gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default

There are multiple instances of GPIO device tree nodes of the form:

foo {
	compatible = "acme,foo";
	...

	gpio0: gpio0@xxxxxxxx {
		compatible = "acme,bar";
		...
		gpio-controller;
	};

	gpio1: gpio1@xxxxxxxx {
		compatible = "acme,bar";
		...
		gpio-controller;
	};

	...
}

bazz {
	my-gpios = <&gpio0 ...>;
}

Case 1: The driver for "foo" populates struct device for these gpio*
nodes and then probes them using a driver that binds with "acme,bar".
This driver for "acme,bar" then registers the gpio* nodes with gpiolib.
This lines up with how DT nodes with the "compatible" property are
typically converted to struct devices and then registered with driver
core to probe them. This also allows the gpio* devices to hook into all
the driver core capabilities like runtime PM, probe deferral,
suspend/resume ordering, device links, etc.

Case 2: The driver for "foo" doesn't populate struct devices for these
gpio* nodes before registering them with gpiolib. Instead it just loops
through its child nodes and directly registers the gpio* nodes with
gpiolib.

Drivers that follow case 2 cause problems with fw_devlink=on. This is
because fw_devlink will prevent bazz from probing until there's a struct
device that has gpio0 as its fwnode (because bazz lists gpio0 as a GPIO
supplier). Once the struct device is available, fw_devlink will create a
device link with gpio0 device as the supplier and bazz device as the
consumer. After this point, since the gpio0 device will never bind to a
driver, the device link will prevent bazz device from ever probing.

Finding and refactoring all the instances of drivers that follow case 2
will cause a lot of code churn and it is not something that can be done
in one shot. In some instances it might not even be possible to refactor
them cleanly. Examples of such instances are [1] [2].

This patch works around this problem and avoids all the code churn by
simply setting the fwnode of the gpio_device and creating a stub driver
to bind to the gpio_device. This allows all the consumers to continue
probing when the driver follows case 2.

[1] - https://lore.kernel.org/lkml/20201014191235.7f71fcb4@xhacker.debian/
[2] - https://lore.kernel.org/lkml/e28e1f38d87c12a3c714a6573beba6e1@kernel.org/

Fixes: e590474768f1 ("driver core: Set fw_devlink=on by default")
Cc: Marc Zyngier <maz@kernel.org>
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210122193600.1415639-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 31 insertions, 7 deletions

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index b78a634cca24..8e0564c50840 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -590,13 +590,7 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
 		gdev->dev.of_node = gc->parent->of_node;
 	}
 
-#ifdef CONFIG_OF_GPIO
-	/* If the gpiochip has an assigned OF node this takes precedence */
-	if (gc->of_node)
-		gdev->dev.of_node = gc->of_node;
-	else
-		gc->of_node = gdev->dev.of_node;
-#endif
+	of_gpio_dev_init(gc, gdev);
 
 	gdev->id = ida_alloc(&gpio_ida, GFP_KERNEL);
 	if (gdev->id < 0) {
@@ -4205,6 +4199,29 @@ void gpiod_put_array(struct gpio_descs *descs)
 }
 EXPORT_SYMBOL_GPL(gpiod_put_array);
 
+static int gpio_stub_drv_probe(struct device *dev)
+{
+	/*
+	 * The DT node of some GPIO chips have a "compatible" property, but
+	 * never have a struct device added and probed by a driver to register
+	 * the GPIO chip with gpiolib. In such cases, fw_devlink=on will cause
+	 * the consumers of the GPIO chip to get probe deferred forever because
+	 * they will be waiting for a device associated with the GPIO chip
+	 * firmware node to get added and bound to a driver.
+	 *
+	 * To allow these consumers to probe, we associate the struct
+	 * gpio_device of the GPIO chip with the firmware node and then simply
+	 * bind it to this stub driver.
+	 */
+	return 0;
+}
+
+static struct device_driver gpio_stub_drv = {
+	.name = "gpio_stub_drv",
+	.bus = &gpio_bus_type,
+	.probe = gpio_stub_drv_probe,
+};
+
 static int __init gpiolib_dev_init(void)
 {
 	int ret;
@@ -4216,9 +4233,16 @@ static int __init gpiolib_dev_init(void)
 		return ret;
 	}
 
+	if (driver_register(&gpio_stub_drv) < 0) {
+		pr_err("gpiolib: could not register GPIO stub driver\n");
+		bus_unregister(&gpio_bus_type);
+		return ret;
+	}
+
 	ret = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, GPIOCHIP_NAME);
 	if (ret < 0) {
 		pr_err("gpiolib: failed to allocate char dev region\n");
+		driver_unregister(&gpio_stub_drv);
 		bus_unregister(&gpio_bus_type);
 		return ret;
 	}