Merge tag 'sound-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "It's been busy summer weeks and hence lots of changes, partly for a
  few new drivers and partly for a wide range of fixes.

  Here are highlights:

  ALSA Core:
   - Fix rawmidi buffer management, code cleanup / refactoring
   - Fix the SG-buffer page handling with incorrect fallback size
   - Fix the stall at virmidi trigger callback with a large buffer; also
     offloading and code-refactoring along with it
   - Various ALSA sequencer code cleanups

  ASoC:
   - Deploy the standard snd_pcm_stop_xrun() helper in several drivers
   - Support for providing name prefixes to generic component nodes
   - Quite a few fixes for DPCM as it gains a bit wider use and more
     robust testing
   - Generalization of the DIO2125 support to a simple amplifier driver
   - Accessory detection support for the audio graph card
   - DT support for PXA AC'97 devices
   - Quirks for a number of new x86 systems
   - Support for AM Logic Meson, Everest ES7154, Intel systems with
     RT5682, Qualcomm QDSP6 and WCD9335, Realtek RT5682 and TI TAS5707

  HD-audio:
   - Code refactoring in HD-audio ext codec codes to drop own classes;
     preliminary works for the upcoming legacy codec support
   - Generalized DRM audio component for the upcoming radeon / amdgpu
     support
   - Unification of mic mute-LED and GPIO support for various codecs
   - Further improvement of CA0132 codec support including Recon3D
   - Proper vga_switcheroo handling for AMD i-GPU
   - Update of model list in documentation
   - Fixups for another HP Spectre x360, Conexant codecs, power-save
     blacklist update

  USB-audio:
   - Fix the invalid sample rate setup with external clock
   - Support of UAC3 selector units and processing units
   - Basic UAC3 power-domain support
   - Support for Encore mDSD and Thesycon-based DSD devices
   - Preparation for future complete callback changes

  Firewire:
   - Add support for MOTU Traveler

  Misc:
   - The endianess notation fixes in various drivers
   - Add fall-through comment in lots of drivers
   - Various sparse warning fixes, e.g. about PCM format types"

* tag 'sound-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (529 commits)
  ASoC: adav80x: mark expected switch fall-through
  ASoC: da7219: Add delays to capture path to remove DC offset noise
  ALSA: usb-audio: Mark expected switch fall-through
  ALSA: mixart: Mark expected switch fall-through
  ALSA: opl3: Mark expected switch fall-through
  ALSA: hda/ca0132 - Add exit commands for Recon3D
  ALSA: hda/ca0132 - Change mixer controls for Recon3D
  ALSA: hda/ca0132 - Add Recon3D input and output select commands
  ALSA: hda/ca0132 - Add DSP setup defaults for Recon3D
  ALSA: hda/ca0132 - Add Recon3D startup functions and setup
  ALSA: hda/ca0132 - Add bool variable to enable/disable pci region2 mmio
  ALSA: hda/ca0132 - Add Recon3D pincfg
  ALSA: hda/ca0132 - Add quirk ID and enum for Recon3D
  ALSA: hda/ca0132 - Add alt_functions unsolicited response
  ALSA: hda/ca0132 - Clean up ca0132_init function.
  ALSA: hda/ca0132 - Create mmio gpio function to make code clearer
  ASoC: wm_adsp: Make DSP name configurable by codec driver
  ASoC: wm_adsp: Declare firmware controls from codec driver
  ASoC: max98373: Added software reset register to readable registers
  ASoC: wm_adsp: Correct DSP pointer for preloader control
  ...

1 files changed, 194 insertions, 5 deletions

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index e2ed078abd90..976f59e11f9a 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -67,6 +67,7 @@ struct clk_core {
 	unsigned long		max_rate;
 	unsigned long		accuracy;
 	int			phase;
+	struct clk_duty		duty;
 	struct hlist_head	children;
 	struct hlist_node	child_node;
 	struct hlist_head	clks;
@@ -2401,6 +2402,172 @@ int clk_get_phase(struct clk *clk)
 }
 EXPORT_SYMBOL_GPL(clk_get_phase);
 
