Merge tag 'uniphier-dt64-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt

Pull "UniPhier ARM64 SoC DT updates for v4.15" from Masahiro Yamada:

- add thermal monitor and thermal zone nodes
- add efuse nodes
- fix W=2 warnings
- add GPIO controller nodes and related properties
- add resets properties

* tag 'uniphier-dt64-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: add resets properties
  arm64: dts: uniphier: add eMMC hardware reset provider node
  arm64: dts: uniphier: add GPIO hog definition
  arm64: dts: uniphier: route on-board device IRQ to GPIO controller
  arm64: dts: uniphier: add GPIO controller nodes
  arm64: dts: uniphier: fix W=2 build warnings
  arm64: dts: uniphier: enable NAND for PXs3 reference board
  arm64: dts: uniphier: add efuse node for LD11, LD20, and PXs3
  arm64: dts: uniphier: add nodes of thermal monitor and thermal zone for LD20

6 files changed, 248 insertions, 6 deletions

diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
index ffb473ad2e0f..dd7193acc7df 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
@@ -40,13 +40,22 @@
 };
 
 &ethsc {
-	interrupts = <0 48 4>;
+	interrupt-parent = <&gpio>;
+	interrupts = <0 8>;
 };
 
 &serial0 {
 	status = "okay";
 };
 
+&gpio {
+	xirq0 {
+		gpio-hog;
+		gpios = <120 0>;
+		input;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index ee4aff53a5f5..2120b0f1febb 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -7,6 +7,8 @@
  * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 /memreserve/ 0x80000000 0x02000000;
 
 / {
@@ -49,7 +51,7 @@
 		};
 	};
 
-	cluster0_opp: opp_table {
+	cluster0_opp: opp-table {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -96,6 +98,11 @@
 		};
 	};
 
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <1 13 4>,
@@ -118,6 +125,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
 			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
 		};
 
 		serial1: serial@54006900 {
@@ -128,6 +136,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
 			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
 		};
 
 		serial2: serial@54006a00 {
@@ -138,6 +147,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
 			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
 		};
 
 		serial3: serial@54006b00 {
@@ -148,6 +158,32 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
 			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>,
+				      <&pinctrl 43 0 0>,
+				      <&pinctrl 51 0 0>,
+				      <&pinctrl 96 0 0>,
+				      <&pinctrl 160 0 0>,
+				      <&pinctrl 184 0 0>;
+			gpio-ranges-group-names = "gpio_range0",
+						  "gpio_range1",
+						  "gpio_range2",
+						  "gpio_range3",
+						  "gpio_range4",
+						  "gpio_range5";
+			ngpios = <200>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+						     <21 217 3>;
 		};
 
 		adamv@57920000 {
@@ -171,6 +207,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
 			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
 			clock-frequency = <100000>;
 		};
 
@@ -184,6 +221,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
 			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
 			clock-frequency = <100000>;
 		};
 
@@ -194,6 +232,7 @@
 			#size-cells = <0>;
 			interrupts = <0 43 4>;
 			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
 			clock-frequency = <400000>;
 		};
 
@@ -207,6 +246,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
 			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
 			clock-frequency = <100000>;
 		};
 
@@ -220,6 +260,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c4>;
 			clocks = <&peri_clk 8>;
+			resets = <&peri_rst 8>;
 			clock-frequency = <100000>;
 		};
 
@@ -230,6 +271,7 @@
 			#size-cells = <0>;
 			interrupts = <0 25 4>;
 			clocks = <&peri_clk 9>;
+			resets = <&peri_rst 9>;
 			clock-frequency = <400000>;
 		};
 
@@ -282,9 +324,11 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&sys_clk 4>;
+			resets = <&sys_rst 4>;
 			bus-width = <8>;
 			mmc-ddr-1_8v;
 			mmc-hs200-1_8v;
+			mmc-pwrseq = <&emmc_pwrseq>;
 			cdns,phy-input-delay-legacy = <4>;
 			cdns,phy-input-delay-mmc-highspeed = <2>;
 			cdns,phy-input-delay-mmc-ddr = <3>;
@@ -355,6 +399,24 @@
 			};
 		};
 
