Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (69 commits) Revert "[MTD] m25p80.c code cleanup" [MTD] [NAND] GPIO driver depends on ARM... for now. [MTD] [NAND] sh_flctl: fix compile error [MTD] [NOR] AT49BV6416 has swapped erase regions [MTD] [NAND] GPIO NAND flash driver [MTD] cmdlineparts documentation change - explain where mtd-id comes from [MTD] cfi_cmdset_0002.c: Add Macronix CFI V1.0 TopBottom detection [MTD] [NAND] Fix compilation warnings in drivers/mtd/nand/cs553x_nand.c [JFFS2] Write buffer offset adjustment for NOR-ECC (Sibley) flash [MTD] mtdoops: Fix a bug where block may not be erased [MTD] mtdoops: Add a magic number to logged kernel oops [MTD] mtdoops: Fix an off by one error [JFFS2] Correct parameter names of jffs2_compress() in comments [MTD] [NAND] sh_flctl: add support for Renesas SuperH FLCTL [MTD] [NAND] Bug on atmel_nand HW ECC : OOB info not correctly written [MTD] [MAPS] Remove unused variable after ROM API cleanup. [MTD] m25p80.c extended jedec support (v2) [MTD] remove unused mtd parameter in of_mtd_parse_partitions() [MTD] [NAND] remove dead Kconfig associated with !CONFIG_PPC_MERGE [MTD] [NAND] driver extension to support NAND on TQM85xx modules ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2008-10-20 20:03:12 +0400
committer: Linus Torvalds <torvalds@linux-foundation.org> 2008-10-20 20:03:12 +0400
commit: 2be508d847392e431759e370d21cea9412848758 (patch)
tree: be5e00a4d7be4ef353ffe4d550fb80a251d321c3 /drivers/mtd
parent: 01e8ef11bc1a74e65678ed55795f59266d4add01 (diff)
parent: 8a1a6272057e2ad90ab531a70330165888866e60 (diff)
download: linux-2be508d847392e431759e370d21cea9412848758.tar.xz
47 files changed, 4282 insertions, 1299 deletions
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 14f11f8b9e5f..a90d50c2c3e5 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -172,6 +172,11 @@ config MTD_CHAR
 	  memory chips, and also use ioctl() to obtain information about
 	  the device, or to erase parts of it.
 
+config HAVE_MTD_OTP
+	bool
+	help
+	  Enable access to OTP regions using MTD_CHAR.
+
 config MTD_BLKDEVS
 	tristate "Common interface to block layer for MTD 'translation layers'"
 	depends on BLOCK
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index 479d32b57a1e..9408099eec48 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -6,6 +6,7 @@ menu "RAM/ROM/Flash chip drivers"
 config MTD_CFI
 	tristate "Detect flash chips by Common Flash Interface (CFI) probe"
 	select MTD_GEN_PROBE
+	select MTD_CFI_UTIL
 	help
 	  The Common Flash Interface specification was developed by Intel,
 	  AMD and other flash manufactures that provides a universal method
@@ -154,6 +155,7 @@ config MTD_CFI_I8
 config MTD_OTP
 	bool "Protection Registers aka one-time programmable (OTP) bits"
 	depends on MTD_CFI_ADV_OPTIONS
+	select HAVE_MTD_OTP
 	default n
 	help
 	  This enables support for reading, writing and locking so called
@@ -187,7 +189,7 @@ config MTD_CFI_INTELEXT
 	  StrataFlash and other parts.
 
 config MTD_CFI_AMDSTD
-	tristate "Support for AMD/Fujitsu flash chips"
+	tristate "Support for AMD/Fujitsu/Spansion flash chips"
 	depends on MTD_GEN_PROBE
 	select MTD_CFI_UTIL
 	help
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 5f1b472137a0..c93a8be5d5f1 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -478,6 +478,28 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary)
 		else
 			cfi->chips[i].erase_time = 2000000;
 
+		if (cfi->cfiq->WordWriteTimeoutTyp &&
+		    cfi->cfiq->WordWriteTimeoutMax)
+			cfi->chips[i].word_write_time_max =
+				1<<(cfi->cfiq->WordWriteTimeoutTyp +
+				    cfi->cfiq->WordWriteTimeoutMax);
+		else
+			cfi->chips[i].word_write_time_max = 50000 * 8;
+
+		if (cfi->cfiq->BufWriteTimeoutTyp &&
+		    cfi->cfiq->BufWriteTimeoutMax)
+			cfi->chips[i].buffer_write_time_max =
+				1<<(cfi->cfiq->BufWriteTimeoutTyp +
+				    cfi->cfiq->BufWriteTimeoutMax);
+
+		if (cfi->cfiq->BlockEraseTimeoutTyp &&
+		    cfi->cfiq->BlockEraseTimeoutMax)
+			cfi->chips[i].erase_time_max =
+				1000<<(cfi->cfiq->BlockEraseTimeoutTyp +
+				       cfi->cfiq->BlockEraseTimeoutMax);
+		else
+			cfi->chips[i].erase_time_max = 2000000 * 8;
+
 		cfi->chips[i].ref_point_counter = 0;
 		init_waitqueue_head(&(cfi->chips[i].wq));
 	}
@@ -703,6 +725,10 @@ static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long
 	struct cfi_pri_intelext *cfip = cfi->cmdset_priv;
 	unsigned long timeo = jiffies + HZ;
 
+	/* Prevent setting state FL_SYNCING for chip in suspended state. */
+	if (mode == FL_SYNCING && chip->oldstate != FL_READY)
+		goto sleep;
+
 	switch (chip->state) {
 
 	case FL_STATUS:
@@ -808,8 +834,9 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 	DECLARE_WAITQUEUE(wait, current);
 
  retry:
-	if (chip->priv && (mode == FL_WRITING || mode == FL_ERASING
-			   || mode == FL_OTP_WRITE || mode == FL_SHUTDOWN)) {
+	if (chip->priv &&
+	    (mode == FL_WRITING || mode == FL_ERASING || mode == FL_OTP_WRITE
+	    || mode == FL_SHUTDOWN) && chip->state != FL_SYNCING) {
 		/*
 		 * OK. We have possibility for contention on the write/erase
 		 * operations which are global to the real chip and not per
@@ -859,6 +886,14 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 				return ret;
 			}
 			spin_lock(&shared->lock);
+
+			/* We should not own chip if it is already
+			 * in FL_SYNCING state. Put contender and retry. */
+			if (chip->state == FL_SYNCING) {
+				put_chip(map, contender, contender->start);
+				spin_unlock(contender->mutex);
+				goto retry;
+			}
 			spin_unlock(contender->mutex);
 		}
 
@@ -1012,7 +1047,7 @@ static void __xipram xip_enable(struct map_info *map, struct flchip *chip,
 
 static int __xipram xip_wait_for_operation(
 		struct map_info *map, struct flchip *chip,
-		unsigned long adr, unsigned int chip_op_time )
+		unsigned long adr, unsigned int chip_op_time_max)
 {
 	struct cfi_private *cfi = map->fldrv_priv;
 	struct cfi_pri_intelext *cfip = cfi->cmdset_priv;
@@ -1021,7 +1056,7 @@ static int __xipram xip_wait_for_operation(
 	flstate_t oldstate, newstate;
 
        	start = xip_currtime();
-	usec = chip_op_time * 8;
+	usec = chip_op_time_max;
 	if (usec == 0)
 		usec = 500000;
 	done = 0;
@@ -1131,8 +1166,8 @@ static int __xipram xip_wait_for_operation(
 #define XIP_INVAL_CACHED_RANGE(map, from, size)  \
 	INVALIDATE_CACHED_RANGE(map, from, size)
 
-#define INVAL_CACHE_AND_WAIT(map, chip, cmd_adr, inval_adr, inval_len, usec) \
-	xip_wait_for_operation(map, chip, cmd_adr, usec)
+#define INVAL_CACHE_AND_WAIT(map, chip, cmd_adr, inval_adr, inval_len, usec, usec_max) \
+	xip_wait_for_operation(map, chip, cmd_adr, usec_max)
 
 #else
 
@@ -1144,7 +1179,7 @@ static int __xipram xip_wait_for_operation(
 static int inval_cache_and_wait_for_operation(
 		struct map_info *map, struct flchip *chip,
 		unsigned long cmd_adr, unsigned long inval_adr, int inval_len,
-		unsigned int chip_op_time)
+		unsigned int chip_op_time, unsigned int chip_op_time_max)
 {
 	struct cfi_private *cfi = map->fldrv_priv;
 	map_word status, status_OK = CMD(0x80);
@@ -1156,8 +1191,7 @@ static int inval_cache_and_wait_for_operation(
 		INVALIDATE_CACHED_RANGE(map, inval_adr, inval_len);
 	spin_lock(chip->mutex);
 
-	/* set our timeout to 8 times the expected delay */
-	timeo = chip_op_time * 8;
+	timeo = chip_op_time_max;
 	if (!timeo)
 		timeo = 500000;
 	reset_timeo = timeo;
@@ -1217,8 +1251,8 @@ static int inval_cache_and_wait_for_operation(
 
 #endif
 
-#define WAIT_TIMEOUT(map, chip, adr, udelay) \
-	INVAL_CACHE_AND_WAIT(map, chip, adr, 0, 0, udelay);
+#define WAIT_TIMEOUT(map, chip, adr, udelay, udelay_max) \
+	INVAL_CACHE_AND_WAIT(map, chip, adr, 0, 0, udelay, udelay_max);
 
 
 static int do_point_onechip (struct map_info *map, struct flchip *chip, loff_t adr, size_t len)
@@ -1452,7 +1486,8 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
 
 	ret = INVAL_CACHE_AND_WAIT(map, chip, adr,
 				   adr, map_bankwidth(map),
-				   chip->word_write_time);
+				   chip->word_write_time,
+				   chip->word_write_time_max);
 	if (ret) {
 		xip_enable(map, chip, adr);
 		printk(KERN_ERR "%s: word write error (status timeout)\n", map->name);
@@ -1623,7 +1658,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 
 	chip->state = FL_WRITING_TO_BUFFER;
 	map_write(map, write_cmd, cmd_adr);
-	ret = WAIT_TIMEOUT(map, chip, cmd_adr, 0);
+	ret = WAIT_TIMEOUT(map, chip, cmd_adr, 0, 0);
 	if (ret) {
 		/* Argh. Not ready for write to buffer */
 		map_word Xstatus = map_read(map, cmd_adr);
@@ -1640,7 +1675,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 
 	/* Figure out the number of words to write */
 	word_gap = (-adr & (map_bankwidth(map)-1));
-	words = (len - word_gap + map_bankwidth(map) - 1) / map_bankwidth(map);
+	words = DIV_ROUND_UP(len - word_gap, map_bankwidth(map));
 	if (!word_gap) {
 		words--;
 	} else {
@@ -1692,7 +1727,8 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 
 	ret = INVAL_CACHE_AND_WAIT(map, chip, cmd_adr,
 				   initial_adr, initial_len,
-				   chip->buffer_write_time);
+				   chip->buffer_write_time,
+				   chip->buffer_write_time_max);
 	if (ret) {
 		map_write(map, CMD(0x70), cmd_adr);
 		chip->state = FL_STATUS;
@@ -1827,7 +1863,8 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
 
 	ret = INVAL_CACHE_AND_WAIT(map, chip, adr,
 				   adr, len,
-				   chip->erase_time);
+				   chip->erase_time,
+				   chip->erase_time_max);
 	if (ret) {
 		map_write(map, CMD(0x70), adr);
 		chip->state = FL_STATUS;
@@ -2006,7 +2043,7 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip
 	 */
 	udelay = (!extp || !(extp->FeatureSupport & (1 << 5))) ? 1000000/HZ : 0;
 
-	ret = WAIT_TIMEOUT(map, chip, adr, udelay);
+	ret = WAIT_TIMEOUT(map, chip, adr, udelay, udelay * 100);
 	if (ret) {
 		map_write(map, CMD(0x70), adr);
 		chip->state = FL_STATUS;
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index a972cc6be436..3e6f5d8609e8 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -13,6 +13,8 @@
  * XIP support hooks by Vitaly Wool (based on code for Intel flash
  * by Nicolas Pitre)
  *
+ * 25/09/2008 Christopher Moore: TopBottom fixup for many Macronix with CFI V1.0
+ *
  * Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com
  *
  * This code is GPL
@@ -43,6 +45,7 @@
 
 #define MANUFACTURER_AMD	0x0001
 #define MANUFACTURER_ATMEL	0x001F
+#define MANUFACTURER_MACRONIX	0x00C2
 #define MANUFACTURER_SST	0x00BF
 #define SST49LF004B	        0x0060
 #define SST49LF040B	        0x0050
@@ -144,12 +147,44 @@ static void fixup_amd_bootblock(struct mtd_info *mtd, void* param)
 
 	if (((major << 8) | minor) < 0x3131) {
 		/* CFI version 1.0 => don't trust bootloc */
+
+		DEBUG(MTD_DEBUG_LEVEL1,
+			"%s: JEDEC Vendor ID is 0x%02X Device ID is 0x%02X\n",
+			map->name, cfi->mfr, cfi->id);
+
+		/* AFAICS all 29LV400 with a bottom boot block have a device ID
+		 * of 0x22BA in 16-bit mode and 0xBA in 8-bit mode.
+		 * These were badly detected as they have the 0x80 bit set
+		 * so treat them as a special case.
+		 */
+		if (((cfi->id == 0xBA) || (cfi->id == 0x22BA)) &&
+
+			/* Macronix added CFI to their 2nd generation
+			 * MX29LV400C B/T but AFAICS no other 29LV400 (AMD,
+			 * Fujitsu, Spansion, EON, ESI and older Macronix)
+			 * has CFI.
+			 *
+			 * Therefore also check the manufacturer.
+			 * This reduces the risk of false detection due to
+			 * the 8-bit device ID.
+			 */
+			(cfi->mfr == MANUFACTURER_MACRONIX)) {
+			DEBUG(MTD_DEBUG_LEVEL1,
+				"%s: Macronix MX29LV400C with bottom boot block"
+				" detected\n", map->name);
+			extp->TopBottom = 2;	/* bottom boot */
+		} else
 		if (cfi->id & 0x80) {
 			printk(KERN_WARNING "%s: JEDEC Device ID is 0x%02X. Assuming broken CFI table.\n", map->name, cfi->id);
 			extp->TopBottom = 3;	/* top boot */
 		} else {
 			extp->TopBottom = 2;	/* bottom boot */
 		}
+
+		DEBUG(MTD_DEBUG_LEVEL1,
+			"%s: AMD CFI PRI V%c.%c has no boot block field;"
+			" deduced %s from Device ID\n", map->name, major, minor,
+			extp->TopBottom == 2 ? "bottom" : "top");
 	}
 }
 #endif
@@ -178,10 +213,18 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
 	if (atmel_pri.Features & 0x02)
 		extp->EraseSuspend = 2;
 
-	if (atmel_pri.BottomBoot)
-		extp->TopBottom = 2;
-	else
-		extp->TopBottom = 3;
+	/* Some chips got it backwards... */
+	if (cfi->id == AT49BV6416) {
+		if (atmel_pri.BottomBoot)
+			extp->TopBottom = 3;
+		else
+			extp->TopBottom = 2;
+	} else {
+		if (atmel_pri.BottomBoot)
+			extp->TopBottom = 2;
+		else
+			extp->TopBottom = 3;
+	}
 
 	/* burst write mode not supported */
 	cfi->cfiq->BufWriteTimeoutTyp = 0;
@@ -243,6 +286,7 @@ static struct cfi_fixup cfi_fixup_table[] = {
 	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
 #ifdef AMD_BOOTLOC_BUG
 	{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
+	{ MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_amd_bootblock, NULL },
 #endif
 	{ CFI_MFR_AMD, 0x0050, fixup_use_secsi, NULL, },
 	{ CFI_MFR_AMD, 0x0053, fixup_use_secsi, NULL, },
diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c
index c418e92e1d92..e63e6749429a 100644
--- a/drivers/mtd/chips/cfi_probe.c
+++ b/drivers/mtd/chips/cfi_probe.c
@@ -44,17 +44,14 @@ do { \
 
 #define xip_enable(base, map, cfi) \
 do { \
-	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \
-	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \
+	cfi_qry_mode_off(base, map, cfi);		\
 	xip_allowed(base, map); \
 } while (0)
 
 #define xip_disable_qry(base, map, cfi) \
 do { \
 	xip_disable(); \
-	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \
-	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \
-	cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); \
+	cfi_qry_mode_on(base, map, cfi); \
 } while (0)
 
 #else
@@ -70,32 +67,6 @@ do { \
    in: interleave,type,mode
    ret: table index, <0 for error
  */
-static int __xipram qry_present(struct map_info *map, __u32 base,
-				struct cfi_private *cfi)
-{
-	int osf = cfi->interleave * cfi->device_type;	// scale factor
-	map_word val[3];
-	map_word qry[3];
-
-	qry[0] = cfi_build_cmd('Q', map, cfi);
-	qry[1] = cfi_build_cmd('R', map, cfi);
-	qry[2] = cfi_build_cmd('Y', map, cfi);
-
-	val[0] = map_read(map, base + osf*0x10);
-	val[1] = map_read(map, base + osf*0x11);
-	val[2] = map_read(map, base + osf*0x12);
-
-	if (!map_word_equal(map, qry[0], val[0]))
-		return 0;
-
-	if (!map_word_equal(map, qry[1], val[1]))
-		return 0;
-
-	if (!map_word_equal(map, qry[2], val[2]))
-		return 0;
-
-	return 1; 	// "QRY" found
-}
 
 static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
 				   unsigned long *chip_map, struct cfi_private *cfi)
@@ -116,11 +87,7 @@ static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
 	}
 
 	xip_disable();
-	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
-	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
-	cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
-
-	if (!qry_present(map,base,cfi)) {
+	if (!cfi_qry_mode_on(base, map, cfi)) {
 		xip_enable(base, map, cfi);
 		return 0;
 	}
@@ -141,14 +108,13 @@ static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
  		start = i << cfi->chipshift;
 		/* This chip should be in read mode if it's one
 		   we've already touched. */
-		if (qry_present(map, start, cfi)) {
+		if (cfi_qry_present(map, start, cfi)) {
 			/* Eep. This chip also had the QRY marker.
 			 * Is it an alias for the new one? */
-			cfi_send_gen_cmd(0xF0, 0, start, map, cfi, cfi->device_type, NULL);
-			cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL);
+			cfi_qry_mode_off(start, map, cfi);
 
 			/* If the QRY marker goes away, it's an alias */
-			if (!qry_present(map, start, cfi)) {
+			if (!cfi_qry_present(map, start, cfi)) {
 				xip_allowed(base, map);
 				printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
 				       map->name, base, start);
@@ -158,10 +124,9 @@ static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
 			 * unfortunate. Stick the new chip in read mode
 			 * too and if it's the same, assume it's an alias. */
 			/* FIXME: Use other modes to do a proper check */
-			cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
-			cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL);
+			cfi_qry_mode_off(base, map, cfi);
 
-			if (qry_present(map, base, cfi)) {
+			if (cfi_qry_present(map, base, cfi)) {
 				xip_allowed(base, map);
 				printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
 				       map->name, base, start);
@@ -176,8 +141,7 @@ static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
 	cfi->numchips++;
 
 	/* Put it back into Read Mode */
-	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
-	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_qry_mode_off(base, map, cfi);
 	xip_allowed(base, map);
 
 	printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
@@ -237,9 +201,7 @@ static int __xipram cfi_chip_setup(struct map_info *map,
 			  cfi_read_query(map, base + 0xf * ofs_factor);
 
 	/* Put it back into Read Mode */
-	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
-	/* ... even if it's an Intel chip */
-	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_qry_mode_off(base, map, cfi);
 	xip_allowed(base, map);
 
 	/* Do any necessary byteswapping */
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index 0ee457018016..34d40e25d312 100644
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -24,6 +24,66 @@
 #include <linux/mtd/cfi.h>
 #include <linux/mtd/compatmac.h>
 
+int __xipram cfi_qry_present(struct map_info *map, __u32 base,
+			     struct cfi_private *cfi)
+{
+	int osf = cfi->interleave * cfi->device_type;	/* scale factor */
+	map_word val[3];
+	map_word qry[3];
+
+	qry[0] = cfi_build_cmd('Q', map, cfi);
+	qry[1] = cfi_build_cmd('R', map, cfi);
+	qry[2] = cfi_build_cmd('Y', map, cfi);
+
+	val[0] = map_read(map, base + osf*0x10);
+	val[1] = map_read(map, base + osf*0x11);
+	val[2] = map_read(map, base + osf*0x12);
+
+	if (!map_word_equal(map, qry[0], val[0]))
+		return 0;
+
+	if (!map_word_equal(map, qry[1], val[1]))
+		return 0;
+
+	if (!map_word_equal(map, qry[2], val[2]))
+		return 0;
+
+	return 1; 	/* "QRY" found */
+}
+EXPORT_SYMBOL_GPL(cfi_qry_present);
+
+int __xipram cfi_qry_mode_on(uint32_t base, struct map_info *map,
+			     struct cfi_private *cfi)
+{
+	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
+	if (cfi_qry_present(map, base, cfi))
+		return 1;
+	/* QRY not found probably we deal with some odd CFI chips */
+	/* Some revisions of some old Intel chips? */
+	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
+	if (cfi_qry_present(map, base, cfi))
+		return 1;
+	/* ST M29DW chips */
+	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x98, 0x555, base, map, cfi, cfi->device_type, NULL);
+	if (cfi_qry_present(map, base, cfi))
+		return 1;
+	/* QRY not found */
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cfi_qry_mode_on);
+
+void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map,
+			       struct cfi_private *cfi)
+{
+	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+}
+EXPORT_SYMBOL_GPL(cfi_qry_mode_off);
+
 struct cfi_extquery *
 __xipram cfi_read_pri(struct map_info *map, __u16 adr, __u16 size, const char* name)
 {
@@ -48,8 +108,7 @@ __xipram cfi_read_pri(struct map_info *map, __u16 adr, __u16 size, const char* n
 #endif
 
 	/* Switch it into Query Mode */
-	cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
-
+	cfi_qry_mode_on(base, map, cfi);
 	/* Read in the Extended Query Table */
 	for (i=0; i<size; i++) {
 		((unsigned char *)extp)[i] =
@@ -57,8 +116,7 @@ __xipram cfi_read_pri(struct map_info *map, __u16 adr, __u16 size, const char* n
 	}
 
 	/* Make sure it returns to read mode */
-	cfi_send_gen_cmd(0xf0, 0, base, map, cfi, cfi->device_type, NULL);
-	cfi_send_gen_cmd(0xff, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_qry_mode_off(base, map, cfi);
 
 #ifdef CONFIG_MTD_XIP
 	(void) map_read(map, base);
diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c
index f061885b2812..e2dc96441e05 100644
--- a/drivers/mtd/chips/gen_probe.c
+++ b/drivers/mtd/chips/gen_probe.c
@@ -111,7 +111,7 @@ static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chi
 		max_chips = 1;
 	}
 
-	mapsize = sizeof(long) * ( (max_chips + BITS_PER_LONG-1) / BITS_PER_LONG );
+	mapsize = sizeof(long) * DIV_ROUND_UP(max_chips, BITS_PER_LONG);
 	chip_map = kzalloc(mapsize, GFP_KERNEL);
 	if (!chip_map) {
 		printk(KERN_WARNING "%s: kmalloc failed for CFI chip map\n", map->name);
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index 71bc07f149b7..50a340388e74 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -7,6 +7,7 @@
  *
  * mtdparts=<mtddef>[;<mtddef]
  * <mtddef>  := <mtd-id>:<partdef>[,<partdef>]
+ *              where <mtd-id> is the name from the "cat /proc/mtd" command
  * <partdef> := <size>[@offset][<name>][ro][lk]
  * <mtd-id>  := unique name used in mapping driver/device (mtd->name)
  * <size>    := standard linux memsize OR "-" to denote all remaining space
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 9c613f06623c..6fde0a2e3567 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -59,6 +59,27 @@ config MTD_DATAFLASH
 	  Sometimes DataFlash chips are packaged inside MMC-format
 	  cards; at this writing, the MMC stack won't handle those.
 
+config MTD_DATAFLASH_WRITE_VERIFY
+	bool "Verify DataFlash page writes"
+	depends on MTD_DATAFLASH
+	help
+	  This adds an extra check when data is written to the flash.
+	  It may help if you are verifying chip setup (timings etc) on
+	  your board.  There is a rare possibility that even though the
+	  device thinks the write was successful, a bit could have been
+	  flipped accidentally due to device wear or something else.
+
+config MTD_DATAFLASH_OTP
+	bool "DataFlash OTP support (Security Register)"
+	depends on MTD_DATAFLASH
+	select HAVE_MTD_OTP
+	help
+	  Newer DataFlash chips (revisions C and D) support 128 bytes of
+	  one-time-programmable (OTP) data.  The first half may be written
+	  (once) with up to 64 bytes of data, such as a serial number or
+	  other key product data.  The second half is programmed with a
+	  unique-to-each-chip bit pattern at the factory.
+
 config MTD_M25P80
 	tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
 	depends on SPI_MASTER && EXPERIMENTAL
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index b35c3333e210..76a76751da36 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -39,6 +39,7 @@
 #define	OPCODE_PP		0x02	/* Page program (up to 256 bytes) */
 #define	OPCODE_BE_4K 		0x20	/* Erase 4KiB block */
 #define	OPCODE_BE_32K		0x52	/* Erase 32KiB block */
+#define	OPCODE_BE		0xc7	/* Erase whole flash block */
 #define	OPCODE_SE		0xd8	/* Sector erase (usually 64KiB) */
 #define	OPCODE_RDID		0x9f	/* Read JEDEC ID */
 
@@ -161,6 +162,31 @@ static int wait_till_ready(struct m25p *flash)
 	return 1;
 }
 
+/*
+ * Erase the whole flash memory
+ *
+ * Returns 0 if successful, non-zero otherwise.
+ */
+static int erase_block(struct m25p *flash)
+{
+	DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB\n",
+			flash->spi->dev.bus_id, __func__,
+			flash->mtd.size / 1024);
+
+	/* Wait until finished previous write command. */
+	if (wait_till_ready(flash))
+		return 1;
+
+	/* Send write enable, then erase commands. */
+	write_enable(flash);
+
+	/* Set up command buffer. */
+	flash->command[0] = OPCODE_BE;
+
+	spi_write(flash->spi, flash->command, 1);
+
+	return 0;
+}
 
 /*
  * Erase one sector of flash memory at offset ``offset'' which is any
@@ -229,15 +255,21 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
 	 */
 
 	/* now erase those sectors */
-	while (len) {
-		if (erase_sector(flash, addr)) {
-			instr->state = MTD_ERASE_FAILED;
-			mutex_unlock(&flash->lock);
-			return -EIO;
-		}
+	if (len == flash->mtd.size && erase_block(flash)) {
+		instr->state = MTD_ERASE_FAILED;
+		mutex_unlock(&flash->lock);
+		return -EIO;
+	} else {
+		while (len) {
+			if (erase_sector(flash, addr)) {
+				instr->state = MTD_ERASE_FAILED;
+				mutex_unlock(&flash->lock);
+				return -EIO;
+			}
 
-		addr += mtd->erasesize;
-		len -= mtd->erasesize;
+			addr += mtd->erasesize;
+			len -= mtd->erasesize;
+		}
 	}
 
 	mutex_unlock(&flash->lock);
@@ -437,6 +469,7 @@ struct flash_info {
 	 * then a two byte device id.
 	 */
 	u32		jedec_id;
+	u16             ext_id;
 
 	/* The size listed here is what works with OPCODE_SE, which isn't
 	 * necessarily called a "sector" by the vendor.
@@ -456,72 +489,75 @@ struct flash_info {
 static struct flash_info __devinitdata m25p_data [] = {
 
 	/* Atmel -- some are (confusingly) marketed as "DataFlash" */
-	{ "at25fs010",  0x1f6601, 32 * 1024, 4, SECT_4K, },
-	{ "at25fs040",  0x1f6604, 64 * 1024, 8, SECT_4K, },
+	{ "at25fs010",  0x1f6601, 0, 32 * 1024, 4, SECT_4K, },
+	{ "at25fs040",  0x1f6604, 0, 64 * 1024, 8, SECT_4K, },
 
-	{ "at25df041a", 0x1f4401, 64 * 1024, 8, SECT_4K, },
-	{ "at25df641",  0x1f4800, 64 * 1024, 128, SECT_4K, },
+	{ "at25df041a", 0x1f4401, 0, 64 * 1024, 8, SECT_4K, },
+	{ "at25df641",  0x1f4800, 0, 64 * 1024, 128, SECT_4K, },
 
