diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-05-04 23:31:18 +0400 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-05-04 23:31:18 +0400 |
| commit | 6fa52ed33bea997374a88dbacbba5bf8c7ac4fef (patch) | |
| tree | a0904b78d66c9b99d6acf944cf58bcaa0cffc511 /arch/arm/mach-s3c24xx | |
| parent | 1db772216f48978d5146b858586f6178433aad38 (diff) | |
| parent | bc8fd900c4d460b4e4bf785bb48bfced0ac9941b (diff) | |
| download | linux-6fa52ed33bea997374a88dbacbba5bf8c7ac4fef.tar.xz | |
Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver changes from Olof Johansson:
"This is a rather large set of patches for device drivers that for one
reason or another the subsystem maintainer preferred to get merged
through the arm-soc tree. There are both new drivers as well as
existing drivers that are getting converted from platform-specific
code into standalone drivers using the appropriate subsystem specific
interfaces.
In particular, we can now have pinctrl, clk, clksource and irqchip
drivers in one file per driver, without the need to call into platform
specific interface, or to get called from platform specific code, as
long as all information about the hardware is provided through a
device tree.
Most of the drivers we touch this time are for clocksource. Since now
most of them are part of drivers/clocksource, I expect that we won't
have to touch these again from arm-soc and can let the clocksource
maintainers take care of these in the future.
Another larger part of this series is specific to the exynos platform,
which is seeing some significant effort in upstreaming and
modernization of its device drivers this time around, which
unfortunately is also the cause for the churn and a lot of the merge
conflicts.
There is one new subsystem that gets merged as part of this series:
the reset controller interface, which is a very simple interface for
taking devices on the SoC out of reset or back into reset. Patches to
use this interface on i.MX follow later in this merge window, and we
are going to have other platforms (at least tegra and sirf) get
converted in 3.11. This will let us get rid of platform specific
callbacks in a number of platform independent device drivers."
* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits)
irqchip: s3c24xx: add missing __init annotations
ARM: dts: Disable the RTC by default on exynos5
clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3}
ARM: exynos: restore mach/regs-clock.h for exynos5
clocksource: exynos_mct: fix build error on non-DT
pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register()
irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure
reset: NULL deref on allocation failure
reset: Add reset controller API
dt: describe base reset signal binding
ARM: EXYNOS: Add arm-pmu DT binding for exynos421x
ARM: EXYNOS: Add arm-pmu DT binding for exynos5250
ARM: EXYNOS: Enable PMUs for exynos4
irqchip: exynos-combiner: Correct combined IRQs for exynos4
irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq
ARM: EXYNOS: fix compilation error introduced due to common clock migration
clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
clk: exynos4: export clocks required for fimc-is
clk: samsung: Fix compilation error
clk: tegra: fix enum tegra114_clk to match binding
...
Diffstat (limited to 'arch/arm/mach-s3c24xx')
33 files changed, 151 insertions, 1468 deletions
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 8d5fa6ece014..f2f7088bfd22 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -30,6 +30,7 @@ config CPU_S3C2410 select S3C2410_CLOCK select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX select S3C2410_PM if PM + select SAMSUNG_HRT help Support for S3C2410 and S3C2410A family from the S3C24XX line of Samsung Mobile CPUs. @@ -40,6 +41,7 @@ config CPU_S3C2412 select CPU_LLSERIAL_S3C2440 select S3C2412_DMA if S3C24XX_DMA select S3C2412_PM if PM + select SAMSUNG_HRT help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line @@ -51,6 +53,7 @@ config CPU_S3C2416 select S3C2443_COMMON select S3C2443_DMA if S3C24XX_DMA select SAMSUNG_CLKSRC + select SAMSUNG_HRT help Support for the S3C2416 SoC from the S3C24XX line @@ -61,6 +64,7 @@ config CPU_S3C2440 select S3C2410_CLOCK select S3C2410_PM if PM select S3C2440_DMA if S3C24XX_DMA + select SAMSUNG_HRT help Support for S3C2440 Samsung Mobile CPU based systems. @@ -70,6 +74,7 @@ config CPU_S3C2442 select CPU_LLSERIAL_S3C2440 select S3C2410_CLOCK select S3C2410_PM if PM + select SAMSUNG_HRT help Support for S3C2442 Samsung Mobile CPU based systems. @@ -84,6 +89,7 @@ config CPU_S3C2443 select S3C2443_COMMON select S3C2443_DMA if S3C24XX_DMA select SAMSUNG_CLKSRC + select SAMSUNG_HRT help Support for the S3C2443 SoC from the S3C24XX line @@ -395,6 +401,7 @@ config S3C2412_DMA config S3C2412_PM bool select S3C2412_PM_SLEEP + select SAMSUNG_WAKEMASK help Internal config node to apply S3C2412 power management diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index af53d27d5c36..6f46ecfc8396 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -14,7 +14,7 @@ obj- := # core -obj-y += common.o irq.o +obj-y += common.o obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o @@ -22,7 +22,7 @@ obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o @@ -31,9 +31,9 @@ obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index 8a2b4137ddb6..307c3714be55 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -21,6 +21,7 @@ extern void s3c2410_map_io(void); extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c2410_init_clocks(int xtal); extern void s3c2410_restart(char mode, const char *cmd); +extern void s3c2410_init_irq(void); #else #define s3c2410_init_clocks NULL #define s3c2410_init_uarts NULL @@ -36,6 +37,7 @@ extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c2412_init_clocks(int xtal); extern int s3c2412_baseclk_add(void); extern void s3c2412_restart(char mode, const char *cmd); +extern void s3c2412_init_irq(void); #else #define s3c2412_init_clocks NULL #define s3c2412_init_uarts NULL @@ -73,6 +75,7 @@ extern void s3c244x_restart(char mode, const char *cmd); #ifdef CONFIG_CPU_S3C2440 extern int s3c2440_init(void); extern void s3c2440_map_io(void); +extern void s3c2440_init_irq(void); #else #define s3c2440_init NULL #define s3c2440_map_io NULL @@ -81,6 +84,7 @@ extern void s3c2440_map_io(void); #ifdef