Merge tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Merge "Samsung DT updates for v3.17" from Kukjin Kim:

exynos3250: add i2s dt for audio interface

exynos4
 - cleanup arm-pmu node because of 4 pmu on
   exynos4412 but 2 pmu on other exynos4 SoCs
 - add support sub-nodes to exynos usb host for exynos4

exynos4412-odroid-common
 - fix T-FLASH hotplug detection
 - disable 'always on' for BUCK8
 - add support for GPIO based buttons
 - add MAX98090 audio codec

exynos4412-odroidx2 and exynos4412-odroidu3
- refactor exynos4412-odroidx and exynos4412-odroid-common
  for odroid-x2 and u2/u3

exynos4412-odroidx
 - add support for USB phy, host and device
 - enable common hardware blocks, secure firmware calls,
   watchdog, g2d and fimc (mem2mem) multimedia accelerators
 - add support for USB phy, host and device
 - correct memory size

exynos5410
 - fill in CPU clock-frequency property to avoid warning

exynos5420
 - remove display pd because of instability

exynos5420-peach-pit and exynos5800-peach-pi
 - sort nodes each other to check its differences easily
 - enable audio support and add sound-card name property
 - add mask-tpm-reset node
 - add cros_ec including keyboard, i2c tunnel and tps65090
   and battery under the i2c tunnel

* tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: Add I2S dt node for exynos3250
  ARM: dts: Add cros_ec to exynos5420-peach-pit and exynos5800-peach-pi
  ARM: dts: clean up arm-pmu node for exynos4
  ARM: dts: remove display power domain for exynos5420
  ARM: dts: Add sound nodes for Odroid-X2/U3 boards
  ARM: dts: fix T-FLASH hotplug detection for exynos4412-odroid-common
  ARM: dts: add support for GPIO buttons for exynos4412-odroid
  ARM: dts: disable 'always on' for BUCK8 regulator for exynos4412-odroid-common
  ARM: dts: refactor Odroid DTS file and add support for Odroid X2 and U2/U3
  ARM: dts: correct memory size for exynos4412-odroidx
  ARM: dts: add support for USB phy, host and device for exynos4412-odroidx
  ARM: dts: enable common hardware blocks for exynos4412-odroidx
  ARM: dts: add port sub-nodes to exynos usb host modules for exynos4
  ARM: dts: Add mask-tpm-reset node in exynos5800-peach-pi
  ARM: dts: Add mask-tpm-reset node in exynos5420-peach-pit
  ARM: dts: Add sound-card name for Snow/Peach-Pit/Peach-Pi
  ARM: dts: Fill in CPU clock-frequency for exynos5410
  ARM: dts: Sort nodes within Peach-pit/Peach-pi dts files
  ARM: dts: Enable audio support for exynos5800-peach-pi

15 files changed, 1106 insertions, 475 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 922fa5c99b2c..81bd72af529e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -66,7 +66,9 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
 	exynos4210-universal_c210.dtb \
+	exynos4412-odroidu3.dtb \
 	exynos4412-odroidx.dtb \
+	exynos4412-odroidx2.dtb \
 	exynos4412-origen.dtb \
 	exynos4412-smdk4412.dtb \
 	exynos4412-tiny4412.dtb \
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 3e678fa335bf..77a06df6dc72 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -425,6 +425,19 @@
 			status = "disabled";
 		};
 
