Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This time we have a good set of changes to the core framework that do
  some general cleanups, but nothing too major. The majority of the diff
  goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is
  introduced for Actions Semi so it takes up some lines to add all the
  different types, and the Qualcomm diff is there because we add support
  for two SoCs and it's quite a bit of data.

  Otherwise the big driver updates are on TI Davinci and Amlogic
  platforms. And then the long tail of driver updates for various fixes
  and stuff follows after that.

  Core:
   - debugfs cleanups removing error checking and an unused provider API
   - Removal of a clk init typedef that isn't used
   - Usage of match_string() to simplify parent string name matching
   - OF clk helpers moved to their own file (linux/of_clk.h)
   - Make clk warnings more readable across kernel versions

  New Drivers:
   - Qualcomm SDM845 GCC and Video clk controllers
   - Qualcomm MSM8998 GCC
   - Actions Semi S900 SoC support
   - Nuvoton npcm750 microcontroller clks
   - Amlogic axg AO clock controller

  Removed Drivers:
   - Deprecated Rockchip clk-gate driver

  Updates:
   - debugfs functions stopped checking return values
   - Support for the MSIOF module clocks on Rensas R-Car M3-N
   - Support for the new Rensas RZ/G1C and R-Car E3 SoCs
   - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs
   - Berlin and Amlogic SPDX tagging
   - Usage of of_clk_get_parent_count() in more places
   - Proper implementation of the CDEV1/2 clocks on Tegra20
   - Allwinner H6 PRCM clock support and R40 EMAC support
   - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet
   - Round closest support for meson's mpll driver
   - Support for meson8b nand clocks and gxbb video decoder clocks
   - Mediatek mali clks
   - STM32MP1 fixes
   - Uniphier LD11/LD20 stream demux system clock"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits)
  clk: qcom: Export clk_fabia_pll_configure()
  clk: bcm: Update and add Stingray clock entries
  dt-bindings: clk: Update Stingray binding doc
  clk-si544: Properly round requested frequency to nearest match
  clk: ingenic: jz4770: Add 150us delay after enabling VPU clock
  clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock
  clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle
  clk: ingenic: jz4770: Change OTG from custom to standard gated clock
  clk: ingenic: Support specifying "wait for clock stable" delay
  clk: ingenic: Add support for clocks whose gate bit is inverted
  clk: use match_string() helper
  clk: bcm2835: use match_string() helper
  clk: Return void from debug_init op
  clk: remove clk_debugfs_add_file()
  clk: tegra: no need to check return value of debugfs_create functions
  clk: davinci: no need to check return value of debugfs_create functions
  clk: bcm2835: no need to check return value of debugfs_create functions
  clk: no need to check return value of debugfs_create functions
  clk: imx6: add EPIT clock support
  clk: mvebu: use correct bit for 98DX3236 NAND
  ...

