Documentation/admin-guide: split the device list to a separate file

Include the literal device list from a separate file. This helps the pdf
build.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

1 files changed, 2 insertions, 3084 deletions

diff --git a/Documentation/admin-guide/devices.rst b/Documentation/admin-guide/devices.rst
index 89db341fba7a..7fadc05330dd 100644
--- a/Documentation/admin-guide/devices.rst
+++ b/Documentation/admin-guide/devices.rst
@@ -56,3090 +56,8 @@ an unreasonable effort.
 
   Your cooperation is appreciated.
 
-::
-
-   0		Unnamed devices (e.g. non-device mounts)
-		  0 = reserved as null device number
-		See block major 144, 145, 146 for expansion areas.
-
-   1 char	Memory devices
-		  1 = /dev/mem		Physical memory access
-		  2 = /dev/kmem		Kernel virtual memory access
-		  3 = /dev/null		Null device
-		  4 = /dev/port		I/O port access
-		  5 = /dev/zero		Null byte source
-		  6 = /dev/core		OBSOLETE - replaced by /proc/kcore
-		  7 = /dev/full		Returns ENOSPC on write
-		  8 = /dev/random	Nondeterministic random number gen.
-		  9 = /dev/urandom	Faster, less secure random number gen.
-		 10 = /dev/aio		Asynchronous I/O notification interface
-		 11 = /dev/kmsg		Writes to this come out as printk's, reads
-					export the buffered printk records.
-		 12 = /dev/oldmem	OBSOLETE - replaced by /proc/vmcore
-
-   1 block	RAM disk
-		  0 = /dev/ram0		First RAM disk
-		  1 = /dev/ram1		Second RAM disk
-		    ...
-		250 = /dev/initrd	Initial RAM disk
-
-		Older kernels had /dev/ramdisk (1, 1) here.
-		/dev/initrd refers to a RAM disk which was preloaded
-		by the boot loader; newer kernels use /dev/ram0 for
-		the initrd.
-
-   2 char	Pseudo-TTY masters
-		  0 = /dev/ptyp0	First PTY master
-		  1 = /dev/ptyp1	Second PTY master
-		    ...
-		255 = /dev/ptyef	256th PTY master
-
-		Pseudo-tty's are named as follows:
-		* Masters are "pty", slaves are "tty";
-		* the fourth letter is one of pqrstuvwxyzabcde indicating
-		  the 1st through 16th series of 16 pseudo-ttys each, and
-		* the fifth letter is one of 0123456789abcdef indicating
-		  the position within the series.
-
-		These are the old-style (BSD) PTY devices; Unix98
-		devices are on major 128 and above and use the PTY
-		master multiplex (/dev/ptmx) to acquire a PTY on
-		demand.
-
-   2 block	Floppy disks
-		  0 = /dev/fd0		Controller 0, drive 0, autodetect
-		  1 = /dev/fd1		Controller 0, drive 1, autodetect
-		  2 = /dev/fd2		Controller 0, drive 2, autodetect
-		  3 = /dev/fd3		Controller 0, drive 3, autodetect
-		128 = /dev/fd4		Controller 1, drive 0, autodetect
-		129 = /dev/fd5		Controller 1, drive 1, autodetect
-		130 = /dev/fd6		Controller 1, drive 2, autodetect
-		131 = /dev/fd7		Controller 1, drive 3, autodetect
-
-		To specify format, add to the autodetect device number:
-		  0 = /dev/fd?		Autodetect format
-		  4 = /dev/fd?d360	5.25"  360K in a 360K  drive(1)
-		 20 = /dev/fd?h360	5.25"  360K in a 1200K drive(1)
-		 48 = /dev/fd?h410	5.25"  410K in a 1200K drive
-		 64 = /dev/fd?h420	5.25"  420K in a 1200K drive
-		 24 = /dev/fd?h720	5.25"  720K in a 1200K drive
