[media] Rename media/dvb as media/pci

The remaining dvb drivers are pci, so rename them to match the
bus.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 170 insertions, 0 deletions

diff --git a/drivers/media/pci/mantis/mantis_pci.c b/drivers/media/pci/mantis/mantis_pci.c
new file mode 100644
index 000000000000..371558af2d96
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_pci.c
@@ -0,0 +1,170 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <linux/kmod.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_pci.h"
+
+#define DRIVER_NAME		"Mantis Core"
+
+int __devinit mantis_pci_init(struct mantis_pci *mantis)
+{
+	u8 latency;
+	struct mantis_hwconfig *config	= mantis->hwconfig;
+	struct pci_dev *pdev		= mantis->pdev;
+	int err, ret = 0;
+
+	dprintk(MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n",
+		config->model_name,
+		config->dev_type,
+		mantis->pdev->bus->number,
+		PCI_SLOT(mantis->pdev->devfn),
+		PCI_FUNC(mantis->pdev->devfn));
+
+	err = pci_enable_device(pdev);
+	if (err != 0) {
+		ret = -ENODEV;
+		dprintk(MANTIS_ERROR, 1, "ERROR: PCI enable failed <%i>", err);
+		goto fail0;
+	}
+
+	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (err != 0) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Unable to obtain 32 bit DMA <%i>", err);
+		ret = -ENOMEM;
+		goto fail1;
+	}
+
+	pci_set_master(pdev);
+
+	if (!request_mem_region(pci_resource_start(pdev, 0),
+				pci_resource_len(pdev, 0),
+				DRIVER_NAME)) {
+
+		dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 Request failed !");
+		ret = -ENODEV;
+		goto fail1;
+	}
+
+	mantis->mmio = ioremap(pci_resource_start(pdev, 0),
+			       pci_resource_len(pdev, 0));
+
+	if (!mantis->mmio) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 remap failed !");
+		ret = -ENODEV;
+		goto fail2;
+	}
+
+	pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency);
+	mantis->latency = latency;
+	mantis->revision = pdev->revision;
+
+	dprintk(MANTIS_ERROR, 0, "    Mantis Rev %d [%04x:%04x], ",
+		mantis->revision,
+		mantis->pdev->subsystem_vendor,
+		mantis->pdev->subsystem_device);
+
+	dprintk(MANTIS_ERROR, 0,
+		"irq: %d, latency: %d\n    memory: 0x%lx, mmio: 0x%p\n",
+		mantis->pdev->irq,
+		mantis->latency,
+		mantis->mantis_addr,
+		mantis->mmio);
+
+	err = request_irq(pdev->irq,
+			  config->irq_handler,
+			  IRQF_SHARED,
+			  DRIVER_NAME,
+			  mantis);
+
+	if (err != 0) {
+
+		dprintk(MANTIS_ERROR, 1, "ERROR: IRQ registration failed ! <%d>", err);
+		ret = -ENODEV;
+		goto fail3;
+	}
+
+	pci_set_drvdata(pdev, mantis);
+	return ret;
+
+	/* Error conditions */
+fail3:
+	dprintk(MANTIS_ERROR, 1, "ERROR: <%d> I/O unmap", ret);
+	if (mantis->mmio)
+		iounmap(mantis->mmio);
+
+fail2:
+	dprintk(MANTIS_ERROR, 1, "ERROR: <%d> releasing regions", ret);
+	release_mem_region(pci_resource_start(pdev, 0),
+			   pci_resource_len(pdev, 0));
+
+fail1:
+	dprintk(MANTIS_ERROR, 1, "ERROR: <%d> disabling device", ret);
+	pci_disable_device(pdev);
+
+fail0:
+	dprintk(MANTIS_ERROR, 1, "ERROR: <%d> exiting", ret);
+	pci_set_drvdata(pdev, NULL);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mantis_pci_init);
+
+void mantis_pci_exit(struct mantis_pci *mantis)
+{
+	struct pci_dev *pdev = mantis->pdev;
+
+	dprintk(MANTIS_NOTICE, 1, " mem: 0x%p", mantis->mmio);
+	free_irq(pdev->irq, mantis);
+	if (mantis->mmio) {
+		iounmap(mantis->mmio);
+		release_mem_region(pci_resource_start(pdev, 0),
+				   pci_resource_len(pdev, 0));
+	}
+
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+}
+EXPORT_SYMBOL_GPL(mantis_pci_exit);
+
+MODULE_DESCRIPTION("Mantis PCI DTV bridge driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");