+		soc-glue@5f900000 {
+			compatible = "socionext,uniphier-ld11-soc-glue-debug",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x68>;
+			};
+		};
+
 		aidet: aidet@5fc20000 {
 			compatible = "socionext,uniphier-ld11-aidet";
 			reg = <0x5fc20000 0x200>;
@@ -400,6 +462,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			clocks = <&sys_clk 2>;
+			resets = <&sys_rst 2>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
index 1ca0c8620dc5..d99e3731358c 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
@@ -40,13 +40,22 @@
 };
 
 &ethsc {
-	interrupts = <0 48 4>;
+	interrupt-parent = <&gpio>;
+	interrupts = <0 8>;
 };
 
 &serial0 {
 	status = "okay";
 };
 
+&gpio {
+	xirq0 {
+		gpio-hog;
+		gpios = <120 0>;
+		input;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index a29c279b6e8e..5c81070944cc 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -7,6 +7,9 @@
  * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+
 /memreserve/ 0x80000000 0x02000000;
 
 / {
@@ -46,6 +49,7 @@
 			clocks = <&sys_clk 32>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -64,6 +68,7 @@
 			clocks = <&sys_clk 33>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@101 {
@@ -76,7 +81,7 @@
 		};
 	};
 
-	cluster0_opp: opp_table0 {
+	cluster0_opp: opp-table0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -114,7 +119,7 @@
 		};
 	};
 
-	cluster1_opp: opp_table1 {
+	cluster1_opp: opp-table1 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -165,6 +170,11 @@
 		};
 	};
 
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <1 13 4>,
@@ -173,6 +183,40 @@
 			     <1 10 4>;
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;	/* 250ms */
+			polling-delay = <1000>;		/* 1000ms */
+			thermal-sensors = <&pvtctl>;
+
+			trips {
+				cpu_crit: cpu-crit {
+					temperature = <110000>;	/* 110C */
+					hysteresis = <2000>;
+					type = "critical";
+				};
+				cpu_alert: cpu-alert {
+					temperature = <100000>;	/* 100C */
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0
+					    THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu2
+					    THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -187,6 +231,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
 			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
 		};
 
 		serial1: serial@54006900 {
@@ -197,6 +242,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
 			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
 		};
 
 		serial2: serial@54006a00 {
@@ -207,6 +253,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
 			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
 		};
 
 		serial3: serial@54006b00 {
@@ -217,6 +264,26 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
 			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>,
+				      <&pinctrl 96 0 0>,
+				      <&pinctrl 160 0 0>;
+			gpio-ranges-group-names = "gpio_range0",
+						  "gpio_range1",
+						  "gpio_range2";
+			ngpios = <205>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+						     <21 217 3>;
 		};
 
 		adamv@57920000 {
@@ -240,6 +307,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
 			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
 			clock-frequency = <100000>;
 		};
 
@@ -253,6 +321,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
 			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
 			clock-frequency = <100000>;
 		};
 
@@ -263,6 +332,7 @@
 			#size-cells = <0>;
 			interrupts = <0 43 4>;
 			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
 			clock-frequency = <400000>;
 		};
 
@@ -276,6 +346,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
 			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
 			clock-frequency = <100000>;
 		};
 
@@ -289,6 +360,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c4>;
 			clocks = <&peri_clk 8>;
+			resets = <&peri_rst 8>;
 			clock-frequency = <100000>;
 		};
 
@@ -299,6 +371,7 @@
 			#size-cells = <0>;
 			interrupts = <0 25 4>;
 			clocks = <&peri_clk 9>;
+			resets = <&peri_rst 9>;
 			clock-frequency = <400000>;
 		};
 