+		i2s2: i2s@13970000 {
+			compatible = "samsung,s3c6410-i2s";
+			reg = <0x13970000 0x100>;
+			interrupts = <0 126 0>;
+			clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0";
+			dmas = <&pdma0 14>, <&pdma0 13>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&i2s2_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
 		pwm: pwm@139D0000 {
 			compatible = "samsung,exynos4210-pwm";
 			reg = <0x139D0000 0x1000>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 17b22e9cc2aa..08ea6dc9a92f 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -123,6 +123,12 @@
 		reg = <0x10440000 0x1000>;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&combiner>;
+		interrupts = <2 2>, <3 2>;
+	};
+
 	sys_reg: syscon@10010000 {
 		compatible = "samsung,exynos4-sysreg", "syscon";
 		reg = <0x10010000 0x400>;
@@ -322,6 +328,23 @@
 		clocks = <&clock CLK_USB_HOST>;
 		clock-names = "usbhost";
 		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+		    reg = <0>;
+		    phys = <&exynos_usbphy 1>;
+		    status = "disabled";
+		};
+		port@1 {
+		    reg = <1>;
+		    phys = <&exynos_usbphy 2>;
+		    status = "disabled";
+		};
+		port@2 {
+		    reg = <2>;
+		    phys = <&exynos_usbphy 3>;
+		    status = "disabled";
+		};
 	};
 
 	ohci@12590000 {
@@ -331,6 +354,13 @@
 		clocks = <&clock CLK_USB_HOST>;
 		clock-names = "usbhost";
 		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+		    reg = <0>;
+		    phys = <&exynos_usbphy 1>;
+		    status = "disabled";
+		};
 	};
 
 	i2s1: i2s@13960000 {
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index ee3001f38821..a4f28e8a6f87 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -93,12 +93,6 @@
 		#clock-cells = <1>;
 	};
 