CONFIG_CPU_S3C2442 extern int s3c2442_init(void); extern void s3c2442_map_io(void); +extern void s3c2442_init_irq(void); #else #define s3c2442_init NULL #define s3c2442_map_io NULL diff --git a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S deleted file mode 100644 index 6a21beeba1da..000000000000 --- a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S +++ /dev/null @@ -1,70 +0,0 @@ -/* - * arch/arm/mach-s3c2410/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for S3C2410-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - -/* We have a problem that the INTOFFSET register does not always - * show one interrupt. Occasionally we get two interrupts through - * the prioritiser, and this causes the INTOFFSET register to show - * what looks like the logical-or of the two interrupt numbers. - * - * Thanks to Klaus, Shannon, et al for helping to debug this problem -*/ - -#define INTPND (0x10) -#define INTOFFSET (0x14) - -#include <mach/hardware.h> -#include <asm/irq.h> - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - mov \base, #S3C24XX_VA_IRQ - - @@ try the interrupt offset register, since it is there - - ldr \irqstat, [\base, #INTPND ] - teq \irqstat, #0 - beq 1002f - ldr \irqnr, [\base, #INTOFFSET ] - mov \tmp, #1 - tst \irqstat, \tmp, lsl \irqnr - bne 1001f - - @@ the number specified is not a valid irq, so try - @@ and work it out for ourselves - - mov \irqnr, #0 @@ start here - - @@ work out which irq (if any) we got - - movs \tmp, \irqstat, lsl#16 - addeq \irqnr, \irqnr, #16 - moveq \irqstat, \irqstat, lsr#16 - tst \irqstat, #0xff - addeq \irqnr, \irqnr, #8 - moveq \irqstat, \irqstat, lsr#8 - tst \irqstat, #0xf - addeq \irqnr, \irqnr, #4 - moveq \irqstat, \irqstat, lsr#4 - tst \irqstat, #0x3 - addeq \irqnr, \irqnr, #2 - moveq \irqstat, \irqstat, lsr#2 - tst \irqstat, #0x1 - addeq \irqnr, \irqnr, #1 - - @@ we have the value -1001: - adds \irqnr, \irqnr, #IRQ_EINT0 -1002: - @@ exit here, Z flag unset if IRQ - - .endm diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h index 1e73f5fa8659..b6dd4cb5a2ec 100644 --- a/arch/arm/mach-s3c24xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h @@ -59,49 +59,53 @@ #define IRQ_ADCPARENT S3C2410_IRQ(31) /* interrupts generated from the external interrupts sources */ -#define IRQ_EINT4 S3C2410_IRQ(32) /* 48 */ -#define IRQ_EINT5 S3C2410_IRQ(33) -#define IRQ_EINT6 S3C2410_IRQ(34) -#define IRQ_EINT7 S3C2410_IRQ(35) -#define IRQ_EINT8 S3C2410_IRQ(36) -#define IRQ_EINT9 S3C2410_IRQ(37) -#define IRQ_EINT10 S3C2410_IRQ(38) -#define IRQ_EINT11 S3C2410_IRQ(39) -#define IRQ_EINT12 S3C2410_IRQ(40) -#define IRQ_EINT13 S3C2410_IRQ(41) -#define IRQ_EINT14 S3C2410_IRQ(42) -#define IRQ_EINT15 S3C2410_IRQ(43) -#define IRQ_EINT16 S3C2410_IRQ(44) -#define IRQ_EINT17 S3C2410_IRQ(45) -#define IRQ_EINT18 S3C2410_IRQ(46) -#define IRQ_EINT19 S3C2410_IRQ(47) -#define IRQ_EINT20 S3C2410_IRQ(48) /* 64 */ -#define IRQ_EINT21 S3C2410_IRQ(49) -#define IRQ_EINT22 S3C2410_IRQ(50) -#define IRQ_EINT23 S3C2410_IRQ(51) +#define IRQ_EINT0_2412 S3C2410_IRQ(32) +#define IRQ_EINT1_2412 S3C2410_IRQ(33) +#define IRQ_EINT2_2412 S3C2410_IRQ(34) +#define IRQ_EINT3_2412 S3C2410_IRQ(35) +#define IRQ_EINT4 S3C2410_IRQ(36) /* 52 */ +#define IRQ_EINT5 S3C2410_IRQ(37) +#define IRQ_EINT6 S3C2410_IRQ(38) +#define IRQ_EINT7 S3C2410_IRQ(39) +#define IRQ_EINT8 S3C2410_IRQ(40) +#define IRQ_EINT9 S3C2410_IRQ(41) +#define IRQ_EINT10 S3C2410_IRQ(42) +#define IRQ_EINT11 S3C2410_IRQ(43) +#define IRQ_EINT12 S3C2410_IRQ(44) +#define IRQ_EINT13 S3C2410_IRQ(45) +#define IRQ_EINT14 S3C2410_IRQ(46) +#define IRQ_EINT15 S3C2410_IRQ(47) +#define IRQ_EINT16 S3C2410_IRQ(48) +#define IRQ_EINT17 S3C2410_IRQ(49) +#define IRQ_EINT18 S3C2410_IRQ(50) +#define IRQ_EINT19 S3C2410_IRQ(51) +#define IRQ_EINT20 S3C2410_IRQ(52) /* 68 */ +#define IRQ_EINT21 S3C2410_IRQ(53) +#define IRQ_EINT22 S3C2410_IRQ(54) +#define IRQ_EINT23 S3C2410_IRQ(55) #define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4) #define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x))) -#define IRQ_LCD_FIFO S3C2410_IRQ(52) -#define IRQ_LCD_FRAME S3C2410_IRQ(53) +#define IRQ_LCD_FIFO S3C2410_IRQ(56) +#define IRQ_LCD_FRAME S3C2410_IRQ(57) /* IRQs for the interal UARTs, and ADC * these need to be ordered in number of appearance in the * SUBSRC mask register */ -#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54) +#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+58) -#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */ +#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 74 */ #define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1) #define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2) -#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */ +#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 77 */ #define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4) #define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5) -#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */ +#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 80 */ #define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7) #define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8) @@ -136,7 +140,7 @@ /* second interrupt-register of s3c2416/s3c2450 */ -#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 54 + 29) +#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 58 + 29) #define IRQ_S3C2416_2D S3C2416_IRQ(0) #define IRQ_S3C2416_IIC1 S3C2416_IRQ(1) #define IRQ_S3C2416_RESERVED2 S3C2416_IRQ(2) diff --git a/arch/arm/mach-s3c24xx/irq-s3c2412.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c deleted file mode 100644 index 67d763178d3f..000000000000 --- a/arch/arm/mach-s3c24xx/irq-s3c2412.c +++ /dev/null @@ -1,215 +0,0 @@ -/* linux/arch/arm/mach-s3c2412/irq.