Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.8.  Also includes is a
  minor SSB cleanup as SSB code traditionally is merged through the MIPS
  tree:

  ATH25:
    - MIPS: Add default configuration for ath25

  Boot:
    - For zboot, copy appended dtb to the end of the kernel
    - store the appended dtb address in a variable

  BPF:
    - Fix off by one error in offset allocation

  Cobalt code:
    - Fix typos

  Core code:
    - debugfs_create_file returns NULL on error, so don't use IS_ERR for
      testing for errors.
    - Fix double locking issue in RM7000 S-cache code.  This would only
      affect RM7000 ARC systems on reboot.
    - Fix page table corruption on THP permission changes.
    - Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels.
      David says, there are no compatibility issues raised by this fix.
    - Move some signal code around.
    - Rewrite r4k count/compare clockevent device registration such that
      min_delta_ticks/max_delta_ticks files are guaranteed to be
      initialized.
    - Only register r4k count/compare as clockevent device if we can
      assume the clock to be constant.
    - Fix MSA asm warnings in control reg accessors
    - uasm and tlbex fixes and tweaking.
    - Print segment physical address when EU=1.
    - Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO.
    - CP: Allow booting by VP other than VP 0
    - Cache handling fixes and optimizations for r4k class caches
    - Add hotplug support for R6 processors
    - Cleanup hotplug bits in kconfig
    - traps: return correct si code for accessing nonmapped addresses
    - Remove cpu_has_safe_index_cacheops

  Lantiq:
    - Register IRQ handler for virtual IRQ number
    - Fix EIU interrupt loading code
    - Use the real EXIN count
    - Fix build error.

  Loongson 3:
    - Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES

  Octeon:
    - Delete built-in DTB pruning code for D-Link DSR-1000N.
    - Clean up GPIO definitions in dlink_dsr-1000n.dts.
    - Add more LEDs to the DSR-100n DTS
    - Fix off by one in octeon_irq_gpio_map()
    - Typo fixes
    - Enable SATA by default in cavium_octeon_defconfig
    - Support readq/writeq()
    - Remove forced mappings of USB interrupts.
    - Ensure DMA descriptors are always in the low 4GB
    - Improve USB reset code for OCTEON II.

  Pistachio:
    - Add maintainers entry for pistachio SoC Support
    - Remove plat_setup_iocoherency

  Ralink:
    - Fix pwm UART in spis group pinmux.

  SSB:
    - Change bare unsigned to unsigned int to suit coding style

  Tools:
    - Fix reloc tool compiler warnings.

  Other:
    - Delete use of ARCH_WANT_OPTIONAL_GPIOLIB"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits)
  MIPS: mm: Fix definition of R6 cache instruction
  MIPS: tools: Fix relocs tool compiler warnings
  MIPS: Cobalt: Fix typo
  MIPS: Octeon: Fix typo
  MIPS: Lantiq: Fix build failure
  MIPS: Use CPHYSADDR to implement mips32 __pa
  MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds.
  MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts.
  MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N.
  MIPS: store the appended dtb address in a variable
  MIPS: ZBOOT: copy appended dtb to the end of the kernel
  MIPS: ralink: fix spis group pinmux
  MIPS: Factor o32 specific code into signal_o32.c
  MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present
  MIPS: Use per-mm page to execute branch delay slot instructions
  MIPS: Modify error handling
  MIPS: c-r4k: Use SMP calls for CM indexed cache ops
  MIPS: c-r4k: Avoid small flush_icache_range SMP calls
  MIPS: c-r4k: Local flush_icache_range cache op override
  MIPS: c-r4k: Split r4k_flush_kernel_vmap_range()
  ...