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupt-parent = <&combiner>;
-		interrupts = <2 2>, <3 2>;
-	};
-
 	pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11400000 0x1000>;
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
new file mode 100644
index 000000000000..6d6d23c83d30
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -0,0 +1,371 @@
+/*
+ * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
+ * device tree source
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/input/input.h>
+#include "exynos4412.dtsi"
+
+/ {
+	firmware@0204F000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0204F000 0x1000>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_power_key>;
+
+		power_key {
+			interrupt-parent = <&gpx1>;
+			interrupts = <3 0>;
+			gpios = <&gpx1 3 1>;
+			linux,code = <KEY_POWER>;
+			label = "power key";
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2s0: i2s@03830000 {
+		pinctrl-0 = <&i2s0_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+		clocks = <&clock_audss EXYNOS_I2S_BUS>,
+			 <&clock_audss EXYNOS_DOUT_AUD_BUS>;
+		clock-names = "iis", "i2s_opclk0";
+	};
+
+	sound: sound {
+		compatible = "samsung,odroidx2-audio";
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&max98090>;
+	};
+
+	mmc@12550000 {
+		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+		pinctrl-names = "default";
+		vmmc-supply = <&ldo20_reg &buck8_reg>;
+		status = "okay";
+
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+		};
+	};
+
+	watchdog@10060000 {
+		status = "okay";
+	};
+
+	rtc@10070000 {
+		status = "okay";
+	};
+
+	g2d@10800000 {
+		status = "okay";
+	};
+
+	camera {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <>;
+
+		fimc_0: fimc@11800000 {
+			status = "okay";
+		};
+
+		fimc_1: fimc@11810000 {
+			status = "okay";
+		};
+
+		fimc_2: fimc@11820000 {
+			status = "okay";
+		};
+
+		fimc_3: fimc@11830000 {
+			status = "okay";
+		};
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		pinctrl-names = "default";
+		vmmc-supply = <&ldo4_reg &ldo21_reg>;
+		cd-gpios = <&gpk2 2 0>;
+		cd-inverted;
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	i2c@13860000 {
+		pinctrl-0 = <&i2c0_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		usb3503: usb3503@08 {
+			compatible = "smsc,usb3503";
+			reg = <0x08>;
+
+			intn-gpios = <&gpx3 0 0>;
+			connect-gpios = <&gpx3 4 0>;
+			reset-gpios = <&gpx3 5 0>;
+			initial-mode = <1>;
+		};
+
+		max77686: pmic@09 {
+			compatible = "maxim,max77686";
+			reg = <0x09>;
+			#clock-cells = <1>;
+
+			voltage-regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "VDD_ALIVE_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "VDDQ_M1_2_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VDDQ_EXT_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VDDQ_MMC2_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VDDQ_MMC1_3_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VDD10_MPLL_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VDD10_XPLL_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "VDD18_ABB1_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "VDD33_USB_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "VDDQ_C2C_W_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "VDD18_ABB0_2_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "VDD10_HSIC_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VDD18_HSIC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo20_reg: LDO20 {
+					regulator-name = "LDO20_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+				};
+
+				ldo21_reg: LDO21 {
+					regulator-name = "LDO21_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo25_reg: LDO25 {
+					regulator-name = "VDDQ_LCD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-microvolt-offset = <50000>;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "VDDQ_CKEM1_2_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "BUCK6_1.35V";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "BUCK7_2.0V";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-always-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "BUCK8_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+			};
+		};
+	};
+
+	i2c@13870000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_bus>;
+		status = "okay";
+		max98090: max98090@10 {
+			compatible = "maxim,max98090";
+			reg = <0x10>;
+			interrupt-parent = <&gpx0>;
+			interrupts = <0 0>;
+		};
+	};
+
+	exynos-usbphy@125B0000 {
+		status = "okay";
+	};
+
+	hsotg@12480000 {
+		status = "okay";
+		vusb_d-supply = <&ldo15_reg>;
+		vusb_a-supply = <&ldo12_reg>;
+	};
+
+	ehci: ehci@12580000 {
+		status = "okay";
+	};
+};
+
+&pinctrl_1 {
+	gpio_power_key: power_key {
+		samsung,pins = "gpx1-3";
+		samsung,pin-pud = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
new file mode 100644
index 000000000000..c8a64be55d07
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -0,0 +1,61 @@
+/*
+ * Hardkernel's Exynos4412 based ODROID-U3 board device tree source
+ *
+ * Copyright (c) 2014 Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-U3 board which is based
+ * on Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4412-odroid-common.dtsi"
+
+/ {
+	model = "Hardkernel ODROID-U3 board based on Exynos4412";
+	compatible = "hardkernel,odroid-u3", "samsung,exynos4412", "samsung,exynos4";
+
+	memory {
+		reg = <0x40000000 0x7FF00000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "led1:heart";
+			gpios = <&gpc1 0 1>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&usb3503 {
+	clock-names = "refclk";
+	clocks = <&pmu_system_controller 0>;
+	refclk-frequency = <24000000>;
+};
+
+&ehci {
+	port@1 {
+		status = "okay";
+	};
+	port@2 {
+		status = "okay";
+	};
+};
+
+&sound {
+	compatible = "samsung,odroidu3-audio";
+	samsung,model = "Odroid-U3";
+	samsung,audio-routing =
+		"Headphone Jack", "HPL",
+		"Headphone Jack", "HPR",
+		"Headphone Jack", "MICBIAS",
+		"IN1", "Headphone Jack",
+		"Speakers", "SPKL",
+		"Speakers", "SPKR";
+};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 31db28a4bb33..cb1cfe7239c4 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -3,8 +3,8 @@
  *
  * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
  *
- * Device tree source file for Hardkernel's ODROID-X board which is based on
- * Samsung's Exynos4412 SoC.
+ * Device tree source file for Hardkernel's ODROID-X board which is based
+ * on Samsung's Exynos4412 SoC.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -12,14 +12,14 @@
 */
 
 /dts-v1/;
-#include "exynos4412.dtsi"
+#include "exynos4412-odroid-common.dtsi"
 
 / {
 	model = "Hardkernel ODROID-X board based on Exynos4412";
 	compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4";
 
 	memory {
-		reg = <0x40000000 0x40000000>;
+		reg = <0x40000000 0x3FF00000>;
 	};
 
 	leds {
@@ -38,23 +38,25 @@
 		};
 	};
 
-	mmc@12550000 {
-		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
-		pinctrl-names = "default";
-		vmmc-supply = <&ldo20_reg &buck8_reg>;
+	serial@13820000 {
 		status = "okay";
+	};
 
-		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
+	serial@13830000 {
+		status = "okay";
+	};
 