-		 80 = /dev/fd?h880	5.25"  880K in a 1200K drive(1)
-		  8 = /dev/fd?h1200	5.25" 1200K in a 1200K drive(1)
-		 40 = /dev/fd?h1440	5.25" 1440K in a 1200K drive(1)
-		 56 = /dev/fd?h1476	5.25" 1476K in a 1200K drive
-		 72 = /dev/fd?h1494	5.25" 1494K in a 1200K drive
-		 92 = /dev/fd?h1600	5.25" 1600K in a 1200K drive(1)
-
-		 12 = /dev/fd?u360	3.5"   360K Double Density(2)
-		 16 = /dev/fd?u720	3.5"   720K Double Density(1)
-		120 = /dev/fd?u800	3.5"   800K Double Density(2)
-		 52 = /dev/fd?u820	3.5"   820K Double Density
-		 68 = /dev/fd?u830	3.5"   830K Double Density
-		 84 = /dev/fd?u1040	3.5"  1040K Double Density(1)
-		 88 = /dev/fd?u1120	3.5"  1120K Double Density(1)
-		 28 = /dev/fd?u1440	3.5"  1440K High Density(1)
-		124 = /dev/fd?u1600	3.5"  1600K High Density(1)
-		 44 = /dev/fd?u1680	3.5"  1680K High Density(3)
-		 60 = /dev/fd?u1722	3.5"  1722K High Density
-		 76 = /dev/fd?u1743	3.5"  1743K High Density
-		 96 = /dev/fd?u1760	3.5"  1760K High Density
-		116 = /dev/fd?u1840	3.5"  1840K High Density(3)
-		100 = /dev/fd?u1920	3.5"  1920K High Density(1)
-		 32 = /dev/fd?u2880	3.5"  2880K Extra Density(1)
-		104 = /dev/fd?u3200	3.5"  3200K Extra Density
-		108 = /dev/fd?u3520	3.5"  3520K Extra Density
-		112 = /dev/fd?u3840	3.5"  3840K Extra Density(1)
-
-		 36 = /dev/fd?CompaQ	Compaq 2880K drive; obsolete?
-
-		(1) Autodetectable format
-		(2) Autodetectable format in a Double Density (720K) drive only
-		(3) Autodetectable format in a High Density (1440K) drive only
-
-		NOTE: The letter in the device name (d, q, h or u)
-		signifies the type of drive: 5.25" Double Density (d),
-		5.25" Quad Density (q), 5.25" High Density (h) or 3.5"
-		(any model, u).	 The use of the capital letters D, H
-		and E for the 3.5" models have been deprecated, since
-		the drive type is insignificant for these devices.
-
-   3 char	Pseudo-TTY slaves
-		  0 = /dev/ttyp0	First PTY slave
-		  1 = /dev/ttyp1	Second PTY slave
-		    ...
-		255 = /dev/ttyef	256th PTY slave
-
-		These are the old-style (BSD) PTY devices; Unix98
-		devices are on major 136 and above.
-
-   3 block	First MFM, RLL and IDE hard disk/CD-ROM interface
-		  0 = /dev/hda		Master: whole disk (or CD-ROM)
-		 64 = /dev/hdb		Slave: whole disk (or CD-ROM)
-
-		For partitions, add to the whole disk device number:
-		  0 = /dev/hd?		Whole disk
-		  1 = /dev/hd?1		First partition
-		  2 = /dev/hd?2		Second partition
-		    ...
-		 63 = /dev/hd?63	63rd partition
-
-		For Linux/i386, partitions 1-4 are the primary
-		partitions, and 5 and above are logical partitions.
-		Other versions of Linux use partitioning schemes
-		appropriate to their respective architectures.
-
-   4 char	TTY devices
-		  0 = /dev/tty0		Current virtual console
-
-		  1 = /dev/tty1		First virtual console
-		    ...
-		 63 = /dev/tty63	63rd virtual console
-		 64 = /dev/ttyS0	First UART serial port
-		    ...
-		255 = /dev/ttyS191	192nd UART serial port
-
-		UART serial ports refer to 8250/16450/16550 series devices.
-
-		Older versions of the Linux kernel used this major
-		number for BSD PTY devices.  As of Linux 2.1.115, this
-		is no longer supported.	 Use major numbers 2 and 3.
