Merge tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette/linux

Pull clk framework changes from Mike Turquette:
 "The first half of the clk framework pull request is made up almost
  entirely of new platform/driver support.  There are some conversions
  of existing drivers to the common-clock Device Tree binding, and a few
  non-critical fixes to the framework.

  Due to an entirely unnecessary cyclical dependency with the arm-soc
  tree this pull request is broken into two pieces.  The second piece
  will be sent out after arm-soc sends you the pull request that merged
  in core support for the HiSilicon 3620 platform.  That same pull
  request from arm-soc depends on this pull request to merge in those
  HiSilicon bits without causing build failures"

[ Just did the ARM SoC merges, so getting ready for the second clk tree
  pull request   - Linus ]

* tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette/linux: (97 commits)
  devicetree: bindings: Document qcom,mmcc
  devicetree: bindings: Document qcom,gcc
  clk: qcom: Add support for MSM8660's global clock controller (GCC)
  clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)
  clk: qcom: Add support for MSM8974's global clock controller (GCC)
  clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)
  clk: qcom: Add support for MSM8960's global clock controller (GCC)
  clk: qcom: Add reset controller support
  clk: qcom: Add support for branches/gate clocks
  clk: qcom: Add support for root clock generators (RCGs)
  clk: qcom: Add support for phase locked loops (PLLs)
  clk: qcom: Add a regmap type clock struct
  clk: Add set_rate_and_parent() op
  reset: Silence warning in reset-controller.h
  clk: sirf: re-arch to make the codes support both prima2 and atlas6
  clk: composite: pass mux_hw into determine_rate
  clk: shmobile: Fix MSTP clock array initialization
  clk: shmobile: Fix MSTP clock index
  ARM: dts: Add clock provider specific properties to max77686 node
  clk: max77686: Register OF clock provider
  ...

1 files changed, 114 insertions, 0 deletions

diff --git a/drivers/clk/qcom/clk-regmap.c b/drivers/clk/qcom/clk-regmap.c
new file mode 100644
index 000000000000..a58ba39a900c
--- /dev/null
+++ b/drivers/clk/qcom/clk-regmap.c
@@ -0,0 +1,114 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+#include <linux/export.h>
+
+#include "clk-regmap.h"
+
+/**
+ * clk_is_enabled_regmap - standard is_enabled() for regmap users
+ *
+ * @hw: clk to operate on
+ *
+ * Clocks that use regmap for their register I/O can set the
+ * enable_reg and enable_mask fields in their struct clk_regmap and then use
+ * this as their is_enabled operation, saving some code.
+ */
+int clk_is_enabled_regmap(struct clk_hw *hw)
+{
+	struct clk_regmap *rclk = to_clk_regmap(hw);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(rclk->regmap, rclk->enable_reg, &val);
+	if (ret != 0)
+		return ret;
+
+	if (rclk->enable_is_inverted)
+		return (val & rclk->enable_mask) == 0;
+	else
+		return (val & rclk->enable_mask) != 0;
+}
+EXPORT_SYMBOL_GPL(clk_is_enabled_regmap);
+
+/**
+ * clk_enable_regmap - standard enable() for regmap users
+ *
+ * @hw: clk to operate on
+ *
+ * Clocks that use regmap for their register I/O can set the
+ * enable_reg and enable_mask fields in their struct clk_regmap and then use
+ * this as their enable() operation, saving some code.
+ */
+int clk_enable_regmap(struct clk_hw *hw)
+{
+	struct clk_regmap *rclk = to_clk_regmap(hw);
+	unsigned int val;
+
+	if (rclk->enable_is_inverted)
+		val = 0;
+	else
+		val = rclk->enable_mask;
+
+	return regmap_update_bits(rclk->regmap, rclk->enable_reg,
+				  rclk->enable_mask, val);
+}
+EXPORT_SYMBOL_GPL(clk_enable_regmap);
+
+/**
+ * clk_disable_regmap - standard disable() for regmap users
+ *
+ * @hw: clk to operate on
+ *
+ * Clocks that use regmap for their register I/O can set the
+ * enable_reg and enable_mask fields in their struct clk_regmap and then use
+ * this as their disable() operation, saving some code.
+ */
+void clk_disable_regmap(struct clk_hw *hw)
+{
+	struct clk_regmap *rclk = to_clk_regmap(hw);
+	unsigned int val;
+
+	if (rclk->enable_is_inverted)
+		val = rclk->enable_mask;
+	else
+		val = 0;
+
+	regmap_update_bits(rclk->regmap, rclk->enable_reg, rclk->enable_mask,
+			   val);
+}
+EXPORT_SYMBOL_GPL(clk_disable_regmap);
+
+/**
+ * devm_clk_register_regmap - register a clk_regmap clock
+ *
+ * @rclk: clk to operate on
+ *
+ * Clocks that use regmap for their register I/O should register their
+ * clk_regmap struct via this function so that the regmap is initialized
+ * and so that the clock is registered with the common clock framework.
+ */
+struct clk *devm_clk_register_regmap(struct device *dev,
+				     struct clk_regmap *rclk)
+{
+	if (dev && dev_get_regmap(dev, NULL))
+		rclk->regmap = dev_get_regmap(dev, NULL);
+	else if (dev && dev->parent)
+		rclk->regmap = dev_get_regmap(dev->parent, NULL);
+
+	return devm_clk_register(dev, &rclk->hw);
+}
+EXPORT_SYMBOL_GPL(devm_clk_register_regmap);