diff options
| author | Mauro Carvalho Chehab <m.chehab@samsung.com> | 2014-07-25 21:02:14 +0400 |
|---|---|---|
| committer | Mauro Carvalho Chehab <m.chehab@samsung.com> | 2014-07-30 22:44:25 +0400 |
| commit | cfd0c77d0830d33288e9da17aa10db3a61de601a (patch) | |
| tree | 5c5bdd468bc6a3b7c7f4ddba3fed70c4e8d9743e /drivers/media/usb/au0828/au0828-i2c.c | |
| parent | 7f196789b3ffee243b681d3e7dab8890038db856 (diff) | |
| download | linux-cfd0c77d0830d33288e9da17aa10db3a61de601a.tar.xz | |
[media] au0828: improve I2C speed
Commits 21dc61d3c0a4 and 7a1dd50b89d4 reduced the board I2C
speed to 20 MHz by default, due to a I2C stretch issue:
while xc5000 uses i2c stretch when a command is sent to it,
au0828 doesn't support this feature.
However, this is needed only for Xceive tuners. The other
I2C devices can work at the max speed.
So, revert the workarounds at board level, handling it at
I2C level, only when talking with xc5000.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Diffstat (limited to 'drivers/media/usb/au0828/au0828-i2c.c')
| -rw-r--r-- | drivers/media/usb/au0828/au0828-i2c.c | 37 |
1 files changed, 24 insertions, 13 deletions
diff --git a/drivers/media/usb/au0828/au0828-i2c.c b/drivers/media/usb/au0828/au0828-i2c.c index 17ec3651b10e..daaeaf1b089c 100644 --- a/drivers/media/usb/au0828/au0828-i2c.c +++ b/drivers/media/usb/au0828/au0828-i2c.c @@ -141,25 +141,27 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap, { int i, strobe = 0; struct au0828_dev *dev = i2c_adap->algo_data; + u8 i2c_speed = dev->board.i2c_clk_divider; dprintk(4, "%s()\n", __func__); au0828_write(dev, AU0828_I2C_MULTIBYTE_MODE_2FF, 0x01); - /* Set the I2C clock */ if (((dev->board.tuner_type == TUNER_XC5000) || (dev->board.tuner_type == TUNER_XC5000C)) && - (dev->board.tuner_addr == msg->addr) && - (msg->len == 64)) { - /* Hack to speed up firmware load. The xc5000 lets us do up - to 400 KHz when in firmware download mode */ - au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, - AU0828_I2C_CLK_250KHZ); - } else { - /* Use the i2c clock speed in the board configuration */ - au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, - dev->board.i2c_clk_divider); + (dev->board.tuner_addr == msg->addr)) { + /* + * Due to I2C clock stretch, we need to use a lower speed + * on xc5000 for commands. However, firmware transfer can + * speed up to 400 KHz. + */ + if (msg->len == 64) + i2c_speed = AU0828_I2C_CLK_250KHZ; + else + i2c_speed = AU0828_I2C_CLK_20KHZ; } + /* Set the I2C clock */ + au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, i2c_speed); /* Hardware needs 8 bit addresses */ au0828_write(dev, AU0828_I2C_DEST_ADDR_203, msg->addr << 1); @@ -228,15 +230,24 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap, const struct i2c_msg *msg, int joined) { struct au0828_dev *dev = i2c_adap->algo_data; + u8 i2c_speed = dev->board.i2c_clk_divider; int i; dprintk(4, "%s()\n", __func__); au0828_write(dev, AU0828_I2C_MULTIBYTE_MODE_2FF, 0x01); + /* + * Due to xc5000c clock stretch, we cannot use full speed at + * readings from xc5000, as otherwise they'll fail. + */ + if (((dev->board.tuner_type == TUNER_XC5000) || + (dev->board.tuner_type == TUNER_XC5000C)) && + (dev->board.tuner_addr == msg->addr)) + i2c_speed = AU0828_I2C_CLK_20KHZ; + /* Set the I2C clock */ - au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, - dev->board.i2c_clk_divider); + au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, i2c_speed); /* Hardware needs 8 bit addresses */ au0828_write(dev, AU0828_I2C_DEST_ADDR_203, msg->addr << 1); |