-
-   4 block	Aliases for dynamically allocated major devices to be used
-		when its not possible to create the real device nodes
-		because the root filesystem is mounted read-only.
-
-		   0 = /dev/root
-
-   5 char	Alternate TTY devices
-		  0 = /dev/tty		Current TTY device
-		  1 = /dev/console	System console
-		  2 = /dev/ptmx		PTY master multiplex
-		  3 = /dev/ttyprintk	User messages via printk TTY device
-		 64 = /dev/cua0		Callout device for ttyS0
-		    ...
-		255 = /dev/cua191	Callout device for ttyS191
-
-		(5,1) is /dev/console starting with Linux 2.1.71.  See
-		the section on terminal devices for more information
-		on /dev/console.
-
-   6 char	Parallel printer devices
-		  0 = /dev/lp0		Parallel printer on parport0
-		  1 = /dev/lp1		Parallel printer on parport1
-		    ...
-
-		Current Linux kernels no longer have a fixed mapping
-		between parallel ports and I/O addresses.  Instead,
-		they are redirected through the parport multiplex layer.
-
-   7 char	Virtual console capture devices
-		  0 = /dev/vcs		Current vc text contents
-		  1 = /dev/vcs1		tty1 text contents
-		    ...
-		 63 = /dev/vcs63	tty63 text contents
-		128 = /dev/vcsa		Current vc text/attribute contents
-		129 = /dev/vcsa1	tty1 text/attribute contents
-		    ...
-		191 = /dev/vcsa63	tty63 text/attribute contents
-
-		NOTE: These devices permit both read and write access.
-
-   7 block	Loopback devices
-		  0 = /dev/loop0	First loop device
-		  1 = /dev/loop1	Second loop device
-		    ...
-
-		The loop devices are used to mount filesystems not
-		associated with block devices.	The binding to the
-		loop devices is handled by mount(8) or losetup(8).
-
-   8 block	SCSI disk devices (0-15)
-		  0 = /dev/sda		First SCSI disk whole disk
-		 16 = /dev/sdb		Second SCSI disk whole disk
-		 32 = /dev/sdc		Third SCSI disk whole disk
-		    ...
-		240 = /dev/sdp		Sixteenth SCSI disk whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
-   9 char	SCSI tape devices
-		  0 = /dev/st0		First SCSI tape, mode 0
-		  1 = /dev/st1		Second SCSI tape, mode 0
-		    ...
-		 32 = /dev/st0l		First SCSI tape, mode 1
-		 33 = /dev/st1l		Second SCSI tape, mode 1
-		    ...
-		 64 = /dev/st0m		First SCSI tape, mode 2
-		 65 = /dev/st1m		Second SCSI tape, mode 2
-		    ...
-		 96 = /dev/st0a		First SCSI tape, mode 3
-		 97 = /dev/st1a		Second SCSI tape, mode 3
-		      ...
-		128 = /dev/nst0		First SCSI tape, mode 0, no rewind
-		129 = /dev/nst1		Second SCSI tape, mode 0, no rewind
-		    ...
-		160 = /dev/nst0l	First SCSI tape, mode 1, no rewind
-		161 = /dev/nst1l	Second SCSI tape, mode 1, no rewind
-		    ...
-		192 = /dev/nst0m	First SCSI tape, mode 2, no rewind
-		193 = /dev/nst1m	Second SCSI tape, mode 2, no rewind
-		    ...
-		224 = /dev/nst0a	First SCSI tape, mode 3, no rewind
-		225 = /dev/nst1a	Second SCSI tape, mode 3, no rewind
-		    ...
-
-		"No rewind" refers to the omission of the default
-		automatic rewind on device close.  The MTREW or MTOFFL
-		ioctl()'s can be used to rewind the tape regardless of
-		the device used to access it.
-
-   9 block	Metadisk (RAID) devices
-		  0 = /dev/md0		First metadisk group
-		  1 = /dev/md1		Second metadisk group
-		    ...
-
-		The metadisk driver is used to span a
-		filesystem across multiple physical disks.
