summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/input
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-09-04 22:02:11 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2015-09-04 22:02:11 +0300
commit51e771c0d25b43d0f12b2c7c01939942becbbe28 (patch)
treedf82af16b012c452c1457f431e57d47c8c2bacd2 /Documentation/devicetree/bindings/input
parentabebcdfb64f1b39eeeb14282d9cd4aad1ed86f8d (diff)
parent01b944fe1cd4e21a2a9ed51adbdbafe2d5e905ba (diff)
downloadlinux-51e771c0d25b43d0f12b2c7c01939942becbbe28.tar.xz
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov: "Drivers, drivers, drivers... No interesting input core changes this time" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (74 commits) Input: elan_i2c - use iap_version to get firmware information Input: max8997_haptic - fix module alias Input: elan_i2c - fix typos for validpage_count Input: psmouse - add small delay for IBM trackpoint pass-through mode Input: synaptics - fix handling of disabling gesture mode Input: elan_i2c - enable ELAN0100 acpi panels Input: gpio-keys - report error when disabling unsupported key Input: sur40 - fix error return code Input: sentelic - silence some underflow warnings Input: zhenhua - switch to using bitrev8() Input: cros_ec_keyb - replace KEYBOARD_CROS_EC dependency Input: cap11xx - add LED support Input: elants_i2c - fix for devm_gpiod_get API change Input: elan_i2c - enable asynchronous probing Input: elants_i2c - enable asynchronous probing Input: elants_i2c - wire up regulator support Input: do not emit unneeded EV_SYN when suspending Input: elants_i2c - disable idle mode before updating firmware MAINTAINERS: Add maintainer for atmel_mxt_ts Input: atmel_mxt_ts - remove warning on zero T44 count ...
Diffstat (limited to 'Documentation/devicetree/bindings/input')
-rw-r--r--Documentation/devicetree/bindings/input/ads7846.txt2
-rw-r--r--Documentation/devicetree/bindings/input/cap11xx.txt19
-rw-r--r--Documentation/devicetree/bindings/input/cypress,cyapa.txt44
-rw-r--r--Documentation/devicetree/bindings/input/elants_i2c.txt3
-rw-r--r--Documentation/devicetree/bindings/input/gpio-keys-polled.txt2
-rw-r--r--Documentation/devicetree/bindings/input/gpio-keys.txt2
-rw-r--r--Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt2
-rw-r--r--Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt2
-rw-r--r--Documentation/devicetree/bindings/input/samsung-keypad.txt4
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt3
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt8
11 files changed, 81 insertions, 10 deletions
diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt
index 5f7619c22743..df8b1279491d 100644
--- a/Documentation/devicetree/bindings/input/ads7846.txt
+++ b/Documentation/devicetree/bindings/input/ads7846.txt
@@ -64,7 +64,7 @@ Optional properties:
pendown-gpio (u32).
pendown-gpio GPIO handle describing the pin the !PENIRQ
line is connected to.
- linux,wakeup use any event on touchscreen as wakeup event.
+ wakeup-source use any event on touchscreen as wakeup event.
Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC::
diff --git a/Documentation/devicetree/bindings/input/cap11xx.txt b/Documentation/devicetree/bindings/input/cap11xx.txt
index 7d0a3009771b..8c67a0b5058d 100644
--- a/Documentation/devicetree/bindings/input/cap11xx.txt
+++ b/Documentation/devicetree/bindings/input/cap11xx.txt
@@ -55,5 +55,24 @@ i2c_controller {
<105>, /* KEY_LEFT */
<109>, /* KEY_PAGEDOWN */
<104>; /* KEY_PAGEUP */
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usr@0 {
+ label = "cap11xx:green:usr0";
+ reg = <0>;
+ };
+
+ usr@1 {
+ label = "cap11xx:green:usr1";
+ reg = <1>;
+ };
+
+ alive@2 {
+ label = "cap11xx:green:alive";
+ reg = <2>;
+ linux,default_trigger = "heartbeat";
+ };
};
}
diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
new file mode 100644
index 000000000000..635a3b036630
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
@@ -0,0 +1,44 @@
+Cypress I2C Touchpad
+
+Required properties:
+- compatible: must be "cypress,cyapa".
+- reg: I2C address of the chip.
+- interrupt-parent: a phandle for the interrupt controller (see interrupt
+ binding[0]).
+- interrupts: interrupt to which the chip is connected (see interrupt
+ binding[0]).
+
+Optional properties:
+- wakeup-source: touchpad can be used as a wakeup source.
+- pinctrl-names: should be "default" (see pinctrl binding [1]).
+- pinctrl-0: a phandle pointing to the pin settings for the device (see
+ pinctrl binding [1]).
+- vcc-supply: a phandle for the regulator supplying 3.3V power.
