Merge tag 'at91-ab-4.19-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/soc

AT91 SoC for 4.19:
 - New low power mode for sama5d2: ULP1

* tag 'at91-ab-4.19-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: at91: pm: configure wakeup sources for ULP1 mode
  ARM: at91: pm: add PMC fast startup registers defines
  ARM: at91: pm: Add ULP1 mode support
  ARM: at91: pm: Use ULP0 naming instead of slow clock
  MAINTAINERS: Remove the AT91 clk driver entry

Signed-off-by: Olof Johansson <olof@lixom.net>

3 files changed, 282 insertions, 53 deletions

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 849014c01cf4..e8f3d0f97e61 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -40,15 +40,16 @@ extern void at91_pinctrl_gpio_resume(void);
 #endif
 
 static const match_table_t pm_modes __initconst = {
-	{ 0, "standby" },
-	{ AT91_PM_SLOW_CLOCK, "ulp0" },
+	{ AT91_PM_STANDBY, "standby" },
+	{ AT91_PM_ULP0, "ulp0" },
+	{ AT91_PM_ULP1, "ulp1" },
 	{ AT91_PM_BACKUP, "backup" },
 	{ -1, NULL },
 };
 
 static struct at91_pm_data pm_data = {
-	.standby_mode = 0,
-	.suspend_mode = AT91_PM_SLOW_CLOCK,
+	.standby_mode = AT91_PM_STANDBY,
+	.suspend_mode = AT91_PM_ULP0,
 };
 
 #define at91_ramc_read(id, field) \
@@ -79,6 +80,90 @@ static struct at91_pm_bu {
 	phys_addr_t resume;
 } *pm_bu;
 
+struct wakeup_source_info {
+	unsigned int pmc_fsmr_bit;
+	unsigned int shdwc_mr_bit;
+	bool set_polarity;
+};
+
+static const struct wakeup_source_info ws_info[] = {
+	{ .pmc_fsmr_bit = AT91_PMC_FSTT(10),	.set_polarity = true },
+	{ .pmc_fsmr_bit = AT91_PMC_RTCAL,	.shdwc_mr_bit = BIT(17) },
+	{ .pmc_fsmr_bit = AT91_PMC_USBAL },
+	{ .pmc_fsmr_bit = AT91_PMC_SDMMC_CD },
+};
+
+static const struct of_device_id sama5d2_ws_ids[] = {
+	{ .compatible = "atmel,sama5d2-gem",		.data = &ws_info[0] },
+	{ .compatible = "atmel,at91rm9200-rtc",		.data = &ws_info[1] },
+	{ .compatible = "atmel,sama5d3-udc",		.data = &ws_info[2] },
+	{ .compatible = "atmel,at91rm9200-ohci",	.data = &ws_info[2] },
+	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
+	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
+	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
+	{ .compatible = "atmel,sama5d2-sdhci",		.data = &ws_info[3] },
+	{ /* sentinel */ }
+};
+
+static int at91_pm_config_ws(unsigned int pm_mode, bool set)
+{
+	const struct wakeup_source_info *wsi;
+	const struct of_device_id *match;
+	struct platform_device *pdev;
+	struct device_node *np;
+	unsigned int mode = 0, polarity = 0, val = 0;
+
+	if (pm_mode != AT91_PM_ULP1)
+		return 0;
+
+	if (!pm_data.pmc || !pm_data.shdwc)
+		return -EPERM;
+
+	if (!set) {
+		writel(mode, pm_data.pmc + AT91_PMC_FSMR);
+		return 0;
+	}
+
+	/* SHDWC.WUIR */
+	val = readl(pm_data.shdwc + 0x0c);
+	mode |= (val & 0x3ff);
+	polarity |= ((val >> 16) & 0x3ff);
+
+	/* SHDWC.MR */
+	val = readl(pm_data.shdwc + 0x04);
+
+	/* Loop through defined wakeup sources. */
+	for_each_matching_node_and_match(np, sama5d2_ws_ids, &match) {
+		pdev = of_find_device_by_node(np);
+		if (!pdev)
+			continue;
+
+		if (device_may_wakeup(&pdev->dev)) {
+			wsi = match->data;
+
+			/* Check if enabled on SHDWC. */
+			if (wsi->shdwc_mr_bit && !(val & wsi->shdwc_mr_bit))
+				goto put_node;
+
+			mode |= wsi->pmc_fsmr_bit;
+			if (wsi->set_polarity)
+				polarity |= wsi->pmc_fsmr_bit;
+		}
+
+put_node:
+		of_node_put(np);
+	}
+
+	if (mode) {
+		writel(mode, pm_data.pmc + AT91_PMC_FSMR);
+		writel(polarity, pm_data.pmc + AT91_PMC_FSPR);
+	} else {
+		pr_err("AT91: PM: no ULP1 wakeup sources found!");
+	}
+
+	return mode ? 0 : -EPERM;
+}
+
 /*
  * Called after processes are frozen, but before we shutdown devices.
  */
@@ -97,7 +182,7 @@ static int at91_pm_begin(suspend_state_t state)
 		pm_data.mode = -1;
 	}
 
-	return 0;
+	return at91_pm_config_ws(pm_data.mode, true);
 }
 
 /*
@@ -145,7 +230,7 @@ static int at91_pm_verify_clocks(void)
  */
 int at91_suspend_entering_slow_clock(void)
 {
-	return (pm_data.mode >= AT91_PM_SLOW_CLOCK);
+	return (pm_data.mode >= AT91_PM_ULP0);
 }
 EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
 
@@ -186,7 +271,7 @@ static void at91_pm_suspend(suspend_state_t state)
  * event sources; and reduces DRAM power.  But otherwise it's identical to
  * PM_SUSPEND_ON: cpu idle, and nothing fancy done with main or cpu clocks.
  *
- * AT91_PM_SLOW_CLOCK is like STANDBY plus slow clock mode, so drivers must
+ * AT91_PM_ULP0 is like STANDBY plus slow clock mode, so drivers must
  * suspend more deeply, the master clock switches to the clk32k and turns off
  * the main oscillator
  *
@@ -204,7 +289,7 @@ static int at91_pm_enter(suspend_state_t state)
 		/*
 		 * Ensure that clocks are in a valid state.
 		 */
-		if ((pm_data.mode >= AT91_PM_SLOW_CLOCK) &&
+		if (pm_data.mode >= AT91_PM_ULP0 &&
 		    !at91_pm_verify_clocks())
 			goto error;
 
@@ -233,6 +318,7 @@ error:
  */
 static void at91_pm_end(void)
 {
+	at91_pm_config_ws(pm_data.mode, false);
 }
 
 
@@ -478,31 +564,28 @@ static void __init at91_pm_sram_init(void)
 			&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
 }
 
-static void __init at91_pm_backup_init(void)
+static bool __init at91_is_pm_mode_active(int pm_mode)
+{
+	return (pm_data.standby_mode == pm_mode ||
+		pm_data.suspend_mode == pm_mode);
+}
+
+static int __init at91_pm_backup_init(void)
 {
 	struct gen_pool *sram_pool;
 	struct device_node *np;
 	struct platform_device *pdev = NULL;
+	int ret = -ENODEV;
 
-	if ((pm_data.standby_mode != AT91_PM_BACKUP) &&
-	    (pm_data.suspend_mode != AT91_PM_BACKUP))
-		return;
+	if (!at91_is_pm_mode_active(AT91_PM_BACKUP))
+		return 0;
 
 	pm_bu = NULL;
 
-	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-shdwc");
-	if (!np) {
-		pr_warn("%s: failed to find shdwc!\n", __func__);
-		return;
-	}
-
-	pm_data.shdwc = of_iomap(np, 0);
-	of_node_put(np);
-
 	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu");
 	if (!np) {
 		pr_warn("%s: failed to find sfrbu!\n", __func__);
-		goto sfrbu_fail;
+		return ret;
 	}
 
 	pm_data.sfrbu = of_iomap(np, 0);
@@ -529,6 +612,7 @@ static void __init at91_pm_backup_init(void)
 	pm_bu = (void *)gen_pool_alloc(sram_pool, sizeof(struct at91_pm_bu));
 	if (!pm_bu) {
 		pr_warn("%s: unable to alloc securam!\n", __func__);
+		ret = -ENOMEM;
 		goto securam_fail;
 	}
 