12 files changed, 245 insertions, 94 deletions

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt
new file mode 100644
index 000000000000..7de43bf41fdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt
@@ -0,0 +1,30 @@
+MediaTek g3dsys controller
+============================
+
+The MediaTek g3dsys controller provides various clocks and reset controller to
+the GPU.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt2701-g3dsys", "syscon":
+		for MT2701 SoC
+	- "mediatek,mt7623-g3dsys", "mediatek,mt2701-g3dsys", "syscon":
+		for MT7623 SoC
+- #clock-cells: Must be 1
+- #reset-cells: Must be 1
+
+The g3dsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+g3dsys: clock-controller@13000000 {
+	compatible = "mediatek,mt7623-g3dsys",
+		     "mediatek,mt2701-g3dsys",
+		     "syscon";
+	reg = <0 0x13000000 0 0x200>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/actions,s900-cmu.txt b/Documentation/devicetree/bindings/clock/actions,s900-cmu.txt
new file mode 100644
index 000000000000..93e4fb827cd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/actions,s900-cmu.txt
@@ -0,0 +1,47 @@
+* Actions S900 Clock Management Unit (CMU)
+
+The Actions S900 clock management unit generates and supplies clock to various
+controllers within the SoC. The clock binding described here is applicable to
+S900 SoC.
+
+Required Properties:
+
+- compatible: should be "actions,s900-cmu"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- clocks: Reference to the parent clocks ("hosc", "losc")
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier, and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/actions,s900-cmu.h header and can be used in device
+tree sources.
+
+External clocks:
+
+The hosc clock used as input for the plls is generated outside the SoC. It is
+expected that it is defined using standard clock bindings as "hosc".
+
+Actions S900 CMU also requires one more clock:
+ - "losc" - internal low frequency oscillator
+
+Example: Clock Management Unit node:
+
+        cmu: clock-controller@e0160000 {
+                compatible = "actions,s900-cmu";
+                reg = <0x0 0xe0160000 0x0 0x1000>;
+                clocks = <&hosc>, <&losc>;
+                #clock-cells = <1>;
+        };
+
+Example: UART controller node that consumes clock generated by the clock
+management unit:
+
+        uart: serial@e012a000 {
+                compatible = "actions,s900-uart", "actions,owl-uart";
+                reg = <0x0 0xe012a000 0x0 0x2000>;
+                interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cmu CLK_UART5>;
+        };
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
index 786dc39ca904..3a880528030e 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
@@ -9,6 +9,7 @@ Required Properties:
 	- GXBB (S905) : "amlogic,meson-gxbb-aoclkc"
 	- GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc"
 	- GXM (S912) : "amlogic,meson-gxm-aoclkc"
+	- AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc"
 	followed by the common "amlogic,meson-gx-aoclkc"
 
 - #clock-cells: should be 1.
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
index f8e4a93466cb..ab730ea0a560 100644
--- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
@@ -276,36 +276,38 @@ These clock IDs are defined in:
     clk_ts_500_ref	genpll2		2	BCM_SR_GENPLL2_TS_500_REF_CLK
     clk_125_nitro	genpll2		3	BCM_SR_GENPLL2_125_NITRO_CLK
     clk_chimp		genpll2		4	BCM_SR_GENPLL2_CHIMP_CLK
-    clk_nic_flash	genpll2		5	BCM_SR_GENPLL2_NIC_FLASH
+    clk_nic_flash	genpll2		5	BCM_SR_GENPLL2_NIC_FLASH_CLK
+    clk_fs		genpll2		6	BCM_SR_GENPLL2_FS_CLK
 
     genpll3		crystal		0	BCM_SR_GENPLL3
     clk_hsls		genpll3		1	BCM_SR_GENPLL3_HSLS_CLK
     clk_sdio		genpll3		2	BCM_SR_GENPLL3_SDIO_CLK
 
     genpll4		crystal		0	BCM_SR_GENPLL4
-    ccn			genpll4		1	BCM_SR_GENPLL4_CCN_CLK
+    clk_ccn		genpll4		1	BCM_SR_GENPLL4_CCN_CLK
     clk_tpiu_pll	genpll4		2	BCM_SR_GENPLL4_TPIU_PLL_CLK
-    noc_clk		genpll4		3	BCM_SR_GENPLL4_NOC_CLK
+    clk_noc		genpll4		3	BCM_SR_GENPLL4_NOC_CLK
     clk_chclk_fs4	genpll4		4	BCM_SR_GENPLL4_CHCLK_FS4_CLK
     clk_bridge_fscpu	genpll4		5	BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK
 
-
     genpll5		crystal		0	BCM_SR_GENPLL5
-    fs4_hf_clk		genpll5		1	BCM_SR_GENPLL5_FS4_HF_CLK
-    crypto_ae_clk	genpll5		2	BCM_SR_GENPLL5_CRYPTO_AE_CLK
-    raid_ae_clk		genpll5		3	BCM_SR_GENPLL5_RAID_AE_CLK
+    clk_fs4_hf		genpll5		1	BCM_SR_GENPLL5_FS4_HF_CLK
+    clk_crypto_ae	genpll5		2	BCM_SR_GENPLL5_CRYPTO_AE_CLK
+    clk_raid_ae		genpll5		3	BCM_SR_GENPLL5_RAID_AE_CLK
 
     genpll6		crystal		0	BCM_SR_GENPLL6
-    48_usb		genpll6		1	BCM_SR_GENPLL6_48_USB_CLK
+    clk_48_usb		genpll6		1	BCM_SR_GENPLL6_48_USB_CLK
 
