Merge tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.12 kernel cycle.

  Core changes:

   - Return NULL from gpiod_get_optional() when GPIOLIB is disabled.
     This was a much discussed change. It affects use cases where people
     write drivers that might or might not be using GPIO resources. I
     have decided that this is the lesser evil right now.

   - Make gpiod_count() behave consistently across different hardware
     descriptions.

   - Fix the syntax around open drain/open source to not infer active
     high/low semantics.

  New drivers:

   - A new single-register fixed-direction framework driver for hardware
     that have lines controlled by a single register that just work in
     one direction (out or in), including IRQ support.

   - Support the Fintek F71889A GPIO SuperIO controller.

   - Support the National NI 169445 MMIO GPIO.

   - Support for the X-Gene derivative of the DWC GPIO controller

   - Support for the Rohm BD9571MWV-M PMIC GPIO controller.

   - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver
     and replace both the Gemini and the Moxa ART custom drivers with
     this driver.

  Driver improvements:

   - A whole slew of drivers have their spinlocks chaned to raw
     spinlocks as they provide irqchips, and thus we are progressing on
     realtime compliance.

   - Use devm_irq_alloc_descs() in a slew of drivers, getting managed
     resources.

   - Support for the embedded PWM controller inside the MVEBU driver.

   - Debounce, open source and open drain support for the Aspeed driver.

   - Misc smaller fixes like spelling and syntax and whatnot"

* tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
  gpio: f7188x: Add a missing break
  gpio: omap: return error if requested debounce time is not possible
  gpio: Add ROHM BD9571MWV-M PMIC GPIO driver
  gpio: gpio-wcove: fix GPIO IRQ status mask
  gpio: DT bindings, move tca9554 from pcf857x to pca953x
  gpio: move tca9554 from pcf857x to pca953x
  gpio: arizona: Correct check whether the pin is an input
  gpio: Add XRA1403 DTS binding documentation
  dt-bindings: add exar to vendor prefixes list
  gpio: gpio-wcove: fix irq pending status bit width
  gpio: dwapb: use dwapb_read instead of readl_relaxed
  gpio: aspeed: Add open-source and open-drain support
  gpio: aspeed: Add debounce support
  gpio: aspeed: dt: Add optional clocks property
  gpio: aspeed: dt: Fix description alignment in bindings document
  gpio: mvebu: Add limited PWM support
  gpio: Use unsigned int for interrupt numbers
  gpio: f7188x: Add F71889A GPIO support.
  gpio: core: Decouple open drain/source flag with active low/high
  gpio: arizona: Correct handling for reading input GPIOs
  ...

1 files changed, 28 insertions, 18 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 9b1bcb4d0df7..23ca51ee6b28 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -204,14 +204,15 @@ config GPIO_GE_FPGA
 	  and write pin state) for GPIO implemented in a number of GE single
 	  board computers.
 
-config GPIO_GEMINI
-	bool "Gemini GPIO"
-	depends on ARCH_GEMINI
+config GPIO_FTGPIO010
+	bool "Faraday FTGPIO010 GPIO"
 	depends on OF_GPIO
 	select GPIO_GENERIC
 	select GPIOLIB_IRQCHIP
+	default (ARCH_GEMINI || ARCH_MOXART)
 	help
-	  Support for common GPIOs found in Cortina systems Gemini platforms.
+	  Support for common GPIOs from the Faraday FTGPIO010 IP core, found in
+	  Cortina systems Gemini platforms, Moxa ART and others.
 
 config GPIO_GENERIC_PLATFORM
 	tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
@@ -308,14 +309,6 @@ config GPIO_MOCKUP
 	  tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in
 	  it.
 
-config GPIO_MOXART
-	bool "MOXART GPIO support"
-	depends on ARCH_MOXART || COMPILE_TEST
-	select GPIO_GENERIC
-	help
-	  Select this option to enable GPIO driver for
-	  MOXA ART SoC devices.
-
 config GPIO_MPC5200
 	def_bool y
 	depends on PPC_MPC52xx
@@ -387,6 +380,12 @@ config GPIO_RCAR
 	help
 	  Say yes here to support GPIO on Renesas R-Car SoCs.
 
