summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-06-05 05:56:20 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2020-06-05 05:56:20 +0300
commit828f3e18e1cb98c68fc6db4d5113513d4a267775 (patch)
treee1d813f2122dee697e896166917d58f46dff82c5 /Documentation/devicetree/bindings
parent298743c193bb50b5d65b9285eb7206ffb31d412d (diff)
parentb5f73d47f34b238221ac771b5fe4907df621d7cb (diff)
downloadlinux-828f3e18e1cb98c68fc6db4d5113513d4a267775.tar.xz
Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM/SoC driver updates from Arnd Bergmann: "These are updates to SoC specific drivers that did not have another subsystem maintainer tree to go through for some reason: - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC that is getting added through the MIPS tree. - There are new soc_device identification drivers for TI K3, Qualcomm MSM8939 - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and Hisilicon hi6220 - The SCMI firmware interface can now work across ARM SMC/HVC as a transport. - Mediatek platforms now use a new driver for their "MMSYS" hardware block that controls clocks and some other aspects in behalf of the media and gpu drivers. - Some Tegra processors have improved power management support, including getting woken up by the PMIC and cluster power down during idle. - A new v4l staging driver for Tegra is added. - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and Tegra" * tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits) clk: sprd: fix compile-testing bus: bt1-axi: Build the driver into the kernel bus: bt1-apb: Build the driver into the kernel bus: bt1-axi: Use sysfs_streq instead of strncmp bus: bt1-axi: Optimize the return points in the driver bus: bt1-apb: Use sysfs_streq instead of strncmp bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method bus: bt1-apb: Fix show/store callback identations bus: bt1-apb: Include linux/io.h dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding memory: Add Baikal-T1 L2-cache Control Block driver bus: Add Baikal-T1 APB-bus driver bus: Add Baikal-T1 AXI-bus driver dt-bindings: bus: Add Baikal-T1 APB-bus binding dt-bindings: bus: Add Baikal-T1 AXI-bus binding staging: tegra-video: fix V4L2 dependency tee: fix crypto select drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static soc: ti: add k3 platforms chipid module driver dt-bindings: soc: ti: add binding for k3 platforms chipid module ...
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r--Documentation/devicetree/bindings/arm/arm,scmi.txt3
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt7
-rw-r--r--Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml90
-rw-r--r--Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml107
-rw-r--r--Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt56
-rw-r--r--Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt73
-rw-r--r--Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt6
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/baikal,bt1-l2-ctl.yaml63
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml82
-rw-r--r--Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml102
-rw-r--r--Documentation/devicetree/bindings/power/qcom,rpmpd.yaml1
-rw-r--r--Documentation/devicetree/bindings/reset/fsl,imx7-src.txt6
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt1
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt20
-rw-r--r--Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml40
15 files changed, 614 insertions, 43 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt
index dc102c4e4a78..1f293ea24cd8 100644
--- a/Documentation/devicetree/bindings/arm/arm,scmi.txt
+++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt
@@ -14,7 +14,7 @@ Required properties:
The scmi node with the following properties shall be under the /firmware/ node.
-- compatible : shall be "arm,scmi"
+- compatible : shall be "arm,scmi" or "arm,scmi-smc" for smc/hvc transports
- mboxes: List of phandle and mailbox channel specifiers. It should contain
exactly one or two mailboxes, one for transmitting messages("tx")
and another optional for receiving the notifications("rx") if
@@ -25,6 +25,7 @@ The scmi node with the following properties shall be under the /firmware/ node.
protocol identifier for a given sub-node.
- #size-cells : should be '0' as 'reg' property doesn't have any size
associated with it.
+- arm,smc-id : SMC id required when using smc or hvc transports
Optional properties:
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
index 301eefbe1618..8d6a9d98e7a6 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
@@ -1,7 +1,8 @@
Mediatek mmsys controller
============================
-The Mediatek mmsys controller provides various clocks to the system.
+The Mediatek mmsys system controller provides clock control, routing control,
+and miscellaneous control in mmsys partition.