     lcpll0		crystal		0	BCM_SR_LCPLL0
     clk_sata_refp 	lcpll0		1	BCM_SR_LCPLL0_SATA_REFP_CLK
     clk_sata_refn	lcpll0		2	BCM_SR_LCPLL0_SATA_REFN_CLK
-    clk_usb_ref		lcpll0		3	BCM_SR_LCPLL0_USB_REF_CLK
-    sata_refpn		lcpll0		3	BCM_SR_LCPLL0_SATA_REFPN_CLK
+    clk_sata_350	lcpll0		3	BCM_SR_LCPLL0_SATA_350_CLK
+    clk_sata_500	lcpll0		4	BCM_SR_LCPLL0_SATA_500_CLK
 
     lcpll1		crystal		0	BCM_SR_LCPLL1
-    wan 		lcpll1		1	BCM_SR_LCPLL0_WAN_CLK
+    clk_wan		lcpll1		1	BCM_SR_LCPLL1_WAN_CLK
+    clk_usb_ref		lcpll1		2	BCM_SR_LCPLL1_USB_REF_CLK
+    clk_crmu_ts		lcpll1		3	BCM_SR_LCPLL1_CRMU_TS_CLK
 
     lcpll_pcie		crystal		0	BCM_SR_LCPLL_PCIE
-    pcie_phy_ref 	lcpll1		1	BCM_SR_LCPLL_PCIE_PHY_REF_CLK
+    clk_pcie_phy_ref	lcpll1		1	BCM_SR_LCPLL_PCIE_PHY_REF_CLK
diff --git a/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt b/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt
new file mode 100644
index 000000000000..f82064546d11
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt
@@ -0,0 +1,100 @@
+* Nuvoton NPCM7XX Clock Controller
+
+Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which
+generates and supplies clocks to all modules within the BMC.
+
+External clocks:
+
+There are six fixed clocks that are generated outside the BMC. All clocks are of
+a known fixed value that cannot be changed. clk_refclk, clk_mcbypck and
+clk_sysbypck are inputs to the clock controller.
+clk_rg1refck, clk_rg2refck and clk_xin are external clocks suppling the
+network. They are set on the device tree, but not used by the clock module. The
+network devices use them directly.
+Example can be found below.
+
+All available clocks are defined as preprocessor macros in:
+dt-bindings/clock/nuvoton,npcm7xx-clock.h
+and can be reused as DT sources.
+
+Required Properties of clock controller:
+
+	- compatible: "nuvoton,npcm750-clk" : for clock controller of Nuvoton
+		  Poleg BMC NPCM750
+
+	- reg: physical base address of the clock controller and length of
+		memory mapped region.
+
+	- #clock-cells: should be 1.
+
+Example: Clock controller node:
+
+	clk: clock-controller@f0801000 {
+		compatible = "nuvoton,npcm750-clk";
+		#clock-cells = <1>;
+		reg = <0xf0801000 0x1000>;
+		clock-names = "refclk", "sysbypck", "mcbypck";
+		clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
+	};
+
+Example: Required external clocks for network:
+
+	/* external reference clock */
+	clk_refclk: clk-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "refclk";
+	};
+
+	/* external reference clock for cpu. float in normal operation */
+	clk_sysbypck: clk-sysbypck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <800000000>;
+		clock-output-names = "sysbypck";
+	};
+
+	/* external reference clock for MC. float in normal operation */
+	clk_mcbypck: clk-mcbypck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <800000000>;
+		clock-output-names = "mcbypck";
+	};
+
+	 /* external clock signal rg1refck, supplied by the phy */
+	clk_rg1refck: clk-rg1refck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "clk_rg1refck";
+	};
+
+	 /* external clock signal rg2refck, supplied by the phy */
+	clk_rg2refck: clk-rg2refck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "clk_rg2refck";
+	};
+
+	clk_xin: clk-xin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "clk_xin";
+	};
+
+
+Example: GMAC controller node that consumes two clocks: a generated clk by the
+clock controller and a fixed clock from DT (clk_rg1refck).
+
+	ethernet0: ethernet@f0802000 {
+		compatible = "snps,dwmac";
+		reg = <0xf0802000 0x2000>;
+		interrupts = <0 14 4>;
+		interrupt-names = "macirq";
+		clocks	= <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
+		clock-names = "stmmaceth", "clk_gmac";
+	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
index 551d03be9665..664ea1fd6c76 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -17,7 +17,9 @@ Required properties :
 			"qcom,gcc-msm8974pro-ac"
 			"qcom,gcc-msm8994"
 			"qcom,gcc-msm8996"
+			"qcom,gcc-msm8998"
 			"qcom,gcc-mdm9615"
+			"qcom,gcc-sdm845"
 