-	{ "at26f004",   0x1f0400, 64 * 1024, 8, SECT_4K, },
-	{ "at26df081a", 0x1f4501, 64 * 1024, 16, SECT_4K, },
-	{ "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, },
-	{ "at26df321",  0x1f4701, 64 * 1024, 64, SECT_4K, },
+	{ "at26f004",   0x1f0400, 0, 64 * 1024, 8, SECT_4K, },
+	{ "at26df081a", 0x1f4501, 0, 64 * 1024, 16, SECT_4K, },
+	{ "at26df161a", 0x1f4601, 0, 64 * 1024, 32, SECT_4K, },
+	{ "at26df321",  0x1f4701, 0, 64 * 1024, 64, SECT_4K, },
 
 	/* Spansion -- single (large) sector size only, at least
 	 * for the chips listed here (without boot sectors).
 	 */
-	{ "s25sl004a", 0x010212, 64 * 1024, 8, },
-	{ "s25sl008a", 0x010213, 64 * 1024, 16, },
-	{ "s25sl016a", 0x010214, 64 * 1024, 32, },
-	{ "s25sl032a", 0x010215, 64 * 1024, 64, },
-	{ "s25sl064a", 0x010216, 64 * 1024, 128, },
+	{ "s25sl004a", 0x010212, 0, 64 * 1024, 8, },
+	{ "s25sl008a", 0x010213, 0, 64 * 1024, 16, },
+	{ "s25sl016a", 0x010214, 0, 64 * 1024, 32, },
+	{ "s25sl032a", 0x010215, 0, 64 * 1024, 64, },
+	{ "s25sl064a", 0x010216, 0, 64 * 1024, 128, },
+        { "s25sl12800", 0x012018, 0x0300, 256 * 1024, 64, },
+	{ "s25sl12801", 0x012018, 0x0301, 64 * 1024, 256, },
 
 	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
-	{ "sst25vf040b", 0xbf258d, 64 * 1024, 8, SECT_4K, },
-	{ "sst25vf080b", 0xbf258e, 64 * 1024, 16, SECT_4K, },
-	{ "sst25vf016b", 0xbf2541, 64 * 1024, 32, SECT_4K, },
-	{ "sst25vf032b", 0xbf254a, 64 * 1024, 64, SECT_4K, },
+	{ "sst25vf040b", 0xbf258d, 0, 64 * 1024, 8, SECT_4K, },
+	{ "sst25vf080b", 0xbf258e, 0, 64 * 1024, 16, SECT_4K, },
+	{ "sst25vf016b", 0xbf2541, 0, 64 * 1024, 32, SECT_4K, },
+	{ "sst25vf032b", 0xbf254a, 0, 64 * 1024, 64, SECT_4K, },
 
 	/* ST Microelectronics -- newer production may have feature updates */
-	{ "m25p05",  0x202010,  32 * 1024, 2, },
-	{ "m25p10",  0x202011,  32 * 1024, 4, },
-	{ "m25p20",  0x202012,  64 * 1024, 4, },
-	{ "m25p40",  0x202013,  64 * 1024, 8, },
-	{ "m25p80",         0,  64 * 1024, 16, },
-	{ "m25p16",  0x202015,  64 * 1024, 32, },
-	{ "m25p32",  0x202016,  64 * 1024, 64, },
-	{ "m25p64",  0x202017,  64 * 1024, 128, },
-	{ "m25p128", 0x202018, 256 * 1024, 64, },
-
-	{ "m45pe80", 0x204014,  64 * 1024, 16, },
-	{ "m45pe16", 0x204015,  64 * 1024, 32, },
-
-	{ "m25pe80", 0x208014,  64 * 1024, 16, },
-	{ "m25pe16", 0x208015,  64 * 1024, 32, SECT_4K, },
+	{ "m25p05",  0x202010,  0, 32 * 1024, 2, },
+	{ "m25p10",  0x202011,  0, 32 * 1024, 4, },
+	{ "m25p20",  0x202012,  0, 64 * 1024, 4, },
+	{ "m25p40",  0x202013,  0, 64 * 1024, 8, },
+	{ "m25p80",         0,  0, 64 * 1024, 16, },
+	{ "m25p16",  0x202015,  0, 64 * 1024, 32, },
+	{ "m25p32",  0x202016,  0, 64 * 1024, 64, },
+	{ "m25p64",  0x202017,  0, 64 * 1024, 128, },
+	{ "m25p128", 0x202018, 0, 256 * 1024, 64, },
+
+	{ "m45pe80", 0x204014,  0, 64 * 1024, 16, },
+	{ "m45pe16", 0x204015,  0, 64 * 1024, 32, },
+
+	{ "m25pe80", 0x208014,  0, 64 * 1024, 16, },
+	{ "m25pe16", 0x208015,  0, 64 * 1024, 32, SECT_4K, },
 
 	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
-	{ "w25x10", 0xef3011, 64 * 1024, 2, SECT_4K, },
-	{ "w25x20", 0xef3012, 64 * 1024, 4, SECT_4K, },
-	{ "w25x40", 0xef3013, 64 * 1024, 8, SECT_4K, },
-	{ "w25x80", 0xef3014, 64 * 1024, 16, SECT_4K, },
-	{ "w25x16", 0xef3015, 64 * 1024, 32, SECT_4K, },
-	{ "w25x32", 0xef3016, 64 * 1024, 64, SECT_4K, },
-	{ "w25x64", 0xef3017, 64 * 1024, 128, SECT_4K, },
+	{ "w25x10", 0xef3011, 0, 64 * 1024, 2, SECT_4K, },
+	{ "w25x20", 0xef3012, 0, 64 * 1024, 4, SECT_4K, },
+	{ "w25x40", 0xef3013, 0, 64 * 1024, 8, SECT_4K, },
+	{ "w25x80", 0xef3014, 0, 64 * 1024, 16, SECT_4K, },
+	{ "w25x16", 0xef3015, 0, 64 * 1024, 32, SECT_4K, },
+	{ "w25x32", 0xef3016, 0, 64 * 1024, 64, SECT_4K, },
+	{ "w25x64", 0xef3017, 0, 64 * 1024, 128, SECT_4K, },
 };
 
 static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
 {
 	int			tmp;
 	u8			code = OPCODE_RDID;
-	u8			id[3];
+	u8			id[5];
 	u32			jedec;
+	u16                     ext_jedec;
 	struct flash_info	*info;
 
 	/* JEDEC also defines an optional "extended device information"
 	 * string for after vendor-specific data, after the three bytes
 	 * we use here.  Supporting some chips might require using it.
 	 */
-	tmp = spi_write_then_read(spi, &code, 1, id, 3);
+	tmp = spi_write_then_read(spi, &code, 1, id, 5);
 	if (tmp < 0) {
 		DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
 			spi->dev.bus_id, tmp);
@@ -533,10 +569,14 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
 	jedec = jedec << 8;
 	jedec |= id[2];
 
+	ext_jedec = id[3] << 8 | id[4];
+
 	for (tmp = 0, info = m25p_data;
 			tmp < ARRAY_SIZE(m25p_data);
 			tmp++, info++) {
 		if (info->jedec_id == jedec)
+			if (ext_jedec != 0 && info->ext_id != ext_jedec)
+				continue;
 			return info;
 	}
 	dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec);
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 8bd0dea6885f..6dd9aff8bb2d 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -30,12 +30,10 @@
  * doesn't (yet) use these for any kind of i/o overlap or prefetching.
  *
  * Sometimes DataFlash is packaged in MMC-format cards, although the
- * MMC stack can't use SPI (yet), or distinguish between MMC and DataFlash
+ * MMC stack can't (yet?) distinguish between MMC and DataFlash
  * protocols during enumeration.
  */
 
-#define CONFIG_DATAFLASH_WRITE_VERIFY
-
 /* reads can bypass the buffers */
 #define OP_READ_CONTINUOUS	0xE8
 #define OP_READ_PAGE		0xD2
@@ -80,7 +78,8 @@
  */
 #define OP_READ_ID		0x9F
 #define OP_READ_SECURITY	0x77
-#define OP_WRITE_SECURITY	0x9A	/* OTP bits */
+#define OP_WRITE_SECURITY_REVC	0x9A
+#define OP_WRITE_SECURITY	0x9B	/* revision D */
 
 
 struct dataflash {
@@ -402,7 +401,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 		(void) dataflash_waitready(priv->spi);
 
 
-#ifdef	CONFIG_DATAFLASH_WRITE_VERIFY
+#ifdef CONFIG_MTD_DATAFLASH_VERIFY_WRITE
 
 		/* (3) Compare to Buffer1 */
 		addr = pageaddr << priv->page_offset;
@@ -431,7 +430,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 		} else
 			status = 0;
 
-#endif	/* CONFIG_DATAFLASH_WRITE_VERIFY */
+#endif	/* CONFIG_MTD_DATAFLASH_VERIFY_WRITE */
 
 		remaining = remaining - writelen;
 		pageaddr++;
@@ -451,16 +450,192 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 
 /* ......................................................................... */
 
+#ifdef CONFIG_MTD_DATAFLASH_OTP
+
+static int dataflash_get_otp_info(struct mtd_info *mtd,
+		struct otp_info *info, size_t len)
+{
+	/* Report both blocks as identical:  bytes 0..64, locked.
+	 * Unless the user block changed from all-ones, we can't
+	 * tell whether it's still writable; so we assume it isn't.
+	 */
+	info->start = 0;
+	info->length = 64;
+	info->locked = 1;
+	return sizeof(*info);
+}
+
+static ssize_t otp_read(struct spi_device *spi, unsigned base,
+		uint8_t *buf, loff_t off, size_t len)
+{
+	struct spi_message	m;
+	size_t			l;
+	uint8_t			*scratch;
+	struct spi_transfer	t;
+	int			status;
+
+	if (off > 64)
+		return -EINVAL;
+
+	if ((off + len) > 64)
+		len = 64 - off;
+	if (len == 0)
+		return len;
+
+	spi_message_init(&m);
+
+	l = 4 + base + off + len;
+	scratch = kzalloc(l, GFP_KERNEL);
+	if (!scratch)
+		return -ENOMEM;
+
+	/* OUT: OP_READ_SECURITY, 3 don't-care bytes, zeroes
+	 * IN:  ignore 4 bytes, data bytes 0..N (max 127)
+	 */
+	scratch[0] = OP_READ_SECURITY;
+
+	memset(&t, 0, sizeof t);
+	t.tx_buf = scratch;
+	t.rx_buf = scratch;
+	t.len = l;
+	spi_message_add_tail(&t, &m);
+
+	dataflash_waitready(spi);
+
+	status = spi_sync(spi, &m);
+	if (status >= 0) {
+		memcpy(buf, scratch + 4 + base + off, len);
+		status = len;
+	}
+
+	kfree(scratch);
+	return status;
+}
+
+static int dataflash_read_fact_otp(struct mtd_info *mtd,
+		loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+	struct dataflash	*priv = (struct dataflash *)mtd->priv;
+	int			status;
+
+	/* 64 bytes, from 0..63 ... start at 64 on-chip */
+	mutex_lock(&priv->lock);
+	status = otp_read(priv->spi, 64, buf, from, len);
+	mutex_unlock(&priv->lock);
+
+	if (status < 0)
+		return status;
+	*retlen = status;
+	return 0;
+}
+
+static int dataflash_read_user_otp(struct mtd_info *mtd,
+		loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+	struct dataflash	*priv = (struct dataflash *)mtd->priv;
+	int			status;
+
+	/* 64 bytes, from 0..63 ... start at 0 on-chip */
+	mutex_lock(&priv->lock);
+	status = otp_read(priv->spi, 0, buf, from, len);
+	mutex_unlock(&priv->lock);
+
+	if (status < 0)
+		return status;
+	*retlen = status;
+	return 0;
+}
+
+static int dataflash_write_user_otp(struct mtd_info *mtd,
+		loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+	struct spi_message	m;
+	const size_t		l = 4 + 64;
+	uint8_t			*scratch;
+	struct spi_transfer	t;
+	struct dataflash	*priv = (struct dataflash *)mtd->priv;
+	int			status;
+
+	if (len > 64)
+		return -EINVAL;
+
+	/* Strictly speaking, we *could* truncate the write ... but
+	 * let's not do that for the only write that's ever possible.
+	 */
+	if ((from + len) > 64)
+		return -EINVAL;
+
+	/* OUT: OP_WRITE_SECURITY, 3 zeroes, 64 data-or-zero bytes
+	 * IN:  ignore all
+	 */
+	scratch = kzalloc(l, GFP_KERNEL);
+	if (!scratch)
+		return -ENOMEM;
+	scratch[0] = OP_WRITE_SECURITY;
+	memcpy(scratch + 4 + from, buf, len);
+
+	spi_message_init(&m);
+
+	memset(&t, 0, sizeof t);
+	t.tx_buf = scratch;
+	t.len = l;
+	spi_message_add_tail(&t, &m);
+
+	/* Write the OTP bits, if they've not yet been written.
+	 * This modifies SRAM buffer1.
+	 */
+	mutex_lock(&priv->lock);
+	dataflash_waitready(priv->spi);
+	status = spi_sync(priv->spi, &m);
+	mutex_unlock(&priv->lock);
+
+	kfree(scratch);
+
+	if (status >= 0) {
+		status = 0;
+		*retlen = len;
+	}
+	return status;
+}
+
+static char *otp_setup(struct mtd_info *device, char revision)
+{
+	device->get_fact_prot_info = dataflash_get_otp_info;
+	device->read_fact_prot_reg = dataflash_read_fact_otp;
+	device->get_user_prot_info = dataflash_get_otp_info;
+	device->read_user_prot_reg = dataflash_read_user_otp;
+
+	/* rev c parts (at45db321c and at45db1281 only!) use a
+	 * different write procedure; not (yet?) implemented.
+	 */
+	if (revision > 'c')
+		device->write_user_prot_reg = dataflash_write_user_otp;
+
+	return ", OTP";
+}
+
+#else
+
+static char *otp_setup(struct mtd_info *device, char revision)
+{
+	return " (OTP)";
+}
+
+#endif
+
+/* ......................................................................... */
+
 /*
  * Register DataFlash device with MTD subsystem.
  */
 static int __devinit
-add_dataflash(struct spi_device *spi, char *name,
-		int nr_pages, int pagesize, int pageoffset)
+add_dataflash_otp(struct spi_device *spi, char *name,
+		int nr_pages, int pagesize, int pageoffset, char revision)
 {
 	struct dataflash		*priv;
 	struct mtd_info			*device;
 	struct flash_platform_data	*pdata = spi->dev.platform_data;
+	char				*otp_tag = "";
 
 	priv = kzalloc(sizeof *priv, GFP_KERNEL);
 	if (!priv)
@@ -489,8 +664,12 @@ add_dataflash(struct spi_device *spi, char *name,
 	device->write = dataflash_write;
 	device->priv = priv;
 
-	dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes\n",
-			name, DIV_ROUND_UP(device->size, 1024), pagesize);
+	if (revision >= 'c')
+		otp_tag = otp_setup(device, revision);
+
+	dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes%s\n",
+			name, DIV_ROUND_UP(device->size, 1024),
+			pagesize, otp_tag);
 	dev_set_drvdata(&spi->dev, priv);
 
 	if (mtd_has_partitions()) {
@@ -519,6 +698,14 @@ add_dataflash(struct spi_device *spi, char *name,
 	return add_mtd_device(device) == 1 ? -ENODEV : 0;
 }
 
+static inline int __devinit
+add_dataflash(struct spi_device *spi, char *name,
+		int nr_pages, int pagesize, int pageoffset)
+{
+	return add_dataflash_otp(spi, name, nr_pages, pagesize,
+			pageoffset, 0);
+}
+
 struct flash_info {
 	char		*name;
 
@@ -664,13 +851,16 @@ static int __devinit dataflash_probe(struct spi_device *spi)
 	 * Try to detect dataflash by JEDEC ID.
 	 * If it succeeds we know we have either a C or D part.
 	 * D will support power of 2 pagesize option.
+	 * Both support the security register, though with different
+	 * write procedures.
 	 */
 	info = jedec_probe(spi);
 	if (IS_ERR(info))
 		return PTR_ERR(info);
 	if (info != NULL)
-		return add_dataflash(spi, info->name, info->nr_pages,
-				 info->pagesize, info->pageoffset);
+		return add_dataflash_otp(spi, info->name, info->nr_pages,
+				info->pagesize, info->pageoffset,
+				(info->flags & SUP_POW2PS) ? 'd' : 'c');
 
 	/*
 	 * Older chips support only legacy commands, identifing
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index c4f9d3378b24..50ce13887f63 100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -388,6 +388,10 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned
 		if (thisEUN == targetEUN)
 			break;
 
+		/* Unlink the last block from the chain. */
+		inftl->PUtable[prevEUN] = BLOCK_NIL;
+
+		/* Now try to erase it. */
 		if (INFTL_formatblock(inftl, thisEUN) < 0) {
 			/*
 			 * Could not erase : mark block as reserved.
@@ -396,7 +400,6 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned
 		} else {
 			/* Correctly erased : mark it as free */
 			inftl->PUtable[thisEUN] = BLOCK_FREE;
-			inftl->PUtable[prevEUN] = BLOCK_NIL;
 			inftl->numfreeEUNs++;
 		}
 	}
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index df8e00bba07b..5ea169362164 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -332,30 +332,6 @@ config MTD_CFI_FLAGADM
 	  Mapping for the Flaga digital module. If you don't have one, ignore
 	  this setting.
 
-config MTD_WALNUT
-	tristate "Flash device mapped on IBM 405GP Walnut"
-	depends on MTD_JEDECPROBE && WALNUT && !PPC_MERGE
-	help
-	  This enables access routines for the flash chips on the IBM 405GP
-	  Walnut board. If you have one of these boards and would like to
-	  use the flash chips on it, say 'Y'.
-
-config MTD_EBONY
-	tristate "Flash devices mapped on IBM 440GP Ebony"
-	depends on MTD_JEDECPROBE && EBONY && !PPC_MERGE
-	help
-	  This enables access routines for the flash chips on the IBM 440GP
-	  Ebony board. If you have one of these boards and would like to
-	  use the flash chips on it, say 'Y'.
-
-config MTD_OCOTEA
-	tristate "Flash devices mapped on IBM 440GX Ocotea"
-	depends on MTD_CFI && OCOTEA && !PPC_MERGE
-	help
-	  This enables access routines for the flash chips on the IBM 440GX
-	  Ocotea board. If you have one of these boards and would like to
-	  use the flash chips on it, say 'Y'.
-
 config MTD_REDWOOD
 	tristate "CFI Flash devices mapped on IBM Redwood"
 	depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
@@ -458,13 +434,6 @@ config MTD_CEIVA
 	  PhotoMax Digital Picture Frame.
 	  If you have such a device, say 'Y'.
 
-config MTD_NOR_TOTO
-	tristate "NOR Flash device on TOTO board"
-	depends on ARCH_OMAP && OMAP_TOTO
-	help
-	  This enables access to the NOR flash on the Texas Instruments
-	  TOTO board.
-
 config MTD_H720X
 	tristate "Hynix evaluation board mappings"
 	depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
@@ -522,7 +491,7 @@ config MTD_BFIN_ASYNC
 
 config MTD_UCLINUX
 	tristate "Generic uClinux RAM/ROM filesystem support"
-	depends on MTD_PARTITIONS && !MMU
+	depends on MTD_PARTITIONS && MTD_RAM && !MMU
 	help
 	  Map driver to support image based filesystems for uClinux.
 
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 6cda6df973e5..6d9ba35caf11 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -50,12 +50,8 @@ obj-$(CONFIG_MTD_REDWOOD)	+= redwood.o
 obj-$(CONFIG_MTD_UCLINUX)	+= uclinux.o
 obj-$(CONFIG_MTD_NETtel)	+= nettel.o
 obj-$(CONFIG_MTD_SCB2_FLASH)	+= scb2_flash.o
-obj-$(CONFIG_MTD_EBONY)		+= ebony.o
-obj-$(CONFIG_MTD_OCOTEA)	+= ocotea.o
-obj-$(CONFIG_MTD_WALNUT)        += walnut.o
 obj-$(CONFIG_MTD_H720X)		+= h720x-flash.o
 obj-$(CONFIG_MTD_SBC8240)	+= sbc8240.o
-obj-$(CONFIG_MTD_NOR_TOTO)	+= omap-toto-flash.o
 obj-$(CONFIG_MTD_IXP4XX)	+= ixp4xx.o
 obj-$(CONFIG_MTD_IXP2000)	+= ixp2000.o
 obj-$(CONFIG_MTD_WRSBC8260)	+= wr_sbc82xx_flash.o
diff --git a/drivers/mtd/maps/ebony.c b/drivers/mtd/maps/ebony.c
deleted file mode 100644
index d92b7c70d3ed..000000000000
--- a/drivers/mtd/maps/ebony.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * Mapping for Ebony user flash
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2002-2004 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <asm/ibm44x.h>
-#include <platforms/4xx/ebony.h>
-
-static struct mtd_info *flash;
-
-static struct map_info ebony_small_map = {
-	.name =		"Ebony small flash",
-	.size =		EBONY_SMALL_FLASH_SIZE,
-	.bankwidth =	1,
-};
-
-static struct map_info ebony_large_map = {
-	.name =		"Ebony large flash",
-	.size =		EBONY_LARGE_FLASH_SIZE,
-	.bankwidth =	1,
-};
-
-static struct mtd_partition ebony_small_partitions[] = {
-	{
-		.name =   "OpenBIOS",
-		.offset = 0x0,
-		.size =   0x80000,
-	}
-};
-
-static struct mtd_partition ebony_large_partitions[] = {
-	{
-		.name =   "fs",
-		.offset = 0,
-		.size =   0x380000,
-	},
-	{
-		.name =   "firmware",
-		.offset = 0x380000,
-		.size =   0x80000,
-	}
-};
-
-int __init init_ebony(void)
-{
-	u8 fpga0_reg;
-	u8 __iomem *fpga0_adr;
-	unsigned long long small_flash_base, large_flash_base;
-
-	fpga0_adr = ioremap64(EBONY_FPGA_ADDR, 16);
-	if (!fpga0_adr)
-		return -ENOMEM;
-
-	fpga0_reg = readb(fpga0_adr);
-	iounmap(fpga0_adr);
-
-	if (EBONY_BOOT_SMALL_FLASH(fpga0_reg) &&
-			!EBONY_FLASH_SEL(fpga0_reg))
-		small_flash_base = EBONY_SMALL_FLASH_HIGH2;
-	else if (EBONY_BOOT_SMALL_FLASH(fpga0_reg) &&
-			EBONY_FLASH_SEL(fpga0_reg))
-		small_flash_base = EBONY_SMALL_FLASH_HIGH1;
-	else if (!EBONY_BOOT_SMALL_FLASH(fpga0_reg) &&
-			!EBONY_FLASH_SEL(fpga0_reg))
-		small_flash_base = EBONY_SMALL_FLASH_LOW2;
-	else
-		small_flash_base = EBONY_SMALL_FLASH_LOW1;
-
-	if (EBONY_BOOT_SMALL_FLASH(fpga0_reg) &&
-			!EBONY_ONBRD_FLASH_EN(fpga0_reg))
-		large_flash_base = EBONY_LARGE_FLASH_LOW;
-	else
-		large_flash_base = EBONY_LARGE_FLASH_HIGH;
-
-	ebony_small_map.phys = small_flash_base;
-	ebony_small_map.virt = ioremap64(small_flash_base,
-					 ebony_small_map.size);
-
-	if (!ebony_small_map.virt) {
-		printk("Failed to ioremap flash\n");
-		return -EIO;
-	}
-
-	simple_map_init(&ebony_small_map);
-
-	flash = do_map_probe("jedec_probe", &ebony_small_map);
-	if (flash) {
-		flash->owner = THIS_MODULE;
-		add_mtd_partitions(flash, ebony_small_partitions,
-					ARRAY_SIZE(ebony_small_partitions));
-	} else {
-		printk("map probe failed for flash\n");
-		iounmap(ebony_small_map.virt);
-		return -ENXIO;
-	}
-
-	ebony_large_map.phys = large_flash_base;
-	ebony_large_map.virt = ioremap64(large_flash_base,
-					 ebony_large_map.size);
-
-	if (!ebony_large_map.virt) {
-		printk("Failed to ioremap flash\n");
-		iounmap(ebony_small_map.virt);
-		return -EIO;
-	}
-
-	simple_map_init(&ebony_large_map);
-
-	flash = do_map_probe("jedec_probe", &ebony_large_map);
-	if (flash) {
-		flash->owner = THIS_MODULE;
-		add_mtd_partitions(flash, ebony_large_partitions,
-					ARRAY_SIZE(ebony_large_partitions));
-	} else {
-		printk("map probe failed for flash\n");
-		iounmap(ebony_small_map.virt);
-		iounmap(ebony_large_map.virt);
-		return -ENXIO;
-	}
-
-	return 0;
-}
-
-static void __exit cleanup_ebony(void)
-{
-	if (flash) {
-		del_mtd_partitions(flash);
-		map_destroy(flash);
-	}
-
-	if (ebony_small_map.virt) {
-		iounmap(ebony_small_map.virt);
-		ebony_small_map.virt = NULL;
-	}
-
-	if (ebony_large_map.virt) {
-		iounmap(ebony_large_map.virt);
-		ebony_large_map.virt = NULL;
-	}
-}
-
-module_init(init_ebony);
-module_exit(cleanup_ebony);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Matt Porter <mporter@kernel.crashing.org>");
-MODULE_DESCRIPTION("MTD map and partitions for IBM 440GP Ebony boards");
diff --git a/drivers/mtd/maps/ocotea.c b/drivers/mtd/maps/ocotea.c
deleted file mode 100644
index 5522eac8c980..000000000000
--- a/drivers/mtd/maps/ocotea.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * Mapping for Ocotea user flash
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2002-2004 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <asm/ibm44x.h>
-#include <platforms/4xx/ocotea.h>
-
-static struct mtd_info *flash;
-
-static struct map_info ocotea_small_map = {
-	.name =		"Ocotea small flash",
-	.size =		OCOTEA_SMALL_FLASH_SIZE,
-	.buswidth =	1,
-};
-
-static struct map_info ocotea_large_map = {
-	.name =		"Ocotea large flash",
-	.size =		OCOTEA_LARGE_FLASH_SIZE,
-	.buswidth =	1,
-};
-
-static struct mtd_partition ocotea_small_partitions[] = {
-	{
-		.name =   "pibs",
-		.offset = 0x0,
-		.size =   0x100000,
-	}
-};
-
-static struct mtd_partition ocotea_large_partitions[] = {
-	{
-		.name =   "fs",
-		.offset = 0,
-		.size =   0x300000,
-	},
-	{
-		.name =   "firmware",
-		.offset = 0x300000,
-		.size =   0x100000,
-	}
-};
-
-int __init init_ocotea(void)
-{
-	u8 fpga0_reg;
-	u8 *fpga0_adr;
-	unsigned long long small_flash_base, large_flash_base;
-
-	fpga0_adr = ioremap64(OCOTEA_FPGA_ADDR, 16);
-	if (!fpga0_adr)
-		return -ENOMEM;
-
-	fpga0_reg = readb((unsigned long)fpga0_adr);
-	iounmap(fpga0_adr);
-
-	if (OCOTEA_BOOT_LARGE_FLASH(fpga0_reg)) {
-		small_flash_base = OCOTEA_SMALL_FLASH_HIGH;
-		large_flash_base = OCOTEA_LARGE_FLASH_LOW;
-	}
-	else {
-		small_flash_base = OCOTEA_SMALL_FLASH_LOW;
-		large_flash_base = OCOTEA_LARGE_FLASH_HIGH;
-	}
-
-	ocotea_small_map.phys = small_flash_base;
-	ocotea_small_map.virt = ioremap64(small_flash_base,
-					 ocotea_small_map.size);
-
-	if (!ocotea_small_map.virt) {
-		printk("Failed to ioremap flash\n");
-		return -EIO;
-	}
-
-	simple_map_init(&ocotea_small_map);
-
-	flash = do_map_probe("map_rom", &ocotea_small_map);
-	if (flash) {
-		flash->owner = THIS_MODULE;
-		add_mtd_partitions(flash, ocotea_small_partitions,
-					ARRAY_SIZE(ocotea_small_partitions));
-	} else {
-		printk("map probe failed for flash\n");
-		iounmap(ocotea_small_map.virt);
-		return -ENXIO;
-	}
-
-	ocotea_large_map.phys = large_flash_base;
-	ocotea_large_map.virt = ioremap64(large_flash_base,
-					 ocotea_large_map.size);
-
-	if (!ocotea_large_map.virt) {
-		printk("Failed to ioremap flash\n");
-		iounmap(ocotea_small_map.virt);
-		return -EIO;
-	}
-
-	simple_map_init(&ocotea_large_map);
-
-	flash = do_map_probe("cfi_probe", &ocotea_large_map);
-	if (flash) {
-		flash->owner = THIS_MODULE;
-		add_mtd_partitions(flash, ocotea_large_partitions,
-					ARRAY_SIZE(ocotea_large_partitions));
-	} else {
-		printk("map probe failed for flash\n");
-		iounmap(ocotea_small_map.virt);
-		iounmap(ocotea_large_map.virt);
-		return -ENXIO;
-	}
-
-	return 0;
-}
-
-static void __exit cleanup_ocotea(void)
-{
-	if (flash) {
-		del_mtd_partitions(flash);
-		map_destroy(flash);
-	}
-
-	if (ocotea_small_map.virt) {
-		iounmap((void *)ocotea_small_map.virt);
-		ocotea_small_map.virt = 0;
-	}
-
-	if (ocotea_large_map.virt) {
-		iounmap((void *)ocotea_large_map.virt);
-		ocotea_large_map.virt = 0;
-	}
-}
-
-module_init(init_ocotea);
-module_exit(cleanup_ocotea);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Matt Porter <mporter@kernel.crashing.org>");
-MODULE_DESCRIPTION("MTD map and partitions for IBM 440GX Ocotea boards");
diff --git a/drivers/mtd/maps/omap-toto-flash.c b/drivers/mtd/maps/omap-toto-flash.c
deleted file mode 100644
index 0a60ebbc2175..000000000000
--- a/drivers/mtd/maps/omap-toto-flash.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * NOR Flash memory access on TI Toto board
- *
- * jzhang@ti.com (C) 2003 Texas Instruments.
- *
- *  (C) 2002 MontVista Software, Inc.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-
-#ifndef CONFIG_ARCH_OMAP
-#error This is for OMAP architecture only
-#endif
-
-//these lines need be moved to a hardware header file
-#define OMAP_TOTO_FLASH_BASE 0xd8000000
-#define OMAP_TOTO_FLASH_SIZE 0x80000
-
-static struct map_info omap_toto_map_flash = {
-	.name =		"OMAP Toto flash",
-	.bankwidth =	2,
-	.virt =		(void __iomem *)OMAP_TOTO_FLASH_BASE,
-};
-
-
-static struct mtd_partition toto_flash_partitions[] = {
-	{
-		.name =		"BootLoader",
-		.size =		0x00040000,     /* hopefully u-boot will stay 128k + 128*/
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name =		"ReservedSpace",
-		.size =		0x00030000,
-		.offset =	MTDPART_OFS_APPEND,
-		//mask_flags:	MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name =		"EnvArea",      /* bottom 64KiB for env vars */
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	MTDPART_OFS_APPEND,
-	}
-};
-
-static struct mtd_partition *parsed_parts;
-
-static struct mtd_info *flash_mtd;
-
-static int __init init_flash (void)
-{
-
-	struct mtd_partition *parts;
-	int nb_parts = 0;
-	int parsed_nr_parts = 0;
-	const char *part_type;
-
-	/*
-	 * Static partition definition selection
-	 */
-	part_type = "static";
-
- 	parts = toto_flash_partitions;
-	nb_parts = ARRAY_SIZE(toto_flash_partitions);
-	omap_toto_map_flash.size = OMAP_TOTO_FLASH_SIZE;
-	omap_toto_map_flash.phys = virt_to_phys(OMAP_TOTO_FLASH_BASE);
-
-	simple_map_init(&omap_toto_map_flash);
-	/*
-	 * Now let's probe for the actual flash.  Do it here since
-	 * specific machine settings might have been set above.
-	 */
-	printk(KERN_NOTICE "OMAP toto flash: probing %d-bit flash bus\n",
-		omap_toto_map_flash.bankwidth*8);
-	flash_mtd = do_map_probe("jedec_probe", &omap_toto_map_flash);
-	if (!flash_mtd)
-		return -ENXIO;
-
- 	if (parsed_nr_parts > 0) {
-		parts = parsed_parts;
-		nb_parts = parsed_nr_parts;
-	}
-
-	if (nb_parts == 0) {
-		printk(KERN_NOTICE "OMAP toto flash: no partition info available,"
-			"registering whole flash at once\n");
-		if (add_mtd_device(flash_mtd)){
-            return -ENXIO;
-        }
-	} else {
-		printk(KERN_NOTICE "Using %s partition definition\n",
-			part_type);
-		return add_mtd_partitions(flash_mtd, parts, nb_parts);
-	}
-	return 0;
-}
-
-int __init omap_toto_mtd_init(void)
-{
-	int status;
-
- 	if (status = init_flash()) {
-		printk(KERN_ERR "OMAP Toto Flash: unable to init map for toto flash\n");
-	}
-    return status;
-}
-
-static void  __exit omap_toto_mtd_cleanup(void)
-{
-	if (flash_mtd) {
-		del_mtd_partitions(flash_mtd);
-		map_destroy(flash_mtd);
-		kfree(parsed_parts);
-	}
-}
-
-module_init(omap_toto_mtd_init);
-module_exit(omap_toto_mtd_cleanup);
-
-MODULE_AUTHOR("Jian Zhang");
-MODULE_DESCRIPTION("OMAP Toto board map driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
index 5c6a25c90380..48f4cf5cb9d1 100644
--- a/drivers/mtd/maps/pci.c
+++ b/drivers/mtd/maps/pci.c
@@ -203,15 +203,8 @@ intel_dc21285_init(struct pci_dev *dev, struct map_pci_info *map)
 		 * not enabled, should we be allocating a new resource for it
 		 * or simply enabling it?
 		 */
-		if (!(pci_resource_flags(dev, PCI_ROM_RESOURCE) &
-				    IORESOURCE_ROM_ENABLE)) {
-		     	u32 val;
-			pci_resource_flags(dev, PCI_ROM_RESOURCE) |= IORESOURCE_ROM_ENABLE;
-			pci_read_config_dword(dev, PCI_ROM_ADDRESS, &val);
-			val |= PCI_ROM_ADDRESS_ENABLE;
-			pci_write_config_dword(dev, PCI_ROM_ADDRESS, val);
-			printk("%s: enabling expansion ROM\n", pci_name(dev));
-		}
+		pci_enable_rom(dev);
+		printk("%s: enabling expansion ROM\n", pci_name(dev));
 	}
 
