[media] dvb-usb: move it to drivers/media/usb/dvb-usb

As media/dvb will be removed, move it to a proper place.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 356 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb-v2/anysee.h b/drivers/media/usb/dvb-usb-v2/anysee.h
new file mode 100644
index 000000000000..dc40dcf7c328
--- /dev/null
+++ b/drivers/media/usb/dvb-usb-v2/anysee.h
@@ -0,0 +1,356 @@
+/*
+ * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * TODO:
+ * - add smart card reader support for Conditional Access (CA)
+ *
+ * Card reader in Anysee is nothing more than ISO 7816 card reader.
+ * There is no hardware CAM in any Anysee device sold.
+ * In my understanding it should be implemented by making own module
+ * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This
+ * module registers serial interface that can be used to communicate
+ * with any ISO 7816 smart card.
+ *
+ * Any help according to implement serial smart card reader support
+ * is highly welcome!
+ */
+
+#ifndef _DVB_USB_ANYSEE_H_
+#define _DVB_USB_ANYSEE_H_
+
+#define DVB_USB_LOG_PREFIX "anysee"
+#include "dvb_usb.h"
+#include "dvb_ca_en50221.h"
+
+#ifdef CONFIG_DVB_USB_DEBUG
+#define dprintk(var, level, args...) \
+	do { if ((var & level)) printk(args); } while (0)
+#define DVB_USB_DEBUG_STATUS
+#else
+#define dprintk(args...)
+#define debug_dump(b, l, func)
+#define DVB_USB_DEBUG_STATUS " (debugging is not enabled)"
+#endif
+
+#define debug_dump(b, l, func) {\
+	int loop_; \
+	for (loop_ = 0; loop_ < l; loop_++) \
+		func("%02x ", b[loop_]); \
+	func("\n");\
+}
+
+#define deb_info(args...) dprintk(dvb_usb_anysee_debug, 0x01, args)
+#define deb_xfer(args...) dprintk(dvb_usb_anysee_debug, 0x02, args)
+#define deb_rc(args...)   dprintk(dvb_usb_anysee_debug, 0x04, args)
+#define deb_reg(args...)  dprintk(dvb_usb_anysee_debug, 0x08, args)
+#define deb_i2c(args...)  dprintk(dvb_usb_anysee_debug, 0x10, args)
+#define deb_fw(args...)   dprintk(dvb_usb_anysee_debug, 0x20, args)
+
+#undef err
+#define err(format, arg...)  printk(KERN_ERR     DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
+#undef info
+#define info(format, arg...) printk(KERN_INFO    DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
+#undef warn
+#define warn(format, arg...) printk(KERN_WARNING DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
+
+enum cmd {
+	CMD_I2C_READ            = 0x33,
+	CMD_I2C_WRITE           = 0x31,
+	CMD_REG_READ            = 0xb0,
+	CMD_REG_WRITE           = 0xb1,
+	CMD_STREAMING_CTRL      = 0x12,
+	CMD_LED_AND_IR_CTRL     = 0x16,
+	CMD_GET_IR_CODE         = 0x41,
+	CMD_GET_HW_INFO         = 0x19,
+	CMD_SMARTCARD           = 0x34,
+	CMD_CI                  = 0x37,
+};
+
+struct anysee_state {
+	u8 hw; /* PCB ID */
+	u8 seq;
+	u8 fe_id:1; /* frondend ID */
+	u8 has_ci:1;
+	struct dvb_ca_en50221 ci;
+	unsigned long ci_cam_ready; /* jiffies */
+};
+
+#define ANYSEE_HW_507T    2 /* E30 */
+#define ANYSEE_HW_507CD   6 /* E30 Plus */
+#define ANYSEE_HW_507DC  10 /* E30 C Plus */
+#define ANYSEE_HW_507SI  11 /* E30 S2 Plus */
+#define ANYSEE_HW_507FA  15 /* E30 Combo Plus / E30 C Plus */
+#define ANYSEE_HW_508TC  18 /* E7 TC */
+#define ANYSEE_HW_508S2  19 /* E7 S2 */
+#define ANYSEE_HW_508T2C 20 /* E7 T2C */
+#define ANYSEE_HW_508PTC 21 /* E7 PTC Plus */
+#define ANYSEE_HW_508PS2 22 /* E7 PS2 Plus */
+
+#define REG_IOA       0x80 /* Port A (bit addressable) */
+#define REG_IOB       0x90 /* Port B (bit addressable) */
+#define REG_IOC       0xa0 /* Port C (bit addressable) */
+#define REG_IOD       0xb0 /* Port D (bit addressable) */
+#define REG_IOE       0xb1 /* Port E (NOT bit addressable) */
+#define REG_OEA       0xb2 /* Port A Output Enable */
+#define REG_OEB       0xb3 /* Port B Output Enable */
+#define REG_OEC       0xb4 /* Port C Output Enable */
+#define REG_OED       0xb5 /* Port D Output Enable */
+#define REG_OEE       0xb6 /* Port E Output Enable */
+
+#endif
+
+/***************************************************************************
+ * USB API description (reverse engineered)
+ ***************************************************************************
+
+Transaction flow:
+=================
+BULK[00001] >>> REQUEST PACKET 64 bytes
+BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY)
+BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY)
+
+General reply packet(s) are always used if not own reply defined.
