[PPC] Remove mpc8272 ads board from arch/ppc

We have a board port in arch/powerpc so we dont need this one anymore.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 0 insertions, 94 deletions

diff --git a/arch/ppc/platforms/pq2ads.h b/arch/ppc/platforms/pq2ads.h
deleted file mode 100644
index 2b287f4e0ca3..000000000000
--- a/arch/ppc/platforms/pq2ads.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Motorola MPC8260ADS/MPC8266ADS-PCI boards.
- * Copied from the RPX-Classic and SBS8260 stuff.
- *
- * Copyright (c) 2001 Dan Malek (dan@mvista.com)
- */
-#ifdef __KERNEL__
-#ifndef __MACH_ADS8260_DEFS
-#define __MACH_ADS8260_DEFS
-
-
-#include <asm/ppcboot.h>
-
-#if defined(CONFIG_ADS8272)
-#define BOARD_CHIP_NAME "8272"
-#endif
-
-/* Memory map is configured by the PROM startup.
- * We just map a few things we need.  The CSR is actually 4 byte-wide
- * registers that can be accessed as 8-, 16-, or 32-bit values.
- */
-#define CPM_MAP_ADDR		((uint)0xf0000000)
-#define BCSR_ADDR		((uint)0xf4500000)
-#define BCSR_SIZE		((uint)(32 * 1024))
-
-#define BOOTROM_RESTART_ADDR	((uint)0xff000104)
-
-/* For our show_cpuinfo hooks. */
-#define CPUINFO_VENDOR		"Motorola"
-#define CPUINFO_MACHINE		"PQ2 ADS PowerPC"
-
-/* The ADS8260 has 16, 32-bit wide control/status registers, accessed
- * only on word boundaries.
- * Not all are used (yet), or are interesting to us (yet).
- */
-
-/* Things of interest in the CSR.
-*/
-#define BCSR0_LED0		((uint)0x02000000)	/* 0 == on */
-#define BCSR0_LED1		((uint)0x01000000)	/* 0 == on */
-#define BCSR1_FETHIEN		((uint)0x08000000)	/* 0 == enable */
-#define BCSR1_FETH_RST		((uint)0x04000000)	/* 0 == reset */
-#define BCSR1_RS232_EN1		((uint)0x02000000)	/* 0 == enable */
-#define BCSR1_RS232_EN2		((uint)0x01000000)	/* 0 == enable */
-#define BCSR3_FETHIEN2		((uint)0x10000000)	/* 0 == enable */
-#define BCSR3_FETH2_RST 	((uint)0x80000000)	/* 0 == reset */
-
-#define PHY_INTERRUPT	SIU_INT_IRQ7
-
-#ifdef CONFIG_PCI
-/* PCI interrupt controller */
-#define PCI_INT_STAT_REG	0xF8200000
-#define PCI_INT_MASK_REG	0xF8200004
-#define PIRQA			(NR_CPM_INTS + 0)
-#define PIRQB			(NR_CPM_INTS + 1)
-#define PIRQC			(NR_CPM_INTS + 2)
-#define PIRQD			(NR_CPM_INTS + 3)
-
-/*
- * PCI memory map definitions for MPC8266ADS-PCI.
- *
- * processor view
- *	local address		PCI address		target
- *	0x80000000-0x9FFFFFFF	0x80000000-0x9FFFFFFF	PCI mem with prefetch
- *	0xA0000000-0xBFFFFFFF	0xA0000000-0xBFFFFFFF	PCI mem w/o prefetch
- *	0xF4000000-0xF7FFFFFF	0x00000000-0x03FFFFFF	PCI IO
- *
- * PCI master view
- *	local address		PCI address		target
- *	0x00000000-0x1FFFFFFF	0x00000000-0x1FFFFFFF	MPC8266 local memory
- */
-
-/* All the other PCI memory map definitions reside at syslib/m82xx_pci.h
-   Here we should redefine what is unique for this board */
-#define M82xx_PCI_SLAVE_MEM_LOCAL	0x00000000	/* Local base */
-#define M82xx_PCI_SLAVE_MEM_BUS		0x00000000	/* PCI base */
-#define M82xx_PCI_SLAVE_MEM_SIZE	0x10000000	/* 256 Mb */
-
-#define M82xx_PCI_SLAVE_SEC_WND_SIZE	~(0x40000000 - 1U)	/* 2 x 512Mb  */
-#define M82xx_PCI_SLAVE_SEC_WND_BASE	0x80000000		/* PCI Memory base */
-
-#if defined(CONFIG_ADS8272)
-#define PCI_INT_TO_SIU 	SIU_INT_IRQ2
-#elif defined(CONFIG_PQ2FADS)
-#define PCI_INT_TO_SIU 	SIU_INT_IRQ6
-#else
-#warning PCI Bridge will be without interrupts support
-#endif
-
-#endif /* CONFIG_PCI */
-
-#endif /* __MACH_ADS8260_DEFS */
-#endif /* __KERNEL__ */