Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Most notable changes in here:

   1) By far the biggest accomplishment, thanks to a large range of
      contributors, is the addition of multi-send for transmit.  This is
      the result of discussions back in Chicago, and the hard work of
      several individuals.

      Now, when the ->ndo_start_xmit() method of a driver sees
      skb->xmit_more as true, it can choose to defer the doorbell
      telling the driver to start processing the new TX queue entires.

      skb->xmit_more means that the generic networking is guaranteed to
      call the driver immediately with another SKB to send.

      There is logic added to the qdisc layer to dequeue multiple
      packets at a time, and the handling mis-predicted offloads in
      software is now done with no locks held.

      Finally, pktgen is extended to have a "burst" parameter that can
      be used to test a multi-send implementation.

      Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4,
      virtio_net

      Adding support is almost trivial, so export more drivers to
      support this optimization soon.

      I want to thank, in no particular or implied order, Jesper
      Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal
      Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann,
      David Tat, Hannes Frederic Sowa, and Rusty Russell.

   2) PTP and timestamping support in bnx2x, from Michal Kalderon.

   3) Allow adjusting the rx_copybreak threshold for a driver via
      ethtool, and add rx_copybreak support to enic driver.  From
      Govindarajulu Varadarajan.

   4) Significant enhancements to the generic PHY layer and the bcm7xxx
      driver in particular (EEE support, auto power down, etc.) from
      Florian Fainelli.

   5) Allow raw buffers to be used for flow dissection, allowing drivers
      to determine the optimal "linear pull" size for devices that DMA
      into pools of pages.  The objective is to get exactly the
      necessary amount of headers into the linear SKB area pre-pulled,
      but no more.  The new interface drivers use is eth_get_headlen().
      From WANG Cong, with driver conversions (several had their own
      by-hand duplicated implementations) by Alexander Duyck and Eric
      Dumazet.

   6) Support checksumming more smoothly and efficiently for
      encapsulations, and add "foo over UDP" facility.  From Tom
      Herbert.

   7) Add Broadcom SF2 switch driver to DSA layer, from Florian
      Fainelli.

   8) eBPF now can load programs via a system call and has an extensive
      testsuite.  Alexei Starovoitov and Daniel Borkmann.

   9) Major overhaul of the packet scheduler to use RCU in several major
      areas such as the classifiers and rate estimators.  From John
      Fastabend.

  10) Add driver for Intel FM10000 Ethernet Switch, from Alexander
      Duyck.

  11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric
      Dumazet.

  12) Add Datacenter TCP congestion control algorithm support, From
      Florian Westphal.

  13) Reorganize sk_buff so that __copy_skb_header() is significantly
      faster.  From Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits)
  netlabel: directly return netlbl_unlabel_genl_init()
  net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers
  net: description of dma_cookie cause make xmldocs warning
  cxgb4: clean up a type issue
  cxgb4: potential shift wrapping bug
  i40e: skb->xmit_more support
  net: fs_enet: Add NAPI TX
  net: fs_enet: Remove non NAPI RX
  r8169:add support for RTL8168EP
  net_sched: copy exts->type in tcf_exts_change()
  wimax: convert printk to pr_foo()
  af_unix: remove 0 assignment on static
  ipv6: Do not warn for informational ICMP messages, regardless of type.
  Update Intel Ethernet Driver maintainers list
  bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING
  tipc: fix bug in multicast congestion handling
  net: better IFF_XMIT_DST_RELEASE support
  net/mlx4_en: remove NETDEV_TX_BUSY
  3c59x: fix bad split of cpu_to_le32(pci_map_single())
  net: bcmgenet: fix Tx ring priority programming
  ...