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/irq.h> -#include <plat/pm.h> - -#include "s3c2412-power.h" - -#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) -#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0)))) - -/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by - * having them turn up in both the INT* and the EINT* registers. Whilst - * both show the status, they both now need to be acked when the IRQs - * go off. -*/ - -static void -s3c2412_irq_mask(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask | bitval, S3C2410_INTMSK); - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask | bitval, S3C2412_EINTMASK); -} - -static inline void -s3c2412_irq_ack(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - - __raw_writel(bitval, S3C2412_EINTPEND); - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - -static inline void -s3c2412_irq_maskack(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask|bitval, S3C2410_INTMSK); - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask | bitval, S3C2412_EINTMASK); - - __raw_writel(bitval, S3C2412_EINTPEND); - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - -static void -s3c2412_irq_unmask(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask & ~bitval, S3C2412_EINTMASK); - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask & ~bitval, S3C2410_INTMSK); -} - -static struct irq_chip s3c2412_irq_eint0t4 = { - .irq_ack = s3c2412_irq_ack, - .irq_mask = s3c2412_irq_mask, - .irq_unmask = s3c2412_irq_unmask, - .irq_set_wake = s3c_irq_wake, - .irq_set_type = s3c_irqext_type, -}; - -#define INTBIT(x) (1 << ((x) - S3C2410_IRQSUB(0))) - -/* CF and SDI sub interrupts */ - -static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - - if (subsrc & INTBIT(IRQ_S3C2412_SDI)) - generic_handle_irq(IRQ_S3C2412_SDI); - - if (subsrc & INTBIT(IRQ_S3C2412_CF)) - generic_handle_irq(IRQ_S3C2412_CF); -} - -#define INTMSK_CFSDI (1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0)) -#define SUBMSK_CFSDI INTMSK_SUB(IRQ_S3C2412_SDI, IRQ_S3C2412_CF) - -static void s3c2412_irq_cfsdi_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI); -} - -static void s3c2412_irq_cfsdi_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_CFSDI); -} - -static void s3c2412_irq_cfsdi_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI); -} - -static struct irq_chip s3c2412_irq_cfsdi = { - .name = "s3c2412-cfsdi", - .irq_ack = s3c2412_irq_cfsdi_ack, - .irq_mask = s3c2412_irq_cfsdi_mask, - .irq_unmask = s3c2412_irq_cfsdi_unmask, -}; - -static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state) -{ - unsigned long pwrcfg; - - pwrcfg = __raw_readl(S3C2412_PWRCFG); - if (state) - pwrcfg &= ~S3C2412_PWRCFG_RTC_MASKIRQ; - else - pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ; - __raw_writel(pwrcfg, S3C2412_PWRCFG); - - return s3c_irq_chip.irq_set_wake(data, state); -} - -static struct irq_chip s3c2412_irq_rtc_chip; - -static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned int irqno; - - for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) { - irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4, - handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - /* add demux support for CF/SDI */ - - irq_set_chained_handler(IRQ_S3C2412_CFSDI, s3c2412_irq_demux_cfsdi); - - for (irqno = IRQ_S3C2412_SDI; irqno <= IRQ_S3C2412_CF; irqno++) { - irq_set_chip_and_handler(irqno, &s3c2412_irq_cfsdi, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - /* change RTC IRQ's set wake method */ - - s3c2412_irq_rtc_chip = s3c_irq_chip; - s3c2412_irq_rtc_chip.irq_set_wake = s3c2412_irq_rtc_wake; - - irq_set_chip(IRQ_RTC, &s3c2412_irq_rtc_chip); - - return 0; -} - -static struct subsys_interface s3c2412_irq_interface = { - .name = "s3c2412_irq", - .subsys = &s3c2412_subsys, - .add_dev = s3c2412_irq_add, -}; - -static int s3c2412_irq_init(void) -{ - return subsys_interface_register(&s3c2412_irq_interface); -} - -arch_initcall(s3c2412_irq_init); diff --git a/arch/arm/mach-s3c24xx/irq-s3c2440.c b/arch/arm/mach-s3c24xx/irq-s3c2440.c deleted file mode 100644 index 4a18cde439cc..000000000000 --- a/arch/arm/mach-s3c24xx/irq-s3c2440.c +++ /dev/null @@ -1,128 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/irq.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> - -/* WDT/AC97 */ - -static void s3c_irq_demux_wdtac97(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 13; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - generic_handle_irq(IRQ_S3C2440_WDT); - } - if (subsrc & 2) { - generic_handle_irq(IRQ_S3C2440_AC97); - } - } -} - - -#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0)) - -static void -s3c_irq_wdtac97_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13); -} - -static void -s3c_irq_wdtac97_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_WDT); -} - -static void -s3c_irq_wdtac97_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13); -} - -static struct irq_chip s3c_irq_wdtac97 = { - .irq_mask = s3c_irq_wdtac97_mask, - .irq_unmask = s3c_irq_wdtac97_unmask, - .irq_ack = s3c_irq_wdtac97_ack, -}; - -static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned int irqno; - - printk("S3C2440: IRQ Support\n"); - - /* add new chained handler for wdt, ac7 */ - - irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip, - handle_level_irq); - irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97); - - for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) { - irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct subsys_interface s3c2440_irq_interface = { - .name = "s3c2440_irq", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_irq_add, -}; - -static int s3c2440_irq_init(void) -{ - return subsys_interface_register(&s3c2440_irq_interface); -} - -arch_initcall(s3c2440_irq_init); - diff --git a/arch/arm/mach-s3c24xx/irq-s3c244x.c b/arch/arm/mach-s3c24xx/irq-s3c244x.c deleted file mode 100644 index 5fe8e58d3afd..000000000000 --- a/arch/arm/mach-s3c24xx/irq-s3c244x.c +++ /dev/null @@ -1,142 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> - -/* camera irq */ - -static void s3c_irq_demux_cam(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 11; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - generic_handle_irq(IRQ_S3C2440_CAM_C); - } - if (subsrc & 2) { - generic_handle_irq(IRQ_S3C2440_CAM_P); - } - } -} - -#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0)) - -static void -s3c_irq_cam_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11); -} - -static void -s3c_irq_cam_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_CAM); -} - -static void -s3c_irq_cam_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11); -} - -static struct irq_chip s3c_irq_cam = { - .irq_mask = s3c_irq_cam_mask, - .irq_unmask = s3c_irq_cam_unmask, - .irq_ack = s3c_irq_cam_ack, -}; - -static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned int irqno; - - irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip, - handle_level_irq); - set_irq_flags(IRQ_NFCON, IRQF_VALID); - - /* add chained handler for camera */ - - irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip, - handle_level_irq); - irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam); - - for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) { - irq_set_chip_and_handler(irqno, &s3c_irq_cam, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct subsys_interface s3c2440_irq_interface = { - .name = "s3c2440_irq", - .subsys = &s3c2440_subsys, - .add_dev = s3c244x_irq_add, -}; - -static int s3c2440_irq_init(void) -{ - return subsys_interface_register(&s3c2440_irq_interface); -} - -arch_initcall(s3c2440_irq_init); - -static struct subsys_interface s3c2442_irq_interface = { - .name = "s3c2442_irq", - .subsys = &s3c2442_subsys, - .add_dev = s3c244x_irq_add, -}; - - -static int s3c2442_irq_init(void) -{ - return subsys_interface_register(&s3c2442_irq_interface); -} - -arch_initcall(s3c2442_irq_init); diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c deleted file mode 100644 index b41c2cb7af4a..000000000000 --- a/arch/arm/mach-s3c24xx/irq.c +++ /dev/null @@ -1,821 +0,0 @@ -/* - * S3C24XX IRQ handling - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. -*/ - -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/irqdomain.h> -#include <linux/irqchip/chained_irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/regs-irqtype.h> -#include <plat/pm.h> - -#define S3C_IRQTYPE_NONE 0 -#define S3C_IRQTYPE_EINT 1 -#define S3C_IRQTYPE_EDGE 2 -#define S3C_IRQTYPE_LEVEL 3 - -struct s3c_irq_data { - unsigned int type; - unsigned long parent_irq; - - /* data gets filled during init */ - struct s3c_irq_intc *intc; - unsigned long sub_bits; - struct s3c_irq_intc *sub_intc; -}; - -/* - * Sructure holding the controller data - * @reg_pending register holding pending irqs - * @reg_intpnd special register intpnd in main intc - * @reg_mask mask register - * @domain irq_domain of the controller - * @parent parent controller for ext and sub irqs - * @irqs irq-data, always s3c_irq_data[32] - */ -struct s3c_irq_intc { - void __iomem *reg_pending; - void __iomem *reg_intpnd; - void __iomem *reg_mask; - struct irq_domain *domain; - struct s3c_irq_intc *parent; - struct s3c_irq_data *irqs; -}; - -static void s3c_irq_mask(struct irq_data *data) -{ - struct s3c_irq_intc *intc = data->domain->host_data; - struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; - struct s3c_irq_data *parent_data; - unsigned long mask; - unsigned int irqno; - - mask = __raw_readl(intc->reg_mask); - mask |= (1UL << data->hwirq); - __raw_writel(mask, intc->reg_mask); - - if (parent_intc && irq_data->parent_irq) { - parent_data = &parent_intc->irqs[irq_data->parent_irq]; - - /* check to see if we need to mask the parent IRQ */ - if ((mask & parent_data->sub_bits) == parent_data->sub_bits) { - irqno = irq_find_mapping(parent_intc->domain, - irq_data->parent_irq); - s3c_irq_mask(irq_get_irq_data(irqno)); - } - } -} - -static void s3c_irq_unmask(struct irq_data *data) -{ - struct s3c_irq_intc *intc = data->domain->host_data; - struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; - unsigned long mask; - unsigned int irqno; - - mask = __raw_readl(intc->reg_mask); - mask &= ~(1UL << data->hwirq); - __raw_writel(mask, intc->reg_mask); - - if (parent_intc && irq_data->parent_irq) { - irqno = irq_find_mapping(parent_intc->domain, - irq_data->parent_irq); - s3c_irq_unmask(irq_get_irq_data(irqno)); - } -} - -static inline void s3c_irq_ack(struct irq_data *data) -{ - struct s3c_irq_intc *intc = data->domain->host_data; - unsigned long bitval = 1UL << data->hwirq; - - __raw_writel(bitval, intc->reg_pending); - if (intc->reg_intpnd) - __raw_writel(bitval, intc->reg_intpnd); -} - -static int s3c_irqext_type_set(void __iomem *gpcon_reg, - void __iomem *extint_reg, - unsigned long gpcon_offset, - unsigned long extint_offset, - unsigned int type) -{ - unsigned long newvalue = 0, value; - - /* Set the GPIO to external interrupt mode */ - value = __raw_readl(gpcon_reg); - value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset); - __raw_writel(value, gpcon_reg); - - /* Set the external interrupt to pointed trigger type */ - switch (type) - { - case IRQ_TYPE_NONE: - pr_warn("No edge setting!\n"); - break; - - case IRQ_TYPE_EDGE_RISING: - newvalue = S3C2410_EXTINT_RISEEDGE; - break; - - case IRQ_TYPE_EDGE_FALLING: - newvalue = S3C2410_EXTINT_FALLEDGE; - break; - - case IRQ_TYPE_EDGE_BOTH: - newvalue = S3C2410_EXTINT_BOTHEDGE; - break; - - case IRQ_TYPE_LEVEL_LOW: - newvalue = S3C2410_EXTINT_LOWLEV; - break; - - case IRQ_TYPE_LEVEL_HIGH: - newvalue = S3C2410_EXTINT_HILEV; - break; - - default: - pr_err("No such irq type %d", type); - return -EINVAL; - } - - value = __raw_readl(extint_reg); - value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset); - __raw_writel(value, extint_reg); - - return 0; -} - -static int s3c_irqext_type(struct irq_data *data, unsigned int type) -{ - void __iomem *extint_reg; - void __iomem *gpcon_reg; - unsigned long gpcon_offset, extint_offset; - - if ((data->hwirq >= 4) && (data->hwirq <= 7)) { - gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C24XX_EXTINT0; - gpcon_offset = (data->hwirq) * 2; - extint_offset = (data->hwirq) * 4; - } else if ((data->hwirq >= 8) && (data->hwirq <= 15)) { - gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C24XX_EXTINT1; - gpcon_offset = (data->hwirq - 8) * 2; - extint_offset = (data->hwirq - 8) * 4; - } else if ((data->hwirq >= 16) && (data->hwirq <= 23)) { - gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C24XX_EXTINT2; - gpcon_offset = (data->hwirq - 8) * 2; - extint_offset = (data->hwirq - 16) * 4; - } else { - return -EINVAL; - } - - return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, - extint_offset, type); -} - -static int s3c_irqext0_type(struct irq_data *data, unsigned int type) -{ - void __iomem *extint_reg; - void __iomem *gpcon_reg; - unsigned long gpcon_offset, extint_offset; - - if ((data->hwirq >= 0) && (data->hwirq <= 3)) { - gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C24XX_EXTINT0; - gpcon_offset = (data->hwirq) * 2; - extint_offset = (data->hwirq) * 4; - } else { - return -EINVAL; - } - - return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, - extint_offset, type); -} - -static struct irq_chip s3c_irq_chip = { - .name = "s3c", - .irq_ack = s3c_irq_ack, - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_set_wake = s3c_irq_wake -}; - -static struct irq_chip s3c_irq_level_chip = { - .name = "s3c-level", - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_ack = s3c_irq_ack, -}; - -static struct irq_chip s3c_irqext_chip = { - .name = "s3c-ext", - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_ack = s3c_irq_ack, - .irq_set_type = s3c_irqext_type, - .irq_set_wake = s3c_irqext_wake -}; - -static struct irq_chip s3c_irq_eint0t4 = { - .name = "s3c-ext0", - .irq_ack = s3c_irq_ack, - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_set_wake = s3c_irq_wake, - .irq_set_type = s3c_irqext0_type, -}; - -static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc) -{ - struct irq_chip *chip = irq_desc_get_chip(desc); - struct s3c_irq_intc *intc = desc->irq_data.domain->host_data; - struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq]; - struct s3c_irq_intc *sub_intc = irq_data->sub_intc; - unsigned long src; - unsigned long msk; - unsigned int n; - - chained_irq_enter(chip, desc); - - src = __raw_readl(sub_intc->reg_pending); - msk = __raw_readl(sub_intc->reg_mask); - - src &= ~msk; - src &= irq_data->sub_bits; - - while (src) { - n = __ffs(src); - src &= ~(1 << n); - generic_handle_irq(irq_find_mapping(sub_intc->domain, n)); - } - - chained_irq_exit(chip, desc); -} - -#ifdef CONFIG_FIQ -/** - * s3c24xx_set_fiq - set the FIQ routing - * @irq: IRQ number to route to FIQ on processor. - * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing. - * - * Change the state of the IRQ to FIQ routing depending on @irq and @on. If - * @on is true, the @irq is checked to see if it can be routed and the - * interrupt controller updated to route the IRQ. If @on is false, the FIQ - * routing is cleared, regardless of which @irq is specified. - */ -int s3c24xx_set_fiq(unsigned int irq, bool on) -{ - u32 intmod; - unsigned offs; - - if (on) { - offs = irq - FIQ_START; - if (offs > 31) - return -EINVAL; - - intmod = 1 << offs; - } else { - intmod = 0; - } - - __raw_writel(intmod, S3C2410_INTMOD); - return 0; -} - -EXPORT_SYMBOL_GPL(s3c24xx_set_fiq); -#endif - -static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - struct s3c_irq_intc *intc = h->host_data; - struct s3c_irq_data *irq_data = &intc->irqs[hw]; - struct s3c_irq_intc *parent_intc; - struct s3c_irq_data *parent_irq_data; - unsigned int irqno; - - if (!intc) { - pr_err("irq-s3c24xx: no controller found for hwirq %lu\n", hw); - return -EINVAL; - } - - if (!irq_data) { - pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", hw); - return -EINVAL; - } - - /* attach controller pointer to irq_data */ - irq_data->intc = intc; - - /* set handler and flags */ - switch (irq_data->type) { - case S3C_IRQTYPE_NONE: - return 0; - case S3C_IRQTYPE_EINT: - if (irq_data->parent_irq) - irq_set_chip_and_handler(virq, &s3c_irqext_chip, - handle_edge_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_eint0t4, - handle_edge_irq); - break; - case S3C_IRQTYPE_EDGE: - if (irq_data->parent_irq || - intc->reg_pending == S3C2416_SRCPND2) - irq_set_chip_and_handler(virq, &s3c_irq_level_chip, - handle_edge_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_chip, - handle_edge_irq); - break; - case S3C_IRQTYPE_LEVEL: - if (irq_data->parent_irq) - irq_set_chip_and_handler(virq, &s3c_irq_level_chip, - handle_level_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_chip, - handle_level_irq); - break; - default: - pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type); - return -EINVAL; - } - set_irq_flags(virq, IRQF_VALID); - - if (irq_data->parent_irq) { - parent_intc = intc->parent; - if (!parent_intc) { - pr_err("irq-s3c24xx: no parent controller found for hwirq %lu\n", - hw); - goto err; - } - - parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; - if (!irq_data) { - pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", - hw); - goto err; - } - - parent_irq_data->sub_intc = intc; - parent_irq_data->sub_bits |= (1UL << hw); - - /* attach the demuxer to the parent irq */ - irqno = irq_find_mapping(parent_intc->domain, - irq_data->parent_irq); - if (!irqno) { - pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n", - irq_data->parent_irq); - goto err; - } - irq_set_chained_handler(irqno, s3c_irq_demux); - } - - return 0; - -err: - set_irq_flags(virq, 0); - - /* the only error can result from bad mapping data*/ - return -EINVAL; -} - -static struct irq_domain_ops s3c24xx_irq_ops = { - .map = s3c24xx_irq_map, - .xlate = irq_domain_xlate_twocell, -}; - -static void s3c24xx_clear_intc(struct s3c_irq_intc *intc) -{ - void __iomem *reg_source; - unsigned long pend; - unsigned long last; - int i; - - /* if intpnd is set, read the next pending irq from there */ - reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending; - - last = 0; - for (i = 0; i < 4; i++) { - pend = __raw_readl(reg_source); - - if (pend == 0 || pend == last) - break; - - __raw_writel(pend, intc->reg_pending); - if (intc->reg_intpnd) - __raw_writel(pend, intc->reg_intpnd); - - pr_info("irq: clearing pending status %08x\n", (int)pend); - last = pend; - } -} - -struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, - struct s3c_irq_data *irq_data, - struct s3c_irq_intc *parent, - unsigned long address) -{ - struct s3c_irq_intc *intc; - void __iomem *base = (void *)0xf6000000; /* static mapping */ - int irq_num; - int irq_start; - int irq_offset; - int ret; - - intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL); - if (!intc) - return ERR_PTR(-ENOMEM); - - intc->irqs = irq_data; - - if (parent) - intc->parent = parent; - - /* select the correct data for the controller. - * Need to hard code the irq num start and offset - * to preserve the static mapping for now - */ - switch (address) { - case 0x4a000000: - pr_debug("irq: found main intc\n"); - intc->reg_pending = base; - intc->reg_mask = base + 0x08; - intc->reg_intpnd = base + 0x10; - irq_num = 32; - irq_start = S3C2410_IRQ(0); - irq_offset = 0; - break; - case 0x4a000018: - pr_debug("irq: found subintc\n"); - intc->reg_pending = base + 0x18; - intc->reg_mask = base + 0x1c; - irq_num = 29; - irq_start = S3C2410_IRQSUB(0); - irq_offset = 