@@ -536,19 +620,60 @@ static void __init at91_pm_backup_init(void)
 	pm_bu->canary = __pa_symbol(&canary);
 	pm_bu->resume = __pa_symbol(cpu_resume);
 
-	return;
+	return 0;
 
-sfrbu_fail:
-	iounmap(pm_data.shdwc);
-	pm_data.shdwc = NULL;
 securam_fail:
 	iounmap(pm_data.sfrbu);
 	pm_data.sfrbu = NULL;
+	return ret;
+}
 
-	if (pm_data.standby_mode == AT91_PM_BACKUP)
-		pm_data.standby_mode = AT91_PM_SLOW_CLOCK;
-	if (pm_data.suspend_mode == AT91_PM_BACKUP)
-		pm_data.suspend_mode = AT91_PM_SLOW_CLOCK;
+static void __init at91_pm_use_default_mode(int pm_mode)
+{
+	if (pm_mode != AT91_PM_ULP1 && pm_mode != AT91_PM_BACKUP)
+		return;
+
+	if (pm_data.standby_mode == pm_mode)
+		pm_data.standby_mode = AT91_PM_ULP0;
+	if (pm_data.suspend_mode == pm_mode)
+		pm_data.suspend_mode = AT91_PM_ULP0;
+}
+
+static void __init at91_pm_modes_init(void)
+{
+	struct device_node *np;
+	int ret;
+
+	if (!at91_is_pm_mode_active(AT91_PM_BACKUP) &&
+	    !at91_is_pm_mode_active(AT91_PM_ULP1))
+		return;
+
+	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-shdwc");
+	if (!np) {
+		pr_warn("%s: failed to find shdwc!\n", __func__);
+		goto ulp1_default;
+	}
+
+	pm_data.shdwc = of_iomap(np, 0);
+	of_node_put(np);
+
+	ret = at91_pm_backup_init();
+	if (ret) {
+		if (!at91_is_pm_mode_active(AT91_PM_ULP1))
+			goto unmap;
+		else
+			goto backup_default;
+	}
+
+	return;
+
+unmap:
+	iounmap(pm_data.shdwc);
+	pm_data.shdwc = NULL;
+ulp1_default:
+	at91_pm_use_default_mode(AT91_PM_ULP1);
+backup_default:
+	at91_pm_use_default_mode(AT91_PM_BACKUP);
 }
 
 struct pmc_info {
@@ -644,7 +769,7 @@ void __init sama5d2_pm_init(void)
 	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
 		return;
 
-	at91_pm_backup_init();
+	at91_pm_modes_init();
 	sama5_pm_init();
 }
 
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index f95d31496f08..9bd4e6ca672a 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -21,8 +21,10 @@
 #define AT91_MEMCTRL_SDRAMC	1
 #define AT91_MEMCTRL_DDRSDR	2
 
-#define	AT91_PM_SLOW_CLOCK	0x01
-#define	AT91_PM_BACKUP		0x02
+#define	AT91_PM_STANDBY		0x00
+#define AT91_PM_ULP0		0x01
+#define AT91_PM_ULP1		0x02
+#define	AT91_PM_BACKUP		0x03
 
 #ifndef __ASSEMBLY__
 struct at91_pm_data {
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index daca91feea6a..a7c6ae13c945 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -42,6 +42,15 @@ tmp2	.req	r5
 	.endm
 
 /*
+ * Wait for main oscillator selection is done
+ */
+	.macro wait_moscsels
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_MOSCSELS
+	beq	1b
+	.endm
+
+/*
  * Wait until PLLA has locked.
  */
 	.macro wait_pllalock
@@ -112,19 +121,20 @@ ENTRY(at91_pm_suspend_in_sram)
 	bl	at91_sramc_self_refresh
 
 	ldr	r0, .pm_mode
-	cmp	r0, #AT91_PM_SLOW_CLOCK
-	beq	slow_clock
+	cmp	r0, #AT91_PM_STANDBY
+	beq	standby
 	cmp	r0, #AT91_PM_BACKUP
 	beq	backup_mode
 
