IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters

Add a low-level IB driver for QLogic PCIe adapters.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

1 files changed, 557 insertions, 0 deletions

diff --git a/drivers/infiniband/hw/qib/qib_tx.c b/drivers/infiniband/hw/qib/qib_tx.c
new file mode 100644
index 000000000000..f7eb1ddff5f3
--- /dev/null
+++ b/drivers/infiniband/hw/qib/qib_tx.c
@@ -0,0 +1,557 @@
+/*
+ * Copyright (c) 2008, 2009, 2010 QLogic Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+
+#include "qib.h"
+
+static unsigned qib_hol_timeout_ms = 3000;
+module_param_named(hol_timeout_ms, qib_hol_timeout_ms, uint, S_IRUGO);
+MODULE_PARM_DESC(hol_timeout_ms,
+		 "duration of user app suspension after link failure");
+
+unsigned qib_sdma_fetch_arb = 1;
+module_param_named(fetch_arb, qib_sdma_fetch_arb, uint, S_IRUGO);
+MODULE_PARM_DESC(fetch_arb, "IBA7220: change SDMA descriptor arbitration");
+
+/**
+ * qib_disarm_piobufs - cancel a range of PIO buffers
+ * @dd: the qlogic_ib device
+ * @first: the first PIO buffer to cancel
+ * @cnt: the number of PIO buffers to cancel
+ *
+ * Cancel a range of PIO buffers. Used at user process close,
+ * in case it died while writing to a PIO buffer.
+ */
+void qib_disarm_piobufs(struct qib_devdata *dd, unsigned first, unsigned cnt)
+{
+	unsigned long flags;
+	unsigned i;
+	unsigned last;
+
+	last = first + cnt;
+	spin_lock_irqsave(&dd->pioavail_lock, flags);
+	for (i = first; i < last; i++) {
+		__clear_bit(i, dd->pio_need_disarm);
+		dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_BUF(i));
+	}
+	spin_unlock_irqrestore(&dd->pioavail_lock, flags);
+}
+
+/*
+ * This is called by a user process when it sees the DISARM_BUFS event
+ * bit is set.
+ */
+int qib_disarm_piobufs_ifneeded(struct qib_ctxtdata *rcd)
+{
+	struct qib_devdata *dd = rcd->dd;
+	unsigned i;
+	unsigned last;
+	unsigned n = 0;
+
+	last = rcd->pio_base + rcd->piocnt;
+	/*
+	 * Don't need uctxt_lock here, since user has called in to us.
+	 * Clear at start in case more interrupts set bits while we
+	 * are disarming
+	 */
+	if (rcd->user_event_mask) {
+		/*
+		 * subctxt_cnt is 0 if not shared, so do base
+		 * separately, first, then remaining subctxt, if any
+		 */
+		clear_bit(_QIB_EVENT_DISARM_BUFS_BIT, &rcd->user_event_mask[0]);
+		for (i = 1; i < rcd->subctxt_cnt; i++)
+			clear_bit(_QIB_EVENT_DISARM_BUFS_BIT,
+				  &rcd->user_event_mask[i]);
+	}
+	spin_lock_irq(&dd->pioavail_lock);
+	for (i = rcd->pio_base; i < last; i++) {
+		if (__test_and_clear_bit(i, dd->pio_need_disarm)) {
+			n++;
+			dd->f_sendctrl(rcd->ppd, QIB_SENDCTRL_DISARM_BUF(i));
+		}
+	}
+	spin_unlock_irq(&dd->pioavail_lock);
+	return 0;
+}
+
+static struct qib_pportdata *is_sdma_buf(struct qib_devdata *dd, unsigned i)
+{
+	struct qib_pportdata *ppd;
+	unsigned pidx;
+
+	for (pidx = 0; pidx < dd->num_pports; pidx++) {
+		ppd = dd->pport + pidx;
+		if (i >= ppd->sdma_state.first_sendbuf &&
+		    i < ppd->sdma_state.last_sendbuf)
+			return ppd;
+	}
+	return NULL;
+}
+
+/*
+ * Return true if send buffer is being used by a user context.