0; - break; - case 0x4a000040: - pr_debug("irq: found intc2\n"); - intc->reg_pending = base + 0x40; - intc->reg_mask = base + 0x48; - intc->reg_intpnd = base + 0x50; - irq_num = 8; - irq_start = S3C2416_IRQ(0); - irq_offset = 0; - break; - case 0x560000a4: - pr_debug("irq: found eintc\n"); - base = (void *)0xfd000000; - - intc->reg_mask = base + 0xa4; - intc->reg_pending = base + 0xa8; - irq_num = 20; - irq_start = S3C2410_IRQ(32); - irq_offset = 4; - break; - default: - pr_err("irq: unsupported controller address\n"); - ret = -EINVAL; - goto err; - } - - /* now that all the data is complete, init the irq-domain */ - s3c24xx_clear_intc(intc); - intc->domain = irq_domain_add_legacy(np, irq_num, irq_start, - irq_offset, &s3c24xx_irq_ops, - intc); - if (!intc->domain) { - pr_err("irq: could not create irq-domain\n"); - ret = -EINVAL; - goto err; - } - - return intc; - -err: - kfree(intc); - return ERR_PTR(ret); -} - -/* s3c24xx_init_irq - * - * Initialise S3C2410 IRQ system -*/ - -static struct s3c_irq_data init_base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_eint[32] = { - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ -}; - -static struct s3c_irq_data init_subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ -}; - -void __init s3c24xx_init_irq(void) -{ - struct s3c_irq_intc *main_intc; - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - main_intc = s3c24xx_init_intc(NULL, &init_base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_subint[0], main_intc, 0x4a000018); - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); -} - -#ifdef CONFIG_CPU_S3C2416 -static struct s3c_irq_data init_s3c2416base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ - { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_NONE, }, - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_s3c2416subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ -}; - -static struct s3c_irq_data init_s3c2416_second[32] = { - { .type = S3C_IRQTYPE_EDGE }, /* 2D */ - { .type = S3C_IRQTYPE_EDGE }, /* IIC1 */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */ - { .type = S3C_IRQTYPE_EDGE }, /* PCM1 */ - { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */ - { .type = S3C_IRQTYPE_EDGE }, /* I2S1 */ -}; - -void __init s3c2416_init_irq(void) -{ - struct s3c_irq_intc *main_intc; - - pr_info("S3C2416: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018); - - s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040); -} - -#endif - -#ifdef CONFIG_CPU_S3C2443 -static struct s3c_irq_data init_s3c2443base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ - { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* CFON */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - - -static struct s3c_irq_data init_s3c2443subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ -}; - -void __init s3c2443_init_irq(void) -{ - struct s3c_irq_intc *main_intc; - - pr_info("S3C2443: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018); -} -#endif diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 0e0279e79150..e27b5c91b3db 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -63,6 +63,8 @@ #include <linux/mtd/map.h> #include <linux/mtd/physmap.h> +#include <plat/samsung-time.h> + #include "common.h" static struct resource amlm5900_nor_resource = @@ -160,6 +162,7 @@ static void __init amlm5900_map_io(void) s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } #ifdef CONFIG_FB_S3C2410 @@ -235,8 +238,8 @@ static void __init amlm5900_init(void) MACHINE_START(AML_M5900, "AML_M5900") .atag_offset = 0x100, .map_io = amlm5900_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = amlm5900_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index bb595f15ce36..c1fb6c37867f 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -49,6 +49,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/asoc-s3c24xx_simtec.h> +#include <plat/samsung-time.h> #include "anubis.h" #include "common.h" @@ -410,6 +411,7 @@ static void __init anubis_map_io(void) s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* check for the newer revision boards with large page nand */ @@ -443,7 +445,7 @@ MACHINE_START(ANUBIS, "Simtec-Anubis") .atag_offset = 0x100, .map_io = anubis_map_io, .init_machine = anubis_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2440_init_irq, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index b4bc60c78ebb..6dfeeb7ef469 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -48,6 +48,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/mmc-s3cmci.h> +#include <plat/samsung-time.h> #include "common.h" @@ -192,6 +193,7 @@ static void __init at2440evb_map_io(void) s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init at2440evb_init(void) @@ -209,7 +211,7 @@ MACHINE_START(AT2440EVB, "AT2440EVB") .atag_offset = 0x100, .map_io = at2440evb_map_io, .init_machine = at2440evb_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2440_init_irq, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index ca6618081041..22d6ae926d91 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -55,6 +55,7 @@ #include <plat/devs.h> #include <plat/gpio-cfg.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "bast.h" #include "common.h" @@ -576,6 +577,7 @@ static void __init bast_map_io(void) s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init bast_init(void) @@ -603,8 +605,8 @@ MACHINE_START(BAST, "Simtec-BAST") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .atag_offset = 0x100, .map_io = bast_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = bast_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index a25e8c5a7b4c..13d8d073675a 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -81,6 +81,7 @@ #include <plat/gpio-cfg.h> #include <plat/pm.