Merge tag 'nand/for-4.19' of git://git.infradead.org/linux-mtd into mtd/next

Pull NAND updates from Miquel Raynal:

"
 NAND core changes:
 - Add the SPI-NAND framework.
 - Create a helper to find the best ECC configuration.
 - Create NAND controller operations.
 - Allocate dynamically ONFI parameters structure.
 - Add defines for ONFI version bits.
 - Add manufacturer fixup for ONFI parameter page.
 - Add an option to specify NAND chip as a boot device.
 - Add Reed-Solomon error correction algorithm.
 - Better name for the controller structure.
 - Remove unused caller_is_module() definition.
 - Make subop helpers return unsigned values.
 - Expose _notsupp() helpers for raw page accessors.
 - Add default values for dynamic timings.
 - Kill the chip->scan_bbt() hook.
 - Rename nand_default_bbt() into nand_create_bbt().
 - Start to clean the nand_chip structure.
 - Remove stale prototype from rawnand.h.

 Raw NAND controllers drivers changes:
 - Qcom: structuring cleanup.
 - Denali: use core helper to find the best ECC configuration.
 - Possible build of almost all drivers by adding a dependency on
   COMPILE_TEST for almost all of them in Kconfig, implies various
   fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even
   changes in sparc64 and ia64 architectures.
 - Clean the ->probe() functions error path of a lot of drivers.
 - Migrate all drivers to use nand_scan() instead of
   nand_scan_ident()/nand_scan_tail() pair.
 - Use mtd_device_register() where applicable to simplify the code.
 - Marvell:
   * Handle on-die ECC.
   * Better clocks handling.
   * Remove bogus comment.
   * Add suspend and resume support.
 - Tegra: add NAND controller driver.
 - Atmel:
   * Add module param to avoid using dma.
   * Drop Wenyou Yang from MAINTAINERS.
 - Denali: optimize timings handling.
 - FSMC: Stop using chip->read_buf().
 - FSL:
   * Switch to SPDX license tag identifiers.
   * Fix qualifiers in MXC init functions.

 Raw NAND chip drivers changes:
 - Micron:
   * Add fixup for ONFI revision.
   * Update ecc_stats.corrected.
   * Make ECC activation stateful.
   * Avoid enabling/disabling ECC when it can't be disabled.
   * Get the actual number of bitflips.
   * Allow forced on-die ECC.
   * Support 8/512 on-die ECC.
   * Fix on-die ECC detection logic.
 - Hynix:
   * Fix decoding the OOB size on H27UCG8T2BTR.
   * Use ->exec_op() in hynix_nand_reg_write_op().
"

1 files changed, 154 insertions, 0 deletions

diff --git a/drivers/input/misc/sc27xx-vibra.c b/drivers/input/misc/sc27xx-vibra.c
new file mode 100644
index 000000000000..295251abbdac
--- /dev/null
+++ b/drivers/input/misc/sc27xx-vibra.c
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Spreadtrum Communications Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+
+#define CUR_DRV_CAL_SEL		GENMASK(13, 12)
+#define SLP_LDOVIBR_PD_EN	BIT(9)
+#define LDO_VIBR_PD		BIT(8)
+
+struct vibra_info {
+	struct input_dev	*input_dev;
+	struct work_struct	play_work;
+	struct regmap		*regmap;
+	u32			base;
+	u32			strength;
+	bool			enabled;
+};
+
+static void sc27xx_vibra_set(struct vibra_info *info, bool on)
+{
+	if (on) {
+		regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD, 0);
+		regmap_update_bits(info->regmap, info->base,
+				   SLP_LDOVIBR_PD_EN, 0);
+		info->enabled = true;
+	} else {
+		regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD,
+				   LDO_VIBR_PD);
+		regmap_update_bits(info->regmap, info->base,
+				   SLP_LDOVIBR_PD_EN, SLP_LDOVIBR_PD_EN);
+		info->enabled = false;
+	}
+}
+
+static int sc27xx_vibra_hw_init(struct vibra_info *info)
+{
+	return regmap_update_bits(info->regmap, info->base, CUR_DRV_CAL_SEL, 0);
+}
+
+static void sc27xx_vibra_play_work(struct work_struct *work)
+{
+	struct vibra_info *info = container_of(work, struct vibra_info,
+					       play_work);
+
+	if (info->strength && !info->enabled)
+		sc27xx_vibra_set(info, true);
+	else if (info->strength == 0 && info->enabled)
+		sc27xx_vibra_set(info, false);
+}
+
+static int sc27xx_vibra_play(struct input_dev *input, void *data,
+			     struct ff_effect *effect)
+{
+	struct vibra_info *info = input_get_drvdata(input);
+
+	info->strength = effect->u.rumble.weak_magnitude;
+	schedule_work(&info->play_work);
+
+	return 0;
+}
+
+static void sc27xx_vibra_close(struct input_dev *input)
+{
+	struct vibra_info *info = input_get_drvdata(input);
+
+	cancel_work_sync(&info->play_work);
+	if (info->enabled)
+		sc27xx_vibra_set(info, false);
+}
+
+static int sc27xx_vibra_probe(struct platform_device *pdev)
+{
+	struct vibra_info *info;
+	int error;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!info->regmap) {
+		dev_err(&pdev->dev, "failed to get vibrator regmap.\n");
+		return -ENODEV;
+	}
+
+	error = device_property_read_u32(&pdev->dev, "reg", &info->base);
+	if (error) {
+		dev_err(&pdev->dev, "failed to get vibrator base address.\n");
+		return error;
+	}
+
+	info->input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!info->input_dev) {
+		dev_err(&pdev->dev, "failed to allocate input device.\n");
+		return -ENOMEM;
+	}
+
+	info->input_dev->name = "sc27xx:vibrator";
+	info->input_dev->id.version = 0;
+	info->input_dev->close = sc27xx_vibra_close;
+
+	input_set_drvdata(info->input_dev, info);
+	input_set_capability(info->input_dev, EV_FF, FF_RUMBLE);
+	INIT_WORK(&info->play_work, sc27xx_vibra_play_work);
+	info->enabled = false;
+
+	error = sc27xx_vibra_hw_init(info);
+	if (error) {
+		dev_err(&pdev->dev, "failed to initialize the vibrator.\n");
+		return error;
+	}
+
+	error = input_ff_create_memless(info->input_dev, NULL,
+					sc27xx_vibra_play);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register vibrator to FF.\n");
+		return error;
+	}
+
+	error = input_register_device(info->input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device.\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id sc27xx_vibra_of_match[] = {
+	{ .compatible = "sprd,sc2731-vibrator", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sc27xx_vibra_of_match);
+
+static struct platform_driver sc27xx_vibra_driver = {
+	.driver = {
+		.name = "sc27xx-vibrator",
+		.of_match_table = sc27xx_vibra_of_match,
+	},
+	.probe = sc27xx_vibra_probe,
+};
+
+module_platform_driver(sc27xx_vibra_driver);
+
+MODULE_DESCRIPTION("Spreadtrum SC27xx Vibrator Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Xiaotong Lu <xiaotong.lu@spreadtrum.com>");