-
-  10 char	Non-serial mice, misc features
-		  0 = /dev/logibm	Logitech bus mouse
-		  1 = /dev/psaux	PS/2-style mouse port
-		  2 = /dev/inportbm	Microsoft Inport bus mouse
-		  3 = /dev/atibm	ATI XL bus mouse
-		  4 = /dev/jbm		J-mouse
-		  4 = /dev/amigamouse	Amiga mouse (68k/Amiga)
-		  5 = /dev/atarimouse	Atari mouse
-		  6 = /dev/sunmouse	Sun mouse
-		  7 = /dev/amigamouse1	Second Amiga mouse
-		  8 = /dev/smouse	Simple serial mouse driver
-		  9 = /dev/pc110pad	IBM PC-110 digitizer pad
-		 10 = /dev/adbmouse	Apple Desktop Bus mouse
-		 11 = /dev/vrtpanel	Vr41xx embedded touch panel
-		 13 = /dev/vpcmouse	Connectix Virtual PC Mouse
-		 14 = /dev/touchscreen/ucb1x00  UCB 1x00 touchscreen
-		 15 = /dev/touchscreen/mk712	MK712 touchscreen
-		128 = /dev/beep		Fancy beep device
-		129 =
-		130 = /dev/watchdog	Watchdog timer port
-		131 = /dev/temperature	Machine internal temperature
-		132 = /dev/hwtrap	Hardware fault trap
-		133 = /dev/exttrp	External device trap
-		134 = /dev/apm_bios	Advanced Power Management BIOS
-		135 = /dev/rtc		Real Time Clock
-		137 = /dev/vhci		Bluetooth virtual HCI driver
-		139 = /dev/openprom	SPARC OpenBoot PROM
-		140 = /dev/relay8	Berkshire Products Octal relay card
-		141 = /dev/relay16	Berkshire Products ISO-16 relay card
-		142 =
-		143 = /dev/pciconf	PCI configuration space
-		144 = /dev/nvram	Non-volatile configuration RAM
-		145 = /dev/hfmodem	Soundcard shortwave modem control
-		146 = /dev/graphics	Linux/SGI graphics device
-		147 = /dev/opengl	Linux/SGI OpenGL pipe
-		148 = /dev/gfx		Linux/SGI graphics effects device
-		149 = /dev/input/mouse	Linux/SGI Irix emulation mouse
-		150 = /dev/input/keyboard Linux/SGI Irix emulation keyboard
-		151 = /dev/led		Front panel LEDs
-		152 = /dev/kpoll	Kernel Poll Driver
-		153 = /dev/mergemem	Memory merge device
-		154 = /dev/pmu		Macintosh PowerBook power manager
-		155 = /dev/isictl	MultiTech ISICom serial control
-		156 = /dev/lcd		Front panel LCD display
-		157 = /dev/ac		Applicom Intl Profibus card
-		158 = /dev/nwbutton	Netwinder external button
-		159 = /dev/nwdebug	Netwinder debug interface
-		160 = /dev/nwflash	Netwinder flash memory
-		161 = /dev/userdma	User-space DMA access
-		162 = /dev/smbus	System Management Bus
-		163 = /dev/lik		Logitech Internet Keyboard
-		164 = /dev/ipmo		Intel Intelligent Platform Management
-		165 = /dev/vmmon	VMware virtual machine monitor
-		166 = /dev/i2o/ctl	I2O configuration manager
-		167 = /dev/specialix_sxctl Specialix serial control
-		168 = /dev/tcldrv	Technology Concepts serial control
-		169 = /dev/specialix_rioctl Specialix RIO serial control
-		170 = /dev/thinkpad/thinkpad	IBM Thinkpad devices
-		171 = /dev/srripc	QNX4 API IPC manager
-		172 = /dev/usemaclone	Semaphore clone device
-		173 = /dev/ipmikcs	Intelligent Platform Management
-		174 = /dev/uctrl	SPARCbook 3 microcontroller
-		175 = /dev/agpgart	AGP Graphics Address Remapping Table
-		176 = /dev/gtrsc	Gorgy Timing radio clock
-		177 = /dev/cbm		Serial CBM bus
-		178 = /dev/jsflash	JavaStation OS flash SIMM
-		179 = /dev/xsvc		High-speed shared-mem/semaphore service
-		180 = /dev/vrbuttons	Vr41xx button input device
-		181 = /dev/toshiba	Toshiba laptop SMM support
-		182 = /dev/perfctr	Performance-monitoring counters
