Merge tag 'imx-dt-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

i.MX device tree updates for 4.12:
 - New board support: I2SE's i.MX28 Duckbill-2 boards, Gateworks Ventana
   i.MX6 GW5903/GW5904, Zodiac Inflight Innovations RDU2 board, Engicam
   i.CoreM6 Quad/Dual OpenFrame modules, Boundary Device i.MX6 Quad Plus
   SOM.
 - Improve compatible string for i.MX50 eSDHC, i.MX7S SRC devices and
   i.MX6SX UART device.
 - Add interrupts for switch and PHY devices on VF610 ZII Devel C board.
 - Add LVDS, LCD backlight, touchscreen and SAI2 support for i.MX6
   icore, geam, and isiot boards.
 - A series from Lucas Stach to improve i.MX6Q Plus device tree and add
   PRE/PRG devices.
 - A series from Stefan Agner to update imx7-colibri device tree
   regarding to display, PMIC/regulator support.
 - Fix PCI bus DTC warnings seen with the latest compiler.
 - Set default phy_type and dr_mode for i.MX25 USBOTG port.
 - A couple of small improvements on i.MX25 pin function DT header.
 - Add audio support for imx6q-cm-fx6 board using Wolfson wm8731 codec
   which is muxed to SSI2 device.
 - Other random updates, small fixes and trivial cleanups.

* tag 'imx-dt-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (56 commits)
  ARM: dts: imx6q-utilite-pro: add hpd gpio
  ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
  ARM: dts: imx6qdl-sabresd: Set LDO regulator supply
  ARM: dts: imx: add Gateworks Ventana GW5903 support
  ARM: dts: i.MX25: add AIPS control registers
  ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators
  ARM: dts: imx7-colibri: remove 1.8V fixed regulator
  ARM: dts: imx7-colibri: allow to disable Ethernet rail
  ARM: dts: imx7-colibri: fix PMIC voltages
  ARM: dts: imx7-colibri: use OF graph to describe the display
  ARM: dts: imx6qp-nitrogen6_som2: add Quad Plus variant of the SOM
  ARM: dts: imx6q-icore: Add touchscreen node
  ARM: dts: vf610-zii-dev-rev-b: change switch2 label
  ARM: dts: imx6ul-[geam|isiot]: Add sai2 node
  ARM: dts: imx6ul-isiot-common: Add touchscreen node
  ARM: dts: imx6ul-isiot: Add i2c nodes
  ARM: dts: imx6ul-isiot: Add imx6ul-isiot-common.dtsi
  ARM: dts: imx6ul-isiot: Add backlight support for lcdif
  ARM: dts: imx6ul-geam: Add backlight support for lcdif
  ARM: dts: imx6: add ZII RDU2 boards
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 77 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index 6a45bd24ffe6..db3b408ea55a 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -67,11 +67,17 @@
 
 			switch0: switch@0 {
 				compatible = "marvell,mv88e6190";
+				pinctrl-0 = <&pinctrl_gpio_switch0>;
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0>;
 				dsa,member = <0 0>;
 				eeprom-length = <512>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 
 				ports {
 					#address-cells = <1>;
@@ -91,21 +97,25 @@
 					port@1 {
 						reg = <1>;
 						label = "lan1";
+						phy-handle = <&switch0phy1>;
 					};
 
 					port@2 {
 						reg = <2>;
 						label = "lan2";
+						phy-handle = <&switch0phy2>;
 					};
 
 					port@3 {
 						reg = <3>;
 						label = "lan3";
+						phy-handle = <&switch0phy3>;
 					};
 
 					port@4 {
 						reg = <4>;
 						label = "lan4";
+						phy-handle = <&switch0phy4>;
 					};
 
 					switch0port10: port@10 {
@@ -115,6 +125,35 @@
 						link = <&switch1port10>;
 					};
 				};
+
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					switch0phy1: switch0phy@1 {
+						reg = <1>;
+						interrupt-parent = <&switch0>;
+						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch0phy2: switch0phy@2 {
+						reg = <2>;
+						interrupt-parent = <&switch0>;
+						interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch0phy3: switch0phy@3 {
+						reg = <3>;
+						interrupt-parent = <&switch0>;
+						interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch0phy4: switch0phy@4 {
+						reg = <4>;
+						interrupt-parent = <&switch0>;
+						interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+					};
+				};
 			};
 		};
 
@@ -125,11 +164,17 @@
 
 			switch1: switch@0 {
 				compatible = "marvell,mv88e6190";
+				pinctrl-0 = <&pinctrl_gpio_switch1>;
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0>;
 				dsa,member = <0 1>;
 				eeprom-length = <512>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 
 				ports {
 					#address-cells = <1>;
@@ -138,21 +183,25 @@
 					port@1 {
 						reg = <1>;
 						label = "lan5";
+						phy-handle = <&switch1phy1>;
 					};
 
 					port@2 {
 						reg = <2>;
 						label = "lan6";
+						phy-handle = <&switch1phy2>;
 					};
 
 					port@3 {
 						reg = <3>;
 						label = "lan7";
+						phy-handle = <&switch1phy3>;
 					};
 
 					port@4 {
 						reg = <4>;
 						label = "lan8";
+						phy-handle = <&switch1phy4>;
 					};
 
 
@@ -163,6 +212,34 @@
 						link = <&switch0port10>;
 					};
 				};
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					switch1phy1: switch1phy@1 {
+						reg = <1>;
+						interrupt-parent = <&switch1>;
+						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy2: switch1phy@2 {
+						reg = <2>;
+						interrupt-parent = <&switch1>;
+						interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy3: switch1phy@3 {
+						reg = <3>;
+						interrupt-parent = <&switch1>;
+						interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy4: switch1phy@4 {
+						reg = <4>;
+						interrupt-parent = <&switch1>;
+						interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+					};
+				};
 			};
 		};