+ * Sets  _QIB_EVENT_DISARM_BUFS_BIT in user_event_mask as a side effect
+ */
+static int find_ctxt(struct qib_devdata *dd, unsigned bufn)
+{
+	struct qib_ctxtdata *rcd;
+	unsigned ctxt;
+	int ret = 0;
+
+	spin_lock(&dd->uctxt_lock);
+	for (ctxt = dd->first_user_ctxt; ctxt < dd->cfgctxts; ctxt++) {
+		rcd = dd->rcd[ctxt];
+		if (!rcd || bufn < rcd->pio_base ||
+		    bufn >= rcd->pio_base + rcd->piocnt)
+			continue;
+		if (rcd->user_event_mask) {
+			int i;
+			/*
+			 * subctxt_cnt is 0 if not shared, so do base
+			 * separately, first, then remaining subctxt, if any
+			 */
+			set_bit(_QIB_EVENT_DISARM_BUFS_BIT,
+				&rcd->user_event_mask[0]);
+			for (i = 1; i < rcd->subctxt_cnt; i++)
+				set_bit(_QIB_EVENT_DISARM_BUFS_BIT,
+					&rcd->user_event_mask[i]);
+		}
+		ret = 1;
+		break;
+	}
+	spin_unlock(&dd->uctxt_lock);
+
+	return ret;
+}
+
+/*
+ * Disarm a set of send buffers.  If the buffer might be actively being
+ * written to, mark the buffer to be disarmed later when it is not being
+ * written to.
+ *
+ * This should only be called from the IRQ error handler.
+ */
+void qib_disarm_piobufs_set(struct qib_devdata *dd, unsigned long *mask,
+			    unsigned cnt)
+{
+	struct qib_pportdata *ppd, *pppd[dd->num_pports];
+	unsigned i;
+	unsigned long flags;
+
+	for (i = 0; i < dd->num_pports; i++)
+		pppd[i] = NULL;
+
+	for (i = 0; i < cnt; i++) {
+		int which;
+		if (!test_bit(i, mask))
+			continue;
+		/*
+		 * If the buffer is owned by the DMA hardware,
+		 * reset the DMA engine.
+		 */
+		ppd = is_sdma_buf(dd, i);
+		if (ppd) {
+			pppd[ppd->port] = ppd;
+			continue;
+		}
+		/*
+		 * If the kernel is writing the buffer or the buffer is
+		 * owned by a user process, we can't clear it yet.
+		 */
+		spin_lock_irqsave(&dd->pioavail_lock, flags);
+		if (test_bit(i, dd->pio_writing) ||
+		    (!test_bit(i << 1, dd->pioavailkernel) &&
+		     find_ctxt(dd, i))) {
+			__set_bit(i, dd->pio_need_disarm);
+			which = 0;
+		} else {
+			which = 1;
+			dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_BUF(i));
+		}
+		spin_unlock_irqrestore(&dd->pioavail_lock, flags);
+	}
+
+	/* do cancel_sends once per port that had sdma piobufs in error */
+	for (i = 0; i < dd->num_pports; i++)
+		if (pppd[i])
+			qib_cancel_sends(pppd[i]);
+}
+
+/**
+ * update_send_bufs - update shadow copy of the PIO availability map
+ * @dd: the qlogic_ib device
+ *
+ * called whenever our local copy indicates we have run out of send buffers
+ */
+static void update_send_bufs(struct qib_devdata *dd)
+{
+	unsigned long flags;
+	unsigned i;
+	const unsigned piobregs = dd->pioavregs;
+
+	/*
+	 * If the generation (check) bits have changed, then we update the
+	 * busy bit for the corresponding PIO buffer.  This algorithm will
+	 * modify positions to the value they already have in some cases
+	 * (i.e., no change), but it's faster than changing only the bits
+	 * that have changed.