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Example:
+ &i2c0 {
+ /* ... */
+
+ /* Cypress Gen3 touchpad */
+ touchpad@67 {
+ compatible = "cypress,cyapa";
+ reg = <0x24>;
+ interrupt-parent = <&gpio>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
+ wakeup-source;
+ };
+
+ /* Cypress Gen5 and later touchpad */
+ touchpad@24 {
+ compatible = "cypress,cyapa";
+ reg = <0x24>;
+ interrupt-parent = <&gpio>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
+ wakeup-source;
+ };
+
+ /* ... */
+ };
diff --git a/Documentation/devicetree/bindings/input/elants_i2c.txt b/Documentation/devicetree/bindings/input/elants_i2c.txt
index a765232e6446..8a71038f3489 100644
--- a/Documentation/devicetree/bindings/input/elants_i2c.txt
+++ b/Documentation/devicetree/bindings/input/elants_i2c.txt
@@ -13,6 +13,9 @@ Optional properties:
- pinctrl-names: should be "default" (see pinctrl binding [1]).
- pinctrl-0: a phandle pointing to the pin settings for the device (see
pinctrl binding [1]).
+- reset-gpios: reset gpio the chip is connected to.
+- vcc33-supply: a phandle for the regulator supplying 3.3V power.
+- vccio-supply: a phandle for the regulator supplying IO power.
[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
index 313abefa37cc..5b91f5a3bd5c 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
@@ -20,7 +20,7 @@ Optional subnode-properties:
If not specified defaults to <1> == EV_KEY.
- debounce-interval: Debouncing interval time in milliseconds.
If not specified defaults to 5.
- - gpio-key,wakeup: Boolean, button can wake-up the system.
+ - wakeup-source: Boolean, button can wake-up the system.
Example nodes:
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt
index 44b705767aca..072bf7573c37 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys.txt
@@ -23,7 +23,7 @@ Optional subnode-properties:
If not specified defaults to <1> == EV_KEY.
- debounce-interval: Debouncing interval time in milliseconds.
If not specified defaults to 5.
- - gpio-key,wakeup: Boolean, button can wake-up the system.
+ - wakeup-source: Boolean, button can wake-up the system.
- linux,can-disable: Boolean, indicates that button is connected
to dedicated (not shared) interrupt which can be disabled to
suppress events from the button.
diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
index ead641c65e0a..4d86059c370c 100644
--- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
@@ -19,7 +19,7 @@ Required Properties:
Optional Properties:
- linux,no-autorepeat: do no enable autorepeat feature.
-- linux,wakeup: use any event on keypad as wakeup event.
+- wakeup-source: use any event on keypad as wakeup event.
- debounce-delay-ms: debounce interval in milliseconds
- col-scan-delay-us: delay, measured in microseconds, that is needed
before we can scan keypad after activating column gpio
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
index 7d8cb92831d7..ee6215681182 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
@@ -33,7 +33,7 @@ PROPERTIES
Value type: <bool>
Definition: don't enable autorepeat feature.
-- linux,keypad-wakeup:
+- wakeup-source:
Usage: optional
Value type: <bool>
Definition: use any event on keypad as wakeup event.
diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt
index 942d071baaa5..863e77f619dc 100644
--- a/Documentation/devicetree/bindings/input/samsung-keypad.txt
+++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt
@@ -36,9 +36,11 @@ Required Board Specific Properties:
- pinctrl-0: Should specify pin control groups used for this controller.
- pinctrl-names: Should contain only one value - "default".
+Optional Properties:
+- wakeup-source: use any event on keypad as wakeup event.
+
Optional Properties specific to linux:
- linux,keypad-no-autorepeat: do no enable autorepeat feature.
-- linux,keypad-wakeup: use any event on keypad as wakeup event.
Example:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
index 6e551090f465..8eb240a287c8 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
@@ -8,6 +8,9 @@ Required properties:
- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
+Optional properties:
+- reset-gpio: GPIO connected to the RESET line of the chip
+
Example:
i2c@00000000 {
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
index 80c37df940a7..e3c27c4fd9c8 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
@@ -4,12 +4,12 @@ Required properties:
- compatible: must be "neonode,zforce"
- reg: I2C address of the chip
- interrupts: interrupt to which the chip is connected
-- gpios: gpios the chip is connected to
- first one is the interrupt gpio and second one the reset gpio
+- reset-gpios: reset gpio the chip is connected to
- x-size: horizontal resolution of touchscreen
- y-size: vertical resolution of touchscreen
Optional properties:
+- irq-gpios : interrupt gpio the chip is connected to
- vdd-supply: Regulator controlling the controller supply
Example:
@@ -23,8 +23,8 @@ Example:
interrupts = <2 0>;
vdd-supply = <&reg_zforce_vdd>;
- gpios = <&gpio5 6 0>, /* INT */
- <&gpio5 9 0>; /* RST */
+ reset-gpios = <&gpio5 9 0>; /* RST */
+ irq-gpios = <&gpio5 6 0>; /* IRQ, optional */
x-size = <800>;
y-size = <600>;