Merge tag 'sunxi-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Pull "Allwinner DT Additions for 3.18" from Maxime Ripard:

Mostly:
  - A23 bringup ongoing
  - New boards: HSG H702, Merrii A20 Hummingbird
  - sun(4|5|7)i DMA support
  - DT relicensing to a dual GPL/X11 license

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'sunxi-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (30 commits)
  ARM: dts: sun8i: Add DMA controller node
  ARM: dts: sun5i: Add DT for HSG H702 tablet board
  ARM: dts: sunxi: Add fixed 5V regulator
  ARM: sun8i: Relicense the A23 DTSI under GPLv2/X11
  ARM: sun7i: Relicense the A20 DTSI under GPLv2/X11
  ARM: sun6i: Relicense the A31 DTSI under GPLv2/X11
  ARM: sun7i: Add support for Olimex A20-OLinuXino-LIME
  ARM: dts: sun7i: Add Merrii A20 Hummingbird board
  ARM: dts: sun7i: Add uart3/4/5, i2c3 and spi2 pinmux
  ARM: dt: sunxi: Remove i2c controller clock-frequency that matches default
  ARM: dts: sun8i: Enable i2c controllers on ippo-q8h-v5
  ARM: dts: sun8i: Add i2c controller nodes
  ARM: dts: sun8i: Add pin-muxing info for the i2c controllers
  ARM: dts: sun8i: Enable mmc controller on ippo-q8h-v5
  ARM: dts: sun8i: Add mmc controller nodes
  ARM: dts: sun8i: Add pin-muxing info for the mmc controllers
  ARM: dts: sun8i: Add mmc clocks to the dtsi
  ARM: dts: sun8i: ippo-q8h: Add pinctrl properties for R_UART
  ARM: dts: sun8i: Add pin muxing option for R_UART
  ARM: dts: sun8i: Add pinmux set for uart0
  ...

1 files changed, 47 insertions, 9 deletions

diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index e06fbfc55bb7..543f895d18d3 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -3,12 +3,48 @@
  *
  * Maxime Ripard <maxime.ripard@free-electrons.com>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /include/ "skeleton.dtsi"
@@ -657,7 +693,6 @@
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <0 6 4>;
 			clocks = <&apb2_gates 0>;
-			clock-frequency = <100000>;
 			resets = <&apb2_rst 0>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -669,7 +704,6 @@
 			reg = <0x01c2b000 0x400>;
 			interrupts = <0 7 4>;
 			clocks = <&apb2_gates 1>;
-			clock-frequency = <100000>;
 			resets = <&apb2_rst 1>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -681,7 +715,6 @@
 			reg = <0x01c2b400 0x400>;
 			interrupts = <0 8 4>;
 			clocks = <&apb2_gates 2>;
-			clock-frequency = <100000>;
 			resets = <&apb2_rst 2>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -693,7 +726,6 @@
 			reg = <0x01c2b800 0x400>;
 			interrupts = <0 9 4>;
 			clocks = <&apb2_gates 3>;
-			clock-frequency = <100000>;
 			resets = <&apb2_rst 3>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -787,6 +819,12 @@
 			interrupts = <1 9 0xf04>;
 		};
 
+		rtc: rtc@01f00000 {
+			compatible = "allwinner,sun6i-a31-rtc";
+			reg = <0x01f00000 0x54>;
+			interrupts = <0 40 4>, <0 41 4>;
+		};
+
 		nmi_intc: interrupt-controller@01f00c0c {
 			compatible = "allwinner,sun6i-a31-sc-nmi";
 			interrupt-controller;