+	 *
+	 * We would like to do this atomicly, to avoid spinlocks in the
+	 * critical send path, but that's not really possible, given the
+	 * type of changes, and that this routine could be called on
+	 * multiple cpu's simultaneously, so we lock in this routine only,
+	 * to avoid conflicting updates; all we change is the shadow, and
+	 * it's a single 64 bit memory location, so by definition the update
+	 * is atomic in terms of what other cpu's can see in testing the
+	 * bits.  The spin_lock overhead isn't too bad, since it only
+	 * happens when all buffers are in use, so only cpu overhead, not
+	 * latency or bandwidth is affected.
+	 */
+	if (!dd->pioavailregs_dma)
+		return;
+	spin_lock_irqsave(&dd->pioavail_lock, flags);
+	for (i = 0; i < piobregs; i++) {
+		u64 pchbusy, pchg, piov, pnew;
+
+		piov = le64_to_cpu(dd->pioavailregs_dma[i]);
+		pchg = dd->pioavailkernel[i] &
+			~(dd->pioavailshadow[i] ^ piov);
+		pchbusy = pchg << QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT;
+		if (pchg && (pchbusy & dd->pioavailshadow[i])) {
+			pnew = dd->pioavailshadow[i] & ~pchbusy;
+			pnew |= piov & pchbusy;
+			dd->pioavailshadow[i] = pnew;
+		}
+	}
+	spin_unlock_irqrestore(&dd->pioavail_lock, flags);
+}
+
+/*
+ * Debugging code and stats updates if no pio buffers available.
+ */
+static noinline void no_send_bufs(struct qib_devdata *dd)
+{
+	dd->upd_pio_shadow = 1;
+
+	/* not atomic, but if we lose a stat count in a while, that's OK */
+	qib_stats.sps_nopiobufs++;
+}
+
+/*
+ * Common code for normal driver send buffer allocation, and reserved
+ * allocation.
+ *
+ * Do appropriate marking as busy, etc.
+ * Returns buffer pointer if one is found, otherwise NULL.
+ */
+u32 __iomem *qib_getsendbuf_range(struct qib_devdata *dd, u32 *pbufnum,
+				  u32 first, u32 last)
+{
+	unsigned i, j, updated = 0;
+	unsigned nbufs;
+	unsigned long flags;
+	unsigned long *shadow = dd->pioavailshadow;
+	u32 __iomem *buf;
+
+	if (!(dd->flags & QIB_PRESENT))
+		return NULL;
+
+	nbufs = last - first + 1; /* number in range to check */
+	if (dd->upd_pio_shadow) {
+		/*
+		 * Minor optimization.  If we had no buffers on last call,
+		 * start out by doing the update; continue and do scan even
+		 * if no buffers were updated, to be paranoid.
+		 */
+		update_send_bufs(dd);
+		updated++;
+	}
+	i = first;
+rescan:
+	/*
+	 * While test_and_set_bit() is atomic, we do that and then the
+	 * change_bit(), and the pair is not.  See if this is the cause
+	 * of the remaining armlaunch errors.
+	 */
+	spin_lock_irqsave(&dd->pioavail_lock, flags);
+	for (j = 0; j < nbufs; j++, i++) {
+		if (i > last)
+			i = first;
+		if (__test_and_set_bit((2 * i) + 1, shadow))
+			continue;
+		/* flip generation bit */
+		__change_bit(2 * i, shadow);
+		/* remember that the buffer can be written to now */
+		__set_bit(i, dd->pio_writing);
+		break;
+	}
+	spin_unlock_irqrestore(&dd->pioavail_lock, flags);
+
+	if (j == nbufs) {
+		if (!updated) {
+			/*
+			 * First time through; shadow exhausted, but may be
+			 * buffers available, try an update and then rescan.
+			 */
+			update_send_bufs(dd);
+			updated++;
+			i = first;
+			goto rescan;
+		}
+		no_send_bufs(dd);
+		buf = NULL;
+	} else {
+		if (i < dd->piobcnt2k)
+			buf = (u32 __iomem *)(dd->pio2kbase +
+				i * dd->palign);
+		else
+			buf = (u32 __iomem *)(dd->pio4kbase +
+				(i - dd->piobcnt2k) * dd->align4k);
+		if (pbufnum)
+			*pbufnum = i;
+		dd->upd_pio_shadow = 0;
+	}
+
+	return buf;
+}
+
+/*
+ * Record that the caller is finished writing to the buffer so we don't
+ * disarm it while it is being written and disarm it now if needed.
