summaryrefslogtreecommitdiff
path: root/arch/x86/xen
diff options
context:
space:
mode:
authorThomas Gleixner <tglx@linutronix.de>2017-09-14 00:29:42 +0300
committerThomas Gleixner <tglx@linutronix.de>2017-09-25 21:51:58 +0300
commit69cde0004a4b5cfc7d1cec4ef9ce4cf4e26142f0 (patch)
tree010f3842b54516575564200ac451f22c0ae8c87b /arch/x86/xen
parent8d1e3dca7de6e8513872799a748a1d47d8dce60d (diff)
downloadlinux-69cde0004a4b5cfc7d1cec4ef9ce4cf4e26142f0.tar.xz
x86/vector: Use matrix allocator for vector assignment
Replace the magic vector allocation code by a simple bitmap matrix allocator. This avoids loops and hoops over CPUs and vector arrays, so in case of densly used vector spaces it's way faster. This also gets rid of the magic 'spread the vectors accross priority levels' heuristics in the current allocator: The comment in __asign_irq_vector says: * NOTE! The local APIC isn't very good at handling * multiple interrupts at the same interrupt level. * As the interrupt level is determined by taking the * vector number and shifting that right by 4, we * want to spread these out a bit so that they don't * all fall in the same interrupt level. After doing some palaeontological research the following was found the following in the PPro Developer Manual Volume 3: "7.4.2. Valid Interrupts The local and I/O APICs support 240 distinct vectors in the range of 16 to 255. Interrupt priority is implied by its vector, according to the following relationship: priority = vector / 16 One is the lowest priority and 15 is the highest. Vectors 16 through 31 are reserved for exclusive use by the processor. The remaining vectors are for general use. The processor's local APIC includes an in-service entry and a holding entry for each priority level. To avoid losing inter- rupts, software should allocate no more than 2 interrupt vectors per priority." The current SDM tells nothing about that, instead it states: "If more than one interrupt is generated with the same vector number, the local APIC can set the bit for the vector both in the IRR and the ISR. This means that for the Pentium 4 and Intel Xeon processors, the IRR and ISR can queue two interrupts for each interrupt vector: one in the IRR and one in the ISR. Any additional interrupts issued for the same interrupt vector are collapsed into the single bit in the IRR. For the P6 family and Pentium processors, the IRR and ISR registers can queue no more than two interrupts per interrupt vector and will reject other interrupts that are received within the same vector." Which means, that on P6/Pentium the APIC will reject a new message and tell the sender to retry, which increases the load on the APIC bus and nothing more. There is no affirmative answer from Intel on that, but it's a sane approach to remove that for the following reasons: 1) No other (relevant Open Source) operating systems bothers to implement this or mentiones this at all. 2) The current allocator has no enforcement for this and especially the legacy interrupts, which are the main source of interrupts on these P6 and older systmes, are allocated linearly in the same priority level and just work. 3) The current machines have no problem with that at all as verified with some experiments. 4) AMD at least confirmed that such an issue is unknown. 5) P6 and older are dinosaurs almost 20 years EOL, so there is really no reason to worry about that too much. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213155.443678104@linutronix.de
Diffstat (limited to 'arch/x86/xen')
0 files changed, 0 insertions, 0 deletions