 - reg : shall contain base register location and length
 - #clock-cells : shall contain 1
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmh-clk.txt b/Documentation/devicetree/bindings/clock/qcom,rpmh-clk.txt
new file mode 100644
index 000000000000..3c007653da31
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmh-clk.txt
@@ -0,0 +1,22 @@
+Qualcomm Technologies, Inc. RPMh Clocks
+-------------------------------------------------------
+
+Resource Power Manager Hardened (RPMh) manages shared resources on
+some Qualcomm Technologies Inc. SoCs. It accepts clock requests from
+other hardware subsystems via RSC to control clocks.
+
+Required properties :
+- compatible : shall contain "qcom,sdm845-rpmh-clk"
+
+- #clock-cells : must contain 1
+
+Example :
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+
+	&apps_rsc {
+		rpmhcc: clock-controller {
+			compatible = "qcom,sdm845-rpmh-clk";
+			#clock-cells = <1>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.txt b/Documentation/devicetree/bindings/clock/qcom,videocc.txt
new file mode 100644
index 000000000000..e7c035afa778
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.txt
@@ -0,0 +1,19 @@
+Qualcomm Video Clock & Reset Controller Binding
+-----------------------------------------------
+
+Required properties :
+- compatible : shall contain "qcom,sdm845-videocc"
+- reg : shall contain base register location and length
+- #clock-cells : from common clock binding, shall contain 1.
+- #power-domain-cells : from generic power domain binding, shall contain 1.
+
+Optional properties :
+- #reset-cells : from common reset binding, shall contain 1.
+
+Example:
+	videocc: clock-controller@ab00000 {
+		compatible = "qcom,sdm845-videocc";
+		reg = <0xab00000 0x10000>;
+		#clock-cells = <1>;
+		#power-domain-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
index 773a5226342f..db542abadb75 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
@@ -15,6 +15,7 @@ Required Properties:
   - compatible: Must be one of:
       - "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M)
       - "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E)
+      - "renesas,r8a77470-cpg-mssr" for the r8a77470 SoC (RZ/G1C)
       - "renesas,r8a7790-cpg-mssr" for the r8a7790 SoC (R-Car H2)
       - "renesas,r8a7791-cpg-mssr" for the r8a7791 SoC (R-Car M2-W)
       - "renesas,r8a7792-cpg-mssr" for the r8a7792 SoC (R-Car V2H)
@@ -25,6 +26,7 @@ Required Properties:
       - "renesas,r8a77965-cpg-mssr" for the r8a77965 SoC (R-Car M3-N)
       - "renesas,r8a77970-cpg-mssr" for the r8a77970 SoC (R-Car V3M)
       - "renesas,r8a77980-cpg-mssr" for the r8a77980 SoC (R-Car V3H)
+      - "renesas,r8a77990-cpg-mssr" for the r8a77990 SoC (R-Car E3)
       - "renesas,r8a77995-cpg-mssr" for the r8a77995 SoC (R-Car D3)
 
   - reg: Base address and length of the memory resource used by the CPG/MSSR
@@ -33,10 +35,12 @@ Required Properties:
   - clocks: References to external parent clocks, one entry for each entry in
     clock-names
   - clock-names: List of external parent clock names. Valid names are:
-      - "extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7792, r8a7793, r8a7794,
-		 r8a7795, r8a7796, r8a77965, r8a77970, r8a77980, r8a77995)
+      - "extal" (r8a7743, r8a7745, r8a77470, r8a7790, r8a7791, r8a7792,
+		 r8a7793, r8a7794, r8a7795, r8a7796, r8a77965, r8a77970,
+		 r8a77980, r8a77990, r8a77995)
       - "extalr" (r8a7795, r8a7796, r8a77965, r8a77970, r8a77980)
-      - "usb_extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7793, r8a7794)
+      - "usb_extal" (r8a7743, r8a7745, r8a77470, r8a7790, r8a7791, r8a7793,
+		     r8a7794)
 