 	if (!len || !base)
@@ -232,18 +225,13 @@ intel_dc21285_init(struct pci_dev *dev, struct map_pci_info *map)
 static void
 intel_dc21285_exit(struct pci_dev *dev, struct map_pci_info *map)
 {
-	u32 val;
-
 	if (map->base)
 		iounmap(map->base);
 
 	/*
 	 * We need to undo the PCI BAR2/PCI ROM BAR address alteration.
 	 */
-	pci_resource_flags(dev, PCI_ROM_RESOURCE) &= ~IORESOURCE_ROM_ENABLE;
-	pci_read_config_dword(dev, PCI_ROM_ADDRESS, &val);
-	val &= ~PCI_ROM_ADDRESS_ENABLE;
-	pci_write_config_dword(dev, PCI_ROM_ADDRESS, val);
+	pci_disable_rom(dev);
 }
 
 static unsigned long
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index 49acd4171893..5fcfec034a94 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -230,8 +230,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
 
 #ifdef CONFIG_MTD_OF_PARTS
 	if (err == 0) {
-		err = of_mtd_parse_partitions(&dev->dev, info->mtd,
-		                              dp, &info->parts);
+		err = of_mtd_parse_partitions(&dev->dev, dp, &info->parts);
 		if (err < 0)
 			return err;
 	}
diff --git a/drivers/mtd/maps/walnut.c b/drivers/mtd/maps/walnut.c
deleted file mode 100644
index e243476c8171..000000000000
--- a/drivers/mtd/maps/walnut.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Mapping for Walnut flash
- * (used ebony.c as a "framework")
- *
- * Heikki Lindholm <holindho@infradead.org>
- *
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <asm/ibm4xx.h>
-#include <platforms/4xx/walnut.h>
-
-/* these should be in platforms/4xx/walnut.h ? */
-#define WALNUT_FLASH_ONBD_N(x)		(x & 0x02)
-#define WALNUT_FLASH_SRAM_SEL(x)	(x & 0x01)
-#define WALNUT_FLASH_LOW		0xFFF00000
-#define WALNUT_FLASH_HIGH		0xFFF80000
-#define WALNUT_FLASH_SIZE		0x80000
-
-static struct mtd_info *flash;
-
-static struct map_info walnut_map = {
-	.name =		"Walnut flash",
-	.size =		WALNUT_FLASH_SIZE,
-	.bankwidth =	1,
-};
-
-/* Actually, OpenBIOS is the last 128 KiB of the flash - better
- * partitioning could be made */
-static struct mtd_partition walnut_partitions[] = {
-	{
-		.name =   "OpenBIOS",
-		.offset = 0x0,
-		.size =   WALNUT_FLASH_SIZE,
-		/*.mask_flags = MTD_WRITEABLE, */ /* force read-only */
-	}
-};
-
-int __init init_walnut(void)
-{
-	u8 fpga_brds1;
-	void *fpga_brds1_adr;
-	void *fpga_status_adr;
-	unsigned long flash_base;
-
-	/* this should already be mapped (platform/4xx/walnut.c) */
-	fpga_status_adr = ioremap(WALNUT_FPGA_BASE, 8);
-	if (!fpga_status_adr)
-		return -ENOMEM;
-
-	fpga_brds1_adr = fpga_status_adr+5;
-	fpga_brds1 = readb(fpga_brds1_adr);
-	/* iounmap(fpga_status_adr); */
-
-	if (WALNUT_FLASH_ONBD_N(fpga_brds1)) {
-		printk("The on-board flash is disabled (U79 sw 5)!");
-		iounmap(fpga_status_adr);
-		return -EIO;
-	}
-	if (WALNUT_FLASH_SRAM_SEL(fpga_brds1))
-		flash_base = WALNUT_FLASH_LOW;
-	else
-		flash_base = WALNUT_FLASH_HIGH;
-
-	walnut_map.phys = flash_base;
-	walnut_map.virt =
-		(void __iomem *)ioremap(flash_base, walnut_map.size);
-
-	if (!walnut_map.virt) {
-		printk("Failed to ioremap flash.\n");
-		iounmap(fpga_status_adr);
-		return -EIO;
-	}
-
-	simple_map_init(&walnut_map);
-
-	flash = do_map_probe("jedec_probe", &walnut_map);
-	if (flash) {
-		flash->owner = THIS_MODULE;
-		add_mtd_partitions(flash, walnut_partitions,
-					ARRAY_SIZE(walnut_partitions));
-	} else {
-		printk("map probe failed for flash\n");
-		iounmap(fpga_status_adr);
-		return -ENXIO;
-	}
-
-	iounmap(fpga_status_adr);
-	return 0;
-}
-
-static void __exit cleanup_walnut(void)
-{
-	if (flash) {
-		del_mtd_partitions(flash);
-		map_destroy(flash);
-	}
-
-	if (walnut_map.virt) {
-		iounmap((void *)walnut_map.virt);
-		walnut_map.virt = 0;
-	}
-}
-
-module_init(init_walnut);
-module_exit(cleanup_walnut);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Heikki Lindholm <holindho@infradead.org>");
-MODULE_DESCRIPTION("MTD map and partitions for IBM 405GP Walnut boards");
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 1c74762dec89..963840e9b5bf 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -348,7 +348,7 @@ static void mtdchar_erase_callback (struct erase_info *instr)
 	wake_up((wait_queue_head_t *)instr->priv);
 }
 
-#if defined(CONFIG_MTD_OTP) || defined(CONFIG_MTD_ONENAND_OTP)
+#ifdef CONFIG_HAVE_MTD_OTP
 static int otp_select_filemode(struct mtd_file_info *mfi, int mode)
 {
 	struct mtd_info *mtd = mfi->mtd;
@@ -665,7 +665,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 		break;
 	}
 
-#if defined(CONFIG_MTD_OTP) || defined(CONFIG_MTD_ONENAND_OTP)
+#ifdef CONFIG_HAVE_MTD_OTP
 	case OTPSELECT:
 	{
 		int mode;
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index 2972a5edb73d..789842d0e6f2 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -444,7 +444,7 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr)
 			return -EINVAL;
 	}
 
-	instr->fail_addr = 0xffffffff;
+	instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
 
 	/* make a local copy of instr to avoid modifying the caller's struct */
 	erase = kmalloc(sizeof (struct erase_info), GFP_KERNEL);
@@ -493,7 +493,7 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr)
 			/* sanity check: should never happen since
 			 * block alignment has been checked above */
 			BUG_ON(err == -EINVAL);
-			if (erase->fail_addr != 0xffffffff)
+			if (erase->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
 				instr->fail_addr = erase->fail_addr + offset;
 			break;
 		}
diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c
index 5a680e1e61f1..aebb3b27edbd 100644
--- a/drivers/mtd/mtdoops.c
+++ b/drivers/mtd/mtdoops.c
@@ -33,6 +33,7 @@
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 
+#define MTDOOPS_KERNMSG_MAGIC 0x5d005d00
 #define OOPS_PAGE_SIZE 4096
 
 static struct mtdoops_context {
@@ -99,7 +100,7 @@ static void mtdoops_inc_counter(struct mtdoops_context *cxt)
 	int ret;
 
 	cxt->nextpage++;
-	if (cxt->nextpage > cxt->oops_pages)
+	if (cxt->nextpage >= cxt->oops_pages)
 		cxt->nextpage = 0;
 	cxt->nextcount++;
 	if (cxt->nextcount == 0xffffffff)
@@ -141,7 +142,7 @@ static void mtdoops_workfunc_erase(struct work_struct *work)
 	mod = (cxt->nextpage * OOPS_PAGE_SIZE) % mtd->erasesize;
 	if (mod != 0) {
 		cxt->nextpage = cxt->nextpage + ((mtd->erasesize - mod) / OOPS_PAGE_SIZE);
-		if (cxt->nextpage > cxt->oops_pages)
+		if (cxt->nextpage >= cxt->oops_pages)
 			cxt->nextpage = 0;
 	}
 
@@ -158,7 +159,7 @@ badblock:
 				cxt->nextpage * OOPS_PAGE_SIZE);
 		i++;
 		cxt->nextpage = cxt->nextpage + (mtd->erasesize / OOPS_PAGE_SIZE);
-		if (cxt->nextpage > cxt->oops_pages)
+		if (cxt->nextpage >= cxt->oops_pages)
 			cxt->nextpage = 0;
 		if (i == (cxt->oops_pages / (mtd->erasesize / OOPS_PAGE_SIZE))) {
 			printk(KERN_ERR "mtdoops: All blocks bad!\n");
@@ -224,40 +225,40 @@ static void find_next_position(struct mtdoops_context *cxt)
 {
 	struct mtd_info *mtd = cxt->mtd;
 	int ret, page, maxpos = 0;
-	u32 count, maxcount = 0xffffffff;
+	u32 count[2], maxcount = 0xffffffff;
 	size_t retlen;
 
 	for (page = 0; page < cxt->oops_pages; page++) {
-		ret = mtd->read(mtd, page * OOPS_PAGE_SIZE, 4, &retlen, (u_char *) &count);
-		if ((retlen != 4) || ((ret < 0) && (ret != -EUCLEAN))) {
-			printk(KERN_ERR "mtdoops: Read failure at %d (%td of 4 read)"
+		ret = mtd->read(mtd, page * OOPS_PAGE_SIZE, 8, &retlen, (u_char *) &count[0]);
+		if ((retlen != 8) || ((ret < 0) && (ret != -EUCLEAN))) {
+			printk(KERN_ERR "mtdoops: Read failure at %d (%td of 8 read)"
 				", err %d.\n", page * OOPS_PAGE_SIZE, retlen, ret);
 			continue;
 		}
 
-		if (count == 0xffffffff)
+		if (count[1] != MTDOOPS_KERNMSG_MAGIC)
+			continue;
+		if (count[0] == 0xffffffff)
 			continue;
 		if (maxcount == 0xffffffff) {
-			maxcount = count;
+			maxcount = count[0];
 			maxpos = page;
-		} else if ((count < 0x40000000) && (maxcount > 0xc0000000)) {
-			maxcount = count;
+		} else if ((count[0] < 0x40000000) && (maxcount > 0xc0000000)) {
+			maxcount = count[0];
 			maxpos = page;
-		} else if ((count > maxcount) && (count < 0xc0000000)) {
-			maxcount = count;
+		} else if ((count[0] > maxcount) && (count[0] < 0xc0000000)) {
+			maxcount = count[0];
 			maxpos = page;
-		} else if ((count > maxcount) && (count > 0xc0000000)
+		} else if ((count[0] > maxcount) && (count[0] > 0xc0000000)
 					&& (maxcount > 0x80000000)) {
-			maxcount = count;
+			maxcount = count[0];
 			maxpos = page;
 		}
 	}
 	if (maxcount == 0xffffffff) {
 		cxt->nextpage = 0;
 		cxt->nextcount = 1;
-		cxt->ready = 1;
-		printk(KERN_DEBUG "mtdoops: Ready %d, %d (first init)\n",
-				cxt->nextpage, cxt->nextcount);
+		schedule_work(&cxt->work_erase);
 		return;
 	}
 
@@ -358,8 +359,9 @@ mtdoops_console_write(struct console *co, const char *s, unsigned int count)
 
 	if (cxt->writecount == 0) {
 		u32 *stamp = cxt->oops_buf;
-		*stamp = cxt->nextcount;
-		cxt->writecount = 4;
+		*stamp++ = cxt->nextcount;
+		*stamp = MTDOOPS_KERNMSG_MAGIC;
+		cxt->writecount = 8;
 	}
 
 	if ((count + cxt->writecount) > OOPS_PAGE_SIZE)
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 9a06dc93ee0d..3728913fa5fa 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -214,7 +214,7 @@ static int part_erase(struct mtd_info *mtd, struct erase_info *instr)
 	instr->addr += part->offset;
 	ret = part->master->erase(part->master, instr);
 	if (ret) {
-		if (instr->fail_addr != 0xffffffff)
+		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
 			instr->fail_addr -= part->offset;
 		instr->addr -= part->offset;
 	}
@@ -226,7 +226,7 @@ void mtd_erase_callback(struct erase_info *instr)
 	if (instr->mtd->erase == part_erase) {
 		struct mtd_part *part = PART(instr->mtd);
 
-		if (instr->fail_addr != 0xffffffff)
+		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
 			instr->fail_addr -= part->offset;
 		instr->addr -= part->offset;
 	}
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 41f361c49b32..1c2e9450d663 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -56,6 +56,12 @@ config MTD_NAND_H1900
 	help
 	  This enables the driver for the iPAQ h1900 flash.
 
+config MTD_NAND_GPIO
+	tristate "GPIO NAND Flash driver"
+	depends on GENERIC_GPIO && ARM
+	help
+	  This enables a GPIO based NAND flash driver.
+
 config MTD_NAND_SPIA
 	tristate "NAND Flash device on SPIA board"
 	depends on ARCH_P720T
@@ -68,12 +74,6 @@ config MTD_NAND_AMS_DELTA
 	help
 	  Support for NAND flash on Amstrad E3 (Delta).
 
-config MTD_NAND_TOTO
-	tristate "NAND Flash device on TOTO board"
-	depends on ARCH_OMAP && BROKEN
-	help
-	  Support for NAND flash on Texas Instruments Toto platform.
-
 config MTD_NAND_TS7250
 	tristate "NAND Flash device on TS-7250 board"
 	depends on MACH_TS72XX
@@ -163,13 +163,6 @@ config MTD_NAND_S3C2410_HWECC
 	  incorrect ECC generation, and if using these, the default of
 	  software ECC is preferable.
 
-config MTD_NAND_NDFC
-	tristate "NDFC NanD Flash Controller"
-	depends on 4xx && !PPC_MERGE
-	select MTD_NAND_ECC_SMC
-	help
-	 NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
-
 config MTD_NAND_S3C2410_CLKSTOP
 	bool "S3C2410 NAND IDLE clock stop"
 	depends on MTD_NAND_S3C2410
@@ -340,6 +333,13 @@ config MTD_NAND_PXA3xx
 	  This enables the driver for the NAND flash device found on
 	  PXA3xx processors
 
+config MTD_NAND_PXA3xx_BUILTIN
+	bool "Use builtin definitions for some NAND chips (deprecated)"
+	depends on MTD_NAND_PXA3xx
+	help
+	  This enables builtin definitions for some NAND chips. This
+	  is deprecated in favor of platform specific data.
+
 config MTD_NAND_CM_X270
 	tristate "Support for NAND Flash on CM-X270 modules"
 	depends on MTD_NAND && MACH_ARMCORE
@@ -400,10 +400,24 @@ config MTD_NAND_FSL_ELBC
 
 config MTD_NAND_FSL_UPM
 	tristate "Support for NAND on Freescale UPM"
-	depends on MTD_NAND && OF_GPIO && (PPC_83xx || PPC_85xx)
+	depends on MTD_NAND && (PPC_83xx || PPC_85xx)
 	select FSL_LBC
 	help
 	  Enables support for NAND Flash chips wired onto Freescale PowerPC
 	  processor localbus with User-Programmable Machine support.
 
+config MTD_NAND_MXC
+	tristate "MXC NAND support"
+	depends on ARCH_MX2
+	help
+	  This enables the driver for the NAND flash controller on the
+	  MXC processors.
+
+config MTD_NAND_SH_FLCTL
+	tristate "Support for NAND on Renesas SuperH FLCTL"
+	depends on MTD_NAND && SUPERH && CPU_SUBTYPE_SH7723
+	help
+	  Several Renesas SuperH CPU has FLCTL. This option enables support
+	  for NAND Flash using FLCTL. This driver support SH7723.
+
 endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index b786c5da82da..b661586afbfc 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -8,7 +8,6 @@ obj-$(CONFIG_MTD_NAND_IDS)		+= nand_ids.o
 obj-$(CONFIG_MTD_NAND_CAFE)		+= cafe_nand.o
 obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
 obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
-obj-$(CONFIG_MTD_NAND_TOTO)		+= toto.o
 obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
 obj-$(CONFIG_MTD_NAND_EDB7312)		+= edb7312.o
 obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
@@ -24,6 +23,7 @@ obj-$(CONFIG_MTD_NAND_NANDSIM)		+= nandsim.o
 obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
 obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
 obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel_nand.o
+obj-$(CONFIG_MTD_NAND_GPIO)		+= gpio.o
 obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
 obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
@@ -34,5 +34,7 @@ obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
 obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
 obj-$(CONFIG_MTD_NAND_FSL_ELBC)		+= fsl_elbc_nand.o
 obj-$(CONFIG_MTD_NAND_FSL_UPM)		+= fsl_upm.o
+obj-$(CONFIG_MTD_NAND_SH_FLCTL)		+= sh_flctl.o
+obj-$(CONFIG_MTD_NAND_MXC)		+= mxc_nand.o
 
 nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 3387e0d5076b..c98c1570a40b 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -174,48 +174,6 @@ static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
 }
 
 /*
- * write oob for small pages
- */
-static int atmel_nand_write_oob_512(struct mtd_info *mtd,
-		struct nand_chip *chip, int page)
-{
-	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
-	int eccsize = chip->ecc.size, length = mtd->oobsize;
-	int len, pos, status = 0;
-	const uint8_t *bufpoi = chip->oob_poi;
-
-	pos = eccsize + chunk;
-
-	chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
-	len = min_t(int, length, chunk);
-	chip->write_buf(mtd, bufpoi, len);
-	bufpoi += len;
-	length -= len;
-	if (length > 0)
-		chip->write_buf(mtd, bufpoi, length);
-
-	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
-	status = chip->waitfunc(mtd, chip);
-
-	return status & NAND_STATUS_FAIL ? -EIO : 0;
-
-}
-
-/*
- * read oob for small pages
- */
-static int atmel_nand_read_oob_512(struct mtd_info *mtd,
-		struct nand_chip *chip,	int page, int sndcmd)
-{
-	if (sndcmd) {
-		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-		sndcmd = 0;
-	}
-	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-	return sndcmd;
-}
-
-/*
  * Calculate HW ECC
  *
  * function called after a write
@@ -235,14 +193,14 @@ static int atmel_nand_calculate(struct mtd_info *mtd,
 	/* get the first 2 ECC bytes */
 	ecc_value = ecc_readl(host->ecc, PR);
 
-	ecc_code[eccpos[0]] = ecc_value & 0xFF;
-	ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
+	ecc_code[0] = ecc_value & 0xFF;
+	ecc_code[1] = (ecc_value >> 8) & 0xFF;
 
 	/* get the last 2 ECC bytes */
 	ecc_value = ecc_readl(host->ecc, NPR) & ATMEL_ECC_NPARITY;
 
-	ecc_code[eccpos[2]] = ecc_value & 0xFF;
-	ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
+	ecc_code[2] = ecc_value & 0xFF;
+	ecc_code[3] = (ecc_value >> 8) & 0xFF;
 
 	return 0;
 }
@@ -476,14 +434,12 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 			res = -EIO;
 			goto err_ecc_ioremap;
 		}
-		nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+		nand_chip->ecc.mode = NAND_ECC_HW;
 		nand_chip->ecc.calculate = atmel_nand_calculate;
 		nand_chip->ecc.correct = atmel_nand_correct;
 		nand_chip->ecc.hwctl = atmel_nand_hwctl;
 		nand_chip->ecc.read_page = atmel_nand_read_page;
 		nand_chip->ecc.bytes = 4;
-		nand_chip->ecc.prepad = 0;
-		nand_chip->ecc.postpad = 0;
 	}
 
 	nand_chip->chip_delay = 20;		/* 20us command delay time */
@@ -514,7 +470,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 		goto err_scan_ident;
 	}
 
-	if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
+	if (nand_chip->ecc.mode == NAND_ECC_HW) {
 		/* ECC is calculated for the whole page (1 step) */
 		nand_chip->ecc.size = mtd->writesize;
 
@@ -522,8 +478,6 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 		switch (mtd->writesize) {
 		case 512:
 			nand_chip->ecc.layout = &atmel_oobinfo_small;
-			nand_chip->ecc.read_oob = atmel_nand_read_oob_512;
-			nand_chip->ecc.write_oob = atmel_nand_write_oob_512;
 			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
 			break;
 		case 1024:
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index 3370a800fd36..9f1b451005ca 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -289,8 +289,10 @@ static int __init cs553x_init(void)
 	int i;
 	uint64_t val;
 
+#ifdef CONFIG_MTD_PARTITIONS
 	int mtd_parts_nb = 0;
 	struct mtd_partition *mtd_parts = NULL;
+#endif
 
 	/* If the CPU isn't a Geode GX or LX, abort */
 	if (!is_geode())
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 98ad3cefcaf4..4aa5bd6158da 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -918,8 +918,7 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
 
 #ifdef CONFIG_MTD_OF_PARTS
 	if (ret == 0) {
-		ret = of_mtd_parse_partitions(priv->dev, &priv->mtd,
-		                              node, &parts);
+		ret = of_mtd_parse_partitions(priv->dev, node, &parts);
 		if (ret < 0)
 			goto err;
 	}
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 1ebfd87f00b4..024e3fffd4bb 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -13,6 +13,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/delay.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
@@ -36,8 +37,6 @@ struct fsl_upm_nand {
 	uint8_t upm_cmd_offset;
 	void __iomem *io_base;
 	int rnb_gpio;
-	const uint32_t *wait_pattern;
-	const uint32_t *wait_write;
 	int chip_delay;
 };
 
@@ -61,10 +60,11 @@ static void fun_wait_rnb(struct fsl_upm_nand *fun)
 	if (fun->rnb_gpio >= 0) {
 		while (--cnt && !fun_chip_ready(&fun->mtd))
 			cpu_relax();
+		if (!cnt)
+			dev_err(fun->dev, "tired waiting for RNB\n");
+	} else {
+		ndelay(100);
 	}
-
-	if (!cnt)
-		dev_err(fun->dev, "tired waiting for RNB\n");
 }
 
 static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
@@ -89,8 +89,7 @@ static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 
 	fsl_upm_run_pattern(&fun->upm, fun->io_base, cmd);
 