+	bl	at91_ulp_mode
+	b	exit_suspend
+
+standby:
 	/* Wait for interrupt */
 	ldr	pmc, .pmc_base
 	at91_cpu_idle
 	b	exit_suspend
 
-slow_clock:
-	bl	at91_slowck_mode
-	b	exit_suspend
 backup_mode:
 	bl	at91_backup_mode
 	b	exit_suspend
@@ -151,7 +161,102 @@ ENTRY(at91_backup_mode)
 	str	tmp1, [r0, #0]
 ENDPROC(at91_backup_mode)
 
-ENTRY(at91_slowck_mode)
+.macro at91_pm_ulp0_mode
+	ldr	pmc, .pmc_base
+
+	/* Turn off the crystal oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	/* Wait for interrupt */
+	at91_cpu_idle
+
+	/* Turn on the crystal oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	wait_moscrdy
+.endm
+
+/**
+ * Note: This procedure only applies on the platform which uses
+ * the external crystal oscillator as a main clock source.
+ */
+.macro at91_pm_ulp1_mode
+	ldr	pmc, .pmc_base
+
+	/* Switch the main clock source to 12-MHz RC oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	bic	tmp1, tmp1, #AT91_PMC_MOSCSEL
+	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	wait_moscsels
+
+	/* Disable the crystal oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
+	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	/* Switch the master clock source to main clock */
+	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	bic	tmp1, tmp1, #AT91_PMC_CSS
+	orr	tmp1, tmp1, #AT91_PMC_CSS_MAIN
+	str	tmp1, [pmc, #AT91_PMC_MCKR]
+
+	wait_mckrdy
+
+	/* Enter the ULP1 mode by set WAITMODE bit in CKGR_MOR */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	orr	tmp1, tmp1, #AT91_PMC_WAITMODE
+	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	wait_mckrdy
+
+	/* Enable the crystal oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
+	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	wait_moscrdy
+
+	/* Switch the master clock source to slow clock */
+	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	bic	tmp1, tmp1, #AT91_PMC_CSS
+	str	tmp1, [pmc, #AT91_PMC_MCKR]
+
+	wait_mckrdy
+
+	/* Switch main clock source to crystal oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	orr	tmp1, tmp1, #AT91_PMC_MOSCSEL
+	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	wait_moscsels
+
+	/* Switch the master clock source to main clock */
+	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	bic	tmp1, tmp1, #AT91_PMC_CSS
+	orr	tmp1, tmp1, #AT91_PMC_CSS_MAIN
+	str	tmp1, [pmc, #AT91_PMC_MCKR]
+
+	wait_mckrdy
+.endm
+
+ENTRY(at91_ulp_mode)
 	ldr	pmc, .pmc_base
 
 	/* Save Master clock setting */
@@ -174,22 +279,19 @@ ENTRY(at91_slowck_mode)
 	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
 	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
 
-	/* Turn off the main oscillator */
-	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
-	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
-	orr	tmp1, tmp1, #AT91_PMC_KEY
-	str	tmp1, [pmc, #AT91_CKGR_MOR]
+	ldr	r0, .pm_mode
+	cmp	r0, #AT91_PM_ULP1
+	beq	ulp1_mode
 
-	/* Wait for interrupt */
-	at91_cpu_idle
+	at91_pm_ulp0_mode
+	b	ulp_exit
 
-	/* Turn on the main oscillator */
-	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
-	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
-	orr	tmp1, tmp1, #AT91_PMC_KEY
-	str	tmp1, [pmc, #AT91_CKGR_MOR]
+ulp1_mode:
+	at91_pm_ulp1_mode
+	b	ulp_exit
 
-	wait_moscrdy
+ulp_exit:
+	ldr	pmc, .pmc_base
 
 	/* Restore PLLA setting */
 	ldr	tmp1, .saved_pllar
@@ -212,7 +314,7 @@ ENTRY(at91_slowck_mode)
 	wait_mckrdy
 
 	mov	pc, lr
-ENDPROC(at91_slowck_mode)
+ENDPROC(at91_ulp_mode)
 
 /*
  * void at91_sramc_self_refresh(unsigned int is_active)