drivers/net: delete all code/drivers depending on CONFIG_MCA

The support for CONFIG_MCA is being removed, since the 20
year old hardware simply isn't capable of meeting today's
software demands on CPU and memory resources.

This commit removes any MCA specific net drivers, and removes
any MCA specific probe/support code from drivers that were
doing a dual ISA/MCA role.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

1 files changed, 4 insertions, 206 deletions

diff --git a/drivers/net/ethernet/amd/depca.c b/drivers/net/ethernet/amd/depca.c
index 7f7b99a5f024..c771de71612a 100644
--- a/drivers/net/ethernet/amd/depca.c
+++ b/drivers/net/ethernet/amd/depca.c
@@ -155,23 +155,10 @@
     2 depca's in a PC).
 
     ************************************************************************
-    Support for MCA EtherWORKS cards added 11-3-98.
+    Support for MCA EtherWORKS cards added 11-3-98. (MCA since deleted)
     Verified to work with up to 2 DE212 cards in a system (although not
       fully stress-tested).
 
-    Currently known bugs/limitations:
-
-    Note:  with the MCA stuff as a module, it trusts the MCA configuration,
-           not the command line for IRQ and memory address.  You can
-           specify them if you want, but it will throw your values out.
-           You still have to pass the IO address it was configured as
-           though.
-
-    ************************************************************************
-    TO DO:
-    ------
-
-
     Revision History
     ----------------
 
@@ -261,10 +248,6 @@
 #include <asm/io.h>
 #include <asm/dma.h>
 
-#ifdef CONFIG_MCA
-#include <linux/mca.h>
-#endif
-
 #ifdef CONFIG_EISA
 #include <linux/eisa.h>
 #endif
@@ -360,44 +343,6 @@ static struct eisa_driver depca_eisa_driver = {
 };
 #endif
 
-#ifdef CONFIG_MCA
-/*
-** Adapter ID for the MCA EtherWORKS DE210/212 adapter
-*/
-#define DE210_ID 0x628d
-#define DE212_ID 0x6def
-
-static short depca_mca_adapter_ids[] = {
-	DE210_ID,
-	DE212_ID,
-	0x0000
-};
-
-static char *depca_mca_adapter_name[] = {
-	"DEC EtherWORKS MC Adapter (DE210)",
-	"DEC EtherWORKS MC Adapter (DE212)",
-	NULL
-};
-
-static enum depca_type depca_mca_adapter_type[] = {
-	de210,
-	de212,
-	0
-};
-
-static int depca_mca_probe (struct device *);
-
-static struct mca_driver depca_mca_driver = {
-	.id_table = depca_mca_adapter_ids,
-	.driver   = {
-		.name   = depca_string,
-		.bus    = &mca_bus_type,
-		.probe  = depca_mca_probe,
-		.remove = __devexit_p(depca_device_remove),
-	},
-};
-#endif
-
 static int depca_isa_probe (struct platform_device *);
 
 static int __devexit depca_isa_remove(struct platform_device *pdev)
@@ -464,8 +409,7 @@ struct depca_private {
 	char adapter_name[DEPCA_STRLEN];	/* /proc/ioports string                  */
 	enum depca_type adapter;		/* Adapter type */
 	enum {
-                DEPCA_BUS_MCA = 1,
-                DEPCA_BUS_ISA,
+                DEPCA_BUS_ISA = 1,
                 DEPCA_BUS_EISA,
         } depca_bus;	        /* type of bus */
 	struct depca_init init_block;	/* Shadow Initialization block            */
@@ -624,12 +568,6 @@ static int __init depca_hw_init (struct net_device *dev, struct device *device)
 	       dev_name(device), depca_signature[lp->adapter], ioaddr);
 
 	switch (lp->depca_bus) {
-#ifdef CONFIG_MCA
-	case DEPCA_BUS_MCA:
-		printk(" (MCA slot %d)", to_mca_device(device)->slot + 1);
-		break;
-#endif
-
 #ifdef CONFIG_EISA
 	case DEPCA_BUS_EISA:
 		printk(" (EISA slot %d)", to_eisa_device(device)->slot);
@@ -661,10 +599,7 @@ static int __init depca_hw_init (struct net_device *dev, struct device *device)
 	if (nicsr & BUF) {
 		nicsr &= ~BS;	/* DEPCA RAM in top 32k */
 		netRAM -= 32;
-
-		/* Only EISA/ISA needs start address to be re-computed */
-		if (lp->depca_bus != DEPCA_BUS_MCA)
-			mem_start += 0x8000;
+		mem_start += 0x8000;
 	}
 
 	if ((mem_len = (NUM_RX_DESC * (sizeof(struct depca_rx_desc) + RX_BUFF_SZ) + NUM_TX_DESC * (sizeof(struct depca_tx_desc) + TX_BUFF_SZ) + sizeof(struct depca_init)))
@@ -1325,130 +1260,6 @@ static int __init depca_common_init (u_long ioaddr, struct net_device **devp)
 	return status;
 }
 