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
+	gpio_keys {
+		pinctrl-0 = <&gpio_power_key &gpio_home_key>;
+
+		home_key {
+			interrupt-parent = <&gpx2>;
+			interrupts = <2 0>;
+			gpios = <&gpx2 2 0>;
+			linux,code = <KEY_HOME>;
+			label = "home key";
+			debounce-interval = <10>;
+			gpio-key,wakeup;
 		};
 	};
 
@@ -65,242 +67,19 @@
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpa1 1 1>;
 		enable-active-high;
-		regulator-boot-on;
-	};
-
-	rtc@10070000 {
-		status = "okay";
-	};
-
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-		pinctrl-names = "default";
-		vmmc-supply = <&ldo4_reg &ldo21_reg>;
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
+		regulator-always-on;
 	};
+};
 
-	serial@13830000 {
+&ehci {
+	port@1 {
 		status = "okay";
 	};
+};
 
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	i2c@13860000 {
-		pinctrl-0 = <&i2c0_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		max77686: pmic@09 {
-			compatible = "maxim,max77686";
-			reg = <0x09>;
-			#clock-cells = <1>;
-
-			voltage-regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "VDD_ALIVE_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "VDDQ_M1_2_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VDDQ_EXT_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VDDQ_MMC2_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VDDQ_MMC1_3_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "VDD10_MPLL_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VDD10_XPLL_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "VDD18_ABB1_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "VDD33_USB_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "VDDQ_C2C_W_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "VDD18_ABB0_2_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "VDD10_HSIC_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "VDD18_HSIC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo20_reg: LDO20 {
-					regulator-name = "LDO20_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-boot-on;
-				};
-
-				ldo21_reg: LDO21 {
-					regulator-name = "LDO21_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo25_reg: LDO25 {
-					regulator-name = "VDDQ_LCD_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-microvolt-offset = <50000>;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "VDDQ_CKEM1_2_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck6_reg: BUCK6 {
-					regulator-name = "BUCK6_1.35V";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck7_reg: BUCK7 {
-					regulator-name = "BUCK7_2.0V";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					regulator-always-on;
-				};
-
-				buck8_reg: BUCK8 {
-					regulator-name = "BUCK8_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-			};
-		};
+&pinctrl_1 {
+	gpio_home_key: home_key {
+		samsung,pins = "gpx2-2";
+		samsung,pin-pud = <0>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts
new file mode 100644
index 000000000000..96b43f4497cc
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts
@@ -0,0 +1,32 @@
+/*
+ * Hardkernel's Exynos4412 based ODROID-X2 board device tree source
+ *
+ * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-X2 board which is based
+ * on Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "exynos4412-odroidx.dts"
+
+/ {
+	model = "Hardkernel ODROID-X2 board based on Exynos4412";
+	compatible = "hardkernel,odroid-x2", "samsung,exynos4412", "samsung,exynos4";
+
+	memory {
+		reg = <0x40000000 0x7FF00000>;
+	};
+};
+
+&sound {
+	samsung,model = "Odroid-X2";
+	samsung,audio-routing =
+		"Headphone Jack", "HPL",
+		"Headphone Jack", "HPR",
+		"IN1", "Mic Jack",
+		"Mic Jack", "MICBIAS";
+};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index c42a3e196cd5..d8bc059e172f 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -26,6 +26,10 @@
 		samsung,combiner-nr = <20>;
 	};
 
+	pmu {
+		interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
+	};
+
 	gic: interrupt-controller@10490000 {
 		cpu-offset = <0x4000>;
 	};
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index c5a943df1cd7..95cdfb9e7d59 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -31,12 +31,6 @@
 		mshc0 = &mshc_0;
 	};
 
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupt-parent = <&combiner>;
-		interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
-	};
-
 	sysram@02020000 {
 		compatible = "mmio-sram";
 		reg = <0x02020000 0x40000>;
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 7bd2df1364c2..c682c8831172 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -262,6 +262,7 @@
 	sound {
 		compatible = "google,snow-audio-max98095";
 