+
+============================================================================
+| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY)
+============================================================================
+|    00 | reply data (if any) from previous transaction
+|       | Just same reply packet as returned during previous transaction.
+|       | Needed only if reply is missed in previous transaction.
+|       | Just skip normally.
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY)
+============================================================================
+|    00 | reply data (if any)
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | I2C WRITE REQUEST PACKET
+============================================================================
+|    00 | 0x31 I2C write command
+----------------------------------------------------------------------------
+|    01 | i2c address
+----------------------------------------------------------------------------
+|    02 | data length
+|       | 0x02 (for typical I2C reg / val pair)
+----------------------------------------------------------------------------
+|    03 | 0x01
+----------------------------------------------------------------------------
+| 04-   | data
+----------------------------------------------------------------------------
+|   -59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | I2C READ REQUEST PACKET
+============================================================================
+|    00 | 0x33 I2C read command
+----------------------------------------------------------------------------
+|    01 | i2c address + 1
+----------------------------------------------------------------------------
+|    02 | register
+----------------------------------------------------------------------------
+|    03 | 0x00
+----------------------------------------------------------------------------
+|    04 | 0x00
+----------------------------------------------------------------------------
+|    05 | data length
+----------------------------------------------------------------------------
+| 06-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET
+============================================================================
+|    00 | 0xb1 register write command
+----------------------------------------------------------------------------
+| 01-02 | register
+----------------------------------------------------------------------------
+|    03 | 0x01
+----------------------------------------------------------------------------
+|    04 | value
+----------------------------------------------------------------------------
+| 05-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET
+============================================================================
+|    00 | 0xb0 register read command
+----------------------------------------------------------------------------
+| 01-02 | register
+----------------------------------------------------------------------------
+|    03 | 0x01
+----------------------------------------------------------------------------
+| 04-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | LED CONTROL REQUEST PACKET
+============================================================================
+|    00 | 0x16 LED and IR control command
+----------------------------------------------------------------------------
+|    01 | 0x01 (LED)
+----------------------------------------------------------------------------
+|    03 | 0x00 blink
+|       | 0x01 lights continuously
+----------------------------------------------------------------------------
+|    04 | blink interval
+|       | 0x00 fastest (looks like LED lights continuously)
+|       | 0xff slowest
+----------------------------------------------------------------------------
+| 05-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | IR CONTROL REQUEST PACKET
+============================================================================
+|    00 | 0x16 LED and IR control command
+----------------------------------------------------------------------------
+|    01 | 0x02 (IR)
+----------------------------------------------------------------------------
+|    03 | 0x00 IR disabled
+|       | 0x01 IR enabled
+----------------------------------------------------------------------------
+| 04-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | STREAMING CONTROL REQUEST PACKET
+============================================================================
+|    00 | 0x12 streaming control command
+----------------------------------------------------------------------------
+|    01 | 0x00 streaming disabled
+|       | 0x01 streaming enabled
+----------------------------------------------------------------------------
+|    02 | 0x00
+----------------------------------------------------------------------------
+| 03-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | REMOTE CONTROL REQUEST PACKET
+============================================================================
+|    00 | 0x41 remote control command
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | REMOTE CONTROL REPLY PACKET
+============================================================================
+|    00 | 0x00 code not received
+|       | 0x01 code received
+----------------------------------------------------------------------------
+|    01 | remote control code
+----------------------------------------------------------------------------
+| 02-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GET HARDWARE INFO REQUEST PACKET
+============================================================================
+|    00 | 0x19 get hardware info command
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GET HARDWARE INFO REPLY PACKET
+============================================================================
+|    00 | hardware id
+----------------------------------------------------------------------------
+| 01-02 | firmware version
+----------------------------------------------------------------------------
+| 03-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | SMART CARD READER PACKET
+============================================================================
+|    00 | 0x34 smart card reader command
+----------------------------------------------------------------------------
+|    xx |
+----------------------------------------------------------------------------
+| xx-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+*/