-#ifdef CONFIG_MCA
-/*
-** Microchannel bus I/O device probe
-*/
-static int __init depca_mca_probe(struct device *device)
-{
-	unsigned char pos[2];
-	unsigned char where;
-	unsigned long iobase, mem_start;
-	int irq, err;
-	struct mca_device *mdev = to_mca_device (device);
-	struct net_device *dev;
-	struct depca_private *lp;
-
-	/*
-	** Search for the adapter.  If an address has been given, search
-	** specifically for the card at that address.  Otherwise find the
-	** first card in the system.
-	*/
-
-	pos[0] = mca_device_read_stored_pos(mdev, 2);
-	pos[1] = mca_device_read_stored_pos(mdev, 3);
-
-	/*
-	** IO of card is handled by bits 1 and 2 of pos0.
-	**
-	**    bit2 bit1    IO
-	**       0    0    0x2c00
-	**       0    1    0x2c10
-	**       1    0    0x2c20
-	**       1    1    0x2c30
-	*/
-	where = (pos[0] & 6) >> 1;
-	iobase = 0x2c00 + (0x10 * where);
-
-	/*
-	** Found the adapter we were looking for. Now start setting it up.
-	**
-	** First work on decoding the IRQ.  It's stored in the lower 4 bits
-	** of pos1.  Bits are as follows (from the ADF file):
-	**
-	**      Bits
-	**   3   2   1   0    IRQ
-	**   --------------------
-	**   0   0   1   0     5
-	**   0   0   0   1     9
-	**   0   1   0   0    10
-	**   1   0   0   0    11
-	*/
-	where = pos[1] & 0x0f;
-	switch (where) {
-	case 1:
-		irq = 9;
-		break;
-	case 2:
-		irq = 5;
-		break;
-	case 4:
-		irq = 10;
-		break;
-	case 8:
-		irq = 11;
-		break;
-	default:
-		printk("%s: mca_probe IRQ error.  You should never get here (%d).\n", mdev->name, where);
-		return -EINVAL;
-	}
-
-	/*
-	** Shared memory address of adapter is stored in bits 3-5 of pos0.
-	** They are mapped as follows:
-	**
-	**    Bit
-	**   5  4  3       Memory Addresses
-	**   0  0  0       C0000-CFFFF (64K)
-	**   1  0  0       C8000-CFFFF (32K)
-	**   0  0  1       D0000-DFFFF (64K)
-	**   1  0  1       D8000-DFFFF (32K)
-	**   0  1  0       E0000-EFFFF (64K)
-	**   1  1  0       E8000-EFFFF (32K)
-	*/
-	where = (pos[0] & 0x18) >> 3;
-	mem_start = 0xc0000 + (where * 0x10000);
-	if (pos[0] & 0x20) {
-		mem_start += 0x8000;
-	}
-
-	/* claim the slot */
-	strncpy(mdev->name, depca_mca_adapter_name[mdev->index],
-		sizeof(mdev->name));
-	mca_device_set_claim(mdev, 1);
-
-        /*
-	** Get everything allocated and initialized...  (almost just
-	** like the ISA and EISA probes)
-	*/
-	irq = mca_device_transform_irq(mdev, irq);
-	iobase = mca_device_transform_ioport(mdev, iobase);
-
-	if ((err = depca_common_init (iobase, &dev)))
-		goto out_unclaim;
-
-	dev->irq = irq;
-	dev->base_addr = iobase;
-	lp = netdev_priv(dev);
-	lp->depca_bus = DEPCA_BUS_MCA;
-	lp->adapter = depca_mca_adapter_type[mdev->index];
-	lp->mem_start = mem_start;
-
-	if ((err = depca_hw_init(dev, device)))
-		goto out_free;
-
-	return 0;
-
- out_free:
-	free_netdev (dev);
-	release_region (iobase, DEPCA_TOTAL_SIZE);
- out_unclaim:
-	mca_device_set_claim(mdev, 0);
-
-	return err;
-}
-#endif
-
 /*
 ** ISA bus I/O device probe
 */
@@ -2059,15 +1870,10 @@ static int __init depca_module_init (void)
 {
 	int err = 0;
 
-#ifdef CONFIG_MCA
-	err = mca_register_driver(&depca_mca_driver);
-	if (err)
-		goto err;
-#endif
 #ifdef CONFIG_EISA
 	err = eisa_driver_register(&depca_eisa_driver);
 	if (err)
-		goto err_mca;
+		goto err_eisa;
 #endif
 	err = platform_driver_register(&depca_isa_driver);
 	if (err)
@@ -2079,11 +1885,6 @@ static int __init depca_module_init (void)
 err_eisa:
 #ifdef CONFIG_EISA
 	eisa_driver_unregister(&depca_eisa_driver);
-err_mca:
-#endif
-#ifdef CONFIG_MCA
-	mca_unregister_driver(&depca_mca_driver);
-err:
 #endif
 	return err;
 }
@@ -2091,9 +1892,6 @@ err:
 static void __exit depca_module_exit (void)
 {
 	int i;
-#ifdef CONFIG_MCA
-        mca_unregister_driver (&depca_mca_driver);
-#endif
 #ifdef CONFIG_EISA
         eisa_driver_unregister (&depca_eisa_driver);
 #endif