diff options
| author | Tony Lindgren <tony@atomide.com> | 2007-12-19 07:58:32 +0300 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2008-02-08 21:38:02 +0300 |
| commit | e27a93a944a5ba6a0112750c8243abba86d56e94 (patch) | |
| tree | 2b7e895acd757783501c8689aac34a2b13ac0269 /arch/arm/mach-omap1/board-h2.c | |
| parent | 80dbfde54bfc40c1e39ace7dbb371f095e74665f (diff) | |
| download | linux-e27a93a944a5ba6a0112750c8243abba86d56e94.tar.xz | |
ARM: OMAP1: Misc clean-up
This patch cleans up omap1 files to sync up with linux-omap tree:
- Remove omap-generic MMC config as it should be defined in board-*.c files
instead of using board-generic.c
- New style I2C board_info from David Brownell <dbrownell@users.sourceforge.net>
- Init section fixes from Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/mach-omap1/board-h2.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-h2.c | 48 |
1 files changed, 9 insertions, 39 deletions
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 00b7623b9b0c..070345ee39a5 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -37,6 +37,7 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> +#include <asm/arch/gpio-switch.h> #include <asm/arch/mux.h> #include <asm/arch/tc.h> #include <asm/arch/nand.h> @@ -47,8 +48,6 @@ #include <asm/arch/mcbsp.h> #include <asm/arch/omap-alsa.h> -extern int omap_gpio_init(void); - static int h2_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -341,22 +340,6 @@ static struct platform_device *h2_devices[] __initdata = { &h2_mcbsp1_device, }; -#ifdef CONFIG_I2C_BOARDINFO -static struct i2c_board_info __initdata h2_i2c_board_info[] = { - { - I2C_BOARD_INFO("tps65010", 0x48), - .type = "tps65010", - .irq = OMAP_GPIO_IRQ(58), - }, - /* TODO when driver support is ready: - * - isp1301 OTG transceiver - * - optional ov9640 camera sensor at 0x30 - * - pcf9754 for aGPS control - * - ... etc - */ -}; -#endif - static void __init h2_init_smc91x(void) { if ((omap_request_gpio(0)) < 0) { @@ -365,6 +348,14 @@ static void __init h2_init_smc91x(void) } } +static struct i2c_board_info __initdata h2_i2c_board_info[] = { + { + I2C_BOARD_INFO("isp1301_omap", 0x2d), + .type = "isp1301_omap", + .irq = OMAP_GPIO_IRQ(2), + }, +}; + static void __init h2_init_irq(void) { omap1_init_common_hw(); @@ -461,11 +452,6 @@ static void __init h2_init(void) omap_register_i2c_bus(1, 100, h2_i2c_board_info, ARRAY_SIZE(h2_i2c_board_info)); h2_mmc_init(); - - /* irq for tps65010 chip */ - omap_cfg_reg(W4_GPIO58); - if (gpio_request(58, "tps65010") == 0) - gpio_direction_input(58); } static void __init h2_map_io(void) @@ -473,22 +459,6 @@ static void __init h2_map_io(void) omap1_map_common_io(); } -#ifdef CONFIG_TPS65010 -static int __init h2_tps_init(void) -{ - if (!machine_is_omap_h2()) - return 0; - - /* gpio3 for SD, gpio4 for VDD_DSP */ - /* FIXME send power to DSP iff it's configured */ - - /* Enable LOW_PWR */ - tps65010_set_low_pwr(ON); - return 0; -} -fs_initcall(h2_tps_init); -#endif - MACHINE_START(OMAP_H2, "TI-H2") /* Maintainer: Imre Deak <imre.deak@nokia.com> */ .phys_io = 0xfff00000, |