Required Properties:
@@ -15,13 +16,13 @@ Required Properties:
- "mediatek,mt8183-mmsys", "syscon"
- #clock-cells: Must be 1
-The mmsys controller uses the common clk binding from
+For the clock control, the mmsys controller uses the common clk binding from
Documentation/devicetree/bindings/clock/clock-bindings.txt
The available clocks are defined in dt-bindings/clock/mt*-clk.h.
Example:
-mmsys: clock-controller@14000000 {
+mmsys: syscon@14000000 {
compatible = "mediatek,mt8173-mmsys", "syscon";
reg = <0 0x14000000 0 0x1000>;
#clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml
new file mode 100644
index 000000000000..d6a3b71ea835
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/baikal,bt1-apb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 APB-bus
+
+maintainers:
+ - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+ Baikal-T1 CPU or DMAC MMIO requests are handled by the AMBA 3 AXI Interconnect
+ which routes them to the AXI-APB bridge. This interface is a single master
+ multiple slaves bus in turn serializing IO accesses and routing them to the
+ addressed APB slave devices. In case of any APB protocol collisions, slave
+ device not responding on timeout an IRQ is raised with an erroneous address
+ reported to the APB terminator (APB Errors Handler Block).
+
+allOf:
+ - $ref: /schemas/simple-bus.yaml#
+
+properties:
+ compatible:
+ contains:
+ const: baikal,bt1-apb
+
+ reg:
+ items:
+ - description: APB EHB MMIO registers
+ - description: APB MMIO region with no any device mapped
+
+ reg-names:
+ items:
+ - const: ehb
+ - const: nodev
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: APB reference clock
+
+ clock-names:
+ items:
+ - const: pclk
+
+ resets:
+ items:
+ - description: APB domain reset line
+
+ reset-names:
+ items:
+ - const: prst
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+ bus@1f059000 {
+ compatible = "baikal,bt1-apb", "simple-bus";
+ reg = <0 0x1f059000 0 0x1000>,
+ <0 0x1d000000 0 0x2040000>;
+ reg-names = "ehb", "nodev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges;
+
+ interrupts = <GIC_SHARED 16 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&ccu_sys 1>;
+ clock-names = "pclk";
+
+ resets = <&ccu_sys 1>;
+ reset-names = "prst";
+ };
+...
diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
new file mode 100644
index 000000000000..203bc0e5346b
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/baikal,bt1-axi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 AXI-bus
+
+maintainers:
+ - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+ AXI3-bus is the main communication bus of Baikal-T1 SoC connecting all
+ high-speed peripheral IP-cores with RAM controller and with MIPS P5600
+ cores. Traffic arbitration is done by means of DW AXI Interconnect (so
+ called AXI Main Interconnect) routing IO requests from one block to
+ another: from CPU to SoC peripherals and between some SoC peripherals
+ (mostly between peripheral devices and RAM, but also between DMA and
+ some peripherals). In case of any protocol error, device not responding
+ an IRQ is raised and a faulty situation is reported to the AXI EHB
+ (Errors Handler Block) embedded on top of the DW AXI Interconnect and
+ accessible by means of the Baikal-T1 System Controller.
+
+allOf:
+ - $ref: /schemas/simple-bus.yaml#
+
+properties:
+ compatible:
+ contains:
+ const: baikal,bt1-axi
+
+ reg:
+ minItems: 1
+ items:
+ - description: Synopsys DesignWare AXI Interconnect QoS registers
+ - description: AXI EHB MMIO system controller registers
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: qos
+ - const: ehb
+
+ '#interconnect-cells':
+ const: 1
+
+ syscon:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description: Phandle to the Baikal-T1 System Controller DT node
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Main Interconnect uplink reference clock
+
+ clock-names:
+ items:
+ - const: aclk
+
+ resets:
+ items:
+ - description: Main Interconnect reset line
+
+ reset-names:
+ items:
+ - const: arst
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - syscon
+ - interrupts
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+ bus@1f05a000 {
+ compatible = "baikal,bt1-axi", "simple-bus";
+ reg = <0 0x1f05a000 0 0x1000>,
+ <0 0x1f04d110 0 0x8>;
+ reg-names = "qos", "ehb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interconnect-cells = <1>;
+
+ syscon = <&syscon>;
+
+ ranges;
+
+ interrupts = <GIC_SHARED 127 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&ccu_axi 0>;
+ clock-names = "aclk";
+
+ resets = <&ccu_axi 0>;
+ reset-names = "arst";
+ };
+...
diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
new file mode 100644
index 000000000000..daeca6ae6b76
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
@@ -0,0 +1,56 @@
+Binding for NVIDIA Tegra20 CPUFreq
+==================================
+
+Required properties:
+- clocks: Must contain an entry for the CPU clock.
+ See ../clocks/clock-bindings.txt for details.
+- operating-points-v2: See ../bindings/opp/opp.txt for details.
+- #cooling-cells: Should be 2. See ../thermal/thermal.txt for details.
+
+For each opp entry in 'operating-points-v2' table:
+- opp-supported-hw: Two bitfields indicating:
+ On Tegra20:
+ 1. CPU process ID mask
+ 2. SoC speedo ID mask
+
+ On Tegra30:
+ 1. CPU process ID mask
+ 2. CPU speedo ID mask
+
+ A bitwise AND is performed against these values and if any bit
+ matches, the OPP gets enabled.
+
+- opp-microvolt: CPU voltage triplet.
+
+Optional properties:
+- cpu-supply: Phandle to the CPU power supply.
+
+Example:
+ regulators {
+ cpu_reg: regulator0 {
+ regulator-name = "vdd_cpu";
+ };
+ };
+
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+
+ opp@456000000 {
+ clock-latency-ns = <125000>;
+ opp-microvolt = <825000 825000 1125000>;
+ opp-supported-hw = <0x03 0x0001>;
+ opp-hz = /bits/ 64 <456000000>;
+ };
+
+ ...
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ clocks = <&tegra_car TEGRA20_CLK_CCLK>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ cpu-supply = <&cpu_reg>;
+ #cooling-cells = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index 9999255ac5b6..47319214b5f6 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -40,14 +40,30 @@ of the following host1x client modules:
Required properties:
- compatible: "nvidia,tegra<chip>-vi"
- - reg: Physical base address and length of the controller's registers.
+ - reg: Physical base address and length of the controller registers.
- interrupts: The interrupt outputs from the controller.
- - clocks: Must contain one entry, for the module clock.
+ - clocks: clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- - resets: Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
- - reset-names: Must include the following entries:
- - vi
+ - Tegra20/Tegra30/Tegra114/Tegra124:
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - vi
+ - Tegra210:
+ - power-domains: Must include venc powergate node as vi is in VE partition.
+ - Tegra210 has CSI part of VI sharing same host interface and register space.
+ So, VI device node should have CSI child node.
+
+ - csi: mipi csi interface to vi
+
+ Required properties:
+ - compatible: "nvidia,tegra210-csi"
+ - reg: Physical base address offset to parent and length of the controller
+ registers.
+ - clocks: Must contain entries csi, cilab, cilcd, cile, csi_tpg clocks.
+ See ../clocks/clock-bindings.txt for details.
+ - power-domains: Must include sor powergate node as csicil is in
+ SOR partition.