-		183 = /dev/hwrng	Generic random number generator
-		184 = /dev/cpu/microcode CPU microcode update interface
-		186 = /dev/atomicps	Atomic shapshot of process state data
-		187 = /dev/irnet	IrNET device
-		188 = /dev/smbusbios	SMBus BIOS
-		189 = /dev/ussp_ctl	User space serial port control
-		190 = /dev/crash	Mission Critical Linux crash dump facility
-		191 = /dev/pcl181	<information missing>
-		192 = /dev/nas_xbus	NAS xbus LCD/buttons access
-		193 = /dev/d7s		SPARC 7-segment display
-		194 = /dev/zkshim	Zero-Knowledge network shim control
-		195 = /dev/elographics/e2201	Elographics touchscreen E271-2201
-		196 = /dev/vfio/vfio	VFIO userspace driver interface
-		197 = /dev/pxa3xx-gcu	PXA3xx graphics controller unit driver
-		198 = /dev/sexec	Signed executable interface
-		199 = /dev/scanners/cuecat :CueCat barcode scanner
-		200 = /dev/net/tun	TAP/TUN network device
-		201 = /dev/button/gulpb	Transmeta GULP-B buttons
-		202 = /dev/emd/ctl	Enhanced Metadisk RAID (EMD) control
-		203 = /dev/cuse		Cuse (character device in user-space)
-		204 = /dev/video/em8300		EM8300 DVD decoder control
-		205 = /dev/video/em8300_mv	EM8300 DVD decoder video
-		206 = /dev/video/em8300_ma	EM8300 DVD decoder audio
-		207 = /dev/video/em8300_sp	EM8300 DVD decoder subpicture
-		208 = /dev/compaq/cpqphpc	Compaq PCI Hot Plug Controller
-		209 = /dev/compaq/cpqrid	Compaq Remote Insight Driver
-		210 = /dev/impi/bt	IMPI coprocessor block transfer
-		211 = /dev/impi/smic	IMPI coprocessor stream interface
-		212 = /dev/watchdogs/0	First watchdog device
-		213 = /dev/watchdogs/1	Second watchdog device
-		214 = /dev/watchdogs/2	Third watchdog device
-		215 = /dev/watchdogs/3	Fourth watchdog device
-		216 = /dev/fujitsu/apanel	Fujitsu/Siemens application panel
-		217 = /dev/ni/natmotn		National Instruments Motion
-		218 = /dev/kchuid	Inter-process chuid control
-		219 = /dev/modems/mwave	MWave modem firmware upload
-		220 = /dev/mptctl	Message passing technology (MPT) control
-		221 = /dev/mvista/hssdsi	Montavista PICMG hot swap system driver
-		222 = /dev/mvista/hasi		Montavista PICMG high availability
-		223 = /dev/input/uinput		User level driver support for input
-		224 = /dev/tpm		TCPA TPM driver
-		225 = /dev/pps		Pulse Per Second driver
-		226 = /dev/systrace	Systrace device
-		227 = /dev/mcelog	X86_64 Machine Check Exception driver
-		228 = /dev/hpet		HPET driver
-		229 = /dev/fuse		Fuse (virtual filesystem in user-space)
-		230 = /dev/midishare	MidiShare driver
-		231 = /dev/snapshot	System memory snapshot device
-		232 = /dev/kvm		Kernel-based virtual machine (hardware virtualization extensions)
-		233 = /dev/kmview	View-OS A process with a view
-		234 = /dev/btrfs-control	Btrfs control device
-		235 = /dev/autofs	Autofs control device
-		236 = /dev/mapper/control	Device-Mapper control device
-		237 = /dev/loop-control Loopback control device
-		238 = /dev/vhost-net	Host kernel accelerator for virtio net
-		239 = /dev/uhid		User-space I/O driver support for HID subsystem
-
-		240-254			Reserved for local use
-		255			Reserved for MISC_DYNAMIC_MINOR
-
-  11 char	Raw keyboard device	(Linux/SPARC only)
-		  0 = /dev/kbd		Raw keyboard device
-
-  11 char	Serial Mux device	(Linux/PA-RISC only)
-		  0 = /dev/ttyB0	First mux port
-		  1 = /dev/ttyB1	Second mux port
-		    ...