+config GPIO_REG
+	bool
+	help
+	  A 32-bit single register GPIO fixed in/out implementation.  This
+	  can be used to represent any register as a set of GPIO signals.
+
 config GPIO_SPEAR_SPICS
 	bool "ST SPEAr13xx SPI Chip Select as GPIO support"
 	depends on PLAT_SPEAR
@@ -505,7 +504,7 @@ config GPIO_XILINX
 
 config GPIO_XLP
 	tristate "Netlogic XLP GPIO support"
-	depends on OF_GPIO && (CPU_XLP || ARCH_VULCAN || COMPILE_TEST)
+	depends on OF_GPIO && (CPU_XLP || ARCH_VULCAN || ARCH_THUNDER2 || COMPILE_TEST)
 	select GPIOLIB_IRQCHIP
 	help
 	  This driver provides support for GPIO interface on Netlogic XLP MIPS64
@@ -557,7 +556,7 @@ menu "Port-mapped I/O GPIO drivers"
 
 config GPIO_104_DIO_48E
 	tristate "ACCES 104-DIO-48E GPIO support"
-	depends on ISA_BUS_API
+	depends on PC104 && ISA_BUS_API
 	select GPIOLIB_IRQCHIP
 	help
 	  Enables GPIO support for the ACCES 104-DIO-48E series (104-DIO-48E,
@@ -567,7 +566,7 @@ config GPIO_104_DIO_48E
 
 config GPIO_104_IDIO_16
 	tristate "ACCES 104-IDIO-16 GPIO support"
-	depends on ISA_BUS_API
+	depends on PC104 && ISA_BUS_API
 	select GPIOLIB_IRQCHIP
 	help
 	  Enables GPIO support for the ACCES 104-IDIO-16 family (104-IDIO-16,
@@ -578,7 +577,7 @@ config GPIO_104_IDIO_16
 
 config GPIO_104_IDI_48
 	tristate "ACCES 104-IDI-48 GPIO support"
-	depends on ISA_BUS_API
+	depends on PC104 && ISA_BUS_API
 	select GPIOLIB_IRQCHIP
 	help
 	  Enables GPIO support for the ACCES 104-IDI-48 family (104-IDI-48A,
@@ -598,7 +597,7 @@ config GPIO_F7188X
 
 config GPIO_GPIO_MM
 	tristate "Diamond Systems GPIO-MM GPIO support"
-	depends on ISA_BUS_API
+	depends on PC104 && ISA_BUS_API
 	help
 	  Enables GPIO support for the Diamond Systems GPIO-MM and GPIO-MM-12.
 
@@ -753,7 +752,7 @@ config GPIO_PCA953X
 	  4 bits:	pca9536, pca9537
 
 	  8 bits:	max7310, max7315, pca6107, pca9534, pca9538, pca9554,
-			pca9556, pca9557, pca9574, tca6408, xra1202
+			pca9556, pca9557, pca9574, tca6408, tca9554, xra1202
 
 	  16 bits:	max7312, max7313, pca9535, pca9539, pca9555, pca9575,
 			tca6416
@@ -845,6 +844,17 @@ config GPIO_ARIZONA
 	help
 	  Support for GPIOs on Wolfson Arizona class devices.
 
+config GPIO_BD9571MWV
+	tristate "ROHM BD9571 GPIO support"
+	depends on MFD_BD9571MWV
+	help
+	  Support for GPIOs on ROHM BD9571 PMIC. There are two GPIOs
+	  available on the ROHM PMIC in total, both of which can also
+	  generate interrupts.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called gpio-bd9571mwv.
+
 config GPIO_CRYSTAL_COVE
 	tristate "GPIO support for Crystal Cove PMIC"
 	depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC