Merge tag 'iio-fixes-for-4.1a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

The usual mixed bag of fixes for IIO in the 4.1 cycle.

Second version of this pull request as a small fix to a fix turned
up before Greg pulled it for a cc10001 patch near the top of the tree.

One core fix

* Set updated for a iio kfifo was incorrectly set to false during a failed
  update, resulting in atttempts to repeat the failed operation appearing
  to succeed.

This time I've decided to list the driver fixes in alphabetical order rather
than 'randomly'.

* axp288_adc - a recent change added a check for valid info masks when
  reading channels from consumer drivers.
* bmp280 - temperature compensation was failing to read the tfine value, hence
  causing a temperature of 0 to always be returned and incorrect presure
  measurements.
* cc10001 - Fix channel number mapping when some channels are reserved for
  remote CPUs. Fix an issue with the use of the power-up/power-down register
  (basically wrong polarity). Fix an issue due to the missinterpretting the
  return value from regulator_get_voltage. Add a delay before the start bit
  as recommended for the hardware to avoid data corruption.
* hid pressure - fix channel spec of modfiied, but no modifier (which makes no
  sense!)
* hid proximity - fix channel spec of modified, but no modifier (which makes
  no sense!). Fix a memory leak in the probe function.
* mcp320x - occasional incorrect readings on dma using spi busses due to
  cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers.
* mma9551 - buffer overrun fix (miss specified maximum length of buffers)
* mma9553 - endian fix on status message. Add an enable element for activity
  channel. Input checking for activity period to avoid rather unpredictable
  results.
* spmi-vadc - fix an overflow in the output value normalization seen on some
  boards.
* st-snesors - oops due to use of a mutex that is not yet initialized during
  probe.
* xilinx adc - Some wrong register addresses, a wrong address for vccaux
  channel, incorrect scale on VREFP and incorrect sign on VREFN.

6 files changed, 53 insertions, 43 deletions

diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
index 08bcfb061ca5..56008a86b78f 100644
--- a/drivers/iio/adc/axp288_adc.c
+++ b/drivers/iio/adc/axp288_adc.c
@@ -53,39 +53,42 @@ static const struct iio_chan_spec const axp288_adc_channels[] = {
 		.channel = 0,
 		.address = AXP288_TS_ADC_H,
 		.datasheet_name = "TS_PIN",
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 	}, {
 		.indexed = 1,
 		.type = IIO_TEMP,
 		.channel = 1,
 		.address = AXP288_PMIC_ADC_H,
 		.datasheet_name = "PMIC_TEMP",
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 	}, {
 		.indexed = 1,
 		.type = IIO_TEMP,
 		.channel = 2,
 		.address = AXP288_GP_ADC_H,
 		.datasheet_name = "GPADC",
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 	}, {
 		.indexed = 1,
 		.type = IIO_CURRENT,
 		.channel = 3,
 		.address = AXP20X_BATT_CHRG_I_H,
 		.datasheet_name = "BATT_CHG_I",
-		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 	}, {
 		.indexed = 1,
 		.type = IIO_CURRENT,
 		.channel = 4,
 		.address = AXP20X_BATT_DISCHRG_I_H,
 		.datasheet_name = "BATT_DISCHRG_I",
-		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 	}, {
 		.indexed = 1,
 		.type = IIO_VOLTAGE,
 		.channel = 5,
 		.address = AXP20X_BATT_V_H,
 		.datasheet_name = "BATT_V",
-		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 	},
 };
 
@@ -151,9 +154,6 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
 						chan->address))
 			dev_err(&indio_dev->dev, "TS pin restore\n");
 		break;
-	case IIO_CHAN_INFO_PROCESSED:
-		ret = axp288_adc_read_channel(val, chan->address, info->regmap);
-		break;
 	default:
 		ret = -EINVAL;
 	}
diff --git a/drivers/iio/adc/cc10001_adc.c b/drivers/iio/adc/cc10001_adc.c
index 51e2a83c9404..115f6e99a7fa 100644
--- a/drivers/iio/adc/cc10001_adc.c
+++ b/drivers/iio/adc/cc10001_adc.c
@@ -35,8 +35,9 @@
 #define CC10001_ADC_EOC_SET		BIT(0)
 