-
-  11 block	SCSI CD-ROM devices
-		  0 = /dev/scd0		First SCSI CD-ROM
-		  1 = /dev/scd1		Second SCSI CD-ROM
-		    ...
-
-		The prefix /dev/sr (instead of /dev/scd) has been deprecated.
-
-  12 char	QIC-02 tape
-		  2 = /dev/ntpqic11	QIC-11, no rewind-on-close
-		  3 = /dev/tpqic11	QIC-11, rewind-on-close
-		  4 = /dev/ntpqic24	QIC-24, no rewind-on-close
-		  5 = /dev/tpqic24	QIC-24, rewind-on-close
-		  6 = /dev/ntpqic120	QIC-120, no rewind-on-close
-		  7 = /dev/tpqic120	QIC-120, rewind-on-close
-		  8 = /dev/ntpqic150	QIC-150, no rewind-on-close
-		  9 = /dev/tpqic150	QIC-150, rewind-on-close
-
-		The device names specified are proposed -- if there
-		are "standard" names for these devices, please let me know.
-
-  12 block
-
-  13 char	Input core
-		  0 = /dev/input/js0	First joystick
-		  1 = /dev/input/js1	Second joystick
-		    ...
-		 32 = /dev/input/mouse0	First mouse
-		 33 = /dev/input/mouse1	Second mouse
-		    ...
-		 63 = /dev/input/mice	Unified mouse
-		 64 = /dev/input/event0	First event queue
-		 65 = /dev/input/event1	Second event queue
-		    ...
-
-		Each device type has 5 bits (32 minors).
-
-  13 block	Previously used for the XT disk (/dev/xdN)
-		Deleted in kernel v3.9.
-
-  14 char	Open Sound System (OSS)
-		  0 = /dev/mixer	Mixer control
-		  1 = /dev/sequencer	Audio sequencer
-		  2 = /dev/midi00	First MIDI port
-		  3 = /dev/dsp		Digital audio
-		  4 = /dev/audio	Sun-compatible digital audio
-		  6 =
-		  7 = /dev/audioctl	SPARC audio control device
-		  8 = /dev/sequencer2	Sequencer -- alternate device
-		 16 = /dev/mixer1	Second soundcard mixer control
-		 17 = /dev/patmgr0	Sequencer patch manager
-		 18 = /dev/midi01	Second MIDI port
-		 19 = /dev/dsp1		Second soundcard digital audio
-		 20 = /dev/audio1	Second soundcard Sun digital audio
-		 33 = /dev/patmgr1	Sequencer patch manager
-		 34 = /dev/midi02	Third MIDI port
-		 50 = /dev/midi03	Fourth MIDI port
-
-  14 block
-
-  15 char	Joystick
-		  0 = /dev/js0		First analog joystick
-		  1 = /dev/js1		Second analog joystick
-		    ...
-		128 = /dev/djs0		First digital joystick
-		129 = /dev/djs1		Second digital joystick
-		    ...
-  15 block	Sony CDU-31A/CDU-33A CD-ROM
-		  0 = /dev/sonycd	Sony CDU-31a CD-ROM
-
-  16 char	Non-SCSI scanners
-		  0 = /dev/gs4500	Genius 4500 handheld scanner
-
-  16 block	GoldStar CD-ROM
-		  0 = /dev/gscd		GoldStar CD-ROM
-
-  17 char	OBSOLETE (was Chase serial card)
-		  0 = /dev/ttyH0	First Chase port
-		  1 = /dev/ttyH1	Second Chase port
-		    ...
-  17 block	Optics Storage CD-ROM
-		  0 = /dev/optcd	Optics Storage CD-ROM
-
-  18 char	OBSOLETE (was Chase serial card - alternate devices)
-		  0 = /dev/cuh0		Callout device for ttyH0
-		  1 = /dev/cuh1		Callout device for ttyH1
-		    ...