   - #clock-cells: Must be 2
       - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
diff --git a/Documentation/devicetree/bindings/clock/rockchip.txt b/Documentation/devicetree/bindings/clock/rockchip.txt
deleted file mode 100644
index 22f6769e5d4a..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-Device Tree Clock bindings for arch-rockchip
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-== Gate clocks ==
-
-These bindings are deprecated!
-Please use the soc specific CRU bindings instead.
-
-The gate registers form a continuos block which makes the dt node
-structure a matter of taste, as either all gates can be put into
-one gate clock spanning all registers or they can be divided into
-the 10 individual gates containing 16 clocks each.
-The code supports both approaches.
-
-Required properties:
-- compatible : "rockchip,rk2928-gate-clk"
-- reg : shall be the control register address(es) for the clock.
-- #clock-cells : from common clock binding; shall be set to 1
-- clock-output-names : the corresponding gate names that the clock controls
-- clocks : should contain the parent clock for each individual gate,
-  therefore the number of clocks elements should match the number of
-  clock-output-names
-
-Example using multiple gate clocks:
-
-		clk_gates0: gate-clk@200000d0 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000d0 0x4>;
-			clocks = <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>;
-
-			clock-output-names =
-				"gate_core_periph", "gate_cpu_gpll",
-				"gate_ddrphy", "gate_aclk_cpu",
-				"gate_hclk_cpu", "gate_pclk_cpu",
-				"gate_atclk_cpu", "gate_i2s0",
-				"gate_i2s0_frac", "gate_i2s1",
-				"gate_i2s1_frac", "gate_i2s2",
-				"gate_i2s2_frac", "gate_spdif",
-				"gate_spdif_frac", "gate_testclk";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates1: gate-clk@200000d4 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000d4 0x4>;
-			clocks = <&xin24m>, <&xin24m>,
-				 <&xin24m>, <&dummy>,
-				 <&dummy>, <&xin24m>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>;
-
-			clock-output-names =
-				"gate_timer0", "gate_timer1",
-				"gate_timer2", "gate_jtag",
-				"gate_aclk_lcdc1_src", "gate_otgphy0",
-				"gate_otgphy1", "gate_ddr_gpll",
-				"gate_uart0", "gate_frac_uart0",
-				"gate_uart1", "gate_frac_uart1",
-				"gate_uart2", "gate_frac_uart2",
-				"gate_uart3", "gate_frac_uart3";
-
-			#clock-cells = <1>;
-		};
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index 460ef27b1008..47d2e902ced4 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -21,6 +21,7 @@ Required properties :
 		- "allwinner,sun50i-a64-r-ccu"
 		- "allwinner,sun50i-h5-ccu"
 		- "allwinner,sun50i-h6-ccu"
+		- "allwinner,sun50i-h6-r-ccu"
 		- "nextthing,gr8-ccu"
 
 - reg: Must contain the registers base address and length
@@ -35,7 +36,7 @@ Required properties :
 For the main CCU on H6, one more clock is needed:
 - "iosc": the SoC's internal frequency oscillator
 
-For the PRCM CCUs on A83T/H3/A64, two more clocks are needed:
+For the PRCM CCUs on A83T/H3/A64/H6, two more clocks are needed:
 - "pll-periph": the SoC's peripheral PLL from the main CCU
 - "iosc": the SoC's internal frequency oscillator
 
diff --git a/Documentation/driver-api/clk.rst b/Documentation/driver-api/clk.rst
index 511628bb3d3a..593cca5058b1 100644
--- a/Documentation/driver-api/clk.rst
+++ b/Documentation/driver-api/clk.rst
@@ -96,7 +96,7 @@ the operations defined in clk-provider.h::
 		int		(*get_phase)(struct clk_hw *hw);
 		int		(*set_phase)(struct clk_hw *hw, int degrees);
 		void		(*init)(struct clk_hw *hw);
-		int		(*debug_init)(struct clk_hw *hw,
+		void		(*debug_init)(struct clk_hw *hw,
 					      struct dentry *dentry);
 	};