cpufreq: move freq change notifications to cpufreq core

Most of the drivers do following in their ->target_index() routines:

	struct cpufreq_freqs freqs;
	freqs.old = old freq...
	freqs.new = new freq...

	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);

	/* Change rate here */

	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);

This is replicated over all cpufreq drivers today and there doesn't exists a
good enough reason why this shouldn't be moved to cpufreq core instead.

There are few special cases though, like exynos5440, which doesn't do everything
on the call to ->target_index() routine and call some kind of bottom halves for
doing this work, work/tasklet/etc..

They may continue doing notification from their own code as flag:
CPUFREQ_ASYNC_NOTIFICATION is already set for them.

All drivers are also modified in this patch to avoid breaking 'git bisect', as
double notification would happen otherwise.

Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Russell King <linux@arm.linux.org.uk>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

1 files changed, 20 insertions, 34 deletions

diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c
index 0ae4dd7e1f2d..0767a4e29dfe 100644
--- a/drivers/cpufreq/kirkwood-cpufreq.c
+++ b/drivers/cpufreq/kirkwood-cpufreq.c
@@ -58,48 +58,34 @@ static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu)
 static int kirkwood_cpufreq_target(struct cpufreq_policy *policy,
 			    unsigned int index)
 {
-	struct cpufreq_freqs freqs;
 	unsigned int state = kirkwood_freq_table[index].driver_data;
 	unsigned long reg;
 
-	freqs.old = kirkwood_cpufreq_get_cpu_frequency(0);
-	freqs.new = kirkwood_freq_table[index].frequency;
+	local_irq_disable();
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+	/* Disable interrupts to the CPU */
+	reg = readl_relaxed(priv.base);
+	reg |= CPU_SW_INT_BLK;
+	writel_relaxed(reg, priv.base);
 
-	dev_dbg(priv.dev, "Attempting to set frequency to %i KHz\n",
-		kirkwood_freq_table[index].frequency);
-	dev_dbg(priv.dev, "old frequency was %i KHz\n",
-		kirkwood_cpufreq_get_cpu_frequency(0));
-
-	if (freqs.old != freqs.new) {
-		local_irq_disable();
-
-		/* Disable interrupts to the CPU */
-		reg = readl_relaxed(priv.base);
-		reg |= CPU_SW_INT_BLK;
-		writel_relaxed(reg, priv.base);
-
-		switch (state) {
-		case STATE_CPU_FREQ:
-			clk_disable(priv.powersave_clk);
-			break;
-		case STATE_DDR_FREQ:
-			clk_enable(priv.powersave_clk);
-			break;
-		}
+	switch (state) {
+	case STATE_CPU_FREQ:
+		clk_disable(priv.powersave_clk);
+		break;
+	case STATE_DDR_FREQ:
+		clk_enable(priv.powersave_clk);
+		break;
+	}
 
-		/* Wait-for-Interrupt, while the hardware changes frequency */
-		cpu_do_idle();
+	/* Wait-for-Interrupt, while the hardware changes frequency */
+	cpu_do_idle();
 
-		/* Enable interrupts to the CPU */
-		reg = readl_relaxed(priv.base);
-		reg &= ~CPU_SW_INT_BLK;
-		writel_relaxed(reg, priv.base);
+	/* Enable interrupts to the CPU */
+	reg = readl_relaxed(priv.base);
+	reg &= ~CPU_SW_INT_BLK;
+	writel_relaxed(reg, priv.base);
 
-		local_irq_enable();
-	}
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+	local_irq_enable();
 
 	return 0;
 }