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "common.h" #include "gta02.h" @@ -501,6 +502,7 @@ static void __init gta02_map_io(void) s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } @@ -587,8 +589,8 @@ MACHINE_START(NEO1973_GTA02, "GTA02") /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */ .atag_offset = 0x100, .map_io = gta02_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2442_init_irq, .init_machine = gta02_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index 79bc0830d740..af4334d6b4d5 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -62,7 +62,7 @@ #include <plat/pll.h> #include <plat/pm.h> #include <plat/regs-serial.h> - +#include <plat/samsung-time.h> #include "common.h" #include "h1940.h" @@ -646,6 +646,7 @@ static void __init h1940_map_io(void) s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* setup PM */ @@ -666,11 +667,6 @@ static void __init h1940_reserve(void) memblock_reserve(0x30081000, 0x1000); } -static void __init h1940_init_irq(void) -{ - s3c24xx_init_irq(); -} - static void __init h1940_init(void) { u32 tmp; @@ -739,8 +735,8 @@ MACHINE_START(H1940, "IPAQ-H1940") .atag_offset = 0x100, .map_io = h1940_map_io, .reserve = h1940_reserve, - .init_irq = h1940_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = h1940_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index ca08d7df07f7..a45fcd8ccf79 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -52,6 +52,7 @@ #include <plat/cpu.h> #include <plat/pm.h> #include <linux/platform_data/usb-s3c2410_udc.h> +#include <plat/samsung-time.h> #include "common.h" #include "s3c2412-power.h" @@ -506,6 +507,7 @@ static void __init jive_map_io(void) s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void jive_power_off(void) @@ -658,9 +660,9 @@ MACHINE_START(JIVE, "JIVE") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = jive_map_io, .init_machine = jive_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 2865e5919f2c..a83db46320bc 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -56,6 +56,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include <sound/s3c24xx_uda134x.h> @@ -525,6 +526,7 @@ static void __init mini2440_map_io(void) s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } /* @@ -686,7 +688,7 @@ MACHINE_START(MINI2440, "MINI2440") .atag_offset = 0x100, .map_io = mini2440_map_io, .init_machine = mini2440_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2440_init_irq, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 8017c0fc1729..2cb46c37c920 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -49,6 +49,7 @@ #include <plat/devs.h> #include <linux/platform_data/mmc-s3cmci.h> #include <linux/platform_data/usb-s3c2410_udc.h> +#include <plat/samsung-time.h> #include "common.h" @@ -535,6 +536,7 @@ static void __init n30_map_io(void) n30_hwinit(); s3c24xx_init_clocks(0); s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } /* GPB3 is the line that controls the pull-up for the USB D+ line */ @@ -588,9 +590,9 @@ MACHINE_START(N30, "Acer-N30") Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .init_machine = n30_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .map_io = n30_map_io, .restart = s3c2410_restart, MACHINE_END @@ -599,9 +601,9 @@ MACHINE_START(N35, "Acer-N35") /* Maintainer: Christer Weinigel <christer@weinigel.se> */ .atag_offset = 0x100, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .init_machine = n30_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .map_io = n30_map_io, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index 144b9f80c4a5..01f4354206f9 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -44,6 +44,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" @@ -135,6 +136,7 @@ static void __init nexcoder_map_io(void) s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); nexcoder_sensorboard_init(); } @@ -150,7 +152,7 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") .atag_offset = 0x100, .map_io = nexcoder_map_io, .init_machine = nexcoder_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2440_init_irq, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index ae2cbdf3e3ca..58d6fbe5bf1f 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -45,6 +45,7 @@ #include <plat/devs.h> #include <plat/gpio-cfg.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include <mach/hardware.h> #include <mach/regs-gpio.h> @@ -384,6 +385,7 @@ static void __init osiris_map_io(void) s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* check for the newer revision boards with large page nand */ @@ -424,8 +426,8 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .atag_offset = 0x100, .map_io = osiris_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2440_init_irq, .init_machine = osiris_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index deb0ace585b0..7e16b0740ec1 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -33,6 +33,7 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "common.h" #include "otom.h" @@ -101,6 +102,7 @@ static void __init otom11_map_io(void) s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init otom11_init(void) @@ -114,7 +116,7 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1") .atag_offset = 0x100, .map_io = otom11_map_io, .init_machine = otom11_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2410_init_irq, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 84c541602661..f8feaeadb55a 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -59,6 +59,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pm.h> +#include <plat/samsung-time.h> #include "common.h" #include "common-smdk.h" @@ -304,6 +305,7 @@ static void __init qt2410_map_io(void) s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc)); s3c24xx_init_clocks(12*1000*1000); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init qt2410_machine_init(void) @@ -341,8 +343,8 @@ static void __init qt2410_machine_init(void) MACHINE_START(QT2410, "QT2410") .atag_offset = 0x100, .map_io = qt2410_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = qt2410_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 43f3ac5a1c7a..44ca018e1f96 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -57,6 +57,7 @@ #include <plat/devs.h> #include <plat/pm.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "common.h" #include "h1940.h" @@ -740,6 +741,7 @@ static void __init rx1950_map_io(void) s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc)); s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* setup PM */ @@ -810,8 +812,8 @@ MACHINE_START(RX1950, "HP iPAQ RX1950") .atag_offset = 0x100, .map_io = rx1950_map_io, .reserve = rx1950_reserve, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2442_init_irq, .init_machine = rx1950_init_machine, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index f20418a2fb1b..3bc6231d0a1f 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -49,6 +49,7 @@ #include <plat/devs.h> #include <plat/pm.