Merge branch 'dev-5.10' into dev-5.10-inteldev-5.10-intel

Pull 5.10.67 stable from OpenBMC upstream.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

10 files changed, 186 insertions, 115 deletions

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index cdc1e3d60c58..3ceb36cac512 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -151,7 +151,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		rpm_msg_ram: memory@0x60000 {
+		rpm_msg_ram: memory@60000 {
 			reg = <0x0 0x60000 0x0 0x6000>;
 			no-map;
 		};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index e8c37a1693d3..cc08dc4eb56a 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -20,7 +20,7 @@
 		stdout-path = "serial0";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x0 0x40000000 0x0 0x20000000>;
 	};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 829e37ac82f6..776a6b0f61a6 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -567,10 +567,10 @@
 
 		pcie1: pci@10000000 {
 			compatible = "qcom,pcie-ipq8074";
-			reg =  <0x10000000 0xf1d
-				0x10000f20 0xa8
-				0x00088000 0x2000
-				0x10100000 0x1000>;
+			reg =  <0x10000000 0xf1d>,
+			       <0x10000f20 0xa8>,
+			       <0x00088000 0x2000>,
+			       <0x10100000 0x1000>;
 			reg-names = "dbi", "elbi", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <1>;
@@ -629,10 +629,10 @@
 
 		pcie0: pci@20000000 {
 			compatible = "qcom,pcie-ipq8074";
-			reg =  <0x20000000 0xf1d
-				0x20000f20 0xa8
-				0x00080000 0x2000
-				0x20100000 0x1000>;
+			reg = <0x20000000 0xf1d>,
+			      <0x20000f20 0xa8>,
+			      <0x00080000 0x2000>,
+			      <0x20100000 0x1000>;
 			reg-names = "dbi", "elbi", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <0>;
diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
index 5969b5cfdc85..cb82864a90ef 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /* Copyright (c) 2015, LGE Inc. All rights reserved.
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com>
  */
 
 /dts-v1/;
@@ -15,6 +16,9 @@
 	qcom,board-id = <0xb64 0>;
 	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
 
+	/* Bullhead firmware doesn't support PSCI */
+	/delete-node/ psci;
+
 	aliases {
 		serial0 = &blsp1_uart2;
 	};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
index baa55643b40f..ffe1a9bd8f70 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
@@ -32,3 +32,7 @@
 		};
 	};
 };
+
+&tlmm {
+	gpio-reserved-ranges = <85 4>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 6707f898607f..45f9a44326a6 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -14,16 +14,18 @@
 	chosen { };
 
 	clocks {
-		xo_board: xo_board {
+		xo_board: xo-board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
 		};
 
-		sleep_clk: sleep_clk {
+		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
+			clock-output-names = "sleep_clk";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index fd6ae5464dea..eef17434d12a 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -17,14 +17,14 @@
 	chosen { };
 
 	clocks {
-		xo_board: xo_board {
+		xo_board: xo-board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
 			clock-output-names = "xo_board";
 		};
 
-		sleep_clk: sleep_clk {
+		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32764>;
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index deb928d303c2..f87054575ce7 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -17,14 +17,14 @@
 	chosen { };
 
 	clocks {
-		xo_board: xo_board {
+		xo_board: xo-board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
 			clock-output-names = "xo_board";
 		};
 
-		sleep_clk: sleep_clk {
+		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32764>;
@@ -343,10 +343,19 @@
 		};
 
 		qhee_code: qhee-code@85800000 {
-			reg = <0x0 0x85800000 0x0 0x3700000>;
+			reg = <0x0 0x85800000 0x0 0x600000>;
 			no-map;
 		};
 
+		rmtfs_mem: memory@85e00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x85e00000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
 		smem_region: smem-mem@86000000 {
 			reg = <0 0x86000000 0 0x200000>;
 			no-map;
@@ -357,58 +366,44 @@
 			no-map;
 		};
 
-		modem_fw_mem: modem-fw-region@8ac00000 {
+		mpss_region: mpss@8ac00000 {
 			reg = <0x0 0x8ac00000 0x0 0x7e00000>;
 			no-map;
 		};
 