-	if (fun->wait_pattern)
-		fun_wait_rnb(fun);
+	fun_wait_rnb(fun);
 }
 
 static uint8_t fun_read_byte(struct mtd_info *mtd)
@@ -116,14 +115,16 @@ static void fun_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
 
 	for (i = 0; i < len; i++) {
 		out_8(fun->chip.IO_ADDR_W, buf[i]);
-		if (fun->wait_write)
-			fun_wait_rnb(fun);
+		fun_wait_rnb(fun);
 	}
 }
 
-static int __devinit fun_chip_init(struct fsl_upm_nand *fun)
+static int __devinit fun_chip_init(struct fsl_upm_nand *fun,
+				   const struct device_node *upm_np,
+				   const struct resource *io_res)
 {
 	int ret;
+	struct device_node *flash_np;
 #ifdef CONFIG_MTD_PARTITIONS
 	static const char *part_types[] = { "cmdlinepart", NULL, };
 #endif
@@ -143,18 +144,37 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun)
 	fun->mtd.priv = &fun->chip;
 	fun->mtd.owner = THIS_MODULE;
 
+	flash_np = of_get_next_child(upm_np, NULL);
+	if (!flash_np)
+		return -ENODEV;
+
+	fun->mtd.name = kasprintf(GFP_KERNEL, "%x.%s", io_res->start,
+				  flash_np->name);
+	if (!fun->mtd.name) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
 	ret = nand_scan(&fun->mtd, 1);
 	if (ret)
-		return ret;
-
-	fun->mtd.name = fun->dev->bus_id;
+		goto err;
 
 #ifdef CONFIG_MTD_PARTITIONS
 	ret = parse_mtd_partitions(&fun->mtd, part_types, &fun->parts, 0);
+
+#ifdef CONFIG_MTD_OF_PARTS
+	if (ret == 0)
+		ret = of_mtd_parse_partitions(fun->dev, &fun->mtd,
+					      flash_np, &fun->parts);
+#endif
 	if (ret > 0)
-		return add_mtd_partitions(&fun->mtd, fun->parts, ret);
+		ret = add_mtd_partitions(&fun->mtd, fun->parts, ret);
+	else
 #endif
-	return add_mtd_device(&fun->mtd);
+		ret = add_mtd_device(&fun->mtd);
+err:
+	of_node_put(flash_np);
+	return ret;
 }
 
 static int __devinit fun_probe(struct of_device *ofdev,
@@ -211,6 +231,12 @@ static int __devinit fun_probe(struct of_device *ofdev,
 		goto err2;
 	}
 
+	prop = of_get_property(ofdev->node, "chip-delay", NULL);
+	if (prop)
+		fun->chip_delay = *prop;
+	else
+		fun->chip_delay = 50;
+
 	fun->io_base = devm_ioremap_nocache(&ofdev->dev, io_res.start,
 					  io_res.end - io_res.start + 1);
 	if (!fun->io_base) {
@@ -220,17 +246,8 @@ static int __devinit fun_probe(struct of_device *ofdev,
 
 	fun->dev = &ofdev->dev;
 	fun->last_ctrl = NAND_CLE;
-	fun->wait_pattern = of_get_property(ofdev->node, "fsl,wait-pattern",
-					    NULL);
-	fun->wait_write = of_get_property(ofdev->node, "fsl,wait-write", NULL);
-
-	prop = of_get_property(ofdev->node, "chip-delay", NULL);
-	if (prop)
-		fun->chip_delay = *prop;
-	else
-		fun->chip_delay = 50;
 
-	ret = fun_chip_init(fun);
+	ret = fun_chip_init(fun, ofdev->node, &io_res);
 	if (ret)
 		goto err2;
 
@@ -251,6 +268,7 @@ static int __devexit fun_remove(struct of_device *ofdev)
 	struct fsl_upm_nand *fun = dev_get_drvdata(&ofdev->dev);
 
 	nand_release(&fun->mtd);
+	kfree(fun->mtd.name);
 
 	if (fun->rnb_gpio >= 0)
 		gpio_free(fun->rnb_gpio);
diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
new file mode 100644
index 000000000000..8f902e75aa85
--- /dev/null
+++ b/drivers/mtd/nand/gpio.c
@@ -0,0 +1,375 @@
+/*
+ * drivers/mtd/nand/gpio.c
+ *
+ * Updated, and converted to generic GPIO based driver by Russell King.
+ *
+ * Written by Ben Dooks <ben@simtec.co.uk>
+ *   Based on 2.4 version by Mark Whittaker
+ *
+ * © 2004 Simtec Electronics
+ *
+ * Device driver for NAND connected via GPIO
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand-gpio.h>
+
+struct gpiomtd {
+	void __iomem		*io_sync;
+	struct mtd_info		mtd_info;
+	struct nand_chip	nand_chip;
+	struct gpio_nand_platdata plat;
+};
+
+#define gpio_nand_getpriv(x) container_of(x, struct gpiomtd, mtd_info)
+
+
+#ifdef CONFIG_ARM
+/* gpio_nand_dosync()
+ *
+ * Make sure the GPIO state changes occur in-order with writes to NAND
+ * memory region.
+ * Needed on PXA due to bus-reordering within the SoC itself (see section on
+ * I/O ordering in PXA manual (section 2.3, p35)
+ */
+static void gpio_nand_dosync(struct gpiomtd *gpiomtd)
+{
+	unsigned long tmp;
+
+	if (gpiomtd->io_sync) {
+		/*
+		 * Linux memory barriers don't cater for what's required here.
+		 * What's required is what's here - a read from a separate
+		 * region with a dependency on that read.
+		 */
+		tmp = readl(gpiomtd->io_sync);
+		asm volatile("mov %1, %0\n" : "=r" (tmp) : "r" (tmp));
+	}
+}
+#else
+static inline void gpio_nand_dosync(struct gpiomtd *gpiomtd) {}
+#endif
+
+static void gpio_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
+
+	gpio_nand_dosync(gpiomtd);
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		gpio_set_value(gpiomtd->plat.gpio_nce, !(ctrl & NAND_NCE));
+		gpio_set_value(gpiomtd->plat.gpio_cle, !!(ctrl & NAND_CLE));
+		gpio_set_value(gpiomtd->plat.gpio_ale, !!(ctrl & NAND_ALE));
+		gpio_nand_dosync(gpiomtd);
+	}
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	writeb(cmd, gpiomtd->nand_chip.IO_ADDR_W);
+	gpio_nand_dosync(gpiomtd);
+}
+
+static void gpio_nand_writebuf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+
+	writesb(this->IO_ADDR_W, buf, len);
+}
+
+static void gpio_nand_readbuf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+
+	readsb(this->IO_ADDR_R, buf, len);
+}
+
+static int gpio_nand_verifybuf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned char read, *p = (unsigned char *) buf;
+	int i, err = 0;
+
+	for (i = 0; i < len; i++) {
+		read = readb(this->IO_ADDR_R);
+		if (read != p[i]) {
+			pr_debug("%s: err at %d (read %04x vs %04x)\n",
+			       __func__, i, read, p[i]);
+			err = -EFAULT;
+		}
+	}
+	return err;
+}
+
+static void gpio_nand_writebuf16(struct mtd_info *mtd, const u_char *buf,
+				 int len)
+{
+	struct nand_chip *this = mtd->priv;
+
+	if (IS_ALIGNED((unsigned long)buf, 2)) {
+		writesw(this->IO_ADDR_W, buf, len>>1);
+	} else {
+		int i;
+		unsigned short *ptr = (unsigned short *)buf;
+
+		for (i = 0; i < len; i += 2, ptr++)
+			writew(*ptr, this->IO_ADDR_W);
+	}
+}
+
+static void gpio_nand_readbuf16(struct mtd_info *mtd, u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+
+	if (IS_ALIGNED((unsigned long)buf, 2)) {
+		readsw(this->IO_ADDR_R, buf, len>>1);
+	} else {
+		int i;
+		unsigned short *ptr = (unsigned short *)buf;
+
+		for (i = 0; i < len; i += 2, ptr++)
+			*ptr = readw(this->IO_ADDR_R);
+	}
+}
+
+static int gpio_nand_verifybuf16(struct mtd_info *mtd, const u_char *buf,
+				 int len)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned short read, *p = (unsigned short *) buf;
+	int i, err = 0;
+	len >>= 1;
+
+	for (i = 0; i < len; i++) {
+		read = readw(this->IO_ADDR_R);
+		if (read != p[i]) {
+			pr_debug("%s: err at %d (read %04x vs %04x)\n",
+			       __func__, i, read, p[i]);
+			err = -EFAULT;
+		}
+	}
+	return err;
+}
+
+
+static int gpio_nand_devready(struct mtd_info *mtd)
+{
+	struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
+	return gpio_get_value(gpiomtd->plat.gpio_rdy);
+}
+
+static int __devexit gpio_nand_remove(struct platform_device *dev)
+{
+	struct gpiomtd *gpiomtd = platform_get_drvdata(dev);
+	struct resource *res;
+
+	nand_release(&gpiomtd->mtd_info);
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	iounmap(gpiomtd->io_sync);
+	if (res)
+		release_mem_region(res->start, res->end - res->start + 1);
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	iounmap(gpiomtd->nand_chip.IO_ADDR_R);
+	release_mem_region(res->start, res->end - res->start + 1);
+
+	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
+		gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
+	gpio_set_value(gpiomtd->plat.gpio_nce, 1);
+
+	gpio_free(gpiomtd->plat.gpio_cle);
+	gpio_free(gpiomtd->plat.gpio_ale);
+	gpio_free(gpiomtd->plat.gpio_nce);
+	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
+		gpio_free(gpiomtd->plat.gpio_nwp);
+	gpio_free(gpiomtd->plat.gpio_rdy);
+
+	kfree(gpiomtd);
+
+	return 0;
+}
+
+static void __iomem *request_and_remap(struct resource *res, size_t size,
+					const char *name, int *err)
+{
+	void __iomem *ptr;
+
+	if (!request_mem_region(res->start, res->end - res->start + 1, name)) {
+		*err = -EBUSY;
+		return NULL;
+	}
+
+	ptr = ioremap(res->start, size);
+	if (!ptr) {
+		release_mem_region(res->start, res->end - res->start + 1);
+		*err = -ENOMEM;
+	}
+	return ptr;
+}
+
+static int __devinit gpio_nand_probe(struct platform_device *dev)
+{
+	struct gpiomtd *gpiomtd;
+	struct nand_chip *this;
+	struct resource *res0, *res1;
+	int ret;
+
+	if (!dev->dev.platform_data)
+		return -EINVAL;
+
+	res0 = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res0)
+		return -EINVAL;
+
+	gpiomtd = kzalloc(sizeof(*gpiomtd), GFP_KERNEL);
+	if (gpiomtd == NULL) {
+		dev_err(&dev->dev, "failed to create NAND MTD\n");
+		return -ENOMEM;
+	}
+
+	this = &gpiomtd->nand_chip;
+	this->IO_ADDR_R = request_and_remap(res0, 2, "NAND", &ret);
+	if (!this->IO_ADDR_R) {
+		dev_err(&dev->dev, "unable to map NAND\n");
+		goto err_map;
+	}
+
+	res1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	if (res1) {
+		gpiomtd->io_sync = request_and_remap(res1, 4, "NAND sync", &ret);
+		if (!gpiomtd->io_sync) {
+			dev_err(&dev->dev, "unable to map sync NAND\n");
+			goto err_sync;
+		}
+	}
+
+	memcpy(&gpiomtd->plat, dev->dev.platform_data, sizeof(gpiomtd->plat));
+
+	ret = gpio_request(gpiomtd->plat.gpio_nce, "NAND NCE");
+	if (ret)
+		goto err_nce;
+	gpio_direction_output(gpiomtd->plat.gpio_nce, 1);
+	if (gpio_is_valid(gpiomtd->plat.gpio_nwp)) {
+		ret = gpio_request(gpiomtd->plat.gpio_nwp, "NAND NWP");
+		if (ret)
+			goto err_nwp;
+		gpio_direction_output(gpiomtd->plat.gpio_nwp, 1);
+	}
+	ret = gpio_request(gpiomtd->plat.gpio_ale, "NAND ALE");
+	if (ret)
+		goto err_ale;
+	gpio_direction_output(gpiomtd->plat.gpio_ale, 0);
+	ret = gpio_request(gpiomtd->plat.gpio_cle, "NAND CLE");
+	if (ret)
+		goto err_cle;
+	gpio_direction_output(gpiomtd->plat.gpio_cle, 0);
+	ret = gpio_request(gpiomtd->plat.gpio_rdy, "NAND RDY");
+	if (ret)
+		goto err_rdy;
+	gpio_direction_input(gpiomtd->plat.gpio_rdy);
+
+
+	this->IO_ADDR_W  = this->IO_ADDR_R;
+	this->ecc.mode   = NAND_ECC_SOFT;
+	this->options    = gpiomtd->plat.options;
+	this->chip_delay = gpiomtd->plat.chip_delay;
+
+	/* install our routines */
+	this->cmd_ctrl   = gpio_nand_cmd_ctrl;
+	this->dev_ready  = gpio_nand_devready;
+
+	if (this->options & NAND_BUSWIDTH_16) {
+		this->read_buf   = gpio_nand_readbuf16;
+		this->write_buf  = gpio_nand_writebuf16;
+		this->verify_buf = gpio_nand_verifybuf16;
+	} else {
+		this->read_buf   = gpio_nand_readbuf;
+		this->write_buf  = gpio_nand_writebuf;
+		this->verify_buf = gpio_nand_verifybuf;
+	}
+
+	/* set the mtd private data for the nand driver */
+	gpiomtd->mtd_info.priv = this;
+	gpiomtd->mtd_info.owner = THIS_MODULE;
+
+	if (nand_scan(&gpiomtd->mtd_info, 1)) {
+		dev_err(&dev->dev, "no nand chips found?\n");
+		ret = -ENXIO;
+		goto err_wp;
+	}
+
+	if (gpiomtd->plat.adjust_parts)
+		gpiomtd->plat.adjust_parts(&gpiomtd->plat,
+					   gpiomtd->mtd_info.size);
+
+	add_mtd_partitions(&gpiomtd->mtd_info, gpiomtd->plat.parts,
+			   gpiomtd->plat.num_parts);
+	platform_set_drvdata(dev, gpiomtd);
+
+	return 0;
+
+err_wp:
+	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
+		gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
+	gpio_free(gpiomtd->plat.gpio_rdy);
+err_rdy:
+	gpio_free(gpiomtd->plat.gpio_cle);
+err_cle:
+	gpio_free(gpiomtd->plat.gpio_ale);
+err_ale:
+	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
+		gpio_free(gpiomtd->plat.gpio_nwp);
+err_nwp:
+	gpio_free(gpiomtd->plat.gpio_nce);
+err_nce:
+	iounmap(gpiomtd->io_sync);
+	if (res1)
+		release_mem_region(res1->start, res1->end - res1->start + 1);
+err_sync:
+	iounmap(gpiomtd->nand_chip.IO_ADDR_R);
+	release_mem_region(res0->start, res0->end - res0->start + 1);
+err_map:
+	kfree(gpiomtd);
+	return ret;
+}
+
+static struct platform_driver gpio_nand_driver = {
+	.probe		= gpio_nand_probe,
+	.remove		= gpio_nand_remove,
+	.driver		= {
+		.name	= "gpio-nand",
+	},
+};
+
+static int __init gpio_nand_init(void)
+{
+	printk(KERN_INFO "GPIO NAND driver, © 2004 Simtec Electronics\n");
+
+	return platform_driver_register(&gpio_nand_driver);
+}
+
+static void __exit gpio_nand_exit(void)
+{
+	platform_driver_unregister(&gpio_nand_driver);
+}
+
+module_init(gpio_nand_init);
+module_exit(gpio_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("GPIO NAND Driver");
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
new file mode 100644
index 000000000000..21fd4f1c4806
--- /dev/null
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -0,0 +1,1077 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+#include <mach/mxc_nand.h>
+
+#define DRIVER_NAME "mxc_nand"
+
+/* Addresses for NFC registers */
+#define NFC_BUF_SIZE		0xE00
+#define NFC_BUF_ADDR		0xE04
+#define NFC_FLASH_ADDR		0xE06
+#define NFC_FLASH_CMD		0xE08
+#define NFC_CONFIG		0xE0A
+#define NFC_ECC_STATUS_RESULT	0xE0C
+#define NFC_RSLTMAIN_AREA	0xE0E
+#define NFC_RSLTSPARE_AREA	0xE10
+#define NFC_WRPROT		0xE12
+#define NFC_UNLOCKSTART_BLKADDR	0xE14
+#define NFC_UNLOCKEND_BLKADDR	0xE16
+#define NFC_NF_WRPRST		0xE18
+#define NFC_CONFIG1		0xE1A
+#define NFC_CONFIG2		0xE1C
+
+/* Addresses for NFC RAM BUFFER Main area 0 */
+#define MAIN_AREA0		0x000
+#define MAIN_AREA1		0x200
+#define MAIN_AREA2		0x400
+#define MAIN_AREA3		0x600
+
+/* Addresses for NFC SPARE BUFFER Spare area 0 */
+#define SPARE_AREA0		0x800
+#define SPARE_AREA1		0x810
+#define SPARE_AREA2		0x820
+#define SPARE_AREA3		0x830
+
+/* Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register
+ * for Command operation */
+#define NFC_CMD            0x1
+
+/* Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register
+ * for Address operation */
+#define NFC_ADDR           0x2
+
+/* Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register
+ * for Input operation */
+#define NFC_INPUT          0x4
+
+/* Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register
+ * for Data Output operation */
+#define NFC_OUTPUT         0x8
+
+/* Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register
+ * for Read ID operation */
+#define NFC_ID             0x10
+
+/* Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register
+ * for Read Status operation */
+#define NFC_STATUS         0x20
+
+/* Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read
+ * Status operation */
+#define NFC_INT            0x8000
+
+#define NFC_SP_EN           (1 << 2)
+#define NFC_ECC_EN          (1 << 3)
+#define NFC_INT_MSK         (1 << 4)
+#define NFC_BIG             (1 << 5)
+#define NFC_RST             (1 << 6)
+#define NFC_CE              (1 << 7)
+#define NFC_ONE_CYCLE       (1 << 8)
+
+struct mxc_nand_host {
+	struct mtd_info		mtd;
+	struct nand_chip	nand;
+	struct mtd_partition	*parts;
+	struct device		*dev;
+
+	void __iomem		*regs;
+	int			spare_only;
+	int			status_request;
+	int			pagesize_2k;
+	uint16_t		col_addr;
+	struct clk		*clk;
+	int			clk_act;
+	int			irq;
+
+	wait_queue_head_t	irq_waitq;
+};
+
+/* Define delays in microsec for NAND device operations */
+#define TROP_US_DELAY   2000
+/* Macros to get byte and bit positions of ECC */
+#define COLPOS(x)  ((x) >> 3)
+#define BITPOS(x) ((x) & 0xf)
+
+/* Define single bit Error positions in Main & Spare area */
+#define MAIN_SINGLEBIT_ERROR 0x4
+#define SPARE_SINGLEBIT_ERROR 0x1
+
+/* OOB placement block for use with hardware ecc generation */
+static struct nand_ecclayout nand_hw_eccoob_8 = {
+	.eccbytes = 5,
+	.eccpos = {6, 7, 8, 9, 10},
+	.oobfree = {{0, 5}, {11, 5}, }
+};
+
+static struct nand_ecclayout nand_hw_eccoob_16 = {
+	.eccbytes = 5,
+	.eccpos = {6, 7, 8, 9, 10},
+	.oobfree = {{0, 6}, {12, 4}, }
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probes[] = { "RedBoot", "cmdlinepart", NULL };
+#endif
+
+static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
+{
+	struct mxc_nand_host *host = dev_id;
+
+	uint16_t tmp;
+
+	tmp = readw(host->regs + NFC_CONFIG1);
+	tmp |= NFC_INT_MSK; /* Disable interrupt */
+	writew(tmp, host->regs + NFC_CONFIG1);
+
+	wake_up(&host->irq_waitq);
+
+	return IRQ_HANDLED;
+}
+
+/* This function polls the NANDFC to wait for the basic operation to
+ * complete by checking the INT bit of config2 register.
+ */
+static void wait_op_done(struct mxc_nand_host *host, int max_retries,
+				uint16_t param, int useirq)
+{
+	uint32_t tmp;
+
+	if (useirq) {
+		if ((readw(host->regs + NFC_CONFIG2) & NFC_INT) == 0) {
+
+			tmp = readw(host->regs + NFC_CONFIG1);
+			tmp  &= ~NFC_INT_MSK;	/* Enable interrupt */
+			writew(tmp, host->regs + NFC_CONFIG1);
+
+			wait_event(host->irq_waitq,
+				readw(host->regs + NFC_CONFIG2) & NFC_INT);
+
+			tmp = readw(host->regs + NFC_CONFIG2);
+			tmp  &= ~NFC_INT;
+			writew(tmp, host->regs + NFC_CONFIG2);
+		}
+	} else {
+		while (max_retries-- > 0) {
+			if (readw(host->regs + NFC_CONFIG2) & NFC_INT) {
+				tmp = readw(host->regs + NFC_CONFIG2);
+				tmp  &= ~NFC_INT;
+				writew(tmp, host->regs + NFC_CONFIG2);
+				break;
+			}
+			udelay(1);
+		}
+		if (max_retries <= 0)
+			DEBUG(MTD_DEBUG_LEVEL0, "%s(%d): INT not set\n",
+			      __func__, param);
+	}
+}
+
+/* This function issues the specified command to the NAND device and
+ * waits for completion. */
+static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq)
+{
+	DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
+
+	writew(cmd, host->regs + NFC_FLASH_CMD);
+	writew(NFC_CMD, host->regs + NFC_CONFIG2);
+
+	/* Wait for operation to complete */
+	wait_op_done(host, TROP_US_DELAY, cmd, useirq);
+}
+
+/* This function sends an address (or partial address) to the
+ * NAND device. The address is used to select the source/destination for
+ * a NAND command. */
+static void send_addr(struct mxc_nand_host *host, uint16_t addr, int islast)
+{
+	DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast);
+
+	writew(addr, host->regs + NFC_FLASH_ADDR);
+	writew(NFC_ADDR, host->regs + NFC_CONFIG2);
+
+	/* Wait for operation to complete */
+	wait_op_done(host, TROP_US_DELAY, addr, islast);
+}
+
+/* This function requests the NANDFC to initate the transfer
+ * of data currently in the NANDFC RAM buffer to the NAND device. */
+static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
+			int spare_only)
+{
+	DEBUG(MTD_DEBUG_LEVEL3, "send_prog_page (%d)\n", spare_only);
+
+	/* NANDFC buffer 0 is used for page read/write */
+	writew(buf_id, host->regs + NFC_BUF_ADDR);
+
+	/* Configure spare or page+spare access */
+	if (!host->pagesize_2k) {
+		uint16_t config1 = readw(host->regs + NFC_CONFIG1);
+		if (spare_only)
+			config1 |= NFC_SP_EN;
+		else
+			config1 &= ~(NFC_SP_EN);
+		writew(config1, host->regs + NFC_CONFIG1);
+	}
+
+	writew(NFC_INPUT, host->regs + NFC_CONFIG2);
+
+	/* Wait for operation to complete */
+	wait_op_done(host, TROP_US_DELAY, spare_only, true);
+}
+
+/* Requests NANDFC to initated the transfer of data from the
+ * NAND device into in the NANDFC ram buffer. */
+static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
+		int spare_only)
+{
+	DEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only);
+
+	/* NANDFC buffer 0 is used for page read/write */
+	writew(buf_id, host->regs + NFC_BUF_ADDR);
+
+	/* Configure spare or page+spare access */
+	if (!host->pagesize_2k) {
+		uint32_t config1 = readw(host->regs + NFC_CONFIG1);
+		if (spare_only)
+			config1 |= NFC_SP_EN;
+		else
+			config1 &= ~NFC_SP_EN;
+		writew(config1, host->regs + NFC_CONFIG1);
+	}
+
+	writew(NFC_OUTPUT, host->regs + NFC_CONFIG2);
+
+	/* Wait for operation to complete */
+	wait_op_done(host, TROP_US_DELAY, spare_only, true);
+}
+
+/* Request the NANDFC to perform a read of the NAND device ID. */
+static void send_read_id(struct mxc_nand_host *host)
+{
+	struct nand_chip *this = &host->nand;
+	uint16_t tmp;
+
+	/* NANDFC buffer 0 is used for device ID output */
+	writew(0x0, host->regs + NFC_BUF_ADDR);
+
+	/* Read ID into main buffer */
+	tmp = readw(host->regs + NFC_CONFIG1);
+	tmp &= ~NFC_SP_EN;
+	writew(tmp, host->regs + NFC_CONFIG1);
+
+	writew(NFC_ID, host->regs + NFC_CONFIG2);
+
+	/* Wait for operation to complete */
+	wait_op_done(host, TROP_US_DELAY, 0, true);
+
+	if (this->options & NAND_BUSWIDTH_16) {
+		void __iomem *main_buf = host->regs + MAIN_AREA0;
+		/* compress the ID info */
+		writeb(readb(main_buf + 2), main_buf + 1);
+		writeb(readb(main_buf + 4), main_buf + 2);
+		writeb(readb(main_buf + 6), main_buf + 3);
+		writeb(readb(main_buf + 8), main_buf + 4);
+		writeb(readb(main_buf + 10), main_buf + 5);
+	}
+}
+
+/* This function requests the NANDFC to perform a read of the
+ * NAND device status and returns the current status. */
+static uint16_t get_dev_status(struct mxc_nand_host *host)
+{
+	void __iomem *main_buf = host->regs + MAIN_AREA1;
+	uint32_t store;
+	uint16_t ret, tmp;
+	/* Issue status request to NAND device */
+
+	/* store the main area1 first word, later do recovery */
+	store = readl(main_buf);
+	/* NANDFC buffer 1 is used for device status to prevent
+	 * corruption of read/write buffer on status requests. */
+	writew(1, host->regs + NFC_BUF_ADDR);
+
+	/* Read status into main buffer */
+	tmp = readw(host->regs + NFC_CONFIG1);
+	tmp &= ~NFC_SP_EN;
+	writew(tmp, host->regs + NFC_CONFIG1);
+
+	writew(NFC_STATUS, host->regs + NFC_CONFIG2);
+
+	/* Wait for operation to complete */
+	wait_op_done(host, TROP_US_DELAY, 0, true);
+
+	/* Status is placed in first word of main buffer */
+	/* get status, then recovery area 1 data */
+	ret = readw(main_buf);
+	writel(store, main_buf);
+
+	return ret;
+}
+
+/* This functions is used by upper layer to checks if device is ready */
+static int mxc_nand_dev_ready(struct mtd_info *mtd)
+{
+	/*
+	 * NFC handles R/B internally. Therefore, this function
+	 * always returns status as ready.
+	 */
+	return 1;
+}
+
+static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	/*
+	 * If HW ECC is enabled, we turn it on during init. There is
+	 * no need to enable again here.
+	 */
+}
+
+static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+				 u_char *read_ecc, u_char *calc_ecc)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+
+	/*
+	 * 1-Bit errors are automatically corrected in HW.  No need for
+	 * additional correction.  2-Bit errors cannot be corrected by
+	 * HW ECC, so we need to return failure
+	 */
+	uint16_t ecc_status = readw(host->regs + NFC_ECC_STATUS_RESULT);
+
+	if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
+		DEBUG(MTD_DEBUG_LEVEL0,
+		      "MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+				  u_char *ecc_code)
+{
+	return 0;
+}
+
+static u_char mxc_nand_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	uint8_t ret = 0;
+	uint16_t col, rd_word;
+	uint16_t __iomem *main_buf = host->regs + MAIN_AREA0;
+	uint16_t __iomem *spare_buf = host->regs + SPARE_AREA0;
+
+	/* Check for status request */
+	if (host->status_request)
+		return get_dev_status(host) & 0xFF;
+
+	/* Get column for 16-bit access */
+	col = host->col_addr >> 1;
+
+	/* If we are accessing the spare region */
+	if (host->spare_only)
+		rd_word = readw(&spare_buf[col]);
+	else
+		rd_word = readw(&main_buf[col]);
+
+	/* Pick upper/lower byte of word from RAM buffer */
+	if (host->col_addr & 0x1)
+		ret = (rd_word >> 8) & 0xFF;
+	else
+		ret = rd_word & 0xFF;
+
+	/* Update saved column address */
+	host->col_addr++;
+
+	return ret;
+}
+
+static uint16_t mxc_nand_read_word(struct mtd_info *mtd)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	uint16_t col, rd_word, ret;
+	uint16_t __iomem *p;
+
+	DEBUG(MTD_DEBUG_LEVEL3,
+	      "mxc_nand_read_word(col = %d)\n", host->col_addr);
+
+	col = host->col_addr;
+	/* Adjust saved column address */
+	if (col < mtd->writesize && host->spare_only)
+		col += mtd->writesize;
+
+	if (col < mtd->writesize)
+		p = (host->regs + MAIN_AREA0) + (col >> 1);
+	else
+		p = (host->regs + SPARE_AREA0) + ((col - mtd->writesize) >> 1);
+
+	if (col & 1) {
+		rd_word = readw(p);
+		ret = (rd_word >> 8) & 0xff;
+		rd_word = readw(&p[1]);
+		ret |= (rd_word << 8) & 0xff00;
+
+	} else
+		ret = readw(p);
+
+	/* Update saved column address */
+	host->col_addr = col + 2;
+
+	return ret;
+}
+
+/* Write data of length len to buffer buf. The data to be
+ * written on NAND Flash is first copied to RAMbuffer. After the Data Input
+ * Operation by the NFC, the data is written to NAND Flash */
+static void mxc_nand_write_buf(struct mtd_info *mtd,
+				const u_char *buf, int len)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	int n, col, i = 0;
+
+	DEBUG(MTD_DEBUG_LEVEL3,
+	      "mxc_nand_write_buf(col = %d, len = %d)\n", host->col_addr,
+	      len);
+
+	col = host->col_addr;
+
+	/* Adjust saved column address */
+	if (col < mtd->writesize && host->spare_only)
+		col += mtd->writesize;
+
+	n = mtd->writesize + mtd->oobsize - col;
+	n = min(len, n);
+
+	DEBUG(MTD_DEBUG_LEVEL3,
+	      "%s:%d: col = %d, n = %d\n", __func__, __LINE__, col, n);
+
+	while (n) {
+		void __iomem *p;
+
+		if (col < mtd->writesize)
+			p = host->regs + MAIN_AREA0 + (col & ~3);
+		else
+			p = host->regs + SPARE_AREA0 -
+						mtd->writesize + (col & ~3);
+
+		DEBUG(MTD_DEBUG_LEVEL3, "%s:%d: p = %p\n", __func__,
+		      __LINE__, p);
+
+		if (((col | (int)&buf[i]) & 3) || n < 16) {
+			uint32_t data = 0;
+
+			if (col & 3 || n < 4)
+				data = readl(p);
+
+			switch (col & 3) {
+			case 0:
+				if (n) {
+					data = (data & 0xffffff00) |
+					    (buf[i++] << 0);
+					n--;
+					col++;
+				}
+			case 1:
+				if (n) {
+					data = (data & 0xffff00ff) |
+					    (buf[i++] << 8);
+					n--;
+					col++;
+				}
+			case 2:
+				if (n) {
+					data = (data & 0xff00ffff) |
+					    (buf[i++] << 16);
+					n--;
+					col++;
+				}
+			case 3:
+				if (n) {
+					data = (data & 0x00ffffff) |
+					    (buf[i++] << 24);
+					n--;
+					col++;
+				}
+			}
+
+			writel(data, p);
+		} else {
+			int m = mtd->writesize - col;
+
+			if (col >= mtd->writesize)
+				m += mtd->oobsize;
+
+			m = min(n, m) & ~3;
+
+			DEBUG(MTD_DEBUG_LEVEL3,
+			      "%s:%d: n = %d, m = %d, i = %d, col = %d\n",
+			      __func__,  __LINE__, n, m, i, col);
+
+			memcpy(p, &buf[i], m);
+			col += m;
+			i += m;
+			n -= m;
+		}
+	}
+	/* Update saved column address */
+	host->col_addr = col;
+}
+
+/* Read the data buffer from the NAND Flash. To read the data from NAND
+ * Flash first the data output cycle is initiated by the NFC, which copies
+ * the data to RAMbuffer. This data of length len is then copied to buffer buf.
+ */
+static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	int n, col, i = 0;
+
+	DEBUG(MTD_DEBUG_LEVEL3,
+	      "mxc_nand_read_buf(col = %d, len = %d)\n", host->col_addr, len);
+
+	col = host->col_addr;
+
+	/* Adjust saved column address */
+	if (col < mtd->writesize && host->spare_only)
+		col += mtd->writesize;
+
+	n = mtd->writesize + mtd->oobsize - col;
+	n = min(len, n);
+
+	while (n) {
+		void __iomem *p;
+
+		if (col < mtd->writesize)
+			p = host->regs + MAIN_AREA0 + (col & ~3);
+		else
+			p = host->regs + SPARE_AREA0 -
+					mtd->writesize + (col & ~3);
+
+		if (((col | (int)&buf[i]) & 3) || n < 16) {
+			uint32_t data;
+
+			data = readl(p);
+			switch (col & 3) {
+			case 0:
+				if (n) {
+					buf[i++] = (uint8_t) (data);
+					n--;
+					col++;
+				}
+			case 1:
+				if (n) {
+					buf[i++] = (uint8_t) (data >> 8);
+					n--;
+					col++;
+				}
+			case 2:
+				if (n) {
+					buf[i++] = (uint8_t) (data >> 16);
+					n--;
+					col++;
+				}
+			case 3:
+				if (n) {
+					buf[i++] = (uint8_t) (data >> 24);
+					n--;
+					col++;
+				}
+			}
+		} else {
+			int m = mtd->writesize - col;
+
+			if (col >= mtd->writesize)
+				m += mtd->oobsize;
+
+			m = min(n, m) & ~3;
+			memcpy(&buf[i], p, m);
+			col += m;
+			i += m;
+			n -= m;
+		}
+	}
+	/* Update saved column address */
+	host->col_addr = col;
+
+}
+
+/* Used by the upper layer to verify the data in NAND Flash
+ * with the data in the buf. */
+static int mxc_nand_verify_buf(struct mtd_info *mtd,
+				const u_char *buf, int len)
+{
+	return -EFAULT;
+}
+
+/* This function is used by upper layer for select and
+ * deselect of the NAND chip */
+static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+
+#ifdef CONFIG_MTD_NAND_MXC_FORCE_CE
+	if (chip > 0) {
+		DEBUG(MTD_DEBUG_LEVEL0,
+		      "ERROR:  Illegal chip select (chip = %d)\n", chip);
+		return;
+	}
+
+	if (chip == -1) {
+		writew(readw(host->regs + NFC_CONFIG1) & ~NFC_CE,
+				host->regs + NFC_CONFIG1);
+		return;
+	}
+
+	writew(readw(host->regs + NFC_CONFIG1) | NFC_CE,
+			host->regs + NFC_CONFIG1);
+#endif
+
+	switch (chip) {
+	case -1:
+		/* Disable the NFC clock */
+		if (host->clk_act) {
+			clk_disable(host->clk);
+			host->clk_act = 0;
+		}
+		break;
+	case 0:
+		/* Enable the NFC clock */
+		if (!host->clk_act) {
+			clk_enable(host->clk);
+			host->clk_act = 1;
+		}
+		break;
+
+	default:
+		break;
+	}
+}
+
+/* Used by the upper layer to write command to NAND Flash for
+ * different operations to be carried out on NAND Flash */
+static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
+				int column, int page_addr)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	int useirq = true;
+
+	DEBUG(MTD_DEBUG_LEVEL3,
+	      "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
+	      command, column, page_addr);
+
+	/* Reset command state information */
+	host->status_request = false;
+
+	/* Command pre-processing step */
+	switch (command) {
+
+	case NAND_CMD_STATUS:
+		host->col_addr = 0;
+		host->status_request = true;
+		break;
+
+	case NAND_CMD_READ0:
+		host->col_addr = column;
+		host->spare_only = false;
+		useirq = false;
+		break;
+
+	case NAND_CMD_READOOB:
+		host->col_addr = column;
+		host->spare_only = true;
+		useirq = false;
+		if (host->pagesize_2k)
+			command = NAND_CMD_READ0; /* only READ0 is valid */
+		break;
+
+	case NAND_CMD_SEQIN:
+		if (column >= mtd->writesize) {
+			/*
+			 * FIXME: before send SEQIN command for write OOB,
+			 * We must read one page out.
+			 * For K9F1GXX has no READ1 command to set current HW
+			 * pointer to spare area, we must write the whole page
+			 * including OOB together.
+			 */
+			if (host->pagesize_2k)
+				/* call ourself to read a page */
+				mxc_nand_command(mtd, NAND_CMD_READ0, 0,
+						page_addr);
+
+			host->col_addr = column - mtd->writesize;
+			host->spare_only = true;
+
+			/* Set program pointer to spare region */
+			if (!host->pagesize_2k)
+				send_cmd(host, NAND_CMD_READOOB, false);
+		} else {
+			host->spare_only = false;
+			host->col_addr = column;
+
+			/* Set program pointer to page start */
+			if (!host->pagesize_2k)
+				send_cmd(host, NAND_CMD_READ0, false);
+		}
+		useirq = false;
+		break;
+
+	case NAND_CMD_PAGEPROG:
+		send_prog_page(host, 0, host->spare_only);
+
+		if (host->pagesize_2k) {
+			/* data in 4 areas datas */
+			send_prog_page(host, 1, host->spare_only);
+			send_prog_page(host, 2, host->spare_only);
+			send_prog_page(host, 3, host->spare_only);
+		}
+
+		break;
+
+	case NAND_CMD_ERASE1:
+		useirq = false;
+		break;
+	}
+
+	/* Write out the command to the device. */
+	send_cmd(host, command, useirq);
+
+	/* Write out column address, if necessary */
+	if (column != -1) {
+		/*
+		 * MXC NANDFC can only perform full page+spare or
+		 * spare-only read/write.  When the upper layers
+		 * layers perform a read/write buf operation,
+		 * we will used the saved column adress to index into
+		 * the full page.
+		 */
+		send_addr(host, 0, page_addr == -1);
+		if (host->pagesize_2k)
+			/* another col addr cycle for 2k page */
+			send_addr(host, 0, false);
+	}
+
+	/* Write out page address, if necessary */
+	if (page_addr != -1) {
+		/* paddr_0 - p_addr_7 */
+		send_addr(host, (page_addr & 0xff), false);
+
+		if (host->pagesize_2k) {
+			send_addr(host, (page_addr >> 8) & 0xFF, false);
+			if (mtd->size >= 0x40000000)
+				send_addr(host, (page_addr >> 16) & 0xff, true);
+		} else {
+			/* One more address cycle for higher density devices */
+			if (mtd->size >= 0x4000000) {
+				/* paddr_8 - paddr_15 */
+				send_addr(host, (page_addr >> 8) & 0xff, false);
+				send_addr(host, (page_addr >> 16) & 0xff, true);
+			} else
+				/* paddr_8 - paddr_15 */
+				send_addr(host, (page_addr >> 8) & 0xff, true);
+		}
+	}
+
+	/* Command post-processing step */
+	switch (command) {
+
+	case NAND_CMD_RESET:
+		break;
+
+	case NAND_CMD_READOOB:
+	case NAND_CMD_READ0:
+		if (host->pagesize_2k) {
+			/* send read confirm command */
+			send_cmd(host, NAND_CMD_READSTART, true);
+			/* read for each AREA */
+			send_read_page(host, 0, host->spare_only);
+			send_read_page(host, 1, host->spare_only);
+			send_read_page(host, 2, host->spare_only);
+			send_read_page(host, 3, host->spare_only);
+		} else
+			send_read_page(host, 0, host->spare_only);
+		break;
+
+	case NAND_CMD_READID:
+		send_read_id(host);
+		break;
+
+	case NAND_CMD_PAGEPROG:
+		break;
+
+	case NAND_CMD_STATUS:
+		break;
+
+	case NAND_CMD_ERASE2:
+		break;
+	}
+}
+
+static int __init mxcnd_probe(struct platform_device *pdev)
+{
+	struct nand_chip *this;
+	struct mtd_info *mtd;
+	struct mxc_nand_platform_data *pdata = pdev->dev.platform_data;
+	struct mxc_nand_host *host;
+	struct resource *res;
+	uint16_t tmp;
+	int err = 0, nr_parts = 0;
+
+	/* Allocate memory for MTD device structure and private data */
+	host = kzalloc(sizeof(struct mxc_nand_host), GFP_KERNEL);
+	if (!host)
+		return -ENOMEM;
+
+	host->dev = &pdev->dev;
+	/* structures must be linked */
+	this = &host->nand;
+	mtd = &host->mtd;
+	mtd->priv = this;
+	mtd->owner = THIS_MODULE;
+
+	/* 50 us command delay time */
+	this->chip_delay = 5;
+
+	this->priv = host;
+	this->dev_ready = mxc_nand_dev_ready;
+	this->cmdfunc = mxc_nand_command;
+	this->select_chip = mxc_nand_select_chip;
+	this->read_byte = mxc_nand_read_byte;
+	this->read_word = mxc_nand_read_word;
+	this->write_buf = mxc_nand_write_buf;
+	this->read_buf = mxc_nand_read_buf;
+	this->verify_buf = mxc_nand_verify_buf;
+
+	host->clk = clk_get(&pdev->dev, "nfc_clk");
+	if (IS_ERR(host->clk))
+		goto eclk;
+
+	clk_enable(host->clk);
+	host->clk_act = 1;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		err = -ENODEV;
+		goto eres;
+	}
+
+	host->regs = ioremap(res->start, res->end - res->start + 1);
+	if (!host->regs) {
+		err = -EIO;
+		goto eres;
+	}
+
+	tmp = readw(host->regs + NFC_CONFIG1);
+	tmp |= NFC_INT_MSK;
+	writew(tmp, host->regs + NFC_CONFIG1);
+
+	init_waitqueue_head(&host->irq_waitq);
+
+	host->irq = platform_get_irq(pdev, 0);
+
+	err = request_irq(host->irq, mxc_nfc_irq, 0, "mxc_nd", host);
+	if (err)
+		goto eirq;
+
+	if (pdata->hw_ecc) {
+		this->ecc.calculate = mxc_nand_calculate_ecc;
+		this->ecc.hwctl = mxc_nand_enable_hwecc;
+		this->ecc.correct = mxc_nand_correct_data;
+		this->ecc.mode = NAND_ECC_HW;
+		this->ecc.size = 512;
+		this->ecc.bytes = 3;
+		this->ecc.layout = &nand_hw_eccoob_8;
+		tmp = readw(host->regs + NFC_CONFIG1);
+		tmp |= NFC_ECC_EN;
+		writew(tmp, host->regs + NFC_CONFIG1);
+	} else {
+		this->ecc.size = 512;
+		this->ecc.bytes = 3;
+		this->ecc.layout = &nand_hw_eccoob_8;
+		this->ecc.mode = NAND_ECC_SOFT;
+		tmp = readw(host->regs + NFC_CONFIG1);
+		tmp &= ~NFC_ECC_EN;
+		writew(tmp, host->regs + NFC_CONFIG1);
+	}
+
+	/* Reset NAND */
+	this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+	/* preset operation */
+	/* Unlock the internal RAM Buffer */
+	writew(0x2, host->regs + NFC_CONFIG);
+
+	/* Blocks to be unlocked */
+	writew(0x0, host->regs + NFC_UNLOCKSTART_BLKADDR);
+	writew(0x4000, host->regs + NFC_UNLOCKEND_BLKADDR);
+
+	/* Unlock Block Command for given address range */
+	writew(0x4, host->regs + NFC_WRPROT);
+
+	/* NAND bus width determines access funtions used by upper layer */
+	if (pdata->width == 2) {
+		this->options |= NAND_BUSWIDTH_16;
+		this->ecc.layout = &nand_hw_eccoob_16;
+	}
+
+	host->pagesize_2k = 0;
+
+	/* Scan to find existence of the device */
+	if (nand_scan(mtd, 1)) {
+		DEBUG(MTD_DEBUG_LEVEL0,
+		      "MXC_ND: Unable to find any NAND device.\n");
+		err = -ENXIO;
+		goto escan;
+	}
+
+	/* Register the partitions */
+#ifdef CONFIG_MTD_PARTITIONS
+	nr_parts =
+	    parse_mtd_partitions(mtd, part_probes, &host->parts, 0);
+	if (nr_parts > 0)
+		add_mtd_partitions(mtd, host->parts, nr_parts);
+	else
+#endif
+	{
+		pr_info("Registering %s as whole device\n", mtd->name);
+		add_mtd_device(mtd);
+	}
+
+	platform_set_drvdata(pdev, host);
+
+	return 0;
+
+escan:
+	free_irq(host->irq, NULL);
+eirq:
+	iounmap(host->regs);
+eres:
+	clk_put(host->clk);
+eclk:
+	kfree(host);
+
+	return err;
+}
+
+static int __devexit mxcnd_remove(struct platform_device *pdev)
+{
+	struct mxc_nand_host *host = platform_get_drvdata(pdev);
+
+	clk_put(host->clk);
+
+	platform_set_drvdata(pdev, NULL);
+
+	nand_release(&host->mtd);
+	free_irq(host->irq, NULL);
+	iounmap(host->regs);
+	kfree(host);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct mtd_info *info = platform_get_drvdata(pdev);
+	int ret = 0;
+
+	DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n");
+	if (info)
+		ret = info->suspend(info);
+
+	/* Disable the NFC clock */
+	clk_disable(nfc_clk);	/* FIXME */
+
+	return ret;
+}
+
+static int mxcnd_resume(struct platform_device *pdev)
+{
+	struct mtd_info *info = platform_get_drvdata(pdev);
+	int ret = 0;
+
+	DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n");
+	/* Enable the NFC clock */
+	clk_enable(nfc_clk);	/* FIXME */
+
+	if (info)
+		info->resume(info);
+
+	return ret;
+}
+
+#else
+# define mxcnd_suspend   NULL
+# define mxcnd_resume    NULL
+#endif				/* CONFIG_PM */
+
+static struct platform_driver mxcnd_driver = {
+	.driver = {
+		   .name = DRIVER_NAME,
+		   },
+	.remove = __exit_p(mxcnd_remove),
+	.suspend = mxcnd_suspend,
+	.resume = mxcnd_resume,
+};
+
+static int __init mxc_nd_init(void)
+{
+	/* Register the device driver structure. */
+	pr_info("MXC MTD nand Driver\n");
+	if (platform_driver_probe(&mxcnd_driver, mxcnd_probe) != 0) {
+		printk(KERN_ERR "Driver register failed for mxcnd_driver\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static void __exit mxc_nd_cleanup(void)
+{
+	/* Unregister the device structure */
+	platform_driver_unregister(&mxcnd_driver);
+}
+
+module_init(mxc_nd_init);
+module_exit(mxc_nd_cleanup);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("MXC NAND MTD driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index d1129bae6c27..0a9c9cd33f96 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -801,9 +801,9 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
  * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function
  * @mtd:	mtd info structure
  * @chip:	nand chip info structure
- * @dataofs	offset of requested data within the page
- * @readlen	data length
- * @buf:	buffer to store read data
+ * @data_offs:	offset of requested data within the page
+ * @readlen:	data length
+ * @bufpoi:	buffer to store read data
  */
 static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
 {
@@ -2042,7 +2042,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 		return -EINVAL;
 	}
 