1 files changed, 534 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_common.c b/drivers/net/ethernet/intel/fm10k/fm10k_common.c
new file mode 100644
index 000000000000..bf19dccd4288
--- /dev/null
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_common.c
@@ -0,0 +1,534 @@
+/* Intel Ethernet Switch Host Interface Driver
+ * Copyright(c) 2013 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#include "fm10k_common.h"
+
+/**
+ *  fm10k_get_bus_info_generic - Generic set PCI bus info
+ *  @hw: pointer to hardware structure
+ *
+ *  Gets the PCI bus info (speed, width, type) then calls helper function to
+ *  store this data within the fm10k_hw structure.
+ **/
+s32 fm10k_get_bus_info_generic(struct fm10k_hw *hw)
+{
+	u16 link_cap, link_status, device_cap, device_control;
+
+	/* Get the maximum link width and speed from PCIe config space */
+	link_cap = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_LINK_CAP);
+
+	switch (link_cap & FM10K_PCIE_LINK_WIDTH) {
+	case FM10K_PCIE_LINK_WIDTH_1:
+		hw->bus_caps.width = fm10k_bus_width_pcie_x1;
+		break;
+	case FM10K_PCIE_LINK_WIDTH_2:
+		hw->bus_caps.width = fm10k_bus_width_pcie_x2;
+		break;
+	case FM10K_PCIE_LINK_WIDTH_4:
+		hw->bus_caps.width = fm10k_bus_width_pcie_x4;
+		break;
+	case FM10K_PCIE_LINK_WIDTH_8:
+		hw->bus_caps.width = fm10k_bus_width_pcie_x8;
+		break;
+	default:
+		hw->bus_caps.width = fm10k_bus_width_unknown;
+		break;
+	}
+
+	switch (link_cap & FM10K_PCIE_LINK_SPEED) {
+	case FM10K_PCIE_LINK_SPEED_2500:
+		hw->bus_caps.speed = fm10k_bus_speed_2500;
+		break;
+	case FM10K_PCIE_LINK_SPEED_5000:
+		hw->bus_caps.speed = fm10k_bus_speed_5000;
+		break;
+	case FM10K_PCIE_LINK_SPEED_8000:
+		hw->bus_caps.speed = fm10k_bus_speed_8000;
+		break;
+	default:
+		hw->bus_caps.speed = fm10k_bus_speed_unknown;
+		break;
+	}
+
+	/* Get the PCIe maximum payload size for the PCIe function */
+	device_cap = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_DEV_CAP);
+
+	switch (device_cap & FM10K_PCIE_DEV_CAP_PAYLOAD) {
+	case FM10K_PCIE_DEV_CAP_PAYLOAD_128:
+		hw->bus_caps.payload = fm10k_bus_payload_128;
+		break;
+	case FM10K_PCIE_DEV_CAP_PAYLOAD_256:
+		hw->bus_caps.payload = fm10k_bus_payload_256;
+		break;
+	case FM10K_PCIE_DEV_CAP_PAYLOAD_512:
+		hw->bus_caps.payload = fm10k_bus_payload_512;
+		break;
+	default:
+		hw->bus_caps.payload = fm10k_bus_payload_unknown;
+		break;
+	}
+
+	/* Get the negotiated link width and speed from PCIe config space */
+	link_status = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_LINK_STATUS);
+
+	switch (link_status & FM10K_PCIE_LINK_WIDTH) {
+	case FM10K_PCIE_LINK_WIDTH_1:
+		hw->bus.width = fm10k_bus_width_pcie_x1;
+		break;
+	case FM10K_PCIE_LINK_WIDTH_2:
+		hw->bus.width = fm10k_bus_width_pcie_x2;
+		break;
+	case FM10K_PCIE_LINK_WIDTH_4:
+		hw->bus.width = fm10k_bus_width_pcie_x4;
+		break;
+	case FM10K_PCIE_LINK_WIDTH_8:
+		hw->bus.width = fm10k_bus_width_pcie_x8;
+		break;
+	default:
+		hw->bus.width = fm10k_bus_width_unknown;
+		break;
+	}
+