+static void clk_core_reset_duty_cycle_nolock(struct clk_core *core)
+{
+	/* Assume a default value of 50% */
+	core->duty.num = 1;
+	core->duty.den = 2;
+}
+
+static int clk_core_update_duty_cycle_parent_nolock(struct clk_core *core);
+
+static int clk_core_update_duty_cycle_nolock(struct clk_core *core)
+{
+	struct clk_duty *duty = &core->duty;
+	int ret = 0;
+
+	if (!core->ops->get_duty_cycle)
+		return clk_core_update_duty_cycle_parent_nolock(core);
+
+	ret = core->ops->get_duty_cycle(core->hw, duty);
+	if (ret)
+		goto reset;
+
+	/* Don't trust the clock provider too much */
+	if (duty->den == 0 || duty->num > duty->den) {
+		ret = -EINVAL;
+		goto reset;
+	}
+
+	return 0;
+
+reset:
+	clk_core_reset_duty_cycle_nolock(core);
+	return ret;
+}
+
+static int clk_core_update_duty_cycle_parent_nolock(struct clk_core *core)
+{
+	int ret = 0;
+
+	if (core->parent &&
+	    core->flags & CLK_DUTY_CYCLE_PARENT) {
+		ret = clk_core_update_duty_cycle_nolock(core->parent);
+		memcpy(&core->duty, &core->parent->duty, sizeof(core->duty));
+	} else {
+		clk_core_reset_duty_cycle_nolock(core);
+	}
+
+	return ret;
+}
+
+static int clk_core_set_duty_cycle_parent_nolock(struct clk_core *core,
+						 struct clk_duty *duty);
+
+static int clk_core_set_duty_cycle_nolock(struct clk_core *core,
+					  struct clk_duty *duty)
+{
+	int ret;
+
+	lockdep_assert_held(&prepare_lock);
+
+	if (clk_core_rate_is_protected(core))
+		return -EBUSY;
+
+	trace_clk_set_duty_cycle(core, duty);
+
+	if (!core->ops->set_duty_cycle)
+		return clk_core_set_duty_cycle_parent_nolock(core, duty);
+
+	ret = core->ops->set_duty_cycle(core->hw, duty);
+	if (!ret)
+		memcpy(&core->duty, duty, sizeof(*duty));
+
+	trace_clk_set_duty_cycle_complete(core, duty);
+
+	return ret;
+}
+
+static int clk_core_set_duty_cycle_parent_nolock(struct clk_core *core,
+						 struct clk_duty *duty)
+{
+	int ret = 0;
+
+	if (core->parent &&
+	    core->flags & (CLK_DUTY_CYCLE_PARENT | CLK_SET_RATE_PARENT)) {
+		ret = clk_core_set_duty_cycle_nolock(core->parent, duty);
+		memcpy(&core->duty, &core->parent->duty, sizeof(core->duty));
+	}
+
+	return ret;
+}
+
+/**
+ * clk_set_duty_cycle - adjust the duty cycle ratio of a clock signal
+ * @clk: clock signal source
+ * @num: numerator of the duty cycle ratio to be applied
+ * @den: denominator of the duty cycle ratio to be applied
+ *
+ * Apply the duty cycle ratio if the ratio is valid and the clock can
+ * perform this operation
+ *
+ * Returns (0) on success, a negative errno otherwise.
+ */
+int clk_set_duty_cycle(struct clk *clk, unsigned int num, unsigned int den)
+{
+	int ret;
+	struct clk_duty duty;
+
+	if (!clk)
+		return 0;
+
+	/* sanity check the ratio */
+	if (den == 0 || num > den)
+		return -EINVAL;
+
+	duty.num = num;
+	duty.den = den;
+
+	clk_prepare_lock();
+
+	if (clk->exclusive_count)
+		clk_core_rate_unprotect(clk->core);
+
+	ret = clk_core_set_duty_cycle_nolock(clk->core, &duty);
+
+	if (clk->exclusive_count)
+		clk_core_rate_protect(clk->core);
+
+	clk_prepare_unlock();
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(clk_set_duty_cycle);
+
+static int clk_core_get_scaled_duty_cycle(struct clk_core *core,
+					  unsigned int scale)
+{
+	struct clk_duty *duty = &core->duty;
+	int ret;
+
+	clk_prepare_lock();
+
+	ret = clk_core_update_duty_cycle_nolock(core);
+	if (!ret)
+		ret = mult_frac(scale, duty->num, duty->den);
+
+	clk_prepare_unlock();
+
+	return ret;
+}
+
+/**
+ * clk_get_scaled_duty_cycle - return the duty cycle ratio of a clock signal
+ * @clk: clock signal source
+ * @scale: scaling factor to be applied to represent the ratio as an integer
+ *
+ * Returns the duty cycle ratio of a clock node multiplied by the provided
+ * scaling factor, or negative errno on error.
+ */
+int clk_get_scaled_duty_cycle(struct clk *clk, unsigned int scale)
+{
+	if (!clk)
+		return 0;
+
+	return clk_core_get_scaled_duty_cycle(clk->core, scale);
+}
+EXPORT_SYMBOL_GPL(clk_get_scaled_duty_cycle);
+
 /**
  * clk_is_match - check if two clk's point to the same hardware clock
  * @p: clk compared against q
@@ -2454,12 +2621,13 @@ static void clk_summary_show_one(struct seq_file *s, struct clk_core *c,
 	if (!c)
 		return;
 