-	instr->fail_addr = 0xffffffff;
+	instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
 
 	/* Grab the lock and see if the device is available */
 	nand_get_device(chip, mtd, FL_ERASING);
@@ -2318,6 +2318,12 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 	/* Select the device */
 	chip->select_chip(mtd, 0);
 
+	/*
+	 * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
+	 * after power-up
+	 */
+	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
 	/* Send the command for reading device ID */
 	chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
 
@@ -2488,6 +2494,8 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips)
 	/* Check for a chip array */
 	for (i = 1; i < maxchips; i++) {
 		chip->select_chip(mtd, i);
+		/* See comment in nand_get_flash_type for reset */
+		chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
 		/* Send the command for reading device ID */
 		chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
 		/* Read manufacturer and device IDs */
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 918a806a8471..868147acce2c 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -1,13 +1,18 @@
 /*
- * This file contains an ECC algorithm from Toshiba that detects and
- * corrects 1 bit errors in a 256 byte block of data.
+ * This file contains an ECC algorithm that detects and corrects 1 bit
+ * errors in a 256 byte block of data.
  *
  * drivers/mtd/nand/nand_ecc.c
  *
- * Copyright (C) 2000-2004 Steven J. Hill (sjhill@realitydiluted.com)
- *                         Toshiba America Electronics Components, Inc.
+ * Copyright © 2008 Koninklijke Philips Electronics NV.
+ *                  Author: Frans Meulenbroeks
  *
- * Copyright (C) 2006 Thomas Gleixner <tglx@linutronix.de>
+ * Completely replaces the previous ECC implementation which was written by:
+ *   Steven J. Hill (sjhill@realitydiluted.com)
+ *   Thomas Gleixner (tglx@linutronix.de)
+ *
+ * Information on how this algorithm works and how it was developed
+ * can be found in Documentation/mtd/nand_ecc.txt
  *
  * This file is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -23,174 +28,475 @@
  * with this file; if not, write to the Free Software Foundation, Inc.,
  * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
  *
- * As a special exception, if other files instantiate templates or use
- * macros or inline functions from these files, or you compile these
- * files and link them with other works to produce a work based on these
- * files, these files do not by themselves cause the resulting work to be
- * covered by the GNU General Public License. However the source code for
- * these files must still be made available in accordance with section (3)
- * of the GNU General Public License.
- *
- * This exception does not invalidate any other reasons why a work based on
- * this file might be covered by the GNU General Public License.
  */
 
+/*
+ * The STANDALONE macro is useful when running the code outside the kernel
+ * e.g. when running the code in a testbed or a benchmark program.
+ * When STANDALONE is used, the module related macros are commented out
+ * as well as the linux include files.
+ * Instead a private definition of mtd_info is given to satisfy the compiler
+ * (the code does not use mtd_info, so the code does not care)
+ */
+#ifndef STANDALONE
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
+#include <asm/byteorder.h>
+#else
+#include <stdint.h>
+struct mtd_info;
+#define EXPORT_SYMBOL(x)  /* x */
+
+#define MODULE_LICENSE(x)	/* x */
+#define MODULE_AUTHOR(x)	/* x */
+#define MODULE_DESCRIPTION(x)	/* x */
+
+#define printk printf
+#define KERN_ERR		""
+#endif
+
+/*
+ * invparity is a 256 byte table that contains the odd parity
+ * for each byte. So if the number of bits in a byte is even,
+ * the array element is 1, and when the number of bits is odd
+ * the array eleemnt is 0.
+ */
+static const char invparity[256] = {
+	1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+	0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+	0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+	1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+	0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+	1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+	1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+	0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+	0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+	1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+	1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+	0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+	1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+	0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+	0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+	1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1
+};
+
+/*
+ * bitsperbyte contains the number of bits per byte
+ * this is only used for testing and repairing parity
+ * (a precalculated value slightly improves performance)
+ */
+static const char bitsperbyte[256] = {
+	0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4,
+	1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+	1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+	1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+	3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+	1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+	3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+	3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+	3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+	4, 5, 5, 6, 5, 6, 6, 7, 5, 6, 6, 7, 6, 7, 7, 8,
+};
 
 /*
- * Pre-calculated 256-way 1 byte column parity
+ * addressbits is a lookup table to filter out the bits from the xor-ed
+ * ecc data that identify the faulty location.
+ * this is only used for repairing parity
+ * see the comments in nand_correct_data for more details
  */
-static const u_char nand_ecc_precalc_table[] = {
-	0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00,
-	0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
-	0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
-	0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
-	0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
-	0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
-	0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
-	0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
-	0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
-	0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
-	0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
-	0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
-	0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
-	0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
-	0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
-	0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
+static const char addressbits[256] = {
+	0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
+	0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
+	0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
+	0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
+	0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
+	0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
+	0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
+	0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
+	0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
+	0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
+	0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
+	0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
+	0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
+	0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
+	0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
+	0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
+	0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
+	0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
+	0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
+	0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
+	0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
+	0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f,
+	0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
+	0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f,
+	0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
+	0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
+	0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
+	0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
+	0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
+	0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f,
+	0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
+	0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f
 };
 
 /**
- * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256-byte block
+ * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
+ *			 block
  * @mtd:	MTD block structure
- * @dat:	raw data
- * @ecc_code:	buffer for ECC
+ * @buf:	input buffer with raw data
+ * @code:	output buffer with ECC
  */
-int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
-		       u_char *ecc_code)
+int nand_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf,
+		       unsigned char *code)
 {
-	uint8_t idx, reg1, reg2, reg3, tmp1, tmp2;
 	int i;
+	const uint32_t *bp = (uint32_t *)buf;
+	/* 256 or 512 bytes/ecc  */
+	const uint32_t eccsize_mult =
+			(((struct nand_chip *)mtd->priv)->ecc.size) >> 8;
+	uint32_t cur;		/* current value in buffer */
+	/* rp0..rp15..rp17 are the various accumulated parities (per byte) */
+	uint32_t rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
+	uint32_t rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15, rp16;
+	uint32_t uninitialized_var(rp17);	/* to make compiler happy */
+	uint32_t par;		/* the cumulative parity for all data */
+	uint32_t tmppar;	/* the cumulative parity for this iteration;
+				   for rp12, rp14 and rp16 at the end of the
+				   loop */
+
+	par = 0;
+	rp4 = 0;
+	rp6 = 0;
+	rp8 = 0;
+	rp10 = 0;
+	rp12 = 0;
+	rp14 = 0;
+	rp16 = 0;
+
+	/*
+	 * The loop is unrolled a number of times;
+	 * This avoids if statements to decide on which rp value to update
+	 * Also we process the data by longwords.
+	 * Note: passing unaligned data might give a performance penalty.
+	 * It is assumed that the buffers are aligned.
+	 * tmppar is the cumulative sum of this iteration.
+	 * needed for calculating rp12, rp14, rp16 and par
+	 * also used as a performance improvement for rp6, rp8 and rp10
+	 */
+	for (i = 0; i < eccsize_mult << 2; i++) {
+		cur = *bp++;
+		tmppar = cur;
+		rp4 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp6 ^= tmppar;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp4 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp8 ^= tmppar;
 
-	/* Initialize variables */
-	reg1 = reg2 = reg3 = 0;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp4 ^= cur;
+		rp6 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp6 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp4 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp10 ^= tmppar;
 
-	/* Build up column parity */
-	for(i = 0; i < 256; i++) {
-		/* Get CP0 - CP5 from table */
-		idx = nand_ecc_precalc_table[*dat++];
-		reg1 ^= (idx & 0x3f);
+		cur = *bp++;
+		tmppar ^= cur;
+		rp4 ^= cur;
+		rp6 ^= cur;
+		rp8 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp6 ^= cur;
+		rp8 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp4 ^= cur;
+		rp8 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp8 ^= cur;
 
-		/* All bit XOR = 1 ? */
-		if (idx & 0x40) {
-			reg3 ^= (uint8_t) i;
-			reg2 ^= ~((uint8_t) i);
-		}
+		cur = *bp++;
+		tmppar ^= cur;
+		rp4 ^= cur;
+		rp6 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp6 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp4 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+
+		par ^= tmppar;
+		if ((i & 0x1) == 0)
+			rp12 ^= tmppar;
+		if ((i & 0x2) == 0)
+			rp14 ^= tmppar;
+		if (eccsize_mult == 2 && (i & 0x4) == 0)
+			rp16 ^= tmppar;
 	}
 