+	switch (link_status & FM10K_PCIE_LINK_SPEED) {
+	case FM10K_PCIE_LINK_SPEED_2500:
+		hw->bus.speed = fm10k_bus_speed_2500;
+		break;
+	case FM10K_PCIE_LINK_SPEED_5000:
+		hw->bus.speed = fm10k_bus_speed_5000;
+		break;
+	case FM10K_PCIE_LINK_SPEED_8000:
+		hw->bus.speed = fm10k_bus_speed_8000;
+		break;
+	default:
+		hw->bus.speed = fm10k_bus_speed_unknown;
+		break;
+	}
+
+	/* Get the negotiated PCIe maximum payload size for the PCIe function */
+	device_control = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_DEV_CTRL);
+
+	switch (device_control & FM10K_PCIE_DEV_CTRL_PAYLOAD) {
+	case FM10K_PCIE_DEV_CTRL_PAYLOAD_128:
+		hw->bus.payload = fm10k_bus_payload_128;
+		break;
+	case FM10K_PCIE_DEV_CTRL_PAYLOAD_256:
+		hw->bus.payload = fm10k_bus_payload_256;
+		break;
+	case FM10K_PCIE_DEV_CTRL_PAYLOAD_512:
+		hw->bus.payload = fm10k_bus_payload_512;
+		break;
+	default:
+		hw->bus.payload = fm10k_bus_payload_unknown;
+		break;
+	}
+
+	return 0;
+}
+
+static u16 fm10k_get_pcie_msix_count_generic(struct fm10k_hw *hw)
+{
+	u16 msix_count;
+
+	/* read in value from MSI-X capability register */
+	msix_count = fm10k_read_pci_cfg_word(hw, FM10K_PCI_MSIX_MSG_CTRL);
+	msix_count &= FM10K_PCI_MSIX_MSG_CTRL_TBL_SZ_MASK;
+
+	/* MSI-X count is zero-based in HW */
+	msix_count++;
+
+	if (msix_count > FM10K_MAX_MSIX_VECTORS)
+		msix_count = FM10K_MAX_MSIX_VECTORS;
+
+	return msix_count;
+}
+
+/**
+ *  fm10k_get_invariants_generic - Inits constant values
+ *  @hw: pointer to the hardware structure
+ *
+ *  Initialize the common invariants for the device.
+ **/
+s32 fm10k_get_invariants_generic(struct fm10k_hw *hw)
+{
+	struct fm10k_mac_info *mac = &hw->mac;
+
+	/* initialize GLORT state to avoid any false hits */
+	mac->dglort_map = FM10K_DGLORTMAP_NONE;
+
+	/* record maximum number of MSI-X vectors */
+	mac->max_msix_vectors = fm10k_get_pcie_msix_count_generic(hw);
+
+	return 0;
+}
+
+/**
+ *  fm10k_start_hw_generic - Prepare hardware for Tx/Rx
+ *  @hw: pointer to hardware structure
+ *
+ *  This function sets the Tx ready flag to indicate that the Tx path has
+ *  been initialized.
+ **/
+s32 fm10k_start_hw_generic(struct fm10k_hw *hw)
+{
+	/* set flag indicating we are beginning Tx */
+	hw->mac.tx_ready = true;
+
+	return 0;
+}
+
+/**
+ *  fm10k_disable_queues_generic - Stop Tx/Rx queues
+ *  @hw: pointer to hardware structure
+ *  @q_cnt: number of queues to be disabled
+ *
+ **/
+s32 fm10k_disable_queues_generic(struct fm10k_hw *hw, u16 q_cnt)
+{
+	u32 reg;
+	u16 i, time;
+
+	/* clear tx_ready to prevent any false hits for reset */
+	hw->mac.tx_ready = false;
+
+	/* clear the enable bit for all rings */
+	for (i = 0; i < q_cnt; i++) {
+		reg = fm10k_read_reg(hw, FM10K_TXDCTL(i));
+		fm10k_write_reg(hw, FM10K_TXDCTL(i),
+				reg & ~FM10K_TXDCTL_ENABLE);
+		reg = fm10k_read_reg(hw, FM10K_RXQCTL(i));
+		fm10k_write_reg(hw, FM10K_RXQCTL(i),
+				reg & ~FM10K_RXQCTL_ENABLE);
+	}
+
+	fm10k_write_flush(hw);
+	udelay(1);
+
+	/* loop through all queues to verify that they are all disabled */
