x86: Fix common misspellings

They were generated by 'codespell' and then manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: trivial@kernel.org
LKML-Reference: <1300389856-1099-3-git-send-email-lucas.demarchi@profusion.mobi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

25 files changed, 35 insertions, 35 deletions

diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 4db35544de73..4a234677e213 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -199,7 +199,7 @@ void *text_poke_early(void *addr, const void *opcode, size_t len);
 
 /* Replace instructions with better alternatives for this CPU type.
    This runs before SMP is initialized to avoid SMP problems with
-   self modifying code. This implies that assymetric systems where
+   self modifying code. This implies that asymmetric systems where
    APs have less capabilities than the boot processor are not handled.
    Tough. Make sure you disable such features by hand. */
 
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 7b1e8e10b89c..86d1ad4962a7 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -73,7 +73,7 @@ static u32 __init allocate_aperture(void)
 	/*
 	 * using 512M as goal, in case kexec will load kernel_big
 	 * that will do the on position decompress, and  could overlap with
-	 * that positon with gart that is used.
+	 * that position with gart that is used.
 	 * sequende:
 	 * kernel_small
 	 * ==> kexec (with kdump trigger path or previous doesn't shutdown gart)
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 4b5ebd26f565..f15c6f76071c 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1886,7 +1886,7 @@ void disable_IO_APIC(void)
 	 *
 	 * With interrupt-remapping, for now we will use virtual wire A mode,
 	 * as virtual wire B is little complex (need to configure both
-	 * IOAPIC RTE aswell as interrupt-remapping table entry).
+	 * IOAPIC RTE as well as interrupt-remapping table entry).
 	 * As this gets called during crash dump, keep this simple for now.
 	 */
 	if (ioapic_i8259.pin != -1 && !intr_remapping_enabled) {
@@ -2905,7 +2905,7 @@ void __init setup_IO_APIC(void)
 }
 
 /*
- *      Called after all the initialization is done. If we didnt find any
+ *      Called after all the initialization is done. If we didn't find any
  *      APIC bugs then we can allow the modify fast path
  */
 
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 0e4f24c2a746..a10e516dd78d 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -66,7 +66,7 @@
  *    1.5: Fix segment register reloading (in case of bad segments saved
  *         across BIOS call).
  *         Stephen Rothwell
- *    1.6: Cope with complier/assembler differences.
+ *    1.6: Cope with compiler/assembler differences.
  *         Only try to turn off the first display device.
  *         Fix OOPS at power off with no APM BIOS by Jan Echternach
  *                   <echter@informatik.uni-rostock.de>
diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c
index 03162dac6271..cf48cdd6907d 100644
--- a/arch/x86/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c
@@ -444,7 +444,7 @@ static int __cpuinit longhaul_get_ranges(void)
 		return -EINVAL;
 	}
 	/* Get max multiplier - as we always did.
-	 * Longhaul MSR is usefull only when voltage scaling is enabled.
+	 * Longhaul MSR is useful only when voltage scaling is enabled.
 	 * C3 is booting at max anyway. */
 	maxmult = mult;
 	/* Get min multiplier */
@@ -1011,7 +1011,7 @@ static void __exit longhaul_exit(void)
  * trigger frequency transition in some cases. */
 module_param(disable_acpi_c3, int, 0644);
 MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support");
-/* Change CPU voltage with frequency. Very usefull to save
+/* Change CPU voltage with frequency. Very useful to save
  * power, but most VIA C3 processors aren't supporting it. */
 module_param(scale_voltage, int, 0644);
 MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index c567dec854f6..b41f7da4555b 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -1276,7 +1276,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 
 	if (powernow_k8_cpu_init_acpi(data)) {
 		/*
-		 * Use the PSB BIOS structure. This is only availabe on
+		 * Use the PSB BIOS structure. This is only available on
 		 * an UP version, and is deprecated by AMD.
 		 */
 		if (num_online_cpus() != 1) {
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
index 8abd869baabf..91bc25b67bc1 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
@@ -292,7 +292,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 
 	result = speedstep_smi_ownership();
 	if (result) {
-		dprintk("fails in aquiring ownership of a SMI interface.\n");
+		dprintk("fails in acquiring ownership of a SMI interface.\n");
 		return -EINVAL;
 	}
 