-	seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu %-3d\n",
+	seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu %5d %6d\n",
 		   level * 3 + 1, "",
 		   30 - level * 3, c->name,
 		   c->enable_count, c->prepare_count, c->protect_count,
 		   clk_core_get_rate(c), clk_core_get_accuracy(c),
-		   clk_core_get_phase(c));
+		   clk_core_get_phase(c),
+		   clk_core_get_scaled_duty_cycle(c, 100000));
 }
 
 static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c,
@@ -2481,9 +2649,9 @@ static int clk_summary_show(struct seq_file *s, void *data)
 	struct clk_core *c;
 	struct hlist_head **lists = (struct hlist_head **)s->private;
 
-	seq_puts(s, "                                 enable  prepare  protect                               \n");
-	seq_puts(s, "   clock                          count    count    count        rate   accuracy   phase\n");
-	seq_puts(s, "----------------------------------------------------------------------------------------\n");
+	seq_puts(s, "                                 enable  prepare  protect                                duty\n");
+	seq_puts(s, "   clock                          count    count    count        rate   accuracy phase  cycle\n");
+	seq_puts(s, "---------------------------------------------------------------------------------------------\n");
 
 	clk_prepare_lock();
 
@@ -2510,6 +2678,8 @@ static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level)
 	seq_printf(s, "\"rate\": %lu,", clk_core_get_rate(c));
 	seq_printf(s, "\"accuracy\": %lu,", clk_core_get_accuracy(c));
 	seq_printf(s, "\"phase\": %d", clk_core_get_phase(c));
+	seq_printf(s, "\"duty_cycle\": %u",
+		   clk_core_get_scaled_duty_cycle(c, 100000));
 }
 
 static void clk_dump_subtree(struct seq_file *s, struct clk_core *c, int level)
@@ -2571,6 +2741,7 @@ static const struct {
 	ENTRY(CLK_SET_RATE_UNGATE),
 	ENTRY(CLK_IS_CRITICAL),
 	ENTRY(CLK_OPS_PARENT_ENABLE),
+	ENTRY(CLK_DUTY_CYCLE_PARENT),
 #undef ENTRY
 };
 
@@ -2609,6 +2780,17 @@ static int possible_parents_show(struct seq_file *s, void *data)
 }
 DEFINE_SHOW_ATTRIBUTE(possible_parents);
 
+static int clk_duty_cycle_show(struct seq_file *s, void *data)
+{
+	struct clk_core *core = s->private;
+	struct clk_duty *duty = &core->duty;
+
+	seq_printf(s, "%u/%u\n", duty->num, duty->den);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(clk_duty_cycle);
+
 static void clk_debug_create_one(struct clk_core *core, struct dentry *pdentry)
 {
 	struct dentry *root;
@@ -2627,6 +2809,8 @@ static void clk_debug_create_one(struct clk_core *core, struct dentry *pdentry)
 	debugfs_create_u32("clk_enable_count", 0444, root, &core->enable_count);
 	debugfs_create_u32("clk_protect_count", 0444, root, &core->protect_count);
 	debugfs_create_u32("clk_notifier_count", 0444, root, &core->notifier_count);
+	debugfs_create_file("clk_duty_cycle", 0444, root, core,
+			    &clk_duty_cycle_fops);
 
 	if (core->num_parents > 1)
 		debugfs_create_file("clk_possible_parents", 0444, root, core,
@@ -2845,6 +3029,11 @@ static int __clk_core_init(struct clk_core *core)
 		core->phase = 0;
 
 	/*
+	 * Set clk's duty cycle.
+	 */
+	clk_core_update_duty_cycle_nolock(core);
+
+	/*
 	 * Set clk's rate.  The preferred method is to use .recalc_rate.  For
 	 * simple clocks and lazy developers the default fallback is to use the
 	 * parent's rate.  If a clock doesn't have a parent (or is orphaned)