diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-10-09 01:22:23 +0400 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-10-09 01:22:23 +0400 |
| commit | eb785bef684f2b7d03b530efc8e6f199e9777e2f (patch) | |
| tree | e43c96f5fb5fafe59a680da792d2d182e2270fb2 /arch/arm/boot/dts | |
| parent | cf377ad7d42c566356d79049536d9cb37499cb77 (diff) | |
| parent | ee48874d4aa50d9c4921b44a38dc33110b90638b (diff) | |
| download | linux-eb785bef684f2b7d03b530efc8e6f199e9777e2f.tar.xz | |
Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC DT updates from Arnd Bergmann:
"As usual, this is the largest branch, though this time a little under
half of the total changes with 307 individual non-merge changesets.
The largest changes are the addition of new machines, in particular
the Tegra based Chromebook, the Renesas r8a7794 SoC, and DT support
for the old i.MX1 platform.
Other changes include
- at91: various sam9 and sama5 updates
- exynos: much extended Peach Pi/Pit (Chromebook 2) support
- keystone: new peripherals
- meson: added DT for meson6 SoC
- mvebu: new device support for Armada 370/375
- qcom: improved support for IPQ8064 and MSM8x60
- rockchip: much improved support for rk3288
- shmobile: lots of updates all over the place
- sunxi: dts license change
- sunxi: more a23 device support
- vexpress: CLCD DT description"
* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (308 commits)
ARM: DTS: meson: update DTSI to add watchdog node
ARM: dts: keystone-k2l: fix mdio io start address
ARM: dts: keystone-k2e: fix mdio io start address
ARM: dts: keystone-k2e: update usb1 node for dma properties
ARM: dts: keystone: fix io range for usb_phy0
Revert "Merge tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi into next/dt"
Revert "ARM: dts: hix5hd2: add wdg node"
ARM: dts: add rk3288 i2s controller
ARM: vexpress: Add CLCD Device Tree properties
ARM: bcm2835: add I2S pinctrl to device tree
ARM: meson: documentation: add bindings documentation
ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS
ARM: dts: mt6589: Change compatible string for GIC
ARM: dts: mediatek: Add compatible property for aquaris5
ARM: dts: mt6589-aquaris5: Add boot argument earlyprintk
ARM: dts: mt6589: Fix typo in GIC unit address
ARM: dts: Build dtb for Mediatek board
ARM: dts: keystone: fix bindings for pcie and usb clock nodes
ARM: dts: keystone: k2l: Fix chip selects for SPI devices
ARM: dts: keystone: add dsp gpio controllers nodes
...
Diffstat (limited to 'arch/arm/boot/dts')
193 files changed, 11238 insertions, 1717 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d3e687ecfc95..7c80af906897 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -163,8 +163,11 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \ kirkwood-ts419-6282.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb +dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb dtb-$(CONFIG_ARCH_MXC) += \ + imx1-ads.dtb \ + imx1-apf9328.dtb \ imx25-eukrea-mbimxsd25-baseboard.dtb \ imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \ imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \ @@ -203,6 +206,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6dl-gw52xx.dtb \ imx6dl-gw53xx.dtb \ imx6dl-gw54xx.dtb \ + imx6dl-gw552x.dtb \ imx6dl-hummingboard.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-pbab01.dtb \ @@ -227,6 +231,8 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-gw53xx.dtb \ imx6q-gw5400-a.dtb \ imx6q-gw54xx.dtb \ + imx6q-gw552x.dtb \ + imx6q-hummingboard.dtb \ imx6q-nitrogen6x.dtb \ imx6q-phytec-pbab01.dtb \ imx6q-rex-pro.dtb \ @@ -244,7 +250,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-tx6q-1110.dtb \ imx6sl-evk.dtb \ imx6sx-sdb.dtb \ - vf610-colibri.dtb \ + vf610-colibri-eval-v3.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ @@ -290,7 +296,11 @@ dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \ omap3-devkit8000.dtb \ omap3-evm.dtb \ omap3-evm-37xx.dtb \ - omap3-gta04.dtb \ + omap3-gta04a3.dtb \ + omap3-gta04a4.dtb \ + omap3-gta04a5.dtb \ + omap3-ha.dtb \ + omap3-ha-lcd.dtb \ omap3-igep0020.dtb \ omap3-igep0030.dtb \ omap3-ldp.dtb \ @@ -313,6 +323,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \ omap3-sbc-t3517.dtb \ omap3-sbc-t3530.dtb \ omap3-sbc-t3730.dtb \ + omap3-thunder.dtb \ omap3-zoom3.dtb dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \ am335x-bone.dtb \ @@ -345,7 +356,9 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-ifc6410.dtb \ qcom-apq8074-dragonboard.dtb \ + qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ + qcom-ipq8064-ap148.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ @@ -379,7 +392,8 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ r8a7790-lager.dtb \ - r8a7779-marzen.dtb + r8a7779-marzen.dtb \ + r8a7794-alt.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_sockit.dtb \ @@ -410,6 +424,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ + sun5i-a13-hsg-h702.dtb \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb dtb-$(CONFIG_MACH_SUN6I) += \ @@ -420,7 +435,9 @@ dtb-$(CONFIG_MACH_SUN6I) += \ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ + sun7i-a20-hummingbird.dtb \ sun7i-a20-i12-tvbox.dtb \ + sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-pcduino3.dtb dtb-$(CONFIG_MACH_SUN8I) += \ @@ -444,6 +461,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra114-roth.dtb \ tegra114-tn7.dtb \ tegra124-jetson-tk1.dtb \ + tegra124-nyan-big.dtb \ tegra124-venice2.dtb dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ @@ -495,6 +513,7 @@ dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \ dove-d2plug.dtb \ dove-d3plug.dtb \ dove-dove-db.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb targets += dtbs dtbs_install targets += $(dtb-y) diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index d9d98697cca9..6cc25ed912ee 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -224,6 +224,7 @@ &tps { regulators { dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; regulator-always-on; }; @@ -246,18 +247,22 @@ }; ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; regulator-always-on; }; ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; regulator-always-on; }; ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; regulator-always-on; }; ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; regulator-always-on; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index c8238c467acf..9e7d45571cd5 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -354,6 +354,10 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; + mbox_wkupm3: wkup_m3 { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + }; }; timer1: timer@44e31000 { diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 24531de979f2..46660ffd2b65 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -58,10 +58,12 @@ }; am43xx_pinmux: pinmux@44e10800 { - compatible = "pinctrl-single"; + compatible = "ti,am437-padconf", "pinctrl-single"; reg = <0x44e10800 0x31c>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; }; @@ -168,6 +170,10 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; + mbox_wkupm3: wkup_m3 { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + }; }; timer1: timer@44e31000 { diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 416f4e5a69c1..a495e5821ab8 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -43,6 +43,8 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { reg = <0>; }; @@ -53,11 +55,15 @@ }; ethernet@70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 097df7d8f0f6..2b6d24e0d1e8 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -91,6 +91,8 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { reg = <0>; }; @@ -100,11 +102,15 @@ }; }; ethernet@70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 285524fb915e..3aebd93cc33c 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -101,12 +101,16 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { /* Marvell 88E1318 */ reg = <0>; }; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; @@ -122,7 +126,7 @@ status = "okay"; isl12057: isl12057@68 { - compatible = "isl,isl12057"; + compatible = "isil,isl12057"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 4ec1ce561d34..c2f414bb9aba 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -86,6 +86,8 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { /* Marvell 88E1318 */ reg = <0>; }; @@ -96,12 +98,16 @@ }; ethernet@70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; @@ -117,7 +123,7 @@ status = "okay"; isl12057: isl12057@68 { - compatible = "isl,isl12057"; + compatible = "isil,isl12057"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 4169f4096ea3..f57a8f841498 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -9,6 +9,15 @@ * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. */ /dts-v1/; @@ -30,7 +39,7 @@ }; soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; pcie-controller { @@ -50,6 +59,18 @@ }; internal-regs { + pinctrl { + fan_pins: fan-pins { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + + led_pins: led-pins { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + }; + serial@12000 { status = "okay"; }; @@ -59,6 +80,8 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { reg = <0>; }; @@ -74,6 +97,8 @@ phy-mode = "sgmii"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; @@ -106,6 +131,26 @@ }; }; + gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0 3000 1>; + pinctrl-0 = <&fan_pins>; + pinctrl-names = "default"; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + sw_led { + label = "370rd:green:sw"; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; + nand@d0000 { status = "okay"; num-cs = <1>; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 23227e0027ec..83286ec9702c 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -110,7 +110,7 @@ }; spi0: spi@10600 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-370-spi", "marvell,orion-spi"; reg = <0x10600 0x28>; #address-cells = <1>; #size-cells = <0>; @@ -121,7 +121,7 @@ }; spi1: spi@10680 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-370-spi", "marvell,orion-spi"; reg = <0x10680 0x28>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 21b588b6f6bd..6b3c23b1e138 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -151,6 +151,25 @@ "mpp62", "mpp60", "mpp58"; marvell,function = "audio"; }; + + mdio_pins: mdio-pins { + marvell,pins = "mpp17", "mpp18"; + marvell,function = "ge"; + }; + + ge0_rgmii_pins: ge0-rgmii-pins { + marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11", "mpp12", + "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "ge0"; + }; + + ge1_rgmii_pins: ge1-rgmii-pins { + marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27", "mpp28", "mpp29", "mpp30"; + marvell,function = "ge1"; + }; }; gpio0: gpio@18100 { @@ -206,6 +225,10 @@ status = "okay"; }; + sscg@18330 { + reg = <0x18330 0x4>; + }; + interrupt-controller@20000 { reg = <0x20a00 0x1d0>, <0x21870 0x58>; }; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index c1e49e7bf0fa..de6571445cef 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -185,6 +185,12 @@ }; }; + rtc@10300 { + compatible = "marvell,orion-rtc"; + reg = <0x10300 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + }; + spi0: spi@10600 { compatible = "marvell,orion-spi"; reg = <0x10600 0x50>; diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index c5ed85a70ed9..7d8f32873e82 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -174,7 +174,7 @@ status = "okay"; isl12057: isl12057@68 { - compatible = "isl,isl12057"; + compatible = "isil,isl12057"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 5e95a8053445..d68b3c4862bc 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -345,10 +345,14 @@ }; }; - ramc: ramc@ffffe200 { + ramc0: ramc@ffffe200 { compatible = "atmel,at91sam9260-sdramc"; - reg = <0xffffe200 0x200 - 0xffffe800 0x200>; + reg = <0xffffe200 0x200>; + }; + + ramc1: ramc@ffffe800 { + compatible = "atmel,at91sam9260-sdramc"; + reg = <0xffffe800 0x200>; }; pit: timer@fffffd30 { diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 4e0abbd9d655..a50ee587a7af 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -22,6 +22,10 @@ compatible = "atmel,at91sam9g20-i2c"; }; + ssc0: ssc@fffbc000 { + compatible = "atmel,at91sam9rl-ssc"; + }; + adc0: adc@fffe0000 { atmel,adc-startup-time = <40>; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 932a669156af..d3f65130a1f8 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -96,8 +96,14 @@ ramc0: ramc@ffffe400 { compatible = "atmel,at91sam9g45-ddramc"; - reg = <0xffffe400 0x200 - 0xffffe600 0x200>; + reg = <0xffffe400 0x200>; + clocks = <&ddrck>; + clock-names = "ddrck"; + }; + + ramc1: ramc@ffffe600 { + compatible = "atmel,at91sam9g45-ddramc"; + reg = <0xffffe600 0x200>; clocks = <&ddrck>; clock-names = "ddrck"; }; @@ -159,7 +165,7 @@ compatible = "atmel,at91rm9200-clk-master"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; atmel,clk-output-range = <0 133333333>; atmel,clk-divisors = <1 2 4 3>; }; @@ -175,7 +181,7 @@ #address-cells = <1>; #size-cells = <0>; interrupt-parent = <&pmc>; - clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>, <&mck>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; prog0: prog0 { #clock-cells = <0>; @@ -1159,6 +1165,39 @@ atmel,can-isoc; }; }; + + sckc@fffffd50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffd50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <1200000>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <75>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; + + rtc@fffffdb0 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfffffdb0 0x30>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + status = "disabled"; + }; }; fb0: fb@0x00500000 { diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 96ccc7de4f0a..d8dd22651090 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -160,6 +160,10 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm_leds>; }; + + rtc@fffffdb0 { + status = "okay"; + }; }; fb0: fb@0x00500000 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 2bfac310dbec..68eb9aded164 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -87,6 +87,8 @@ ramc0: ramc@ffffe800 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe800 0x200>; + clocks = <&ddrck>; + clock-names = "ddrck"; }; pmc: pmc@fffffc00 { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 83d723711ae1..13bb24ea971a 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -136,6 +136,8 @@ }; usb0: ohci@00500000 { + num-ports = <1>; + atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index ab56c8b81dfa..f0b4352650ed 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -204,7 +204,7 @@ }; ssc0: ssc@fffc0000 { - compatible = "atmel,at91rm9200-ssc"; + compatible = "atmel,at91sam9rl-ssc"; reg = <0xfffc0000 0x4000>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; @@ -213,7 +213,7 @@ }; ssc1: ssc@fffc4000 { - compatible = "atmel,at91rm9200-ssc"; + compatible = "atmel,at91sam9rl-ssc"; reg = <0xfffc4000 0x4000>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index e1a5c70b885c..726274f7959b 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -95,6 +95,8 @@ ramc0: ramc@ffffe800 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe800 0x200>; + clocks = <&ddrck>; + clock-names = "ddrck"; }; pmc: pmc@fffffc00 { @@ -966,7 +968,7 @@ adc0: adc@f804c000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9260-adc"; + compatible = "atmel,at91sam9x5-adc"; reg = <0xf804c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&adc_clk>, diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 2a3b1c1313a0..58a0d60b95f1 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -23,7 +23,7 @@ &gpio { pinctrl-names = "default"; - pinctrl-0 = <&gpioout &alt0 &alt3>; + pinctrl-0 = <&gpioout &alt0 &alt2 &alt3>; gpioout: gpioout { brcm,pins = <6>; @@ -39,6 +39,12 @@ brcm,pins = <48 49 50 51 52 53>; brcm,function = <7>; /* alt3 */ }; + + /* I2S interface */ + alt2: alt2 { + brcm,pins = <28 29 30 31>; + brcm,function = <6>; /* alt2 */ + }; }; &i2c0 { diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index b8473c43e888..3342cb1407bc 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -99,6 +99,7 @@ dmas = <&dma 2>, <&dma 3>; dma-names = "tx", "rx"; + status = "disabled"; }; spi: spi@7e204000 { diff --git a/arch/arm/boot/dts/cros-adc-thermistors.dtsi b/arch/arm/boot/dts/cros-adc-thermistors.dtsi new file mode 100644 index 000000000000..acd4fe1833f2 --- /dev/null +++ b/arch/arm/boot/dts/cros-adc-thermistors.dtsi @@ -0,0 +1,44 @@ +/* + * Thermistor dts fragment for devices that use Thermistors as + * children of the IIO based ADC. + * + * Currently, used by Exynos5420 based Peach PIT and + * Exynos5800 based Peach PI. + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +&adc { + ncp15wb473@3 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 3>; + }; + ncp15wb473@4 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 4>; + }; + ncp15wb473@5 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 5>; + }; + ncp15wb473@6 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 6>; + }; +}; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 1e11e5a5f723..4f935ad9f27b 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -17,6 +17,18 @@ soc { pmx_core: pinmux@1c14120 { status = "okay"; + + mcasp0_pins: pinmux_mcasp0_pins { + pinctrl-single,bits = < + /* + * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR, + * AFSR, AMUTE + */ + 0x00 0x11111111 0xffffffff + /* AXR11, AXR12 */ + 0x04 0x00011000 0x000ff000 + >; + }; }; serial0: serial@1c42000 { status = "okay"; @@ -39,6 +51,20 @@ tps: tps@48 { reg = <0x48>; }; + tlv320aic3106: tlv320aic3106@18 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x18>; + status = "okay"; + + /* Regulators */ + IOVDD-supply = <&vdcdc2_reg>; + /* Derived from VBAT: Baseboard 3.3V / 1.8V */ + AVDD-supply = <&vbat>; + DRVDD-supply = <&vbat>; + DVDD-supply = <&vbat>; + }; + }; wdt: wdt@1c21000 { status = "okay"; @@ -117,6 +143,33 @@ regulator-max-microvolt = <5000000>; regulator-boot-on; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "DA850/OMAP-L138 EVM"; + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out"; + simple-audio-card,routing = + "LINE1L", "Line In", + "LINE1R", "Line In", + "Line Out", "LLOUT", + "Line Out", "RLOUT"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&link0_codec>; + simple-audio-card,frame-master = <&link0_codec>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp0>; + system-clock-frequency = <24576000>; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + system-clock-frequency = <24576000>; + }; + }; }; /include/ "tps6507x.dtsi" @@ -170,3 +223,22 @@ }; }; }; + +&mcasp0 { + #sound-dai-cells = <0>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 0 0 + 0 0 0 0 + 0 0 0 1 + 2 0 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index b695548dbb4e..0bd98cd00816 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -150,6 +150,12 @@ }; }; + edma0: edma@01c00000 { + compatible = "ti,edma3"; + reg = <0x0 0x10000>; + interrupts = <11 13 12>; + #dma-cells = <1>; + }; serial0: serial@1c42000 { compatible = "ns16550a"; reg = <0x42000 0x100>; @@ -270,6 +276,19 @@ ti,davinci-gpio-unbanked = <0>; status = "disabled"; }; + + mcasp0: mcasp@01d00000 { + compatible = "ti,da830-mcasp-audio"; + reg = <0x100000 0x2000>, + <0x102000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <54>; + interrupt-names = "common"; + status = "disabled"; + dmas = <&edma0 1>, + <&edma0 0>; + dma-names = "tx", "rx"; + }; }; nand_cs3@62000000 { compatible = "ti,davinci-nand"; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index b40cdadb1f87..c6ce6258434f 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -323,6 +323,8 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; + interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <&dra7_pmx_core 0x3e0>; }; &uart2 { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index e09b1afdaef2..9cc98436a982 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -218,10 +218,12 @@ }; dra7_pmx_core: pinmux@4a003400 { - compatible = "pinctrl-single"; + compatible = "ti,dra7-padconf", "pinctrl-single"; reg = <0x4a003400 0x0464>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x3fffffff>; }; @@ -329,7 +331,7 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; status = "disabled"; @@ -338,7 +340,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; status = "disabled"; @@ -347,7 +349,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; status = "disabled"; @@ -356,7 +358,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; @@ -365,7 +367,7 @@ uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; @@ -374,7 +376,7 @@ uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; @@ -383,7 +385,7 @@ uart7: serial@48420000 { compatible = "ti,omap4-uart"; reg = <0x48420000 0x100>; - interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart7"; clock-frequency = <48000000>; status = "disabled"; @@ -392,7 +394,7 @@ uart8: serial@48422000 { compatible = "ti,omap4-uart"; reg = <0x48422000 0x100>; - interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart8"; clock-frequency = <48000000>; status = "disabled"; @@ -401,7 +403,7 @@ uart9: serial@48424000 { compatible = "ti,omap4-uart"; reg = <0x48424000 0x100>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart9"; clock-frequency = <48000000>; status = "disabled"; @@ -410,7 +412,7 @@ uart10: serial@4ae2b000 { compatible = "ti,omap4-uart"; reg = <0x4ae2b000 0x100>; - interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart10"; clock-frequency = <48000000>; status = "disabled"; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 514702348818..41074288adfa 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -19,6 +19,126 @@ }; }; +&dra7_pmx_core { + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + >; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + tps65917: tps65917@58 { + compatible = "ti,tps65917"; + reg = <0x58>; + + interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + + ti,system-power-controller; + + tps65917_pmic { + compatible = "ti,tps65917-pmic"; + + regulators { + smps1_reg: smps1 { + /* VDD_MPU */ + regulator-name = "smps1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps2_reg: smps2 { + /* VDD_CORE */ + regulator-name = "smps2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1030000>; + regulator-boot-on; + regulator-always-on; + }; + + smps3_reg: smps3 { + /* VDD_GPU IVA DSPEVE */ + regulator-name = "smps3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + + smps4_reg: smps4 { + /* VDDS1V8 */ + regulator-name = "smps4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps5_reg: smps5 { + /* VDD_DDR */ + regulator-name = "smps5"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + /* LDO1_OUT --> SDIO */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo2_reg: ldo2 { + /* LDO2_OUT --> TP1017 (UNUSED) */ + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHY */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PLL */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldo4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; + }; +}; + &uart1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index f1ec22f6ebf4..e5a3d23a3df1 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -22,4 +22,9 @@ reg = <0>; }; }; + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>; + }; }; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index a4e8bb9f95c0..3be544c4891f 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -38,4 +38,10 @@ reg = <1>; }; }; + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI DIRECT_IRQ(132) IRQ_TYPE_LEVEL_HIGH>; + }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index adadaf97ac01..c697ff01ae8d 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -54,17 +54,13 @@ status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; watchdog@10060000 { diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index e925c9fbfb07..de15114fd07c 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -137,17 +137,13 @@ status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; codec@13400000 { diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 11967f4561e0..5e066cd87f66 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -520,7 +520,6 @@ mmc@12550000 { num-slots = <1>; - supports-highspeed; broken-cd; non-removable; card-detect-delay = <200>; @@ -532,11 +531,8 @@ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; status = "okay"; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; serial@13800000 { diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index d0de1f50d15b..3acd97eb6630 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -401,7 +401,6 @@ mmc_0: mmc@12200000 { status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; @@ -410,17 +409,13 @@ vmmc-supply = <&mmc_reg>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; mmc_2: mmc@12220000 { status = "okay"; num-slots = <1>; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -428,12 +423,9 @@ vmmc-supply = <&mmc_reg>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; }; i2s0: i2s@03830000 { @@ -570,8 +562,4 @@ connect-gpios = <&gpd1 7 1>; }; }; - - usb@12110000 { - usb-phy = <&usb2_phy>; - }; }; diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi deleted file mode 100644 index e603e9c70142..000000000000 --- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi +++ /dev/null @@ -1,164 +0,0 @@ -/* - * Common device tree include for all Exynos 5250 boards based off of Daisy. - * - * Copyright (c) 2012 Google, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/ { - aliases { - }; - - memory { - reg = <0x40000000 0x80000000>; - }; - - chosen { - }; - - pinctrl@11400000 { - /* - * Disabled pullups since external part has its own pullups and - * double-pulling gets us out of spec in some cases. - */ - i2c2_bus: i2c2-bus { - samsung,pin-pud = <0>; - }; - }; - - i2c@12C60000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <378000>; - }; - - i2c@12C70000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <378000>; - }; - - i2c@12C80000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; - }; - - i2c@12C90000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - }; - - i2c@12CA0000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - }; - - i2c@12CB0000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - }; - - i2c@12CD0000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - }; - - i2c@12CE0000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <378000>; - - hdmiphy: hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; - }; - - mmc@12200000 { - num-slots = <1>; - supports-highspeed; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; - }; - - mmc@12220000 { - num-slots = <1>; - supports-highspeed; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - wp-gpios = <&gpc2 1 0>; - }; - }; - - mmc@12230000 { - num-slots = <1>; - supports-highspeed; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - /* See board-specific dts files for pin setup */ - - slot@0 { - reg = <0>; - bus-width = <4>; - }; - }; - - spi_1: spi@12d30000 { - status = "okay"; - samsung,spi-src-clk = <0>; - num-cs = <1>; - }; - - hdmi { - hpd-gpio = <&gpx3 7 0>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd_irq>; - phy = <&hdmiphy>; - ddc = <&i2c_2>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - power { - label = "Power"; - gpios = <&gpx1 3 1>; - linux,code = <116>; /* KEY_POWER */ - gpio-key,wakeup; - }; - }; -}; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index b4b35adae565..6a0f4c0ff763 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -284,7 +284,6 @@ mmc@12200000 { status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; @@ -292,29 +291,22 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; mmc@12220000 { status = "okay"; num-slots = <1>; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; }; spi_1: spi@12d30000 { diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index f2b8c4116541..e51fcef884a4 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -9,8 +9,8 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "exynos5250.dtsi" -#include "exynos5250-cros-common.dtsi" / { model = "Google Snow"; @@ -20,6 +20,13 @@ i2c104 = &i2c_104; }; + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + }; + rtc@101E0000 { status = "okay"; }; @@ -93,6 +100,13 @@ gpio-keys { compatible = "gpio-keys"; + power { + label = "Power"; + gpios = <&gpx1 3 1>; + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + lid-switch { label = "Lid"; gpios = <&gpx3 5 1>; @@ -181,7 +195,7 @@ dcdc3 { ti,enable-ext-control; }; - fet1 { + fet1: fet1 { regulator-name = "vcd_led"; ti,overcurrent-wait = <3>; }; @@ -204,7 +218,7 @@ regulator-always-on; ti,overcurrent-wait = <3>; }; - fet6 { + fet6: fet6 { regulator-name = "lcd_vdd"; ti,overcurrent-wait = <3>; }; @@ -226,26 +240,6 @@ }; }; - mmc@12200000 { - status = "okay"; - }; - - mmc@12220000 { - status = "okay"; - }; - - /* - * On Snow we've got SIP WiFi and so can keep drive strengths low to - * reduce EMI. - */ - mmc@12230000 { - status = "okay"; - slot@0 { - pinctrl-names = "default"; - pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; - }; - }; - i2c@12CD0000 { max98095: codec@11 { compatible = "maxim,max98095"; @@ -253,6 +247,15 @@ pinctrl-0 = <&max98095_en>; pinctrl-names = "default"; }; + + ptn3460: lvds-bridge@20 { + compatible = "nxp,ptn3460"; + reg = <0x20>; + powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; + edid-emulation = <5>; + panel = <&panel>; + }; }; i2s0: i2s@03830000 { @@ -294,17 +297,24 @@ }; hdmi { + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + phy = <&hdmiphy>; + ddc = <&i2c_2>; hdmi-en-supply = <&tps65090_fet7>; vdd-supply = <&ldo8_reg>; vdd_osc-supply = <&ldo10_reg>; vdd_pll-supply = <&ldo8_reg>; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 1000000 0>; brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; default-brightness-level = <7>; + enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; + power-supply = <&fet1>; pinctrl-0 = <&pwm0_out>; pinctrl-names = "default"; }; @@ -314,6 +324,12 @@ samsung,invert-vclk; }; + panel: panel { + compatible = "auo,b116xw03"; + power-supply = <&fet6>; + backlight = <&backlight>; + }; + dp-controller@145B0000 { status = "okay"; pinctrl-names = "default"; @@ -325,26 +341,15 @@ samsung,link-rate = <0x0a>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx0 7 0>; - - display-timings { - native-mode = <&timing1>; - - timing1: timing@1 { - clock-frequency = <70589280>; - hactive = <1366>; - vactive = <768>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <32>; - vback-porch = <10>; - vfront-porch = <12>; - vsync-len = <6>; - }; - }; + bridge = <&ptn3460>; }; }; &i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + max77686@09 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; @@ -491,6 +496,10 @@ }; &i2c_1 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + trackpad { reg = <0x67>; compatible = "cypress,cyapa"; @@ -500,6 +509,106 @@ }; }; +/* + * Disabled pullups since external part has its own pullups and + * double-pulling gets us out of spec in some cases. + */ +&i2c2_bus { + samsung,pin-pud = <0>; +}; + +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; +}; + +&i2c_3 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_4 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_5 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_7 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_8 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + hdmiphy: hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + bus-width = <4>; + wp-gpios = <&gpc2 1 0>; + cap-sd-highspeed; +}; + +/* + * On Snow we've got SIP WiFi and so can keep drive strengths low to + * reduce EMI. + */ +&mmc_3 { + status = "okay"; + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; + bus-width = <4>; + cap-sd-highspeed; +}; + &pinctrl_0 { max77686_irq: max77686-irq { samsung,pins = "gpx3-2"; @@ -509,4 +618,10 @@ }; }; +&spi_1 { + status = "okay"; + samsung,spi-src-clk = <0>; + num-cs = <1>; +}; + #include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 492e1eff37bd..f21b9aa00fbb 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -603,21 +603,6 @@ }; }; - usb2_phy: usbphy@12130000 { - compatible = "samsung,exynos5250-usb2phy"; - reg = <0x12130000 0x100>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB2>; - clock-names = "ext_xtal", "usbhost"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - usbphy-sys { - reg = <0x10040704 0x8>, - <0x10050230 0x4>; - }; - }; - usb2_phy_gen: phy@12130000 { compatible = "samsung,exynos5250-usb2-phy"; reg = <0x12130000 0x100>; diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts index 8c84ab27c19b..a803b605051b 100644 --- a/arch/arm/boot/dts/exynos5260-xyref5260.dts +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts @@ -69,7 +69,7 @@ num-slots = <1>; broken-cd; bypass-smu; - supports-highspeed; + cap-mmc-highspeed; supports-hs200-mode; /* 200 Mhz */ card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; @@ -77,27 +77,19 @@ samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; }; &mmc_2 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-sd-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index 7275bbd6fc4b..be3e02530b42 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -40,33 +40,25 @@ &mmc_0 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-mmc-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; }; &mmc_2 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-sd-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; - - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; &uart0 { diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 434fd9d3e09d..70a559cf1a3d 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -50,7 +50,6 @@ mmc@12200000 { status = "okay"; broken-cd; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; @@ -58,16 +57,12 @@ pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; vmmc-supply = <&ldo10_reg>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; mmc@12220000 { status = "okay"; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -75,11 +70,8 @@ pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; vmmc-supply = <&ldo10_reg>; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-sd-highspeed; }; hsi2c_4: i2c@12CA0000 { diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 228a6b1e0aa1..9a233828539c 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -11,6 +11,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "exynos5420.dtsi" / { @@ -30,11 +31,12 @@ i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel"; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 1000000 0>; brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; default-brightness-level = <7>; + power-supply = <&tps65090_fet1>; pinctrl-0 = <&pwm0_out>; pinctrl-names = "default"; }; @@ -100,6 +102,17 @@ regulator-boot-on; regulator-always-on; }; + + panel: panel { + compatible = "auo,b116xw03"; + power-supply = <&tps65090_fet6>; + backlight = <&backlight>; + }; +}; + +&adc { + status = "okay"; + vdd-supply = <&ldo9_reg>; }; &dp { @@ -113,22 +126,7 @@ samsung,link-rate = <0x06>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx2 6 0>; - - display-timings { - native-mode = <&timing1>; - - timing1: timing@1 { - clock-frequency = <70589280>; - hactive = <1366>; - vactive = <768>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <32>; - vback-porch = <10>; - vfront-porch = <12>; - vsync-len = <6>; - }; - }; + bridge = <&ps8625>; }; &fimd { @@ -142,10 +140,348 @@ pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; ddc = <&i2c_2>; + + hdmi-en-supply = <&tps65090_fet7>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; +}; + +&hsi2c_4 { + status = "okay"; + clock-frequency = <400000>; + + max77802-pmic@9 { + compatible = "maxim,max77802"; + interrupt-parent = <&gpx3>; + interrupts = <1 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77802_irq>, <&pmic_selb>, + <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>; + wakeup-source; + reg = <0x9>; + #clock-cells = <1>; + + inb1-supply = <&tps65090_dcdc2>; + inb2-supply = <&tps65090_dcdc1>; + inb3-supply = <&tps65090_dcdc2>; + inb4-supply = <&tps65090_dcdc2>; + inb5-supply = <&tps65090_dcdc1>; + inb6-supply = <&tps65090_dcdc2>; + inb7-supply = <&tps65090_dcdc1>; + inb8-supply = <&tps65090_dcdc1>; + inb9-supply = <&tps65090_dcdc1>; + inb10-supply = <&tps65090_dcdc1>; + + inl1-supply = <&buck5_reg>; + inl2-supply = <&buck7_reg>; + inl3-supply = <&buck9_reg>; + inl4-supply = <&buck9_reg>; + inl5-supply = <&buck9_reg>; + inl6-supply = <&tps65090_dcdc2>; + inl7-supply = <&buck9_reg>; + inl9-supply = <&tps65090_dcdc2>; + inl10-supply = <&buck7_reg>; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck7_reg: BUCK7 { + regulator-name = "vdd_1v35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "vdd_emmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_2v"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "vdd_1v2_2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo3_reg: LDO3 { + regulator-name = "vdd_1v8_3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vqmmc_sdcard: ldo4_reg: LDO4 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd_1v8_5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_1v8_6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_1v8_7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "vdd_ldo13"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "vdd_ldo14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "vdd_g3ds"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + ldo18_reg: LDO18 { + regulator-name = "ldo_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "ldo_19"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo20_reg: LDO20 { + regulator-name = "ldo_20"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "ldo_21"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "ldo_23"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + ldo24_reg: LDO24 { + regulator-name = "ldo_24"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "ldo_25"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo26_reg: LDO26 { + regulator-name = "ldo_26"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "ldo_27"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo28_reg: LDO28 { + regulator-name = "ldo_28"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo29_reg: LDO29 { + regulator-name = "ldo_29"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo30_reg: LDO30 { + regulator-name = "vdd_mifs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo32_reg: LDO32 { + regulator-name = "ldo_32"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo33_reg: LDO33 { + regulator-name = "ldo_33"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo34_reg: LDO34 { + regulator-name = "ldo_34"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo35_reg: LDO35 { + regulator-name = "ldo_35"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; }; &hsi2c_7 { status = "okay"; + clock-frequency = <400000>; max98090: codec@10 { compatible = "maxim,max98090"; @@ -155,6 +491,44 @@ pinctrl-names = "default"; pinctrl-0 = <&max98090_irq>; }; + + light-sensor@44 { + compatible = "isil,isl29018"; + reg = <0x44>; + vcc-supply = <&tps65090_fet5>; + }; + + ps8625: lvds-bridge@48 { + compatible = "parade,ps8625"; + reg = <0x48>; + sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>; + lane-count = <2>; + panel = <&panel>; + use-external-pwm; + }; +}; + +&hsi2c_8 { + status = "okay"; + clock-frequency = <333000>; + + /* Atmel mXT336S */ + trackpad@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpx1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_irq>; + linux,gpio-keymap = <KEY_RESERVED + KEY_RESERVED + KEY_RESERVED /* GPIO0 */ + KEY_RESERVED /* GPIO1 */ + KEY_RESERVED /* GPIO2 */ + BTN_LEFT>; /* GPIO3 */ + }; }; &hsi2c_9 { @@ -187,7 +561,7 @@ num-slots = <1>; broken-cd; caps2-mmc-hs200-1_8v; - supports-highspeed; + cap-mmc-highspeed; non-removable; card-detect-delay = <200>; clock-frequency = <400000000>; @@ -196,17 +570,13 @@ samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; }; &mmc_2 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-sd-highspeed; card-detect-delay = <200>; clock-frequency = <400000000>; samsung,dw-mshc-ciu-div = <3>; @@ -214,11 +584,7 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; }; @@ -249,6 +615,13 @@ samsung,pin-drv = <0>; }; + trackpad_irq: trackpad-irq { + samsung,pins = "gpx1-1"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + power_key_irq: power-key-irq { samsung,pins = "gpx1-2"; samsung,pin-function = <0>; @@ -277,12 +650,42 @@ samsung,pin-drv = <0>; }; + max77802_irq: max77802-irq { + samsung,pins = "gpx3-1"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + hdmi_hpd_irq: hdmi-hpd-irq { samsung,pins = "gpx3-7"; samsung,pin-function = <0>; samsung,pin-pud = <1>; samsung,pin-drv = <0>; }; + + pmic_dvs_1: pmic-dvs-1 { + samsung,pins = "gpy7-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_2 { + pmic_dvs_2: pmic-dvs-2 { + samsung,pins = "gpj4-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pmic_dvs_3: pmic-dvs-3 { + samsung,pins = "gpj4-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; &pinctrl_3 { @@ -312,6 +715,14 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + pmic_selb: pmic-selb { + samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5", + "gph0-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; &rtc { @@ -365,12 +776,12 @@ vsys2-supply = <&vbat>; vsys3-supply = <&vbat>; infet1-supply = <&vbat>; - infet2-supply = <&vbat>; - infet3-supply = <&vbat>; - infet4-supply = <&vbat>; - infet5-supply = <&vbat>; - infet6-supply = <&vbat>; - infet7-supply = <&vbat>; + infet2-supply = <&tps65090_dcdc1>; + infet3-supply = <&tps65090_dcdc2>; + infet4-supply = <&tps65090_dcdc2>; + infet5-supply = <&tps65090_dcdc2>; + infet6-supply = <&tps65090_dcdc2>; + infet7-supply = <&tps65090_dcdc1>; vsys-l1-supply = <&vbat>; vsys-l2-supply = <&vbat>; @@ -445,3 +856,4 @@ }; #include "cros-ec-keyboard.dtsi" +#include "cros-adc-thermistors.dtsi" diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 6052aa9c5659..8be3d7b489ff 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -76,34 +76,26 @@ mmc@12200000 { status = "okay"; broken-cd; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; mmc@12220000 { status = "okay"; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-sd-highspeed; }; dp-controller@145B0000 { diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index f3ee48bbe05f..1d31c8132558 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -11,6 +11,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "exynos5800.dtsi" / { @@ -28,11 +29,13 @@ i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel"; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 1000000 0>; brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; default-brightness-level = <7>; + enable-gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; + power-supply = <&tps65090_fet1>; pinctrl-0 = <&pwm0_out>; pinctrl-names = "default"; }; @@ -98,6 +101,17 @@ regulator-boot-on; regulator-always-on; }; + + panel: panel { + compatible = "auo,b133htn01"; + power-supply = <&tps65090_fet6>; + backlight = <&backlight>; + }; +}; + +&adc { + status = "okay"; + vdd-supply = <&ldo9_reg>; }; &dp { @@ -111,22 +125,7 @@ samsung,link-rate = <0x0a>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx2 6 0>; - - display-timings { - native-mode = <&timing1>; - - timing1: timing@1 { - clock-frequency = <150660000>; - hactive = <1920>; - vactive = <1080>; - hfront-porch = <60>; - hback-porch = <172>; - hsync-len = <80>; - vback-porch = <25>; - vfront-porch = <10>; - vsync-len = <10>; - }; - }; + panel = <&panel>; }; &fimd { @@ -140,10 +139,348 @@ pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; ddc = <&i2c_2>; + + hdmi-en-supply = <&tps65090_fet7>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; +}; + +&hsi2c_4 { + status = "okay"; + clock-frequency = <400000>; + + max77802-pmic@9 { + compatible = "maxim,max77802"; + interrupt-parent = <&gpx3>; + interrupts = <1 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77802_irq>, <&pmic_selb>, + <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>; + wakeup-source; + reg = <0x9>; + #clock-cells = <1>; + + inb1-supply = <&tps65090_dcdc2>; + inb2-supply = <&tps65090_dcdc1>; + inb3-supply = <&tps65090_dcdc2>; + inb4-supply = <&tps65090_dcdc2>; + inb5-supply = <&tps65090_dcdc1>; + inb6-supply = <&tps65090_dcdc2>; + inb7-supply = <&tps65090_dcdc1>; + inb8-supply = <&tps65090_dcdc1>; + inb9-supply = <&tps65090_dcdc1>; + inb10-supply = <&tps65090_dcdc1>; + + inl1-supply = <&buck5_reg>; + inl2-supply = <&buck7_reg>; + inl3-supply = <&buck9_reg>; + inl4-supply = <&buck9_reg>; + inl5-supply = <&buck9_reg>; + inl6-supply = <&tps65090_dcdc2>; + inl7-supply = <&buck9_reg>; + inl9-supply = <&tps65090_dcdc2>; + inl10-supply = <&buck7_reg>; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck7_reg: BUCK7 { + regulator-name = "vdd_1v35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "vdd_emmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_2v"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "vdd_1v2_2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo3_reg: LDO3 { + regulator-name = "vdd_1v8_3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vqmmc_sdcard: ldo4_reg: LDO4 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd_1v8_5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_1v8_6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_1v8_7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "vdd_ldo13"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "vdd_ldo14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "vdd_g3ds"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + ldo18_reg: LDO18 { + regulator-name = "ldo_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "ldo_19"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo20_reg: LDO20 { + regulator-name = "ldo_20"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "ldo_21"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "ldo_23"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + ldo24_reg: LDO24 { + regulator-name = "ldo_24"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "ldo_25"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo26_reg: LDO26 { + regulator-name = "ldo_26"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "ldo_27"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo28_reg: LDO28 { + regulator-name = "ldo_28"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo29_reg: LDO29 { + regulator-name = "ldo_29"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo30_reg: LDO30 { + regulator-name = "vdd_mifs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo32_reg: LDO32 { + regulator-name = "ldo_32"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo33_reg: LDO33 { + regulator-name = "ldo_33"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo34_reg: LDO34 { + regulator-name = "ldo_34"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo35_reg: LDO35 { + regulator-name = "ldo_35"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; }; &hsi2c_7 { status = "okay"; + clock-frequency = <400000>; max98091: codec@10 { compatible = "maxim,max98091"; @@ -153,6 +490,33 @@ pinctrl-names = "default"; pinctrl-0 = <&max98091_irq>; }; + + light-sensor@44 { + compatible = "isil,isl29018"; + reg = <0x44>; + vcc-supply = <&tps65090_fet5>; + }; +}; + +&hsi2c_8 { + status = "okay"; + clock-frequency = <333000>; + /* Atmel mXT540S */ + trackpad@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpx1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_irq>; + linux,gpio-keymap = <KEY_RESERVED + KEY_RESERVED + KEY_RESERVED /* GPIO 0 */ + KEY_RESERVED /* GPIO 1 */ + BTN_LEFT /* GPIO 2 */ + KEY_RESERVED>; /* GPIO 3 */ + }; }; &hsi2c_9 { @@ -185,7 +549,7 @@ num-slots = <1>; broken-cd; caps2-mmc-hs200-1_8v; - supports-highspeed; + cap-mmc-highspeed; non-removable; card-detect-delay = <200>; clock-frequency = <400000000>; @@ -194,17 +558,13 @@ samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; }; &mmc_2 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-sd-highspeed; card-detect-delay = <200>; clock-frequency = <400000000>; samsung,dw-mshc-ciu-div = <3>; @@ -212,11 +572,7 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; }; @@ -247,6 +603,13 @@ samsung,pin-drv = <0>; }; + trackpad_irq: trackpad-irq { + samsung,pins = "gpx1-1"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + power_key_irq: power-key-irq { samsung,pins = "gpx1-2"; samsung,pin-function = <0>; @@ -275,12 +638,42 @@ samsung,pin-drv = <0>; }; + max77802_irq: max77802-irq { + samsung,pins = "gpx3-1"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + hdmi_hpd_irq: hdmi-hpd-irq { samsung,pins = "gpx3-7"; samsung,pin-function = <0>; samsung,pin-pud = <1>; samsung,pin-drv = <0>; }; + + pmic_dvs_1: pmic-dvs-1 { + samsung,pins = "gpy7-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_2 { + pmic_dvs_2: pmic-dvs-2 { + samsung,pins = "gpj4-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pmic_dvs_3: pmic-dvs-3 { + samsung,pins = "gpj4-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; &pinctrl_3 { @@ -310,6 +703,14 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + pmic_selb: pmic-selb { + samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5", + "gph0-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; &rtc { @@ -363,12 +764,12 @@ vsys2-supply = <&vbat>; vsys3-supply = <&vbat>; infet1-supply = <&vbat>; - infet2-supply = <&vbat>; - infet3-supply = <&vbat>; - infet4-supply = <&vbat>; - infet5-supply = <&vbat>; - infet6-supply = <&vbat>; - infet7-supply = <&vbat>; + infet2-supply = <&tps65090_dcdc1>; + infet3-supply = <&tps65090_dcdc2>; + infet4-supply = <&tps65090_dcdc2>; + infet5-supply = <&tps65090_dcdc2>; + infet6-supply = <&tps65090_dcdc2>; + infet7-supply = <&tps65090_dcdc1>; vsys-l1-supply = <&vbat>; vsys-l2-supply = <&vbat>; @@ -443,3 +844,4 @@ }; #include "cros-ec-keyboard.dtsi" +#include "cros-adc-thermistors.dtsi" diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts new file mode 100644 index 000000000000..af4eee5794aa --- /dev/null +++ b/arch/arm/boot/dts/imx1-ads.dts @@ -0,0 +1,152 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx1.dtsi" + +/ { + model = "Freescale MX1 ADS"; + compatible = "fsl,imx1ads", "fsl,imx1"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x08000000 0x04000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + clk32 { + compatible = "fsl,imx-clk32", "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + }; +}; + +&cspi1 { + pinctrl-0 = <&pinctrl_cspi1>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c>; + status = "okay"; + + extgpio0: pcf8575@22 { + compatible = "nxp,pcf8575"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + extgpio1: pcf8575@24 { + compatible = "nxp,pcf8575"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim>; + status = "okay"; + + nor: nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0x00000000 0x02000000>; + bank-width = <4>; + fsl,weim-cs-timing = <0x00003e00 0x00000801>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&iomuxc { + imx1-ads { + pinctrl_cspi1: cspi1grp { + fsl,pins = < + MX1_PAD_SPI1_MISO__SPI1_MISO 0x0 + MX1_PAD_SPI1_MOSI__SPI1_MOSI 0x0 + MX1_PAD_SPI1_RDY__SPI1_RDY 0x0 + MX1_PAD_SPI1_SCLK__SPI1_SCLK 0x0 + MX1_PAD_SPI1_SS__GPIO3_15 0x0 + >; + }; + + pinctrl_i2c: i2cgrp { + fsl,pins = < + MX1_PAD_I2C_SCL__I2C_SCL 0x0 + MX1_PAD_I2C_SDA__I2C_SDA 0x0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX1_PAD_UART1_TXD__UART1_TXD 0x0 + MX1_PAD_UART1_RXD__UART1_RXD 0x0 + MX1_PAD_UART1_CTS__UART1_CTS 0x0 + MX1_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX1_PAD_UART2_TXD__UART2_TXD 0x0 + MX1_PAD_UART2_RXD__UART2_RXD 0x0 + MX1_PAD_UART2_CTS__UART2_CTS 0x0 + MX1_PAD_UART2_RTS__UART2_RTS 0x0 + >; + }; + + pinctrl_weim: weimgrp { + fsl,pins = < + MX1_PAD_A0__A0 0x0 + MX1_PAD_A16__A16 0x0 + MX1_PAD_A17__A17 0x0 + MX1_PAD_A18__A18 0x0 + MX1_PAD_A19__A19 0x0 + MX1_PAD_A20__A20 0x0 + MX1_PAD_A21__A21 0x0 + MX1_PAD_A22__A22 0x0 + MX1_PAD_A23__A23 0x0 + MX1_PAD_A24__A24 0x0 + MX1_PAD_BCLK__BCLK 0x0 + MX1_PAD_CS4__CS4 0x0 + MX1_PAD_DTACK__DTACK 0x0 + MX1_PAD_ECB__ECB 0x0 + MX1_PAD_LBA__LBA 0x0 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/imx1-apf9328.dts new file mode 100644 index 000000000000..07d92fb40e6f --- /dev/null +++ b/arch/arm/boot/dts/imx1-apf9328.dts @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx1.dtsi" + +/ { + model = "Armadeus APF9328"; + compatible = "armadeus,imx1-apf9328", "fsl,imx1"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x08000000 0x00800000>; + }; +}; + +&i2c { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim>; + status = "okay"; + + nor: nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0x00000000 0x02000000>; + bank-width = <2>; + fsl,weim-cs-timing = <0x00330e04 0x00000d01>; + #address-cells = <1>; + #size-cells = <1>; + }; + + eth: eth@4,c00000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth>; + compatible = "davicom,dm9000"; + reg = < + 4 0x00c00000 0x2 + 4 0x00c00002 0x2 + >; + interrupt-parent = <&gpio2>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + fsl,weim-cs-timing = <0x0000c700 0x19190d01>; + }; +}; + +&iomuxc { + imx1-apf9328 { + pinctrl_eth: ethgrp { + fsl,pins = < + MX1_PAD_SIM_SVEN__GPIO2_14 0x0 + >; + }; + + pinctrl_i2c: i2cgrp { + fsl,pins = < + MX1_PAD_I2C_SCL__I2C_SCL 0x0 + MX1_PAD_I2C_SDA__I2C_SDA 0x0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX1_PAD_UART1_TXD__UART1_TXD 0x0 + MX1_PAD_UART1_RXD__UART1_RXD 0x0 + MX1_PAD_UART1_CTS__UART1_CTS 0x0 + MX1_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX1_PAD_UART2_TXD__UART2_TXD 0x0 + MX1_PAD_UART2_RXD__UART2_RXD 0x0 + MX1_PAD_UART2_CTS__UART2_CTS 0x0 + MX1_PAD_UART2_RTS__UART2_RTS 0x0 + >; + }; + + pinctrl_weim: weimgrp { + fsl,pins = < + MX1_PAD_A0__A0 0x0 + MX1_PAD_A16__A16 0x0 + MX1_PAD_A17__A17 0x0 + MX1_PAD_A18__A18 0x0 + MX1_PAD_A19__A19 0x0 + MX1_PAD_A20__A20 0x0 + MX1_PAD_A21__A21 0x0 + MX1_PAD_A22__A22 0x0 + MX1_PAD_A23__A23 0x0 + MX1_PAD_A24__A24 0x0 + MX1_PAD_BCLK__BCLK 0x0 + MX1_PAD_CS4__CS4 0x0 + MX1_PAD_DTACK__DTACK 0x0 + MX1_PAD_ECB__ECB 0x0 + MX1_PAD_LBA__LBA 0x0 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx1-pinfunc.h b/arch/arm/boot/dts/imx1-pinfunc.h new file mode 100644 index 000000000000..22bec8b87680 --- /dev/null +++ b/arch/arm/boot/dts/imx1-pinfunc.h @@ -0,0 +1,302 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __DTS_IMX1_PINFUNC_H +#define __DTS_IMX1_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <pin mux_id> + * mux_id consists of + * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10) + * + * function: 0 - Primary function + * 1 - Alternate function + * 2 - GPIO + * direction: 0 - Input + * 1 - Output + * gpio_oconf: 0 - A_IN + * 1 - B_IN + * 2 - A_OUT + * 3 - Data Register + * gpio_iconfa/b: 0 - GPIO_IN + * 1 - Interrupt Status Register + * 2 - 0 + * 3 - 1 + * + * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32 configurable + * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin + * number on the specific port (between 0 and 31). + */ + +#define MX1_PAD_A24__A24 0x00 0x004 +#define MX1_PAD_A24__GPIO1_0 0x00 0x032 +#define MX1_PAD_A24__SPI2_CLK 0x00 0x006 +#define MX1_PAD_TIN__TIN 0x01 0x000 +#define MX1_PAD_TIN__GPIO1_1 0x01 0x032 +#define MX1_PAD_TIN__SPI2_RXD 0x01 0x022 +#define MX1_PAD_PWMO__PWMO 0x02 0x004 +#define MX1_PAD_PWMO__GPIO1_2 0x02 0x032 +#define MX1_PAD_CSI_MCLK__CSI_MCLK 0x03 0x004 +#define MX1_PAD_CSI_MCLK__GPIO1_3 0x03 0x032 +#define MX1_PAD_CSI_D0__CSI_D0 0x04 0x000 +#define MX1_PAD_CSI_D0__GPIO1_4 0x04 0x032 +#define MX1_PAD_CSI_D1__CSI_D1 0x05 0x000 +#define MX1_PAD_CSI_D1__GPIO1_5 0x05 0x032 +#define MX1_PAD_CSI_D2__CSI_D2 0x06 0x000 +#define MX1_PAD_CSI_D2__GPIO1_6 0x06 0x032 +#define MX1_PAD_CSI_D3__CSI_D3 0x07 0x000 +#define MX1_PAD_CSI_D3__GPIO1_7 0x07 0x032 +#define MX1_PAD_CSI_D4__CSI_D4 0x08 0x000 +#define MX1_PAD_CSI_D4__GPIO1_8 0x08 0x032 +#define MX1_PAD_CSI_D5__CSI_D5 0x09 0x000 +#define MX1_PAD_CSI_D5__GPIO1_9 0x09 0x032 +#define MX1_PAD_CSI_D6__CSI_D6 0x0a 0x000 +#define MX1_PAD_CSI_D6__GPIO1_10 0x0a 0x032 +#define MX1_PAD_CSI_D7__CSI_D7 0x0b 0x000 +#define MX1_PAD_CSI_D7__GPIO1_11 0x0b 0x032 +#define MX1_PAD_CSI_VSYNC__CSI_VSYNC 0x0c 0x000 +#define MX1_PAD_CSI_VSYNC__GPIO1_12 0x0c 0x032 +#define MX1_PAD_CSI_HSYNC__CSI_HSYNC 0x0d 0x000 +#define MX1_PAD_CSI_HSYNC__GPIO1_13 0x0d 0x032 +#define MX1_PAD_CSI_PIXCLK__CSI_PIXCLK 0x0e 0x000 +#define MX1_PAD_CSI_PIXCLK__GPIO1_14 0x0e 0x032 +#define MX1_PAD_I2C_SDA__I2C_SDA 0x0f 0x000 +#define MX1_PAD_I2C_SDA__GPIO1_15 0x0f 0x032 +#define MX1_PAD_I2C_SCL__I2C_SCL 0x10 0x004 +#define MX1_PAD_I2C_SCL__GPIO1_16 0x10 0x032 +#define MX1_PAD_DTACK__DTACK 0x11 0x000 +#define MX1_PAD_DTACK__GPIO1_17 0x11 0x032 +#define MX1_PAD_DTACK__SPI2_SS 0x11 0x002 +#define MX1_PAD_DTACK__A25 0x11 0x016 +#define MX1_PAD_BCLK__BCLK 0x12 0x004 +#define MX1_PAD_BCLK__GPIO1_18 0x12 0x032 +#define MX1_PAD_LBA__LBA 0x13 0x004 +#define MX1_PAD_LBA__GPIO1_19 0x13 0x032 +#define MX1_PAD_ECB__ECB 0x14 0x000 +#define MX1_PAD_ECB__GPIO1_20 0x14 0x032 +#define MX1_PAD_A0__A0 0x15 0x004 +#define MX1_PAD_A0__GPIO1_21 0x15 0x032 +#define MX1_PAD_CS4__CS4 0x16 0x004 +#define MX1_PAD_CS4__GPIO1_22 0x16 0x032 +#define MX1_PAD_CS5__CS5 0x17 0x004 +#define MX1_PAD_CS5__GPIO1_23 0x17 0x032 +#define MX1_PAD_A16__A16 0x18 0x004 +#define MX1_PAD_A16__GPIO1_24 0x18 0x032 +#define MX1_PAD_A17__A17 0x19 0x004 +#define MX1_PAD_A17__GPIO1_25 0x19 0x032 +#define MX1_PAD_A18__A18 0x1a 0x004 +#define MX1_PAD_A18__GPIO1_26 0x1a 0x032 +#define MX1_PAD_A19__A19 0x1b 0x004 +#define MX1_PAD_A19__GPIO1_27 0x1b 0x032 +#define MX1_PAD_A20__A20 0x1c 0x004 +#define MX1_PAD_A20__GPIO1_28 0x1c 0x032 +#define MX1_PAD_A21__A21 0x1d 0x004 +#define MX1_PAD_A21__GPIO1_29 0x1d 0x032 +#define MX1_PAD_A22__A22 0x1e 0x004 +#define MX1_PAD_A22__GPIO1_30 0x1e 0x032 +#define MX1_PAD_A23__A23 0x1f 0x004 +#define MX1_PAD_A23__GPIO1_31 0x1f 0x032 +#define MX1_PAD_SD_DAT0__SD_DAT0 0x28 0x000 +#define MX1_PAD_SD_DAT0__MS_PI0 0x28 0x001 +#define MX1_PAD_SD_DAT0__GPIO2_8 0x28 0x032 +#define MX1_PAD_SD_DAT1__SD_DAT1 0x29 0x000 +#define MX1_PAD_SD_DAT1__MS_PI1 0x29 0x001 +#define MX1_PAD_SD_DAT1__GPIO2_9 0x29 0x032 +#define MX1_PAD_SD_DAT2__SD_DAT2 0x2a 0x000 +#define MX1_PAD_SD_DAT2__MS_SCLKI 0x2a 0x001 +#define MX1_PAD_SD_DAT2__GPIO2_10 0x2a 0x032 +#define MX1_PAD_SD_DAT3__SD_DAT3 0x2b 0x000 +#define MX1_PAD_SD_DAT3__MS_SDIO 0x2b 0x001 +#define MX1_PAD_SD_DAT3__GPIO2_11 0x2b 0x032 +#define MX1_PAD_SD_SCLK__SD_SCLK 0x2c 0x004 +#define MX1_PAD_SD_SCLK__MS_SCLKO 0x2c 0x005 +#define MX1_PAD_SD_SCLK__GPIO2_12 0x2c 0x032 +#define MX1_PAD_SD_CMD__SD_CMD 0x2d 0x000 +#define MX1_PAD_SD_CMD__MS_BS 0x2d 0x005 +#define MX1_PAD_SD_CMD__GPIO2_13 0x2d 0x032 +#define MX1_PAD_SIM_SVEN__SIM_SVEN 0x2e 0x004 +#define MX1_PAD_SIM_SVEN__SSI_RXFS 0x2e 0x001 +#define MX1_PAD_SIM_SVEN__GPIO2_14 0x2e 0x032 +#define MX1_PAD_SIM_PD__SIM_PD 0x2f 0x000 +#define MX1_PAD_SIM_PD__SSI_RXCLK 0x2f 0x001 +#define MX1_PAD_SIM_PD__GPIO2_15 0x2f 0x032 +#define MX1_PAD_SIM_TX__SIM_TX 0x30 0x000 +#define MX1_PAD_SIM_TX__SSI_RXDAT 0x30 0x001 +#define MX1_PAD_SIM_TX__GPIO2_16 0x30 0x032 +#define MX1_PAD_SIM_RX__SIM_RX 0x31 0x000 +#define MX1_PAD_SIM_RX__SSI_TXDAT 0x31 0x005 +#define MX1_PAD_SIM_RX__GPIO2_17 0x31 0x032 +#define MX1_PAD_SIM_RST__SIM_RST 0x32 0x004 +#define MX1_PAD_SIM_RST__SSI_TXFS 0x32 0x001 +#define MX1_PAD_SIM_RST__GPIO2_18 0x32 0x032 +#define MX1_PAD_SIM_CLK__SIM_CLK 0x33 0x004 +#define MX1_PAD_SIM_CLK__SSI_TXCLK 0x33 0x001 +#define MX1_PAD_SIM_CLK__GPIO2_19 0x33 0x032 +#define MX1_PAD_USBD_AFE__USBD_AFE 0x34 0x004 +#define MX1_PAD_USBD_AFE__GPIO2_20 0x34 0x032 +#define MX1_PAD_USBD_OE__USBD_OE 0x35 0x004 +#define MX1_PAD_USBD_OE__GPIO2_21 0x35 0x032 +#define MX1_PAD_USBD_RCV__USBD_RCV 0x36 0x000 +#define MX1_PAD_USBD_RCV__GPIO2_22 0x36 0x032 +#define MX1_PAD_USBD_SUSPND__USBD_SUSPND 0x37 0x004 +#define MX1_PAD_USBD_SUSPND__GPIO2_23 0x37 0x032 +#define MX1_PAD_USBD_VP__USBD_VP 0x38 0x000 +#define MX1_PAD_USBD_VP__GPIO2_24 0x38 0x032 +#define MX1_PAD_USBD_VM__USBD_VM 0x39 0x000 +#define MX1_PAD_USBD_VM__GPIO2_25 0x39 0x032 +#define MX1_PAD_USBD_VPO__USBD_VPO 0x3a 0x004 +#define MX1_PAD_USBD_VPO__GPIO2_26 0x3a 0x032 +#define MX1_PAD_USBD_VMO__USBD_VMO 0x3b 0x004 +#define MX1_PAD_USBD_VMO__GPIO2_27 0x3b 0x032 +#define MX1_PAD_UART2_CTS__UART2_CTS 0x3c 0x004 +#define MX1_PAD_UART2_CTS__GPIO2_28 0x3c 0x032 +#define MX1_PAD_UART2_RTS__UART2_RTS 0x3d 0x000 +#define MX1_PAD_UART2_RTS__GPIO2_29 0x3d 0x032 +#define MX1_PAD_UART2_TXD__UART2_TXD 0x3e 0x004 +#define MX1_PAD_UART2_TXD__GPIO2_30 0x3e 0x032 +#define MX1_PAD_UART2_RXD__UART2_RXD 0x3f 0x000 +#define MX1_PAD_UART2_RXD__GPIO2_31 0x3f 0x032 +#define MX1_PAD_SSI_RXFS__SSI_RXFS 0x43 0x000 +#define MX1_PAD_SSI_RXFS__GPIO3_3 0x43 0x032 +#define MX1_PAD_SSI_RXCLK__SSI_RXCLK 0x44 0x000 +#define MX1_PAD_SSI_RXCLK__GPIO3_4 0x44 0x032 +#define MX1_PAD_SSI_RXDAT__SSI_RXDAT 0x45 0x000 +#define MX1_PAD_SSI_RXDAT__GPIO3_5 0x45 0x032 +#define MX1_PAD_SSI_TXDAT__SSI_TXDAT 0x46 0x004 +#define MX1_PAD_SSI_TXDAT__GPIO3_6 0x46 0x032 +#define MX1_PAD_SSI_TXFS__SSI_TXFS 0x47 0x000 +#define MX1_PAD_SSI_TXFS__GPIO3_7 0x47 0x032 +#define MX1_PAD_SSI_TXCLK__SSI_TXCLK 0x48 0x000 +#define MX1_PAD_SSI_TXCLK__GPIO3_8 0x48 0x032 +#define MX1_PAD_UART1_CTS__UART1_CTS 0x49 0x004 +#define MX1_PAD_UART1_CTS__GPIO3_9 0x49 0x032 +#define MX1_PAD_UART1_RTS__UART1_RTS 0x4a 0x000 +#define MX1_PAD_UART1_RTS__GPIO3_10 0x4a 0x032 +#define MX1_PAD_UART1_TXD__UART1_TXD 0x4b 0x004 +#define MX1_PAD_UART1_TXD__GPIO3_11 0x4b 0x032 +#define MX1_PAD_UART1_RXD__UART1_RXD 0x4c 0x000 +#define MX1_PAD_UART1_RXD__GPIO3_12 0x4c 0x032 +#define MX1_PAD_SPI1_RDY__SPI1_RDY 0x4d 0x000 +#define MX1_PAD_SPI1_RDY__GPIO3_13 0x4d 0x032 +#define MX1_PAD_SPI1_SCLK__SPI1_SCLK 0x4e 0x004 +#define MX1_PAD_SPI1_SCLK__GPIO3_14 0x4e 0x032 +#define MX1_PAD_SPI1_SS__SPI1_SS 0x4f 0x000 +#define MX1_PAD_SPI1_SS__GPIO3_15 0x4f 0x032 +#define MX1_PAD_SPI1_MISO__SPI1_MISO 0x50 0x000 +#define MX1_PAD_SPI1_MISO__GPIO3_16 0x50 0x032 +#define MX1_PAD_SPI1_MOSI__SPI1_MOSI 0x51 0x004 +#define MX1_PAD_SPI1_MOSI__GPIO3_17 0x51 0x032 +#define MX1_PAD_BT13__BT13 0x53 0x004 +#define MX1_PAD_BT13__SSI2_RXCLK 0x53 0x001 +#define MX1_PAD_BT13__GPIO3_19 0x53 0x032 +#define MX1_PAD_BT12__BT12 0x54 0x004 +#define MX1_PAD_BT12__SSI2_TXFS 0x54 0x001 +#define MX1_PAD_BT12__GPIO3_20 0x54 0x032 +#define MX1_PAD_BT11__BT11 0x55 0x004 +#define MX1_PAD_BT11__SSI2_TXCLK 0x55 0x001 +#define MX1_PAD_BT11__GPIO3_21 0x55 0x032 +#define MX1_PAD_BT10__BT10 0x56 0x004 +#define MX1_PAD_BT10__SSI2_TX 0x56 0x001 +#define MX1_PAD_BT10__GPIO3_22 0x56 0x032 +#define MX1_PAD_BT9__BT9 0x57 0x004 +#define MX1_PAD_BT9__SSI2_RX 0x57 0x001 +#define MX1_PAD_BT9__GPIO3_23 0x57 0x032 +#define MX1_PAD_BT8__BT8 0x58 0x004 +#define MX1_PAD_BT8__SSI2_RXFS 0x58 0x001 +#define MX1_PAD_BT8__GPIO3_24 0x58 0x032 +#define MX1_PAD_BT8__UART3_RI 0x58 0x016 +#define MX1_PAD_BT7__BT7 0x59 0x004 +#define MX1_PAD_BT7__GPIO3_25 0x59 0x032 +#define MX1_PAD_BT7__UART3_DSR 0x59 0x016 +#define MX1_PAD_BT6__BT6 0x5a 0x004 +#define MX1_PAD_BT6__GPIO3_26 0x5a 0x032 +#define MX1_PAD_BT6__SPI2_SS3 0x5a 0x016 +#define MX1_PAD_BT6__UART3_DTR 0x5a 0x022 +#define MX1_PAD_BT5__BT5 0x5b 0x000 +#define MX1_PAD_BT5__GPIO3_27 0x5b 0x032 +#define MX1_PAD_BT5__UART3_DCD 0x5b 0x016 +#define MX1_PAD_BT4__BT4 0x5c 0x000 +#define MX1_PAD_BT4__GPIO3_28 0x5c 0x032 +#define MX1_PAD_BT4__UART3_CTS 0x5c 0x016 +#define MX1_PAD_BT3__BT3 0x5d 0x000 +#define MX1_PAD_BT3__GPIO3_29 0x5d 0x032 +#define MX1_PAD_BT3__UART3_RTS 0x5d 0x022 +#define MX1_PAD_BT2__BT2 0x5e 0x004 +#define MX1_PAD_BT2__GPIO3_30 0x5e 0x032 +#define MX1_PAD_BT2__UART3_TX 0x5e 0x016 +#define MX1_PAD_BT1__BT1 0x5f 0x000 +#define MX1_PAD_BT1__GPIO3_31 0x5f 0x032 +#define MX1_PAD_BT1__UART3_RX 0x5f 0x022 +#define MX1_PAD_LSCLK__LSCLK 0x66 0x004 +#define MX1_PAD_LSCLK__GPIO4_6 0x66 0x032 +#define MX1_PAD_REV__REV 0x67 0x004 +#define MX1_PAD_REV__UART2_DTR 0x67 0x001 +#define MX1_PAD_REV__GPIO4_7 0x67 0x032 +#define MX1_PAD_REV__SPI2_CLK 0x67 0x006 +#define MX1_PAD_CLS__CLS 0x68 0x004 +#define MX1_PAD_CLS__UART2_DCD 0x68 0x005 +#define MX1_PAD_CLS__GPIO4_8 0x68 0x032 +#define MX1_PAD_CLS__SPI2_SS 0x68 0x002 +#define MX1_PAD_PS__PS 0x69 0x004 +#define MX1_PAD_PS__UART2_RI 0x69 0x005 +#define MX1_PAD_PS__GPIO4_9 0x69 0x032 +#define MX1_PAD_PS__SPI2_RXD 0x69 0x022 +#define MX1_PAD_SPL_SPR__SPL_SPR 0x6a 0x004 +#define MX1_PAD_SPL_SPR__UART2_DSR 0x6a 0x005 +#define MX1_PAD_SPL_SPR__GPIO4_10 0x6a 0x032 +#define MX1_PAD_SPL_SPR__SPI2_TXD 0x6a 0x006 +#define MX1_PAD_CONTRAST__CONTRAST 0x6b 0x004 +#define MX1_PAD_CONTRAST__GPIO4_11 0x6b 0x032 +#define MX1_PAD_CONTRAST__SPI2_SS2 0x6b 0x012 +#define MX1_PAD_ACD_OE__ACD_OE 0x6c 0x004 +#define MX1_PAD_ACD_OE__GPIO4_12 0x6c 0x032 +#define MX1_PAD_LP_HSYNC__LP_HSYNC 0x6d 0x004 +#define MX1_PAD_LP_HSYNC__GPIO4_13 0x6d 0x032 +#define MX1_PAD_FLM_VSYNC__FLM_VSYNC 0x6e 0x004 +#define MX1_PAD_FLM_VSYNC__GPIO4_14 0x6e 0x032 +#define MX1_PAD_LD0__LD0 0x6f 0x004 +#define MX1_PAD_LD0__GPIO4_15 0x6f 0x032 +#define MX1_PAD_LD1__LD1 0x70 0x004 +#define MX1_PAD_LD1__GPIO4_16 0x70 0x032 +#define MX1_PAD_LD2__LD2 0x71 0x004 +#define MX1_PAD_LD2__GPIO4_17 0x71 0x032 +#define MX1_PAD_LD3__LD3 0x72 0x004 +#define MX1_PAD_LD3__GPIO4_18 0x72 0x032 +#define MX1_PAD_LD4__LD4 0x73 0x004 +#define MX1_PAD_LD4__GPIO4_19 0x73 0x032 +#define MX1_PAD_LD5__LD5 0x74 0x004 +#define MX1_PAD_LD5__GPIO4_20 0x74 0x032 +#define MX1_PAD_LD6__LD6 0x75 0x004 +#define MX1_PAD_LD6__GPIO4_21 0x75 0x032 +#define MX1_PAD_LD7__LD7 0x76 0x004 +#define MX1_PAD_LD7__GPIO4_22 0x76 0x032 +#define MX1_PAD_LD8__LD8 0x77 0x004 +#define MX1_PAD_LD8__GPIO4_23 0x77 0x032 +#define MX1_PAD_LD9__LD9 0x78 0x004 +#define MX1_PAD_LD9__GPIO4_24 0x78 0x032 +#define MX1_PAD_LD10__LD10 0x79 0x004 +#define MX1_PAD_LD10__GPIO4_25 0x79 0x032 +#define MX1_PAD_LD11__LD11 0x7a 0x004 +#define MX1_PAD_LD11__GPIO4_26 0x7a 0x032 +#define MX1_PAD_LD12__LD12 0x7b 0x004 +#define MX1_PAD_LD12__GPIO4_27 0x7b 0x032 +#define MX1_PAD_LD13__LD13 0x7c 0x004 +#define MX1_PAD_LD13__GPIO4_28 0x7c 0x032 +#define MX1_PAD_LD14__LD14 0x7d 0x004 +#define MX1_PAD_LD14__GPIO4_29 0x7d 0x032 +#define MX1_PAD_LD15__LD15 0x7e 0x004 +#define MX1_PAD_LD15__GPIO4_30 0x7e 0x032 +#define MX1_PAD_TMR2OUT__TMR2OUT 0x7f 0x000 +#define MX1_PAD_TMR2OUT__GPIO4_31 0x7f 0x032 +#define MX1_PAD_TMR2OUT__SPI2_TXD 0x7f 0x006 + +#endif diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi new file mode 100644 index 000000000000..22f5d1db5b31 --- /dev/null +++ b/arch/arm/boot/dts/imx1.dtsi @@ -0,0 +1,266 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "skeleton.dtsi" +#include "imx1-pinfunc.h" + +#include <dt-bindings/clock/imx1-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + i2c0 = &i2c; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + spi0 = &cspi1; + spi1 = &cspi2; + }; + + aitc: aitc-interrupt-controller@00223000 { + compatible = "fsl,imx1-aitc", "fsl,avic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x00223000 0x1000>; + }; + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu: cpu@0 { + device_type = "cpu"; + compatible = "arm,arm920t"; + operating-points = <200000 1900000>; + clock-latency = <62500>; + clocks = <&clks IMX1_CLK_MCU>; + voltage-tolerance = <5>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&aitc>; + ranges; + + aipi@00200000 { + compatible = "fsl,aipi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00200000 0x10000>; + ranges; + + gpt1: timer@00202000 { + compatible = "fsl,imx1-gpt"; + reg = <0x00202000 0x1000>; + interrupts = <59>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + }; + + gpt2: timer@00203000 { + compatible = "fsl,imx1-gpt"; + reg = <0x00203000 0x1000>; + interrupts = <58>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + }; + + fb: fb@00205000 { + compatible = "fsl,imx1-fb"; + reg = <0x00205000 0x1000>; + interrupts = <14>; + clocks = <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_PER2>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + uart1: serial@00206000 { + compatible = "fsl,imx1-uart"; + reg = <0x00206000 0x1000>; + interrupts = <30 29 26>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@00207000 { + compatible = "fsl,imx1-uart"; + reg = <0x00207000 0x1000>; + interrupts = <24 23 20>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + pwm: pwm@00208000 { + #pwm-cells = <2>; + compatible = "fsl,imx1-pwm"; + reg = <0x00208000 0x1000>; + interrupts = <34>; + clocks = <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + }; + + dma: dma@00209000 { + compatible = "fsl,imx1-dma"; + reg = <0x00209000 0x1000>; + interrupts = <61 60>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_DMA_GATE>; + clock-names = "ipg", "ahb"; + #dma-cells = <1>; + }; + + uart3: serial@0020a000 { + compatible = "fsl,imx1-uart"; + reg = <0x0020a000 0x1000>; + interrupts = <54 4 1>; + clocks = <&clks IMX1_CLK_UART3_GATE>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + + aipi@00210000 { + compatible = "fsl,aipi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00210000 0x10000>; + ranges; + + cspi1: cspi@00213000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx1-cspi"; + reg = <0x00213000 0x1000>; + interrupts = <41>; + clocks = <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c: i2c@00217000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx1-i2c"; + reg = <0x00217000 0x1000>; + interrupts = <39>; + clocks = <&clks IMX1_CLK_HCLK>; + status = "disabled"; + }; + + cspi2: cspi@00219000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx1-cspi"; + reg = <0x00219000 0x1000>; + interrupts = <40>; + clocks = <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + clks: ccm@0021b000 { + compatible = "fsl,imx1-ccm"; + reg = <0x0021b000 0x1000>; + #clock-cells = <1>; + }; + + iomuxc: iomuxc@0021c000 { + compatible = "fsl,imx1-iomuxc"; + reg = <0x0021c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@0021c000 { + compatible = "fsl,imx1-gpio"; + reg = <0x0021c000 0x100>; + interrupts = <11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@0021c100 { + compatible = "fsl,imx1-gpio"; + reg = <0x0021c100 0x100>; + interrupts = <12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@0021c200 { + compatible = "fsl,imx1-gpio"; + reg = <0x0021c200 0x100>; + interrupts = <13>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@0021c300 { + compatible = "fsl,imx1-gpio"; + reg = <0x0021c300 0x100>; + interrupts = <62>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; + + weim: weim@00220000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,imx1-weim"; + reg = <0x00220000 0x1000>; + clocks = <&clks IMX1_CLK_DUMMY>; + ranges = < + 0 0 0x10000000 0x02000000 + 1 0 0x12000000 0x01000000 + 2 0 0x13000000 0x01000000 + 3 0 0x14000000 0x01000000 + 4 0 0x15000000 0x01000000 + 5 0 0x16000000 0x01000000 + >; + status = "disabled"; + }; + + esram: esram@00300000 { + compatible = "mmio-sram"; + reg = <0x00300000 0x20000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index a33f66c11b73..57e29977ba06 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -60,10 +60,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a>; lcd-supply = <®_lcd_3v3>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index 9238a95d8e62..88eebb15da6a 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -247,6 +247,7 @@ #define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x15 0x000 #define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x10 0x000 +#define MX25_PAD_CONTRAST__CC4 0x118 0x310 0x000 0x11 0x000 #define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x14 0x000 #define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x15 0x001 @@ -260,6 +261,7 @@ #define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000 #define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000 +#define MX25_PAD_CSI_D3__UART5_TXD_MUX 0x124 0x31c 0x000 0x11 0x000 #define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000 #define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001 @@ -269,31 +271,46 @@ #define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x17 0x000 #define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000 +#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x001 #define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x15 0x000 #define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x17 0x000 #define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x10 0x000 +#define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x12 0x001 #define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x15 0x000 #define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x10 0x000 +#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK 0x134 0x32C 0x4dc 0x12 0x001 #define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x15 0x000 #define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x10 0x000 +#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x12 0x001 #define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x15 0x000 +#define MX25_PAD_CSI_D8__CSPI3_SS2 0x138 0x330 0x4c4 0x17 0x000 #define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x10 0x000 +#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x12 0x001 #define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x15 0x000 +#define MX25_PAD_CSI_D9__CSPI3_SS3 0x13c 0x334 0x4c8 0x17 0x000 #define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x10 0x000 +#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x11 0x001 +#define MX25_PAD_CSI_MCLK__SDHC2_DAT0 0x140 0x338 0x4e4 0x12 0x001 #define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x15 0x000 #define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x10 0x000 +#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x11 0x001 +#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 0x144 0x33c 0x4e8 0x12 0x001 #define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x15 0x000 #define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x10 0x000 +#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x11 0x001 +#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 0x148 0x340 0x4ec 0x12 0x001 #define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x15 0x000 #define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x10 0x000 +#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x11 0x001 +#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 0x14c 0x344 0x4f0 0x12 0x001 #define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x15 0x000 #define MX25_PAD_I2C1_CLK__I2C1_CLK 0x150 0x348 0x000 0x10 0x000 @@ -303,18 +320,24 @@ #define MX25_PAD_I2C1_DAT__GPIO_1_13 0x154 0x34c 0x000 0x15 0x000 #define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI 0x158 0x350 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_MOSI__UART3_RXD 0x158 0x350 0x000 0x12 0x000 #define MX25_PAD_CSPI1_MOSI__GPIO_1_14 0x158 0x350 0x000 0x15 0x000 #define MX25_PAD_CSPI1_MISO__CSPI1_MISO 0x15c 0x354 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_MISO__UART3_TXD 0x15c 0x354 0x000 0x12 0x000 #define MX25_PAD_CSPI1_MISO__GPIO_1_15 0x15c 0x354 0x000 0x15 0x000 #define MX25_PAD_CSPI1_SS0__CSPI1_SS0 0x160 0x358 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_SS0__PWM2_PWMO 0x160 0x358 0x000 0x12 0x000 #define MX25_PAD_CSPI1_SS0__GPIO_1_16 0x160 0x358 0x000 0x15 0x000 #define MX25_PAD_CSPI1_SS1__CSPI1_SS1 0x164 0x35c 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_SS1__I2C3_DAT 0x164 0x35C 0x528 0x11 0x001 +#define MX25_PAD_CSPI1_SS1__UART3_RTS 0x164 0x35c 0x000 0x12 0x000 #define MX25_PAD_CSPI1_SS1__GPIO_1_17 0x164 0x35c 0x000 0x15 0x000 #define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK 0x168 0x360 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_SCLK__UART3_CTS 0x168 0x360 0x000 0x12 0x000 #define MX25_PAD_CSPI1_SCLK__GPIO_1_18 0x168 0x360 0x000 0x15 0x000 #define MX25_PAD_CSPI1_RDY__CSPI1_RDY 0x16c 0x364 0x000 0x10 0x000 @@ -328,6 +351,7 @@ #define MX25_PAD_UART1_RTS__UART1_RTS 0x178 0x370 0x000 0x10 0x000 #define MX25_PAD_UART1_RTS__CSI_D0 0x178 0x370 0x488 0x11 0x001 +#define MX25_PAD_UART1_RTS__CC3 0x178 0x370 0x000 0x12 0x000 #define MX25_PAD_UART1_RTS__GPIO_4_24 0x178 0x370 0x000 0x15 0x000 #define MX25_PAD_UART1_CTS__UART1_CTS 0x17c 0x374 0x000 0x10 0x000 @@ -342,6 +366,7 @@ #define MX25_PAD_UART2_RTS__UART2_RTS 0x188 0x380 0x000 0x10 0x000 #define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x12 0x002 +#define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x13 0x000 #define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x15 0x000 #define MX25_PAD_UART2_CTS__FEC_RX_ER 0x18c 0x384 0x518 0x12 0x002 @@ -349,14 +374,17 @@ #define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x15 0x000 #define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000 +#define MX25_PAD_SD1_CMD__CSPI2_MOSI 0x190 0x388 0x4a0 0x11 0x001 #define MX25_PAD_SD1_CMD__FEC_RDATA2 0x190 0x388 0x50c 0x12 0x002 #define MX25_PAD_SD1_CMD__GPIO_2_23 0x190 0x388 0x000 0x15 0x000 #define MX25_PAD_SD1_CLK__SD1_CLK 0x194 0x38c 0x000 0x10 0x000 +#define MX25_PAD_SD1_CLK__CSPI2_MISO 0x194 0x38c 0x49c 0x11 0x001 #define MX25_PAD_SD1_CLK__FEC_RDATA3 0x194 0x38c 0x510 0x12 0x002 #define MX25_PAD_SD1_CLK__GPIO_2_24 0x194 0x38c 0x000 0x15 0x000 #define MX25_PAD_SD1_DATA0__SD1_DATA0 0x198 0x390 0x000 0x10 0x000 +#define MX25_PAD_SD1_DATA0__CSPI2_SCLK 0x198 0x390 0x494 0x11 0x001 #define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x15 0x000 #define MX25_PAD_SD1_DATA1__SD1_DATA1 0x19c 0x394 0x000 0x10 0x000 @@ -457,14 +485,15 @@ #define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x16 0x000 #define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x10 0x000 -#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x02 0x000 #define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x16 0x001 #define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x10 0x000 -#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x02 0x000 +#define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x11 0x002 +#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x12 0x000 #define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x14 0x000 #define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x10 0x000 +#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x12 0x000 #define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x14 0x000 #define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x10 0x000 diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index c1740396b2c9..58d3c3cf2923 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -239,6 +239,7 @@ }; ssi2: ssi@50014000 { + #sound-dai-cells = <0>; compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; reg = <0x50014000 0x4000>; interrupts = <11>; @@ -274,6 +275,7 @@ }; ssi1: ssi@50034000 { + #sound-dai-cells = <0>; compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; reg = <0x50034000 0x4000>; interrupts = <12>; @@ -453,7 +455,7 @@ }; sdma: sdma@53fd4000 { - compatible = "fsl,imx25-sdma", "fsl,imx35-sdma"; + compatible = "fsl,imx25-sdma"; reg = <0x53fd4000 0x4000>; clocks = <&clks 112>, <&clks 68>; clock-names = "ipg", "ahb"; diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index 2b6d489dae69..da306c5dd678 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -67,6 +67,16 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>; status = "okay"; + + adc@0 { + compatible = "maxim,max1027"; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max1027>; + spi-max-frequency = <10000000>; + }; }; &cspi2 { @@ -189,6 +199,13 @@ >; }; + pinctrl_max1027: max1027 { + fsl,pins = < + MX27_PAD_UART1_CTS__GPIO5_14 0x0 /* CNVST */ + MX27_PAD_UART1_RTS__GPIO5_15 0x0 /* EOC */ + >; + }; + pinctrl_pwm: pwmgrp { fsl,pins = < MX27_PAD_PWMO__PWMO 0x0 diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 221cac4fb2cd..1f38a052ad4b 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -83,10 +83,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_16bit_pins_a &lcdif_pins_apf28dev>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <16>; bus-width = <16>; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index e1ce9179db63..1092b761d7ac 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -94,10 +94,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_apx4>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 7d51459de5e8..ef944b6d4f01 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -177,10 +177,10 @@ pinctrl-0 = <&lcdif_18bit_pins_cfa10049 &lcdif_pins_cfa10049 &lcdif_pins_cfa10049_pullup>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <18>; diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts index c3900e7ba331..6a34114bec29 100644 --- a/arch/arm/boot/dts/imx28-cfa10055.dts +++ b/arch/arm/boot/dts/imx28-cfa10055.dts @@ -92,10 +92,10 @@ pinctrl-0 = <&lcdif_18bit_pins_cfa10055 &lcdif_pins_cfa10055 &lcdif_pins_cfa10055_pullup>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <18>; diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts index cef959a97219..ba6495ca44d2 100644 --- a/arch/arm/boot/dts/imx28-cfa10056.dts +++ b/arch/arm/boot/dts/imx28-cfa10056.dts @@ -64,10 +64,10 @@ pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_cfa10056 &lcdif_pins_cfa10056_pullup >; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts index c4e00ce4b6da..5df0b24eaf59 100644 --- a/arch/arm/boot/dts/imx28-cfa10057.dts +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -78,10 +78,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_18bit_pins_cfa10057 &lcdif_pins_cfa10057>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <18>; diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts index 7c9cc783f0d1..f5c6dce34abe 100644 --- a/arch/arm/boot/dts/imx28-cfa10058.dts +++ b/arch/arm/boot/dts/imx28-cfa10058.dts @@ -51,10 +51,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_cfa10058>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index e4cc44c98585..09664fcf5afb 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -124,10 +124,10 @@ pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_evk>; lcd-supply = <®_lcd_3v3>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index 9348ce59dda4..2df63bee6f4e 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -115,10 +115,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_m28>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display0 { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index b3c09ae3b928..e35cc6ba3ca6 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -81,10 +81,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_m28>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <16>; bus-width = <18>; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index e14bd86f3e99..a5b27c85a91c 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -21,12 +21,15 @@ aliases { can0 = &can0; can1 = &can1; - display = &display; + display = &display0; ds1339 = &ds1339; gpio5 = &gpio5; lcdif = &lcdif; lcdif_23bit_pins = &tx28_lcdif_23bit_pins; lcdif_24bit_pins = &lcdif_24bit_pins_a; + reg_can_xcvr = ®_can_xcvr; + spi_gpio = &spi_gpio; + spi_mxs = &ssp3; stk5led = &user_led; usbotg = &usb0; }; @@ -37,7 +40,7 @@ onewire { compatible = "w1-gpio"; - gpios = <&gpio2 7 0>; + gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -52,7 +55,7 @@ regulator-name = "usb0_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio0 18 0>; + gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -62,7 +65,7 @@ regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 27 0>; + gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -90,7 +93,7 @@ regulator-name = "CAN XCVR"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio1 0 0>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&tx28_flexcan_xcvr_pins>; }; @@ -101,7 +104,7 @@ regulator-name = "LCD POWER"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio1 31 0>; + gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -111,7 +114,7 @@ regulator-name = "LCD RESET"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio3 30 0>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; startup-delay-us = <300000>; enable-active-high; regulator-always-on; @@ -143,7 +146,7 @@ user_led: user { label = "Heartbeat"; - gpios = <&gpio4 10 0>; + gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -172,16 +175,16 @@ matrix_keypad: matrix-keypad@0 { compatible = "gpio-matrix-keypad"; col-gpios = < - &gpio5 0 0 - &gpio5 1 0 - &gpio5 2 0 - &gpio5 3 0 + &gpio5 0 GPIO_ACTIVE_HIGH + &gpio5 1 GPIO_ACTIVE_HIGH + &gpio5 2 GPIO_ACTIVE_HIGH + &gpio5 3 GPIO_ACTIVE_HIGH >; row-gpios = < - &gpio5 4 0 - &gpio5 5 0 - &gpio5 6 0 - &gpio5 7 0 + &gpio5 4 GPIO_ACTIVE_HIGH + &gpio5 5 GPIO_ACTIVE_HIGH + &gpio5 6 GPIO_ACTIVE_HIGH + &gpio5 7 GPIO_ACTIVE_HIGH >; /* sample keymap */ linux,keymap = < @@ -203,6 +206,44 @@ col-scan-delay-us = <5000>; linux,no-autorepeat; }; + + spi_gpio: spi-gpio { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&tx28_spi_gpio_pins>; + + gpio-sck = <&gpio2 24 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio2 25 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio2 26 GPIO_ACTIVE_HIGH>; + num-chipselects = <3>; + cs-gpios = < + &gpio2 27 GPIO_ACTIVE_LOW + &gpio3 8 GPIO_ACTIVE_LOW + &gpio3 9 GPIO_ACTIVE_LOW + >; + /* enable this and disable ssp3 below, if you need full duplex SPI transfer */ + status = "disabled"; + + spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <57600000>; + }; + + spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <57600000>; + }; + + spi@2 { + compatible = "spidev"; + reg = <2>; + spi-max-frequency = <57600000>; + }; + }; }; /* 2nd TX-Std UART - (A)UART1 */ @@ -284,8 +325,8 @@ pinctrl-0 = <&tx28_edt_ft5x06_pins>; interrupt-parent = <&gpio2>; interrupts = <5 0>; - reset-gpios = <&gpio2 6 1>; - wake-gpios = <&gpio4 9 0>; + reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; }; touchscreen: tsc2007@48 { @@ -295,7 +336,7 @@ pinctrl-0 = <&tx28_tsc2007_pins>; interrupt-parent = <&gpio3>; interrupts = <20 0>; - pendown-gpio = <&gpio3 20 1>; + pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = /bits/ 16 <660>; }; @@ -309,10 +350,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>; lcd-supply = <®_lcd>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display@0 { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; display-timings { @@ -558,6 +599,20 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + tx28_spi_gpio_pins: spi-gpiogrp { + fsl,pinmux-ids = < + MX28_PAD_AUART2_RX__GPIO_3_8 + MX28_PAD_AUART2_TX__GPIO_3_9 + MX28_PAD_SSP3_SCK__GPIO_2_24 + MX28_PAD_SSP3_MOSI__GPIO_2_25 + MX28_PAD_SSP3_MISO__GPIO_2_26 + MX28_PAD_SSP3_SS0__GPIO_2_27 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + tx28_tsc2007_pins: tx28-tsc2007-pins { fsl,pinmux-ids = < MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */ @@ -619,17 +674,23 @@ clock-frequency = <57600000>; status = "okay"; - spidev0: spi@0 { + spi@0 { compatible = "spidev"; reg = <0>; spi-max-frequency = <57600000>; }; - spidev1: spi@1 { + spi@1 { compatible = "spidev"; reg = <1>; spi-max-frequency = <57600000>; }; + + spi@2 { + compatible = "spidev"; + reg = <2>; + spi-max-frequency = <57600000>; + }; }; &usb0 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index a95cc5358ff4..47f68ac868d4 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -489,6 +489,38 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + mmc1_4bit_pins_a: mmc1-4bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D00__SSP1_D0 + MX28_PAD_GPMI_D01__SSP1_D1 + MX28_PAD_GPMI_D02__SSP1_D2 + MX28_PAD_GPMI_D03__SSP1_D3 + MX28_PAD_GPMI_RDY1__SSP1_CMD + MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT + MX28_PAD_GPMI_WRN__SSP1_SCK + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + mmc1_cd_cfg: mmc1-cd-cfg { + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT + >; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc1_sck_cfg: mmc1-sck-cfg { + fsl,pinmux-ids = < + MX28_PAD_GPMI_WRN__SSP1_SCK + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc2_4bit_pins_a: mmc2-4bit@0 { reg = <0>; fsl,pinmux-ids = < @@ -553,6 +585,17 @@ fsl,pull-up = <MXS_PULL_ENABLE>; }; + i2c1_pins_b: i2c1@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_AUART2_CTS__I2C1_SCL + MX28_PAD_AUART2_RTS__I2C1_SDA + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + saif0_pins_a: saif0@0 { reg = <0>; fsl,pinmux-ids = < diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 442e216ca9d9..6932928f3b45 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -114,6 +114,7 @@ }; ssi1: ssi@43fa0000 { + #sound-dai-cells = <0>; compatible = "fsl,imx35-ssi", "fsl,imx21-ssi"; reg = <0x43fa0000 0x4000>; interrupts = <11>; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index c0e0f60ab6b2..620b0f030591 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -145,6 +145,7 @@ }; ssi2: ssi@50014000 { + #sound-dai-cells = <0>; compatible = "fsl,imx50-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; @@ -454,6 +455,7 @@ }; ssi1: ssi@63fcc000 { + #sound-dai-cells = <0>; compatible = "fsl,imx50-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x63fcc000 0x4000>; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 17c05a6fa776..92660e1fe1fc 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -210,6 +210,7 @@ }; ssi2: ssi@70014000 { + #sound-dai-cells = <0>; compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x70014000 0x4000>; interrupts = <30>; @@ -499,6 +500,7 @@ }; ssi1: ssi@83fcc000 { + #sound-dai-cells = <0>; compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fcc000 0x4000>; interrupts = <29>; @@ -554,6 +556,7 @@ }; ssi3: ssi@83fe8000 { + #sound-dai-cells = <0>; compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fe8000 0x4000>; interrupts = <96>; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 5ec1590ff7bc..1d325576bcc0 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -265,7 +265,7 @@ }; pmic: dialog@48 { - compatible = "dialog,da9053", "dialog,da9052"; + compatible = "dlg,da9053", "dlg,da9052"; reg = <0x48>; }; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 6b675a02066f..f91725b2e8ab 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -221,6 +221,7 @@ }; ssi2: ssi@50014000 { + #sound-dai-cells = <0>; compatible = "fsl,imx53-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; @@ -669,6 +670,7 @@ }; ssi1: ssi@63fcc000 { + #sound-dai-cells = <0>; compatible = "fsl,imx53-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x63fcc000 0x4000>; @@ -696,6 +698,7 @@ }; ssi3: ssi@63fe8000 { + #sound-dai-cells = <0>; compatible = "fsl,imx53-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x63fe8000 0x4000>; @@ -752,5 +755,10 @@ reg = <0xf8000000 0x20000>; clocks = <&clks IMX5_CLK_OCRAM>; }; + + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <77>; + }; }; }; diff --git a/arch/arm/boot/dts/imx6dl-gw552x.dts b/arch/arm/boot/dts/imx6dl-gw552x.dts new file mode 100644 index 000000000000..a4b700cef188 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-gw552x.dts @@ -0,0 +1,20 @@ +/* + * Copyright 2014 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-gw552x.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 DualLite/Solo GW552X"; + compatible = "gw,imx6dl-gw552x", "gw,ventana", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 71598546087f..44a0e6736bb1 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -1,206 +1,13 @@ /* - * Copyright (C) 2013,2014 Russell King + * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) + * Based on dt work by Russell King */ /dts-v1/; #include "imx6dl.dtsi" -#include "imx6qdl-microsom.dtsi" -#include "imx6qdl-microsom-ar8035.dtsi" +#include "imx6qdl-hummingboard.dtsi" / { - model = "SolidRun HummingBoard DL/Solo"; - compatible = "solidrun,hummingboard", "fsl,imx6dl"; - - chosen { - stdout-path = &uart1; - }; - - ir_recv: ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio1 2 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_gpio1_2>; - }; - - regulators { - compatible = "simple-bus"; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_usbh1_vbus: usb-h1-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 0 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usbotg_vbus: usb-otg-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 22 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - }; - - sound-spdif { - compatible = "fsl,imx-audio-spdif"; - model = "On-board SPDIF"; - /* IMX6 doesn't implement this yet */ - spdif-controller = <&spdif>; - spdif-out; - }; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_flexcan1>; - status = "okay"; -}; - -&hdmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_hdmi>; - ddc-i2c-bus = <&i2c2>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_i2c1>; - - /* - * Not fitted on Carrier-1 board... yet - status = "okay"; - - rtc: pcf8523@68 { - compatible = "nxp,pcf8523"; - reg = <0x68>; - }; - */ -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_i2c2>; - status = "okay"; -}; - -&iomuxc { - hummingboard { - pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { - fsl,pins = < - MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000 - MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000 - >; - }; - - pinctrl_hummingboard_gpio1_2: hummingboard-gpio1_2 { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 - >; - }; - - pinctrl_hummingboard_hdmi: hummingboard-hdmi { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 - >; - }; - - pinctrl_hummingboard_i2c1: hummingboard-i2c1 { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; - - pinctrl_hummingboard_i2c2: hummingboard-i2c2 { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_hummingboard_spdif: hummingboard-spdif { - fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; - }; - - pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus { - fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; - }; - - pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { - /* - * Similar to pinctrl_usbotg_2, but we want it - * pulled down for a fixed host connection. - */ - fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; - }; - - pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { - fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; - }; - - pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 - >; - }; - - pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 - >; - }; - }; -}; - -&spdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_spdif>; - status = "okay"; -}; - -&usbh1 { - disable-over-current; - vbus-supply = <®_usbh1_vbus>; - status = "okay"; -}; - -&usbotg { - disable-over-current; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; - vbus-supply = <®_usbotg_vbus>; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = < - &pinctrl_hummingboard_usdhc2_aux - &pinctrl_hummingboard_usdhc2 - >; - vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio1 4 0>; - status = "okay"; + model = "SolidRun HummingBoard Solo/DualLite"; + compatible = "solidrun,hummingboard/dl", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 22e6f8e657d2..822ffb231c57 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -10,6 +10,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx6q.dtsi" / { @@ -18,7 +19,6 @@ /* these are used by bootloader for disabling nodes */ aliases { - ethernet0 = &fec; ethernet1 = ð1; i2c0 = &i2c1; i2c1 = &i2c2; @@ -26,12 +26,10 @@ led0 = &led0; led1 = &led1; led2 = &led2; - sky2 = ð1; ssi0 = &ssi1; spi0 = &ecspi1; usb0 = &usbh1; usb1 = &usbotg; - usdhc2 = &usdhc3; }; chosen { @@ -40,23 +38,25 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */ + gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */ default-state = "off"; }; }; @@ -67,7 +67,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 5 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -109,7 +111,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -137,7 +139,7 @@ &ecspi1 { fsl,spi-num-chipselects = <1>; - cs-gpios = <&gpio3 19 0>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; @@ -153,7 +155,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -199,11 +201,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -314,16 +311,6 @@ }; }; }; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pciclkgen: si52147@6b { - compatible = "sil,si52147"; - reg = <0x6b>; - }; }; &i2c3 { @@ -345,51 +332,73 @@ VDDIO-supply = <®_3p3v>; }; - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - touchscreen: egalax_ts@04 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; + interrupts = <12 2>; + wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; +}; - videoout: adv7393@2a { - compatible = "adi,adv7393"; - reg = <0x2a>; - }; +&ldb { + status = "okay"; +}; + +&pcie { + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; + eth1: sky2@8 { /* MAC/PHY on bus 8 */ + compatible = "marvell,sky2"; }; }; -&iomuxc { +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usdhc3 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; +&iomuxc { imx6q-gw5400-a { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ - MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ - >; - }; pinctrl_audmux: audmuxgrp { fsl,pins = < @@ -397,6 +406,7 @@ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -405,6 +415,7 @@ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */ >; }; @@ -429,6 +440,14 @@ >; }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */ + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 @@ -450,6 +469,19 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -474,6 +506,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ >; }; @@ -489,59 +522,3 @@ }; }; }; - -&ldb { - status = "okay"; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; -}; - -&ssi1 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6q-gw552x.dts b/arch/arm/boot/dts/imx6q-gw552x.dts new file mode 100644 index 000000000000..f87a8fa6e04d --- /dev/null +++ b/arch/arm/boot/dts/imx6q-gw552x.dts @@ -0,0 +1,24 @@ +/* + * Copyright 2014 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-gw552x.