Merge tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - add ASPM L1 substate support

 - enable PCIe Extended Tags when supported

 - configure PCIe MPS settings on iProc, Versatile, X-Gene, and Xilinx

 - increase VPD access timeout

 - add ACS quirks for Intel Union Point, Qualcomm QDF2400 and QDF2432

 - use new pci_irq_alloc_vectors() in more drivers

 - fix MSI affinity memory leak

 - remove unused MSI interfaces and update documentation

 - remove unused AER .link_reset() callback

 - avoid pci_lock / p->pi_lock deadlock seen with perf

 - serialize sysfs enable/disable num_vfs operations

 - move DesignWare IP from drivers/pci/host/ to drivers/pci/dwc/ and
   refactor so we can support both hosts and endpoints

 - add DT ECAM-like support for HiSilicon Hip06/Hip07 controllers

 - add Rockchip system power management support

 - add Thunder-X cn81xx and cn83xx support

 - add Exynos 5440 PCIe PHY support

* tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (93 commits)
  PCI: dwc: Remove dependency of designware on CONFIG_PCI
  PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host
  PCI: dwc: Split pcie-designware.c into host and core files
  PCI: dwc: designware: Fix style errors in pcie-designware.c
  PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc()
  PCI: dwc: all: Split struct pcie_port into host-only and core structures
  PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init()
  PCI: dwc: all: Rename cfg_read/cfg_write to read/write
  PCI: dwc: all: Use platform_set_drvdata() to save private data
  PCI: dwc: designware: Move register defines to designware header file
  PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code
  PCI: dra7xx: Group PHY API invocations
  PCI: dra7xx: Enable MSI and legacy interrupts simultaneously
  PCI: dra7xx: Add support to force RC to work in GEN1 mode
  PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional()
  PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory
  PCI: exynos: Support the PHY generic framework
  Documentation: binding: Modify the exynos5440 PCIe binding
  phy: phy-exynos-pcie: Add support for Exynos PCIe PHY
  Documentation: samsung-phy: Add exynos-pcie-phy binding
  ...

6 files changed, 88 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
index 59c2f47aa303..b7fa3b97986d 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
@@ -42,3 +42,40 @@ Hip05 Example (note that Hip06 is the same except compatible):
 				 0x0 0 0 4 &mbigen_pcie 4 13>;
 		status = "ok";
 	};
+
+HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
+The properties and their meanings are identical to those described in
+host-generic-pci.txt except as listed below.
+
+Properties of the host controller node that differ from
+host-generic-pci.txt:
+
+- compatible     : Must be "hisilicon,pcie-almost-ecam"
+
+- reg            : Two entries: First the ECAM configuration space for any
+		   other bus underneath the root bus. Second, the base
+		   and size of the HiSilicon host bridge registers include
+		   the RC's own config space.
+
+Example:
+	pcie0: pcie@a0090000 {
+		compatible = "hisilicon,pcie-almost-ecam";
+		reg = <0 0xb0000000 0 0x2000000>,  /*  ECAM configuration space */
+		      <0 0xa0090000 0 0x10000>; /* host bridge registers */
+		bus-range = <0  31>;
+		msi-map = <0x0000 &its_dsa 0x0000 0x2000>;
+		msi-map-mask = <0xffff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		dma-coherent;
+		ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 0x5ff0000
+			  0x01000000 0 0 0 0xb7ff0000 0 0x10000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4
+				 0x0 0 0 2 &mbigen_pcie0 650 4
+				 0x0 0 0 3 &mbigen_pcie0 650 4
+				 0x0 0 0 4 &mbigen_pcie0 650 4>;
+		status = "ok";
+	};
diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
index 08c716b2c6b6..2de6f65ecfb1 100644
--- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt
+++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
@@ -78,7 +78,8 @@ and the following optional properties:
   multiple lanes. If this property is not found, we assume that the
   value is 0.
 - reset-gpios: optional gpio to PERST#
-- reset-delay-us: delay in us to wait after reset de-assertion
+- reset-delay-us: delay in us to wait after reset de-assertion, if not
+  specified will default to 100ms, as required by the PCIe specification.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index eee518db90b9..34712d6fd253 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -6,6 +6,7 @@ compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
 	    "renesas,pcie-r8a7791" for the R8A7791 SoC;
 	    "renesas,pcie-r8a7793" for the R8A7793 SoC;
 	    "renesas,pcie-r8a7795" for the R8A7795 SoC;
+	    "renesas,pcie-r8a7796" for the R8A7796 SoC;
 	    "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device.
 	    "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 compatible device.
 
diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
index 71aeda1ca055..1453a734c2f5 100644
--- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
@@ -43,6 +43,8 @@ Required properties:
 - interrupt-map-mask and interrupt-map: standard PCI properties
 
 Optional Property:
+- aspm-no-l0s: RC won't support ASPM L0s. This property is needed if
+	using 24MHz OSC for RC's PHY.
 - ep-gpios: contain the entry for pre-reset gpio
 - num-lanes: number of lanes to use
 - vpcie3v3-supply: The phandle to the 3.3v regulator to use for PCIe.
diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt
index 4f9d23d2ed67..7d3b09474657 100644
--- a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt
@@ -7,8 +7,19 @@ Required properties:
 - compatible: "samsung,exynos5440-pcie"
 - reg: base addresses and lengths of the pcie controller,
 	the phy controller, additional register for the phy controller.
+	(Registers for the phy controller are DEPRECATED.
+	 Use the PHY framework.)
+- reg-names : First name should be set to "elbi".
+	And use the "config" instead of getting the confgiruation address space
+	from "ranges".
+	NOTE: When use the "config" property, reg-names must be set.
 - interrupts: A list of interrupt outputs for level interrupt,
 	pulse interrupt, special interrupt.
+- phys: From PHY binding. Phandle for the Generic PHY.
+	Refer to Documentation/devicetree/bindings/phy/samsung-phy.txt
+
+Other common properties refer to
+	Documentation/devicetree/binding/pci/designware-pcie.txt
 
 Example:
 
@@ -54,6 +65,24 @@ SoC specific DT Entry:
 		num-lanes = <4>;
 	};
 
+With using PHY framework:
+	pcie_phy0: pcie-phy@270000 {
+		...
+		reg = <0x270000 0x1000>, <0x271000 0x40>;
+		reg-names = "phy", "block";
+		...
+	};
+
+	pcie@290000 {
+		...
+		reg = <0x290000 0x1000>, <0x40000000 0x1000>;
+		reg-names = "elbi", "config";
+		phys = <&pcie_phy0>;
+		ranges = <0x81000000 0 0	  0x60001000 0 0x00010000
+			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>;
+		...
+	};
+
 Board specific DT Entry:
 
 	pcie@290000 {
diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
index 9872ba8546bd..ab80bfe31cb3 100644
--- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
+++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
@@ -191,3 +191,20 @@ Example:
 		usbdrdphy0 = &usb3_phy0;
 		usbdrdphy1 = &usb3_phy1;
 	};
+
+Samsung Exynos SoC series PCIe PHY controller
+--------------------------------------------------
+Required properties:
+- compatible : Should be set to "samsung,exynos5440-pcie-phy"
+- #phy-cells : Must be zero
+- reg : a register used by phy driver.
+	- First is for phy register, second is for block register.
+- reg-names : Must be set to "phy" and "block".
+
+Example:
+	pcie_phy0: pcie-phy@270000 {
+		#phy-cells = <0>;
+		compatible = "samsung,exynos5440-pcie-phy";
+		reg = <0x270000 0x1000>, <0x271000 0x40>;
+		reg-names = "phy", "block";
+	};