 #define CC10001_ADC_CHSEL_SAMPLED	0x0c
-#define CC10001_ADC_POWER_UP		0x10
-#define CC10001_ADC_POWER_UP_SET	BIT(0)
+#define CC10001_ADC_POWER_DOWN		0x10
+#define CC10001_ADC_POWER_DOWN_SET	BIT(0)
+
 #define CC10001_ADC_DEBUG		0x14
 #define CC10001_ADC_DATA_COUNT		0x20
 
@@ -62,7 +63,6 @@ struct cc10001_adc_device {
 	u16 *buf;
 
 	struct mutex lock;
-	unsigned long channel_map;
 	unsigned int start_delay_ns;
 	unsigned int eoc_delay_ns;
 };
@@ -79,6 +79,18 @@ static inline u32 cc10001_adc_read_reg(struct cc10001_adc_device *adc_dev,
 	return readl(adc_dev->reg_base + reg);
 }
 
+static void cc10001_adc_power_up(struct cc10001_adc_device *adc_dev)
+{
+	cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_DOWN, 0);
+	ndelay(adc_dev->start_delay_ns);
+}
+
+static void cc10001_adc_power_down(struct cc10001_adc_device *adc_dev)
+{
+	cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_DOWN,
+			      CC10001_ADC_POWER_DOWN_SET);
+}
+
 static void cc10001_adc_start(struct cc10001_adc_device *adc_dev,
 			      unsigned int channel)
 {
@@ -88,6 +100,7 @@ static void cc10001_adc_start(struct cc10001_adc_device *adc_dev,
 	val = (channel & CC10001_ADC_CH_MASK) | CC10001_ADC_MODE_SINGLE_CONV;
 	cc10001_adc_write_reg(adc_dev, CC10001_ADC_CONFIG, val);
 
+	udelay(1);
 	val = cc10001_adc_read_reg(adc_dev, CC10001_ADC_CONFIG);
 	val = val | CC10001_ADC_START_CONV;
 	cc10001_adc_write_reg(adc_dev, CC10001_ADC_CONFIG, val);
@@ -129,6 +142,7 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p)
 	struct iio_dev *indio_dev;
 	unsigned int delay_ns;
 	unsigned int channel;
+	unsigned int scan_idx;
 	bool sample_invalid;
 	u16 *data;
 	int i;
@@ -139,20 +153,17 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p)
 
 	mutex_lock(&adc_dev->lock);
 
-	cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP,
-			      CC10001_ADC_POWER_UP_SET);
-
-	/* Wait for 8 (6+2) clock cycles before activating START */
-	ndelay(adc_dev->start_delay_ns);
+	cc10001_adc_power_up(adc_dev);
 
 	/* Calculate delay step for eoc and sampled data */
 	delay_ns = adc_dev->eoc_delay_ns / CC10001_MAX_POLL_COUNT;
 
 	i = 0;
 	sample_invalid = false;
-	for_each_set_bit(channel, indio_dev->active_scan_mask,
+	for_each_set_bit(scan_idx, indio_dev->active_scan_mask,
 				  indio_dev->masklength) {
 
+		channel = indio_dev->channels[scan_idx].channel;
 		cc10001_adc_start(adc_dev, channel);
 
 		data[i] = cc10001_adc_poll_done(indio_dev, channel, delay_ns);
@@ -166,7 +177,7 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p)
 	}
 
 done:
-	cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, 0);
+	cc10001_adc_power_down(adc_dev);
 
 	mutex_unlock(&adc_dev->lock);
 
@@ -185,11 +196,7 @@ static u16 cc10001_adc_read_raw_voltage(struct iio_dev *indio_dev,
 	unsigned int delay_ns;
 	u16 val;
 
-	cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP,
-			      CC10001_ADC_POWER_UP_SET);
-
-	/* Wait for 8 (6+2) clock cycles before activating START */
-	ndelay(adc_dev->start_delay_ns);
+	cc10001_adc_power_up(adc_dev);
 
 	/* Calculate delay step for eoc and sampled data */
 	delay_ns = adc_dev->eoc_delay_ns / CC10001_MAX_POLL_COUNT;
@@ -198,7 +205,7 @@ static u16 cc10001_adc_read_raw_voltage(struct iio_dev *indio_dev,
 
 	val = cc10001_adc_poll_done(indio_dev, chan->channel, delay_ns);
 