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Dual/Quad GW552X"; + compatible = "gw,imx6q-gw552x", "gw,ventana", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts new file mode 100644 index 000000000000..c2bf8476ce45 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-hummingboard.dts @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) + * Based on dt work by Russell King + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-hummingboard.dtsi" + +/ { + model = "SolidRun HummingBoard Dual/Quad"; + compatible = "solidrun,hummingboard/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1025>; + fsl,transmit-boost-mdB = <3330>; + fsl,transmit-atten-16ths = <9>; + fsl,receive-eq-mdB = <3000>; +}; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 0db15af41cb1..f2867c4b34a8 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -9,11 +9,11 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> + / { /* these are used by bootloader for disabling nodes */ aliases { - can0 = &can1; - ethernet0 = &fec; led0 = &led0; led1 = &led1; nand = &gpmi; @@ -27,17 +27,19 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; }; @@ -48,7 +50,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -81,7 +85,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -91,7 +95,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -143,11 +147,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -159,53 +158,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - - pmic: ltc3676@3c { - compatible = "lltc,ltc3676"; - reg = <0x3c>; - - regulators { - sw1_reg: ltc3676__sw1 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: ltc3676__sw2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: ltc3676__sw3 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: ltc3676__sw4 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ltc3676__ldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4_reg: ltc3676__ldo4 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; }; &i2c3 { @@ -213,31 +165,53 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; +}; - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; + status = "okay"; }; -&iomuxc { +&uart1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; - imx6qdl-gw51xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ - MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - >; - }; +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw51xx { pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 @@ -256,6 +230,14 @@ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 >; }; @@ -301,6 +283,18 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -332,48 +326,8 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ >; }; }; }; - -&pcie { - reset-gpio = <&gpio1 0 0>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 234e7b755232..d3c0bf5c84e3 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -9,10 +9,11 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> + / { /* these are used by bootloader for disabling nodes */ aliases { - ethernet0 = &fec; led0 = &led0; led1 = &led1; led2 = &led2; @@ -20,7 +21,6 @@ ssi0 = &ssi1; usb0 = &usbh1; usb1 = &usbotg; - usdhc2 = &usdhc3; }; chosen { @@ -36,23 +36,25 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ default-state = "off"; }; }; @@ -63,7 +65,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -115,7 +119,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -141,11 +145,17 @@ status = "okay"; }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -197,11 +207,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -213,65 +218,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pmic: ltc3676@3c { - compatible = "lltc,ltc3676"; - reg = <0x3c>; - - regulators { - sw1_reg: ltc3676__sw1 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: ltc3676__sw2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: ltc3676__sw3 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: ltc3676__sw4 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ltc3676__ldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo3_reg: ltc3676__ldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4_reg: ltc3676__ldo4 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; }; &i2c3 { @@ -280,11 +226,6 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - accelerometer: fxos8700@1e { - compatible = "fsl,fxos8700"; - reg = <0x13>; - }; - codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; @@ -297,49 +238,101 @@ compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; + interrupts = <12 2>; + wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; +}; + +&ldb { + status = "okay"; - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; }; }; -&iomuxc { +&pcie { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; - imx6qdl-gw52xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ - MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USB_SEL_PCI */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */ - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */ - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */ - >; - }; +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; +&iomuxc { + imx6qdl-gw52xx { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -361,6 +354,23 @@ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 >; }; @@ -406,6 +416,18 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE_RST# */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 @@ -436,6 +458,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ >; }; @@ -447,85 +470,8 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */ >; }; }; }; - -&ldb { - status = "okay"; - - lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - }; - }; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&ssi1 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 143f84f7812c..cade1bdc97e9 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -9,21 +9,19 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> + / { /* these are used by bootloader for disabling nodes */ aliases { - can0 = &can1; - ethernet0 = &fec; ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; nand = &gpmi; - sky2 = ð1; ssi0 = &ssi1; usb0 = &usbh1; usb1 = &usbotg; - usdhc2 = &usdhc3; }; chosen { @@ -39,23 +37,25 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ default-state = "off"; }; }; @@ -66,7 +66,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -118,7 +120,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -154,7 +156,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -206,11 +208,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -222,77 +219,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - - pciclkgen: si53156@6b { - compatible = "sil,si53156"; - reg = <0x6b>; - }; - - pciswitch: pex8606@3f { - compatible = "plx,pex8606"; - reg = <0x3f>; - }; - - pmic: ltc3676@3c { - compatible = "lltc,ltc3676"; - reg = <0x3c>; - - regulators { - /* VDD_SOC */ - sw1_reg: ltc3676__sw1 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_1P8 */ - sw2_reg: ltc3676__sw2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_ARM */ - sw3_reg: ltc3676__sw3 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_DDR */ - sw4_reg: ltc3676__sw4 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_2P5 */ - ldo2_reg: ltc3676__ldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_1P8 */ - ldo3_reg: ltc3676__ldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_HIGH */ - ldo4_reg: ltc3676__ldo4 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; }; &i2c3 { @@ -301,11 +227,6 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - accelerometer: fxos8700@1e { - compatible = "fsl,fxos8700"; - reg = <0x1e>; - }; - codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; @@ -314,65 +235,110 @@ VDDIO-supply = <®_3p3v>; }; - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - touchscreen: egalax_ts@04 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; - interrupts = <11 2>; /* gpio1_11 active low */ - wakeup-gpios = <&gpio1 11 0>; + interrupts = <11 2>; + wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; +}; - videoout: adv7393@2a { - compatible = "adi,adv7393"; - reg = <0x2a>; +&ldb { + status = "okay"; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; }; +}; - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; + + eth1: sky2@8 { /* MAC/PHY on bus 8 */ + compatible = "marvell,sky2"; }; }; -&iomuxc { +&pwm4 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; - imx6qdl-gw53xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* PCIE6EXP_DIO0 */ - MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* PCIE6EXP_DIO1 */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_SHDN */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */ - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000 /* PMIC_IRQ# */ - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x80000000 /* HUB_RST# */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* PCIE_WDIS# */ - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000 /* ACCEL_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x80000000 /* USBOTG_OC# */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* TOUCH_IRQ# */ - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_DET# */ - >; - }; +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw53xx { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -399,8 +365,17 @@ pinctrl_flexcan1: flexcan1grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 >; }; @@ -446,6 +421,19 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 @@ -476,6 +464,8 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ >; }; @@ -487,90 +477,8 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */ >; }; }; }; - -&ldb { - status = "okay"; - - lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - }; - }; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&ssi1 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 16e7ad3d98ad..cf13239a1619 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -9,21 +9,19 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> + / { /* these are used by bootloader for disabling nodes */ aliases { - can0 = &can1; - ethernet0 = &fec; ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; nand = &gpmi; - sky2 = ð1; ssi0 = &ssi1; usb0 = &usbh1; usb1 = &usbotg; - usdhc2 = &usdhc3; }; chosen { @@ -39,23 +37,25 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ default-state = "off"; }; }; @@ -66,7 +66,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -108,7 +110,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -144,7 +146,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -196,11 +198,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -311,16 +308,6 @@ }; }; }; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pciclkgen: si52147@6b { - compatible = "sil,si52147"; - reg = <0x6b>; - }; }; &i2c3 { @@ -329,11 +316,6 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - accelerometer: fxos8700@1e { - compatible = "fsl,fxos8700"; - reg = <0x1e>; - }; - codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; @@ -342,59 +324,115 @@ VDDIO-supply = <®_3p3v>; }; - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - touchscreen: egalax_ts@04 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; + interrupts = <12 2>; + wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; +}; - videoout: adv7393@2a { - compatible = "adi,adv7393"; - reg = <0x2a>; +&ldb { + status = "okay"; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; + eth1: sky2@8 { /* MAC/PHY on bus 8 */ + compatible = "marvell,sky2"; }; }; -&iomuxc { +&pwm4 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; - imx6qdl-gw54xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ - MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ - >; - }; +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&ssi2 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; +&iomuxc { + imx6qdl-gw54xx { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -421,8 +459,17 @@ pinctrl_flexcan1: flexcan1grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 >; }; @@ -468,6 +515,19 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 @@ -498,6 +558,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ >; }; @@ -513,90 +574,3 @@ }; }; }; - -&ldb { - status = "okay"; - - lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - }; - }; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&ssi1 { - status = "okay"; -}; - -&ssi2 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi new file mode 100644 index 000000000000..5c6587f6c420 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -0,0 +1,267 @@ +/* + * Copyright 2014 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + /* these are used by bootloader for disabling nodes */ + aliases { + led0 = &led0; + led1 = &led1; + led2 = &led2; + nand = &gpmi; + usb0 = &usbh1; + usb1 = &usbotg; + }; + + chosen { + bootargs = "console=ttymxc1,115200"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ + default-state = "off"; + }; + + led2: user3 { + label = "user3"; + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ + default-state = "off"; + }; + }; + + memory { + reg = <0x10000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_1p0v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + reg_3p3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0v: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom1: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom2: eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom3: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom4: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc: ds1672@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; }; + +&usbh1 { + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw552x { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi new file mode 100644 index 000000000000..62841e85a91e --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -0,0 +1,200 @@ +/* + * Copyright (C) 2013,2014 Russell King + */ +#include "imx6qdl-microsom.dtsi" +#include "imx6qdl-microsom-ar8035.dtsi" + +/ { + chosen { + stdout-path = &uart1; + }; + + ir_recv: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio3 5 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usbh1_vbus: usb-h1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg_vbus: usb-otg-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "On-board SPDIF"; + /* IMX6 doesn't implement this yet */ + spdif-controller = <&spdif>; + spdif-out; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_flexcan1>; + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_i2c1>; + + /* + * Not fitted on Carrier-1 board... yet + status = "okay"; + + rtc: pcf8523@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; + */ +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_i2c2>; + status = "okay"; +}; + +&iomuxc { + hummingboard { + pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { + fsl,pins = < + MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000 + MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000 + >; + }; + + pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5 { + fsl,pins = < + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1 + >; + }; + + pinctrl_hummingboard_hdmi: hummingboard-hdmi { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_hummingboard_i2c1: hummingboard-i2c1 { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard_i2c2: hummingboard-i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard_spdif: hummingboard-spdif { + fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; + }; + + pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus { + fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; + }; + + pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { + /* + * Similar to pinctrl_usbotg_2, but we want it + * pulled down for a fixed host connection. + */ + fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + }; + + pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { + fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; + }; + + pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + >; + }; + + pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 + >; + }; + }; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_spdif>; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + vbus-supply = <®_usbh1_vbus>; + status = "okay"; +}; + +&usbotg { + disable-over-current; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_hummingboard_usdhc2_aux + &pinctrl_hummingboard_usdhc2 + >; + vmmc-supply = <®_3p3v>; + cd-gpios = <&gpio1 4 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 42ff525ebe13..08218120e770 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -174,6 +174,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -187,6 +192,25 @@ VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; + + rtc: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; }; &iomuxc { @@ -266,6 +290,20 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 2694aa84e187..0e50bb0a6b94 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -83,7 +83,7 @@ }; pmic@58 { - compatible = "dialog,da9063"; + compatible = "dlg,da9063"; reg = <0x58>; interrupt-parent = <&gpio4>; interrupts = <17 0x8>; /* active-low GPIO4_17 */ diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index ec43dde78525..baf2f00d519a 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -54,6 +54,19 @@ gpio = <&gpio4 10 0>; enable-active-high; }; + + reg_pcie: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 19 0>; + regulator-always-on; + enable-active-high; + }; }; gpio-keys { @@ -314,15 +327,15 @@ imx6qdl-sabresd { pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 - MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 - MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 >; }; @@ -367,9 +380,9 @@ pinctrl_gpio_keys: gpio_keysgrp { fsl,pins = < - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 >; }; @@ -396,7 +409,13 @@ pinctrl_pcie: pciegrp { fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; + + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 >; }; @@ -468,7 +487,7 @@ gpio_leds { pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index c701af958006..9596ed5867e6 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -137,7 +137,9 @@ pcie: pcie@0x01000000 { compatible = "fsl,imx6q-pcie", "snps,dw-pcie"; - reg = <0x01ffc000 0x4000>; /* DBI */ + reg = <0x01ffc000 0x04000>, + <0x01f00000 0x80000>; + reg-names = "dbi", "config"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -273,11 +275,14 @@ }; ssi1: ssi@02028000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_SSI1_IPG>; + clocks = <&clks IMX6QDL_CLK_SSI1_IPG>, + <&clks IMX6QDL_CLK_SSI1>; + clock-names = "ipg", "baud"; dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; dma-names = "rx", "tx"; @@ -286,11 +291,14 @@ }; ssi2: ssi@0202c000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_SSI2_IPG>; + clocks = <&clks IMX6QDL_CLK_SSI2_IPG>, + <&clks IMX6QDL_CLK_SSI2>; + clock-names = "ipg", "baud"; dmas = <&sdma 41 1 0>, <&sdma 42 1 0>; dma-names = "rx", "tx"; @@ -299,11 +307,14 @@ }; ssi3: ssi@02030000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_SSI3_IPG>; + clocks = <&clks IMX6QDL_CLK_SSI3_IPG>, + <&clks IMX6QDL_CLK_SSI3>; + clock-names = "ipg", "baud"; dmas = <&sdma 45 1 0>, <&sdma 46 1 0>; dma-names = "rx", "tx"; @@ -396,8 +407,9 @@ reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_GPT_IPG>, - <&clks IMX6QDL_CLK_GPT_IPG_PER>; - clock-names = "ipg", "per"; + <&clks IMX6QDL_CLK_GPT_IPG_PER>, + <&clks IMX6QDL_CLK_GPT_3M>; + clock-names = "ipg", "per", "osc_per"; }; gpio1: gpio@0209c000 { diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 3f9e041c0252..898d14fd765f 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -20,6 +20,13 @@ reg = <0x80000000 0x40000000>; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -74,6 +81,14 @@ regulator-max-microvolt = <4325000>; regulator-boot-on; }; + + reg_lcd_3v3: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-3v3"; + gpio = <&gpio4 3 0>; + enable-active-high; + }; }; sound { @@ -329,12 +344,6 @@ >; }; - pinctrl_led: ledgrp { - fsl,pins = < - MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059 - >; - }; - pinctrl_kpp: kppgrp { fsl,pins = < MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x1b010 @@ -346,6 +355,51 @@ >; }; + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0 + MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0 + MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0 + MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0 + MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0 + MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0 + MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0 + MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0 + MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0 + MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0 + MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0 + MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0 + MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0 + MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0 + MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0 + MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0 + MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0 + MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0 + MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0 + MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0 + MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0 + MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0 + MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0 + MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0 + MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0 + MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0 + MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0 + MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059 + >; + }; + + pinctrl_pwm1: pwmgrp { + fsl,pins = < + MX6SL_PAD_PWM1__PWM1_OUT 0x110b0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 @@ -488,6 +542,44 @@ status = "okay"; }; +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + lcd-supply = <®_lcd_3v3>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + &ssi2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index c75800ca8b35..dfd83e6d8087 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -226,11 +226,14 @@ }; ssi1: ssi@02028000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_SSI1>; + clocks = <&clks IMX6SL_CLK_SSI1_IPG>, + <&clks IMX6SL_CLK_SSI1>; + clock-names = "ipg", "baud"; dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; dma-names = "rx", "tx"; @@ -239,11 +242,14 @@ }; ssi2: ssi@0202c000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_SSI2>; + clocks = <&clks IMX6SL_CLK_SSI2_IPG>, + <&clks IMX6SL_CLK_SSI2>; + clock-names = "ipg", "baud"; dmas = <&sdma 41 1 0>, <&sdma 42 1 0>; dma-names = "rx", "tx"; @@ -252,11 +258,14 @@ }; ssi3: ssi@02030000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_SSI3>; + clocks = <&clks IMX6SL_CLK_SSI3_IPG>, + <&clks IMX6SL_CLK_SSI3>; + clock-names = "ipg", "baud"; dmas = <&sdma 45 1 0>, <&sdma 46 1 0>; dma-names = "rx", "tx"; @@ -529,6 +538,14 @@ }; }; + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + fsl,tempmon-data = <&ocotp>; + clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; + }; + usbphy1: usbphy@020c9000 { compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; @@ -627,8 +644,14 @@ }; lcdif: lcdif@020f8000 { + compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif"; reg = <0x020f8000 0x4000>; interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_LCDIF_PIX>, + <&clks IMX6SL_CLK_LCDIF_AXI>, + <&clks IMX6SL_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; }; dcp: dcp@020fc000 { @@ -784,7 +807,7 @@ }; ocotp: ocotp@021bc000 { - compatible = "fsl,imx6sl-ocotp"; + compatible = "fsl,imx6sl-ocotp", "syscon"; reg = <0x021bc000 0x4000>; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index a3980d970590..82d6b34527b7 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -24,6 +24,13 @@ reg = <0x80000000 0x40000000>; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -90,6 +97,14 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + reg_lcd_3v3: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-3v3"; + gpio = <&gpio3 27 0>; + enable-active-high; + }; }; sound { @@ -251,6 +266,44 @@ }; }; +&lcdif1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + lcd-supply = <®_lcd_3v3>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + &ssi2 { status = "okay"; }; @@ -365,6 +418,46 @@ >; }; + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 + MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 + MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 + MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 + MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 + MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 + MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 + MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 + MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 + MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 + MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 + MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 + MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 + MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 + MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 + MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 + MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 + MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 + MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 + MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 + MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 + MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 + MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 + MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 + MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 + MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 + MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp-1 { + fsl,pins = < + MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0 + >; + }; + pinctrl_vcc_sd3: vccsd3grp { fsl,pins = < MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index f4b9da65bc0f..888dd767a0b3 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -298,6 +298,7 @@ }; ssi1: ssi@02028000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; @@ -311,6 +312,7 @@ }; ssi2: ssi@0202c000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; @@ -324,6 +326,7 @@ }; ssi3: ssi@02030000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; @@ -418,7 +421,7 @@ reg = <0x02098000 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_GPT_BUS>, - <&clks IMX6SX_CLK_GPT_SERIAL>; + <&clks IMX6SX_CLK_GPT_3M>; clock-names = "ipg", "per"; }; @@ -1062,6 +1065,7 @@ }; lcdif1: lcdif@02220000 { + compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; reg = <0x02220000 0x4000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, @@ -1072,6 +1076,7 @@ }; lcdif2: lcdif@02224000 { + compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; reg = <0x02224000 0x4000>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>, diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi index 03d01909525b..c358b4b9a073 100644 --- a/arch/arm/boot/dts/k2e.dtsi +++ b/arch/arm/boot/dts/k2e.dtsi @@ -67,6 +67,8 @@ clock-names = "usb"; interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>; ranges; + dma-coherent; + dma-ranges; status = "disabled"; dwc3@25010000 { @@ -76,5 +78,16 @@ usb-phy = <&usb1_phy>, <&usb1_phy>; }; }; + + dspgpio0: keystone_dsp_gpio@02620240 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x240>; + }; }; }; + +&mdio { + reg = <0x24200f00 0x100>; +}; diff --git a/arch/arm/boot/dts/k2hk.dtsi b/arch/arm/boot/dts/k2hk.dtsi index c73899c73118..d721f4b737f7 100644 --- a/arch/arm/boot/dts/k2hk.dtsi +++ b/arch/arm/boot/dts/k2hk.dtsi @@ -42,5 +42,61 @@ soc { /include/ "k2hk-clocks.dtsi" + + dspgpio0: keystone_dsp_gpio@02620240 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x240>; + }; + + dspgpio1: keystone_dsp_gpio@2620244 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x244>; + }; + + dspgpio2: keystone_dsp_gpio@2620248 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x248>; + }; + + dspgpio3: keystone_dsp_gpio@262024c { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x24c>; + }; + + dspgpio4: keystone_dsp_gpio@2620250 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x250>; + }; + + dspgpio5: keystone_dsp_gpio@2620254 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x254>; + }; + + dspgpio6: keystone_dsp_gpio@2620258 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x258>; + }; + + dspgpio7: keystone_dsp_gpio@262025c { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x25c>; + }; }; }; diff --git a/arch/arm/boot/dts/k2l.dtsi b/arch/arm/boot/dts/k2l.dtsi index 1f7f479589e1..e32c3baa77b8 100644 --- a/arch/arm/boot/dts/k2l.dtsi +++ b/arch/arm/boot/dts/k2l.dtsi @@ -51,5 +51,51 @@ clocks = <&clkuart3>; interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>; }; + + dspgpio0: keystone_dsp_gpio@02620240 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x240>; + }; + + dspgpio1: keystone_dsp_gpio@2620244 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x244>; + }; + + dspgpio2: keystone_dsp_gpio@2620248 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x248>; + }; + + dspgpio3: keystone_dsp_gpio@262024c { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x24c>; + }; }; }; + +&spi0 { + ti,davinci-spi-num-cs = <5>; +}; + +&spi1 { + ti,davinci-spi-num-cs = <3>; +}; + +&spi2 { + ti,davinci-spi-num-cs = <5>; + /* Pin muxed. Enabled and configured by Bootloader */ + status = "disabled"; +}; + +&mdio { + reg = <0x26200f00 0x100>; +}; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 9e31fe7d31f8..5d3e83fa2242 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -172,7 +172,7 @@ compatible = "ti,keystone-usbphy"; #address-cells = <1>; #size-cells = <1>; - reg = <0x2620738 32>; + reg = <0x2620738 24>; status = "disabled"; }; @@ -277,5 +277,13 @@ clock-names = "fck"; bus_freq = <2500000>; }; + + kirq0: keystone_irq@26202a0 { + compatible = "ti,keystone-irq"; + interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <1>; + ti,syscon-dev = <&devctrl 0x2a0>; + }; }; }; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi new file mode 100644 index 000000000000..e6539ea5a711 --- /dev/null +++ b/arch/arm/boot/dts/meson.dtsi @@ -0,0 +1,110 @@ +/* + * Copyright 2014 Carlo Caione <carlo@caione.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + gic: interrupt-controller@c4301000 { + compatible = "arm,cortex-a9-gic"; + reg = <0xc4301000 0x1000>, + <0xc4300100 0x0100>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + timer@c1109940 { + compatible = "amlogic,meson6-timer"; + reg = <0xc1109940 0x14>; + interrupts = <0 10 1>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + wdt: watchdog@c1109900 { + compatible = "amlogic,meson6-wdt"; + reg = <0xc1109900 0x8>; + }; + + uart_AO: serial@c81004c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81004c0 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + + uart_A: serial@c81084c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81084c0 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + + uart_B: serial@c81084dc { + compatible = "amlogic,meson-uart"; + reg = <0xc81084dc 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + + uart_C: serial@c8108700 { + compatible = "amlogic,meson-uart"; + reg = <0xc8108700 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + }; +}; /* end of / */ diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts new file mode 100644 index 000000000000..dc2541faf1ec --- /dev/null +++ b/arch/arm/boot/dts/meson6-atv1200.dts @@ -0,0 +1,66 @@ +/* + * Copyright 2014 Carlo Caione <carlo@caione.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "meson6.dtsi" + +/ { + model = "Geniatech ATV1200"; + compatible = "geniatech,atv1200"; + + aliases { + serial0 = &uart_AO; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; +}; + +&uart_AO { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi new file mode 100644 index 000000000000..4ba49127779f --- /dev/null +++ b/arch/arm/boot/dts/meson6.dtsi @@ -0,0 +1,78 @@ +/* + * Copyright 2014 Carlo Caione <carlo@caione.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "meson.dtsi" + +/ { + model = "Amlogic Meson6 SoC"; + compatible = "amlogic,meson6"; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x200>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x201>; + }; + }; + + clk81: clk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; +}; /* end of / */ diff --git a/arch/arm/boot/dts/mt6589-aquaris5.dts b/arch/arm/boot/dts/mt6589-aquaris5.dts index 443b4467de15..0da047013120 100644 --- a/arch/arm/boot/dts/mt6589-aquaris5.dts +++ b/arch/arm/boot/dts/mt6589-aquaris5.dts @@ -18,6 +18,11 @@ / { model = "bq Aquaris5"; + compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589"; + + chosen { + bootargs = "earlyprintk"; + }; memory { reg = <0x80000000 0x40000000>; diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi index d0297a051549..e3c7600ddb38 100644 --- a/arch/arm/boot/dts/mt6589.dtsi +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -81,8 +81,8 @@ clock-names = "system-clk", "rtc-clk"; }; - gic: interrupt-controller@10212000 { - compatible = "arm,cortex-a15-gic"; + gic: interrupt-controller@10211000 { + compatible = "arm,cortex-a7-gic"; interrupt-controller; #interrupt-cells = <3>; reg = <0x10211000 0x1000>, diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index 9be3c1266378..ae89aad01595 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -159,6 +159,14 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <6>; + mbox_dsp: dsp { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_iva: iva { + ti,mbox-tx = <2 1 3>; + ti,mbox-rx = <3 1 3>; + }; }; timer1: timer@48028000 { diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 1a00f15d9096..b56d71611026 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -249,6 +249,10 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <6>; + mbox_dsp: dsp { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; }; timer1: timer@49018000 { diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 1becefce821b..06a8aec4e6ea 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -174,8 +174,8 @@ uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ + 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ >; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dtsi index 021311f7964b..fd34f913ace3 100644 --- a/arch/arm/boot/dts/omap3-gta04.dts +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -26,6 +26,10 @@ reg = <0x80000000 0x20000000>; /* 512 MB */ }; + aliases { + display0 = &lcd; + }; + gpio-keys { compatible = "gpio-keys"; @@ -74,9 +78,30 @@ }; }; }; + + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + }; }; &omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusb2_pins + >; + + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; + uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ @@ -141,12 +166,31 @@ 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ >; }; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusb2_2_pins + >; + + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; spi_gpio_pins: spi_gpio_pinmux { - pinctrl-single,pins = <0x5a8 (PIN_OUTPUT | MUX_MODE4) /* clk */ - 0x5b6 (PIN_OUTPUT | MUX_MODE4) /* cs */ - 0x5b8 (PIN_OUTPUT | MUX_MODE4) /* tx */ - 0x5b4 (PIN_INPUT | MUX_MODE4) /* rx */ + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */ + OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */ + OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */ + OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */ >; }; }; @@ -196,6 +240,9 @@ #size-cells = <0>; reg = <0x45>; + gpio-controller; + #gpio-cells = <2>; + gta04_led0: red_aux@0 { label = "gta04:red:aux"; reg = <0x0>; @@ -216,11 +263,16 @@ label = "gta04:green:power"; reg = <0x4>; }; + + wifi_reset: wifi_reset@6 { + reg = <0x6>; + compatible = "gpio"; + }; }; /* compass aka magnetometer */ hmc5843@1e { - compatible = "honeywell,hmc5843"; + compatible = "honeywell,hmc5883l"; reg = <0x1e>; }; @@ -248,6 +300,14 @@ power = <50>; }; +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; @@ -286,11 +346,37 @@ bb_uamp = <150>; }; +/* spare */ +&vaux1 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; +}; + +/* sensors */ +&vaux2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; +}; + +/* camera */ +&vaux3 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; +}; + +/* WLAN/BT */ &vaux4 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3150000>; }; +/* GPS LNA */ +&vsim { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3150000>; +}; + /* Needed to power the DPI pins */ &vpll2 { regulator-always-on; @@ -309,3 +395,57 @@ }; }; }; + +&gpmc { + ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */ + + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <16>; + ti,nand-ecc-opt = "bch8"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,device-width = <2>; + + #address-cells = <1>; + #size-cells = <1>; + + x-loader@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "U-Boot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "U-Boot Env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "Kernel"; + reg = <0x280000 0x400000>; + }; + + filesystem@680000 { + label = "File System"; + reg = <0x680000 0xf980000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-gta04a3.dts b/arch/arm/boot/dts/omap3-gta04a3.dts new file mode 100644 index 000000000000..3099a892cf50 --- /dev/null +++ b/arch/arm/boot/dts/omap3-gta04a3.dts @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-gta04.dtsi" + +/ { + model = "Goldelico GTA04A3"; +}; + +&i2c2 { + + /* alternate accelerometer that might be installed on some GTA04A3 boards */ + lis302@1d { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x1d>; + interrupt-parent = <&gpio3>; + interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; + Vdd-supply = <&vaux2>; + Vdd_IO-supply = <&vaux2>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <8>; + st,click-thresh-y = <8>; + st,click-thresh-z = <10>; + st,click-click-time-limit = <9>; + st,click-latency = <50>; + st,irq1-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <32>; + st,min-limit-y = <3>; + st,min-limit-z = <3>; + st,max-limit-x = <3>; + st,max-limit-y = <32>; + st,max-limit-z = <32>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-gta04a4.dts b/arch/arm/boot/dts/omap3-gta04a4.dts new file mode 100644 index 000000000000..c918bb1f0529 --- /dev/null +++ b/arch/arm/boot/dts/omap3-gta04a4.dts @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2014 Marek Belisko <marek@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-gta04.dtsi" + +/ { + model = "Goldelico GTA04A4"; +}; diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts new file mode 100644 index 000000000000..52b386f6865b --- /dev/null +++ b/arch/arm/boot/dts/omap3-gta04a5.