@@ -360,7 +360,7 @@ static int speedstep_resume(struct cpufreq_policy *policy)
 	int result = speedstep_smi_ownership();
 
 	if (result)
-		dprintk("fails in re-aquiring ownership of a SMI interface.\n");
+		dprintk("fails in re-acquiring ownership of a SMI interface.\n");
 
 	return result;
 }
diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
index a77971979564..0ed633c5048b 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-inject.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -32,7 +32,7 @@ static void inject_mce(struct mce *m)
 {
 	struct mce *i = &per_cpu(injectm, m->extcpu);
 
-	/* Make sure noone reads partially written injectm */
+	/* Make sure no one reads partially written injectm */
 	i->finished = 0;
 	mb();
 	m->finished = 0;
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index d916183b7f9c..ab1122998dba 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -881,7 +881,7 @@ reset:
  * Check if the address reported by the CPU is in a format we can parse.
  * It would be possible to add code for most other cases, but all would
  * be somewhat complicated (e.g. segment offset would require an instruction
- * parser). So only support physical addresses upto page granuality for now.
+ * parser). So only support physical addresses up to page granuality for now.
  */
 static int mce_usable_address(struct mce *m)
 {
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 9f27228ceffd..a71efcdbb092 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -1,6 +1,6 @@
 /*
  * This only handles 32bit MTRR on 32bit hosts. This is strictly wrong
- * because MTRRs can span upto 40 bits (36bits on most modern x86)
+ * because MTRRs can span up to 40 bits (36bits on most modern x86)
  */
 #define DEBUG
 
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 26604188aa49..279bc9de1cc7 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -1111,7 +1111,7 @@ static int x86_pmu_add(struct perf_event *event, int flags)
 
 	/*
 	 * If group events scheduling transaction was started,
-	 * skip the schedulability test here, it will be peformed
+	 * skip the schedulability test here, it will be performed
 	 * at commit time (->commit_txn) as a whole
 	 */
 	if (cpuc->group_flag & PERF_EVENT_TXN)
diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c
index 3769ac822f96..0811f5ebfba6 100644
--- a/arch/x86/kernel/cpu/perf_event_p4.c
+++ b/arch/x86/kernel/cpu/perf_event_p4.c
@@ -1,5 +1,5 @@
 /*
- * Netburst Perfomance Events (P4, old Xeon)
+ * Netburst Performance Events (P4, old Xeon)
  *
  *  Copyright (C) 2010 Parallels, Inc., Cyrill Gorcunov <gorcunov@openvz.org>
  *  Copyright (C) 2010 Intel Corporation, Lin Ming <ming.m.lin@intel.com>
@@ -679,7 +679,7 @@ static int p4_validate_raw_event(struct perf_event *event)
 	 */
 
 	/*
-	 * if an event is shared accross the logical threads
+	 * if an event is shared across the logical threads
 	 * the user needs special permissions to be able to use it
 	 */
 	if (p4_ht_active() && p4_event_bind_map[v].shared) {
@@ -790,13 +790,13 @@ static void p4_pmu_disable_pebs(void)
 	 *
 	 * It's still allowed that two threads setup same cache
 	 * events so we can't simply clear metrics until we knew
-	 * noone is depending on us, so we need kind of counter
+	 * no one is depending on us, so we need kind of counter
 	 * for "ReplayEvent" users.
 	 *
 	 * What is more complex -- RAW events, if user (for some
 	 * reason) will pass some cache event metric with improper
 	 * event opcode -- it's fine from hardware point of view
-	 * but completely nonsence from "meaning" of such action.
+	 * but completely nonsense from "meaning" of such action.
 	 *
 	 * So at moment let leave metrics turned on forever -- it's
 	 * ok for now but need to be revisited!
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 227b0448960d..d22d0c4edcfd 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -86,7 +86,7 @@ static void __init vmware_platform_setup(void)
 }
 