-	/* Create non-inverted ECC code from line parity */
-	tmp1  = (reg3 & 0x80) >> 0; /* B7 -> B7 */
-	tmp1 |= (reg2 & 0x80) >> 1; /* B7 -> B6 */
-	tmp1 |= (reg3 & 0x40) >> 1; /* B6 -> B5 */
-	tmp1 |= (reg2 & 0x40) >> 2; /* B6 -> B4 */
-	tmp1 |= (reg3 & 0x20) >> 2; /* B5 -> B3 */
-	tmp1 |= (reg2 & 0x20) >> 3; /* B5 -> B2 */
-	tmp1 |= (reg3 & 0x10) >> 3; /* B4 -> B1 */
-	tmp1 |= (reg2 & 0x10) >> 4; /* B4 -> B0 */
-
-	tmp2  = (reg3 & 0x08) << 4; /* B3 -> B7 */
-	tmp2 |= (reg2 & 0x08) << 3; /* B3 -> B6 */
-	tmp2 |= (reg3 & 0x04) << 3; /* B2 -> B5 */
-	tmp2 |= (reg2 & 0x04) << 2; /* B2 -> B4 */
-	tmp2 |= (reg3 & 0x02) << 2; /* B1 -> B3 */
-	tmp2 |= (reg2 & 0x02) << 1; /* B1 -> B2 */
-	tmp2 |= (reg3 & 0x01) << 1; /* B0 -> B1 */
-	tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */
-
-	/* Calculate final ECC code */
-#ifdef CONFIG_MTD_NAND_ECC_SMC
-	ecc_code[0] = ~tmp2;
-	ecc_code[1] = ~tmp1;
+	/*
+	 * handle the fact that we use longword operations
+	 * we'll bring rp4..rp14..rp16 back to single byte entities by
+	 * shifting and xoring first fold the upper and lower 16 bits,
+	 * then the upper and lower 8 bits.
+	 */
+	rp4 ^= (rp4 >> 16);
+	rp4 ^= (rp4 >> 8);
+	rp4 &= 0xff;
+	rp6 ^= (rp6 >> 16);
+	rp6 ^= (rp6 >> 8);
+	rp6 &= 0xff;
+	rp8 ^= (rp8 >> 16);
+	rp8 ^= (rp8 >> 8);
+	rp8 &= 0xff;
+	rp10 ^= (rp10 >> 16);
+	rp10 ^= (rp10 >> 8);
+	rp10 &= 0xff;
+	rp12 ^= (rp12 >> 16);
+	rp12 ^= (rp12 >> 8);
+	rp12 &= 0xff;
+	rp14 ^= (rp14 >> 16);
+	rp14 ^= (rp14 >> 8);
+	rp14 &= 0xff;
+	if (eccsize_mult == 2) {
+		rp16 ^= (rp16 >> 16);
+		rp16 ^= (rp16 >> 8);
+		rp16 &= 0xff;
+	}
+
+	/*
+	 * we also need to calculate the row parity for rp0..rp3
+	 * This is present in par, because par is now
+	 * rp3 rp3 rp2 rp2 in little endian and
+	 * rp2 rp2 rp3 rp3 in big endian
+	 * as well as
+	 * rp1 rp0 rp1 rp0 in little endian and
+	 * rp0 rp1 rp0 rp1 in big endian
+	 * First calculate rp2 and rp3
+	 */
+#ifdef __BIG_ENDIAN
+	rp2 = (par >> 16);
+	rp2 ^= (rp2 >> 8);
+	rp2 &= 0xff;
+	rp3 = par & 0xffff;
+	rp3 ^= (rp3 >> 8);
+	rp3 &= 0xff;
 #else
-	ecc_code[0] = ~tmp1;
-	ecc_code[1] = ~tmp2;
+	rp3 = (par >> 16);
+	rp3 ^= (rp3 >> 8);
+	rp3 &= 0xff;
+	rp2 = par & 0xffff;
+	rp2 ^= (rp2 >> 8);
+	rp2 &= 0xff;
 #endif
-	ecc_code[2] = ((~reg1) << 2) | 0x03;
 
-	return 0;
-}
-EXPORT_SYMBOL(nand_calculate_ecc);
+	/* reduce par to 16 bits then calculate rp1 and rp0 */
+	par ^= (par >> 16);
+#ifdef __BIG_ENDIAN
+	rp0 = (par >> 8) & 0xff;
+	rp1 = (par & 0xff);
+#else
+	rp1 = (par >> 8) & 0xff;
+	rp0 = (par & 0xff);
+#endif
 
-static inline int countbits(uint32_t byte)
-{
-	int res = 0;
+	/* finally reduce par to 8 bits */
+	par ^= (par >> 8);
+	par &= 0xff;
 
-	for (;byte; byte >>= 1)
-		res += byte & 0x01;
-	return res;
+	/*
+	 * and calculate rp5..rp15..rp17
+	 * note that par = rp4 ^ rp5 and due to the commutative property
+	 * of the ^ operator we can say:
+	 * rp5 = (par ^ rp4);
+	 * The & 0xff seems superfluous, but benchmarking learned that
+	 * leaving it out gives slightly worse results. No idea why, probably
+	 * it has to do with the way the pipeline in pentium is organized.
+	 */
+	rp5 = (par ^ rp4) & 0xff;
+	rp7 = (par ^ rp6) & 0xff;
+	rp9 = (par ^ rp8) & 0xff;
+	rp11 = (par ^ rp10) & 0xff;
+	rp13 = (par ^ rp12) & 0xff;
+	rp15 = (par ^ rp14) & 0xff;
+	if (eccsize_mult == 2)
+		rp17 = (par ^ rp16) & 0xff;
+
+	/*
+	 * Finally calculate the ecc bits.
+	 * Again here it might seem that there are performance optimisations
+	 * possible, but benchmarks showed that on the system this is developed
+	 * the code below is the fastest
+	 */
+#ifdef CONFIG_MTD_NAND_ECC_SMC
+	code[0] =
+	    (invparity[rp7] << 7) |
+	    (invparity[rp6] << 6) |
+	    (invparity[rp5] << 5) |
+	    (invparity[rp4] << 4) |
+	    (invparity[rp3] << 3) |
+	    (invparity[rp2] << 2) |
+	    (invparity[rp1] << 1) |
+	    (invparity[rp0]);
+	code[1] =
+	    (invparity[rp15] << 7) |
+	    (invparity[rp14] << 6) |
+	    (invparity[rp13] << 5) |
+	    (invparity[rp12] << 4) |
+	    (invparity[rp11] << 3) |
+	    (invparity[rp10] << 2) |
+	    (invparity[rp9] << 1)  |
+	    (invparity[rp8]);
+#else
+	code[1] =
+	    (invparity[rp7] << 7) |
+	    (invparity[rp6] << 6) |
+	    (invparity[rp5] << 5) |
+	    (invparity[rp4] << 4) |
+	    (invparity[rp3] << 3) |
+	    (invparity[rp2] << 2) |
+	    (invparity[rp1] << 1) |
+	    (invparity[rp0]);
+	code[0] =
+	    (invparity[rp15] << 7) |
+	    (invparity[rp14] << 6) |
+	    (invparity[rp13] << 5) |
+	    (invparity[rp12] << 4) |
+	    (invparity[rp11] << 3) |
+	    (invparity[rp10] << 2) |
+	    (invparity[rp9] << 1)  |
+	    (invparity[rp8]);
+#endif
+	if (eccsize_mult == 1)
+		code[2] =
+		    (invparity[par & 0xf0] << 7) |
+		    (invparity[par & 0x0f] << 6) |
+		    (invparity[par & 0xcc] << 5) |
+		    (invparity[par & 0x33] << 4) |
+		    (invparity[par & 0xaa] << 3) |
+		    (invparity[par & 0x55] << 2) |
+		    3;
+	else
+		code[2] =
+		    (invparity[par & 0xf0] << 7) |
+		    (invparity[par & 0x0f] << 6) |
+		    (invparity[par & 0xcc] << 5) |
+		    (invparity[par & 0x33] << 4) |
+		    (invparity[par & 0xaa] << 3) |
+		    (invparity[par & 0x55] << 2) |
+		    (invparity[rp17] << 1) |
+		    (invparity[rp16] << 0);
+	return 0;
 }
+EXPORT_SYMBOL(nand_calculate_ecc);
 
 /**
  * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
  * @mtd:	MTD block structure
- * @dat:	raw data read from the chip
+ * @buf:	raw data read from the chip
  * @read_ecc:	ECC from the chip
  * @calc_ecc:	the ECC calculated from raw data
  *
- * Detect and correct a 1 bit error for 256 byte block
+ * Detect and correct a 1 bit error for 256/512 byte block
  */
-int nand_correct_data(struct mtd_info *mtd, u_char *dat,
-		      u_char *read_ecc, u_char *calc_ecc)
+int nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
+		      unsigned char *read_ecc, unsigned char *calc_ecc)
 {
-	uint8_t s0, s1, s2;
+	unsigned char b0, b1, b2;
+	unsigned char byte_addr, bit_addr;
+	/* 256 or 512 bytes/ecc  */
+	const uint32_t eccsize_mult =
+			(((struct nand_chip *)mtd->priv)->ecc.size) >> 8;
 
+	/*
+	 * b0 to b2 indicate which bit is faulty (if any)
+	 * we might need the xor result  more than once,
+	 * so keep them in a local var
+	*/
 #ifdef CONFIG_MTD_NAND_ECC_SMC
-	s0 = calc_ecc[0] ^ read_ecc[0];
-	s1 = calc_ecc[1] ^ read_ecc[1];
-	s2 = calc_ecc[2] ^ read_ecc[2];
+	b0 = read_ecc[0] ^ calc_ecc[0];
+	b1 = read_ecc[1] ^ calc_ecc[1];
 #else
-	s1 = calc_ecc[0] ^ read_ecc[0];
-	s0 = calc_ecc[1] ^ read_ecc[1];
-	s2 = calc_ecc[2] ^ read_ecc[2];
+	b0 = read_ecc[1] ^ calc_ecc[1];
+	b1 = read_ecc[0] ^ calc_ecc[0];
 #endif
-	if ((s0 | s1 | s2) == 0)
-		return 0;
-
-	/* Check for a single bit error */
-	if( ((s0 ^ (s0 >> 1)) & 0x55) == 0x55 &&
-	    ((s1 ^ (s1 >> 1)) & 0x55) == 0x55 &&
-	    ((s2 ^ (s2 >> 1)) & 0x54) == 0x54) {
+	b2 = read_ecc[2] ^ calc_ecc[2];
 
-		uint32_t byteoffs, bitnum;
+	/* check if there are any bitfaults */
 
-		byteoffs = (s1 << 0) & 0x80;
-		byteoffs |= (s1 << 1) & 0x40;
-		byteoffs |= (s1 << 2) & 0x20;
-		byteoffs |= (s1 << 3) & 0x10;
+	/* repeated if statements are slightly more efficient than switch ... */
+	/* ordered in order of likelihood */
 
-		byteoffs |= (s0 >> 4) & 0x08;
-		byteoffs |= (s0 >> 3) & 0x04;
-		byteoffs |= (s0 >> 2) & 0x02;
-		byteoffs |= (s0 >> 1) & 0x01;
-
-		bitnum = (s2 >> 5) & 0x04;
-		bitnum |= (s2 >> 4) & 0x02;
-		bitnum |= (s2 >> 3) & 0x01;
-
-		dat[byteoffs] ^= (1 << bitnum);
+	if ((b0 | b1 | b2) == 0)
+		return 0;	/* no error */
 
+	if ((((b0 ^ (b0 >> 1)) & 0x55) == 0x55) &&
+	    (((b1 ^ (b1 >> 1)) & 0x55) == 0x55) &&
+	    ((eccsize_mult == 1 && ((b2 ^ (b2 >> 1)) & 0x54) == 0x54) ||
+	     (eccsize_mult == 2 && ((b2 ^ (b2 >> 1)) & 0x55) == 0x55))) {
+	/* single bit error */
+		/*
+		 * rp17/rp15/13/11/9/7/5/3/1 indicate which byte is the faulty
+		 * byte, cp 5/3/1 indicate the faulty bit.
+		 * A lookup table (called addressbits) is used to filter
+		 * the bits from the byte they are in.
+		 * A marginal optimisation is possible by having three
+		 * different lookup tables.
+		 * One as we have now (for b0), one for b2
+		 * (that would avoid the >> 1), and one for b1 (with all values
+		 * << 4). However it was felt that introducing two more tables
+		 * hardly justify the gain.
+		 *
+		 * The b2 shift is there to get rid of the lowest two bits.
+		 * We could also do addressbits[b2] >> 1 but for the
+		 * performace it does not make any difference
+		 */
+		if (eccsize_mult == 1)
+			byte_addr = (addressbits[b1] << 4) + addressbits[b0];
+		else
+			byte_addr = (addressbits[b2 & 0x3] << 8) +
+				    (addressbits[b1] << 4) + addressbits[b0];
+		bit_addr = addressbits[b2 >> 2];
+		/* flip the bit */
+		buf[byte_addr] ^= (1 << bit_addr);
 		return 1;
-	}
 
-	if(countbits(s0 | ((uint32_t)s1 << 8) | ((uint32_t)s2 <<16)) == 1)
-		return 1;
+	}
+	/* count nr of bits; use table lookup, faster than calculating it */
+	if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
+		return 1;	/* error in ecc data; no action needed */
 
-	return -EBADMSG;
+	printk(KERN_ERR "uncorrectable error : ");
+	return -1;
 }
 EXPORT_SYMBOL(nand_correct_data);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>");
+MODULE_AUTHOR("Frans Meulenbroeks <fransmeulenbroeks@gmail.com>");
 MODULE_DESCRIPTION("Generic NAND ECC support");
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 556e8131ecdc..ae7c57781a68 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -38,7 +38,6 @@
 #include <linux/delay.h>
 #include <linux/list.h>
 #include <linux/random.h>
-#include <asm/div64.h>
 
 /* Default simulator parameters values */
 #if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE)  || \
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index a64ad15b8fdd..c0fa9c9edf08 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -115,55 +115,11 @@ enum {
 	STATE_PIO_WRITING,
 };
 
-struct pxa3xx_nand_timing {
-	unsigned int	tCH;  /* Enable signal hold time */
-	unsigned int	tCS;  /* Enable signal setup time */
-	unsigned int	tWH;  /* ND_nWE high duration */
-	unsigned int	tWP;  /* ND_nWE pulse time */
-	unsigned int	tRH;  /* ND_nRE high duration */
-	unsigned int	tRP;  /* ND_nRE pulse width */
-	unsigned int	tR;   /* ND_nWE high to ND_nRE low for read */
-	unsigned int	tWHR; /* ND_nWE high to ND_nRE low for status read */
-	unsigned int	tAR;  /* ND_ALE low to ND_nRE low delay */
-};
-
-struct pxa3xx_nand_cmdset {
-	uint16_t	read1;
-	uint16_t	read2;
-	uint16_t	program;
-	uint16_t	read_status;
-	uint16_t	read_id;
-	uint16_t	erase;
-	uint16_t	reset;
-	uint16_t	lock;
-	uint16_t	unlock;
-	uint16_t	lock_status;
-};
-
-struct pxa3xx_nand_flash {
-	struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
-	struct pxa3xx_nand_cmdset *cmdset;
-
-	uint32_t page_per_block;/* Pages per block (PG_PER_BLK) */
-	uint32_t page_size;	/* Page size in bytes (PAGE_SZ) */
-	uint32_t flash_width;	/* Width of Flash memory (DWIDTH_M) */
-	uint32_t dfc_width;	/* Width of flash controller(DWIDTH_C) */
-	uint32_t num_blocks;	/* Number of physical blocks in Flash */
-	uint32_t chip_id;
-
-	/* NOTE: these are automatically calculated, do not define */
-	size_t		oob_size;
-	size_t		read_id_bytes;
-
-	unsigned int	col_addr_cycles;
-	unsigned int	row_addr_cycles;
-};
-
 struct pxa3xx_nand_info {
 	struct nand_chip	nand_chip;
 
 	struct platform_device	 *pdev;
-	struct pxa3xx_nand_flash *flash_info;
+	const struct pxa3xx_nand_flash *flash_info;
 
 	struct clk		*clk;
 	void __iomem		*mmio_base;
@@ -202,12 +158,20 @@ struct pxa3xx_nand_info {
 	uint32_t		ndcb0;
 	uint32_t		ndcb1;
 	uint32_t		ndcb2;
+
+	/* calculated from pxa3xx_nand_flash data */
+	size_t		oob_size;
+	size_t		read_id_bytes;
+
+	unsigned int	col_addr_cycles;
+	unsigned int	row_addr_cycles;
 };
 
 static int use_dma = 1;
 module_param(use_dma, bool, 0444);
 MODULE_PARM_DESC(use_dma, "enable DMA for data transfering to/from NAND HW");
 
+#ifdef CONFIG_MTD_NAND_PXA3xx_BUILTIN
 static struct pxa3xx_nand_cmdset smallpage_cmdset = {
 	.read1		= 0x0000,
 	.read2		= 0x0050,
@@ -291,11 +255,35 @@ static struct pxa3xx_nand_flash micron1GbX16 = {
 	.chip_id	= 0xb12c,
 };
 
+static struct pxa3xx_nand_timing stm2GbX16_timing = {
+	.tCH = 10,
+	.tCS = 35,
+	.tWH = 15,
+	.tWP = 25,
+	.tRH = 15,
+	.tRP = 25,
+	.tR = 25000,
+	.tWHR = 60,
+	.tAR = 10,
+};
+
+static struct pxa3xx_nand_flash stm2GbX16 = {
+	.timing = &stm2GbX16_timing,
+	.page_per_block = 64,
+	.page_size = 2048,
+	.flash_width = 16,
+	.dfc_width = 16,
+	.num_blocks = 2048,
+	.chip_id = 0xba20,
+};
+
 static struct pxa3xx_nand_flash *builtin_flash_types[] = {
 	&samsung512MbX16,
 	&micron1GbX8,
 	&micron1GbX16,
+	&stm2GbX16,
 };
+#endif /* CONFIG_MTD_NAND_PXA3xx_BUILTIN */
 
 #define NDTR0_tCH(c)	(min((c), 7) << 19)
 #define NDTR0_tCS(c)	(min((c), 7) << 16)
@@ -312,7 +300,7 @@ static struct pxa3xx_nand_flash *builtin_flash_types[] = {
 #define ns2cycle(ns, clk)	(int)(((ns) * (clk / 1000000) / 1000) + 1)
 
 static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
-				   struct pxa3xx_nand_timing *t)
+				   const struct pxa3xx_nand_timing *t)
 {
 	unsigned long nand_clk = clk_get_rate(info->clk);
 	uint32_t ndtr0, ndtr1;
@@ -354,8 +342,8 @@ static int wait_for_event(struct pxa3xx_nand_info *info, uint32_t event)
 static int prepare_read_prog_cmd(struct pxa3xx_nand_info *info,
 			uint16_t cmd, int column, int page_addr)
 {
-	struct pxa3xx_nand_flash *f = info->flash_info;
-	struct pxa3xx_nand_cmdset *cmdset = f->cmdset;
+	const struct pxa3xx_nand_flash *f = info->flash_info;
+	const struct pxa3xx_nand_cmdset *cmdset = f->cmdset;
 
 	/* calculate data size */
 	switch (f->page_size) {
@@ -373,14 +361,14 @@ static int prepare_read_prog_cmd(struct pxa3xx_nand_info *info,
 	info->ndcb0 = cmd | ((cmd & 0xff00) ? NDCB0_DBC : 0);
 	info->ndcb1 = 0;
 	info->ndcb2 = 0;
-	info->ndcb0 |= NDCB0_ADDR_CYC(f->row_addr_cycles + f->col_addr_cycles);
+	info->ndcb0 |= NDCB0_ADDR_CYC(info->row_addr_cycles + info->col_addr_cycles);
 
-	if (f->col_addr_cycles == 2) {
+	if (info->col_addr_cycles == 2) {
 		/* large block, 2 cycles for column address
 		 * row address starts from 3rd cycle
 		 */
 		info->ndcb1 |= (page_addr << 16) | (column & 0xffff);
-		if (f->row_addr_cycles == 3)
+		if (info->row_addr_cycles == 3)
 			info->ndcb2 = (page_addr >> 16) & 0xff;
 	} else
 		/* small block, 1 cycles for column address
@@ -406,7 +394,7 @@ static int prepare_erase_cmd(struct pxa3xx_nand_info *info,
 
 static int prepare_other_cmd(struct pxa3xx_nand_info *info, uint16_t cmd)
 {
-	struct pxa3xx_nand_cmdset *cmdset = info->flash_info->cmdset;
+	const struct pxa3xx_nand_cmdset *cmdset = info->flash_info->cmdset;
 
 	info->ndcb0 = cmd | ((cmd & 0xff00) ? NDCB0_DBC : 0);
 	info->ndcb1 = 0;
@@ -641,8 +629,8 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
 				int column, int page_addr)
 {
 	struct pxa3xx_nand_info *info = mtd->priv;
-	struct pxa3xx_nand_flash *flash_info = info->flash_info;
-	struct pxa3xx_nand_cmdset *cmdset = flash_info->cmdset;
+	const struct pxa3xx_nand_flash *flash_info = info->flash_info;
+	const struct pxa3xx_nand_cmdset *cmdset = flash_info->cmdset;
 	int ret;
 
 	info->use_dma = (use_dma) ? 1 : 0;
@@ -720,7 +708,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
 		info->use_dma = 0;	/* force PIO read */
 		info->buf_start = 0;
 		info->buf_count = (command == NAND_CMD_READID) ?
-				flash_info->read_id_bytes : 1;
+				info->read_id_bytes : 1;
 
 		if (prepare_other_cmd(info, (command == NAND_CMD_READID) ?
 				cmdset->read_id : cmdset->read_status))
@@ -861,8 +849,8 @@ static int pxa3xx_nand_ecc_correct(struct mtd_info *mtd,
 
 static int __readid(struct pxa3xx_nand_info *info, uint32_t *id)
 {
-	struct pxa3xx_nand_flash *f = info->flash_info;
-	struct pxa3xx_nand_cmdset *cmdset = f->cmdset;
+	const struct pxa3xx_nand_flash *f = info->flash_info;
+	const struct pxa3xx_nand_cmdset *cmdset = f->cmdset;
 	uint32_t ndcr;
 	uint8_t  id_buff[8];
 
@@ -891,7 +879,7 @@ fail_timeout:
 }
 
 static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
-				    struct pxa3xx_nand_flash *f)
+				    const struct pxa3xx_nand_flash *f)
 {
 	struct platform_device *pdev = info->pdev;
 	struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
@@ -904,25 +892,25 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
 		return -EINVAL;
 
 	/* calculate flash information */
-	f->oob_size = (f->page_size == 2048) ? 64 : 16;
-	f->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
+	info->oob_size = (f->page_size == 2048) ? 64 : 16;
+	info->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
 
 	/* calculate addressing information */
-	f->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
+	info->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
 
 	if (f->num_blocks * f->page_per_block > 65536)
-		f->row_addr_cycles = 3;
+		info->row_addr_cycles = 3;
 	else
-		f->row_addr_cycles = 2;
+		info->row_addr_cycles = 2;
 
 	ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
-	ndcr |= (f->col_addr_cycles == 2) ? NDCR_RA_START : 0;
+	ndcr |= (info->col_addr_cycles == 2) ? NDCR_RA_START : 0;
 	ndcr |= (f->page_per_block == 64) ? NDCR_PG_PER_BLK : 0;
 	ndcr |= (f->page_size == 2048) ? NDCR_PAGE_SZ : 0;
 	ndcr |= (f->flash_width == 16) ? NDCR_DWIDTH_M : 0;
 	ndcr |= (f->dfc_width == 16) ? NDCR_DWIDTH_C : 0;
 
-	ndcr |= NDCR_RD_ID_CNT(f->read_id_bytes);
+	ndcr |= NDCR_RD_ID_CNT(info->read_id_bytes);
 	ndcr |= NDCR_SPARE_EN; /* enable spare by default */
 
 	info->reg_ndcr = ndcr;
@@ -932,12 +920,27 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
 	return 0;
 }
 
-static int pxa3xx_nand_detect_flash(struct pxa3xx_nand_info *info)
+static int pxa3xx_nand_detect_flash(struct pxa3xx_nand_info *info,
+				    const struct pxa3xx_nand_platform_data *pdata)
 {
-	struct pxa3xx_nand_flash *f;
-	uint32_t id;
+	const struct pxa3xx_nand_flash *f;
+	uint32_t id = -1;
 	int i;
 
+	for (i = 0; i<pdata->num_flash; ++i) {
+		f = pdata->flash + i;
+
+		if (pxa3xx_nand_config_flash(info, f))
+			continue;
+
+		if (__readid(info, &id))
+			continue;
+
+		if (id == f->chip_id)
+			return 0;
+	}
+
+#ifdef CONFIG_MTD_NAND_PXA3xx_BUILTIN
 	for (i = 0; i < ARRAY_SIZE(builtin_flash_types); i++) {
 
 		f = builtin_flash_types[i];
@@ -951,7 +954,11 @@ static int pxa3xx_nand_detect_flash(struct pxa3xx_nand_info *info)
 		if (id == f->chip_id)
 			return 0;
 	}
+#endif
 
+	dev_warn(&info->pdev->dev,
+		 "failed to detect configured nand flash; found %04x instead of\n",
+		 id);
 	return -ENODEV;
 }
 
@@ -1014,7 +1021,7 @@ static struct nand_ecclayout hw_largepage_ecclayout = {
 static void pxa3xx_nand_init_mtd(struct mtd_info *mtd,
 				 struct pxa3xx_nand_info *info)
 {
-	struct pxa3xx_nand_flash *f = info->flash_info;
+	const struct pxa3xx_nand_flash *f = info->flash_info;
 	struct nand_chip *this = &info->nand_chip;
 
 	this->options = (f->flash_width == 16) ? NAND_BUSWIDTH_16: 0;
@@ -1135,7 +1142,7 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
 		goto fail_free_buf;
 	}
 