1 files changed, 14 insertions, 33 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 29867139851e..26388562e300 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -64,6 +64,7 @@ config MIPS
 	select GENERIC_TIME_VSYSCALL
 	select ARCH_CLOCKSOURCE_DATA
 	select HANDLE_DOMAIN_IRQ
+	select HAVE_EXIT_THREAD
 
 menu "Machine selection"
 
@@ -384,7 +385,7 @@ config MACH_PISTACHIO
 	select CLKSRC_MIPS_GIC
 	select COMMON_CLK
 	select CSRC_R4K
-	select DMA_MAYBE_COHERENT
+	select DMA_NONCOHERENT
 	select GPIOLIB
 	select IRQ_MIPS_CPU
 	select LIBFDT
@@ -880,7 +881,6 @@ config CAVIUM_OCTEON_SOC
 	select SYS_SUPPORTS_HOTPLUG_CPU if CPU_BIG_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_HAS_CPU_CAVIUM_OCTEON
-	select SWAP_IO_SPACE
 	select HW_HAS_PCI
 	select ZONE_DMA32
 	select HOLES_IN_ZONE
@@ -1111,16 +1111,6 @@ config NEED_DMA_MAP_STATE
 config SYS_HAS_EARLY_PRINTK
 	bool
 
-config HOTPLUG_CPU
-	bool "Support for hot-pluggable CPUs"
-	depends on SMP && SYS_SUPPORTS_HOTPLUG_CPU
-	help
-	  Say Y here to allow turning CPUs off and on. CPUs can be
-	  controlled through /sys/devices/system/cpu.
-	  (Note: power management support will enable this option
-	    automatically on SMP systems. )
-	  Say N if you want to disable CPU hotplug.
-
 config SYS_SUPPORTS_HOTPLUG_CPU
 	bool
 
@@ -1406,7 +1396,6 @@ config CPU_LOONGSON1B
 	bool "Loongson 1B"
 	depends on SYS_HAS_CPU_LOONGSON1B
 	select CPU_LOONGSON1
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select LEDS_GPIO_REGISTER
 	help
 	  The Loongson 1B is a 32-bit SoC, which implements the MIPS32
@@ -2636,6 +2625,16 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs"
+	depends on SMP && SYS_SUPPORTS_HOTPLUG_CPU
+	help
+	  Say Y here to allow turning CPUs off and on. CPUs can be
+	  controlled through /sys/devices/system/cpu.
+	  (Note: power management support will enable this option
+	    automatically on SMP systems. )
+	  Say N if you want to disable CPU hotplug.
+
 config SMP_UP
 	bool
 
@@ -2887,10 +2886,10 @@ choice
 		  the documented boot protocol using a device tree.
 
 	config MIPS_RAW_APPENDED_DTB
-		bool "vmlinux.bin"
+		bool "vmlinux.bin or vmlinuz.bin"
 		help
 		  With this option, the boot code will look for a device tree binary
-		  DTB) appended to raw vmlinux.bin (without decompressor).
+		  DTB) appended to raw vmlinux.bin or vmlinuz.bin.
 		  (e.g. cat vmlinux.bin <filename>.dtb > vmlinux_w_dtb).
 
 		  This is meant as a backward compatibility convenience for those
@@ -2902,24 +2901,6 @@ choice
 		  look like a DTB header after a reboot if no actual DTB is appended
 		  to vmlinux.bin.  Do not leave this option active in a production kernel
 		  if you don't intend to always append a DTB.
-
-	config MIPS_ZBOOT_APPENDED_DTB
-		bool "vmlinuz.bin"
-		depends on SYS_SUPPORTS_ZBOOT
-		help
-		  With this option, the boot code will look for a device tree binary
-		  DTB) appended to raw vmlinuz.bin (with decompressor).
-		  (e.g. cat vmlinuz.bin <filename>.dtb > vmlinuz_w_dtb).
-
-		  This is meant as a backward compatibility convenience for those
-		  systems with a bootloader that can't be upgraded to accommodate
-		  the documented boot protocol using a device tree.
-
-		  Beware that there is very little in terms of protection against
-		  this option being confused by leftover garbage in memory that might
-		  look like a DTB header after a reboot if no actual DTB is appended
-		  to vmlinuz.bin.  Do not leave this option active in a production kernel
-		  if you don't intend to always append a DTB.
 endchoice
 
 choice