Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

9 files changed, 48 insertions, 6 deletions

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index fe59dde41b64..28b35ccb3757 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -204,6 +204,7 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	fsl,magic-packet;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 98da446aa0f2..48f50161ea21 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -1045,7 +1045,7 @@
 					 <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET_REF>;
 				clock-names = "ipg", "ahb", "ptp";
-				gpr = <&gpr>;
+				fsl,stop-mode = <&gpr 0x34 27>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index d6f831731460..09f21aaee936 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -930,6 +930,7 @@
 					      "enet_clk_ref", "enet_out";
 				fsl,num-tx-queues = <3>;
 				fsl,num-rx-queues = <3>;
+				fsl,stop-mode = <&gpr 0x10 3>;
 				status = "disabled";
 			};
 
@@ -1039,6 +1040,7 @@
 					 <&clks IMX6SX_CLK_ENET_PTP>;
 				clock-names = "ipg", "ahb", "ptp",
 					      "enet_clk_ref", "enet_out";
+				fsl,stop-mode = <&gpr 0x10 4>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 2ccf67c4ac1a..345ae9b0db37 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -520,6 +520,7 @@
 					      "enet_clk_ref", "enet_out";
 				fsl,num-tx-queues = <1>;
 				fsl,num-rx-queues = <1>;
+				fsl,stop-mode = <&gpr 0x10 4>;
 				status = "disabled";
 			};
 
@@ -856,6 +857,7 @@
 					      "enet_clk_ref", "enet_out";
 				fsl,num-tx-queues = <1>;
 				fsl,num-rx-queues = <1>;
+				fsl,stop-mode = <&gpr 0x10 3>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 4c22828df55f..cff875b80b60 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -153,6 +153,7 @@
 			"enet_clk_ref", "enet_out";
 		fsl,num-tx-queues = <3>;
 		fsl,num-rx-queues = <3>;
+		fsl,stop-mode = <&gpr 0x10 4>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 76e3ffbbbfbf..5bf0b39fa99b 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -1190,6 +1190,7 @@
 					"enet_clk_ref", "enet_out";
 				fsl,num-tx-queues = <3>;
 				fsl,num-rx-queues = <3>;
+				fsl,stop-mode = <&gpr 0x10 3>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index bfa9ce4c6e69..b9839f86e703 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -576,5 +576,33 @@
 					  "legacy";
 			status = "disabled";
 		};
+
+		mdio: mdio@90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "qcom,ipq4019-mdio";
+			reg = <0x90000 0x64>;
+			status = "disabled";
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+
+			ethphy4: ethernet-phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index bf85d6db4931..0207b6ea6e8a 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -795,6 +795,9 @@ static inline void emit_a32_alu_i(const s8 dst, const u32 val,
 	case BPF_RSH:
 		emit(ARM_LSR_I(rd, rd, val), ctx);
 		break;
+	case BPF_ARSH:
+		emit(ARM_ASR_I(rd, rd, val), ctx);
+		break;
 	case BPF_NEG:
 		emit(ARM_RSB_I(rd, rd, val), ctx);
 		break;
@@ -860,8 +863,8 @@ static inline void emit_a32_arsh_r64(const s8 dst[], const s8 src[],
 	emit(ARM_SUBS_I(tmp2[0], rt, 32), ctx);
 	emit(ARM_MOV_SR(ARM_LR, rd[1], SRTYPE_LSR, rt), ctx);
 	emit(ARM_ORR_SR(ARM_LR, ARM_LR, rd[0], SRTYPE_ASL, ARM_IP), ctx);
-	_emit(ARM_COND_MI, ARM_B(0), ctx);
-	emit(ARM_ORR_SR(ARM_LR, ARM_LR, rd[0], SRTYPE_ASR, tmp2[0]), ctx);
+	_emit(ARM_COND_PL,
+	      ARM_ORR_SR(ARM_LR, ARM_LR, rd[0], SRTYPE_ASR, tmp2[0]), ctx);
 	emit(ARM_MOV_SR(ARM_IP, rd[0], SRTYPE_ASR, rt), ctx);
 
 	arm_bpf_put_reg32(dst_lo, ARM_LR, ctx);
@@ -1408,7 +1411,6 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 	case BPF_ALU | BPF_MUL | BPF_X:
 	case BPF_ALU | BPF_LSH | BPF_X:
 	case BPF_ALU | BPF_RSH | BPF_X:
-	case BPF_ALU | BPF_ARSH | BPF_K:
 	case BPF_ALU | BPF_ARSH | BPF_X:
 	case BPF_ALU64 | BPF_ADD | BPF_K:
 	case BPF_ALU64 | BPF_ADD | BPF_X:
@@ -1465,10 +1467,12 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 	case BPF_ALU64 | BPF_MOD | BPF_K:
 	case BPF_ALU64 | BPF_MOD | BPF_X:
 		goto notyet;
-	/* dst = dst >> imm */
 	/* dst = dst << imm */
-	case BPF_ALU | BPF_RSH | BPF_K:
+	/* dst = dst >> imm */
+	/* dst = dst >> imm (signed) */
 	case BPF_ALU | BPF_LSH | BPF_K:
+	case BPF_ALU | BPF_RSH | BPF_K:
+	case BPF_ALU | BPF_ARSH | BPF_K:
 		if (unlikely(imm > 31))
 			return -EINVAL;
 		if (imm)
diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h
index fb67cbc589e0..e0b593a1498d 100644
--- a/arch/arm/net/bpf_jit_32.h
+++ b/arch/arm/net/bpf_jit_32.h
@@ -94,6 +94,9 @@
 #define ARM_INST_LSR_I		0x01a00020
 #define ARM_INST_LSR_R		0x01a00030
 
+#define ARM_INST_ASR_I		0x01a00040
+#define ARM_INST_ASR_R		0x01a00050
+
 #define ARM_INST_MOV_R		0x01a00000
 #define ARM_INST_MOVS_R		0x01b00000
 #define ARM_INST_MOV_I		0x03a00000