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "common.h" #include "h1940.h" @@ -179,6 +180,7 @@ static void __init rx3715_map_io(void) s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } /* H1940 and RX3715 need to reserve this for suspend */ @@ -188,11 +190,6 @@ static void __init rx3715_reserve(void) memblock_reserve(0x30081000, 0x1000); } -static void __init rx3715_init_irq(void) -{ - s3c24xx_init_irq(); -} - static void __init rx3715_init_machine(void) { #ifdef CONFIG_PM_H1940 @@ -210,8 +207,8 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .atag_offset = 0x100, .map_io = rx3715_map_io, .reserve = rx3715_reserve, - .init_irq = rx3715_init_irq, + .init_irq = s3c2440_init_irq, .init_machine = rx3715_init_machine, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index cd0b1635c47e..a773789e4f38 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -51,6 +51,7 @@ #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" #include "common-smdk.h" @@ -100,6 +101,7 @@ static void __init smdk2410_map_io(void) s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2410_init(void) @@ -114,8 +116,8 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc /* Maintainer: Jonas Dietsche */ .atag_offset = 0x100, .map_io = smdk2410_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = smdk2410_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index 79485907950f..8146e920f10d 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -44,6 +44,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" #include "common-smdk.h" @@ -105,6 +106,7 @@ static void __init smdk2413_map_io(void) s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2413_machine_init(void) @@ -128,10 +130,10 @@ MACHINE_START(S3C2413, "S3C2413") .atag_offset = 0x100, .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END @@ -140,10 +142,10 @@ MACHINE_START(SMDK2412, "SMDK2412") .atag_offset = 0x100, .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END @@ -152,9 +154,9 @@ MACHINE_START(SMDK2413, "SMDK2413") .atag_offset = 0x100, .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index 037a5da343bd..cb46847c66b4 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -50,6 +50,7 @@ #include <plat/sdhci.h> #include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/s3c-hsudc.h> +#include <plat/samsung-time.h> #include <plat/fb.h> @@ -221,6 +222,7 @@ static void __init smdk2416_map_io(void) s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2416_machine_init(void) @@ -253,6 +255,6 @@ MACHINE_START(SMDK2416, "SMDK2416") .init_irq = s3c2416_init_irq, .map_io = smdk2416_map_io, .init_machine = smdk2416_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2416_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index 29d31314e23c..de2e5d39a847 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -41,6 +41,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" #include "common-smdk.h" @@ -160,6 +161,7 @@ static void __init smdk2440_map_io(void) s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc)); s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2440_machine_init(void) @@ -175,9 +177,9 @@ MACHINE_START(S3C2440, "SMDK2440") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2440_init_irq, .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index b3be4c4dc7bc..9435c3bef18a 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -41,6 +41,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" #include "common-smdk.h" @@ -121,6 +122,7 @@ static void __init smdk2443_map_io(void) s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2443_machine_init(void) @@ -142,6 +144,6 @@ MACHINE_START(SMDK2443, "SMDK2443") .init_irq = s3c2443_init_irq, .map_io = smdk2443_map_io, .init_machine = smdk2443_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2443_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 24b3d79e7b2c..7fad8f055cab 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -53,6 +53,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/map.h> #include <linux/mtd/physmap.h> +#include <plat/samsung-time.h> #include "common.h" @@ -136,6 +137,7 @@ static void __init tct_hammer_map_io(void) s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init tct_hammer_init(void) @@ -147,8 +149,8 @@ static void __init tct_hammer_init(void) MACHINE_START(TCT_HAMMER, "TCT_HAMMER") .atag_offset = 0x100, .map_io = tct_hammer_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = tct_hammer_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index ec42d1e4e465..42e7187fed60 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -45,6 +45,7 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "bast.h" #include "common.h" @@ -332,6 +333,7 @@ static void __init vr1000_map_io(void) s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init vr1000_init(void) @@ -353,7 +355,7 @@ MACHINE_START(VR1000, "Thorcom-VR1000") .atag_offset = 0x100, .map_io = vr1000_map_io, .init_machine = vr1000_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2410_init_irq, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index 239129c2d8bc..b66588428ec9 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -44,6 +44,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" @@ -142,6 +143,7 @@ static void __init vstms_map_io(void) s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init vstms_init(void) @@ -156,9 +158,9 @@ MACHINE_START(VSTMS, "VSTMS") .atag_offset = 0x100, .fixup = vstms_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .init_machine = vstms_init, .map_io = vstms_map_io, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c index 4c4bc1c83b77..d75f95e487ee 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2412.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c @@ -29,6 +29,7 @@ #include <plat/cpu.h> #include <plat/pm.h> +#include <plat/wakeup-mask.h> #include "regs-dsc.h" #include "s3c2412-power.h" @@ -51,8 +52,15 @@ static int s3c2412_cpu_suspend(unsigned long arg) return 1; /* Aborting suspend */ } +/* mapping of interrupts to parts of the wakeup mask */ +static struct samsung_wakeup_mask wake_irqs[] = { + { .irq = IRQ_RTC, .bit = S3C2412_PWRCFG_RTC_MASKIRQ, }, +}; + static void s3c2412_pm_prepare(void) { + samsung_sync_wakemask(S3C2412_PWRCFG, + wake_irqs, ARRAY_SIZE(wake_irqs)); } static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif) |