- epp: encoder pre-processor
@@ -309,13 +325,44 @@ Example:
reset-names = "mpe";
};
- vi {
- compatible = "nvidia,tegra20-vi";
- reg = <0x54080000 0x00040000>;
- interrupts = <0 69 0x04>;
- clocks = <&tegra_car TEGRA20_CLK_VI>;
- resets = <&tegra_car 100>;
- reset-names = "vi";
+ vi@54080000 {
+ compatible = "nvidia,tegra210-vi";
+ reg = <0x0 0x54080000 0x0 0x700>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+ clocks = <&tegra_car TEGRA210_CLK_VI>;
+ power-domains = <&pd_venc>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x0 0x0 0x54080000 0x2000>;
+
+ csi@838 {
+ compatible = "nvidia,tegra210-csi";
+ reg = <0x838 0x1300>;
+ assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+ <&tegra_car TEGRA210_CLK_CILCD>,
+ <&tegra_car TEGRA210_CLK_CILE>,
+ <&tegra_car TEGRA210_CLK_CSI_TPG>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+ <&tegra_car TEGRA210_CLK_PLL_P>,
+ <&tegra_car TEGRA210_CLK_PLL_P>;
+ assigned-clock-rates = <102000000>,
+ <102000000>,
+ <102000000>,
+ <972000000>;
+
+ clocks = <&tegra_car TEGRA210_CLK_CSI>,
+ <&tegra_car TEGRA210_CLK_CILAB>,
+ <&tegra_car TEGRA210_CLK_CILCD>,
+ <&tegra_car TEGRA210_CLK_CILE>,
+ <&tegra_car TEGRA210_CLK_CSI_TPG>;
+ clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
+ power-domains = <&pd_sor>;
+ };
};
epp {
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
index f64064f8bdc2..18c0de362451 100644
--- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
@@ -35,6 +35,12 @@ Required properties:
Due to above changes, Tegra114 I2C driver makes incompatible with
previous hardware driver. Hence, tegra114 I2C controller is compatible
with "nvidia,tegra114-i2c".
+ nvidia,tegra210-i2c-vi: Tegra210 has one I2C controller that is part of the
+ host1x domain and typically used for camera use-cases. This VI I2C
+ controller is mostly compatible with the programming model of the
+ regular I2C controllers with a few exceptions. The I2C registers start
+ at an offset of 0xc00 (instead of 0), registers are 16 bytes apart
+ (rather than 4) and the controller does not support slave mode.
- reg: Should contain I2C controller registers physical address and length.
- interrupts: Should contain I2C controller interrupts.
- address-cells: Address cells for I2C device address.
diff --git a/Documentation/devicetree/bindings/memory-controllers/baikal,bt1-l2-ctl.yaml b/Documentation/devicetree/bindings/memory-controllers/baikal,bt1-l2-ctl.yaml
new file mode 100644
index 000000000000..1fca282f64a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/baikal,bt1-l2-ctl.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/baikal,bt1-l2-ctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 L2-cache Control Block
+
+maintainers:
+ - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+ By means of the System Controller Baikal-T1 SoC exposes a few settings to
+ tune the MIPS P5600 CM2 L2 cache performance up. In particular it's possible
+ to change the Tag, Data and Way-select RAM access latencies. Baikal-T1
+ L2-cache controller block is responsible for the tuning. Its DT node is
+ supposed to be a child of the system controller.
+
+properties:
+ compatible:
+ const: baikal,bt1-l2-ctl
+
+ reg:
+ maxItems: 1
+
+ baikal,l2-ws-latency:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Cycles of latency for Way-select RAM accesses
+ default: 0
+ minimum: 0
+ maximum: 3
+
+ baikal,l2-tag-latency:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Cycles of latency for Tag RAM accesses
+ default: 0
+ minimum: 0
+ maximum: 3
+
+ baikal,l2-data-latency:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Cycles of latency for Data RAM accesses
+ default: 1
+ minimum: 0
+ maximum: 3
+
+additionalProperties: false
+
+required:
+ - compatible
+
+examples:
+ - |
+ l2@1f04d028 {
+ compatible = "baikal,bt1-l2-ctl";
+ reg = <0x1f04d028 0x004>;
+
+ baikal,l2-ws-latency = <1>;
+ baikal,l2-tag-latency = <1>;
+ baikal,l2-data-latency = <2>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
new file mode 100644
index 000000000000..49ab09252e52
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra210-emc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 SoC External Memory Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+ The EMC interfaces with the off-chip SDRAM to service the request stream
+ sent from the memory controller.