-	ret = pxa3xx_nand_detect_flash(info);
+	ret = pxa3xx_nand_detect_flash(info, pdata);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to detect flash\n");
 		ret = -ENODEV;
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
new file mode 100644
index 000000000000..821acb08ff1c
--- /dev/null
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -0,0 +1,878 @@
+/*
+ * SuperH FLCTL nand controller
+ *
+ * Copyright © 2008 Renesas Solutions Corp.
+ * Copyright © 2008 Atom Create Engineering Co., Ltd.
+ *
+ * Based on fsl_elbc_nand.c, Copyright © 2006-2007 Freescale Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/sh_flctl.h>
+
+static struct nand_ecclayout flctl_4secc_oob_16 = {
+	.eccbytes = 10,
+	.eccpos = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.oobfree = {
+		{.offset = 12,
+		. length = 4} },
+};
+
+static struct nand_ecclayout flctl_4secc_oob_64 = {
+	.eccbytes = 10,
+	.eccpos = {48, 49, 50, 51, 52, 53, 54, 55, 56, 57},
+	.oobfree = {
+		{.offset = 60,
+		. length = 4} },
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr flctl_4secc_smallpage = {
+	.options = NAND_BBT_SCAN2NDPAGE,
+	.offs = 11,
+	.len = 1,
+	.pattern = scan_ff_pattern,
+};
+
+static struct nand_bbt_descr flctl_4secc_largepage = {
+	.options = 0,
+	.offs = 58,
+	.len = 2,
+	.pattern = scan_ff_pattern,
+};
+
+static void empty_fifo(struct sh_flctl *flctl)
+{
+	writel(0x000c0000, FLINTDMACR(flctl));	/* FIFO Clear */
+	writel(0x00000000, FLINTDMACR(flctl));	/* Clear Error flags */
+}
+
+static void start_translation(struct sh_flctl *flctl)
+{
+	writeb(TRSTRT, FLTRCR(flctl));
+}
+
+static void wait_completion(struct sh_flctl *flctl)
+{
+	uint32_t timeout = LOOP_TIMEOUT_MAX;
+
+	while (timeout--) {
+		if (readb(FLTRCR(flctl)) & TREND) {
+			writeb(0x0, FLTRCR(flctl));
+			return;
+		}
+		udelay(1);
+	}
+
+	printk(KERN_ERR "wait_completion(): Timeout occured \n");
+	writeb(0x0, FLTRCR(flctl));
+}
+
+static void set_addr(struct mtd_info *mtd, int column, int page_addr)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	uint32_t addr = 0;
+
+	if (column == -1) {
+		addr = page_addr;	/* ERASE1 */
+	} else if (page_addr != -1) {
+		/* SEQIN, READ0, etc.. */
+		if (flctl->page_size) {
+			addr = column & 0x0FFF;
+			addr |= (page_addr & 0xff) << 16;
+			addr |= ((page_addr >> 8) & 0xff) << 24;
+			/* big than 128MB */
+			if (flctl->rw_ADRCNT == ADRCNT2_E) {
+				uint32_t 	addr2;
+				addr2 = (page_addr >> 16) & 0xff;
+				writel(addr2, FLADR2(flctl));
+			}
+		} else {
+			addr = column;
+			addr |= (page_addr & 0xff) << 8;
+			addr |= ((page_addr >> 8) & 0xff) << 16;
+			addr |= ((page_addr >> 16) & 0xff) << 24;
+		}
+	}
+	writel(addr, FLADR(flctl));
+}
+
+static void wait_rfifo_ready(struct sh_flctl *flctl)
+{
+	uint32_t timeout = LOOP_TIMEOUT_MAX;
+
+	while (timeout--) {
+		uint32_t val;
+		/* check FIFO */
+		val = readl(FLDTCNTR(flctl)) >> 16;
+		if (val & 0xFF)
+			return;
+		udelay(1);
+	}
+	printk(KERN_ERR "wait_rfifo_ready(): Timeout occured \n");
+}
+
+static void wait_wfifo_ready(struct sh_flctl *flctl)
+{
+	uint32_t len, timeout = LOOP_TIMEOUT_MAX;
+
+	while (timeout--) {
+		/* check FIFO */
+		len = (readl(FLDTCNTR(flctl)) >> 16) & 0xFF;
+		if (len >= 4)
+			return;
+		udelay(1);
+	}
+	printk(KERN_ERR "wait_wfifo_ready(): Timeout occured \n");
+}
+
+static int wait_recfifo_ready(struct sh_flctl *flctl)
+{
+	uint32_t timeout = LOOP_TIMEOUT_MAX;
+	int checked[4];
+	void __iomem *ecc_reg[4];
+	int i;
+	uint32_t data, size;
+
+	memset(checked, 0, sizeof(checked));
+
+	while (timeout--) {
+		size = readl(FLDTCNTR(flctl)) >> 24;
+		if (size & 0xFF)
+			return 0;	/* success */
+
+		if (readl(FL4ECCCR(flctl)) & _4ECCFA)
+			return 1;	/* can't correct */
+
+		udelay(1);
+		if (!(readl(FL4ECCCR(flctl)) & _4ECCEND))
+			continue;
+
+		/* start error correction */
+		ecc_reg[0] = FL4ECCRESULT0(flctl);
+		ecc_reg[1] = FL4ECCRESULT1(flctl);
+		ecc_reg[2] = FL4ECCRESULT2(flctl);
+		ecc_reg[3] = FL4ECCRESULT3(flctl);
+
+		for (i = 0; i < 3; i++) {
+			data = readl(ecc_reg[i]);
+			if (data != INIT_FL4ECCRESULT_VAL && !checked[i]) {
+				uint8_t org;
+				int index;
+
+				index = data >> 16;
+				org = flctl->done_buff[index];
+				flctl->done_buff[index] = org ^ (data & 0xFF);
+				checked[i] = 1;
+			}
+		}
+
+		writel(0, FL4ECCCR(flctl));
+	}
+
+	printk(KERN_ERR "wait_recfifo_ready(): Timeout occured \n");
+	return 1;	/* timeout */
+}
+
+static void wait_wecfifo_ready(struct sh_flctl *flctl)
+{
+	uint32_t timeout = LOOP_TIMEOUT_MAX;
+	uint32_t len;
+
+	while (timeout--) {
+		/* check FLECFIFO */
+		len = (readl(FLDTCNTR(flctl)) >> 24) & 0xFF;
+		if (len >= 4)
+			return;
+		udelay(1);
+	}
+	printk(KERN_ERR "wait_wecfifo_ready(): Timeout occured \n");
+}
+
+static void read_datareg(struct sh_flctl *flctl, int offset)
+{
+	unsigned long data;
+	unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
+
+	wait_completion(flctl);
+
+	data = readl(FLDATAR(flctl));
+	*buf = le32_to_cpu(data);
+}
+
+static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
+{
+	int i, len_4align;
+	unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
+	void *fifo_addr = (void *)FLDTFIFO(flctl);
+
+	len_4align = (rlen + 3) / 4;
+
+	for (i = 0; i < len_4align; i++) {
+		wait_rfifo_ready(flctl);
+		buf[i] = readl(fifo_addr);
+		buf[i] = be32_to_cpu(buf[i]);
+	}
+}
+
+static int read_ecfiforeg(struct sh_flctl *flctl, uint8_t *buff)
+{
+	int i;
+	unsigned long *ecc_buf = (unsigned long *)buff;
+	void *fifo_addr = (void *)FLECFIFO(flctl);
+
+	for (i = 0; i < 4; i++) {
+		if (wait_recfifo_ready(flctl))
+			return 1;
+		ecc_buf[i] = readl(fifo_addr);
+		ecc_buf[i] = be32_to_cpu(ecc_buf[i]);
+	}
+
+	return 0;
+}
+
+static void write_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
+{
+	int i, len_4align;
+	unsigned long *data = (unsigned long *)&flctl->done_buff[offset];
+	void *fifo_addr = (void *)FLDTFIFO(flctl);
+
+	len_4align = (rlen + 3) / 4;
+	for (i = 0; i < len_4align; i++) {
+		wait_wfifo_ready(flctl);
+		writel(cpu_to_be32(data[i]), fifo_addr);
+	}
+}
+
+static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	uint32_t flcmncr_val = readl(FLCMNCR(flctl));
+	uint32_t flcmdcr_val, addr_len_bytes = 0;
+
+	/* Set SNAND bit if page size is 2048byte */
+	if (flctl->page_size)
+		flcmncr_val |= SNAND_E;
+	else
+		flcmncr_val &= ~SNAND_E;
+
+	/* default FLCMDCR val */
+	flcmdcr_val = DOCMD1_E | DOADR_E;
+
+	/* Set for FLCMDCR */
+	switch (cmd) {
+	case NAND_CMD_ERASE1:
+		addr_len_bytes = flctl->erase_ADRCNT;
+		flcmdcr_val |= DOCMD2_E;
+		break;
+	case NAND_CMD_READ0:
+	case NAND_CMD_READOOB:
+		addr_len_bytes = flctl->rw_ADRCNT;
+		flcmdcr_val |= CDSRC_E;
+		break;
+	case NAND_CMD_SEQIN:
+		/* This case is that cmd is READ0 or READ1 or READ00 */
+		flcmdcr_val &= ~DOADR_E;	/* ONLY execute 1st cmd */
+		break;
+	case NAND_CMD_PAGEPROG:
+		addr_len_bytes = flctl->rw_ADRCNT;
+		flcmdcr_val |= DOCMD2_E | CDSRC_E | SELRW;
+		break;
+	case NAND_CMD_READID:
+		flcmncr_val &= ~SNAND_E;
+		addr_len_bytes = ADRCNT_1;
+		break;
+	case NAND_CMD_STATUS:
+	case NAND_CMD_RESET:
+		flcmncr_val &= ~SNAND_E;
+		flcmdcr_val &= ~(DOADR_E | DOSR_E);
+		break;
+	default:
+		break;
+	}
+
+	/* Set address bytes parameter */
+	flcmdcr_val |= addr_len_bytes;
+
+	/* Now actually write */
+	writel(flcmncr_val, FLCMNCR(flctl));
+	writel(flcmdcr_val, FLCMDCR(flctl));
+	writel(flcmcdr_val, FLCMCDR(flctl));
+}
+
+static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+				uint8_t *buf)
+{
+	int i, eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccsteps = chip->ecc.steps;
+	uint8_t *p = buf;
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+
+	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
+		chip->read_buf(mtd, p, eccsize);
+
+	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+		if (flctl->hwecc_cant_correct[i])
+			mtd->ecc_stats.failed++;
+		else
+			mtd->ecc_stats.corrected += 0;
+	}
+
+	return 0;
+}
+
+static void flctl_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+				   const uint8_t *buf)
+{
+	int i, eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccsteps = chip->ecc.steps;
+	const uint8_t *p = buf;
+
+	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
+		chip->write_buf(mtd, p, eccsize);
+}
+
+static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	int sector, page_sectors;
+
+	if (flctl->page_size)
+		page_sectors = 4;
+	else
+		page_sectors = 1;
+
+	writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE | _4ECCCORRECT,
+		 FLCMNCR(flctl));
+
+	set_cmd_regs(mtd, NAND_CMD_READ0,
+		(NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
+
+	for (sector = 0; sector < page_sectors; sector++) {
+		int ret;
+
+		empty_fifo(flctl);
+		writel(readl(FLCMDCR(flctl)) | 1, FLCMDCR(flctl));
+		writel(page_addr << 2 | sector, FLADR(flctl));
+
+		start_translation(flctl);
+		read_fiforeg(flctl, 512, 512 * sector);
+
+		ret = read_ecfiforeg(flctl,
+			&flctl->done_buff[mtd->writesize + 16 * sector]);
+
+		if (ret)
+			flctl->hwecc_cant_correct[sector] = 1;
+
+		writel(0x0, FL4ECCCR(flctl));
+		wait_completion(flctl);
+	}
+	writel(readl(FLCMNCR(flctl)) & ~(ACM_SACCES_MODE | _4ECCCORRECT),
+			FLCMNCR(flctl));
+}
+
+static void execmd_read_oob(struct mtd_info *mtd, int page_addr)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+
+	set_cmd_regs(mtd, NAND_CMD_READ0,
+		(NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
+
+	empty_fifo(flctl);
+	if (flctl->page_size) {
+		int i;
+		/* In case that the page size is 2k */
+		for (i = 0; i < 16 * 3; i++)
+			flctl->done_buff[i] = 0xFF;
+
+		set_addr(mtd, 3 * 528 + 512, page_addr);
+		writel(16, FLDTCNTR(flctl));
+
+		start_translation(flctl);
+		read_fiforeg(flctl, 16, 16 * 3);
+		wait_completion(flctl);
+	} else {
+		/* In case that the page size is 512b */
+		set_addr(mtd, 512, page_addr);
+		writel(16, FLDTCNTR(flctl));
+
+		start_translation(flctl);
+		read_fiforeg(flctl, 16, 0);
+		wait_completion(flctl);
+	}
+}
+
+static void execmd_write_page_sector(struct mtd_info *mtd)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	int i, page_addr = flctl->seqin_page_addr;
+	int sector, page_sectors;
+
+	if (flctl->page_size)
+		page_sectors = 4;
+	else
+		page_sectors = 1;
+
+	writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE, FLCMNCR(flctl));
+
+	set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
+			(NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
+
+	for (sector = 0; sector < page_sectors; sector++) {
+		empty_fifo(flctl);
+		writel(readl(FLCMDCR(flctl)) | 1, FLCMDCR(flctl));
+		writel(page_addr << 2 | sector, FLADR(flctl));
+
+		start_translation(flctl);
+		write_fiforeg(flctl, 512, 512 * sector);
+
+		for (i = 0; i < 4; i++) {
+			wait_wecfifo_ready(flctl); /* wait for write ready */
+			writel(0xFFFFFFFF, FLECFIFO(flctl));
+		}
+		wait_completion(flctl);
+	}
+
+	writel(readl(FLCMNCR(flctl)) & ~ACM_SACCES_MODE, FLCMNCR(flctl));
+}
+
+static void execmd_write_oob(struct mtd_info *mtd)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	int page_addr = flctl->seqin_page_addr;
+	int sector, page_sectors;
+
+	if (flctl->page_size) {
+		sector = 3;
+		page_sectors = 4;
+	} else {
+		sector = 0;
+		page_sectors = 1;
+	}
+
+	set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
+			(NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
+
+	for (; sector < page_sectors; sector++) {
+		empty_fifo(flctl);
+		set_addr(mtd, sector * 528 + 512, page_addr);
+		writel(16, FLDTCNTR(flctl));	/* set read size */
+
+		start_translation(flctl);
+		write_fiforeg(flctl, 16, 16 * sector);
+		wait_completion(flctl);
+	}
+}
+
+static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command,
+			int column, int page_addr)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	uint32_t read_cmd = 0;
+
+	flctl->read_bytes = 0;
+	if (command != NAND_CMD_PAGEPROG)
+		flctl->index = 0;
+
+	switch (command) {
+	case NAND_CMD_READ1:
+	case NAND_CMD_READ0:
+		if (flctl->hwecc) {
+			/* read page with hwecc */
+			execmd_read_page_sector(mtd, page_addr);
+			break;
+		}
+		empty_fifo(flctl);
+		if (flctl->page_size)
+			set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8)
+				| command);
+		else
+			set_cmd_regs(mtd, command, command);
+
+		set_addr(mtd, 0, page_addr);
+
+		flctl->read_bytes = mtd->writesize + mtd->oobsize;
+		flctl->index += column;
+		goto read_normal_exit;
+
+	case NAND_CMD_READOOB:
+		if (flctl->hwecc) {
+			/* read page with hwecc */
+			execmd_read_oob(mtd, page_addr);
+			break;
+		}
+
+		empty_fifo(flctl);
+		if (flctl->page_size) {
+			set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8)
+				| NAND_CMD_READ0);
+			set_addr(mtd, mtd->writesize, page_addr);
+		} else {
+			set_cmd_regs(mtd, command, command);
+			set_addr(mtd, 0, page_addr);
+		}
+		flctl->read_bytes = mtd->oobsize;
+		goto read_normal_exit;
+
+	case NAND_CMD_READID:
+		empty_fifo(flctl);
+		set_cmd_regs(mtd, command, command);
+		set_addr(mtd, 0, 0);
+
+		flctl->read_bytes = 4;
+		writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
+		start_translation(flctl);
+		read_datareg(flctl, 0);	/* read and end */
+		break;
+
+	case NAND_CMD_ERASE1:
+		flctl->erase1_page_addr = page_addr;
+		break;
+
+	case NAND_CMD_ERASE2:
+		set_cmd_regs(mtd, NAND_CMD_ERASE1,
+			(command << 8) | NAND_CMD_ERASE1);
+		set_addr(mtd, -1, flctl->erase1_page_addr);
+		start_translation(flctl);
+		wait_completion(flctl);
+		break;
+
+	case NAND_CMD_SEQIN:
+		if (!flctl->page_size) {
+			/* output read command */
+			if (column >= mtd->writesize) {
+				column -= mtd->writesize;
+				read_cmd = NAND_CMD_READOOB;
+			} else if (column < 256) {
+				read_cmd = NAND_CMD_READ0;
+			} else {
+				column -= 256;
+				read_cmd = NAND_CMD_READ1;
+			}
+		}
+		flctl->seqin_column = column;
+		flctl->seqin_page_addr = page_addr;
+		flctl->seqin_read_cmd = read_cmd;
+		break;
+
+	case NAND_CMD_PAGEPROG:
+		empty_fifo(flctl);
+		if (!flctl->page_size) {
+			set_cmd_regs(mtd, NAND_CMD_SEQIN,
+					flctl->seqin_read_cmd);
+			set_addr(mtd, -1, -1);
+			writel(0, FLDTCNTR(flctl));	/* set 0 size */
+			start_translation(flctl);
+			wait_completion(flctl);
+		}
+		if (flctl->hwecc) {
+			/* write page with hwecc */
+			if (flctl->seqin_column == mtd->writesize)
+				execmd_write_oob(mtd);
+			else if (!flctl->seqin_column)
+				execmd_write_page_sector(mtd);
+			else
+				printk(KERN_ERR "Invalid address !?\n");
+			break;
+		}
+		set_cmd_regs(mtd, command, (command << 8) | NAND_CMD_SEQIN);
+		set_addr(mtd, flctl->seqin_column, flctl->seqin_page_addr);
+		writel(flctl->index, FLDTCNTR(flctl));	/* set write size */
+		start_translation(flctl);
+		write_fiforeg(flctl, flctl->index, 0);
+		wait_completion(flctl);
+		break;
+
+	case NAND_CMD_STATUS:
+		set_cmd_regs(mtd, command, command);
+		set_addr(mtd, -1, -1);
+
+		flctl->read_bytes = 1;
+		writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
+		start_translation(flctl);
+		read_datareg(flctl, 0); /* read and end */
+		break;
+
+	case NAND_CMD_RESET:
+		set_cmd_regs(mtd, command, command);
+		set_addr(mtd, -1, -1);
+
+		writel(0, FLDTCNTR(flctl));	/* set 0 size */
+		start_translation(flctl);
+		wait_completion(flctl);
+		break;
+
+	default:
+		break;
+	}
+	return;
+
+read_normal_exit:
+	writel(flctl->read_bytes, FLDTCNTR(flctl));	/* set read size */
+	start_translation(flctl);
+	read_fiforeg(flctl, flctl->read_bytes, 0);
+	wait_completion(flctl);
+	return;
+}
+
+static void flctl_select_chip(struct mtd_info *mtd, int chipnr)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	uint32_t flcmncr_val = readl(FLCMNCR(flctl));
+
+	switch (chipnr) {
+	case -1:
+		flcmncr_val &= ~CE0_ENABLE;
+		writel(flcmncr_val, FLCMNCR(flctl));
+		break;
+	case 0:
+		flcmncr_val |= CE0_ENABLE;
+		writel(flcmncr_val, FLCMNCR(flctl));
+		break;
+	default:
+		BUG();
+	}
+}
+
+static void flctl_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	int i, index = flctl->index;
+
+	for (i = 0; i < len; i++)
+		flctl->done_buff[index + i] = buf[i];
+	flctl->index += len;
+}
+
+static uint8_t flctl_read_byte(struct mtd_info *mtd)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	int index = flctl->index;
+	uint8_t data;
+
+	data = flctl->done_buff[index];
+	flctl->index++;
+	return data;
+}
+
+static void flctl_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		buf[i] = flctl_read_byte(mtd);
+}
+
+static int flctl_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		if (buf[i] != flctl_read_byte(mtd))
+			return -EFAULT;
+	return 0;
+}
+
+static void flctl_register_init(struct sh_flctl *flctl, unsigned long val)
+{
+	writel(val, FLCMNCR(flctl));
+}
+
+static int flctl_chip_init_tail(struct mtd_info *mtd)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	struct nand_chip *chip = &flctl->chip;
+
+	if (mtd->writesize == 512) {
+		flctl->page_size = 0;
+		if (chip->chipsize > (32 << 20)) {
+			/* big than 32MB */
+			flctl->rw_ADRCNT = ADRCNT_4;
+			flctl->erase_ADRCNT = ADRCNT_3;
+		} else if (chip->chipsize > (2 << 16)) {
+			/* big than 128KB */
+			flctl->rw_ADRCNT = ADRCNT_3;
+			flctl->erase_ADRCNT = ADRCNT_2;
+		} else {
+			flctl->rw_ADRCNT = ADRCNT_2;
+			flctl->erase_ADRCNT = ADRCNT_1;
+		}
+	} else {
+		flctl->page_size = 1;
+		if (chip->chipsize > (128 << 20)) {
+			/* big than 128MB */
+			flctl->rw_ADRCNT = ADRCNT2_E;
+			flctl->erase_ADRCNT = ADRCNT_3;
+		} else if (chip->chipsize > (8 << 16)) {
+			/* big than 512KB */
+			flctl->rw_ADRCNT = ADRCNT_4;
+			flctl->erase_ADRCNT = ADRCNT_2;
+		} else {
+			flctl->rw_ADRCNT = ADRCNT_3;
+			flctl->erase_ADRCNT = ADRCNT_1;
+		}
+	}
+
+	if (flctl->hwecc) {
+		if (mtd->writesize == 512) {
+			chip->ecc.layout = &flctl_4secc_oob_16;
+			chip->badblock_pattern = &flctl_4secc_smallpage;
+		} else {
+			chip->ecc.layout = &flctl_4secc_oob_64;
+			chip->badblock_pattern = &flctl_4secc_largepage;
+		}
+
+		chip->ecc.size = 512;
+		chip->ecc.bytes = 10;
+		chip->ecc.read_page = flctl_read_page_hwecc;
+		chip->ecc.write_page = flctl_write_page_hwecc;
+		chip->ecc.mode = NAND_ECC_HW;
+
+		/* 4 symbols ECC enabled */
+		writel(readl(FLCMNCR(flctl)) | _4ECCEN | ECCPOS2 | ECCPOS_02,
+				FLCMNCR(flctl));
+	} else {
+		chip->ecc.mode = NAND_ECC_SOFT;
+	}
+
+	return 0;
+}
+
+static int __init flctl_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct sh_flctl *flctl;
+	struct mtd_info *flctl_mtd;
+	struct nand_chip *nand;
+	struct sh_flctl_platform_data *pdata;
+	int ret;
+
+	pdata = pdev->dev.platform_data;
+	if (pdata == NULL) {
+		printk(KERN_ERR "sh_flctl platform_data not found.\n");
+		return -ENODEV;
+	}
+
+	flctl = kzalloc(sizeof(struct sh_flctl), GFP_KERNEL);
+	if (!flctl) {
+		printk(KERN_ERR "Unable to allocate NAND MTD dev structure.\n");
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		printk(KERN_ERR "%s: resource not found.\n", __func__);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	flctl->reg = ioremap(res->start, res->end - res->start + 1);
+	if (flctl->reg == NULL) {
+		printk(KERN_ERR "%s: ioremap error.\n", __func__);
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, flctl);
+	flctl_mtd = &flctl->mtd;
+	nand = &flctl->chip;
+	flctl_mtd->priv = nand;
+	flctl->hwecc = pdata->has_hwecc;
+
+	flctl_register_init(flctl, pdata->flcmncr_val);
+
+	nand->options = NAND_NO_AUTOINCR;
+
+	/* Set address of hardware control function */
+	/* 20 us command delay time */
+	nand->chip_delay = 20;
+
+	nand->read_byte = flctl_read_byte;
+	nand->write_buf = flctl_write_buf;
+	nand->read_buf = flctl_read_buf;
+	nand->verify_buf = flctl_verify_buf;
+	nand->select_chip = flctl_select_chip;
+	nand->cmdfunc = flctl_cmdfunc;
+
+	ret = nand_scan_ident(flctl_mtd, 1);
+	if (ret)
+		goto err;
+
+	ret = flctl_chip_init_tail(flctl_mtd);
+	if (ret)
+		goto err;
+
+	ret = nand_scan_tail(flctl_mtd);
+	if (ret)
+		goto err;
+
+	add_mtd_partitions(flctl_mtd, pdata->parts, pdata->nr_parts);
+
+	return 0;
+
+err:
+	kfree(flctl);
+	return ret;
+}
+
+static int __exit flctl_remove(struct platform_device *pdev)
+{
+	struct sh_flctl *flctl = platform_get_drvdata(pdev);
+
+	nand_release(&flctl->mtd);
+	kfree(flctl);
+
+	return 0;
+}
+
+static struct platform_driver flctl_driver = {
+	.probe		= flctl_probe,
+	.remove		= flctl_remove,
+	.driver = {
+		.name	= "sh_flctl",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init flctl_nand_init(void)
+{
+	return platform_driver_register(&flctl_driver);
+}
+
+static void __exit flctl_nand_cleanup(void)
+{
+	platform_driver_unregister(&flctl_driver);
+}
+
+module_init(flctl_nand_init);
+module_exit(flctl_nand_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Yoshihiro Shimoda");
+MODULE_DESCRIPTION("SuperH FLCTL driver");
+MODULE_ALIAS("platform:sh_flctl");
diff --git a/drivers/mtd/nand/toto.c b/drivers/mtd/nand/toto.c
deleted file mode 100644
index bbf492e6830d..000000000000
--- a/drivers/mtd/nand/toto.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- *  drivers/mtd/nand/toto.c
- *
- *  Copyright (c) 2003 Texas Instruments
- *
- *  Derived from drivers/mtd/autcpu12.c
- *
- *  Copyright (c) 2002 Thomas Gleixner <tgxl@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Overview:
- *   This is a device driver for the NAND flash device found on the
- *   TI fido board. It supports 32MiB and 64MiB cards
- */
-
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/sizes.h>
-#include <asm/arch/toto.h>
-#include <asm/arch-omap1510/hardware.h>
-#include <asm/arch/gpio.h>
-
-#define CONFIG_NAND_WORKAROUND 1
-
-/*
- * MTD structure for TOTO board
- */
-static struct mtd_info *toto_mtd = NULL;
-
-static unsigned long toto_io_base = OMAP_FLASH_1_BASE;
-
-/*
- * Define partitions for flash devices
- */
-
-static struct mtd_partition partition_info64M[] = {
-	{ .name =	"toto kernel partition 1",
-	  .offset =	0,
-	  .size	=	2 * SZ_1M },
-	{ .name =	"toto file sys partition 2",
-	  .offset =	2 * SZ_1M,
-	  .size =	14 * SZ_1M },
-	{ .name =	"toto user partition 3",
-	  .offset =	16 * SZ_1M,
-	  .size =	16 * SZ_1M },
-	{ .name =	"toto devboard extra partition 4",
-	  .offset =	32 * SZ_1M,
-	  .size =	32 * SZ_1M },
-};
-
-static struct mtd_partition partition_info32M[] = {
-	{ .name =	"toto kernel partition 1",
-	  .offset =	0,
-	  .size =	2 * SZ_1M },
-	{ .name =	"toto file sys partition 2",
-	  .offset =	2 * SZ_1M,
-	  .size =	14 * SZ_1M },
-	{ .name =	"toto user partition 3",
-	  .offset =	16 * SZ_1M,
-	  .size =	16 * SZ_1M },
-};
-
-#define NUM_PARTITIONS32M 3
-#define NUM_PARTITIONS64M 4
-
-/*
- *	hardware specific access to control-lines
- *
- *	ctrl:
- *	NAND_NCE: bit 0 -> bit 14 (0x4000)
- *	NAND_CLE: bit 1 -> bit 12 (0x1000)
- *	NAND_ALE: bit 2 -> bit 1  (0x0002)
- */
-static void toto_hwcontrol(struct mtd_info *mtd, int cmd,
-			   unsigned int ctrl)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		unsigned long bits;
-
-		/* hopefully enough time for tc make proceding write to clear */
-		udelay(1);
-
-		bits = (~ctrl & NAND_NCE) << 14;
-		bits |= (ctrl & NAND_CLE) << 12;
-		bits |= (ctrl & NAND_ALE) >> 1;
-
-#warning Wild guess as gpiosetout() is nowhere defined in the kernel source - tglx
-		gpiosetout(0x5002, bits);
-
-#ifdef CONFIG_NAND_WORKAROUND
-		/* "some" dev boards busted, blue wired to rts2 :( */
-		rts2setout(2, (ctrl & NAND_CLE) << 1);
-#endif
-		/* allow time to ensure gpio state to over take memory write */
-		udelay(1);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, chip->IO_ADDR_W);
-}
-
-/*
- * Main initialization routine
- */
-static int __init toto_init(void)
-{
-	struct nand_chip *this;
-	int err = 0;
-
-	/* Allocate memory for MTD device structure and private data */
-	toto_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
-	if (!toto_mtd) {
-		printk(KERN_WARNING "Unable to allocate toto NAND MTD device structure.\n");
-		err = -ENOMEM;
-		goto out;
-	}
-
-	/* Get pointer to private data */
-	this = (struct nand_chip *)(&toto_mtd[1]);
-
-	/* Initialize structures */
-	memset(toto_mtd, 0, sizeof(struct mtd_info));
-	memset(this, 0, sizeof(struct nand_chip));
-
-	/* Link the private data with the MTD structure */
-	toto_mtd->priv = this;
-	toto_mtd->owner = THIS_MODULE;
-
-	/* Set address of NAND IO lines */
-	this->IO_ADDR_R = toto_io_base;
-	this->IO_ADDR_W = toto_io_base;
-	this->cmd_ctrl = toto_hwcontrol;
-	this->dev_ready = NULL;
-	/* 25 us command delay time */
-	this->chip_delay = 30;
-	this->ecc.mode = NAND_ECC_SOFT;
-
-	/* Scan to find existance of the device */
-	if (nand_scan(toto_mtd, 1)) {
-		err = -ENXIO;
-		goto out_mtd;
-	}
-
-	/* Register the partitions */
-	switch (toto_mtd->size) {
-	case SZ_64M:
-		add_mtd_partitions(toto_mtd, partition_info64M, NUM_PARTITIONS64M);
-		break;
-	case SZ_32M:
-		add_mtd_partitions(toto_mtd, partition_info32M, NUM_PARTITIONS32M);
-		break;
-	default:{
-			printk(KERN_WARNING "Unsupported Nand device\n");
-			err = -ENXIO;
-			goto out_buf;
-		}
-	}
-
-	gpioreserve(NAND_MASK);	/* claim our gpios */
-	archflashwp(0, 0);	/* open up flash for writing */
-
-	goto out;
-
- out_mtd:
-	kfree(toto_mtd);
- out:
-	return err;
-}
-
-module_init(toto_init);
-
-/*
- * Clean up routine
- */
-static void __exit toto_cleanup(void)
-{
-	/* Release resources, unregister device */
-	nand_release(toto_mtd);
-
-	/* Free the MTD device structure */
-	kfree(toto_mtd);
-
-	/* stop flash writes */
-	archflashwp(0, 1);
-
-	/* release gpios to system */
-	gpiorelease(NAND_MASK);
-}
-
-module_exit(toto_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Richard Woodruff <r-woodruff2@ti.com>");
-MODULE_DESCRIPTION("Glue layer for NAND flash on toto board");
diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c
index 4f80c2fd89af..9e45b3f39c0e 100644
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -20,7 +20,6 @@
 #include <linux/mtd/partitions.h>
 
 int __devinit of_mtd_parse_partitions(struct device *dev,
-                                      struct mtd_info *mtd,
                                       struct device_node *node,
                                       struct mtd_partition **pparts)
 {
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index cb41cbca64f7..79fa79e8f8de 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -27,8 +27,16 @@ config MTD_ONENAND_GENERIC
 	help
 	  Support for OneNAND flash via platform device driver.
 