 /*
- * While checking the dmi string infomation, just checking the product
+ * While checking the dmi string information, just checking the product
  * serial key should be enough, as this will always have a VMware
  * specific string when running under VMware hypervisor.
  */
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index b72b4a6466a9..8a445a0c989e 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -18,7 +18,7 @@
  * A note on terminology:
  * - top of stack: Architecture defined interrupt frame from SS to RIP
  * at the top of the kernel process stack.
- * - partial stack frame: partially saved registers upto R11.
+ * - partial stack frame: partially saved registers up to R11.
  * - full stack frame: Like partial stack frame, but all register saved.
  *
  * Some macro usage:
@@ -422,7 +422,7 @@ ENTRY(ret_from_fork)
 END(ret_from_fork)
 
 /*
- * System call entry. Upto 6 arguments in registers are supported.
+ * System call entry. Up to 6 arguments in registers are supported.
  *
  * SYSCALL does not save anything on the stack and does not change the
  * stack pointer.
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index e60c38cc0eed..12aff2537682 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -145,7 +145,7 @@ EXPORT_SYMBOL_GPL(fpu_finit);
  * The _current_ task is using the FPU for the first time
  * so initialize it and set the mxcsr to its default
  * value at reset if we support XMM instructions and then
- * remeber the current task has used the FPU.
+ * remember the current task has used the FPU.
  */
 int init_fpu(struct task_struct *tsk)
 {
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 9974d21048fd..72090705a656 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -172,7 +172,7 @@ asmlinkage void do_softirq(void)
 
 		call_on_stack(__do_softirq, isp);
 		/*
-		 * Shouldnt happen, we returned above if in_interrupt():
+		 * Shouldn't happen, we returned above if in_interrupt():
 		 */
 		WARN_ON_ONCE(softirq_count());
 	}
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 7c64c420a9f6..dba0b36941a5 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -278,7 +278,7 @@ static int hw_break_release_slot(int breakno)
 		pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu);
 		if (dbg_release_bp_slot(*pevent))
 			/*
-			 * The debugger is responisble for handing the retry on
+			 * The debugger is responsible for handing the retry on
 			 * remove failure.
 			 */
 			return -1;
diff --git a/arch/x86/kernel/mca_32.c b/arch/x86/kernel/mca_32.c
index 63eaf6596233..177183cbb6ae 100644
--- a/arch/x86/kernel/mca_32.c
+++ b/arch/x86/kernel/mca_32.c
@@ -259,7 +259,7 @@ static int __init mca_init(void)
 	/*
 	 * WARNING: Be careful when making changes here. Putting an adapter
 	 * and the motherboard simultaneously into setup mode may result in
-	 * damage to chips (according to The Indispensible PC Hardware Book
+	 * damage to chips (according to The Indispensable PC Hardware Book
 	 * by Hans-Peter Messmer). Also, we disable system interrupts (so
 	 * that we are not disturbed in the middle of this).
 	 */
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 01b0f6d06451..6f789a887c06 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -883,7 +883,7 @@ static int __init update_mp_table(void)
 
 	if (!mpc_new_phys) {
 		unsigned char old, new;
-		/* check if we can change the postion */
+		/* check if we can change the position */
 		mpc->checksum = 0;
 		old = mpf_checksum((unsigned char *)mpc, mpc->length);
 		mpc->checksum = 0xff;
@@ -892,7 +892,7 @@ static int __init update_mp_table(void)
 			printk(KERN_INFO "mpc is readonly, please try alloc_mptable instead\n");
 			return 0;
 		}
-		printk(KERN_INFO "use in-positon replacing\n");
+		printk(KERN_INFO "use in-position replacing\n");
 	} else {
 		mpf->physptr = mpc_new_phys;
 		mpc_new = phys_to_virt(mpc_new_phys);
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index f56a117cef68..e8c33a302006 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -1279,7 +1279,7 @@ static int __init calgary_bus_has_devices(int bus, unsigned short pci_dev)
 
 	if (pci_dev == PCI_DEVICE_ID_IBM_CALIOC2) {
 		/*
-		 * FIXME: properly scan for devices accross the
+		 * FIXME: properly scan for devices across the
 		 * PCI-to-PCI bridge on every CalIOC2 port.
 		 */
 		return 1;
@@ -1295,7 +1295,7 @@ static int __init calgary_bus_has_devices(int bus, unsigned short pci_dev)
 
