bus: mhi: core: Add support for Flash Programmer execution environment

MHI WWAN modems support downloading firmware to NAND or eMMC
using Firehose protocol with process as follows:
1. Modem boots up, enters AMSS execution environment and the
device later enters EDL (Emergency Download) mode through any
mechanism host can use such as a diag command.
2. Modem enters SYS_ERROR, MHI host handles SYS_ERROR transition.
3. EDL image for device to enter 'Flash Programmer' execution
environment is then flashed via BHI interface from host.
4. Modem enters MHI READY -> M0 and sends the Flash Programmer
execution environment change to host.
5. Following that, EDL/FIREHOSE channels (34, 35) are made
available from the host.
6. User space tool for downloading firmware image to modem over
the EDL channels using Firehose protocol. Link to USB flashing
tool: https://git.linaro.org/landing-teams/working/qualcomm/qdl.git/

Make the necessary changes to allow for this sequence to occur and
allow using the Flash Programmer execution environment.

Signed-off-by: Carl Yin <carl.yin@quectel.com>
Co-developed-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1617067704-28850-5-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

4 files changed, 12 insertions, 0 deletions

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index 706484ffe169..ee67712f66c0 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -29,6 +29,7 @@ const char * const mhi_ee_str[MHI_EE_MAX] = {
 	[MHI_EE_WFW] = "WFW",
 	[MHI_EE_PTHRU] = "PASS THRU",
 	[MHI_EE_EDL] = "EDL",
+	[MHI_EE_FP] = "FLASH PROGRAMMER",
 	[MHI_EE_DISABLE_TRANSITION] = "DISABLE",
 	[MHI_EE_NOT_SUPPORTED] = "NOT SUPPORTED",
 };
@@ -38,6 +39,7 @@ const char * const dev_state_tran_str[DEV_ST_TRANSITION_MAX] = {
 	[DEV_ST_TRANSITION_READY] = "READY",
 	[DEV_ST_TRANSITION_SBL] = "SBL",
 	[DEV_ST_TRANSITION_MISSION_MODE] = "MISSION_MODE",
+	[DEV_ST_TRANSITION_FP] = "FLASH_PROGRAMMER",
 	[DEV_ST_TRANSITION_SYS_ERR] = "SYS_ERR",
 	[DEV_ST_TRANSITION_DISABLE] = "DISABLE",
 };
diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
index 6f37439e5247..b1b5f2b82393 100644
--- a/drivers/bus/mhi/core/internal.h
+++ b/drivers/bus/mhi/core/internal.h
@@ -386,6 +386,7 @@ enum dev_st_transition {
 	DEV_ST_TRANSITION_READY,
 	DEV_ST_TRANSITION_SBL,
 	DEV_ST_TRANSITION_MISSION_MODE,
+	DEV_ST_TRANSITION_FP,
 	DEV_ST_TRANSITION_SYS_ERR,
 	DEV_ST_TRANSITION_DISABLE,
 	DEV_ST_TRANSITION_MAX,
diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index d377d07f269e..8b68657c76c3 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -831,6 +831,9 @@ int mhi_process_ctrl_ev_ring(struct mhi_controller *mhi_cntrl,
 			case MHI_EE_AMSS:
 				st = DEV_ST_TRANSITION_MISSION_MODE;
 				break;
+			case MHI_EE_FP:
+				st = DEV_ST_TRANSITION_FP;
+				break;
 			case MHI_EE_RDDM:
 				mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_EE_RDDM);
 				write_lock_irq(&mhi_cntrl->pm_lock);
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index b65222eda5e6..7ac9dfe54895 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -782,6 +782,12 @@ void mhi_pm_st_worker(struct work_struct *work)
 		case DEV_ST_TRANSITION_MISSION_MODE:
 			mhi_pm_mission_mode_transition(mhi_cntrl);
 			break;
+		case DEV_ST_TRANSITION_FP:
+			write_lock_irq(&mhi_cntrl->pm_lock);
+			mhi_cntrl->ee = MHI_EE_FP;
+			write_unlock_irq(&mhi_cntrl->pm_lock);
+			mhi_create_devices(mhi_cntrl);
+			break;
 		case DEV_ST_TRANSITION_READY:
 			mhi_ready_state_transition(mhi_cntrl);
 			break;