+		samsung,model = "Snow-I2S-MAX98095";
 		samsung,i2s-controller = <&i2s0>;
 		samsung,audio-codec = <&max98095>;
 	};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 3839c26f467f..9d0b8cc1409c 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -28,24 +28,28 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x0>;
+			clock-frequency = <1600000000>;
 		};
 
 		CPU1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x1>;
+			clock-frequency = <1600000000>;
 		};
 
 		CPU2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x2>;
+			clock-frequency = <1600000000>;
 		};
 
 		CPU3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x3>;
+			clock-frequency = <1600000000>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 1c5b8f9f4a36..228a6b1e0aa1 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -25,8 +25,18 @@
 		"google,pit", "google,peach","samsung,exynos5420",
 		"samsung,exynos5";
 
-	memory {
-		reg = <0x20000000 0x80000000>;
+	aliases {
+		/* Assign 20 so we don't get confused w/ builtin ones */
+		i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
 	};
 
 	fixed-rate-clocks {
@@ -50,18 +60,14 @@
 		};
 	};
 
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 1000000 0>;
-		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
-		default-brightness-level = <7>;
-		pinctrl-0 = <&pwm0_out>;
-		pinctrl-names = "default";
+	memory {
+		reg = <0x20000000 0x80000000>;
 	};
 
 	sound {
 		compatible = "google,snow-audio-max98090";
 
+		samsung,model = "Peach-Pit-I2S-MAX98090";
 		samsung,i2s-controller = <&i2s0>;
 		samsung,audio-codec = <&max98090>;
 	};
@@ -87,66 +93,92 @@
 		pinctrl-0 = <&usb301_vbus_en>;
 		enable-active-high;
 	};
-};
 
-&pinctrl_0 {
-	max98090_irq: max98090-irq {
-		samsung,pins = "gpx0-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+	vbat: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat-supply";
+		regulator-boot-on;
+		regulator-always-on;
 	};
+};
 
-	tpm_irq: tpm-irq {
-		samsung,pins = "gpx1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd_gpio>;
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x06>;
+	samsung,lane-count = <2>;
+	samsung,hpd-gpio = <&gpx2 6 0>;
 
-	power_key_irq: power-key-irq {
-		samsung,pins = "gpx1-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
+	display-timings {
+		native-mode = <&timing1>;
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		timing1: timing@1 {
+			clock-frequency = <70589280>;
+			hactive = <1366>;
+			vactive = <768>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			hsync-len = <32>;
+			vback-porch = <10>;
+			vfront-porch = <12>;
+			vsync-len = <6>;
+		};
 	};
+};
 
-	dp_hpd_gpio: dp_hpd_gpio {
-		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
 };
 
-&pinctrl_3 {
-	usb300_vbus_en: usb300-vbus-en {
-		samsung,pins = "gph0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+&hdmi {
+	status = "okay";
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	ddc = <&i2c_2>;
+};
+
+&hsi2c_7 {
+	status = "okay";
+
+	max98090: codec@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupts = <2 0>;
+		interrupt-parent = <&gpx0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max98090_irq>;
 	};
+};
 
-	usb301_vbus_en: usb301-vbus-en {
-		samsung,pins = "gph0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+&hsi2c_9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+
+		/* Unused irq; but still need to configure the pins */
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpm_irq>;
 	};
 };
 
-&rtc {
+&i2c_2 {
 	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	samsung,i2c-slave-addr = <0x50>;
 };
 
-&uart_3 {
+&i2s0 {
 	status = "okay";
 };
 
@@ -189,46 +221,210 @@
 	};
 };
 
-&hsi2c_7 {
-	status = "okay";
 