+	for (i = 0, time = FM10K_QUEUE_DISABLE_TIMEOUT; time;) {
+		/* if we are at end of rings all rings are disabled */
+		if (i == q_cnt)
+			return 0;
+
+		/* if queue enables cleared, then move to next ring pair */
+		reg = fm10k_read_reg(hw, FM10K_TXDCTL(i));
+		if (!~reg || !(reg & FM10K_TXDCTL_ENABLE)) {
+			reg = fm10k_read_reg(hw, FM10K_RXQCTL(i));
+			if (!~reg || !(reg & FM10K_RXQCTL_ENABLE)) {
+				i++;
+				continue;
+			}
+		}
+
+		/* decrement time and wait 1 usec */
+		time--;
+		if (time)
+			udelay(1);
+	}
+
+	return FM10K_ERR_REQUESTS_PENDING;
+}
+
+/**
+ *  fm10k_stop_hw_generic - Stop Tx/Rx units
+ *  @hw: pointer to hardware structure
+ *
+ **/
+s32 fm10k_stop_hw_generic(struct fm10k_hw *hw)
+{
+	return fm10k_disable_queues_generic(hw, hw->mac.max_queues);
+}
+
+/**
+ *  fm10k_read_hw_stats_32b - Reads value of 32-bit registers
+ *  @hw: pointer to the hardware structure
+ *  @addr: address of register containing a 32-bit value
+ *
+ *  Function reads the content of the register and returns the delta
+ *  between the base and the current value.
+ *  **/
+u32 fm10k_read_hw_stats_32b(struct fm10k_hw *hw, u32 addr,
+			    struct fm10k_hw_stat *stat)
+{
+	u32 delta = fm10k_read_reg(hw, addr) - stat->base_l;
+
+	if (FM10K_REMOVED(hw->hw_addr))
+		stat->base_h = 0;
+
+	return delta;
+}
+
+/**
+ *  fm10k_read_hw_stats_48b - Reads value of 48-bit registers
+ *  @hw: pointer to the hardware structure
+ *  @addr: address of register containing the lower 32-bit value
+ *
+ *  Function reads the content of 2 registers, combined to represent a 48-bit
+ *  statistical value. Extra processing is required to handle overflowing.
+ *  Finally, a delta value is returned representing the difference between the
+ *  values stored in registers and values stored in the statistic counters.
+ *  **/
+static u64 fm10k_read_hw_stats_48b(struct fm10k_hw *hw, u32 addr,
+				   struct fm10k_hw_stat *stat)
+{
+	u32 count_l;
+	u32 count_h;
+	u32 count_tmp;
+	u64 delta;
+
+	count_h = fm10k_read_reg(hw, addr + 1);
+
+	/* Check for overflow */
+	do {
+		count_tmp = count_h;
+		count_l = fm10k_read_reg(hw, addr);
+		count_h = fm10k_read_reg(hw, addr + 1);
+	} while (count_h != count_tmp);
+
+	delta = ((u64)(count_h - stat->base_h) << 32) + count_l;
+	delta -= stat->base_l;
+
+	return delta & FM10K_48_BIT_MASK;
+}
+
+/**
+ *  fm10k_update_hw_base_48b - Updates 48-bit statistic base value
+ *  @stat: pointer to the hardware statistic structure
+ *  @delta: value to be updated into the hardware statistic structure
+ *
+ *  Function receives a value and determines if an update is required based on
+ *  a delta calculation. Only the base value will be updated.
+ **/
+static void fm10k_update_hw_base_48b(struct fm10k_hw_stat *stat, u64 delta)
+{
+	if (!delta)
+		return;
+
+	/* update lower 32 bits */
+	delta += stat->base_l;
+	stat->base_l = (u32)delta;
+
+	/* update upper 32 bits */
+	stat->base_h += (u32)(delta >> 32);
+}
+
+/**
