Merge tag 'timers-core-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "Time, timers and related driver updates:

   - Prevent unnecessary timer softirq invocations by extending the
     tracking of the next expiring timer in the timer wheel beyond the
     existing NOHZ functionality.

     The tracking overhead at enqueue time is within the noise, but on
     sensitive workloads the avoidance of the soft interrupt invocation
     is a measurable improvement.

   - The obligatory new clocksource driver for Ingenic X100 OST

   - The usual fixes, improvements, cleanups and extensions for newer
     chip variants all over the driver space"

* tag 'timers-core-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
  timers: Recalculate next timer interrupt only when necessary
  clocksource/drivers/ingenic: Add support for the Ingenic X1000 OST.
  dt-bindings: timer: Add Ingenic X1000 OST bindings.
  clocksource/drivers: Replace HTTP links with HTTPS ones
  clocksource/drivers/nomadik-mtu: Handle 32kHz clock
  clocksource/drivers/sh_cmt: Use "kHz" for kilohertz
  clocksource/drivers/imx: Add support for i.MX TPM driver with ARM64
  clocksource/drivers/ingenic: Add high resolution timer support for SMP/SMT.
  timers: Lower base clock forwarding threshold
  timers: Remove must_forward_clk
  timers: Spare timer softirq until next expiry
  timers: Expand clk forward logic beyond nohz
  timers: Reuse next expiry cache after nohz exit
  timers: Always keep track of next expiry
  timers: Optimize _next_timer_interrupt() level iteration
  timers: Add comments about calc_index() ceiling work
  timers: Move trigger_dyntick_cpu() to enqueue_timer()
  timers: Use only bucket expiry for base->next_expiry value
  timers: Preserve higher bits of expiration on index calculation
  clocksource/drivers/timer-atmel-tcb: Add sama5d2 support
  ...

1 files changed, 0 insertions, 56 deletions

diff --git a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt b/Documentation/devicetree/bindings/mfd/atmel-tcb.txt
deleted file mode 100644
index c4a83e364cb6..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Device tree bindings for Atmel Timer Counter Blocks
-- compatible: Should be "atmel,<chip>-tcb", "simple-mfd", "syscon".
-  <chip> can be "at91rm9200" or "at91sam9x5"
-- reg: Should contain registers location and length
-- #address-cells: has to be 1
-- #size-cells: has to be 0
-- interrupts: Should contain all interrupts for the TC block
-  Note that you can specify several interrupt cells if the TC
-  block has one interrupt per channel.
-- clock-names: tuple listing input clock names.
-	Required elements: "t0_clk", "slow_clk"
-	Optional elements: "t1_clk", "t2_clk"
-- clocks: phandles to input clocks.
-
-The TCB can expose multiple subdevices:
- * a timer
-   - compatible: Should be "atmel,tcb-timer"
-   - reg: Should contain the TCB channels to be used. If the
-     counter width is 16 bits (at91rm9200-tcb), two consecutive
-     channels are needed. Else, only one channel will be used.
-
-Examples:
-
-One interrupt per TC block:
-	tcb0: timer@fff7c000 {
-		compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0xfff7c000 0x100>;
-		interrupts = <18 4>;
-		clocks = <&tcb0_clk>, <&clk32k>;
-		clock-names = "t0_clk", "slow_clk";
-
-		timer@0 {
-			compatible = "atmel,tcb-timer";
-			reg = <0>, <1>;
-		};
-
-		timer@2 {
-			compatible = "atmel,tcb-timer";
-			reg = <2>;
-		};
-	};
-
-One interrupt per TC channel in a TC block:
-	tcb1: timer@fffdc000 {
-		compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0xfffdc000 0x100>;
-		interrupts = <26 4>, <27 4>, <28 4>;
-		clocks = <&tcb1_clk>, <&clk32k>;
-		clock-names = "t0_clk", "slow_clk";
-	};
-
-