Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 99 insertions, 0 deletions

diff --git a/arch/ppc/boot/common/ns16550.c b/arch/ppc/boot/common/ns16550.c
new file mode 100644
index 000000000000..9017c547a6f6
--- /dev/null
+++ b/arch/ppc/boot/common/ns16550.c
@@ -0,0 +1,99 @@
+/*
+ * COM1 NS16550 support
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/serial.h>
+#include <linux/serial_reg.h>
+#include <asm/serial.h>
+
+#include "nonstdio.h"
+#include "serial.h"
+
+#define SERIAL_BAUD	9600
+
+extern unsigned long ISA_io;
+
+static struct serial_state rs_table[RS_TABLE_SIZE] = {
+	SERIAL_PORT_DFNS	/* Defined in <asm/serial.h> */
+};
+
+static int shift;
+
+unsigned long serial_init(int chan, void *ignored)
+{
+	unsigned long com_port;
+	unsigned char lcr, dlm;
+
+	/* We need to find out which type io we're expecting.  If it's
+	 * 'SERIAL_IO_PORT', we get an offset from the isa_io_base.
+	 * If it's 'SERIAL_IO_MEM', we can the exact location.  -- Tom */
+	switch (rs_table[chan].io_type) {
+		case SERIAL_IO_PORT:
+			com_port = rs_table[chan].port;
+			break;
+		case SERIAL_IO_MEM:
+			com_port = (unsigned long)rs_table[chan].iomem_base;
+			break;
+		default:
+			/* We can't deal with it. */
+			return -1;
+	}
+
+	/* How far apart the registers are. */
+	shift = rs_table[chan].iomem_reg_shift;
+	
+	/* save the LCR */
+	lcr = inb(com_port + (UART_LCR << shift));
+	/* Access baud rate */
+	outb(com_port + (UART_LCR << shift), 0x80);
+	dlm = inb(com_port + (UART_DLM << shift));
+	/*
+	 * Test if serial port is unconfigured.
+	 * We assume that no-one uses less than 110 baud or
+	 * less than 7 bits per character these days.
+	 *  -- paulus.
+	 */
+
+	if ((dlm <= 4) && (lcr & 2))
+		/* port is configured, put the old LCR back */
+		outb(com_port + (UART_LCR << shift), lcr);
+	else {
+		/* Input clock. */
+		outb(com_port + (UART_DLL << shift),
+		     (BASE_BAUD / SERIAL_BAUD) & 0xFF);
+		outb(com_port + (UART_DLM << shift),
+		     (BASE_BAUD / SERIAL_BAUD) >> 8);
+		/* 8 data, 1 stop, no parity */
+		outb(com_port + (UART_LCR << shift), 0x03);
+		/* RTS/DTR */
+		outb(com_port + (UART_MCR << shift), 0x03);
+	}
+	/* Clear & enable FIFOs */
+	outb(com_port + (UART_FCR << shift), 0x07);
+
+	return (com_port);
+}
+
+void
+serial_putc(unsigned long com_port, unsigned char c)
+{
+	while ((inb(com_port + (UART_LSR << shift)) & UART_LSR_THRE) == 0)
+		;
+	outb(com_port, c);
+}
+
+unsigned char
+serial_getc(unsigned long com_port)
+{
+	while ((inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) == 0)
+		;
+	return inb(com_port);
+}
+
+int
+serial_tstc(unsigned long com_port)
+{
+	return ((inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) != 0);
+}