Merge tag 'omap-for-v4.15/fixes-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "non-urgent device tree fixes for omaps for v4.15 merge window"
from Tony Lindgren

Non-urgent device tree fixes for omaps that can all wait for v4.15
merge window.

Turns out that we have many devices working just because we have
the legacy platform data still around. This is mostly an issue
for omap4, other SoCs just have minimal fixes needed.

As many of the missing device tree nodes and properties are for
devices that have no drivers in the mainline kernel, such as
slimbus, iss, mcasp, aess, fdif and gpu, we might as well start
using the new "ti,sysc" interconnect target module binding for
them so we can get the devices with no child device drivers idled.

This also makes it possible to drop unnecessary platform data
in later patches.

* tag 'omap-for-v4.15/fixes-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Fix typo for omap4 mcasp rx path
  ARM: dts: Configure SmartReflex only to idle the interconnect target module
  ARM: dts: Add nodes for missing omap4 interconnect target modules
  dt-bindings: bus: Minimal TI sysc interconnect target module binding
  ARM: dts: Add missing hwmod related properties for dra7
  ARM: dts: Add missing hwmod related nodes for am33xx
  ARM: dts: Add missing dma hwmod property for omap5
  ARM: dts: Add missing wdt3 node for omap4
  ARM: dts: Add missing hsi node for omap4
  ARM: dts: Add missing onewire node for omap4
  ARM: dts: Add missing smartreflex node and binding for omap4
  ARM: dts: Add missing hwmods property for omap4 dma
  ARM: dts: Add missing properties for omap4 control modules
  ARM: dts: Configure pmu without interrupt for omap4430
  ARM: dts: Add missing dma hwmods property for omap3

5 files changed, 156 insertions, 5 deletions

diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
index 3a4e5901ce31..ce8dabf8c0f9 100644
--- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt
+++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
@@ -21,6 +21,8 @@ Required properties:
 		"ti,omap3-scm"
 		"ti,omap4-scm-core"
 		"ti,omap4-scm-padconf-core"
+		"ti,omap4-scm-wkup"
+		"ti,omap4-scm-padconf-wkup"
 		"ti,omap5-scm-core"
 		"ti,omap5-scm-padconf-core"
 		"ti,dra7-scm-core"
diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt
new file mode 100644
index 000000000000..fb1790e39398
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt
@@ -0,0 +1,93 @@
+Texas Instruments sysc interconnect target module wrapper binding
+
+Texas Instruments SoCs can have a generic interconnect target module
+hardware for devices connected to various interconnects such as L3
+interconnect (Arteris NoC) and L4 interconnect (Sonics s3220). The sysc
+is mostly used for interaction between module and PRCM. It participates
+in the OCP Disconnect Protocol but other than that is mostly independent
+of the interconnect.
+
+Each interconnect target module can have one or more devices connected to
+it. There is a set of control registers for managing interconnect target
+module clocks, idle modes and interconnect level resets for the module.
+
+These control registers are sprinkled into the unused register address
+space of the first child device IP block managed by the interconnect
+target module and typically are named REVISION, SYSCONFIG and SYSSTATUS.
+
+Required standard properties:
+
+- compatible	shall be one of the following generic types:
+
+		"ti,sysc-omap2"
+		"ti,sysc-omap4"
+		"ti,sysc-omap4-simple"
+
+		or one of the following derivative types for hardware
+		needing special workarounds:
+
+		"ti,sysc-omap3430-sr"
+		"ti,sysc-omap3630-sr"
+		"ti,sysc-omap4-sr"
+		"ti,sysc-omap3-sham"
+		"ti,sysc-omap-aes"
+		"ti,sysc-mcasp"
+		"ti,sysc-usb-host-fs"
+
+- reg		shall have register areas implemented for the interconnect
+		target module in question such as revision, sysc and syss
+
+- reg-names	shall contain the register names implemented for the
+		interconnect target module in question such as
+		"rev, "sysc", and "syss"
+
+- ranges	shall contain the interconnect target module IO range
+		available for one or more child device IP blocks managed
+		by the interconnect target module, the ranges may include
+		multiple ranges such as device L4 range for control and
+		parent L3 range for DMA access
+
+Optional properties:
+
+- clocks	clock specifier for each name in the clock-names as
+		specified in the binding documentation for ti-clkctrl,
+		typically available for all interconnect targets on TI SoCs
+		based on omap4 except if it's read-only register in hwauto
+		mode as for example omap4 L4_CFG_CLKCTRL
+
+- clock-names	should contain at least "fck", and optionally also "ick"
+		depending on the SoC and the interconnect target module
+
+- ti,hwmods	optional TI interconnect module name to use legacy
+		hwmod platform data
+
+
+Example: Single instance of MUSB controller on omap4 using interconnect ranges
+using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
+
+	target-module@2b000 {		/* 0x4a0ab000, ap 84 12.0 */
+		compatible = "ti,sysc-omap2";
+		ti,hwmods = "usb_otg_hs";
+		reg = <0x2b400 0x4>,
+		      <0x2b404 0x4>,
+		      <0x2b408 0x4>;
+		reg-names = "rev", "sysc", "syss";
+		clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x2b000 0x1000>;
+
+		usb_otg_hs: otg@0 {
+			compatible = "ti,omap4-musb";
+			reg = <0x0 0x7ff>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			usb-phy = <&usb2_phy>;
+			...
+		};
+	};
+
+Note that other SoCs, such as am335x can have multipe child devices. On am335x
+there are two MUSB instances, two USB PHY instances, and a single CPPI41 DMA
+instance as children of a single interconnet target module.
diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt
index b8eca3c7810d..955e335e7e56 100644
--- a/Documentation/devicetree/bindings/hsi/omap-ssi.txt
+++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt
@@ -1,10 +1,12 @@
 OMAP SSI controller bindings
 
