Merge tag 'irqchip-core-4.1-3' of git://git.infradead.org/users/jcooper/linux into irq/core

irqchip core change for v4.1 (round 3) from Jason Cooper

 Purge the gic_arch_extn hacks and abuse by using the new stacked domains

   NOTE: Due to the nature of these changes, patches crossing subsystems have
         been kept together in their own branches.

    - tegra
       - Handle the LIC properly

    - omap
       - Convert crossbar to stacked domains
       - kill arm,routable-irqs in GIC binding

    - exynos
       - Convert PMU wakeup to stacked domains

    - shmobile, ux500, zynq (irq_set_wake branch)
       - Switch from abusing gic_arch_extn to using gic_set_irqchip_flags

3 files changed, 22 insertions, 19 deletions

diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index c97484b73e72..1e0d21201d3a 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -56,11 +56,6 @@ Optional
   regions, used when the GIC doesn't have banked registers. The offset is
   cpu-offset * cpu-nr.
 
-- arm,routable-irqs : Total number of gic irq inputs which are not directly
-		  connected from the peripherals, but are routed dynamically
-		  by a crossbar/multiplexer preceding the GIC. The GIC irq
-		  input line is assigned dynamically when the corresponding
-		  peripheral's crossbar line is mapped.
 Example:
 
 	intc: interrupt-controller@fff11000 {
@@ -68,7 +63,6 @@ Example:
 		#interrupt-cells = <3>;
 		#address-cells = <1>;
 		interrupt-controller;
-		arm,routable-irqs = <160>;
 		reg = <0xfff11000 0x1000>,
 		      <0xfff10100 0x100>;
 	};
diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
index 4139db353d0a..a9b28d74d902 100644
--- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt
+++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
@@ -9,7 +9,9 @@ inputs.
 Required properties:
 - compatible : Should be "ti,irq-crossbar"
 - reg: Base address and the size of the crossbar registers.
-- ti,max-irqs: Total number of irqs available at the interrupt controller.
+- interrupt-controller: indicates that this block is an interrupt controller.
+- interrupt-parent: the interrupt controller this block is connected to.
+- ti,max-irqs: Total number of irqs available at the parent interrupt controller.
 - ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
 - ti,reg-size: Size of a individual register in bytes. Every individual
 	    register is assumed to be of same size. Valid sizes are 1, 2, 4.
@@ -27,13 +29,13 @@ Optional properties:
   when the interrupt controller irq is unused (when not provided, default is 0)
 
 Examples:
-		crossbar_mpu: @4a020000 {
+		crossbar_mpu: crossbar@4a002a48 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;
 			ti,max-irqs = <160>;
 			ti,max-crossbar-sources = <400>;
 			ti,reg-size = <2>;
-			ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+			ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
 			ti,irqs-skip = <10 133 139 140>;
 		};
 
@@ -44,10 +46,6 @@ Documentation/devicetree/bindings/arm/gic.txt for further details.
 
 An interrupt consumer on an SoC using crossbar will use:
 	interrupts = <GIC_SPI request_number interrupt_level>
-When the request number is between 0 to that described by
-"ti,max-crossbar-sources", it is assumed to be a crossbar mapping. If the
-request_number is greater than "ti,max-crossbar-sources", then it is mapped as a
-quirky hardware mapping direct to GIC.
 
 Example:
 	device_x@0x4a023000 {
@@ -55,9 +53,3 @@ Example:
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		...
 	};
-
-	device_y@0x4a033000 {
-		/* Direct mapped GIC SPI 1 used */
-		interrupts = <GIC_SPI DIRECT_IRQ(1) IRQ_TYPE_LEVEL_HIGH>;
-		...
-	};
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
index 67b211381f2b..2d6356d8daf4 100644
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
@@ -29,10 +29,27 @@ Properties:
  - clocks : list of phandles and specifiers to all input clocks listed in
 		clock-names property.
 
+Optional properties:
+
+Some PMUs are capable of behaving as an interrupt controller (mostly
+to wake up a suspended PMU). In which case, they can have the
+following properties:
+
+- interrupt-controller: indicate that said PMU is an interrupt controller
+
+- #interrupt-cells: must be identical to the that of the parent interrupt
+  controller.
+
+- interrupt-parent: a phandle indicating which interrupt controller
+  this PMU signals interrupts to.
+
 Example :
 pmu_system_controller: system-controller@10040000 {
 	compatible = "samsung,exynos5250-pmu", "syscon";
 	reg = <0x10040000 0x5000>;
+	interrupt-controller;
+	#interrupt-cells = <3>;
+	interrupt-parent = <&gic>;
 	#clock-cells = <1>;
 	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
 			"clkout4", "clkout8", "clkout9";