+
+properties:
+ compatible:
+ const: nvidia,tegra210-emc
+
+ reg:
+ maxItems: 3
+
+ clocks:
+ items:
+ - description: external memory clock
+
+ clock-names:
+ items:
+ - const: emc
+
+ interrupts:
+ items:
+ - description: EMC general interrupt
+
+ memory-region:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to a reserved memory region describing the table of EMC
+ frequencies trained by the firmware
+
+ nvidia,memory-controller:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle of the memory controller node
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - nvidia,memory-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra210-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ emc_table: emc-table@83400000 {
+ compatible = "nvidia,tegra210-emc-table";
+ reg = <0x83400000 0x10000>;
+ };
+ };
+
+ external-memory-controller@7001b000 {
+ compatible = "nvidia,tegra210-emc";
+ reg = <0x7001b000 0x1000>,
+ <0x7001e000 0x1000>,
+ <0x7001f000 0x1000>;
+ clocks = <&tegra_car TEGRA210_CLK_EMC>;
+ clock-names = "emc";
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ memory-region = <&emc_table>;
+ nvidia,memory-controller = <&mc>;
+ };
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
index 6c6079fe1351..51a6fac892e3 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
@@ -23,33 +23,31 @@ description: |+
properties:
compatible:
enum:
+ - amlogic,meson8-pwrc
+ - amlogic,meson8b-pwrc
+ - amlogic,meson8m2-pwrc
+ - amlogic,meson-gxbb-pwrc
- amlogic,meson-g12a-pwrc
- amlogic,meson-sm1-pwrc
clocks:
- minItems: 2
+ minItems: 1
+ maxItems: 2
clock-names:
+ minItems: 1
+ maxItems: 2
items:
- const: vpu
- const: vapb
resets:
minItems: 11
+ maxItems: 12
reset-names:
- items:
- - const: viu
- - const: venc
- - const: vcbus
- - const: bt656
- - const: rdma
- - const: venci
- - const: vencp
- - const: vdac
- - const: vdi6
- - const: vencl
- - const: vid_lock
+ minItems: 11
+ maxItems: 12
"#power-domain-cells":
const: 1
@@ -59,12 +57,86 @@ properties:
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - amlogic,meson8b-pwrc
+ - amlogic,meson8m2-pwrc
+ then:
+ properties:
+ reset-names:
+ items:
+ - const: dblk
+ - const: pic_dc
+ - const: hdmi_apb
+ - const: hdmi_system
+ - const: venci
+ - const: vencp
+ - const: vdac
+ - const: vencl
+ - const: viu
+ - const: venc
+ - const: rdma
+ required:
+ - resets
+ - reset-names
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - amlogic,meson-gxbb-pwrc
+ then:
+ properties:
+ reset-names:
+ items:
+ - const: viu
+ - const: venc
+ - const: vcbus
+ - const: bt656
+ - const: dvin
+ - const: rdma
+ - const: venci
+ - const: vencp
+ - const: vdac
+ - const: vdi6
+ - const: vencl
+ - const: vid_lock
+ required:
+ - resets
+ - reset-names
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - amlogic,meson-g12a-pwrc
+ - amlogic,meson-sm1-pwrc
+ then:
+ properties:
+ reset-names:
+ items:
+ - const: viu
+ - const: venc
+ - const: vcbus
+ - const: bt656
+ - const: rdma
+ - const: venci
+ - const: vencp
+ - const: vdac
+ - const: vdi6
+ - const: vencl
+ - const: vid_lock
+ required:
+ - resets
+ - reset-names
+
required:
- compatible
- clocks
- clock-names
- - resets
- - reset-names
- "#power-domain-cells"
- amlogic,ao-sysctrl
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
index ba605310abeb..8058955fb3b9 100644
--- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -23,6 +23,7 @@ properties:
- qcom,sc7180-rpmhpd
- qcom,sdm845-rpmhpd
- qcom,sm8150-rpmhpd
+ - qcom,sm8250-rpmhpd
'#power-domain-cells':
const: 1
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
index c2489e41a801..e10502d9153e 100644
--- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
+++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
@@ -9,6 +9,8 @@ Required properties:
- For i.MX7 SoCs should be "fsl,imx7d-src", "syscon"
- For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon"
- For i.MX8MM SoCs should be "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon"
+ - For i.MX8MN SoCs should be "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon"
+ - For i.MX8MP SoCs should be "fsl,imx8mp-src", "syscon"
- reg: should be register base and length as documented in the
datasheet
- interrupts: Should contain SRC interrupt
@@ -49,4 +51,6 @@ Example:
For list of all valid reset indices see
<dt-bindings/reset/imx7-reset.h> for i.MX7,
<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ and
-<dt-bindings/reset/imx8mq-reset.h> for i.MX8MM
+<dt-bindings/reset/imx8mq-reset.h> for i.MX8MM and
+<dt-bindings/reset/imx8mq-reset.h> for i.MX8MN and
+<dt-bindings/reset/imx8mp-reset.h> for i.MX8MP
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
index 4fc571e78f01..953add19e937 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
@@ -19,6 +19,7 @@ power-domains.
