diff options
| author | Masahiro Yamada <yamada.masahiro@socionext.com> | 2017-06-13 16:45:36 +0300 |
|---|---|---|
| committer | Boris Brezillon <boris.brezillon@free-electrons.com> | 2017-06-20 10:14:25 +0300 |
| commit | 959e9f2ae9dac4821d7da354a37272650febebbe (patch) | |
| tree | 4922e3ceb5f0db0faebc28da7042c47fd26d6457 /drivers/mtd | |
| parent | b21ff825d6b7fa7122f9c4455f9a0f157b9fb225 (diff) | |
| download | linux-959e9f2ae9dac4821d7da354a37272650febebbe.tar.xz | |
mtd: nand: denali: remove unneeded find_valid_banks()
The function find_valid_banks() issues the Read ID (0x90) command,
then compares the first byte (Manufacturer ID) of each bank with
the one of bank0.
This is equivalent to what nand_scan_ident() does. The number of
chips is detected there, so this is unneeded.
What is worse for find_valid_banks() is that, if multiple chips are
connected to INTEL_CE4100 platform, it crashes the kernel by BUG().
This is what we should avoid. This function is just harmful and
unneeded.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/nand/denali.c | 47 | ||||
| -rw-r--r-- | drivers/mtd/nand/denali.h | 1 |
2 files changed, 0 insertions, 48 deletions
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 7133a33b4ad3..122df4c6126d 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -338,51 +338,6 @@ static void get_samsung_nand_para(struct denali_nand_info *denali, } /* - * determines how many NAND chips are connected to the controller. Note for - * Intel CE4100 devices we don't support more than one device. - */ -static void find_valid_banks(struct denali_nand_info *denali) -{ - uint32_t id[denali->max_banks]; - int i; - - denali->total_used_banks = 1; - for (i = 0; i < denali->max_banks; i++) { - index_addr(denali, MODE_11 | (i << 24) | 0, 0x90); - index_addr(denali, MODE_11 | (i << 24) | 1, 0); - index_addr_read_data(denali, MODE_11 | (i << 24) | 2, &id[i]); - - dev_dbg(denali->dev, - "Return 1st ID for bank[%d]: %x\n", i, id[i]); - - if (i == 0) { - if (!(id[i] & 0x0ff)) - break; /* WTF? */ - } else { - if ((id[i] & 0x0ff) == (id[0] & 0x0ff)) - denali->total_used_banks++; - else - break; - } - } - - if (denali->platform == INTEL_CE4100) { - /* - * Platform limitations of the CE4100 device limit - * users to a single chip solution for NAND. - * Multichip support is not enabled. - */ - if (denali->total_used_banks != 1) { - dev_err(denali->dev, - "Sorry, Intel CE4100 only supports a single NAND device.\n"); - BUG(); - } - } - dev_dbg(denali->dev, - "denali->total_used_banks: %d\n", denali->total_used_banks); -} - -/* * Use the configuration feature register to determine the maximum number of * banks that the hardware supports. */ @@ -439,8 +394,6 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali) ioread32(denali->flash_reg + RDWR_EN_HI_CNT), ioread32(denali->flash_reg + CS_SETUP_CNT)); - find_valid_banks(denali); - /* * If the user specified to override the default timings * with a specific ONFI mode, we apply those changes here. diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h index 352d8328b94a..0e4a8965f6f1 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/denali.h @@ -326,7 +326,6 @@ struct denali_nand_info { int platform; struct nand_buf buf; struct device *dev; - int total_used_banks; int page; void __iomem *flash_reg; /* Register Interface */ void __iomem *flash_mem; /* Host Data/Command Interface */ |