Merge v5.0-rc7 into drm-next

Backmerging for nouveau and imx that needed some fixes for next pulls.

Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 38 insertions, 10 deletions

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index bbc17530c23d..888980d4bc74 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -98,6 +98,8 @@
 #define DP0_STARTVAL		0x064c
 #define DP0_ACTIVEVAL		0x0650
 #define DP0_SYNCVAL		0x0654
+#define SYNCVAL_HS_POL_ACTIVE_LOW	(1 << 15)
+#define SYNCVAL_VS_POL_ACTIVE_LOW	(1 << 31)
 #define DP0_MISC		0x0658
 #define TU_SIZE_RECOMMENDED		(63) /* LSCLK cycles per TU */
 #define BPC_6				(0 << 5)
@@ -142,6 +144,8 @@
 #define DP0_LTLOOPCTRL		0x06d8
 #define DP0_SNKLTCTRL		0x06e4
 
+#define DP1_SRCCTRL		0x07a0
+
 /* PHY */
 #define DP_PHY_CTRL		0x0800
 #define DP_PHY_RST			BIT(28)  /* DP PHY Global Soft Reset */
@@ -150,6 +154,7 @@
 #define PHY_M1_RST			BIT(12)  /* Reset PHY1 Main Channel */
 #define PHY_RDY				BIT(16)  /* PHY Main Channels Ready */
 #define PHY_M0_RST			BIT(8)   /* Reset PHY0 Main Channel */
+#define PHY_2LANE			BIT(2)   /* PHY Enable 2 lanes */
 #define PHY_A0_EN			BIT(1)   /* PHY Aux Channel0 Enable */
 #define PHY_M0_EN			BIT(0)   /* PHY Main Channel0 Enable */
 
@@ -540,6 +545,7 @@ static int tc_aux_link_setup(struct tc_data *tc)
 	unsigned long rate;
 	u32 value;
 	int ret;
+	u32 dp_phy_ctrl;
 
 	rate = clk_get_rate(tc->refclk);
 	switch (rate) {
@@ -564,7 +570,10 @@ static int tc_aux_link_setup(struct tc_data *tc)
 	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
 	tc_write(SYS_PLLPARAM, value);
 
-	tc_write(DP_PHY_CTRL, BGREN | PWR_SW_EN | BIT(2) | PHY_A0_EN);
+	dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN;
+	if (tc->link.base.num_lanes == 2)
+		dp_phy_ctrl |= PHY_2LANE;
+	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
 
 	/*
 	 * Initially PLLs are in bypass. Force PLL parameter update,
@@ -720,7 +729,9 @@ static int tc_set_video_mode(struct tc_data *tc,
 
 	tc_write(DP0_ACTIVEVAL, (mode->vdisplay << 16) | (mode->hdisplay));
 
-	tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0));
+	tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0) |
+		 ((mode->flags & DRM_MODE_FLAG_NHSYNC) ? SYNCVAL_HS_POL_ACTIVE_LOW : 0) |
+		 ((mode->flags & DRM_MODE_FLAG_NVSYNC) ? SYNCVAL_VS_POL_ACTIVE_LOW : 0));
 
 	tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
 		 DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888);
@@ -830,12 +841,11 @@ static int tc_main_link_setup(struct tc_data *tc)
 	if (!tc->mode)
 		return -EINVAL;
 
-	/* from excel file - DP0_SrcCtrl */
-	tc_write(DP0_SRCCTRL, DP0_SRCCTRL_SCRMBLDIS | DP0_SRCCTRL_EN810B |
-		 DP0_SRCCTRL_LANESKEW | DP0_SRCCTRL_LANES_2 |
-		 DP0_SRCCTRL_BW27 | DP0_SRCCTRL_AUTOCORRECT);
-	/* from excel file - DP1_SrcCtrl */
-	tc_write(0x07a0, 0x00003083);
+	tc_write(DP0_SRCCTRL, tc_srcctrl(tc));
+	/* SSCG and BW27 on DP1 must be set to the same as on DP0 */
+	tc_write(DP1_SRCCTRL,
+		 (tc->link.spread ? DP0_SRCCTRL_SSCG : 0) |
+		 ((tc->link.base.rate != 162000) ? DP0_SRCCTRL_BW27 : 0));
 
 	rate = clk_get_rate(tc->refclk);
 	switch (rate) {
@@ -856,8 +866,11 @@ static int tc_main_link_setup(struct tc_data *tc)
 	}
 	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
 	tc_write(SYS_PLLPARAM, value);
+
 	/* Setup Main Link */
-	dp_phy_ctrl = BGREN | PWR_SW_EN | BIT(2) | PHY_A0_EN |  PHY_M0_EN;
+	dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN | PHY_M0_EN;
+	if (tc->link.base.num_lanes == 2)
+		dp_phy_ctrl |= PHY_2LANE;
 	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
 	msleep(100);
 
@@ -1106,10 +1119,20 @@ static bool tc_bridge_mode_fixup(struct drm_bridge *bridge,
 static enum drm_mode_status tc_connector_mode_valid(struct drm_connector *connector,
 				   struct drm_display_mode *mode)
 {
+	struct tc_data *tc = connector_to_tc(connector);
+	u32 req, avail;
+	u32 bits_per_pixel = 24;
+
 	/* DPI interface clock limitation: upto 154 MHz */
 	if (mode->clock > 154000)
 		return MODE_CLOCK_HIGH;
 
+	req = mode->clock * bits_per_pixel / 8;
+	avail = tc->link.base.num_lanes * tc->link.base.rate;
+
+	if (req > avail)
+		return MODE_BAD;
+
 	return MODE_OK;
 }
 
@@ -1187,7 +1210,8 @@ static int tc_bridge_attach(struct drm_bridge *bridge)
 	/* Create eDP connector */
 	drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs);
 	ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs,
-				 DRM_MODE_CONNECTOR_eDP);
+				 tc->panel ? DRM_MODE_CONNECTOR_eDP :
+				 DRM_MODE_CONNECTOR_DisplayPort);
 	if (ret)
 		return ret;
 
@@ -1196,6 +1220,10 @@ static int tc_bridge_attach(struct drm_bridge *bridge)
 
 	drm_display_info_set_bus_formats(&tc->connector.display_info,
 					 &bus_format, 1);
+	tc->connector.display_info.bus_flags =
+		DRM_BUS_FLAG_DE_HIGH |
+		DRM_BUS_FLAG_PIXDATA_NEGEDGE |
+		DRM_BUS_FLAG_SYNC_NEGEDGE;
 	drm_connector_attach_encoder(&tc->connector, tc->bridge.encoder);
 
 	return 0;