-		adsp_fw_mem: adsp-fw-region@92a00000 {
+		adsp_region: adsp@92a00000 {
 			reg = <0x0 0x92a00000 0x0 0x1e00000>;
 			no-map;
 		};
 
-		pil_mba_mem: pil-mba-region@94800000 {
+		mba_region: mba@94800000 {
 			reg = <0x0 0x94800000 0x0 0x200000>;
 			no-map;
 		};
 
-		buffer_mem: buffer-region@94a00000 {
+		buffer_mem: tzbuffer@94a00000 {
 			reg = <0x0 0x94a00000 0x0 0x100000>;
 			no-map;
 		};
 
-		venus_fw_mem: venus-fw-region@9f800000 {
+		venus_region: venus@9f800000 {
 			reg = <0x0 0x9f800000 0x0 0x800000>;
 			no-map;
 		};
 
-		secure_region2: secure-region2@f7c00000 {
-			reg = <0x0 0xf7c00000 0x0 0x5c00000>;
-			no-map;
-		};
-
 		adsp_mem: adsp-region@f6000000 {
 			reg = <0x0 0xf6000000 0x0 0x800000>;
 			no-map;
 		};
 
-		qseecom_ta_mem: qseecom-ta-region@fec00000 {
-			reg = <0x0 0xfec00000 0x0 0x1000000>;
-			no-map;
-		};
-
 		qseecom_mem: qseecom-region@f6800000 {
 			reg = <0x0 0xf6800000 0x0 0x1400000>;
 			no-map;
 		};
 
-		secure_display_memory: secure-region@f5c00000 {
-			reg = <0x0 0xf5c00000 0x0 0x5c00000>;
-			no-map;
-		};
-
-		cont_splash_mem: cont-splash-region@9d400000 {
-			reg = <0x0 0x9d400000 0x0 0x23ff000>;
+		zap_shader_region: gpu@fed00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xfed00000 0x0 0xa00000>;
 			no-map;
 		};
 	};
@@ -527,14 +522,18 @@
 			reg = <0x01f40000 0x20000>;
 		};
 
-		tlmm: pinctrl@3000000 {
+		tlmm: pinctrl@3100000 {
 			compatible = "qcom,sdm630-pinctrl";
-			reg = <0x03000000 0xc00000>;
+			reg = <0x03100000 0x400000>,
+				  <0x03500000 0x400000>,
+				  <0x03900000 0x400000>;
+			reg-names = "south", "center", "north";
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
-			#gpio-cells = <0x2>;
+			gpio-ranges = <&tlmm 0 0 114>;
+			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <0x2>;
+			#interrupt-cells = <2>;
 
 			blsp1_uart1_default: blsp1-uart1-default {
 				pins = "gpio0", "gpio1", "gpio2", "gpio3";
@@ -554,40 +553,48 @@
 				bias-disable;
 			};
 
-			blsp2_uart1_tx_active: blsp2-uart1-tx-active {
-				pins = "gpio16";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp2_uart1_tx_sleep: blsp2-uart1-tx-sleep {
-				pins = "gpio16";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
+			blsp2_uart1_default: blsp2-uart1-active {
+				tx-rts {
+					pins = "gpio16", "gpio19";
+					function = "blsp_uart5";
+					drive-strength = <2>;
+					bias-disable;
+				};
 
-			blsp2_uart1_rxcts_active: blsp2-uart1-rxcts-active {
-				pins = "gpio17", "gpio18";
-				drive-strength = <2>;
-				bias-disable;
-			};
+				rx {
+					/*
+					 * Avoid garbage data while BT module
+					 * is powered off or not driving signal
+					 */
+					pins = "gpio17";
+					function = "blsp_uart5";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
 
-			blsp2_uart1_rxcts_sleep: blsp2-uart1-rxcts-sleep {
-				pins = "gpio17", "gpio18";
-				drive-strength = <2>;
-				bias-no-pull;
+				cts {
+					/* Match the pull of the BT module */
+					pins = "gpio18";
+					function = "blsp_uart5";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
 			};
 