-OMAP Synchronous Serial Interface (SSI) controller implements a legacy
-variant of MIPI's High Speed Synchronous Serial Interface (HSI).
+OMAP3's Synchronous Serial Interface (SSI) controller implements a
+legacy variant of MIPI's High Speed Synchronous Serial Interface (HSI),
+while the controller found inside OMAP4 is supposed to be fully compliant
+with the HSI standard.
 
 Required properties:
-- compatible:		Should include "ti,omap3-ssi".
+- compatible:		Should include "ti,omap3-ssi" or "ti,omap4-hsi"
 - reg-names:		Contains the values "sys" and "gdd" (in this order).
 - reg:			Contains a matching register specifier for each entry
 			in reg-names.
@@ -27,6 +29,7 @@ Each port is represented as a sub-node of the ti,omap3-ssi device.
 Required Port sub-node properties:
 - compatible:		Should be set to the following value
 			ti,omap3-ssi-port (applicable to OMAP34xx devices)
+			ti,omap4-hsi-port (applicable to OMAP44xx devices)
 - reg-names:		Contains the values "tx" and "rx" (in this order).
 - reg:			Contains a matching register specifier for each entry
 			in reg-names.
@@ -38,6 +41,10 @@ Required Port sub-node properties:
 			property. If it's missing the port will not be
 			enabled.
 
+Optional properties:
+- ti,hwmods:		Shall contain TI interconnect module name if needed
+			by the SoC
+
 Example for Nokia N900:
 
 ssi-controller@48058000 {
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
index 0db60470ebb6..fd823d6091b2 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
@@ -7,8 +7,10 @@ of the EMIF IP and memory parts attached to it.
 
 Required properties:
 - compatible	: Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
-  is the IP revision of the specific EMIF instance.
-		  For am437x should be ti,emif-am4372.
+  is the IP revision of the specific EMIF instance. For newer controllers,
+  compatible should be one of the following:
+  	     "ti,emif-am3352"
+	     "ti,emif-am4372"
 
 - phy-type	: <u32> indicating the DDR phy type. Following are the
   allowed values
diff --git a/Documentation/devicetree/bindings/power/ti-smartreflex.txt b/Documentation/devicetree/bindings/power/ti-smartreflex.txt
new file mode 100644
index 000000000000..9780957c9115
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/ti-smartreflex.txt
@@ -0,0 +1,47 @@
+Texas Instruments SmartReflex binding
+
+SmartReflex is used to set and adjust the SoC operating points.
+
+
+Required properties:
+
+compatible: Shall be one of the following:
+	    "ti,omap3-smartreflex-core"
+	    "ti,omap3-smartreflex-iva"
+	    "ti,omap4-smartreflex-core"
+	    "ti,omap4-smartreflex-mpu"
+	    "ti,omap4-smartreflex-iva"
+
+reg: Shall contain the device instance IO range
+
+interrupts: Shall contain the device instance interrupt
+
+
+Optional properties:
+
+ti,hwmods: Shall contain the TI interconnect module name if needed
+	   by the SoC
+
+
+Example:
+
+	smartreflex_iva: smartreflex@4a0db000 {
+		compatible = "ti,omap4-smartreflex-iva";
+		reg = <0x4a0db000 0x80>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "smartreflex_iva";
+	};
+
+	smartreflex_core: smartreflex@4a0dd000 {
+		compatible = "ti,omap4-smartreflex-core";
+		reg = <0x4a0dd000 0x80>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "smartreflex_core";
+	};
+
+	smartreflex_mpu: smartreflex@4a0d9000 {
+		compatible = "ti,omap4-smartreflex-mpu";
+		reg = <0x4a0d9000 0x80>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "smartreflex_mpu";
+	};