-	max98090: codec@10 {
-		compatible = "maxim,max98090";
-		reg = <0x10>;
-		interrupts = <2 0>;
-		interrupt-parent = <&gpx0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max98090_irq>;
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mask_tpm_reset>;
+
+	max98090_irq: max98090-irq {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	/* We need GPX0_6 to be low at sleep time; just keep it low always */
+	mask_tpm_reset: mask-tpm-reset {
+		samsung,pins = "gpx0-6";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+		samsung,pin-val = <0>;
+	};
+
+	tpm_irq: tpm-irq {
+		samsung,pins = "gpx1-0";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	tps65090_irq: tps65090-irq {
+		samsung,pins = "gpx2-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	dp_hpd_gpio: dp_hpd_gpio {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
 	};
 };
 
-&hsi2c_9 {
-	status = "okay";
-	clock-frequency = <400000>;
+&pinctrl_3 {
+	/* Drive SPI lines at x2 for better integrity */
+	spi2-bus {
+		samsung,pin-drv = <2>;
+	};
 
-	tpm@20 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x20>;
+	/* Drive SPI chip select at x2 for better integrity */
+	ec_spi_cs: ec-spi-cs {
+		samsung,pins = "gpb1-2";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
 
-		/* Unused irq; but still need to configure the pins */
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpm_irq>;
+	usb300_vbus_en: usb300-vbus-en {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb301_vbus_en: usb301-vbus-en {
+		samsung,pins = "gph0-1";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
 	};
 };
 
-&i2c_2	{
+&rtc {
 	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-	samsung,i2c-slave-addr = <0x50>;
 };
 
-&hdmi {
+&spi_2 {
+	status = "okay";
+	num-cs = <1>;
+	samsung,spi-src-clk = <0>;
+	cs-gpios = <&gpb1 2 0>;
+
+	cros_ec: cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+		interrupt-parent = <&gpx1>;
+		interrupts = <5 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_spi_cs &ec_irq>;
+		reg = <0>;
+		spi-max-frequency = <3125000>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <1>;
+		};
+
+		i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			google,remote-bus = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+				sbs,i2c-retry-count = <2>;
+			};
+
+			power-regulator@48 {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				/*
+				 * Config irq to disable internal pulls
+				 * even though we run in polling mode.
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&tps65090_irq>;
+
+				vsys1-supply = <&vbat>;
+				vsys2-supply = <&vbat>;
+				vsys3-supply = <&vbat>;
+				infet1-supply = <&vbat>;
+				infet2-supply = <&vbat>;
+				infet3-supply = <&vbat>;
+				infet4-supply = <&vbat>;
+				infet5-supply = <&vbat>;
+				infet6-supply = <&vbat>;
+				infet7-supply = <&vbat>;
+				vsys-l1-supply = <&vbat>;
+				vsys-l2-supply = <&vbat>;
+
+				regulators {
+					tps65090_dcdc1: dcdc1 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc2: dcdc2 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc3: dcdc3 {
+						ti,enable-ext-control;
+					};
+					tps65090_fet1: fet1 {
+						regulator-name = "vcd_led";
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+					};
+					tps65090_fet3: fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+					};
+					tps65090_fet4: fet4 {
+						regulator-name = "sdcard";
+						regulator-always-on;
+					};
+					tps65090_fet5: fet5 {
+						regulator-name = "camout";
+					};
+					tps65090_fet6: fet6 {
+						regulator-name = "lcd_vdd";
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+					};
+					tps65090_ldo1: ldo1 {
+					};
+					tps65090_ldo2: ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+};
+
+&uart_3 {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-	ddc = <&i2c_2>;
 };
 
 &usbdrd_phy0 {
@@ -248,40 +444,4 @@
 	timeout-sec = <32>;
 };
 
-&i2s0 {
-	status = "okay";
-};
-
-&fimd {
-	status = "okay";
-	samsung,invert-vclk;
-};
-
-&dp {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dp_hpd_gpio>;
-	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x06>;
-	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx2 6 0>;
-
-	display-timings {
-		native-mode = <&timing1>;
-
-		timing1: timing@1 {
-			clock-frequency = <70589280>;
-			hactive = <1366>;
-			vactive = <768>;
-			hfront-porch = <40>;
-			hback-porch = <40>;
-			hsync-len = <32>;
-			vback-porch = <10>;
-			vfront-porch = <12>;
-			vsync-len = <6>;
-		};
-	};
-};
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 15957227ffda..b69de2661011 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -265,11 +265,6 @@
 		clock-names = "oscclk", "pclk0", "clk0";
 	};
 