-	cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, 0);
+	cc10001_adc_power_down(adc_dev);
 
 	return val;
 }
@@ -224,7 +231,7 @@ static int cc10001_adc_read_raw(struct iio_dev *indio_dev,
 
 	case IIO_CHAN_INFO_SCALE:
 		ret = regulator_get_voltage(adc_dev->reg);
-		if (ret)
+		if (ret < 0)
 			return ret;
 
 		*val = ret / 1000;
@@ -255,22 +262,22 @@ static const struct iio_info cc10001_adc_info = {
 	.update_scan_mode = &cc10001_update_scan_mode,
 };
 
-static int cc10001_adc_channel_init(struct iio_dev *indio_dev)
+static int cc10001_adc_channel_init(struct iio_dev *indio_dev,
+				    unsigned long channel_map)
 {
-	struct cc10001_adc_device *adc_dev = iio_priv(indio_dev);
 	struct iio_chan_spec *chan_array, *timestamp;
 	unsigned int bit, idx = 0;
 
-	indio_dev->num_channels = bitmap_weight(&adc_dev->channel_map,
-						CC10001_ADC_NUM_CHANNELS);
+	indio_dev->num_channels = bitmap_weight(&channel_map,
+						CC10001_ADC_NUM_CHANNELS) + 1;
 
-	chan_array = devm_kcalloc(&indio_dev->dev, indio_dev->num_channels + 1,
+	chan_array = devm_kcalloc(&indio_dev->dev, indio_dev->num_channels,
 				  sizeof(struct iio_chan_spec),
 				  GFP_KERNEL);
 	if (!chan_array)
 		return -ENOMEM;
 
-	for_each_set_bit(bit, &adc_dev->channel_map, CC10001_ADC_NUM_CHANNELS) {
+	for_each_set_bit(bit, &channel_map, CC10001_ADC_NUM_CHANNELS) {
 		struct iio_chan_spec *chan = &chan_array[idx];
 
 		chan->type = IIO_VOLTAGE;
@@ -305,6 +312,7 @@ static int cc10001_adc_probe(struct platform_device *pdev)
 	unsigned long adc_clk_rate;
 	struct resource *res;
 	struct iio_dev *indio_dev;
+	unsigned long channel_map;
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev));
@@ -313,9 +321,9 @@ static int cc10001_adc_probe(struct platform_device *pdev)
 
 	adc_dev = iio_priv(indio_dev);
 
-	adc_dev->channel_map = GENMASK(CC10001_ADC_NUM_CHANNELS - 1, 0);
+	channel_map = GENMASK(CC10001_ADC_NUM_CHANNELS - 1, 0);
 	if (!of_property_read_u32(node, "adc-reserved-channels", &ret))
-		adc_dev->channel_map &= ~ret;
+		channel_map &= ~ret;
 
 	adc_dev->reg = devm_regulator_get(&pdev->dev, "vref");
 	if (IS_ERR(adc_dev->reg))
@@ -361,7 +369,7 @@ static int cc10001_adc_probe(struct platform_device *pdev)
 	adc_dev->start_delay_ns = adc_dev->eoc_delay_ns * CC10001_WAIT_CYCLES;
 
 	/* Setup the ADC channels available on the device */
-	ret = cc10001_adc_channel_init(indio_dev);
+	ret = cc10001_adc_channel_init(indio_dev, channel_map);
 	if (ret < 0)
 		goto err_disable_clk;
 
diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c
index efbfd12a4bfd..8d9c9b9215dd 100644
--- a/drivers/iio/adc/mcp320x.c
+++ b/drivers/iio/adc/mcp320x.c
@@ -60,12 +60,12 @@ struct mcp320x {
 	struct spi_message msg;
 	struct spi_transfer transfer[2];
 