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-gta04.dtsi" + +/ { + model = "Goldelico GTA04A5"; + + sound { + ti,jack-det-gpio = <&twl_gpio 2 0>; /* GTA04A5 only */ + }; +}; diff --git a/arch/arm/boot/dts/omap3-ha-common.dtsi b/arch/arm/boot/dts/omap3-ha-common.dtsi new file mode 100644 index 000000000000..bd66545ef954 --- /dev/null +++ b/arch/arm/boot/dts/omap3-ha-common.dtsi @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-tao3530.dtsi" + +/ { + gpio_poweroff { + pinctrl-names = "default"; + pinctrl-0 = <&poweroff_pins>; + + compatible = "gpio-poweroff"; + gpios = <&gpio6 8 GPIO_ACTIVE_LOW>; /* GPIO 168 */ + }; +}; + +&omap3_pmx_core { + sound2_pins: pinmux_sound2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x209e, PIN_OUTPUT | MUX_MODE4) /* gpmc_d8 gpio_44 */ + >; + }; + + led_blue_pins: pinmux_led_blue_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE4) /* cam_xclka gpio_96, LED blue */ + >; + }; + + led_green_pins: pinmux_led_green_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2126, PIN_OUTPUT | MUX_MODE4) /* cam_d8 gpio_107, LED green */ + >; + }; + + led_red_pins: pinmux_led_red_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT_PULLUP | MUX_MODE4) /* cam_xclkb gpio_111, LED red */ + >; + }; + + poweroff_pins: pinmux_poweroff_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT_PULLUP | MUX_MODE4) /* i2c2_scl gpio_168 */ + >; + }; + + powerdown_input_pins: pinmux_powerdown_input_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE4) /* i2c2_sda gpio_183 */ + >; + }; + + fpga_boot0_pins: fpga_boot0_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* cam_d2 gpio_101 */ + OMAP3_CORE1_IOPAD(0x211c, PIN_OUTPUT | MUX_MODE4) /* cam_d3 gpio_102 */ + OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE4) /* cam_d4 gpio_103 */ + OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d5 gpio_104 */ + >; + }; + + fpga_boot1_pins: fpga_boot1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE4) /* gpmc_d10 gpio_46 */ + OMAP3_CORE1_IOPAD(0x20a4, PIN_OUTPUT | MUX_MODE4) /* gpmc_d11 gpio_47 */ + OMAP3_CORE1_IOPAD(0x20a6, PIN_OUTPUT | MUX_MODE4) /* gpmc_d12 gpio_48 */ + OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_d13 gpio_49 */ + >; + }; +}; + +/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */ +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts new file mode 100644 index 000000000000..11aa28d73f3a --- /dev/null +++ b/arch/arm/boot/dts/omap3-ha-lcd.dts @@ -0,0 +1,165 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-ha-common.dtsi" + +/ { + model = "TI OMAP3 HEAD acoustics LCD-baseboard with TAO3530 SOM"; + compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb2_pins + &powerdown_input_pins + &fpga_boot0_pins + &fpga_boot1_pins + &led_blue_pins + &led_green_pins + &led_red_pins + &touchscreen_wake_pins + >; + + touchscreen_irq_pins: pinmux_touchscreen_irq_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio_136, Touchscreen IRQ */ + >; + }; + + touchscreen_wake_pins: pinmux_touchscreen_wake_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x212c, PIN_OUTPUT_PULLUP | MUX_MODE4) /* gpio_110, Touchscreen Wake */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + lte430_pins: pinmux_lte430_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */ + >; + }; +}; + +/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */ +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + lcd0: display@0 { + compatible = "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <<e430_pins>; + enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 */ + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + panel-timing { + clock-frequency = <31250000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <86>; + hsync-len = <1>; + vback-porch = <30>; + vfront-porch = <13>; + vsync-len = <3>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + + backlight { + compatible = "gpio-backlight"; + + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 */ + + default-on; + }; +}; diff --git a/arch/arm/boot/dts/omap3-ha.dts b/arch/arm/boot/dts/omap3-ha.dts new file mode 100644 index 000000000000..fde325688fb9 --- /dev/null +++ b/arch/arm/boot/dts/omap3-ha.dts @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-ha-common.dtsi" + +/ { + model = "TI OMAP3 HEAD acoustics baseboard with TAO3530 SOM"; + compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb2_pins + &powerdown_input_pins + &fpga_boot0_pins + &fpga_boot1_pins + &led_blue_pins + &led_green_pins + &led_red_pins + >; +}; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index af272c156e21..72dca0b7904d 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -159,6 +159,11 @@ reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + + twl_power: power { + compatible = "ti,twl4030-power-idle"; + ti,use_poweroff; + }; }; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 4361777a08d8..9b0494a8ab45 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -134,24 +134,32 @@ >; }; + ethernet_pins: pinmux_ethernet_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpmc_ncs3.gpio_54 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4) /* dss_data16.gpio_86 */ + OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */ + >; + }; + i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0x18a (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl */ + 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - 0x18e (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ - 0x190 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */ >; }; i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0x192 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ - 0x194 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */ >; }; @@ -578,6 +586,8 @@ &gpmc { ranges = <0 0 0x04000000 0x10000000>; /* 256MB */ + ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */ + <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */ /* gpio-irq for dma: 65 */ @@ -646,6 +656,38 @@ reg = <0x004c0000 0x0fb40000>; }; }; + + ethernet@gpmc { + compatible = "smsc,lan91c94"; + interrupt-parent = <&gpio2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ + reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */ + bank-width = <2>; + pinctrl-names = "default"; + pinctrl-0 = <ðernet_pins>; + gpmc,device-width = <2>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <48>; + gpmc,cs-wr-off-ns = <24>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <0>; + gpmc,adv-wr-off-ns = <0>; + gpmc,we-on-ns = <12>; + gpmc,we-off-ns = <18>; + gpmc,oe-on-ns = <12>; + gpmc,oe-off-ns = <48>; + gpmc,page-burst-access-ns = <0>; + gpmc,access-ns = <42>; + gpmc,rd-cycle-ns = <180>; + gpmc,wr-cycle-ns = <180>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-access-ns = <0>; + gpmc,wr-data-mux-bus-ns = <12>; + }; }; &mcspi1 { diff --git a/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi b/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi index 5831bcc52966..520453d95704 100644 --- a/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi @@ -36,8 +36,8 @@ uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; }; @@ -88,6 +88,7 @@ }; &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi new file mode 100644 index 000000000000..b30f387d3a83 --- /dev/null +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -0,0 +1,337 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap34xx-hs.dtsi" + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + /* HS USB Port 2 Power */ + hsusb2_power: hsusb2_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + startup-delay-us = <70000>; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* gpio_162 */ + vcc-supply = <&hsusb2_power>; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + /* McBSP2 is used for onboard sound, same as on beagle */ + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; + + /* Regulator to enable/switch the vcc of the Wifi module */ + mmc2_sdio_poweron: regulator-mmc2-sdio-poweron { + compatible = "regulator-fixed"; + regulator-name = "regulator-mmc2-sdio-poweron"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + gpio = <&gpio5 29 GPIO_ACTIVE_LOW>; /* gpio_157 */ + enable-active-low; + startup-delay-us = <10000>; + }; +}; + +&omap3_pmx_core { + hsusbb2_pins: pinmux_hsusbb2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3_CORE1_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3_CORE1_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3_CORE1_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3_CORE1_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3_CORE1_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ + OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ + OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ + OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + >; + }; + + /* wlan GPIO output for WLAN_EN */ + wlan_gpio: pinmux_wlan_gpio { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr gpio_157 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl.i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.i2c3_sda */ + >; + }; + + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + + mcspi3_pins: pinmux_mcspi3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x25dc, PIN_OUTPUT | MUX_MODE1) /* etk_d0.mcspi3_simo gpio14 INPUT | MODE1 */ + OMAP3_CORE1_IOPAD(0x25de, PIN_INPUT_PULLUP | MUX_MODE1) /* etk_d1.mcspi3_somi gpio15 INPUT | MODE1 */ + OMAP3_CORE1_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE1) /* etk_d2.mcspi3_cs0 gpio16 INPUT | MODE1 */ + OMAP3_CORE1_IOPAD(0x25e2, PIN_INPUT | MUX_MODE1) /* etk_d3.mcspi3_clk gpio17 INPUT | MODE1 */ + >; + }; + + mcbsp3_pins: pinmux_mcbsp3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.uart2_cts */ + OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dr.uart2_rts */ + OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clk.uart2_tx */ + OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_fsx.uart2_rx */ + >; + }; +}; + +/* McBSP1: mux'ed with GPIO158 as clock for HA-DSP */ +&mcbsp1 { + status = "disabled"; +}; + +&mcbsp2 { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + + spidev@0 { + compatible = "spidev"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-cpha; + }; +}; + +&mcspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi3_pins>; + + spidev@0 { + compatible = "spidev"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-cpha; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + cd-gpios = <&twl_gpio 0 0>; + bus-width = <8>; +}; + +// WiFi (Marvell 88W8686) on MMC2/SDIO +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&mmc2_sdio_poweron>; + non-removable; + bus-width = <4>; + cap-power-off-card; +}; + +&mmc3 { + status = "disabled"; +}; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + +&twl_gpio { + ti,use-leds; + /* pullups: BIT(1) */ + ti,pullups = <0x000002>; + /* + * pulldowns: + * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <0x03a1c4>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&mcbsp3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp3_pins>; +}; + +&gpmc { + ranges = <0 0 0x00000000 0x01000000>; + + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <16>; + gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */ + ti,nand-ecc-opt = "sw"; + + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <36>; + gpmc,cs-wr-off-ns = <36>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <24>; + gpmc,adv-wr-off-ns = <36>; + gpmc,oe-on-ns = <6>; + gpmc,oe-off-ns = <48>; + gpmc,we-on-ns = <6>; + gpmc,we-off-ns = <30>; + gpmc,rd-cycle-ns = <72>; + gpmc,wr-cycle-ns = <72>; + gpmc,access-ns = <54>; + gpmc,wr-access-ns = <30>; + + #address-cells = <1>; + #size-cells = <1>; + + x-loader@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "U-Boot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "U-Boot Env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "Kernel"; + reg = <0x280000 0x400000>; + }; + + filesystem@680000 { + label = "File System"; + reg = <0x680000 0xf980000>; + }; + }; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +&vaux2 { + regulator-name = "vdd_ehci"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts new file mode 100644 index 000000000000..d659515ab9b8 --- /dev/null +++ b/arch/arm/boot/dts/omap3-thunder.dts @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-tao3530.dtsi" + +/ { + model = "TI OMAP3 Thunder baseboard with TAO3530 SOM"; + compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; +}; + +&omap3_pmx_core { + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + lte430_pins: pinmux_lte430_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */ + >; + }; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + lcd0: display@0 { + compatible = "samsung,lte430wq-f0c", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <<e430_pins>; + enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 */ + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <2>; + hsync-len = <42>; + vback-porch = <2>; + vfront-porch = <3>; + vsync-len = <11>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + + backlight { + compatible = "gpio-backlight"; + + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 */ + + default-on; + }; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 3136ed1a04ba..226f3631c230 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -335,6 +335,10 @@ interrupts = <26>; ti,mbox-num-users = <2>; ti,mbox-num-fifos = <2>; + mbox_dsp: dsp { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; }; mcspi1: spi@48098000 { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 8a944974d72e..878c979203d0 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -663,6 +663,14 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <3>; ti,mbox-num-fifos = <8>; + mbox_ipu: mbox_ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; }; timer1: timer@4a318000 { diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 429471aa7a1f..b54b271e153b 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -16,6 +16,12 @@ reg = <0x80000000 0x7F000000>; /* 2048 MB */ }; + aliases { + display0 = &hdmi0; + display1 = &dvi0; + display2 = &lcd0; + }; + vmmcsd_fixed: fixed-regulator-mmcsd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -45,6 +51,13 @@ enable-active-high; }; + ads7846reg: ads7846-reg { + compatible = "regulator-fixed"; + regulator-name = "ads7846-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + /* HS USB Host PHY on PORT 2 */ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; @@ -66,6 +79,105 @@ default-state = "off"; }; }; + + lcd0: display { + compatible = "startek,startek-kd050c", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <33000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <43>; + vback-porch = <29>; + vfront-porch = <13>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_lcd_out>; + }; + }; + }; + + hdmi0: connector@0 { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_conn_pins>; + + hpd-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */ + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + + tfp410: encoder@0 { + compatible = "ti,tfp410"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint@0 { + remote-endpoint = <&dpi_dvi_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint@0 { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + + dvi0: connector@1 { + compatible = "dvi-connector"; + label = "dvi"; + + digital; + + ddc-i2c-bus = <&i2c2>; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; +}; + +&omap5_pmx_wkup { + + ads7846_pins: pinmux_ads7846_pins { + pinctrl-single,pins = < + 0x02 (PIN_INPUT_PULLDOWN | MUX_MODE6) /* llib_wakereqin.gpio1_wk15 */ + >; + }; }; &omap5_pmx_core { @@ -88,6 +200,13 @@ >; }; + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x01b8, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + OMAP5_IOPAD(0x01ba, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + >; + }; + mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */ @@ -127,8 +246,8 @@ wlan_gpios_pins: pinmux_wlan_gpios_pins { pinctrl-single,pins = < - OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_109 */ - OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_110 */ + OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_ul_data.gpio4_109 */ + OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_dl_data.gpio4_110 */ >; }; @@ -144,6 +263,104 @@ OMAP5_IOPAD(0x00b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */ >; }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x013c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec */ + OMAP5_IOPAD(0x0140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl */ + OMAP5_IOPAD(0x0142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda */ + >; + }; + + lcd_pins: pinmux_lcd_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0172, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* timer11_pwm_evt.gpio8_227 */ + >; + }; + + hdmi_conn_pins: pinmux_hdmi_conn_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x013e, PIN_INPUT | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0104, PIN_OUTPUT | MUX_MODE3) /* rfbi_data15.dispc_data15 */ + OMAP5_IOPAD(0x0106, PIN_OUTPUT | MUX_MODE3) /* rfbi_data14.dispc_data14 */ + OMAP5_IOPAD(0x0108, PIN_OUTPUT | MUX_MODE3) /* rfbi_data13.dispc_data13 */ + OMAP5_IOPAD(0x010a, PIN_OUTPUT | MUX_MODE3) /* rfbi_data12.dispc_data12 */ + OMAP5_IOPAD(0x010c, PIN_OUTPUT | MUX_MODE3) /* rfbi_data11.dispc_data11 */ + OMAP5_IOPAD(0x010e, PIN_OUTPUT | MUX_MODE3) /* rfbi_data10.dispc_data10 */ + OMAP5_IOPAD(0x0110, PIN_OUTPUT | MUX_MODE3) /* rfbi_data9.dispc_data9 */ + OMAP5_IOPAD(0x0112, PIN_OUTPUT | MUX_MODE3) /* rfbi_data8.dispc_data8 */ + OMAP5_IOPAD(0x0114, PIN_OUTPUT | MUX_MODE3) /* rfbi_data7.dispc_data7 */ + OMAP5_IOPAD(0x0116, PIN_OUTPUT | MUX_MODE3) /* rfbi_data6.dispc_data6 */ + OMAP5_IOPAD(0x0118, PIN_OUTPUT | MUX_MODE3) /* rfbi_data5.dispc_data5 */ + OMAP5_IOPAD(0x011a, PIN_OUTPUT | MUX_MODE3) /* rfbi_data4.dispc_data4 */ + OMAP5_IOPAD(0x011c, PIN_OUTPUT | MUX_MODE3) /* rfbi_data3.dispc_data3 */ + OMAP5_IOPAD(0x011e, PIN_OUTPUT | MUX_MODE3) /* rfbi_data2.dispc_data2 */ + OMAP5_IOPAD(0x0120, PIN_OUTPUT | MUX_MODE3) /* rfbi_data1.dispc_data1 */ + OMAP5_IOPAD(0x0122, PIN_OUTPUT | MUX_MODE3) /* rfbi_data0.dispc_data0 */ + OMAP5_IOPAD(0x0124, PIN_OUTPUT | MUX_MODE3) /* rfbi_we.dispc_vsync */ + OMAP5_IOPAD(0x0126, PIN_OUTPUT | MUX_MODE3) /* rfbi_cs0.dispc_hsync */ + OMAP5_IOPAD(0x0128, PIN_OUTPUT | MUX_MODE3) /* rfbi_a0.dispc_de */ + OMAP5_IOPAD(0x012a, PIN_OUTPUT | MUX_MODE3) /* rfbi_re.dispc_pclk */ + OMAP5_IOPAD(0x012c, PIN_OUTPUT | MUX_MODE3) /* rfbi_hsync0.dispc_data17 */ + OMAP5_IOPAD(0x012e, PIN_OUTPUT | MUX_MODE3) /* rfbi_te_vsync0.dispc_data16 */ + OMAP5_IOPAD(0x0130, PIN_OUTPUT | MUX_MODE3) /* gpio6_182.dispc_data18 */ + OMAP5_IOPAD(0x0132, PIN_OUTPUT | MUX_MODE3) /* gpio6_183.dispc_data19 */ + OMAP5_IOPAD(0x0134, PIN_OUTPUT | MUX_MODE3) /* gpio6_184.dispc_data20 */ + OMAP5_IOPAD(0x0136, PIN_OUTPUT | MUX_MODE3) /* gpio6_185.dispc_data21 */ + OMAP5_IOPAD(0x0138, PIN_OUTPUT | MUX_MODE3) /* gpio6_186.dispc_data22 */ + OMAP5_IOPAD(0x013a, PIN_OUTPUT | MUX_MODE3) /* gpio6_187.dispc_data23 */ + >; + }; + + mcspi2_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x00fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ + OMAP5_IOPAD(0x00fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ + OMAP5_IOPAD(0x0100, PIN_INPUT | MUX_MODE0) /* mcspi2_somi */ + OMAP5_IOPAD(0x0102, PIN_INPUT | MUX_MODE0) /* mcspi2_cs0 */ + >; + }; +}; + +&mcspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi2_pins>; + + /* touch controller */ + ads7846@0 { + pinctrl-names = "default"; + pinctrl-0 = <&ads7846_pins>; + + compatible = "ti,ads7846"; + vcc-supply = <&ads7846reg>; + + reg = <0>; /* CS0 */ + spi-max-frequency = <1500000>; + + interrupt-parent = <&gpio1>; + interrupts = <15 0>; /* gpio1_wk15 */ + pendown-gpio = <&gpio1 15 0>; + + + ti,x-min = /bits/ 16 <0x0>; + ti,x-max = /bits/ 16 <0x0fff>; + ti,y-min = /bits/ 16 <0x0>; + ti,y-max = /bits/ 16 <0x0fff>; + + ti,x-plate-ohms = /bits/ 16 <180>; + ti,pressure-max = /bits/ 16 <255>; + + ti,debounce-max = /bits/ 16 <30>; + ti,debounce-tol = /bits/ 16 <10>; + ti,debounce-rep = /bits/ 16 <1>; + + linux,wakeup; + }; }; &mmc1 { @@ -398,6 +615,13 @@ }; }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <100000>; +}; + &usbhshost { port2-mode = "ehci-hsic"; port3-mode = "ehci-hsic"; @@ -407,6 +631,50 @@ phys = <0 &hsusb2_phy &hsusb3_phy>; }; +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; +}; + &cpu0 { cpu0-supply = <&smps123_reg>; }; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_dvi_out: endpoint@0 { + remote-endpoint = <&tfp410_in>; + data-lines = <24>; + }; + + dpi_lcd_out: endpoint@1 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +&dsi2 { + status = "ok"; + vdd-supply = <&ldo4_reg>; +}; + +&hdmi { + status = "ok"; + vdda-supply = <&ldo4_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + lanes = <1 0 3 2 5 4 7 6>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap5-sbc-t54.dts b/arch/arm/boot/dts/omap5-sbc-t54.dts index aa98fea3f2b3..337bbbc01a35 100644 --- a/arch/arm/boot/dts/omap5-sbc-t54.dts +++ b/arch/arm/boot/dts/omap5-sbc-t54.dts @@ -1,11 +1,11 @@ /* - * Suppport for CompuLab SBC-T54 with CM-T54 + * Suppport for CompuLab CM-T54 on SB-T54 baseboard */ #include "omap5-cm-t54.dts" / { - model = "CompuLab SBC-T54 with CM-T54"; + model = "CompuLab CM-T54 on SB-T54"; compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5"; }; @@ -19,8 +19,8 @@ mmc1_aux_pins: pinmux_mmc1_aux_pins { pinctrl-single,pins = < - OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_228 */ - OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_229 */ + OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* timer5_pwm_evt.gpio8_228 */ + OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* timer6_pwm_evt.gpio8_229 */ >; }; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 4a6091d717b5..256b7f69e45b 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -189,18 +189,22 @@ }; omap5_pmx_core: pinmux@4a002840 { - compatible = "ti,omap4-padconf", "pinctrl-single"; + compatible = "ti,omap5-padconf", "pinctrl-single"; reg = <0x4a002840 0x01b6>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0x7fff>; }; omap5_pmx_wkup: pinmux@4ae0c840 { - compatible = "ti,omap4-padconf", "pinctrl-single"; + compatible = "ti,omap5-padconf", "pinctrl-single"; reg = <0x4ae0c840 0x0038>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0x7fff>; }; @@ -454,7 +458,7 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; @@ -462,7 +466,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; @@ -470,7 +474,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; @@ -478,7 +482,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; @@ -486,7 +490,7 @@ uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart5"; clock-frequency = <48000000>; }; @@ -494,7 +498,7 @@ uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart6"; clock-frequency = <48000000>; }; @@ -649,6 +653,14 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <3>; ti,mbox-num-fifos = <8>; + mbox_ipu: mbox_ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; }; timer1: timer@4ae18000 { @@ -952,6 +964,15 @@ clock-names = "fck"; }; + rfbi: encoder@58002000 { + compatible = "ti,omap5-rfbi"; + reg = <0x58002000 0x100>; + status = "disabled"; + ti,hwmods = "dss_rfbi"; + clocks = <&dss_dss_clk>, <&l3_iclk_div>; + clock-names = "fck", "ick"; + }; + dsi1: encoder@58004000 { compatible = "ti,omap5-dsi"; reg = <0x58004000 0x200>, diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index a5e90f078aa9..c08f84629aa9 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -113,14 +113,14 @@ }; usb0: ohci@4c000000 { - compatible = "mrvl,pxa-ohci"; + compatible = "marvell,pxa-ohci"; reg = <0x4c000000 0x10000>; interrupts = <3>; status = "disabled"; }; mmc0: mmc@41100000 { - compatible = "mrvl,pxa-mmc"; + compatible = "marvell,pxa-mmc"; reg = <0x41100000 0x1000>; interrupts = <23>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 7c2441d526bc..b396c8311b27 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -5,6 +5,33 @@ compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; soc { + pinctrl@800000 { + i2c1_pins: i2c1 { + mux { + pins = "gpio20", "gpio21"; + function = "gsbi1"; + }; + }; + }; + + gsbi@12440000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + + i2c@12460000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + eeprom: eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + }; + }; + }; + gsbi@16600000 { status = "ok"; qcom,mode = <GSBI_PROT_I2C_UART>; @@ -12,5 +39,21 @@ status = "ok"; }; }; + + amba { + /* eMMC */ + sdcc1: sdcc@12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc@12180000 { + status = "okay"; + }; + /* WLAN */ + sdcc4: sdcc@121c0000 { + status = "okay"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 92bf793622c3..b3154c071652 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -2,7 +2,9 @@ #include "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/clock/qcom,mmcc-msm8960.h> #include <dt-bindings/soc/qcom,gsbi.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { model = "Qualcomm APQ8064"; @@ -70,6 +72,34 @@ ranges; compatible = "simple-bus"; + tlmm_pinmux: pinctrl@800000 { + compatible = "qcom,apq8064-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&ps_hold>; + + sdc4_gpios: sdc4-gpios { + pios { + pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; + function = "sdc4"; + }; + }; + + ps_hold: ps_hold { + mux { + pins = "gpio78"; + function = "ps_hold"; + }; + }; + }; + intc: interrupt-controller@2000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -133,6 +163,48 @@ regulator; }; + gsbi1: gsbi@12440000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12440000 0x100>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + i2c1: i2c@12460000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x12460000 0x1000>; + interrupts = <0 194 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi2: gsbi@12480000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12480000 0x100>; + clocks = <&gcc GSBI2_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + i2c2: i2c@124a0000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x124a0000 0x1000>; + interrupts = <0 196 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + gsbi7: gsbi@16600000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; @@ -166,5 +238,116 @@ #clock-cells = <1>; #reset-cells = <1>; }; + + mmcc: clock-controller@4000000 { + compatible = "qcom,mmcc-apq8064"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + sdcc1bam:dma@12402000{ + compatible = "qcom,bam-v1.3.0"; + reg = <0x12402000 0x8000>; + interrupts = <0 98 0>; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc3bam:dma@12182000{ + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x8000>; + interrupts = <0 96 0>; + clocks = <&gcc SDC3_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc4bam:dma@121c2000{ + compatible = "qcom,bam-v1.3.0"; + reg = <0x121c2000 0x8000>; + interrupts = <0 95 0>; + clocks = <&gcc SDC4_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc3: sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc4: sdcc@121c0000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x121c0000 0x2000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + vmmc-supply = <&vsdcc_fixed>; + vqmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc4bam 2>, <&sdcc4bam 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&sdc4_gpios>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index b4dfb01fe6fb..47370494d0f8 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -22,6 +22,13 @@ pinctrl@fd510000 { + i2c11_pins: i2c11 { + mux { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + }; + }; + spi8_default: spi8_default { mosi { pins = "gpio45"; @@ -41,5 +48,19 @@ }; }; }; + + i2c@f9967000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c11_pins>; + pinctrl-names = "default"; + + eeprom: eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + read-only; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts new file mode 100644 index 000000000000..c9ff10821ad9 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts @@ -0,0 +1,23 @@ +#include "qcom-apq8084.dtsi" + +/ { + model = "Qualcomm APQ8084/IFC6540"; + compatible = "qcom,apq8084-ifc6540", "qcom,apq8084"; + + soc { + serial@f995e000 { + status = "okay"; + }; + + sdhci@f9824900 { + bus-width = <8>; + non-removable; + status = "okay"; + }; + + sdhci@f98a4900 { + cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>; + bus-width = <4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts index 9dae3878b71d..8ecec58a9ff6 100644 --- a/arch/arm/boot/dts/qcom-apq8084-mtp.dts +++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts @@ -3,4 +3,10 @@ / { model = "Qualcomm APQ 8084-MTP"; compatible = "qcom,apq8084-mtp", "qcom,apq8084"; + + soc { + serial@f995e000 { + status = "okay"; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index e3e009a5912b..1f130bc16858 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -2,6 +2,9 @@ #include "skeleton.dtsi" +#include <dt-bindings/clock/qcom,gcc-apq8084.h> +#include <dt-bindings/gpio/gpio.h> + / { model = "Qualcomm APQ 8084"; compatible = "qcom,apq8084"; @@ -175,5 +178,53 @@ compatible = "qcom,pshold"; reg = <0xfc4ab000 0x4>; }; + + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-apq8084"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0xfc400000 0x4000>; + }; + + tlmm: pinctrl@fd510000 { + compatible = "qcom,apq8084-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 208 0>; + }; + + serial@f995e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995e000 0x1000>; + interrupts = <0 114 0x0>; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + sdhci@f9824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 123 0>, <0 138 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + sdhci@f98a4900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 125 0>, <0 221 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts new file mode 100644 index 000000000000..95e64955fb8e --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -0,0 +1,85 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +/ { + model = "Qualcomm IPQ8064/AP148"; + compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + soc { + pinmux@800000 { + i2c4_pins: i2c4_pinmux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + bias-disable; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "ok"; + serial@16340000 { + status = "ok"; + }; + + i2c4: i2c@16380000 { + status = "ok"; + + clock-frequency = <200000>; + + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = <GSBI_PROT_SPI>; + status = "ok"; + + spi4: spi@1a280000 { + status = "ok"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 0>; + + flash: m25p80@0 { + compatible = "s25fl256s1"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + partition@0 { + label = "rootfs"; + reg = <0x0 0x1000000>; + }; + + partition@1 { + label = "scratch"; + reg = <0x1000000 0x1000000>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi new file mode 100644 index 000000000000..7093b075e408 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi @@ -0,0 +1 @@ +#include "qcom-ipq8064.dtsi" diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi new file mode 100644 index 000000000000..244f857f0e6f --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -0,0 +1,250 @@ +/dts-v1/; + +#include "skeleton.dtsi" +#include <dt-bindings/clock/qcom,gcc-ipq806x.h> +#include <dt-bindings/soc/qcom,gsbi.h> + +/ { + model = "Qualcomm IPQ8064"; + compatible = "qcom,ipq8064"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + }; + + cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <1 10 0x304>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + nss@40000000 { + reg = <0x40000000 0x1000000>; + no-map; + }; + + smem@41000000 { + reg = <0x41000000 0x200000>; + no-map; + }; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + qcom_pinmux: pinmux@800000 { + compatible = "qcom,ipq8064-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 32 0x4>; + }; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; + + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, + <1 3 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <25000000>, + <32768>; + cpu-offset = <0x80000>; + }; + + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + }; + + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + }; + + saw0: regulator@2089000 { + compatible = "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw1: regulator@2099000 { + compatible = "qcom,saw2"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + gsbi2: gsbi@12480000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12480000 0x100>; + clocks = <&gcc GSBI2_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + serial@12490000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12490000 0x1000>, + <0x12480000 0x1000>; + interrupts = <0 195 0x0>; + clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@124a0000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x124a0000 0x1000>; + interrupts = <0 196 0>; + + clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + }; + + gsbi4: gsbi@16300000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16300000 0x100>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + serial@16340000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16340000 0x1000>, + <0x16300000 0x1000>; + interrupts = <0 152 0x0>; + clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@16380000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16380000 0x1000>; + interrupts = <0 153 0>; + + clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi5: gsbi@1a200000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x1a200000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + serial@1a240000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x1a240000 0x1000>, + <0x1a200000 0x1000>; + interrupts = <0 154 0x0>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@1a280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <0 155 0>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + spi@1a280000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <0 155 