+ */
+void qib_sendbuf_done(struct qib_devdata *dd, unsigned n)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dd->pioavail_lock, flags);
+	__clear_bit(n, dd->pio_writing);
+	if (__test_and_clear_bit(n, dd->pio_need_disarm))
+		dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_BUF(n));
+	spin_unlock_irqrestore(&dd->pioavail_lock, flags);
+}
+
+/**
+ * qib_chg_pioavailkernel - change which send buffers are available for kernel
+ * @dd: the qlogic_ib device
+ * @start: the starting send buffer number
+ * @len: the number of send buffers
+ * @avail: true if the buffers are available for kernel use, false otherwise
+ */
+void qib_chg_pioavailkernel(struct qib_devdata *dd, unsigned start,
+	unsigned len, u32 avail, struct qib_ctxtdata *rcd)
+{
+	unsigned long flags;
+	unsigned end;
+	unsigned ostart = start;
+
+	/* There are two bits per send buffer (busy and generation) */
+	start *= 2;
+	end = start + len * 2;
+
+	spin_lock_irqsave(&dd->pioavail_lock, flags);
+	/* Set or clear the busy bit in the shadow. */
+	while (start < end) {
+		if (avail) {
+			unsigned long dma;
+			int i;
+
+			/*
+			 * The BUSY bit will never be set, because we disarm
+			 * the user buffers before we hand them back to the
+			 * kernel.  We do have to make sure the generation
+			 * bit is set correctly in shadow, since it could
+			 * have changed many times while allocated to user.
+			 * We can't use the bitmap functions on the full
+			 * dma array because it is always little-endian, so
+			 * we have to flip to host-order first.
+			 * BITS_PER_LONG is slightly wrong, since it's
+			 * always 64 bits per register in chip...
+			 * We only work on 64 bit kernels, so that's OK.
+			 */
+			i = start / BITS_PER_LONG;
+			__clear_bit(QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT + start,
+				    dd->pioavailshadow);
+			dma = (unsigned long)
+				le64_to_cpu(dd->pioavailregs_dma[i]);
+			if (test_bit((QLOGIC_IB_SENDPIOAVAIL_CHECK_SHIFT +
+				      start) % BITS_PER_LONG, &dma))
+				__set_bit(QLOGIC_IB_SENDPIOAVAIL_CHECK_SHIFT +
+					  start, dd->pioavailshadow);
+			else
+				__clear_bit(QLOGIC_IB_SENDPIOAVAIL_CHECK_SHIFT
+					    + start, dd->pioavailshadow);
+			__set_bit(start, dd->pioavailkernel);
+		} else {
+			__set_bit(start + QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT,
+				  dd->pioavailshadow);
+			__clear_bit(start, dd->pioavailkernel);
+		}
+		start += 2;
+	}
+
+	spin_unlock_irqrestore(&dd->pioavail_lock, flags);
+
+	dd->f_txchk_change(dd, ostart, len, avail, rcd);
+}
+
+/*
+ * Flush all sends that might be in the ready to send state, as well as any
+ * that are in the process of being sent.  Used whenever we need to be
+ * sure the send side is idle.  Cleans up all buffer state by canceling
+ * all pio buffers, and issuing an abort, which cleans up anything in the
+ * launch fifo.  The cancel is superfluous on some chip versions, but
+ * it's safer to always do it.
+ * PIOAvail bits are updated by the chip as if a normal send had happened.
+ */
+void qib_cancel_sends(struct qib_pportdata *ppd)
+{
+	struct qib_devdata *dd = ppd->dd;
+	struct qib_ctxtdata *rcd;
+	unsigned long flags;
+	unsigned ctxt;
+	unsigned i;
+	unsigned last;
+
+	/*
+	 * Tell PSM to disarm buffers again before trying to reuse them.
