qlcnic: Add support for per port eswitch configuration

There is an embedded switch per physical port on the adapter.
Add support for enabling and disabling the embedded switch
on per port basis.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 21 insertions, 46 deletions

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index c24c2a4ca7e8..f09e787af0b2 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -2003,36 +2003,6 @@ static int qlcnic_83xx_restart_hw(struct qlcnic_adapter *adapter)
 	return 0;
 }
 
-/**
-* qlcnic_83xx_config_default_opmode
-*
-* @adapter: adapter structure
-*
-* Configure default driver operating mode
-*
-* Returns: Error code or Success(0)
-* */
-int qlcnic_83xx_config_default_opmode(struct qlcnic_adapter *adapter)
-{
-	u32 op_mode;
-	struct qlcnic_hardware_context *ahw = adapter->ahw;
-
-	qlcnic_get_func_no(adapter);
-	op_mode = QLCRDX(ahw, QLC_83XX_DRV_OP_MODE);
-
-	if (test_bit(__QLCNIC_SRIOV_CAPABLE, &adapter->state))
-		op_mode = QLC_83XX_DEFAULT_OPMODE;
-
-	if (op_mode == QLC_83XX_DEFAULT_OPMODE) {
-		adapter->nic_ops->init_driver = qlcnic_83xx_init_default_driver;
-		ahw->idc.state_entry = qlcnic_83xx_idc_ready_state_entry;
-	} else {
-		return -EIO;
-	}
-
-	return 0;
-}
-
 int qlcnic_83xx_get_nic_configuration(struct qlcnic_adapter *adapter)
 {
 	int err;
@@ -2052,26 +2022,26 @@ int qlcnic_83xx_get_nic_configuration(struct qlcnic_adapter *adapter)
 	ahw->max_mac_filters = nic_info.max_mac_filters;
 	ahw->max_mtu = nic_info.max_mtu;
 
-	/* VNIC mode is detected by BIT_23 in capabilities. This bit is also
-	 * set in case device is SRIOV capable. VNIC and SRIOV are mutually
-	 * exclusive. So in case of sriov capable device load driver in
-	 * default mode
+	/* eSwitch capability indicates vNIC mode.
+	 * vNIC and SRIOV are mutually exclusive operational modes.
+	 * If SR-IOV capability is detected, SR-IOV physical function
+	 * will get initialized in default mode.
+	 * SR-IOV virtual function initialization follows a
+	 * different code path and opmode.
+	 * SRIOV mode has precedence over vNIC mode.
 	 */
-	if (test_bit(__QLCNIC_SRIOV_CAPABLE, &adapter->state)) {
-		ahw->nic_mode = QLC_83XX_DEFAULT_MODE;
-		return ahw->nic_mode;
-	}
+	if (test_bit(__QLCNIC_SRIOV_CAPABLE, &adapter->state))
+		return QLC_83XX_DEFAULT_OPMODE;
 
-	if (ahw->capabilities & BIT_23)
-		ahw->nic_mode = QLC_83XX_VIRTUAL_NIC_MODE;
-	else
-		ahw->nic_mode = QLC_83XX_DEFAULT_MODE;
+	if (ahw->capabilities & QLC_83XX_ESWITCH_CAPABILITY)
+		return QLC_83XX_VIRTUAL_NIC_MODE;
 
-	return ahw->nic_mode;
+	return QLC_83XX_DEFAULT_OPMODE;
 }
 
 int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter)
 {
+	struct qlcnic_hardware_context *ahw = adapter->ahw;
 	int ret;
 
 	ret = qlcnic_83xx_get_nic_configuration(adapter);
@@ -2079,11 +2049,16 @@ int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter)
 		return -EIO;
 
 	if (ret == QLC_83XX_VIRTUAL_NIC_MODE) {
+		ahw->nic_mode = QLC_83XX_VIRTUAL_NIC_MODE;
 		if (qlcnic_83xx_config_vnic_opmode(adapter))
 			return -EIO;
-	} else if (ret == QLC_83XX_DEFAULT_MODE) {
-		if (qlcnic_83xx_config_default_opmode(adapter))
-			return -EIO;
+
+	} else if (ret == QLC_83XX_DEFAULT_OPMODE) {
+		ahw->nic_mode = QLC_83XX_DEFAULT_MODE;
+		adapter->nic_ops->init_driver = qlcnic_83xx_init_default_driver;
+		ahw->idc.state_entry = qlcnic_83xx_idc_ready_state_entry;
+	} else {
+		return -EIO;
 	}
 
 	return 0;