 /*
  * calgary_init_bitmap_from_tce_table():
- * Funtion for kdump case. In the second/kdump kernel initialize
+ * Function for kdump case. In the second/kdump kernel initialize
  * the bitmap based on the tce table entries obtained from first kernel
  */
 static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl)
diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c
index 58de45ee08b6..7977f0cfe339 100644
--- a/arch/x86/kernel/step.c
+++ b/arch/x86/kernel/step.c
@@ -166,7 +166,7 @@ static void enable_step(struct task_struct *child, bool block)
 	 * Make sure block stepping (BTF) is not enabled unless it should be.
 	 * Note that we don't try to worry about any is_setting_trap_flag()
 	 * instructions after the first when using block stepping.
-	 * So noone should try to use debugger block stepping in a program
+	 * So no one should try to use debugger block stepping in a program
 	 * that uses user-mode single stepping itself.
 	 */
 	if (enable_single_step(child) && block) {
diff --git a/arch/x86/kernel/topology.c b/arch/x86/kernel/topology.c
index 7e4515957a1c..8927486a4649 100644
--- a/arch/x86/kernel/topology.c
+++ b/arch/x86/kernel/topology.c
@@ -39,7 +39,7 @@ int __ref arch_register_cpu(int num)
 	/*
 	 * CPU0 cannot be offlined due to several
 	 * restrictions and assumptions in kernel. This basically
-	 * doesnt add a control file, one cannot attempt to offline
+	 * doesn't add a control file, one cannot attempt to offline
 	 * BSP.
 	 *
 	 * Also certain PCI quirks require not to enable hotplug control
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index ffe5755caa8b..9335bf7dd2e7 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -427,7 +427,7 @@ unsigned long native_calibrate_tsc(void)
 	 * the delta to the previous read. We keep track of the min
 	 * and max values of that delta. The delta is mostly defined
 	 * by the IO time of the PIT access, so we can detect when a
-	 * SMI/SMM disturbance happend between the two reads. If the
+	 * SMI/SMM disturbance happened between the two reads. If the
 	 * maximum time is significantly larger than the minimum time,
 	 * then we discard the result and have another try.
 	 *
@@ -900,7 +900,7 @@ static DECLARE_DELAYED_WORK(tsc_irqwork, tsc_refine_calibration_work);
  * timer based, instead of loop based, we don't block the boot
  * process while this longer calibration is done.
  *
- * If there are any calibration anomolies (too many SMIs, etc),
+ * If there are any calibration anomalies (too many SMIs, etc),
  * or the refined calibration is off by 1% of the fast early
  * calibration, we throw out the new calibration and use the
  * early calibration.
diff --git a/arch/x86/kernel/verify_cpu.S b/arch/x86/kernel/verify_cpu.S
index 0edefc19a113..b9242bacbe59 100644
--- a/arch/x86/kernel/verify_cpu.S
+++ b/arch/x86/kernel/verify_cpu.S
@@ -18,7 +18,7 @@
  *	This file is expected to run in 32bit code.  Currently:
  *
  *	arch/x86/boot/compressed/head_64.S: Boot cpu verification
- *	arch/x86/kernel/trampoline_64.S: secondary processor verfication
+ *	arch/x86/kernel/trampoline_64.S: secondary processor verification
  *	arch/x86/kernel/head_32.S: processor startup
  *
  *	verify_cpu, returns the status of longmode and SSE in register %eax.
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index 547128546cc3..a3911343976b 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -53,7 +53,7 @@ void __sanitize_i387_state(struct task_struct *tsk)
 
 	/*
 	 * None of the feature bits are in init state. So nothing else
-	 * to do for us, as the memory layout is upto date.
+	 * to do for us, as the memory layout is up to date.
 	 */
 	if ((xstate_bv & pcntxt_mask) == pcntxt_mask)
 		return;