+ *  fm10k_update_hw_stats_tx_q - Updates TX queue statistics counters
+ *  @hw: pointer to the hardware structure
+ *  @q: pointer to the ring of hardware statistics queue
+ *  @idx: index pointing to the start of the ring iteration
+ *
+ *  Function updates the TX queue statistics counters that are related to the
+ *  hardware.
+ **/
+static void fm10k_update_hw_stats_tx_q(struct fm10k_hw *hw,
+				       struct fm10k_hw_stats_q *q,
+				       u32 idx)
+{
+	u32 id_tx, id_tx_prev, tx_packets;
+	u64 tx_bytes = 0;
+
+	/* Retrieve TX Owner Data */
+	id_tx = fm10k_read_reg(hw, FM10K_TXQCTL(idx));
+
+	/* Process TX Ring */
+	do {
+		tx_packets = fm10k_read_hw_stats_32b(hw, FM10K_QPTC(idx),
+						     &q->tx_packets);
+
+		if (tx_packets)
+			tx_bytes = fm10k_read_hw_stats_48b(hw,
+							   FM10K_QBTC_L(idx),
+							   &q->tx_bytes);
+
+		/* Re-Check Owner Data */
+		id_tx_prev = id_tx;
+		id_tx = fm10k_read_reg(hw, FM10K_TXQCTL(idx));
+	} while ((id_tx ^ id_tx_prev) & FM10K_TXQCTL_ID_MASK);
+
+	/* drop non-ID bits and set VALID ID bit */
+	id_tx &= FM10K_TXQCTL_ID_MASK;
+	id_tx |= FM10K_STAT_VALID;
+
+	/* update packet counts */
+	if (q->tx_stats_idx == id_tx) {
+		q->tx_packets.count += tx_packets;
+		q->tx_bytes.count += tx_bytes;
+	}
+
+	/* update bases and record ID */
+	fm10k_update_hw_base_32b(&q->tx_packets, tx_packets);
+	fm10k_update_hw_base_48b(&q->tx_bytes, tx_bytes);
+
+	q->tx_stats_idx = id_tx;
+}
+
+/**
+ *  fm10k_update_hw_stats_rx_q - Updates RX queue statistics counters
+ *  @hw: pointer to the hardware structure
+ *  @q: pointer to the ring of hardware statistics queue
+ *  @idx: index pointing to the start of the ring iteration
+ *
+ *  Function updates the RX queue statistics counters that are related to the
+ *  hardware.
+ **/
+static void fm10k_update_hw_stats_rx_q(struct fm10k_hw *hw,
+				       struct fm10k_hw_stats_q *q,
+				       u32 idx)
+{
+	u32 id_rx, id_rx_prev, rx_packets, rx_drops;
+	u64 rx_bytes = 0;
+
+	/* Retrieve RX Owner Data */
+	id_rx = fm10k_read_reg(hw, FM10K_RXQCTL(idx));
+
+	/* Process RX Ring*/
+	do {
+		rx_drops = fm10k_read_hw_stats_32b(hw, FM10K_QPRDC(idx),
+						   &q->rx_drops);
+
+		rx_packets = fm10k_read_hw_stats_32b(hw, FM10K_QPRC(idx),
+						     &q->rx_packets);
+
+		if (rx_packets)
+			rx_bytes = fm10k_read_hw_stats_48b(hw,
+							   FM10K_QBRC_L(idx),
+							   &q->rx_bytes);
+
+		/* Re-Check Owner Data */
+		id_rx_prev = id_rx;
+		id_rx = fm10k_read_reg(hw, FM10K_RXQCTL(idx));
+	} while ((id_rx ^ id_rx_prev) & FM10K_RXQCTL_ID_MASK);
+
+	/* drop non-ID bits and set VALID ID bit */
+	id_rx &= FM10K_RXQCTL_ID_MASK;
+	id_rx |= FM10K_STAT_VALID;
+
+	/* update packet counts */
+	if (q->rx_stats_idx == id_rx) {
+		q->rx_drops.count += rx_drops;
+		q->rx_packets.count += rx_packets;
+		q->rx_bytes.count += rx_bytes;
+	}
+
+	/* update bases and record ID */
+	fm10k_update_hw_base_32b(&q->rx_drops, rx_drops);
+	fm10k_update_hw_base_32b(&q->rx_packets, rx_packets);
+	fm10k_update_hw_base_48b(&q->rx_bytes, rx_bytes);
+