@@ -356,9 +429,11 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&sys_clk 4>;
+			resets = <&sys_rst 4>;
 			bus-width = <8>;
 			mmc-ddr-1_8v;
 			mmc-hs200-1_8v;
+			mmc-pwrseq = <&emmc_pwrseq>;
 			cdns,phy-input-delay-legacy = <4>;
 			cdns,phy-input-delay-mmc-highspeed = <2>;
 			cdns,phy-input-delay-mmc-ddr = <3>;
@@ -376,6 +451,24 @@
 			};
 		};
 
+		soc-glue@5f900000 {
+			compatible = "socionext,uniphier-ld20-soc-glue-debug",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x68>;
+			};
+		};
+
 		aidet: aidet@5fc20000 {
 			compatible = "socionext,uniphier-ld20-aidet";
 			reg = <0x5fc20000 0x200>;
@@ -410,6 +503,13 @@
 			watchdog {
 				compatible = "socionext,uniphier-wdt";
 			};
+
+			pvtctl: pvtctl {
+				compatible = "socionext,uniphier-ld20-thermal";
+				interrupts = <0 3 4>;
+				#thermal-sensor-cells = <0>;
+				socionext,tmod-calibration = <0x0f22 0x68ee>;
+			};
 		};
 
 		nand: nand@68000000 {
@@ -421,6 +521,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			clocks = <&sys_clk 2>;
+			resets = <&sys_rst 2>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
index d65f746a3f9d..dad4743fb151 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
@@ -60,3 +60,7 @@
 &i2c3 {
 	status = "okay";
 };
+
+&nand {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index 384729fa740f..48e733136db4 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -7,6 +7,8 @@
  * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 /memreserve/ 0x80000000 0x02000000;
 
 / {
@@ -73,7 +75,7 @@
 		};
 	};
 
-	cluster0_opp: opp_table {
+	cluster0_opp: opp-table {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -124,6 +126,11 @@
 		};
 	};
 
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <1 13 4>,
@@ -146,6 +153,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
 			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
 		};
 
 		serial1: serial@54006900 {
@@ -156,6 +164,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
 			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
 		};
 
 		serial2: serial@54006a00 {
@@ -166,6 +175,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
 			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
 		};
 
 		serial3: serial@54006b00 {
@@ -176,6 +186,26 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
 			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>,
+				      <&pinctrl 96 0 0>,
+				      <&pinctrl 160 0 0>;
+			gpio-ranges-group-names = "gpio_range0",
+						  "gpio_range1",
+						  "gpio_range2";
+			ngpios = <286>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+						     <21 217 3>;
 		};
 
 		i2c0: i2c@58780000 {
@@ -188,6 +218,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
 			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
 			clock-frequency = <100000>;
 		};
 
@@ -201,6 +232,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
 			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
 			clock-frequency = <100000>;
 		};
 
@@ -214,6 +246,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2>;
 			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
 			clock-frequency = <100000>;
 		};
 
@@ -227,6 +260,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
 			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
 			clock-frequency = <100000>;
 		};
 
@@ -238,6 +272,7 @@
 			#size-cells = <0>;
 			interrupts = <0 26 4>;
 			clocks = <&peri_clk 10>;
+			resets = <&peri_rst 10>;
 			clock-frequency = <400000>;
 		};
 
@@ -295,9 +330,11 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&sys_clk 4>;
+			resets = <&sys_rst 4>;
 			bus-width = <8>;
 			mmc-ddr-1_8v;
 			mmc-hs200-1_8v;
+			mmc-pwrseq = <&emmc_pwrseq>;
 			cdns,phy-input-delay-legacy = <4>;
 			cdns,phy-input-delay-mmc-highspeed = <2>;
 			cdns,phy-input-delay-mmc-ddr = <3>;
@@ -315,6 +352,24 @@
 			};
 		};
 
+		soc-glue@5f900000 {
+			compatible = "socionext,uniphier-pxs3-soc-glue-debug",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x68>;
+			};
+		};
+
 		aidet: aidet@5fc20000 {
 			compatible = "socionext,uniphier-pxs3-aidet";
 			reg = <0x5fc20000 0x200>;
@@ -360,6 +415,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			clocks = <&sys_clk 2>;
+			resets = <&sys_rst 2>;
 		};
 	};
 };