+config MTD_ONENAND_OMAP2
+	tristate "OneNAND on OMAP2/OMAP3 support"
+	depends on MTD_ONENAND && (ARCH_OMAP2 || ARCH_OMAP3)
+	help
+	  Support for a OneNAND flash device connected to an OMAP2/OMAP3 CPU
+	  via the GPMC memory controller.
+
 config MTD_ONENAND_OTP
 	bool "OneNAND OTP Support"
+	select HAVE_MTD_OTP
 	help
 	  One Block of the NAND Flash Array memory is reserved as
 	  a One-Time Programmable Block memory area.
diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile
index 4d2eacfd7e11..64b6cc61a520 100644
--- a/drivers/mtd/onenand/Makefile
+++ b/drivers/mtd/onenand/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_MTD_ONENAND)		+= onenand.o
 
 # Board specific.
 obj-$(CONFIG_MTD_ONENAND_GENERIC)	+= generic.o
+obj-$(CONFIG_MTD_ONENAND_OMAP2)		+= omap2.o
 
 # Simulator
 obj-$(CONFIG_MTD_ONENAND_SIM)		+= onenand_sim.o
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
new file mode 100644
index 000000000000..8387e05daae2
--- /dev/null
+++ b/drivers/mtd/onenand/omap2.c
@@ -0,0 +1,802 @@
+/*
+ *  linux/drivers/mtd/onenand/omap2.c
+ *
+ *  OneNAND driver for OMAP2 / OMAP3
+ *
+ *  Copyright © 2005-2006 Nokia Corporation
+ *
+ *  Author: Jarkko Lavinen <jarkko.lavinen@nokia.com> and Juha Yrjölä
+ *  IRQ and DMA support written by Timo Teras
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; see the file COPYING. If not, write to the Free Software
+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/mach/flash.h>
+#include <asm/arch/gpmc.h>
+#include <asm/arch/onenand.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/gpmc.h>
+#include <asm/arch/pm.h>
+
+#include <linux/dma-mapping.h>
+#include <asm/dma-mapping.h>
+#include <asm/arch/dma.h>
+
+#include <asm/arch/board.h>
+
+#define DRIVER_NAME "omap2-onenand"
+
+#define ONENAND_IO_SIZE		SZ_128K
+#define ONENAND_BUFRAM_SIZE	(1024 * 5)
+
+struct omap2_onenand {
+	struct platform_device *pdev;
+	int gpmc_cs;
+	unsigned long phys_base;
+	int gpio_irq;
+	struct mtd_info mtd;
+	struct mtd_partition *parts;
+	struct onenand_chip onenand;
+	struct completion irq_done;
+	struct completion dma_done;
+	int dma_channel;
+	int freq;
+	int (*setup)(void __iomem *base, int freq);
+};
+
+static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
+{
+	struct omap2_onenand *c = data;
+
+	complete(&c->dma_done);
+}
+
+static irqreturn_t omap2_onenand_interrupt(int irq, void *dev_id)
+{
+	struct omap2_onenand *c = dev_id;
+
+	complete(&c->irq_done);
+
+	return IRQ_HANDLED;
+}
+
+static inline unsigned short read_reg(struct omap2_onenand *c, int reg)
+{
+	return readw(c->onenand.base + reg);
+}
+
+static inline void write_reg(struct omap2_onenand *c, unsigned short value,
+			     int reg)
+{
+	writew(value, c->onenand.base + reg);
+}
+
+static void wait_err(char *msg, int state, unsigned int ctrl, unsigned int intr)
+{
+	printk(KERN_ERR "onenand_wait: %s! state %d ctrl 0x%04x intr 0x%04x\n",
+	       msg, state, ctrl, intr);
+}
+
+static void wait_warn(char *msg, int state, unsigned int ctrl,
+		      unsigned int intr)
+{
+	printk(KERN_WARNING "onenand_wait: %s! state %d ctrl 0x%04x "
+	       "intr 0x%04x\n", msg, state, ctrl, intr);
+}
+
+static int omap2_onenand_wait(struct mtd_info *mtd, int state)
+{
+	struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
+	unsigned int intr = 0;
+	unsigned int ctrl;
+	unsigned long timeout;
+	u32 syscfg;
+
+	if (state == FL_RESETING) {
+		int i;
+
+		for (i = 0; i < 20; i++) {
+			udelay(1);
+			intr = read_reg(c, ONENAND_REG_INTERRUPT);
+			if (intr & ONENAND_INT_MASTER)
+				break;
+		}
+		ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
+		if (ctrl & ONENAND_CTRL_ERROR) {
+			wait_err("controller error", state, ctrl, intr);
+			return -EIO;
+		}
+		if (!(intr & ONENAND_INT_RESET)) {
+			wait_err("timeout", state, ctrl, intr);
+			return -EIO;
+		}
+		return 0;
+	}
+
+	if (state != FL_READING) {
+		int result;
+
+		/* Turn interrupts on */
+		syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
+		if (!(syscfg & ONENAND_SYS_CFG1_IOBE)) {
+			syscfg |= ONENAND_SYS_CFG1_IOBE;
+			write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
+			if (cpu_is_omap34xx())
+				/* Add a delay to let GPIO settle */
+				syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
+		}
+
+		INIT_COMPLETION(c->irq_done);
+		if (c->gpio_irq) {
+			result = omap_get_gpio_datain(c->gpio_irq);
+			if (result == -1) {
+				ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
+				intr = read_reg(c, ONENAND_REG_INTERRUPT);
+				wait_err("gpio error", state, ctrl, intr);
+				return -EIO;
+			}
+		} else
+			result = 0;
+		if (result == 0) {
+			int retry_cnt = 0;
+retry:
+			result = wait_for_completion_timeout(&c->irq_done,
+						    msecs_to_jiffies(20));
+			if (result == 0) {
+				/* Timeout after 20ms */
+				ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
+				if (ctrl & ONENAND_CTRL_ONGO) {
+					/*
+					 * The operation seems to be still going
+					 * so give it some more time.
+					 */
+					retry_cnt += 1;
+					if (retry_cnt < 3)
+						goto retry;
+					intr = read_reg(c,
+							ONENAND_REG_INTERRUPT);
+					wait_err("timeout", state, ctrl, intr);
+					return -EIO;
+				}
+				intr = read_reg(c, ONENAND_REG_INTERRUPT);
+				if ((intr & ONENAND_INT_MASTER) == 0)
+					wait_warn("timeout", state, ctrl, intr);
+			}
+		}
+	} else {
+		int retry_cnt = 0;
+
+		/* Turn interrupts off */
+		syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
+		syscfg &= ~ONENAND_SYS_CFG1_IOBE;
+		write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
+
+		timeout = jiffies + msecs_to_jiffies(20);
+		while (1) {
+			if (time_before(jiffies, timeout)) {
+				intr = read_reg(c, ONENAND_REG_INTERRUPT);
+				if (intr & ONENAND_INT_MASTER)
+					break;
+			} else {
+				/* Timeout after 20ms */
+				ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
+				if (ctrl & ONENAND_CTRL_ONGO) {
+					/*
+					 * The operation seems to be still going
+					 * so give it some more time.
+					 */
+					retry_cnt += 1;
+					if (retry_cnt < 3) {
+						timeout = jiffies +
+							  msecs_to_jiffies(20);
+						continue;
+					}
+				}
+				break;
+			}
+		}
+	}
+
+	intr = read_reg(c, ONENAND_REG_INTERRUPT);
+	ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
+
+	if (intr & ONENAND_INT_READ) {
+		int ecc = read_reg(c, ONENAND_REG_ECC_STATUS);
+
+		if (ecc) {
+			unsigned int addr1, addr8;
+
+			addr1 = read_reg(c, ONENAND_REG_START_ADDRESS1);
+			addr8 = read_reg(c, ONENAND_REG_START_ADDRESS8);
+			if (ecc & ONENAND_ECC_2BIT_ALL) {
+				printk(KERN_ERR "onenand_wait: ECC error = "
+				       "0x%04x, addr1 %#x, addr8 %#x\n",
+				       ecc, addr1, addr8);
+				mtd->ecc_stats.failed++;
+				return -EBADMSG;
+			} else if (ecc & ONENAND_ECC_1BIT_ALL) {
+				printk(KERN_NOTICE "onenand_wait: correctable "
+				       "ECC error = 0x%04x, addr1 %#x, "
+				       "addr8 %#x\n", ecc, addr1, addr8);
+				mtd->ecc_stats.corrected++;
+			}
+		}
+	} else if (state == FL_READING) {
+		wait_err("timeout", state, ctrl, intr);
+		return -EIO;
+	}
+
+	if (ctrl & ONENAND_CTRL_ERROR) {
+		wait_err("controller error", state, ctrl, intr);
+		if (ctrl & ONENAND_CTRL_LOCK)
+			printk(KERN_ERR "onenand_wait: "
+					"Device is write protected!!!\n");
+		return -EIO;
+	}
+
+	if (ctrl & 0xFE9F)
+		wait_warn("unexpected controller status", state, ctrl, intr);
+
+	return 0;
+}
+
+static inline int omap2_onenand_bufferram_offset(struct mtd_info *mtd, int area)
+{
+	struct onenand_chip *this = mtd->priv;
+
+	if (ONENAND_CURRENT_BUFFERRAM(this)) {
+		if (area == ONENAND_DATARAM)
+			return mtd->writesize;
+		if (area == ONENAND_SPARERAM)
+			return mtd->oobsize;
+	}
+
+	return 0;
+}
+
+#if defined(CONFIG_ARCH_OMAP3) || defined(MULTI_OMAP2)
+
+static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
+					unsigned char *buffer, int offset,
+					size_t count)
+{
+	struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
+	struct onenand_chip *this = mtd->priv;
+	dma_addr_t dma_src, dma_dst;
+	int bram_offset;
+	unsigned long timeout;
+	void *buf = (void *)buffer;
+	size_t xtra;
+	volatile unsigned *done;
+
+	bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
+	if (bram_offset & 3 || (size_t)buf & 3 || count < 384)
+		goto out_copy;
+
+	if (buf >= high_memory) {
+		struct page *p1;
+
+		if (((size_t)buf & PAGE_MASK) !=
+		    ((size_t)(buf + count - 1) & PAGE_MASK))
+			goto out_copy;
+		p1 = vmalloc_to_page(buf);
+		if (!p1)
+			goto out_copy;
+		buf = page_address(p1) + ((size_t)buf & ~PAGE_MASK);
+	}
+
+	xtra = count & 3;
+	if (xtra) {
+		count -= xtra;
+		memcpy(buf + count, this->base + bram_offset + count, xtra);
+	}
+
+	dma_src = c->phys_base + bram_offset;
+	dma_dst = dma_map_single(&c->pdev->dev, buf, count, DMA_FROM_DEVICE);
+	if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
+		dev_err(&c->pdev->dev,
+			"Couldn't DMA map a %d byte buffer\n",
+			count);
+		goto out_copy;
+	}
+
+	omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
+				     count >> 2, 1, 0, 0, 0);
+	omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+				dma_src, 0, 0);
+	omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+				 dma_dst, 0, 0);
+
+	INIT_COMPLETION(c->dma_done);
+	omap_start_dma(c->dma_channel);
+
+	timeout = jiffies + msecs_to_jiffies(20);
+	done = &c->dma_done.done;
+	while (time_before(jiffies, timeout))
+		if (*done)
+			break;
+
+	dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE);
+
+	if (!*done) {
+		dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
+		goto out_copy;
+	}
+
+	return 0;
+
+out_copy:
+	memcpy(buf, this->base + bram_offset, count);
+	return 0;
+}
+
+static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
+					 const unsigned char *buffer,
+					 int offset, size_t count)
+{
+	struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
+	struct onenand_chip *this = mtd->priv;
+	dma_addr_t dma_src, dma_dst;
+	int bram_offset;
+	unsigned long timeout;
+	void *buf = (void *)buffer;
+	volatile unsigned *done;
+
+	bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
+	if (bram_offset & 3 || (size_t)buf & 3 || count < 384)
+		goto out_copy;
+
+	/* panic_write() may be in an interrupt context */
+	if (in_interrupt())
+		goto out_copy;
+
+	if (buf >= high_memory) {
+		struct page *p1;
+
+		if (((size_t)buf & PAGE_MASK) !=
+		    ((size_t)(buf + count - 1) & PAGE_MASK))
+			goto out_copy;
+		p1 = vmalloc_to_page(buf);
+		if (!p1)
+			goto out_copy;
+		buf = page_address(p1) + ((size_t)buf & ~PAGE_MASK);
+	}
+
+	dma_src = dma_map_single(&c->pdev->dev, buf, count, DMA_TO_DEVICE);
+	dma_dst = c->phys_base + bram_offset;
+	if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
+		dev_err(&c->pdev->dev,
+			"Couldn't DMA map a %d byte buffer\n",
+			count);
+		return -1;
+	}
+
+	omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
+				     count >> 2, 1, 0, 0, 0);
+	omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+				dma_src, 0, 0);
+	omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+				 dma_dst, 0, 0);
+
+	INIT_COMPLETION(c->dma_done);
+	omap_start_dma(c->dma_channel);
+
+	timeout = jiffies + msecs_to_jiffies(20);
+	done = &c->dma_done.done;
+	while (time_before(jiffies, timeout))
+		if (*done)
+			break;
+
+	dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_TO_DEVICE);
+
+	if (!*done) {
+		dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
+		goto out_copy;
+	}
+
+	return 0;
+
+out_copy:
+	memcpy(this->base + bram_offset, buf, count);
+	return 0;
+}
+
+#else
+
+int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
+				 unsigned char *buffer, int offset,
+				 size_t count);
+
+int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
+				  const unsigned char *buffer,
+				  int offset, size_t count);
+
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(MULTI_OMAP2)
+
+static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
+					unsigned char *buffer, int offset,
+					size_t count)
+{
+	struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
+	struct onenand_chip *this = mtd->priv;
+	dma_addr_t dma_src, dma_dst;
+	int bram_offset;
+
+	bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
+	/* DMA is not used.  Revisit PM requirements before enabling it. */
+	if (1 || (c->dma_channel < 0) ||
+	    ((void *) buffer >= (void *) high_memory) || (bram_offset & 3) ||
+	    (((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) {
+		memcpy(buffer, (__force void *)(this->base + bram_offset),
+		       count);
+		return 0;
+	}
+
+	dma_src = c->phys_base + bram_offset;
+	dma_dst = dma_map_single(&c->pdev->dev, buffer, count,
+				 DMA_FROM_DEVICE);
+	if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
+		dev_err(&c->pdev->dev,
+			"Couldn't DMA map a %d byte buffer\n",
+			count);
+		return -1;
+	}
+
+	omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
+				     count / 4, 1, 0, 0, 0);
+	omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+				dma_src, 0, 0);
+	omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+				 dma_dst, 0, 0);
+
+	INIT_COMPLETION(c->dma_done);
+	omap_start_dma(c->dma_channel);
+	wait_for_completion(&c->dma_done);
+
+	dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE);
+
+	return 0;
+}
+
+static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
+					 const unsigned char *buffer,
+					 int offset, size_t count)
+{
+	struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
+	struct onenand_chip *this = mtd->priv;
+	dma_addr_t dma_src, dma_dst;
+	int bram_offset;
+
+	bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
+	/* DMA is not used.  Revisit PM requirements before enabling it. */
+	if (1 || (c->dma_channel < 0) ||
+	    ((void *) buffer >= (void *) high_memory) || (bram_offset & 3) ||
+	    (((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) {
+		memcpy((__force void *)(this->base + bram_offset), buffer,
+		       count);
+		return 0;
+	}
+
+	dma_src = dma_map_single(&c->pdev->dev, (void *) buffer, count,
+				 DMA_TO_DEVICE);
+	dma_dst = c->phys_base + bram_offset;
+	if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
+		dev_err(&c->pdev->dev,
+			"Couldn't DMA map a %d byte buffer\n",
+			count);
+		return -1;
+	}
+
+	omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S16,
+				     count / 2, 1, 0, 0, 0);
+	omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+				dma_src, 0, 0);
+	omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+				 dma_dst, 0, 0);
+
+	INIT_COMPLETION(c->dma_done);
+	omap_start_dma(c->dma_channel);
+	wait_for_completion(&c->dma_done);
+
+	dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_TO_DEVICE);
+
+	return 0;
+}
+
+#else
+
+int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
+				 unsigned char *buffer, int offset,
+				 size_t count);
+
+int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
+				  const unsigned char *buffer,
+				  int offset, size_t count);
+
+#endif
+
+static struct platform_driver omap2_onenand_driver;
+
+static int __adjust_timing(struct device *dev, void *data)
+{
+	int ret = 0;
+	struct omap2_onenand *c;
+
+	c = dev_get_drvdata(dev);
+
+	BUG_ON(c->setup == NULL);
+
+	/* DMA is not in use so this is all that is needed */
+	/* Revisit for OMAP3! */
+	ret = c->setup(c->onenand.base, c->freq);
+
+	return ret;
+}
+
+int omap2_onenand_rephase(void)
+{
+	return driver_for_each_device(&omap2_onenand_driver.driver, NULL,
+				      NULL, __adjust_timing);
+}
+
+static void __devexit omap2_onenand_shutdown(struct platform_device *pdev)
+{
+	struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
+
+	/* With certain content in the buffer RAM, the OMAP boot ROM code
+	 * can recognize the flash chip incorrectly. Zero it out before
+	 * soft reset.
+	 */
+	memset((__force void *)c->onenand.base, 0, ONENAND_BUFRAM_SIZE);
+}
+
+static int __devinit omap2_onenand_probe(struct platform_device *pdev)
+{
+	struct omap_onenand_platform_data *pdata;
+	struct omap2_onenand *c;
+	int r;
+
+	pdata = pdev->dev.platform_data;
+	if (pdata == NULL) {
+		dev_err(&pdev->dev, "platform data missing\n");
+		return -ENODEV;
+	}
+
+	c = kzalloc(sizeof(struct omap2_onenand), GFP_KERNEL);
+	if (!c)
+		return -ENOMEM;
+
+	init_completion(&c->irq_done);
+	init_completion(&c->dma_done);
+	c->gpmc_cs = pdata->cs;
+	c->gpio_irq = pdata->gpio_irq;
+	c->dma_channel = pdata->dma_channel;
+	if (c->dma_channel < 0) {
+		/* if -1, don't use DMA */
+		c->gpio_irq = 0;
+	}
+
+	r = gpmc_cs_request(c->gpmc_cs, ONENAND_IO_SIZE, &c->phys_base);
+	if (r < 0) {
+		dev_err(&pdev->dev, "Cannot request GPMC CS\n");
+		goto err_kfree;
+	}
+
+	if (request_mem_region(c->phys_base, ONENAND_IO_SIZE,
+			       pdev->dev.driver->name) == NULL) {
+		dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, "
+			"size: 0x%x\n",	c->phys_base, ONENAND_IO_SIZE);
+		r = -EBUSY;
+		goto err_free_cs;
+	}
+	c->onenand.base = ioremap(c->phys_base, ONENAND_IO_SIZE);
+	if (c->onenand.base == NULL) {
+		r = -ENOMEM;
+		goto err_release_mem_region;
+	}
+
+	if (pdata->onenand_setup != NULL) {
+		r = pdata->onenand_setup(c->onenand.base, c->freq);
+		if (r < 0) {
+			dev_err(&pdev->dev, "Onenand platform setup failed: "
+				"%d\n", r);
+			goto err_iounmap;
+		}
+		c->setup = pdata->onenand_setup;
+	}
+
+	if (c->gpio_irq) {
+		if ((r = omap_request_gpio(c->gpio_irq)) < 0) {
+			dev_err(&pdev->dev,  "Failed to request GPIO%d for "
+				"OneNAND\n", c->gpio_irq);
+			goto err_iounmap;
+	}
+	omap_set_gpio_direction(c->gpio_irq, 1);
+
+	if ((r = request_irq(OMAP_GPIO_IRQ(c->gpio_irq),
+			     omap2_onenand_interrupt, IRQF_TRIGGER_RISING,
+			     pdev->dev.driver->name, c)) < 0)
+		goto err_release_gpio;
+	}
+
+	if (c->dma_channel >= 0) {
+		r = omap_request_dma(0, pdev->dev.driver->name,
+				     omap2_onenand_dma_cb, (void *) c,
+				     &c->dma_channel);
+		if (r == 0) {
+			omap_set_dma_write_mode(c->dma_channel,
+						OMAP_DMA_WRITE_NON_POSTED);
+			omap_set_dma_src_data_pack(c->dma_channel, 1);
+			omap_set_dma_src_burst_mode(c->dma_channel,
+						    OMAP_DMA_DATA_BURST_8);
+			omap_set_dma_dest_data_pack(c->dma_channel, 1);
+			omap_set_dma_dest_burst_mode(c->dma_channel,
+						     OMAP_DMA_DATA_BURST_8);
+		} else {
+			dev_info(&pdev->dev,
+				 "failed to allocate DMA for OneNAND, "
+				 "using PIO instead\n");
+			c->dma_channel = -1;
+		}
+	}
+
+	dev_info(&pdev->dev, "initializing on CS%d, phys base 0x%08lx, virtual "
+		 "base %p\n", c->gpmc_cs, c->phys_base,
+		 c->onenand.base);
+
+	c->pdev = pdev;
+	c->mtd.name = pdev->dev.bus_id;
+	c->mtd.priv = &c->onenand;
+	c->mtd.owner = THIS_MODULE;
+
+	if (c->dma_channel >= 0) {
+		struct onenand_chip *this = &c->onenand;
+
+		this->wait = omap2_onenand_wait;
+		if (cpu_is_omap34xx()) {
+			this->read_bufferram = omap3_onenand_read_bufferram;
+			this->write_bufferram = omap3_onenand_write_bufferram;
+		} else {
+			this->read_bufferram = omap2_onenand_read_bufferram;
+			this->write_bufferram = omap2_onenand_write_bufferram;
+		}
+	}
+
+	if ((r = onenand_scan(&c->mtd, 1)) < 0)
+		goto err_release_dma;
+
+	switch ((c->onenand.version_id >> 4) & 0xf) {
+	case 0:
+		c->freq = 40;
+		break;
+	case 1:
+		c->freq = 54;
+		break;
+	case 2:
+		c->freq = 66;
+		break;
+	case 3:
+		c->freq = 83;
+		break;
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+	if (pdata->parts != NULL)
+		r = add_mtd_partitions(&c->mtd, pdata->parts,
+				       pdata->nr_parts);
+	else
+#endif
+		r = add_mtd_device(&c->mtd);
+	if (r < 0)
+		goto err_release_onenand;
+
+	platform_set_drvdata(pdev, c);
+
+	return 0;
+
+err_release_onenand:
+	onenand_release(&c->mtd);
+err_release_dma:
+	if (c->dma_channel != -1)
+		omap_free_dma(c->dma_channel);
+	if (c->gpio_irq)
+		free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c);
+err_release_gpio:
+	if (c->gpio_irq)
+		omap_free_gpio(c->gpio_irq);
+err_iounmap:
+	iounmap(c->onenand.base);
+err_release_mem_region:
+	release_mem_region(c->phys_base, ONENAND_IO_SIZE);
+err_free_cs:
+	gpmc_cs_free(c->gpmc_cs);
+err_kfree:
+	kfree(c);
+
+	return r;
+}
+
+static int __devexit omap2_onenand_remove(struct platform_device *pdev)
+{
+	struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
+
+	BUG_ON(c == NULL);
+
+#ifdef CONFIG_MTD_PARTITIONS
+	if (c->parts)
+		del_mtd_partitions(&c->mtd);
+	else
+		del_mtd_device(&c->mtd);
+#else
+	del_mtd_device(&c->mtd);
+#endif
+
+	onenand_release(&c->mtd);
+	if (c->dma_channel != -1)
+		omap_free_dma(c->dma_channel);
+	omap2_onenand_shutdown(pdev);
+	platform_set_drvdata(pdev, NULL);
+	if (c->gpio_irq) {
+		free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c);
+		omap_free_gpio(c->gpio_irq);
+	}
+	iounmap(c->onenand.base);
+	release_mem_region(c->phys_base, ONENAND_IO_SIZE);
+	kfree(c);
+
+	return 0;
+}
+
+static struct platform_driver omap2_onenand_driver = {
+	.probe		= omap2_onenand_probe,
+	.remove		= omap2_onenand_remove,
+	.shutdown	= omap2_onenand_shutdown,
+	.driver		= {
+		.name	= DRIVER_NAME,
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int __init omap2_onenand_init(void)
+{
+	printk(KERN_INFO "OneNAND driver initializing\n");
+	return platform_driver_register(&omap2_onenand_driver);
+}
+
+static void __exit omap2_onenand_exit(void)
+{
+	platform_driver_unregister(&omap2_onenand_driver);
+}
+
+module_init(omap2_onenand_init);
+module_exit(omap2_onenand_exit);
+
+MODULE_ALIAS(DRIVER_NAME);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarkko Lavinen <jarkko.lavinen@nokia.com>");
+MODULE_DESCRIPTION("Glue layer for OneNAND flash on OMAP2 / OMAP3");
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 926cf3a4135d..90ed319f26e6 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1794,7 +1794,7 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
 		return -EINVAL;
 	}
 
-	instr->fail_addr = 0xffffffff;
+	instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
 
 	/* Grab the lock and see if the device is available */
 	onenand_get_device(mtd, FL_ERASING);
diff --git a/drivers/mtd/ssfdc.c b/drivers/mtd/ssfdc.c
index a5f3d60047d4..33a5d6ed6f18 100644
--- a/drivers/mtd/ssfdc.c
+++ b/drivers/mtd/ssfdc.c
@@ -321,8 +321,7 @@ static void ssfdcr_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
 	DEBUG(MTD_DEBUG_LEVEL1,
 		"SSFDC_RO: cis_block=%d,erase_size=%d,map_len=%d,n_zones=%d\n",
 		ssfdc->cis_block, ssfdc->erase_size, ssfdc->map_len,
-		(ssfdc->map_len + MAX_PHYS_BLK_PER_ZONE - 1) /
-		MAX_PHYS_BLK_PER_ZONE);
+		DIV_ROUND_UP(ssfdc->map_len, MAX_PHYS_BLK_PER_ZONE));
 
 	/* Set geometry */
 	ssfdc->heads = 16;
diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index 03c759b4eeb5..b30a0b83d7f1 100644
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -104,12 +104,9 @@ static int vol_cdev_open(struct inode *inode, struct file *file)
 	struct ubi_volume_desc *desc;
 	int vol_id = iminor(inode) - 1, mode, ubi_num;
 
-	lock_kernel();
 	ubi_num = ubi_major2num(imajor(inode));
-	if (ubi_num < 0) {
-		unlock_kernel();
+	if (ubi_num < 0)
 		return ubi_num;
-	}
 
 	if (file->f_mode & FMODE_WRITE)
 		mode = UBI_READWRITE;
@@ -119,7 +116,6 @@ static int vol_cdev_open(struct inode *inode, struct file *file)
 	dbg_gen("open volume %d, mode %d", vol_id, mode);
 
 	desc = ubi_open_volume(ubi_num, vol_id, mode);
-	unlock_kernel();
 	if (IS_ERR(desc))
 		return PTR_ERR(desc);
 
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 967bb4406df9..4f2daa5bbecf 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -387,7 +387,7 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 		pnum, vol_id, lnum, ec, sqnum, bitflips);
 
 	sv = add_volume(si, vol_id, pnum, vid_hdr);
-	if (IS_ERR(sv) < 0)
+	if (IS_ERR(sv))
 		return PTR_ERR(sv);
 
 	if (si->max_sqnum < sqnum)
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 217d0e111b2a..333c8941552f 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -244,8 +244,8 @@ static int vtbl_check(const struct ubi_device *ubi,
 		}
 
 		if (reserved_pebs > ubi->good_peb_count) {
-			dbg_err("too large reserved_pebs, good PEBs %d",
-				ubi->good_peb_count);
+			dbg_err("too large reserved_pebs %d, good PEBs %d",
+				reserved_pebs, ubi->good_peb_count);
 			err = 9;
 			goto bad;
 		}
author	Linus Torvalds <torvalds@linux-foundation.org>	2008-10-20 20:03:12 +0400
committer	Linus Torvalds <torvalds@linux-foundation.org>	2008-10-20 20:03:12 +0400
commit	2be508d847392e431759e370d21cea9412848758 (patch)
tree	be5e00a4d7be4ef353ffe4d550fb80a251d321c3 /drivers/mtd
parent	01e8ef11bc1a74e65678ed55795f59266d4add01 (diff)
parent	8a1a6272057e2ad90ab531a70330165888866e60 (diff)
download	linux-2be508d847392e431759e370d21cea9412848758.tar.xz