0>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x00500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-ipq8064"; + reg = <0x00900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 45180adfadf1..e0883c376248 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -1,3 +1,5 @@ +#include <dt-bindings/input/input.h> + #include "qcom-msm8660.dtsi" / { @@ -12,5 +14,45 @@ status = "ok"; }; }; + + amba { + /* eMMC */ + sdcc1: sdcc@12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc@12180000 { + status = "okay"; + }; + }; + }; +}; + +&pmicintc { + keypad@148 { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_FN_F1) + MATRIX_KEY(0, 1, KEY_UP) + MATRIX_KEY(0, 2, KEY_LEFT) + MATRIX_KEY(0, 3, KEY_VOLUMEUP) + MATRIX_KEY(1, 0, KEY_FN_F2) + MATRIX_KEY(1, 1, KEY_RIGHT) + MATRIX_KEY(1, 2, KEY_DOWN) + MATRIX_KEY(1, 3, KEY_VOLUMEDOWN) + MATRIX_KEY(2, 3, KEY_ENTER) + MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS) + MATRIX_KEY(4, 1, KEY_UP) + MATRIX_KEY(4, 2, KEY_LEFT) + MATRIX_KEY(4, 3, KEY_HOME) + MATRIX_KEY(4, 4, KEY_FN_F3) + MATRIX_KEY(5, 0, KEY_CAMERA) + MATRIX_KEY(5, 1, KEY_RIGHT) + MATRIX_KEY(5, 2, KEY_DOWN) + MATRIX_KEY(5, 3, KEY_BACK) + MATRIX_KEY(5, 4, KEY_MENU) + >; + keypad,num-rows = <6>; + keypad,num-columns = <5>; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 53837aaa2f72..0affd6193f56 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -2,6 +2,7 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8660.h> #include <dt-bindings/soc/qcom,gsbi.h> @@ -103,6 +104,98 @@ compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; + + pmicintc: pmic@0 { + compatible = "qcom,pm8058"; + interrupt-parent = <&msmgpio>; + interrupts = <88 8>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8058-pwrkey"; + reg = <0x1c>; + interrupt-parent = <&pmicintc>; + interrupts = <50 1>, <51 1>; + debounce = <15625>; + pull-up; + }; + + keypad@148 { + compatible = "qcom,pm8058-keypad"; + reg = <0x148>; + interrupt-parent = <&pmicintc>; + interrupts = <74 1>, <75 1>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; + + rtc@11d { + compatible = "qcom,pm8058-rtc"; + interrupt-parent = <&pmicintc>; + interrupts = <39 1>; + reg = <0x11d>; + allow-set-time; + }; + + vibrator@4a { + compatible = "qcom,pm8058-vib"; + reg = <0x4a>; + }; + }; + }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x8000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <48000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + }; + + sdcc3: sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + }; }; }; + }; diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index 8f75cc4c8340..7f70fae90959 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -1,3 +1,5 @@ +#include <dt-bindings/input/input.h> + #include "qcom-msm8960.dtsi" / { @@ -12,5 +14,30 @@ status = "ok"; }; }; + + amba { + /* eMMC */ + sdcc1: sdcc@12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc@12180000 { + status = "okay"; + }; + }; + }; +}; + +&pmicintc { + keypad@148 { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_VOLUMEUP) + MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) + MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) + MATRIX_KEY(0, 3, KEY_CAMERA) + >; + keypad,num-rows = <1>; + keypad,num-columns = <5>; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 5303e53e34dc..e1b0d5cd9e3c 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -2,6 +2,7 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8960.h> #include <dt-bindings/soc/qcom,gsbi.h> @@ -143,6 +144,43 @@ compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; + + pmicintc: pmic@0 { + compatible = "qcom,pm8921"; + interrupt-parent = <&msmgpio>; + interrupts = <104 8>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupt-parent = <&pmicintc>; + interrupts = <50 1>, <51 1>; + debounce = <15625>; + pull-up; + }; + + keypad@148 { + compatible = "qcom,pm8921-keypad"; + reg = <0x148>; + interrupt-parent = <&pmicintc>; + interrupts = <74 1>, <75 1>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; + + rtc@11d { + compatible = "qcom,pm8921-rtc"; + interrupt-parent = <&pmicintc>; + interrupts = <39 1>; + reg = <0x11d>; + allow-set-time; + }; + }; }; rng@1a500000 { @@ -151,5 +189,54 @@ clocks = <&gcc PRNG_CLK>; clock-names = "core"; }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x8000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + }; + + sdcc3: sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 69dca2aca25a..e265ec16a787 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -1,8 +1,8 @@ /dts-v1/; -#include "skeleton.dtsi" - +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> +#include "skeleton.dtsi" / { model = "Qualcomm MSM8974"; @@ -236,5 +236,16 @@ #interrupt-cells = <2>; interrupts = <0 208 0>; }; + + blsp_i2c11: i2c@f9967000 { + status = "disable"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9967000 0x1000>; + interrupts = <0 105 IRQ_TYPE_NONE>; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index d8ec5058c351..ef152e384822 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -51,7 +51,7 @@ }; irqc0: interrupt-controller@e61c0000 { - compatible = "renesas,irqc"; + compatible = "renesas,irqc-r8a73a4", "renesas,irqc"; #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; @@ -90,7 +90,7 @@ }; irqc1: interrupt-controller@e61c0200 { - compatible = "renesas,irqc"; + compatible = "renesas,irqc-r8a73a4", "renesas,irqc"; #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0200 0 0x200>; @@ -165,7 +165,7 @@ }; thermal@e61f0000 { - compatible = "renesas,rcar-thermal"; + compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 72891e5f0f1b..7cfba9aa1b41 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -199,7 +199,6 @@ scif0: serial@ffe40000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe40000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -209,7 +208,6 @@ scif1: serial@ffe41000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe41000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -219,7 +217,6 @@ scif2: serial@ffe42000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe42000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -229,7 +226,6 @@ scif3: serial@ffe43000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe43000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -239,7 +235,6 @@ scif4: serial@ffe44000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe44000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -249,7 +244,6 @@ scif5: serial@ffe45000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe45000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -262,7 +256,7 @@ }; thermal@ffc48000 { - compatible = "renesas,rcar-thermal"; + compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; reg = <0xffc48000 0x38>; }; @@ -446,10 +440,10 @@ /* Gate clocks */ mstp0_clks: clocks@ffc80030 { compatible = "renesas,r8a7779-mstp-clocks", - "renesas,cpg-mstp-clocks"; + "renesas,cpg-mstp-clocks"; reg = <0xffc80030 4>; clocks = <&cpg_clocks R8A7779_CLK_S>, - <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_S>, @@ -483,7 +477,7 @@ }; mstp1_clks: clocks@ffc80034 { compatible = "renesas,r8a7779-mstp-clocks", - "renesas,cpg-mstp-clocks"; + "renesas,cpg-mstp-clocks"; reg = <0xffc80034 4>, <0xffc80044 4>; clocks = <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, @@ -512,7 +506,7 @@ }; mstp3_clks: clocks@ffc8003c { compatible = "renesas,r8a7779-mstp-clocks", - "renesas,cpg-mstp-clocks"; + "renesas,cpg-mstp-clocks"; reg = <0xffc8003c 4>; clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 7853c2c15ce6..69098b906b39 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -32,7 +32,7 @@ reg = <0 0x40000000 0 0x40000000>; }; - memory@180000000 { + memory@140000000 { device_type = "memory"; reg = <1 0x40000000 0 0xc0000000>; }; @@ -234,6 +234,11 @@ renesas,groups = "usb2"; renesas,function = "usb2"; }; + + vin1_pins: vin { + renesas,groups = "vin1_data8", "vin1_clk"; + renesas,function = "vin1"; + }; }; ðer { @@ -370,6 +375,19 @@ status = "ok"; pinctrl-0 = <&iic2_pins>; pinctrl-names = "default"; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin1>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep0>; + }; + }; + }; }; &iic3 { @@ -378,7 +396,7 @@ status = "okay"; vdd_dvfs: regulator@68 { - compatible = "diasemi,da9210"; + compatible = "dlg,da9210"; reg = <0x68>; regulator-min-microvolt = <1000000>; @@ -405,3 +423,21 @@ pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; }; + +/* composite video input */ +&vin1 { + pinctrl-0 = <&vin1_pins>; + pinctrl-names = "default"; + + status = "ok"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin1ep0: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index aa146d2d1022..d0e17733dc1a 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -33,6 +33,10 @@ spi2 = &msiof1; spi3 = &msiof2; spi4 = &msiof3; + vin0 = &vin0; + vin1 = &vin1; + vin2 = &vin2; + vin3 = &vin3; }; cpus { @@ -249,6 +253,65 @@ <0 3 IRQ_TYPE_LEVEL_HIGH>; }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH + 0 200 IRQ_TYPE_LEVEL_HIGH + 0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH + 0 205 IRQ_TYPE_LEVEL_HIGH + 0 206 IRQ_TYPE_LEVEL_HIGH + 0 207 IRQ_TYPE_LEVEL_HIGH + 0 208 IRQ_TYPE_LEVEL_HIGH + 0 209 IRQ_TYPE_LEVEL_HIGH + 0 210 IRQ_TYPE_LEVEL_HIGH + 0 211 IRQ_TYPE_LEVEL_HIGH + 0 212 IRQ_TYPE_LEVEL_HIGH + 0 213 IRQ_TYPE_LEVEL_HIGH + 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH + 0 216 IRQ_TYPE_LEVEL_HIGH + 0 217 IRQ_TYPE_LEVEL_HIGH + 0 218 IRQ_TYPE_LEVEL_HIGH + 0 219 IRQ_TYPE_LEVEL_HIGH + 0 308 IRQ_TYPE_LEVEL_HIGH + 0 309 IRQ_TYPE_LEVEL_HIGH + 0 310 IRQ_TYPE_LEVEL_HIGH + 0 311 IRQ_TYPE_LEVEL_HIGH + 0 312 IRQ_TYPE_LEVEL_HIGH + 0 313 IRQ_TYPE_LEVEL_HIGH + 0 314 IRQ_TYPE_LEVEL_HIGH + 0 315 IRQ_TYPE_LEVEL_HIGH + 0 316 IRQ_TYPE_LEVEL_HIGH + 0 317 IRQ_TYPE_LEVEL_HIGH + 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; @@ -505,6 +568,38 @@ status = "disabled"; }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN0>; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN1>; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN2>; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin3: video@e6ef3000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN3>; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -773,33 +868,36 @@ mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 + R8A7790_CLK_JPU R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S >; clock-output-names = - "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", + "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", "vsp1-du0", "vsp1-rt", "vsp1-sy"; }; mstp2_clks: mstp2_clks@e6150138 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>; + <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&zs_clk>, + <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0 R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1 R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2 + R8A7790_CLK_SYS_DMAC1 R8A7790_CLK_SYS_DMAC0 >; clock-output-names = "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", - "scifb1", "msiof1", "msiof3", "scifb2"; + "scifb1", "msiof1", "msiof3", "scifb2", + "sys-dmac1", "sys-dmac0"; }; mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -916,6 +1014,8 @@ reg = <0 0xe6b10000 0 0x2c>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>; + dma-names = "tx", "rx"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -924,9 +1024,11 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -934,9 +1036,11 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e10000 0 0x0064>; + reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>; interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -944,9 +1048,11 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e00000 0 0x0064>; + reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>; interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -954,9 +1060,11 @@ msiof3: spi@e6c90000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6c90000 0 0x0064>; + reg = <0 0xe6c90000 0 0x0064>, <0 0xe7c90000 0 0x0064>; interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; + dmas = <&dmac0 0x45>, <&dmac0 0x46>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1050,7 +1158,6 @@ rcar_sound: rcar_sound@0xec500000 { #sound-dai-cells = <1>; compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; - interrupt-parent = <&gic>; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index 3a2ef0a2a137..f1b56de10205 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -135,6 +135,11 @@ renesas,groups = "usb1"; renesas,function = "usb1"; }; + + vin0_pins: vin0 { + renesas,groups = "vin0_data8", "vin0_clk"; + renesas,function = "vin0"; + }; }; &scif0 { @@ -191,6 +196,19 @@ status = "okay"; clock-frequency = <400000>; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin0>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin0ep>; + }; + }; + }; }; &qspi { @@ -260,3 +278,20 @@ &pciec { status = "okay"; }; + +/* composite video input */ +&vin0 { + status = "ok"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 740308e09457..07550e775e80 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -284,6 +284,11 @@ renesas,groups = "usb1"; renesas,function = "usb1"; }; + + vin1_pins: vin1 { + renesas,groups = "vin1_data8", "vin1_clk"; + renesas,function = "vin1"; + }; }; ðer { @@ -411,6 +416,19 @@ status = "okay"; clock-frequency = <400000>; + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin1>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep>; + }; + }; + }; + eeprom@50 { compatible = "renesas,24c02"; reg = <0x50>; @@ -423,7 +441,7 @@ clock-frequency = <100000>; vdd_dvfs: regulator@68 { - compatible = "diasemi,da9210"; + compatible = "dlg,da9210"; reg = <0x68>; regulator-min-microvolt = <1000000>; @@ -456,3 +474,20 @@ &cpu0 { cpu0-supply = <&vdd_dvfs>; }; + +/* composite video input */ +&vin1 { + status = "ok"; + pinctrl-0 = <&vin1_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin1ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index e270f38d827f..e06c11fa8698 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -34,6 +34,9 @@ spi1 = &msiof0; spi2 = &msiof1; spi3 = &msiof2; + vin0 = &vin0; + vin1 = &vin1; + vin2 = &vin2; }; cpus { @@ -238,6 +241,66 @@ <0 17 IRQ_TYPE_LEVEL_HIGH>; }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH + 0 200 IRQ_TYPE_LEVEL_HIGH + 0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH + 0 205 IRQ_TYPE_LEVEL_HIGH + 0 206 IRQ_TYPE_LEVEL_HIGH + 0 207 IRQ_TYPE_LEVEL_HIGH + 0 208 IRQ_TYPE_LEVEL_HIGH + 0 209 IRQ_TYPE_LEVEL_HIGH + 0 210 IRQ_TYPE_LEVEL_HIGH + 0 211 IRQ_TYPE_LEVEL_HIGH + 0 212 IRQ_TYPE_LEVEL_HIGH + 0 213 IRQ_TYPE_LEVEL_HIGH + 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH + 0 216 IRQ_TYPE_LEVEL_HIGH + 0 217 IRQ_TYPE_LEVEL_HIGH + 0 218 IRQ_TYPE_LEVEL_HIGH + 0 219 IRQ_TYPE_LEVEL_HIGH + 0 308 IRQ_TYPE_LEVEL_HIGH + 0 309 IRQ_TYPE_LEVEL_HIGH + 0 310 IRQ_TYPE_LEVEL_HIGH + 0 311 IRQ_TYPE_LEVEL_HIGH + 0 312 IRQ_TYPE_LEVEL_HIGH + 0 313 IRQ_TYPE_LEVEL_HIGH + 0 314 IRQ_TYPE_LEVEL_HIGH + 0 315 IRQ_TYPE_LEVEL_HIGH + 0 316 IRQ_TYPE_LEVEL_HIGH + 0 317 IRQ_TYPE_LEVEL_HIGH + 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { #address-cells = <1>; @@ -550,6 +613,30 @@ status = "disabled"; }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7791"; + clocks = <&mstp8_clks R8A7791_CLK_VIN0>; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7791"; + clocks = <&mstp8_clks R8A7791_CLK_VIN1>; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7791"; + clocks = <&mstp8_clks R8A7791_CLK_VIN2>; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -802,16 +889,16 @@ mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 + R8A7791_CLK_JPU R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S >; clock-output-names = - "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", + "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", "vsp1-du0", "vsp1-sy"; }; mstp2_clks: mstp2_clks@e6150138 { @@ -957,6 +1044,8 @@ reg = <0 0xe6b10000 0 0x2c>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>; + dma-names = "tx", "rx"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -965,9 +1054,11 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -975,9 +1066,11 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e10000 0 0x0064>; + reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>; interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -985,9 +1078,11 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e00000 0 0x0064>; + reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>; interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1061,7 +1156,6 @@ rcar_sound: rcar_sound@0xec500000 { #sound-dai-cells = <1>; compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; - interrupt-parent = <&gic>; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts new file mode 100644 index 000000000000..79d06ef017a0 --- /dev/null +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -0,0 +1,47 @@ +/* + * Device Tree Source for the Alt board + * + * Copyright (C) 2014 Renesas Electronics Corporation + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7794.dtsi" + +/ { + model = "Alt"; + compatible = "renesas,alt", "renesas,r8a7794"; + + aliases { + serial0 = &scif2; + }; + + chosen { + bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&cmt0 { + status = "ok"; +}; + +&scif2 { + status = "ok"; +}; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi new file mode 100644 index 000000000000..d4e8bce1e0b7 --- /dev/null +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -0,0 +1,531 @@ +/* + * Device Tree Source for the r8a7794 SoC + * + * Copyright (C) 2014 Renesas Electronics Corporation + * Copyright (C) 2014 Ulrich Hecht + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/clock/r8a7794-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "renesas,r8a7794"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clock-frequency = <1000000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <1>; + clock-frequency = <1000000000>; + }; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + cmt0: timer@ffca0000 { + compatible = "renesas,cmt-48-gen2"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, + <0 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7794_CLK_CMT0>; + clock-names = "fck"; + + renesas,channels-mask = <0x60>; + + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,cmt-48-gen2"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, + <0 121 IRQ_TYPE_LEVEL_HIGH>, + <0 122 IRQ_TYPE_LEVEL_HIGH>, + <0 123 IRQ_TYPE_LEVEL_HIGH>, + <0 124 IRQ_TYPE_LEVEL_HIGH>, + <0 125 IRQ_TYPE_LEVEL_HIGH>, + <0 126 IRQ_TYPE_LEVEL_HIGH>, + <0 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7794_CLK_CMT1>; + clock-names = "fck"; + + renesas,channels-mask = <0xff>; + + status = "disabled"; + }; + + irqc0: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7794", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, + <0 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>, + <0 12 IRQ_TYPE_LEVEL_HIGH>, + <0 13 IRQ_TYPE_LEVEL_HIGH>, + <0 14 IRQ_TYPE_LEVEL_HIGH>, + <0 15 IRQ_TYPE_LEVEL_HIGH>, + <0 16 IRQ_TYPE_LEVEL_HIGH>, + <0 17 IRQ_TYPE_LEVEL_HIGH>; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c40000 0 64>; + interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c50000 0 64>; + interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c60000 0 64>; + interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa3: serial@e6c70000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c70000 0 64>; + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa4: serial@e6c78000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c78000 0 64>; + interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa5: serial@e6c80000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c80000 0 64>; + interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifb0: serial@e6c20000 { + compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + reg = <0 0xe6c20000 0 64>; + interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifb1: serial@e6c30000 { + compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + reg = <0 0xe6c30000 0 64>; + interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifb2: serial@e6ce0000 { + compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + reg = <0 0xe6ce0000 0 64>; + interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif2: serial@e6e58000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6e58000 0 64>; + interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif3: serial@e6ea8000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6ea8000 0 64>; + interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF3>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif4: serial@e6ee0000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6ee0000 0 64>; + interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF4>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif5: serial@e6ee8000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6ee8000 0 64>; + interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF5>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + reg = <0 0xe62c0000 0 96>; + interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + reg = <0 0xe62c8000 0 96>; + interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + hscif2: serial@e62d0000 { + compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + reg = <0 0xe62d0000 0 96>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + clocks { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* External root clock */ + extal_clk: extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overriden by the board. */ + clock-frequency = <0>; + clock-output-names = "extal"; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7794-cpg-clocks", + "renesas,rcar-gen2-cpg-clocks"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0", "pll1", "pll3", + "lb", "qspi", "sdh", "sd0", "z"; + }; + + /* Fixed factor clocks */ + pll1_div2_clk: pll1_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "pll1_div2"; + }; + zg_clk: zg_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <6>; + clock-mult = <1>; + clock-output-names = "zg"; + }; + zx_clk: zx_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "zx"; + }; + zs_clk: zs_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <6>; + clock-mult = <1>; + clock-output-names = "zs"; + }; + hp_clk: hp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "hp"; + }; + i_clk: i_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "i"; + }; + b_clk: b_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "b"; + }; + p_clk: p_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <24>; + clock-mult = <1>; + clock-output-names = "p"; + }; + cl_clk: cl_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <48>; + clock-mult = <1>; + clock-output-names = "cl"; + }; + m2_clk: m2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "m2"; + }; + imp_clk: imp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "imp"; + }; + rclk_clk: rclk_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <(48 * 1024)>; + clock-mult = <1>; + clock-output-names = "rclk"; + }; + oscclk_clk: oscclk_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <(12 * 1024)>; + clock-mult = <1>; + clock-output-names = "oscclk"; + }; + zb3_clk: zb3_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "zb3"; + }; + zb3d2_clk: zb3d2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "zb3d2"; + }; + ddr_clk: ddr_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "ddr"; + }; + mp_clk: mp_clk { + compatible = "fixed-factor-clock"; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-div = <15>; + clock-mult = <1>; + clock-output-names = "mp"; + }; + cp_clk: cp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <48>; + clock-mult = <1>; + clock-output-names = "cp"; + }; + + acp_clk: acp_clk { + compatible = "fixed-factor-clock"; + clocks = <&extal_clk>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "acp"; + }; + + /* Gate clocks */ + mstp0_clks: mstp0_clks@e6150130 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; + clocks = <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = <R8A7794_CLK_MSIOF0>; + clock-output-names = "msiof0"; + }; + mstp1_clks: mstp1_clks@e6150134 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; + clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + <&cp_clk>, + <&zs_clk>, <&zs_clk>, <&zs_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_TMU1 R8A7794_CLK_TMU3 R8A7794_CLK_TMU2 + R8A7794_CLK_CMT0 R8A7794_CLK_TMU0 + >; + clock-output-names = + "tmu1", "tmu3", "tmu2", "cmt0", "tmu0"; + }; + mstp2_clks: mstp2_clks@e6150138 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, + <&mp_clk>, <&mp_clk>, <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_SCIFA2 R8A7794_CLK_SCIFA1 R8A7794_CLK_SCIFA0 + R8A7794_CLK_MSIOF2 R8A7794_CLK_SCIFB0 R8A7794_CLK_SCIFB1 + R8A7794_CLK_MSIOF1 R8A7794_CLK_SCIFB2 + >; + clock-output-names = + "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", + "scifb1", "msiof1", "scifb2"; + }; + mstp3_clks: mstp3_clks@e615013c { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; + clocks = <&rclk_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_CMT1 + >; + clock-output-names = + "cmt1"; + }; + mstp7_clks: mstp7_clks@e615014c { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; + clocks = <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, + <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5 + R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0 + R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1 + R8A7794_CLK_SCIF0 + >; + clock-output-names = + "hscif2", "scif5", "scif4", "hscif1", "hscif0", + "scif3", "scif2", "scif1", "scif0"; + }; + mstp8_clks: mstp8_clks@e6150990 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; + clocks = <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_ETHER + >; + clock-output-names = + "ether"; + }; + mstp11_clks: mstp11_clks@e615099c { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_SCIFA3 R8A7794_CLK_SCIFA4 R8A7794_CLK_SCIFA5 + >; + clock-output-names = "scifa3", "scifa4", "scifa5"; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index c9d912da6141..d5344510c676 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -152,12 +152,8 @@ pinctrl-names = "default"; pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; - - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; &mmc1 { /* wifi */ @@ -168,11 +164,8 @@ pinctrl-names = "default"; pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; &uart0 { diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 879a818fba51..ad9c2db59670 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -179,6 +179,27 @@ bias-disable; }; + emmc { + emmc_clk: emmc-clk { + rockchip,pins = <RK_GPIO3 31 RK_FUNC_2 &pcfg_pull_default>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <RK_GPIO4 9 RK_FUNC_2 &pcfg_pull_default>; + }; + + emmc_rst: emmc-rst { + rockchip,pins = <RK_GPIO4 10 RK_FUNC_2 &pcfg_pull_default>; + }; + + /* + * The data pins are shared between nandc and emmc and + * not accessible through pinctrl. Also they should've + * been already set correctly by firmware, as + * flash/emmc is the boot-device. + */ + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>, @@ -238,6 +259,42 @@ }; }; + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_default>; + }; + spi0_cs0: spi0-cs0 { + rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_default>; + }; + spi0_tx: spi0-tx { + rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_default>; + }; + spi0_rx: spi0-rx { + rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_default>; + }; + spi0_cs1: spi0-cs1 { + rockchip,pins = <RK_GPIO4 15 RK_FUNC_1 &pcfg_pull_default>; + }; + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = <RK_GPIO2 19 RK_FUNC_2 &pcfg_pull_default>; + }; + spi1_cs0: spi1-cs0 { + rockchip,pins = <RK_GPIO2 20 RK_FUNC_2 &pcfg_pull_default>; + }; + spi1_rx: spi1-rx { + rockchip,pins = <RK_GPIO2 22 RK_FUNC_2 &pcfg_pull_default>; + }; + spi1_tx: spi1-tx { + rockchip,pins = <RK_GPIO2 21 RK_FUNC_2 &pcfg_pull_default>; + }; + spi1_cs1: spi1-cs1 { + rockchip,pins = <RK_GPIO2 23 RK_FUNC_2 &pcfg_pull_default>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>, @@ -406,6 +463,16 @@ pinctrl-0 = <&pwm3_out>; }; +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 5e4e3c238b2d..39f66e349445 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -65,6 +65,19 @@ pinctrl-0 = <&ir_recv_pin>; }; + vcc_otg: usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + vcc_sd0: sdmmc-regulator { compatible = "regulator-fixed"; regulator-name = "sdmmc-supply"; @@ -74,12 +87,36 @@ startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; + + vcc_host: usb-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "host-pwr"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; }; &i2c1 { status = "okay"; clock-frequency = <400000>; + rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int>; + #clock-cells = <0>; + clock-output-names = "xin32k"; + }; + act8846: act8846@5a { compatible = "active-semi,act8846"; reg = <0x5a>; @@ -149,7 +186,6 @@ regulator-name = "VCC_RMII"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-always-on; }; vccio_wl: REG10 { @@ -183,11 +219,8 @@ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; &pinctrl { @@ -201,11 +234,26 @@ }; }; + hym8563 { + rtc_int: rtc-int { + rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + ir-receiver { ir_recv_pin: ir-recv-pin { rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &uart0 { @@ -224,6 +272,14 @@ status = "okay"; }; +&usb_host { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + &wdt { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index ee801a9c6b74..82732f5249b2 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -147,6 +147,27 @@ bias-disable; }; + emmc { + emmc_clk: emmc-clk { + rockchip,pins = <RK_GPIO0 24 RK_FUNC_2 &pcfg_pull_none>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <RK_GPIO0 26 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_rst: emmc-rst { + rockchip,pins = <RK_GPIO0 27 RK_FUNC_2 &pcfg_pull_none>; + }; + + /* + * The data pins are shared between nandc and emmc and + * not accessible through pinctrl. Also they should've + * been already set correctly by firmware, as + * flash/emmc is the boot-device. + */ + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>, @@ -206,6 +227,42 @@ }; }; + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_cs0: spi0-cs0 { + rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_tx: spi0-tx { + rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_rx: spi0-rx { + rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_cs1: spi0-cs1 { + rockchip,pins = <RK_GPIO1 15 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_up>; + }; + spi1_cs0: spi1-cs0 { + rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_up>; + }; + spi1_rx: spi1-rx { + rockchip,pins = <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_up>; + }; + spi1_tx: spi1-tx { + rockchip,pins = <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_up>; + }; + spi1_cs1: spi1-cs1 { + rockchip,pins = <RK_GPIO1 14 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>, @@ -381,6 +438,18 @@ pinctrl-0 = <&pwm3_out>; }; +&spi0 { + compatible = "rockchip,rk3188-spi", "rockchip,rk3066-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; +}; + +&spi1 { + compatible = "rockchip,rk3188-spi", "rockchip,rk3066-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index 7d59ff4de408..a76dd44adb53 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -26,7 +26,7 @@ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; + pinctrl-0 = <&pmic_int>; #clock-cells = <0>; clock-output-names = "xin32k"; @@ -124,11 +124,3 @@ }; }; }; - -&pinctrl { - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index 9a88b6c66396..ff522f8e3df4 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -16,3 +16,135 @@ / { compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; }; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + + vcc8-supply = <&vcc_18>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vccio_pmu>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd_arm"; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + }; + + vccio_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_pmu"; + }; + + vcc_tp: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_tp"; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + }; + + vcc18_lcd: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + }; + + vcca_codec: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_codec"; + }; + + vcc_wl: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_wl"; + }; + + vcc_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_lcd"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 4f572093c8b4..cb83cea52fa1 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -10,6 +10,7 @@ * GNU General Public License for more details. */ +#include <dt-bindings/pwm/pwm.h> #include "rk3288.dtsi" / { @@ -17,6 +18,48 @@ reg = <0x0 0x80000000>; }; + backlight { + compatible = "pwm-backlight"; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <128>; + enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>; + }; + gpio-keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -49,6 +92,30 @@ }; }; +&emmc { + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; /* wp not hooked up */ + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "okay"; +}; + &i2c0 { status = "okay"; }; @@ -57,6 +124,10 @@ status = "okay"; }; +&pwm0 { + status = "okay"; +}; + &uart0 { status = "okay"; }; @@ -78,12 +149,24 @@ }; &pinctrl { + backlight { + bl_en: bl-en { + rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + buttons { pwrbtn: pwrbtn { rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + pmic { + pmic_int: pmic-int { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + usb { host_vbus_drv: host-vbus-drv { rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; @@ -94,3 +177,7 @@ &usb_host0_ehci { status = "okay"; }; + +&usb_host1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 5950b0a53224..874e66dbb93b 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -29,11 +29,18 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + mshc0 = &emmc; + mshc1 = &sdmmc; + mshc2 = &sdio0; + mshc3 = &sdio1; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; serial3 = &uart3; serial4 = &uart4; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; }; cpus { @@ -62,6 +69,44 @@ }; }; + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dmac_peri: dma-controller@ff250000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xff250000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC2>; + clock-names = "apb_pclk"; + }; + + dmac_bus_ns: dma-controller@ff600000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xff600000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dmac_bus_s: dma-controller@ffb20000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xffb20000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + }; + }; + xin24m: oscillator { compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -78,6 +123,95 @@ clock-frequency = <24000000>; }; + sdmmc: dwmmc@ff0c0000 { + compatible = "rockchip,rk3288-dw-mshc"; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xff0c0000 0x4000>; + status = "disabled"; + }; + + sdio0: dwmmc@ff0d0000 { + compatible = "rockchip,rk3288-dw-mshc"; + clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xff0d0000 0x4000>; + status = "disabled"; + }; + + sdio1: dwmmc@ff0e0000 { + compatible = "rockchip,rk3288-dw-mshc"; + clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xff0e0000 0x4000>; + status = "disabled"; + }; + + emmc: dwmmc@ff0f0000 { + compatible = "rockchip,rk3288-dw-mshc"; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xff0f0000 0x4000>; + status = "disabled"; + }; + + saradc: saradc@ff100000 { + compatible = "rockchip,saradc"; + reg = <0xff100000 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + status = "disabled"; + }; + + spi0: spi@ff110000 { + compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; + reg = <0xff110000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@ff120000 { + compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; + reg = <0xff120000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@ff130000 { + compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; + reg = <0xff130000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c1: i2c@ff140000 { compatible = "rockchip,rk3288-i2c"; reg = <0xff140000 0x1000>; @@ -206,6 +340,26 @@ /* NOTE: ohci@ff520000 doesn't actually work on hardware */ + usb_host1: usb@ff540000 { + compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0xff540000 0x40000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_USBHOST1>; + clock-names = "otg"; + status = "disabled"; + }; + + usb_otg: usb@ff580000 { + compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0xff580000 0x40000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG0>; + clock-names = "otg"; + status = "disabled"; + }; + usb_hsic: usb@ff5c0000 { compatible = "generic-ehci"; reg = <0xff5c0000 0x100>; @@ -241,6 +395,50 @@ status = "disabled"; }; + pwm0: pwm@ff680000 { + compatible = "rockchip,rk3288-pwm"; + reg = <0xff680000 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + status = "disabled"; + }; + + pwm1: pwm@ff680010 { + compatible = "rockchip,rk3288-pwm"; + reg = <0xff680010 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + status = "disabled"; + }; + + pwm2: pwm@ff680020 { + compatible = "rockchip,rk3288-pwm"; + reg = <0xff680020 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + status = "disabled"; + }; + + pwm3: pwm@ff680030 { + compatible = "rockchip,rk3288-pwm"; + reg = <0xff680030 0x10>; + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + status = "disabled"; + }; + pmu: power-management@ff730000 { compatible = "rockchip,rk3288-pmu", "syscon"; reg = <0xff730000 0x100>; @@ -271,6 +469,21 @@ status = "disabled"; }; + i2s: i2s@ff890000 { + compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; + reg = <0xff890000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>; + dma-names = "tx", "rx"; + clock-names = "i2s_hclk", "i2s_clk"; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + status = "disabled"; + }; + gic: interrupt-controller@ffc01000 { compatible = "arm,gic-400"; interrupt-controller; @@ -463,6 +676,17 @@ }; }; + i2s0 { + i2s0_bus: i2s0-bus { + rockchip,pins = <6 0 RK_FUNC_1 &pcfg_pull_none>, + <6 1 RK_FUNC_1 &pcfg_pull_none>, + <6 2 RK_FUNC_1 &pcfg_pull_none>, + <6 3 RK_FUNC_1 &pcfg_pull_none>, + <6 4 RK_FUNC_1 &pcfg_pull_none>, + <6 8 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + sdmmc { sdmmc_clk: sdmmc-clk { rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>; @@ -488,6 +712,88 @@ }; }; + sdio0 { + sdio0_bus1: sdio0-bus1 { + rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_bus4: sdio0-bus4 { + rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>, + <4 21 RK_FUNC_1 &pcfg_pull_up>, + <4 22 RK_FUNC_1 &pcfg_pull_up>, + <4 23 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_cmd: sdio0-cmd { + rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_clk: sdio0-clk { + rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none>; + }; + + sdio0_cd: sdio0-cd { + rockchip,pins = <4 26 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_wp: sdio0-wp { + rockchip,pins = <4 27 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_pwr: sdio0-pwr { + rockchip,pins = <4 28 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_bkpwr: sdio0-bkpwr { + rockchip,pins = <4 29 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_int: sdio0-int { + rockchip,pins = <4 30 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + sdio1 { + sdio1_bus1: sdio1-bus1 { + rockchip,pins = <3 24 4 &pcfg_pull_up>; + }; + + sdio1_bus4: sdio1-bus4 { + rockchip,pins = <3 24 4 &pcfg_pull_up>, + <3 25 4 &pcfg_pull_up>, + <3 26 4 &pcfg_pull_up>, + <3 27 4 &pcfg_pull_up>; + }; + + sdio1_cd: sdio1-cd { + rockchip,pins = <3 28 4 &pcfg_pull_up>; + }; + + sdio1_wp: sdio1-wp { + rockchip,pins = <3 29 4 &pcfg_pull_up>; + }; + + sdio1_bkpwr: sdio1-bkpwr { + rockchip,pins = <3 30 4 &pcfg_pull_up>; + }; + + sdio1_int: sdio1-int { + rockchip,pins = <3 31 4 &pcfg_pull_up>; + }; + + sdio1_cmd: sdio1-cmd { + rockchip,pins = <4 6 4 &pcfg_pull_up>; + }; + + sdio1_clk: sdio1-clk { + rockchip,pins = <4 7 4 &pcfg_pull_none>; + }; + + sdio1_pwr: sdio1-pwr { + rockchip,pins = <4 9 4 &pcfg_pull_up>; + }; + }; + emmc { emmc_clk: emmc-clk { rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none>; @@ -524,6 +830,56 @@ }; }; + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = <5 12 RK_FUNC_1 &pcfg_pull_up>; + }; + spi0_cs0: spi0-cs0 { + rockchip,pins = <5 13 RK_FUNC_1 &pcfg_pull_up>; + }; + spi0_tx: spi0-tx { + rockchip,pins = <5 14 RK_FUNC_1 &pcfg_pull_up>; + }; + spi0_rx: spi0-rx { + rockchip,pins = <5 15 RK_FUNC_1 &pcfg_pull_up>; + }; + spi0_cs1: spi0-cs1 { + rockchip,pins = <5 16 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = <7 12 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_cs0: spi1-cs0 { + rockchip,pins = <7 13 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_rx: spi1-rx { + rockchip,pins = <7 14 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_tx: spi1-tx { + rockchip,pins = <7 15 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + spi2 { + spi2_cs1: spi2-cs1 { + rockchip,pins = <8 3 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_clk: spi2-clk { + rockchip,pins = <8 6 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_cs0: spi2-cs0 { + rockchip,pins = <8 7 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_rx: spi2-rx { + rockchip,pins = <8 8 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_tx: spi2-tx { + rockchip,pins = <8 9 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>, @@ -591,5 +947,29 @@ rockchip,pins = <5 15 3 &pcfg_pull_none>; }; }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = <7 0 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = <7 1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = <7 22 3 &pcfg_pull_none>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = <7 23 3 &pcfg_pull_none>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 8caf85d83901..7332d12eb565 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -26,6 +26,49 @@ i2c2 = &i2c2; i2c3 = &i2c3; i2c4 = &i2c4; + mshc0 = &emmc; + mshc1 = &mmc0; + mshc2 = &mmc1; + spi0 = &spi0; + spi1 = &spi1; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dmac1_s: dma-controller@20018000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20018000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMA1>; + clock-names = "apb_pclk"; + }; + + dmac1_ns: dma-controller@2001c000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x2001c000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMA1>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dmac2: dma-controller@20078000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20078000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMA2>; + clock-names = "apb_pclk"; + }; }; xin24m: oscillator { @@ -91,12 +134,28 @@ status = "disabled"; }; + usb_otg: usb@10180000 { + compatible = "rockchip,rk3066-usb", "snps,dwc2"; + reg = <0x10180000 0x40000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG0>; + clock-names = "otg"; + status = "disabled"; + }; + + usb_host: usb@101c0000 { + compatible = "snps,dwc2"; + reg = <0x101c0000 0x40000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG1>; + clock-names = "otg"; + status = "disabled"; + }; + mmc0: dwmmc@10214000 { compatible = "rockchip,rk2928-dw-mshc"; reg = <0x10214000 0x1000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; clock-names = "biu", "ciu"; @@ -108,8 +167,6 @@ compatible = "rockchip,rk2928-dw-mshc"; reg = <0x10218000 0x1000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>; clock-names = "biu", "ciu"; @@ -117,6 +174,17 @@ status = "disabled"; }; + emmc: dwmmc@1021c000 { + compatible = "rockchip,rk2928-dw-mshc"; + reg = <0x1021c000 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; + clock-names = "biu", "ciu"; + + status = "disabled"; + }; + pmu: pmu@20004000 { compatible = "rockchip,rk3066-pmu", "syscon"; reg = <0x20004000 0x100>; @@ -135,7 +203,6 @@ #size-cells = <0>; rockchip,grf = <&grf>; - rockchip,bus-index = <0>; clock-names = "i2c"; clocks = <&cru PCLK_I2C0>; @@ -264,4 +331,36 @@ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; status = "disabled"; }; + + saradc: saradc@2006c000 { + compatible = "rockchip,saradc"; + reg = <0x2006c000 0x100>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + status = "disabled"; + }; + + spi0: spi@20070000 { + compatible = "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x20070000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@20074000 { + compatible = "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x20074000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 45013b867c8d..5f4144d1e3a1 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -177,6 +177,9 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf001c000 0x100>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, + <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; clocks = <&usart0_clk>; @@ -188,6 +191,9 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf0020000 0x100>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>, + <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; clocks = <&usart1_clk>; @@ -333,6 +339,9 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>, + <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; clocks = <&usart2_clk>; @@ -344,6 +353,9 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>, + <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; clocks = <&usart3_clk>; @@ -402,14 +414,19 @@ }; ramc0: ramc@ffffea00 { - compatible = "atmel,at91sam9g45-ddramc"; + compatible = "atmel,sama5d3-ddramc"; reg = <0xffffea00 0x200>; + clocks = <&ddrck>, <&mpddr_clk>; + clock-names = "ddrck", "mpddr"; }; dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>, + <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; clocks = <&dbgu_clk>; @@ -428,7 +445,7 @@ pinctrl@fffff200 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; ranges = <0xfffff200 0xfffff200 0xa00>; atmel,mux-mask = < /* A B C */ @@ -1003,6 +1020,11 @@ reg = <2>; }; + hsmc_clk: hsmc_clk { + #clock-cells = <0>; + reg = <5>; + }; + pioA_clk: pioA_clk { #clock-cells = <0>; reg = <6>; @@ -1170,6 +1192,11 @@ #clock-cells = <0>; reg = <48>; }; + + mpddr_clk: mpddr_clk { + #clock-cells = <0>; + reg = <49>; + }; }; }; @@ -1178,6 +1205,11 @@ reg = <0xfffffe00 0x10>; }; + shutdown-controller@fffffe10 { + compatible = "atmel,at91sam9x5-shdwc"; + reg = <0xfffffe10 0x10>; + }; + pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; @@ -1393,6 +1425,7 @@ 0xffffc000 0x00000070 /* NFC HSMC regs */ 0x00200000 0x00100000 /* NFC SRAM banks */ >; + clocks = <&hsmc_clk>; }; }; }; diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi index a0775851cce5..eaf41451ad0c 100644 --- a/arch/arm/boot/dts/sama5d3_can.dtsi +++ b/arch/arm/boot/dts/sama5d3_can.dtsi @@ -40,7 +40,7 @@ atmel,clk-output-range = <0 66000000>; }; - can1_clk: can0_clk { + can1_clk: can1_clk { #clock-cells = <0>; reg = <41>; atmel,clk-output-range = <0 66000000>; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index f7d8583eef82..962dc28dc37b 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -36,6 +36,36 @@ macb0: ethernet@f0028000 { phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; + + ethernet-phy@7 { + reg = <0x7>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; }; pmc: pmc@fffffc00 { diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index b8c6f20e780c..49c10d33df30 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -25,6 +25,8 @@ }; spi0: spi@f0004000 { + dmas = <0>, <0>; /* Do not use DMA for spi0 */ + m25p80@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; @@ -51,6 +53,7 @@ }; usart1: serial@f0020000 { + dmas = <0>, <0>; /* Do not use DMA for usart1 */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; status = "okay"; @@ -132,6 +135,7 @@ }; dbgu: serial@ffffee00 { + dmas = <0>, <0>; /* Do not use DMA for dbgu */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 99659db97e89..30ef97e99dc5 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -66,7 +66,7 @@ }; vmmc_sdhi0: regulator@2 { - compatible = "regulator-fixed"; + compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -75,7 +75,7 @@ }; vmmc_sdhi2: regulator@3 { - compatible = "regulator-fixed"; + compatible = "regulator-fixed"; regulator-name = "SDHI2 Vcc"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index d7f52cf31350..030a5920312f 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -14,6 +14,7 @@ / { compatible = "renesas,sh73a0"; + interrupt-parent = <&gic>; cpus { #address-cells = <1>; @@ -66,7 +67,6 @@ <0xe6900020 1>, <0xe6900040 1>, <0xe6900060 1>; - interrupt-parent = <&gic>; interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH 0 2 IRQ_TYPE_LEVEL_HIGH 0 3 IRQ_TYPE_LEVEL_HIGH @@ -86,7 +86,6 @@ <0xe6900024 1>, <0xe6900044 1>, <0xe6900064 1>; - interrupt-parent = <&gic>; interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH 0 10 IRQ_TYPE_LEVEL_HIGH 0 11 IRQ_TYPE_LEVEL_HIGH @@ -107,7 +106,6 @@ <0xe6900028 1>, <0xe6900048 1>, <0xe6900068 1>; - interrupt-parent = <&gic>; interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH 0 18 IRQ_TYPE_LEVEL_HIGH 0 19 IRQ_TYPE_LEVEL_HIGH @@ -127,7 +125,6 @@ <0xe690002c 1>, <0xe690004c 1>, <0xe690006c 1>; - interrupt-parent = <&gic>; interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH 0 26 IRQ_TYPE_LEVEL_HIGH 0 27 IRQ_TYPE_LEVEL_HIGH @@ -143,7 +140,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6820000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH 0 168 IRQ_TYPE_LEVEL_HIGH 0 169 IRQ_TYPE_LEVEL_HIGH @@ -156,7 +152,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6822000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH 0 52 IRQ_TYPE_LEVEL_HIGH 0 53 IRQ_TYPE_LEVEL_HIGH @@ -169,7 +164,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6824000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH 0 172 IRQ_TYPE_LEVEL_HIGH 0 173 IRQ_TYPE_LEVEL_HIGH @@ -182,7 +176,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6826000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH 0 184 IRQ_TYPE_LEVEL_HIGH 0 185 IRQ_TYPE_LEVEL_HIGH @@ -195,7 +188,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6828000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH 0 188 IRQ_TYPE_LEVEL_HIGH 0 189 IRQ_TYPE_LEVEL_HIGH @@ -206,7 +198,6 @@ mmcif: mmc@e6bd0000 { compatible = "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH 0 141 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <4>; @@ -216,7 +207,6 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee100000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH 0 84 IRQ_TYPE_LEVEL_HIGH 0 85 IRQ_TYPE_LEVEL_HIGH>; @@ -228,7 +218,6 @@ sdhi1: sd@ee120000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee120000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH 0 89 IRQ_TYPE_LEVEL_HIGH>; toshiba,mmc-wrprotect-disable; @@ -239,7 +228,6 @@ sdhi2: sd@ee140000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee140000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH 0 105 IRQ_TYPE_LEVEL_HIGH>; toshiba,mmc-wrprotect-disable; @@ -250,7 +238,6 @@ scifa0: serial@e6c40000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c40000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -258,7 +245,6 @@ scifa1: serial@e6c50000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c50000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -266,7 +252,6 @@ scifa2: serial@e6c60000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c60000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -274,7 +259,6 @@ scifa3: serial@e6c70000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c70000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -282,7 +266,6 @@ scifa4: serial@e6c80000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c80000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -290,7 +273,6 @@ scifa5: serial@e6cb0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cb0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -298,7 +280,6 @@ scifa6: serial@e6cc0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cc0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -306,7 +287,6 @@ scifa7: serial@e6cd0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cd0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -314,7 +294,6 @@ scifb8: serial@e6c30000 { compatible = "renesas,scifb-sh73a0", "renesas,scifb"; reg = <0xe6c30000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -340,7 +319,6 @@ #sound-dai-cells = <1>; compatible = "renesas,sh_fsi2"; reg = <0xec230000 0x400>; - interrupt-parent = <&gic>; interrupts = <0 146 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 4d77ad690ed5..45fce2cf6fed 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -607,6 +607,17 @@ }; }; + sdr: sdr@ffc25000 { + compatible = "syscon"; + reg = <0xffc25000 0x1000>; + }; + + sdramedac { + compatible = "altr,sdram-edac"; + altr,sdr-syscon = <&sdr>; + interrupts = <0 39 4>; + }; + L2: l2-cache@fffef000 { compatible = "arm,pl310-cache"; reg = <0xfffef000 0x1000>; diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi index 12d1c2ccaf5b..03e8268ae219 100644 --- a/arch/arm/boot/dts/socfpga_arria5.dtsi +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi @@ -15,6 +15,8 @@ */ /dts-v1/; +/* First 4KB has trampoline code for secondary cores. */ +/memreserve/ 0x00000000 0x0001000; #include "socfpga.dtsi" / { @@ -29,13 +31,10 @@ dwmmc0@ff704000 { num-slots = <1>; - supports-highspeed; broken-cd; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; }; sysmgr@ffd08000 { diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index d532d171e391..27d551c384d0 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -37,13 +37,6 @@ */ ethernet0 = &gmac1; }; - - aliases { - /* this allow the ethaddr uboot environmnet variable contents - * to be added to the gmac1 device tree blob. - */ - ethernet0 = &gmac1; - }; }; &gmac1 { diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi index bf511828729f..28c05e7a31c9 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi @@ -16,6 +16,8 @@ */ /dts-v1/; +/* First 4KB has trampoline code for secondary cores. */ +/memreserve/ 0x00000000 0x0001000; #include "socfpga.dtsi" / { @@ -28,15 +30,12 @@ }; }; - dwmmc0@ff704000 { + mmc0: dwmmc0@ff704000 { num-slots = <1>; - supports-highspeed; broken-cd; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; }; ethernet@ff702000 { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index 45de1514af0a..d7296a5f750c 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -68,6 +68,10 @@ }; }; +&mmc0 { + cd-gpios = <&gpio1 18 0>; +}; + &usb1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts index 09792b411110..f9345e02ca49 100644 --- a/arch/arm/boot/dts/socfpga_vt.dts +++ b/arch/arm/boot/dts/socfpga_vt.dts @@ -43,13 +43,10 @@ dwmmc0@ff704000 { num-slots = <1>; - supports-highspeed; broken-cd; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; }; ethernet@ff700000 { diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 459cb6377764..380f914b226d 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -339,12 +339,22 @@ #size-cells = <1>; ranges; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <27>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 27>, <&dma 1 26>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -356,6 +366,8 @@ interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 9>, <&dma 1 8>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -451,6 +463,8 @@ interrupts = <12>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 29>, <&dma 1 28>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -490,6 +504,8 @@ interrupts = <50>; clocks = <&ahb_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 31>, <&dma 1 30>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -749,7 +765,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -760,7 +775,6 @@ reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -771,7 +785,6 @@ reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 24b0ad3a7c07..d73a2287b37a 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -300,12 +300,22 @@ #size-cells = <1>; ranges; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <27>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 27>, <&dma 1 26>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -317,6 +327,8 @@ interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 9>, <&dma 1 8>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -403,6 +415,8 @@ interrupts = <12>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 29>, <&dma 1 28>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -564,7 +578,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; - clock-frequency = <100000>; status = "disabled"; }; @@ -575,7 +588,6 @@ reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; - clock-frequency = <100000>; status = "disabled"; }; @@ -586,7 +598,6 @@ reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; - clock-frequency = <100000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts new file mode 100644 index 000000000000..8b3cd0907b32 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -0,0 +1,130 @@ +/* + * Copyright 2014 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "sun5i-a13.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "HSG H702"; + compatible = "hsg,h702", "allwinner,sun5i-a13"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + /* + * There doesn't seem to be a GPIO for controlling + * usb1 vbus, despite the fex file saying otherwise. + */ + usb1_vbus-supply = <®_vcc5v0>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + pinctrl@01c20800 { + mmc0_cd_pin_h702: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + }; + + uart1: serial@01c28400 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index bf86e65dd167..c4b5d7825b9f 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -298,12 +298,22 @@ #size-cells = <1>; ranges; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <27>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 27>, <&dma 1 26>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -315,6 +325,8 @@ interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 9>, <&dma 1 8>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -376,6 +388,8 @@ interrupts = <12>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 29>, <&dma 1 28>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -490,7 +504,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -501,7 +514,6 @@ reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -512,7 +524,6 @@ reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index e06fbfc55bb7..543f895d18d3 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -3,12 +3,48 @@ * * Maxime Ripard <maxime.ripard@free-electrons.com> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /include/ "skeleton.dtsi" @@ -657,7 +693,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <0 6 4>; clocks = <&apb2_gates 0>; - clock-frequency = <100000>; resets = <&apb2_rst 0>; status = "disabled"; #address-cells = <1>; @@ -669,7 +704,6 @@ reg = <0x01c2b000 0x400>; interrupts = <0 7 4>; clocks = <&apb2_gates 1>; - clock-frequency = <100000>; resets = <&apb2_rst 1>; status = "disabled"; #address-cells = <1>; @@ -681,7 +715,6 @@ reg = <0x01c2b400 0x400>; interrupts = <0 8 4>; clocks = <&apb2_gates 2>; - clock-frequency = <100000>; resets = <&apb2_rst 2>; status = "disabled"; #address-cells = <1>; @@ -693,7 +726,6 @@ reg = <0x01c2b800 0x400>; interrupts = <0 9 4>; clocks = <&apb2_gates 3>; - clock-frequency = <100000>; resets = <&apb2_rst 3>; status = "disabled"; #address-cells = <1>; @@ -787,6 +819,12 @@ interrupts = <1 9 0xf04>; }; + rtc: rtc@01f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = <0 40 4>, <0 41 4>; + }; + nmi_intc: interrupt-controller@01f00c0c { compatible = "allwinner,sun6i-a31-sc-nmi"; interrupt-controller; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts new file mode 100644 index 000000000000..0e4bfa3b2b85 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -0,0 +1,236 @@ +/* + * Copyright 2013 Wills Wang + * + * Wills Wang <wills.wang.open@gmail.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Merrii A20 Hummingbird"; + compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + mmc3: mmc@01c12000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_mmc3_vdd>; + bus-width = <4>; + non-removable; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + target-supply = <®_ahci_5v>; + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pio: pinctrl@01c20800 { + ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { + allwinner,pins = "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + pwm: pwm@01c20e00 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + uart2: serial@01c28800 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; + }; + + uart3: serial@01c28c00 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_a>; + status = "okay"; + }; + + uart4: serial@01c29000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; + }; + + uart5: serial@01c29400 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; + + i2c3: i2c@01c2b800 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins_a>; + status = "okay"; + }; + + spi2: spi@01c17000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_b>; + status = "okay"; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_vdd>; + /* phy reset config */ + snps,reset-gpio = <&pio 0 17 0>; /* PA17 */ + snps,reset-active-low; + /* wait 1s after reset, otherwise fail to read phy id */ + snps,reset-delays-us = <0 10000 1000000>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + reg_ahci_5v: ahci-5v { + pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>; + gpio = <&pio 7 15 0>; /* PH15 */ + status = "okay"; + }; + + reg_usb1_vbus: usb1-vbus { + pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>; + gpio = <&pio 7 2 0>; /* PH2 */ + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; + + reg_mmc3_vdd: mmc3_vdd { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_vdd_pin_a20_hummingbird>; + regulator-name = "mmc3_vdd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + enable-active-high; + gpio = <&pio 7 9 0>; /* PH9 */ + }; + + reg_gmac_vdd: gmac_vdd { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_vdd_pin_a20_hummingbird>; + regulator-name = "gmac_vdd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + enable-active-high; + gpio = <&pio 7 16 0>; /* PH16 */ + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts new file mode 100644 index 000000000000..1eb8175959a6 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -0,0 +1,137 @@ +/* + * This is based on sun4i-a10-olinuxino-lime.dts + * + * Copyright 2014 - Hans de Goede <hdegoede@redhat.com> + * Copyright (c) 2014 FUKAUMI Naoki <naobsd@gmail.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Olimex A20-OLinuXino-LIME"; + compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + target-supply = <®_ahci_5v>; + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + led_pins_olinuxinolime: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinolime>; + + green { + label = "a20-olinuxino-lime:green:usr"; + gpios = <&pio 7 2 0>; + default-state = "on"; + }; + }; + + reg_ahci_5v: ahci-5v { + pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; + gpio = <&pio 2 3 0>; + status = "okay"; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 4011628c7381..a96b99465069 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -3,12 +3,48 @@ * * Maxime Ripard <maxime.ripard@free-electrons.com> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /include/ "skeleton.dtsi" @@ -423,12 +459,22 @@ interrupts = <0 0 4>; }; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <0 27 4>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <0 10 4>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 27>, <&dma 1 26>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -440,6 +486,8 @@ interrupts = <0 11 4>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 9>, <&dma 1 8>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -535,6 +583,8 @@ interrupts = <0 12 4>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 29>, <&dma 1 28>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -574,6 +624,8 @@ interrupts = <0 50 4>; clocks = <&ahb_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 31>, <&dma 1 30>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -618,6 +670,27 @@ allwinner,pull = <0>; }; + uart3_pins_a: uart3@0 { + allwinner,pins = "PG6", "PG7", "PG8", "PG9"; + allwinner,function = "uart3"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart4_pins_a: uart4@0 { + allwinner,pins = "PG10", "PG11"; + allwinner,function = "uart4"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart5_pins_a: uart5@0 { + allwinner,pins = "PI10", "PI11"; + allwinner,function = "uart5"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + uart6_pins_a: uart6@0 { allwinner,pins = "PI12", "PI13"; allwinner,function = "uart6"; @@ -653,6 +726,13 @@ allwinner,pull = <0>; }; + i2c3_pins_a: i2c3@0 { + allwinner,pins = "PI0", "PI1"; + allwinner,function = "i2c3"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + emac_pins_a: emac0@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -718,6 +798,13 @@ allwinner,pull = <0>; }; + spi2_pins_b: spi2@1 { + allwinner,pins = "PB14", "PB15", "PB16", "PB17"; + allwinner,function = "spi2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; allwinner,function = "mmc0"; @@ -899,7 +986,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <0 7 4>; clocks = <&apb1_gates 0>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -910,7 +996,6 @@ reg = <0x01c2b000 0x400>; interrupts = <0 8 4>; clocks = <&apb1_gates 1>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -921,7 +1006,6 @@ reg = <0x01c2b400 0x400>; interrupts = <0 9 4>; clocks = <&apb1_gates 2>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -932,7 +1016,6 @@ reg = <0x01c2b800 0x400>; interrupts = <0 88 4>; clocks = <&apb1_gates 3>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -943,7 +1026,6 @@ reg = <0x01c2c000 0x400>; interrupts = <0 89 4>; clocks = <&apb1_gates 15>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index 34002e3eba9d..e9b8cca8dcc1 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -13,6 +13,7 @@ /dts-v1/; /include/ "sun8i-a23.dtsi" +/include/ "sunxi-common-regulators.dtsi" / { model = "Ippo Q8H Dual Core Tablet (v5)"; @@ -23,7 +24,47 @@ }; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 0>; /* PB4 */ + cd-inverted; + status = "okay"; + }; + + pinctrl@01c20800 { + mmc0_cd_pin_q8h: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + /* pull-ups and devices require PMIC regulator */ + status = "failed"; + }; + r_uart: serial@01f02800 { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 54ac0787216a..6146ef15efbe 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -3,12 +3,48 @@ * * Chen-Yu Tsai <wens@csie.org> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /include/ "skeleton.dtsi" @@ -179,6 +215,30 @@ "apb2_uart1", "apb2_uart2", "apb2_uart3", "apb2_uart4"; }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc0"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc1"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc2"; + }; }; soc@01c00000 { @@ -187,6 +247,104 @@ #size-cells = <1>; ranges; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun8i-a23-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <0 50 4>; + clocks = <&ahb1_gates 6>; + resets = <&ahb1_rst 6>; + #dma-cells = <1>; + }; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb1_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 8>; + reset-names = "ahb"; + interrupts = <0 60 4>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb1_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 9>; + reset-names = "ahb"; + interrupts = <0 61 4>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb1_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 10>; + reset-names = "ahb"; + interrupts = <0 62 4>; + status = "disabled"; + }; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun8i-a23-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <0 11 4>, + <0 15 4>, + <0 17 4>; + clocks = <&apb1_gates 5>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5"; + allwinner,function = "mmc1"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PH2", "PH3"; + allwinner,function = "i2c0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PH4", "PH5"; + allwinner,function = "i2c1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PE12", "PE13"; + allwinner,function = "i2c2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + ahb1_rst: reset@01c202c0 { #reset-cells = <1>; compatible = "allwinner,sun6i-a31-clock-reset"; @@ -227,6 +385,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 16>; resets = <&apb2_rst 16>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -238,6 +398,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 17>; resets = <&apb2_rst 17>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -249,6 +411,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 18>; resets = <&apb2_rst 18>; + dmas = <&dma 8>, <&dma 8>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -260,6 +424,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 19>; resets = <&apb2_rst 19>; + dmas = <&dma 9>, <&dma 9>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -271,9 +437,44 @@ reg-io-width = <4>; clocks = <&apb2_gates 20>; resets = <&apb2_rst 20>; + dmas = <&dma 10>, <&dma 10>; + dma-names = "rx", "tx"; status = "disabled"; }; + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <0 6 4>; + clocks = <&apb2_gates 0>; + resets = <&apb2_rst 0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <0 7 4>; + clocks = <&apb2_gates 1>; + resets = <&apb2_rst 1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <0 8 4>; + clocks = <&apb2_gates 2>; + resets = <&apb2_rst 2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, @@ -285,6 +486,12 @@ interrupts = <1 9 0xf04>; }; + rtc: rtc@01f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = <0 40 4>, <0 41 4>; + }; + prcm@01f01400 { compatible = "allwinner,sun8i-a23-prcm"; reg = <0x01f01400 0x200>; @@ -339,5 +546,25 @@ resets = <&apb0_rst 4>; status = "disabled"; }; + + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun8i-a23-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <0 45 4>; + clocks = <&apb0_gates 0>; + resets = <&apb0_rst 0>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + + r_uart_pins_a: r_uart@0 { + allwinner,pins = "PL2", "PL3"; + allwinner,function = "s_uart"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index 3d021efd1a38..c9c5b10e03eb 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -86,4 +86,11 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; }; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 80b8eddb4105..2ca9c1807f72 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -157,6 +157,11 @@ #reset-cells = <1>; }; + flow-controller@60007000 { + compatible = "nvidia,tegra114-flowctrl"; + reg = <0x60007000 0x1000>; + }; + apbdma: dma@6000a000 { compatible = "nvidia,tegra114-apbdma"; reg = <0x6000a000 0x1400>; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 624b0fba2d0a..029c9a021541 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -16,6 +16,26 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; + pcie-controller@0,01003000 { + status = "okay"; + + avddio-pex-supply = <&vdd_1v05_run>; + dvddio-pex-supply = <&vdd_1v05_run>; + avdd-pex-pll-supply = <&vdd_1v05_run>; + hvdd-pex-supply = <&vdd_3v3_lp0>; + hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; + vddio-pex-ctl-supply = <&vdd_3v3_lp0>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + + pci@1,0 { + status = "okay"; + }; + + pci@2,0 { + status = "okay"; + }; + }; + host1x@0,50000000 { hdmi@0,54280000 { status = "okay"; @@ -31,10 +51,10 @@ }; pinmux: pinmux@0,70000868 { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; + pinctrl-names = "boot"; + pinctrl-0 = <&state_boot>; - state_default: pinmux { + state_boot: pinmux { clk_32k_out_pa0 { nvidia,pins = "clk_32k_out_pa0"; nvidia,function = "soc"; @@ -1231,6 +1251,41 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; + pex_l0_rst_n_pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "pe0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l0_clkreq_n_pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "pe0"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_wake_n_pdd3 { + nvidia,pins = "pex_wake_n_pdd3"; + nvidia,function = "pe"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l1_rst_n_pdd5 { + nvidia,pins = "pex_l1_rst_n_pdd5"; + nvidia,function = "pe1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l1_clkreq_n_pdd6 { + nvidia,pins = "pex_l1_clkreq_n_pdd6"; + nvidia,function = "pe1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; clk3_out_pee0 { nvidia,pins = "clk3_out_pee0"; nvidia,function = "extperiph3"; @@ -1515,7 +1570,7 @@ regulator-always-on; }; - ldo0 { + avdd_1v05_run: ldo0 { regulator-name = "+1.05V_RUN_AVDD"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; @@ -1619,6 +1674,18 @@ nvidia,sys-clock-req-active-high; }; + /* Serial ATA */ + sata@0,70020000 { + status = "okay"; + + hvdd-supply = <&vdd_3v3_lp0>; + vddio-supply = <&vdd_1v05_run>; + avdd-supply = <&vdd_1v05_run>; + + target-5v-supply = <&vdd_5v0_sata>; + target-12v-supply = <&vdd_12v0_sata>; + }; + padctl@0,7009f000 { pinctrl-0 = <&padctl_default>; pinctrl-names = "default"; @@ -1828,6 +1895,29 @@ enable-active-high; vin-supply = <&vdd_5v0_sys>; }; + + /* Molex power connector */ + vdd_5v0_sata: regulator@13 { + compatible = "regulator-fixed"; + reg = <13>; + regulator-name = "+5V_SATA"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_12v0_sata: regulator@14 { + compatible = "regulator-fixed"; + reg = <14>; + regulator-name = "+12V_SATA"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_mux>; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts new file mode 100644 index 000000000000..7d0784ce4c74 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-nyan-big.dts @@ -0,0 +1,1136 @@ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra124.dtsi" + +/ { + model = "Acer Chromebook 13 CB5-311"; + compatible = "google,nyan-big", "nvidia,tegra124"; + + aliases { + rtc0 = "/i2c@0,7000d000/pmic@40"; + rtc1 = "/rtc@0,7000e000"; + }; + + memory { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + host1x@0,50000000 { + hdmi@0,54280000 { + status = "okay"; + + vdd-supply = <&vdd_3v3_hdmi>; + pll-supply = <&vdd_hdmi_pll>; + hdmi-supply = <&vdd_5v0_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + + sor@0,54540000 { + status = "okay"; + + nvidia,dpaux = <&dpaux>; + nvidia,panel = <&panel>; + }; + + dpaux@0,545c0000 { + vdd-supply = <&vdd_3v3_panel>; + status = "okay"; + }; + }; + + pinmux@0,70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_default>; + + pinmux_default: common { + dap_mclk1_pw4 { + nvidia,pins = "dap_mclk1_pw4"; + nvidia,function = "extperiph1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5", + "dap2_fs_pa2", + "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0", + "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_nxt_py2", + "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pg4 { + nvidia,pins = "pg4", + "pg5", + "pg6", + "pi3"; + nvidia,function = "spi4"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pg7 { + nvidia,pins = "pg7"; + nvidia,function = "spi4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ph1 { + nvidia,pins = "ph1"; + nvidia,function = "pwm1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pk0 { + nvidia,pins = "pk0", + "kb_row15_ps7", + "clk_32k_out_pa0"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "kb_col4_pq4", + "sdmmc3_clk_lb_out_pee4", + "sdmmc3_clk_lb_in_pee5", + "sdmmc3_cd_n_pv2"; + nvidia,function = "sdmmc3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "rtck"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5", + "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_ENABLE>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4", + "usb_vbus_en1_pn5"; + nvidia,function = "usb"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + drive_sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <36>; + nvidia,pull-up-strength = <20>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>; + }; + drive_sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <22>; + nvidia,pull-up-strength = <36>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + }; + drive_gma { + nvidia,pins = "drive_gma"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <2>; + nvidia,pull-up-strength = <1>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,drive-type = <1>; + }; + codec_irq_l { + nvidia,pins = "ph4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_bl_en { + nvidia,pins = "ph2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + touch_irq_l { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + tpm_davint_l { + nvidia,pins = "ph6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ts_irq_l { + nvidia,pins = "pk2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ts_reset_l { + nvidia,pins = "pk4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ts_shdn_l { + nvidia,pins = "pk1"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph7 { + nvidia,pins = "ph7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col0_ap { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lid_open { + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + en_vdd_sd { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ac_ok { + nvidia,pins = "pj0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sensor_irq_l { + nvidia,pins = "pi6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + wifi_en { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + en_vdd_bl { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + en_vdd_hdmi { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + soc_warm_reset_l { + nvidia,pins = "pi5"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + hp_det_l { + nvidia,pins = "pi7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + mic_det_l { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + }; + }; + + serial@0,70006000 { + /* Debug connector on the bottom of the board near SD card. */ + status = "okay"; + }; + + pwm@0,7000a000 { + status = "okay"; + }; + + i2c@0,7000c000 { + status = "okay"; + clock-frequency = <100000>; + + acodec: audio-codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + }; + + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + + #thermal-sensor-cells = <1>; + }; + }; + + i2c@0,7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000c500 { + status = "okay"; + clock-frequency = <400000>; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + }; + }; + + hdmi_ddc: i2c@0,7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: pmic@40 { + compatible = "ams,as3722"; + reg = <0x40>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + + ams,system-power-controller; + + #interrupt-cells = <2>; + interrupt-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&as3722_default>; + + as3722_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + bias-pull-down; + }; + + gpio1 { + pins = "gpio1"; + function = "gpio"; + bias-pull-up; + }; + + gpio2_4_7 { + pins = "gpio2", "gpio4", "gpio7"; + function = "gpio"; + bias-pull-up; + }; + + gpio3_6 { + pins = "gpio3", "gpio6"; + bias-high-impedance; + }; + + gpio5 { + pins = "gpio5"; + function = "clk32k-out"; + bias-pull-down; + }; + }; + + regulators { + vsup-sd2-supply = <&vdd_5v0_sys>; + vsup-sd3-supply = <&vdd_5v0_sys>; + vsup-sd4-supply = <&vdd_5v0_sys>; + vsup-sd5-supply = <&vdd_5v0_sys>; + vin-ldo0-supply = <&vdd_1v35_lp0>; + vin-ldo1-6-supply = <&vdd_3v3_run>; + vin-ldo2-5-7-supply = <&vddio_1v8>; + vin-ldo3-4-supply = <&vdd_3v3_sys>; + vin-ldo9-10-supply = <&vdd_5v0_sys>; + vin-ldo11-supply = <&vdd_3v3_run>; + + sd0 { + regulator-name = "+VDD_CPU_AP"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <2>; + }; + + sd1 { + regulator-name = "+VDD_CORE"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <2500000>; + regulator-max-microamp = <4000000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <1>; + }; + + vdd_1v35_lp0: sd2 { + regulator-name = "+1.35V_LP0(sd2)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + sd3 { + regulator-name = "+1.35V_LP0(sd3)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v05_run: sd4 { + regulator-name = "+1.05V_RUN"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + vddio_1v8: sd5 { + regulator-name = "+1.8V_VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + sd6 { + regulator-name = "+VDD_GPU_AP"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo0 { + regulator-name = "+1.05V_RUN_AVDD"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + ams,ext-control = <1>; + }; + + ldo1 { + regulator-name = "+1.8V_RUN_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2 { + regulator-name = "+1.2V_GEN_AVDD"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3 { + regulator-name = "+1.00V_LP0_VDD_RTC"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + ams,enable-tracking; + }; + + vdd_run_cam: ldo4 { + regulator-name = "+3.3V_RUN_CAM"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo5 { + regulator-name = "+1.2V_RUN_CAM_FRONT"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vddio_sdmmc3: ldo6 { + regulator-name = "+VDDIO_SDMMC3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-name = "+1.05V_RUN_CAM_REAR"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo9 { + regulator-name = "+2.8V_RUN_TOUCH"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10 { + regulator-name = "+2.8V_RUN_CAM_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo11 { + regulator-name = "+1.8V_RUN_VPP_FUSE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; + + spi@0,7000d400 { + status = "okay"; + + cros_ec: cros-ec@0 { + compatible = "google,cros-ec-spi"; + spi-max-frequency = <3000000>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>; + reg = <0>; + + google,cros-ec-spi-msg-delay = <2000>; + + i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + #address-cells = <1>; + #size-cells = <0>; + + google,remote-bus = <0>; + + charger: bq24735@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(J, 0) + GPIO_ACTIVE_HIGH>; + ti,ac-detect-gpios = <&gpio + TEGRA_GPIO(J, 0) + GPIO_ACTIVE_HIGH>; + }; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <10>; + power-supplies = <&charger>; + }; + }; + }; + }; + + spi@0,7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + + flash@0 { + compatible = "winbond,w25q32dw"; + reg = <0>; + }; + }; + + pmc@0,7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <500>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <61036>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + hda@0,70030000 { + status = "okay"; + }; + + sdhci@0,700b0000 { /* WiFi/BT on this bus */ + status = "okay"; + power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + no-1-8-v; + non-removable; + }; + + sdhci@0,700b0400 { /* SD Card on this bus */ + status = "okay"; + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; + bus-width = <4>; + no-1-8-v; + vqmmc-supply = <&vddio_sdmmc3>; + }; + + sdhci@0,700b0600 { /* eMMC on this bus */ + status = "okay"; + bus-width = <8>; + no-1-8-v; + non-removable; + }; + + ahub@0,70300000 { + i2s@0,70301100 { + status = "okay"; + }; + }; + + usb@0,7d000000 { /* Rear external USB port. */ + status = "okay"; + }; + + usb-phy@0,7d000000 { + status = "okay"; + vbus-supply = <&vdd_usb1_vbus>; + }; + + usb@0,7d004000 { /* Internal webcam. */ + status = "okay"; + }; + + usb-phy@0,7d004000 { + status = "okay"; + vbus-supply = <&vdd_run_cam>; + }; + + usb@0,7d008000 { /* Left external USB port. */ + status = "okay"; + }; + + usb-phy@0,7d008000 { + status = "okay"; + vbus-supply = <&vdd_usb3_vbus>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_led>; + pwms = <&pwm 1 1000000>; + + default-brightness-level = <224>; + brightness-levels = + < 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255 + 256>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + lid { + label = "Lid"; + gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>; + linux,input-type = <5>; + linux,code = <KEY_RESERVED>; + debounce-interval = <1>; + gpio-key,wakeup; + }; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <30>; + gpio-key,wakeup; + }; + }; + + panel: panel { + compatible = "auo,b133xtn01"; + + backlight = <&backlight>; + ddc-i2c-bus = <&dpaux>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_mux: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "+VDD_MUX"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "+5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "+3.3V_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_run: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "+3.3V_RUN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_3v3_hdmi: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_run>; + }; + + vdd_led: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "+VDD_LED"; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_mux>; + }; + + vdd_5v0_ts: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "+5V_VDD_TS_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb1_vbus: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "+5V_USB_HS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb3_vbus: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "+5V_USB_SS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_3v3_panel: regulator@9 { + compatible = "regulator-fixed"; + reg = <9>; + regulator-name = "+3.3V_PANEL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pmic 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_run>; + }; + + vdd_3v3_lp0: regulator@10 { + compatible = "regulator-fixed"; + reg = <10>; + regulator-name = "+3.3V_LP0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* + * TODO: find a way to wire this up with the USB EHCI + * controllers so that it can be enabled on demand. + */ + regulator-always-on; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_hdmi_pll: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; + + vdd_5v0_hdmi: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + }; + + sound { + compatible = "nvidia,tegra-audio-max98090-nyan-big", + "nvidia,tegra-audio-max98090"; + nvidia,model = "Acer Chromebook 13"; + + nvidia,audio-routing = + "Headphones", "HPR", + "Headphones", "HPL", + "Speakers", "SPKR", + "Speakers", "SPKL", + "Mic Jack", "MICBIAS", + "DMICL", "Int Mic", + "DMICR", "Int Mic", + "IN34", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&acodec>; + + clocks = <&tegra_car TEGRA124_CLK_PLL_A>, + <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>; + }; +}; + +#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 70ad91d1a20b..13008858e967 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -36,17 +36,17 @@ nvidia,panel = <&panel>; }; - dpaux: dpaux@0,545c0000 { + dpaux@0,545c0000 { vdd-supply = <&vdd_3v3_panel>; status = "okay"; }; }; pinmux: pinmux@0,70000868 { - pinctrl-names = "default"; - pinctrl-0 = <&pinmux_default>; + pinctrl-names = "boot"; + pinctrl-0 = <&pinmux_boot>; - pinmux_default: common { + pinmux_boot: common { dap_mclk1_pw4 { nvidia,pins = "dap_mclk1_pw4"; nvidia,function = "extperiph1"; @@ -587,7 +587,7 @@ status = "okay"; }; - pwm: pwm@0,7000a000 { + pwm@0,7000a000 { status = "okay"; }; @@ -606,6 +606,14 @@ i2c@0,7000c400 { status = "okay"; clock-frequency = <100000>; + + trackpad@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>; + linux,gpio-keymap = <0 0 0 BTN_LEFT>; + }; }; i2c@0,7000c500 { diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 03916efd6fa9..478c555ebd96 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -12,6 +12,72 @@ #address-cells = <2>; #size-cells = <2>; + pcie-controller@0,01003000 { + compatible = "nvidia,tegra124-pcie"; + device_type = "pci"; + reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ + 0x0 0x01003800 0x0 0x00000800 /* AFI registers */ + 0x0 0x02000000 0x0 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */ + 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */ + 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */ + 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ + + clocks = <&tegra_car TEGRA124_CLK_PCIE>, + <&tegra_car TEGRA124_CLK_AFI>, + <&tegra_car TEGRA124_CLK_PLL_E>, + <&tegra_car TEGRA124_CLK_CML0>; + clock-names = "pex", "afi", "pll_e", "cml"; + resets = <&tegra_car 70>, + <&tegra_car 72>, + <&tegra_car 74>; + reset-names = "pex", "afi", "pcie_x"; + status = "disabled"; + + phys = <&padctl TEGRA_XUSB_PADCTL_PCIE>; + phy-names = "pcie"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + }; + host1x@0,50000000 { compatible = "nvidia,tegra124-host1x", "simple-bus"; reg = <0x0 0x50000000 0x0 0x00034000>; @@ -78,7 +144,7 @@ status = "disabled"; }; - dpaux@0,545c0000 { + dpaux: dpaux@0,545c0000 { compatible = "nvidia,tegra124-dpaux"; reg = <0x0 0x545c0000 0x0 0x00040000>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; @@ -137,6 +203,11 @@ #reset-cells = <1>; }; + flow-controller@0,60007000 { + compatible = "nvidia,tegra124-flowctrl"; + reg = <0x0 0x60007000 0x0 0x1000>; + }; + gpio: gpio@0,6000d000 { compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio"; reg = <0x0 0x6000d000 0x0 0x1000>; @@ -267,7 +338,7 @@ status = "disabled"; }; - pwm@0,7000a000 { + pwm: pwm@0,7000a000 { compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm"; reg = <0x0 0x7000a000 0x0 0x100>; #pwm-cells = <2>; @@ -480,6 +551,31 @@ reset-names = "fuse"; }; + sata@0,70020000 { + compatible = "nvidia,tegra124-ahci"; + + reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */ + <0x0 0x70020000 0x0 0x7000>; /* SATA */ + + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&tegra_car TEGRA124_CLK_SATA>, + <&tegra_car TEGRA124_CLK_SATA_OOB>, + <&tegra_car TEGRA124_CLK_CML1>, + <&tegra_car TEGRA124_CLK_PLL_E>; + clock-names = "sata", "sata-oob", "cml1", "pll_e"; + + resets = <&tegra_car 124>, + <&tegra_car 123>, + <&tegra_car 129>; + reset-names = "sata", "sata-oob", "sata-cold"; + + phys = <&padctl TEGRA_XUSB_PADCTL_SATA>; + phy-names = "sata-phy"; + + status = "disabled"; + }; + hda@0,70030000 { compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda"; reg = <0x0 0x70030000 0x0 0x10000>; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 1908f6937e53..3b374c49d04d 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -190,6 +190,11 @@ #reset-cells = <1>; }; + flow-controller@60007000 { + compatible = "nvidia,tegra20-flowctrl"; + reg = <0x60007000 0x1000>; + }; + apbdma: dma@6000a000 { compatible = "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1200>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 6b35c29278d7..aa6ccea13d30 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -272,6 +272,11 @@ #reset-cells = <1>; }; + flow-controller@60007000 { + compatible = "nvidia,tegra30-flowctrl"; + reg = <0x60007000 0x1000>; + }; + apbdma: dma@6000a000 { compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1400>; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 756c986995a3..2efb2058ba49 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -41,7 +41,7 @@ bank-width = <4>; }; - vram@2,00000000 { + v2m_video_ram: vram@2,00000000 { compatible = "arm,vexpress-vram"; reg = <2 0x00000000 0x00800000>; }; @@ -246,9 +246,41 @@ clcd@1f0000 { compatible = "arm,pl111", "arm,primecell"; reg = <0x1f0000 0x1000>; + interrupt-names = "combined"; interrupts = <14>; clocks = <&v2m_oscclk1>, <&smbclk>; clock-names = "clcdclk", "apb_pclk"; + memory-region = <&v2m_video_ram>; + max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */ + + port { + v2m_clcd_pads: endpoint { + remote-endpoint = <&v2m_clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + v2m_clcd_panel: endpoint { + remote-endpoint = <&v2m_clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <40>; + hfront-porch = <24>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <2>; + }; + }; }; }; @@ -350,7 +382,7 @@ /* CLCD clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; - freq-range = <23750000 63500000>; + freq-range = <23750000 65000000>; #clock-cells = <0>; clock-output-names = "v2m:oscclk1"; }; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index ba856d604fb7..cb3090f919a7 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -40,7 +40,7 @@ bank-width = <4>; }; - vram@3,00000000 { + v2m_video_ram: vram@3,00000000 { compatible = "arm,vexpress-vram"; reg = <3 0x00000000 0x00800000>; }; @@ -245,9 +245,41 @@ clcd@1f000 { compatible = "arm,pl111", "arm,primecell"; reg = <0x1f000 0x1000>; + interrupt-names = "combined"; interrupts = <14>; clocks = <&v2m_oscclk1>, <&smbclk>; clock-names = "clcdclk", "apb_pclk"; + memory-region = <&v2m_video_ram>; + max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */ + + port { + v2m_clcd_pads: endpoint { + remote-endpoint = <&v2m_clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + v2m_clcd_panel: endpoint { + remote-endpoint = <&v2m_clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <40>; + hfront-porch = <24>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <2>; + }; + }; }; }; @@ -349,7 +381,7 @@ /* CLCD clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; - freq-range = <23750000 63500000>; + freq-range = <23750000 65000000>; #clock-cells = <0>; clock-output-names = "v2m:oscclk1"; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 62d9b225dcce..23662b5a5e9d 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -70,9 +70,40 @@ clcd@10020000 { compatible = "arm,pl111", "arm,primecell"; reg = <0x10020000 0x1000>; + interrupt-names = "combined"; interrupts = <0 44 4>; clocks = <&oscclk1>, <&oscclk2>; clock-names = "clcdclk", "apb_pclk"; + max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ + + port { + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <63500127>; + hactive = <1024>; + hback-porch = <152>; + hfront-porch = <48>; + hsync-len = <104>; + vactive = <768>; + vback-porch = <23>; + vfront-porch = <3>; + vsync-len = <4>; + }; + }; }; memory-controller@100e0000 { diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts new file mode 100644 index 000000000000..7fb306679341 --- /dev/null +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts @@ -0,0 +1,46 @@ +/* + * Copyright 2014 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; +#include "vf610-colibri.dtsi" + +/ { + model = "Toradex Colibri VF61 on Colibri Evaluation Board"; + compatible = "toradex,vf610-colibri_vf61-on-eval", "toradex,vf610-colibri_vf61", "fsl,vf610"; + + chosen { + bootargs = "console=ttyLP0,115200"; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf610-colibri.dts b/arch/arm/boot/dts/vf610-colibri.dtsi index aecc7dbc65e8..0cd83434b073 100644 --- a/arch/arm/boot/dts/vf610-colibri.dts +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -7,16 +7,11 @@ * (at your option) any later version. */ -/dts-v1/; #include "vf610.dtsi" / { model = "Toradex Colibri VF61 COM"; - compatible = "toradex,vf610-colibri", "fsl,vf610"; - - chosen { - bootargs = "console=ttyLP0,115200"; - }; + compatible = "toradex,vf610-colibri_vf61", "fsl,vf610"; memory { reg = <0x80000000 0x10000000>; @@ -36,14 +31,12 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; - status = "okay"; }; &fec1 { phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; - status = "okay"; }; &L2 { @@ -54,25 +47,32 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; - status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; +}; + +&usbdev0 { + disable-over-current; + status = "okay"; +}; + +&usbh1 { + disable-over-current; status = "okay"; }; &iomuxc { vf610-colibri { pinctrl_esdhc1: esdhc1grp { - fsl,fsl,pins = < + fsl,pins = < VF610_PAD_PTA24__ESDHC1_CLK 0x31ef VF610_PAD_PTA25__ESDHC1_CMD 0x31ef VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index e4bffbae515f..189b6975fe7d 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -220,8 +220,6 @@ VF610_PAD_PTB1__FTM0_CH1 0x1582 VF610_PAD_PTB2__FTM0_CH2 0x1582 VF610_PAD_PTB3__FTM0_CH3 0x1582 - VF610_PAD_PTB6__FTM0_CH6 0x1582 - VF610_PAD_PTB7__FTM0_CH7 0x1582 >; }; @@ -243,6 +241,13 @@ VF610_PAD_PTB5__UART1_RX 0x21a1 >; }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTB6__UART2_TX 0x21a2 + VF610_PAD_PTB7__UART2_RX 0x21a1 + >; + }; }; }; @@ -264,3 +269,19 @@ pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbdev0 { + disable-over-current; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 583dd363c9dc..4d2ec32de96f 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -27,6 +27,8 @@ gpio2 = &gpio3; gpio3 = &gpio4; gpio4 = &gpio5; + usbphy0 = &usbphy0; + usbphy1 = &usbphy1; }; cpus { @@ -297,9 +299,25 @@ gpio-ranges = <&iomuxc 0 128 7>; }; - anatop@40050000 { - compatible = "fsl,vf610-anatop"; - reg = <0x40050000 0x1000>; + anatop: anatop@40050000 { + compatible = "fsl,vf610-anatop", "syscon"; + reg = <0x40050000 0x400>; + }; + + usbphy0: usbphy@40050800 { + compatible = "fsl,vf610-usbphy"; + reg = <0x40050800 0x400>; + interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_USBPHY0>; + fsl,anatop = <&anatop>; + }; + + usbphy1: usbphy@40050c00 { + compatible = "fsl,vf610-usbphy"; + reg = <0x40050c00 0x400>; + interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_USBPHY1>; + fsl,anatop = <&anatop>; }; i2c0: i2c@40066000 { @@ -321,6 +339,24 @@ reg = <0x4006b000 0x1000>; #clock-cells = <1>; }; + + usbdev0: usb@40034000 { + compatible = "fsl,vf610-usb", "fsl,imx27-usb"; + reg = <0x40034000 0x800>; + interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_USBC0>; + fsl,usbphy = <&usbphy0>; + fsl,usbmisc = <&usbmisc0 0>; + dr_mode = "peripheral"; + status = "disabled"; + }; + + usbmisc0: usb@40034800 { + #index-cells = <1>; + compatible = "fsl,vf610-usbmisc"; + reg = <0x40034800 0x200>; + clocks = <&clks VF610_CLK_USBC0>; + }; }; aips1: aips-bus@40080000 { @@ -383,6 +419,24 @@ status = "disabled"; }; + usbh1: usb@400b4000 { + compatible = "fsl,vf610-usb", "fsl,imx27-usb"; + reg = <0x400b4000 0x800>; + interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_USBC1>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc1 0>; + dr_mode = "host"; + status = "disabled"; + }; + + usbmisc1: usb@400b4800 { + #index-cells = <1>; + compatible = "fsl,vf610-usbmisc"; + reg = <0x400b4800 0x200>; + clocks = <&clks VF610_CLK_USBC1>; + }; + ftm: ftm@400b8000 { compatible = "fsl,ftm-timer"; reg = <0x400b8000 0x1000 0x400b9000 0x1000>; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 587cadcf7001..24036c440440 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -200,6 +200,8 @@ interrupts = <0 22 4>; clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; clock-names = "pclk", "hclk", "tx_clk"; + #address-cells = <1>; + #size-cells = <0>; }; gem1: ethernet@e000c000 { @@ -209,6 +211,8 @@ interrupts = <0 45 4>; clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>; clock-names = "pclk", "hclk", "tx_clk"; + #address-cells = <1>; + #size-cells = <0>; }; sdhci0: sdhci@e0100000 { @@ -219,7 +223,7 @@ interrupt-parent = <&intc>; interrupts = <0 24 4>; reg = <0xe0100000 0x1000>; - } ; + }; sdhci1: sdhci@e0101000 { compatible = "arasan,sdhci-8.9a"; @@ -229,7 +233,7 @@ interrupt-parent = <&intc>; interrupts = <0 47 4>; reg = <0xe0101000 0x1000>; - } ; + }; slcr: slcr@f8000000 { #address-cells = <1>; @@ -261,6 +265,8 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0xf8003000 0x1000>; interrupt-parent = <&intc>; + interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3", + "dma4", "dma5", "dma6", "dma7"; interrupts = <0 13 4>, <0 14 4>, <0 15 4>, <0 16 4>, <0 17 4>, @@ -276,7 +282,7 @@ devcfg: devcfg@f8007000 { compatible = "xlnx,zynq-devcfg-1.0"; reg = <0xf8007000 0x100>; - } ; + }; global_timer: timer@f8f00200 { compatible = "arm,cortex-a9-global-timer"; @@ -308,6 +314,6 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xf8f00600 0x20>; clocks = <&clkc 4>; - } ; + }; }; }; diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index 41afd9da6876..e1f51ca127fe 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -25,7 +25,7 @@ memory { device_type = "memory"; - reg = <0 0x40000000>; + reg = <0x0 0x40000000>; }; chosen { @@ -38,8 +38,6 @@ status = "okay"; phy-mode = "rgmii-id"; phy-handle = <ðernet_phy>; - #address-cells = <1>; - #size-cells = <0>; ethernet_phy: ethernet-phy@0 { /* Marvell 88E1318 */ @@ -53,6 +51,29 @@ &i2c0 { status = "okay"; + + isl9305: isl9305@68 { + compatible = "isl,isl9305"; + reg = <0x68>; + + regulators { + dcd1 { + regulator-name = "VDD_DSP"; + regulator-always-on; + }; + dcd2 { + regulator-name = "1P35V"; + regulator-always-on; + }; + ldo1 { + regulator-name = "VDD_ADJ"; + }; + ldo2 { + regulator-name = "VDD_GPIO"; + regulator-always-on; + }; + }; + }; }; &sdhci1 { diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 835c3089c61c..94e2cda6f9b6 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -1,5 +1,5 @@ /* - * Copyright (C) 2011 Xilinx + * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. * * This software is licensed under the terms of the GNU General Public @@ -27,6 +27,15 @@ bootargs = "console=ttyPS0,115200 earlyprintk"; }; + leds { + compatible = "gpio-leds"; + + ds23 { + label = "ds23"; + gpios = <&gpio0 10 0>; + linux,default-trigger = "heartbeat"; + }; + }; }; &can0 { @@ -35,7 +44,12 @@ &gem0 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + }; }; &i2c0 { diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 4cc9913078cd..a8bbdfbc7093 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -1,7 +1,6 @@ /* - * Copyright (C) 2011 Xilinx + * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. - * Copyright (C) 2013 Xilinx * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -21,7 +20,7 @@ memory { device_type = "memory"; - reg = <0 0x40000000>; + reg = <0x0 0x40000000>; }; chosen { @@ -32,7 +31,12 @@ &gem0 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + }; }; &i2c0 { diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index 82d7ef1a9a9c..697779a353ed 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -1,7 +1,6 @@ /* - * Copyright (C) 2011 Xilinx + * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. - * Copyright (C) 2013 Xilinx * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -17,11 +16,11 @@ / { model = "Zynq Zed Development Board"; - compatible = "xlnx,zynq-7000"; + compatible = "xlnx,zynq-zed", "xlnx,zynq-7000"; memory { device_type = "memory"; - reg = <0 0x20000000>; + reg = <0x0 0x20000000>; }; chosen { @@ -32,7 +31,12 @@ &gem0 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0>; + }; }; &sdhci0 { |