-			blsp2_uart1_rfr_active: blsp2-uart1-rfr-active {
-				pins = "gpio19";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			blsp2_uart1_sleep: blsp2-uart1-sleep {
+				tx {
+					pins = "gpio16";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
 
-			blsp2_uart1_rfr_sleep: blsp2-uart1-rfr-sleep {
-				pins = "gpio19";
-				drive-strength = <2>;
-				bias-no-pull;
+				rx-cts-rts {
+					pins = "gpio17", "gpio18", "gpio19";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-no-pull;
+				};
 			};
 
 			i2c1_default: i2c1-default {
@@ -686,50 +693,106 @@
 				bias-pull-up;
 			};
 
-			sdc1_clk_on: sdc1-clk-on {
-				pins = "sdc1_clk";
-				bias-disable;
-				drive-strength = <16>;
-			};
+			sdc1_state_on: sdc1-on {
+				clk {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
 
-			sdc1_clk_off: sdc1-clk-off {
-				pins = "sdc1_clk";
-				bias-disable;
-				drive-strength = <2>;
-			};
+				cmd {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
 
-			sdc1_cmd_on: sdc1-cmd-on {
-				pins = "sdc1_cmd";
-				bias-pull-up;
-				drive-strength = <10>;
-			};
+				data {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
 
-			sdc1_cmd_off: sdc1-cmd-off {
-				pins = "sdc1_cmd";
-				bias-pull-up;
-				drive-strength = <2>;
+				rclk {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
 			};
 
-			sdc1_data_on: sdc1-data-on {
-				pins = "sdc1_data";
-				bias-pull-up;
-				drive-strength = <8>;
-			};
+			sdc1_state_off: sdc1-off {
+				clk {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
 
-			sdc1_data_off: sdc1-data-off {
-				pins = "sdc1_data";
-				bias-pull-up;
-				drive-strength = <2>;
+				cmd {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
 			};
 
-			sdc1_rclk_on: sdc1-rclk-on {
-				pins = "sdc1_rclk";
-				bias-pull-down;
+			sdc2_state_on: sdc2-on {
+				clk {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				sd-cd {
+					pins = "gpio54";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
 			};
 
-			sdc1_rclk_off: sdc1-rclk-off {
-				pins = "sdc1_rclk";
-				bias-pull-down;
+			sdc2_state_off: sdc2-off {
+				clk {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				sd-cd {
+					pins = "gpio54";
+					bias-disable;
+					drive-strength = <2>;
+				};
 			};
 		};
 
@@ -821,8 +884,8 @@
 			clock-names = "core", "iface", "xo";
 
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
-			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
+			pinctrl-0 = <&sdc1_state_on>;
+			pinctrl-1 = <&sdc1_state_off>;
 
 			bus-width = <8>;
 			non-removable;
@@ -967,10 +1030,8 @@
 			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
 			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_uart1_tx_active &blsp2_uart1_rxcts_active
-				&blsp2_uart1_rfr_active>;
-			pinctrl-1 = <&blsp2_uart1_tx_sleep &blsp2_uart1_rxcts_sleep
-				&blsp2_uart1_rfr_sleep>;
+			pinctrl-0 = <&blsp2_uart1_default>;
+			pinctrl-1 = <&blsp2_uart1_sleep>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 888dc23a530e..ad6561843ba2 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -564,7 +564,7 @@
 		left_spkr: wsa8810-left{
 			compatible = "sdw10217211000";
 			reg = <0 3>;
-			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrLeft";
 			#sound-dai-cells = <0>;
@@ -572,7 +572,7 @@
 
 		right_spkr: wsa8810-right{
 			compatible = "sdw10217211000";
-			powerdown-gpios = <&wcdgpio 3 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
 			reg = <0 4>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrRight";
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index d4547a192748..ec356fe07ac8 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2346,7 +2346,7 @@
 			};
 		};
 
-		epss_l3: interconnect@18591000 {
+		epss_l3: interconnect@18590000 {
 			compatible = "qcom,sm8250-epss-l3";
 			reg = <0 0x18590000 0 0x1000>;