+	 * We need to be sure the rcd doesn't change out from under us
+	 * while we do so.  We hold the two locks sequentially.  We might
+	 * needlessly set some need_disarm bits as a result, if the
+	 * context is closed after we release the uctxt_lock, but that's
+	 * fairly benign, and safer than nesting the locks.
+	 */
+	for (ctxt = dd->first_user_ctxt; ctxt < dd->cfgctxts; ctxt++) {
+		spin_lock_irqsave(&dd->uctxt_lock, flags);
+		rcd = dd->rcd[ctxt];
+		if (rcd && rcd->ppd == ppd) {
+			last = rcd->pio_base + rcd->piocnt;
+			if (rcd->user_event_mask) {
+				/*
+				 * subctxt_cnt is 0 if not shared, so do base
+				 * separately, first, then remaining subctxt,
+				 * if any
+				 */
+				set_bit(_QIB_EVENT_DISARM_BUFS_BIT,
+					&rcd->user_event_mask[0]);
+				for (i = 1; i < rcd->subctxt_cnt; i++)
+					set_bit(_QIB_EVENT_DISARM_BUFS_BIT,
+						&rcd->user_event_mask[i]);
+			}
+			i = rcd->pio_base;
+			spin_unlock_irqrestore(&dd->uctxt_lock, flags);
+			spin_lock_irqsave(&dd->pioavail_lock, flags);
+			for (; i < last; i++)
+				__set_bit(i, dd->pio_need_disarm);
+			spin_unlock_irqrestore(&dd->pioavail_lock, flags);
+		} else
+			spin_unlock_irqrestore(&dd->uctxt_lock, flags);
+	}
+
+	if (!(dd->flags & QIB_HAS_SEND_DMA))
+		dd->f_sendctrl(ppd, QIB_SENDCTRL_DISARM_ALL |
+				    QIB_SENDCTRL_FLUSH);
+}
+
+/*
+ * Force an update of in-memory copy of the pioavail registers, when
+ * needed for any of a variety of reasons.
+ * If already off, this routine is a nop, on the assumption that the
+ * caller (or set of callers) will "do the right thing".
+ * This is a per-device operation, so just the first port.
+ */
+void qib_force_pio_avail_update(struct qib_devdata *dd)
+{
+	dd->f_sendctrl(dd->pport, QIB_SENDCTRL_AVAIL_BLIP);
+}
+
+void qib_hol_down(struct qib_pportdata *ppd)
+{
+	/*
+	 * Cancel sends when the link goes DOWN so that we aren't doing it
+	 * at INIT when we might be trying to send SMI packets.
+	 */
+	if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG))
+		qib_cancel_sends(ppd);
+}
+
+/*
+ * Link is at INIT.
+ * We start the HoL timer so we can detect stuck packets blocking SMP replies.
+ * Timer may already be running, so use mod_timer, not add_timer.
+ */
+void qib_hol_init(struct qib_pportdata *ppd)
+{
+	if (ppd->hol_state != QIB_HOL_INIT) {
+		ppd->hol_state = QIB_HOL_INIT;
+		mod_timer(&ppd->hol_timer,
+			  jiffies + msecs_to_jiffies(qib_hol_timeout_ms));
+	}
+}
+
+/*
+ * Link is up, continue any user processes, and ensure timer
+ * is a nop, if running.  Let timer keep running, if set; it
+ * will nop when it sees the link is up.
+ */
+void qib_hol_up(struct qib_pportdata *ppd)
+{
+	ppd->hol_state = QIB_HOL_UP;
+}
+
+/*
+ * This is only called via the timer.
+ */
+void qib_hol_event(unsigned long opaque)
+{
+	struct qib_pportdata *ppd = (struct qib_pportdata *)opaque;
+
+	/* If hardware error, etc, skip. */
+	if (!(ppd->dd->flags & QIB_INITTED))
+		return;
+
+	if (ppd->hol_state != QIB_HOL_UP) {
+		/*
+		 * Try to flush sends in case a stuck packet is blocking
+		 * SMP replies.
+		 */
+		qib_hol_down(ppd);
+		mod_timer(&ppd->hol_timer,
+			  jiffies + msecs_to_jiffies(qib_hol_timeout_ms));
+	}
+}