS_ID_SIZE];
@@ -969,6 +970,15 @@ static int stmmac_init_phy(struct net_device *dev)
 					 SUPPORTED_1000baseT_Full);
 
 	/*
+	 * Half-duplex mode not supported with multiqueue
+	 * half-duplex can only works with single queue
+	 */
+	if (tx_cnt > 1)
+		phydev->supported &= ~(SUPPORTED_1000baseT_Half |
+				       SUPPORTED_100baseT_Half |
+				       SUPPORTED_10baseT_Half);
+
+	/*
 	 * Broken HW is sometimes missing the pull-up resistor on the
 	 * MDIO line, which results in reads to non-existent devices returning
 	 * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent