Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

This merge resolves conflicts with 75aec9df3a78 ("bridge: Remove
br_nf_push_frag_xmit_sk") as part of Eric Biederman's effort to improve
netns support in the network stack that reached upstream via David's
net-next tree.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Conflicts:
	net/bridge/br_netfilter_hooks.c

1 files changed, 185 insertions, 54 deletions

diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index f30654149c63..645e66e9a945 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -32,6 +32,8 @@
 #include <linux/gpio/consumer.h>
 #include <linux/tty.h>
 #include <linux/interrupt.h>
+#include <linux/dmi.h>
+#include <linux/pm_runtime.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
@@ -39,6 +41,11 @@
 #include "btbcm.h"
 #include "hci_uart.h"
 
+#define BCM_LM_DIAG_PKT 0x07
+#define BCM_LM_DIAG_SIZE 63
+
+#define BCM_AUTOSUSPEND_DELAY	5000 /* default autosleep delay */
+
 struct bcm_device {
 	struct list_head	list;
 
@@ -55,7 +62,7 @@ struct bcm_device {
 	int			irq;
 	u8			irq_polarity;
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
 	struct hci_uart		*hu;
 	bool			is_suspended; /* suspend/resume flag */
 #endif
@@ -152,13 +159,17 @@ static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
 static irqreturn_t bcm_host_wake(int irq, void *data)
 {
 	struct bcm_device *bdev = data;
 
 	bt_dev_dbg(bdev, "Host wake IRQ");
 
+	pm_runtime_get(&bdev->pdev->dev);
+	pm_runtime_mark_last_busy(&bdev->pdev->dev);
+	pm_runtime_put_autosuspend(&bdev->pdev->dev);
+
 	return IRQ_HANDLED;
 }
 
@@ -182,6 +193,12 @@ static int bcm_request_irq(struct bcm_data *bcm)
 			goto unlock;
 
 		device_init_wakeup(&bdev->pdev->dev, true);
+
+		pm_runtime_set_autosuspend_delay(&bdev->pdev->dev,
+						 BCM_AUTOSUSPEND_DELAY);
+		pm_runtime_use_autosuspend(&bdev->pdev->dev);
+		pm_runtime_set_active(&bdev->pdev->dev);
+		pm_runtime_enable(&bdev->pdev->dev);
 	}
 
 unlock:
@@ -197,7 +214,7 @@ static const struct bcm_set_sleep_mode default_sleep_params = {
 	.bt_wake_active = 1,	/* BT_WAKE active mode: 1 = high, 0 = low */
 	.host_wake_active = 0,	/* HOST_WAKE active mode: 1 = high, 0 = low */
 	.allow_host_sleep = 1,	/* Allow host sleep in SCO flag */
-	.combine_modes = 0,	/* Combine sleep and LPM flag */
+	.combine_modes = 1,	/* Combine sleep and LPM flag */
 	.tristate_control = 0,	/* Allow tri-state control of UART tx flag */
 	/* Irrelevant USB flags */
 	.usb_auto_sleep = 0,
@@ -232,6 +249,29 @@ static inline int bcm_request_irq(struct bcm_data *bcm) { return 0; }
 static inline int bcm_setup_sleep(struct hci_uart *hu) { return 0; }
 #endif
 
+static int bcm_set_diag(struct hci_dev *hdev, bool enable)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct bcm_data *bcm = hu->priv;
+	struct sk_buff *skb;
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		return -ENETDOWN;
+
+	skb = bt_skb_alloc(3, GFP_KERNEL);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	*skb_put(skb, 1) = BCM_LM_DIAG_PKT;
+	*skb_put(skb, 1) = 0xf0;
+	*skb_put(skb, 1) = enable;
+
+	skb_queue_tail(&bcm->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	return 0;
+}
+
 static int bcm_open(struct hci_uart *hu)
 {
 	struct bcm_data *bcm;
@@ -258,7 +298,7 @@ static int bcm_open(struct hci_uart *hu)
 		if (hu->tty->dev->parent == dev->pdev->dev.parent) {
 			bcm->dev = dev;
 			hu->init_speed = dev->init_speed;
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
 			dev->hu = hu;
 #endif
 			bcm_gpio_set_power(bcm->dev, true);
@@ -282,7 +322,10 @@ static int bcm_close(struct hci_uart *hu)
 	mutex_lock(&bcm_device_lock);
 	if (bcm_device_exists(bdev)) {
 		bcm_gpio_set_power(bdev, false);
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
+		pm_runtime_disable(&bdev->pdev->dev);
+		pm_runtime_set_suspended(&bdev->pdev->dev);
+
 		if (device_can_wakeup(&bdev->pdev->dev)) {
 			devm_free_irq(&bdev->pdev->dev, bdev->irq, bdev);
 			device_init_wakeup(&bdev->pdev->dev, false);
@@ -322,6 +365,7 @@ static int bcm_setup(struct hci_uart *hu)
 
 	bt_dev_dbg(hu->hdev, "hu %p", hu);
 
+	hu->hdev->set_diag = bcm_set_diag;
 	hu->hdev->set_bdaddr = btbcm_set_bdaddr;
 
 	err = btbcm_initialize(hu->hdev, fw_name, sizeof(fw_name));
@@ -379,10 +423,18 @@ finalize:
 	return err;
 }
 
+#define BCM_RECV_LM_DIAG \
+	.type = BCM_LM_DIAG_PKT, \
+	.hlen = BCM_LM_DIAG_SIZE, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = BCM_LM_DIAG_SIZE
+
 static const struct h4_recv_pkt bcm_recv_pkts[] = {
-	{ H4_RECV_ACL,   .recv = hci_recv_frame },
-	{ H4_RECV_SCO,   .recv = hci_recv_frame },
-	{ H4_RECV_EVENT, .recv = hci_recv_frame },
+	{ H4_RECV_ACL,      .recv = hci_recv_frame },
+	{ H4_RECV_SCO,      .recv = hci_recv_frame },
+	{ H4_RECV_EVENT,    .recv = hci_recv_frame },
+	{ BCM_RECV_LM_DIAG, .recv = hci_recv_diag  },
 };
 
 static int bcm_recv(struct hci_uart *hu, const void *data, int count)
@@ -399,6 +451,15 @@ static int bcm_recv(struct hci_uart *hu, const void *data, int count)
 		bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
 		bcm->rx_skb = NULL;
 		return err;
+	} else if (!bcm->rx_skb) {
+		/* Delay auto-suspend when receiving completed packet */
+		mutex_lock(&bcm_device_lock);
+		if (bcm->dev && bcm_device_exists(bcm->dev)) {
+			pm_runtime_get(&bcm->dev->pdev->dev);
+			pm_runtime_mark_last_busy(&bcm->dev->pdev->dev);
+			pm_runtime_put_autosuspend(&bcm->dev->pdev->dev);
+		}
+		mutex_unlock(&bcm_device_lock);
 	}
 
 	return count;
@@ -420,28 +481,40 @@ static int bcm_enqueue(struct hci_uart *hu, struct sk_buff *skb)
 static struct sk_buff *bcm_dequeue(struct hci_uart *hu)
 {
 	struct bcm_data *bcm = hu->priv;
+	struct sk_buff *skb = NULL;
+	struct bcm_device *bdev = NULL;
+
+	mutex_lock(&bcm_device_lock);
+
+	if (bcm_device_exists(bcm->dev)) {
+		bdev = bcm->dev;
+		pm_runtime_get_sync(&bdev->pdev->dev);
+		/* Shall be resumed here */
+	}
+
+	skb = skb_dequeue(&bcm->txq);
+
+	if (bdev) {
+		pm_runtime_mark_last_busy(&bdev->pdev->dev);
+		pm_runtime_put_autosuspend(&bdev->pdev->dev);
+	}
 
-	return skb_dequeue(&bcm->txq);
+	mutex_unlock(&bcm_device_lock);
+
+	return skb;
 }
 
-#ifdef CONFIG_PM_SLEEP
-/* Platform suspend callback */
-static int bcm_suspend(struct device *dev)
+#ifdef CONFIG_PM
+static int bcm_suspend_device(struct device *dev)
 {
 	struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
-	int error;
-
-	bt_dev_dbg(bdev, "suspend: is_suspended %d", bdev->is_suspended);
-
-	mutex_lock(&bcm_device_lock);
 
-	if (!bdev->hu)
-		goto unlock;
+	bt_dev_dbg(bdev, "");
 
-	if (!bdev->is_suspended) {
+	if (!bdev->is_suspended && bdev->hu) {
 		hci_uart_set_flow_control(bdev->hu, true);
 
-		/* Once this callback returns, driver suspends BT via GPIO */
+		/* Once this returns, driver suspends BT via GPIO */
 		bdev->is_suspended = true;
 	}
 
@@ -452,6 +525,53 @@ static int bcm_suspend(struct device *dev)
 		mdelay(15);
 	}
 
+	return 0;
+}
+
+static int bcm_resume_device(struct device *dev)
+{
+	struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
+
+	bt_dev_dbg(bdev, "");
+
+	if (bdev->device_wakeup) {
+		gpiod_set_value(bdev->device_wakeup, true);
+		bt_dev_dbg(bdev, "resume, delaying 15 ms");
+		mdelay(15);
+	}
+
+	/* When this executes, the device has woken up already */
+	if (bdev->is_suspended && bdev->hu) {
+		bdev->is_suspended = false;
+
+		hci_uart_set_flow_control(bdev->hu, false);
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+/* Platform suspend callback */
+static int bcm_suspend(struct device *dev)
+{
+	struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
+	int error;
+
+	bt_dev_dbg(bdev, "suspend: is_suspended %d", bdev->is_suspended);
+
+	/* bcm_suspend can be called at any time as long as platform device is
+	 * bound, so it should use bcm_device_lock to protect access to hci_uart
+	 * and device_wake-up GPIO.
+	 */
+	mutex_lock(&bcm_device_lock);
+
+	if (!bdev->hu)
+		goto unlock;
+
+	if (pm_runtime_active(dev))
+		bcm_suspend_device(dev);
+
 	if (device_may_wakeup(&bdev->pdev->dev)) {
 		error = enable_irq_wake(bdev->irq);
 		if (!error)
@@ -471,6 +591,10 @@ static int bcm_resume(struct device *dev)
 
 	bt_dev_dbg(bdev, "resume: is_suspended %d", bdev->is_suspended);
 
+	/* bcm_resume can be called at any time as long as platform device is
+	 * bound, so it should use bcm_device_lock to protect access to hci_uart
+	 * and device_wake-up GPIO.
+	 */
 	mutex_lock(&bcm_device_lock);
 
 	if (!bdev->hu)
@@ -481,22 +605,15 @@ static int bcm_resume(struct device *dev)
 		bt_dev_dbg(bdev, "BCM irq: disabled");
 	}
 
-	if (bdev->device_wakeup) {
-		gpiod_set_value(bdev->device_wakeup, true);
-		bt_dev_dbg(bdev, "resume, delaying 15 ms");
-		mdelay(15);
-	}
-
-	/* When this callback executes, the device has woken up already */
-	if (bdev->is_suspended) {
-		bdev->is_suspended = false;
-
-		hci_uart_set_flow_control(bdev->hu, false);
-	}
+	bcm_resume_device(dev);
 
 unlock:
 	mutex_unlock(&bcm_device_lock);
 
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
 	return 0;
 }
 #endif
@@ -513,6 +630,22 @@ static const struct acpi_gpio_mapping acpi_bcm_default_gpios[] = {
 };
 
 #ifdef CONFIG_ACPI
+static u8 acpi_active_low = ACPI_ACTIVE_LOW;
+
+/* IRQ polarity of some chipsets are not defined correctly in ACPI table. */
+static const struct dmi_system_id bcm_wrong_irq_dmi_table[] = {
+	{
+		.ident = "Asus T100TA",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR,
+					"ASUSTeK COMPUTER INC."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"),
+		},
+		.driver_data = &acpi_active_low,
+	},
+	{ }
+};
+
 static int bcm_resource(struct acpi_resource *ares, void *data)
 {
 	struct bcm_device *dev = data;
@@ -549,15 +682,10 @@ static int bcm_resource(struct acpi_resource *ares, void *data)
 static int bcm_acpi_probe(struct bcm_device *dev)
 {
 	struct platform_device *pdev = dev->pdev;
-	const struct acpi_device_id *id;
-	struct acpi_device *adev;
 	LIST_HEAD(resources);
+	const struct dmi_system_id *dmi_id;
 	int ret;
 
-	id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
-	if (!id)
-		return -ENODEV;
-
 	/* Retrieve GPIO data */
 	dev->name = dev_name(&pdev->dev);
 	ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
@@ -602,11 +730,18 @@ static int bcm_acpi_probe(struct bcm_device *dev)
 	}
 
 	/* Retrieve UART ACPI info */
-	adev = ACPI_COMPANION(&dev->pdev->dev);
-	if (!adev)
-		return 0;
+	ret = acpi_dev_get_resources(ACPI_COMPANION(&dev->pdev->dev),
+				     &resources, bcm_resource, dev);
+	if (ret < 0)
+		return ret;
+	acpi_dev_free_resource_list(&resources);
 
-	acpi_dev_get_resources(adev, &resources, bcm_resource, dev);
+	dmi_id = dmi_first_match(bcm_wrong_irq_dmi_table);
+	if (dmi_id) {
+		bt_dev_warn(dev, "%s: Overwriting IRQ polarity to active low",
+			    dmi_id->ident);
+		dev->irq_polarity = *(u8 *)dmi_id->driver_data;
+	}
 
 	return 0;
 }
@@ -620,7 +755,6 @@ static int bcm_acpi_probe(struct bcm_device *dev)
 static int bcm_probe(struct platform_device *pdev)
 {
 	struct bcm_device *dev;
-	struct acpi_device_id *pdata = pdev->dev.platform_data;
 	int ret;
 
 	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
@@ -629,15 +763,9 @@ static int bcm_probe(struct platform_device *pdev)
 
 	dev->pdev = pdev;
 
-	if (ACPI_HANDLE(&pdev->dev)) {
-		ret = bcm_acpi_probe(dev);
-		if (ret)
-			return ret;
-	} else if (pdata) {
-		dev->name = pdata->id;
-	} else {
-		return -ENODEV;
-	}
+	ret = bcm_acpi_probe(dev);
+	if (ret)
+		return ret;
 
 	platform_set_drvdata(pdev, dev);
 
@@ -693,7 +821,10 @@ MODULE_DEVICE_TABLE(acpi, bcm_acpi_match);
 #endif
 
 /* Platform suspend and resume callbacks */
-static SIMPLE_DEV_PM_OPS(bcm_pm_ops, bcm_suspend, bcm_resume);
+static const struct dev_pm_ops bcm_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(bcm_suspend, bcm_resume)
+	SET_RUNTIME_PM_OPS(bcm_suspend_device, bcm_resume_device, NULL)
+};
 
 static struct platform_driver bcm_driver = {
 	.probe = bcm_probe,