-	disp_pd: power-domain@100440C0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x100440C0 0x20>;
-	};
-
 	msc_pd: power-domain@10044120 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044120 0x20>;
@@ -521,7 +516,6 @@
 	};
 
 	fimd: fimd@14400000 {
-		samsung,power-domain = <&disp_pd>;
 		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 		clock-names = "sclk_fimd", "fimd";
 	};
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index f3af2079a063..f3ee48bbe05f 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -23,8 +23,18 @@
 		"google,pi", "google,peach", "samsung,exynos5800",
 		"samsung,exynos5";
 
-	memory {
-		reg = <0x20000000 0x80000000>;
+	aliases {
+		/* Assign 20 so we don't get confused w/ builtin ones */
+		i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
 	};
 
 	fixed-rate-clocks {
@@ -48,13 +58,16 @@
 		};
 	};
 
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 1000000 0>;
-		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
-		default-brightness-level = <7>;
-		pinctrl-0 = <&pwm0_out>;
-		pinctrl-names = "default";
+	memory {
+		reg = <0x20000000 0x80000000>;
+	};
+
+	sound {
+		compatible = "google,snow-audio-max98091";
+
+		samsung,model = "Peach-Pi-I2S-MAX98091";
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&max98091>;
 	};
 
 	usb300_vbus_reg: regulator-usb300 {
@@ -78,59 +91,92 @@
 		pinctrl-0 = <&usb301_vbus_en>;
 		enable-active-high;
 	};
-};
 
-&pinctrl_0 {
-	tpm_irq: tpm-irq {
-		samsung,pins = "gpx1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+	vbat: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat-supply";
+		regulator-boot-on;
+		regulator-always-on;
 	};
+};
 
-	power_key_irq: power-key-irq {
-		samsung,pins = "gpx1-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd_gpio>;
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <2>;
+	samsung,hpd-gpio = <&gpx2 6 0>;
 
-	dp_hpd_gpio: dp_hpd_gpio {
-		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
+	display-timings {
+		native-mode = <&timing1>;
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		timing1: timing@1 {
+			clock-frequency = <150660000>;
+			hactive = <1920>;
+			vactive = <1080>;
+			hfront-porch = <60>;
+			hback-porch = <172>;
+			hsync-len = <80>;
+			vback-porch = <25>;
+			vfront-porch = <10>;
+			vsync-len = <10>;
+		};
 	};
 };
 
-&pinctrl_3 {
-	usb300_vbus_en: usb300-vbus-en {
-		samsung,pins = "gph0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hdmi {
+	status = "okay";
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	ddc = <&i2c_2>;
+};
+
+&hsi2c_7 {
+	status = "okay";
+
+	max98091: codec@10 {
+		compatible = "maxim,max98091";
+		reg = <0x10>;
+		interrupts = <2 0>;
+		interrupt-parent = <&gpx0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max98091_irq>;
 	};
+};
 
-	usb301_vbus_en: usb301-vbus-en {
-		samsung,pins = "gph0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+&hsi2c_9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+
+		/* Unused irq; but still need to configure the pins */
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpm_irq>;
 	};
 };
 
-&rtc {
+&i2c_2 {
 	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	samsung,i2c-slave-addr = <0x50>;
 };
 
-&uart_3 {
+&i2s0 {
 	status = "okay";
 };
 
@@ -173,66 +219,210 @@
 	};
 };
 
-&dp {
-	status = "okay";
+
+&pinctrl_0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&dp_hpd_gpio>;
-	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx2 6 0>;
+	pinctrl-0 = <&mask_tpm_reset>;
 
-	display-timings {
-		native-mode = <&timing1>;
+	max98091_irq: max98091-irq {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
 