-	u8 tx_buf;
-	u8 rx_buf[2];
-
 	struct regulator *reg;
 	struct mutex lock;
 	const struct mcp320x_chip_info *chip_info;
+
+	u8 tx_buf ____cacheline_aligned;
+	u8 rx_buf[2];
 };
 
 static int mcp320x_channel_to_tx_data(int device_index,
diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
index 3211729bcb0b..0c4618b4d515 100644
--- a/drivers/iio/adc/qcom-spmi-vadc.c
+++ b/drivers/iio/adc/qcom-spmi-vadc.c
@@ -18,6 +18,7 @@
 #include <linux/iio/iio.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
+#include <linux/math64.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
@@ -471,11 +472,11 @@ static s32 vadc_calibrate(struct vadc_priv *vadc,
 			  const struct vadc_channel_prop *prop, u16 adc_code)
 {
 	const struct vadc_prescale_ratio *prescale;
-	s32 voltage;
+	s64 voltage;
 
 	voltage = adc_code - vadc->graph[prop->calibration].gnd;
 	voltage *= vadc->graph[prop->calibration].dx;
-	voltage = voltage / vadc->graph[prop->calibration].dy;
+	voltage = div64_s64(voltage, vadc->graph[prop->calibration].dy);
 
 	if (prop->calibration == VADC_CALIB_ABSOLUTE)
 		voltage += vadc->graph[prop->calibration].dx;
@@ -487,7 +488,7 @@ static s32 vadc_calibrate(struct vadc_priv *vadc,
 
 	voltage = voltage * prescale->den;
 
-	return voltage / prescale->num;
+	return div64_s64(voltage, prescale->num);
 }
 
 static int vadc_decimation_from_dt(u32 value)
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index a221f7329b79..ce93bd8e3f68 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -856,6 +856,7 @@ static int xadc_read_raw(struct iio_dev *indio_dev,
 			switch (chan->address) {
 			case XADC_REG_VCCINT:
 			case XADC_REG_VCCAUX:
+			case XADC_REG_VREFP:
 			case XADC_REG_VCCBRAM:
 			case XADC_REG_VCCPINT:
 			case XADC_REG_VCCPAUX:
@@ -996,7 +997,7 @@ static const struct iio_event_spec xadc_voltage_events[] = {
 	.num_event_specs = (_alarm) ? ARRAY_SIZE(xadc_voltage_events) : 0, \
 	.scan_index = (_scan_index), \
 	.scan_type = { \
-		.sign = 'u', \
+		.sign = ((_addr) == XADC_REG_VREFN) ? 's' : 'u', \
 		.realbits = 12, \
 		.storagebits = 16, \
 		.shift = 4, \
@@ -1008,7 +1009,7 @@ static const struct iio_event_spec xadc_voltage_events[] = {
 static const struct iio_chan_spec xadc_channels[] = {
 	XADC_CHAN_TEMP(0, 8, XADC_REG_TEMP),
 	XADC_CHAN_VOLTAGE(0, 9, XADC_REG_VCCINT, "vccint", true),
-	XADC_CHAN_VOLTAGE(1, 10, XADC_REG_VCCINT, "vccaux", true),
+	XADC_CHAN_VOLTAGE(1, 10, XADC_REG_VCCAUX, "vccaux", true),
 	XADC_CHAN_VOLTAGE(2, 14, XADC_REG_VCCBRAM, "vccbram", true),
 	XADC_CHAN_VOLTAGE(3, 5, XADC_REG_VCCPINT, "vccpint", true),
 	XADC_CHAN_VOLTAGE(4, 6, XADC_REG_VCCPAUX, "vccpaux", true),
diff --git a/drivers/iio/adc/xilinx-xadc.h b/drivers/iio/adc/xilinx-xadc.h
index c7487e8d7f80..54adc5087210 100644
--- a/drivers/iio/adc/xilinx-xadc.h
+++ b/drivers/iio/adc/xilinx-xadc.h
@@ -145,9 +145,9 @@ static inline int xadc_write_adc_reg(struct xadc *xadc, unsigned int reg,
 #define XADC_REG_MAX_VCCPINT	0x28
 #define XADC_REG_MAX_VCCPAUX	0x29
 #define XADC_REG_MAX_VCCO_DDR	0x2a
-#define XADC_REG_MIN_VCCPINT	0x2b
-#define XADC_REG_MIN_VCCPAUX	0x2c
-#define XADC_REG_MIN_VCCO_DDR	0x2d
+#define XADC_REG_MIN_VCCPINT	0x2c
+#define XADC_REG_MIN_VCCPAUX	0x2d
+#define XADC_REG_MIN_VCCO_DDR	0x2e
 
 #define XADC_REG_CONF0		0x40
 #define XADC_REG_CONF1		0x41