+	q->rx_stats_idx = id_rx;
+}
+
+/**
+ *  fm10k_update_hw_stats_q - Updates queue statistics counters
+ *  @hw: pointer to the hardware structure
+ *  @q: pointer to the ring of hardware statistics queue
+ *  @idx: index pointing to the start of the ring iteration
+ *  @count: number of queues to iterate over
+ *
+ *  Function updates the queue statistics counters that are related to the
+ *  hardware.
+ **/
+void fm10k_update_hw_stats_q(struct fm10k_hw *hw, struct fm10k_hw_stats_q *q,
+			     u32 idx, u32 count)
+{
+	u32 i;
+
+	for (i = 0; i < count; i++, idx++, q++) {
+		fm10k_update_hw_stats_tx_q(hw, q, idx);
+		fm10k_update_hw_stats_rx_q(hw, q, idx);
+	}
+}
+
+/**
+ *  fm10k_unbind_hw_stats_q - Unbind the queue counters from their queues
+ *  @hw: pointer to the hardware structure
+ *  @q: pointer to the ring of hardware statistics queue
+ *  @idx: index pointing to the start of the ring iteration
+ *  @count: number of queues to iterate over
+ *
+ *  Function invalidates the index values for the queues so any updates that
+ *  may have happened are ignored and the base for the queue stats is reset.
+ **/
+
+void fm10k_unbind_hw_stats_q(struct fm10k_hw_stats_q *q, u32 idx, u32 count)
+{
+	u32 i;
+
+	for (i = 0; i < count; i++, idx++, q++) {
+		q->rx_stats_idx = 0;
+		q->tx_stats_idx = 0;
+	}
+}
+
+/**
+ *  fm10k_get_host_state_generic - Returns the state of the host
+ *  @hw: pointer to hardware structure
+ *  @host_ready: pointer to boolean value that will record host state
+ *
+ *  This function will check the health of the mailbox and Tx queue 0
+ *  in order to determine if we should report that the link is up or not.
+ **/
+s32 fm10k_get_host_state_generic(struct fm10k_hw *hw, bool *host_ready)
+{
+	struct fm10k_mbx_info *mbx = &hw->mbx;
+	struct fm10k_mac_info *mac = &hw->mac;
+	s32 ret_val = 0;
+	u32 txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(0));
+
+	/* process upstream mailbox in case interrupts were disabled */
+	mbx->ops.process(hw, mbx);
+
+	/* If Tx is no longer enabled link should come down */
+	if (!(~txdctl) || !(txdctl & FM10K_TXDCTL_ENABLE))
+		mac->get_host_state = true;
+
+	/* exit if not checking for link, or link cannot be changed */
+	if (!mac->get_host_state || !(~txdctl))
+		goto out;
+
+	/* if we somehow dropped the Tx enable we should reset */
+	if (hw->mac.tx_ready && !(txdctl & FM10K_TXDCTL_ENABLE)) {
+		ret_val = FM10K_ERR_RESET_REQUESTED;
+		goto out;
+	}
+
+	/* if Mailbox timed out we should request reset */
+	if (!mbx->timeout) {
+		ret_val = FM10K_ERR_RESET_REQUESTED;
+		goto out;
+	}
+
+	/* verify Mailbox is still valid */
+	if (!mbx->ops.tx_ready(mbx, FM10K_VFMBX_MSG_MTU))
+		goto out;
+
+	/* interface cannot receive traffic without logical ports */
+	if (mac->dglort_map == FM10K_DGLORTMAP_NONE)
+		goto out;
+
+	/* if we passed all the tests above then the switch is ready and we no
+	 * longer need to check for link
+	 */
+	mac->get_host_state = false;
+
+out:
+	*host_ready = !mac->get_host_state;
+	return ret_val;
+}