diff options
| author | Jarod Wilson <jarod@redhat.com> | 2016-10-17 22:54:05 +0300 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2016-10-18 18:34:18 +0300 |
| commit | 91c527a55664ddf4bee26673a35f91748dae4142 (patch) | |
| tree | 5182f5a33b97804b76af6e0906575dd0044b2e22 /drivers/net/ethernet/intel/igbvf | |
| parent | e1c6dccaf3af291488fbad155d7ee6bc29db262a (diff) | |
| download | linux-91c527a55664ddf4bee26673a35f91748dae4142.tar.xz | |
ethernet/intel: use core min/max MTU checking
e100: min_mtu 68, max_mtu 1500
- remove e100_change_mtu entirely, is identical to old eth_change_mtu,
and no longer serves a purpose. No need to set min_mtu or max_mtu
explicitly, as ether_setup() will already set them to 68 and 1500.
e1000: min_mtu 46, max_mtu 16110
e1000e: min_mtu 68, max_mtu varies based on adapter
fm10k: min_mtu 68, max_mtu 15342
- remove fm10k_change_mtu entirely, does nothing now
i40e: min_mtu 68, max_mtu 9706
i40evf: min_mtu 68, max_mtu 9706
igb: min_mtu 68, max_mtu 9216
- There are two different "max" frame sizes claimed and both checked in
the driver, the larger value wasn't relevant though, so I've set max_mtu
to the smaller of the two values here to retain identical behavior.
igbvf: min_mtu 68, max_mtu 9216
- Same issue as igb duplicated
ixgb: min_mtu 68, max_mtu 16114
- Also remove pointless old == new check, as that's done in dev_set_mtu
ixgbe: min_mtu 68, max_mtu 9710
ixgbevf: min_mtu 68, max_mtu dependent on hardware/firmware
- Some hw can only handle up to max_mtu 1504 on a vf, others 9710
CC: netdev@vger.kernel.org
CC: intel-wired-lan@lists.osuosl.org
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/intel/igbvf')
| -rw-r--r-- | drivers/net/ethernet/intel/igbvf/defines.h | 3 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igbvf/netdev.c | 14 |
2 files changed, 6 insertions, 11 deletions
diff --git a/drivers/net/ethernet/intel/igbvf/defines.h b/drivers/net/ethernet/intel/igbvf/defines.h index ee1ef08d7fc4..f1789d192e24 100644 --- a/drivers/net/ethernet/intel/igbvf/defines.h +++ b/drivers/net/ethernet/intel/igbvf/defines.h @@ -85,7 +85,8 @@ #define E1000_TXD_CMD_DEXT 0x20000000 /* Desc extension (0 = legacy) */ #define E1000_TXD_STAT_DD 0x00000001 /* Desc Done */ -#define MAX_JUMBO_FRAME_SIZE 0x3F00 +#define MAX_JUMBO_FRAME_SIZE 0x3F00 +#define MAX_STD_JUMBO_FRAME_SIZE 9216 /* 802.1q VLAN Packet Size */ #define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */ diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index 12bb877df860..810fcf7aa2c6 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -2356,16 +2356,6 @@ static int igbvf_change_mtu(struct net_device *netdev, int new_mtu) struct igbvf_adapter *adapter = netdev_priv(netdev); int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; - if (new_mtu < 68 || new_mtu > INT_MAX - ETH_HLEN - ETH_FCS_LEN || - max_frame > MAX_JUMBO_FRAME_SIZE) - return -EINVAL; - -#define MAX_STD_JUMBO_FRAME_SIZE 9234 - if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { - dev_err(&adapter->pdev->dev, "MTU > 9216 not supported.\n"); - return -EINVAL; - } - while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state)) usleep_range(1000, 2000); /* igbvf_down has a dependency on max_frame_size */ @@ -2786,6 +2776,10 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX; + /* MTU range: 68 - 9216 */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = MAX_STD_JUMBO_FRAME_SIZE; + /*reset the controller to put the device in a known good state */ err = hw->mac.ops.reset_hw(hw); if (err) { |