-		timing1: timing@1 {
-			clock-frequency = <150660000>;
-			hactive = <1920>;
-			vactive = <1080>;
-			hfront-porch = <60>;
-			hback-porch = <172>;
-			hsync-len = <80>;
-			vback-porch = <25>;
-			vfront-porch = <10>;
-			vsync-len = <10>;
-		};
+	/* We need GPX0_6 to be low at sleep time; just keep it low always */
+	mask_tpm_reset: mask-tpm-reset {
+		samsung,pins = "gpx0-6";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+		samsung,pin-val = <0>;
 	};
-};
 
-&fimd {
-	status = "okay";
-	samsung,invert-vclk;
+	tpm_irq: tpm-irq {
+		samsung,pins = "gpx1-0";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	tps65090_irq: tps65090-irq {
+		samsung,pins = "gpx2-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	dp_hpd_gpio: dp_hpd_gpio {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
 };
 
-&hsi2c_9 {
-	status = "okay";
-	clock-frequency = <400000>;
+&pinctrl_3 {
+	/* Drive SPI lines at x2 for better integrity */
+	spi2-bus {
+		samsung,pin-drv = <2>;
+	};
 
-	tpm@20 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x20>;
-		/* Unused irq; but still need to configure the pins */
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpm_irq>;
+	/* Drive SPI chip select at x2 for better integrity */
+	ec_spi_cs: ec-spi-cs {
+		samsung,pins = "gpb1-2";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
+	usb300_vbus_en: usb300-vbus-en {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb301_vbus_en: usb301-vbus-en {
+		samsung,pins = "gph0-1";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
 	};
 };
 
-&i2c_2 {
+&rtc {
 	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-	samsung,i2c-slave-addr = <0x50>;
 };
 
-&hdmi {
+&spi_2 {
+	status = "okay";
+	num-cs = <1>;
+	samsung,spi-src-clk = <0>;
+	cs-gpios = <&gpb1 2 0>;
+
+	cros_ec: cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+		interrupt-parent = <&gpx1>;
+		interrupts = <5 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_spi_cs &ec_irq>;
+		reg = <0>;
+		spi-max-frequency = <3125000>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <1>;
+		};
+
+		i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			google,remote-bus = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+				sbs,i2c-retry-count = <2>;
+			};
+
+			power-regulator@48 {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				/*
+				 * Config irq to disable internal pulls
+				 * even though we run in polling mode.
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&tps65090_irq>;
+
+				vsys1-supply = <&vbat>;
+				vsys2-supply = <&vbat>;
+				vsys3-supply = <&vbat>;
+				infet1-supply = <&vbat>;
+				infet2-supply = <&vbat>;
+				infet3-supply = <&vbat>;
+				infet4-supply = <&vbat>;
+				infet5-supply = <&vbat>;
+				infet6-supply = <&vbat>;
+				infet7-supply = <&vbat>;
+				vsys-l1-supply = <&vbat>;
+				vsys-l2-supply = <&vbat>;
+
+				regulators {
+					tps65090_dcdc1: dcdc1 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc2: dcdc2 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc3: dcdc3 {
+						ti,enable-ext-control;
+					};
+					tps65090_fet1: fet1 {
+						regulator-name = "vcd_led";
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+					};
+					tps65090_fet3: fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+					};
+					tps65090_fet4: fet4 {
+						regulator-name = "sdcard";
+						regulator-always-on;
+					};
+					tps65090_fet5: fet5 {
+						regulator-name = "camout";
+					};
+					tps65090_fet6: fet6 {
+						regulator-name = "lcd_vdd";
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+					};
+					tps65090_ldo1: ldo1 {
+					};
+					tps65090_ldo2: ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+};
+
+&uart_3 {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-	ddc = <&i2c_2>;
 };
 
 &usbdrd_phy0 {
@@ -251,3 +441,5 @@
 &watchdog {
 	timeout-sec = <32>;
 };
+
+#include "cros-ec-keyboard.dtsi"