"qcom,sc7180-aoss-qmp"
"qcom,sdm845-aoss-qmp"
"qcom,sm8150-aoss-qmp"
+ "qcom,sm8250-aoss-qmp"
- reg:
Usage: required
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
index f8fa71f5d84b..2e2f6dc351c0 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
@@ -65,30 +65,30 @@ which uses apr as communication between Apps and QDSP.
compatible = "qcom,apr-v2";
qcom,apr-domain = <APR_DOMAIN_ADSP>;
- q6core@3 {
+ apr-service@3 {
compatible = "qcom,q6core";
reg = <APR_SVC_ADSP_CORE>;
};
- q6afe@4 {
+ apr-service@4 {
compatible = "qcom,q6afe";
reg = <APR_SVC_AFE>;
dais {
#sound-dai-cells = <1>;
- hdmi@1 {
- reg = <1>;
+ dai@1 {
+ reg = <HDMI_RX>;
};
};
};
- q6asm@7 {
+ apr-service@7 {
compatible = "qcom,q6asm";
reg = <APR_SVC_ASM>;
...
};
- q6adm@8 {
+ apr-service@8 {
compatible = "qcom,q6adm";
reg = <APR_SVC_ADM>;
...
@@ -106,26 +106,26 @@ have no such dependency.
qcom,glink-channels = "apr_audio_svc";
qcom,apr-domain = <APR_DOMAIN_ADSP>;
- q6core {
+ apr-service@3 {
compatible = "qcom,q6core";
reg = <APR_SVC_ADSP_CORE>;
};
- q6afe: q6afe {
+ q6afe: apr-service@4 {
compatible = "qcom,q6afe";
reg = <APR_SVC_AFE>;
qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
...
};
- q6asm: q6asm {
+ q6asm: apr-service@7 {
compatible = "qcom,q6asm";
reg = <APR_SVC_ASM>;
qcom,protection-domain = "tms/servreg", "msm/slpi/sensor_pd";
...
};
- q6adm: q6adm {
+ q6adm: apr-service@8 {
compatible = "qcom,q6adm";
reg = <APR_SVC_ADM>;
qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
diff --git a/Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml b/Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml
new file mode 100644
index 000000000000..a1a8423b2e2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/ti/k3-socinfo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Multicore SoC platforms chipid module
+
+maintainers:
+ - Tero Kristo <t-kristo@ti.com>
+ - Nishanth Menon <nm@ti.com>
+
+description: |
+ Texas Instruments (ARM64) K3 Multicore SoC platforms chipid module is
+ represented by CTRLMMR_xxx_JTAGID register which contains information about
+ SoC id and revision.
+
+properties:
+ $nodename:
+ pattern: "^chipid@[0-9a-f]+$"
+
+ compatible:
+ items:
+ - const: ti,am654-chipid
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ chipid@43000014 {
+ compatible = "ti,am654-chipid";
+ reg = <0x43000014 0x4>;
+ };