-  18 block	Sanyo CD-ROM
-		  0 = /dev/sjcd		Sanyo CD-ROM
-
-  19 char	Cyclades serial card
-		  0 = /dev/ttyC0	First Cyclades port
-		    ...
-		 31 = /dev/ttyC31	32nd Cyclades port
-
-  19 block	"Double" compressed disk
-		  0 = /dev/double0	First compressed disk
-		    ...
-		  7 = /dev/double7	Eighth compressed disk
-		128 = /dev/cdouble0	Mirror of first compressed disk
-		    ...
-		135 = /dev/cdouble7	Mirror of eighth compressed disk
-
-		See the Double documentation for the meaning of the
-		mirror devices.
-
-  20 char	Cyclades serial card - alternate devices
-		  0 = /dev/cub0		Callout device for ttyC0
-		    ...
-		 31 = /dev/cub31	Callout device for ttyC31
-
-  20 block	Hitachi CD-ROM (under development)
-		  0 = /dev/hitcd	Hitachi CD-ROM
-
-  21 char	Generic SCSI access
-		  0 = /dev/sg0		First generic SCSI device
-		  1 = /dev/sg1		Second generic SCSI device
-		    ...
-
-		Most distributions name these /dev/sga, /dev/sgb...;
-		this sets an unnecessary limit of 26 SCSI devices in
-		the system and is counter to standard Linux
-		device-naming practice.
-
-  21 block	Acorn MFM hard drive interface
-		  0 = /dev/mfma		First MFM drive whole disk
-		 64 = /dev/mfmb		Second MFM drive whole disk
-
-		This device is used on the ARM-based Acorn RiscPC.
-		Partitions are handled the same way as for IDE disks
-		(see major number 3).
-
-  22 char	Digiboard serial card
-		  0 = /dev/ttyD0	First Digiboard port
-		  1 = /dev/ttyD1	Second Digiboard port
-		    ...
-  22 block	Second IDE hard disk/CD-ROM interface
-		  0 = /dev/hdc		Master: whole disk (or CD-ROM)
-		 64 = /dev/hdd		Slave: whole disk (or CD-ROM)
-
-		Partitions are handled the same way as for the first
-		interface (see major number 3).
-
-  23 char	Digiboard serial card - alternate devices
-		  0 = /dev/cud0		Callout device for ttyD0
-		  1 = /dev/cud1		Callout device for ttyD1
-		      ...
-  23 block	Mitsumi proprietary CD-ROM
-		  0 = /dev/mcd		Mitsumi CD-ROM
-
-  24 char	Stallion serial card
-		  0 = /dev/ttyE0	Stallion port 0 card 0
-		  1 = /dev/ttyE1	Stallion port 1 card 0
-		    ...
-		 64 = /dev/ttyE64	Stallion port 0 card 1
-		 65 = /dev/ttyE65	Stallion port 1 card 1
-		      ...
-		128 = /dev/ttyE128	Stallion port 0 card 2
-		129 = /dev/ttyE129	Stallion port 1 card 2
-		    ...
-		192 = /dev/ttyE192	Stallion port 0 card 3
-		193 = /dev/ttyE193	Stallion port 1 card 3
-		    ...
-  24 block	Sony CDU-535 CD-ROM
-		  0 = /dev/cdu535	Sony CDU-535 CD-ROM
-
-  25 char	Stallion serial card - alternate devices
-		  0 = /dev/cue0		Callout device for ttyE0
-		  1 = /dev/cue1		Callout device for ttyE1
-		    ...
-		 64 = /dev/cue64	Callout device for ttyE64
-		 65 = /dev/cue65	Callout device for ttyE65
-		    ...
-		128 = /dev/cue128	Callout device for ttyE128
-		129 = /dev/cue129	Callout device for ttyE129
-		    ...
-		192 = /dev/cue192	Callout device for ttyE192
-		193 = /dev/cue193	Callout device for ttyE193
-		      ...
-  25 block	First Matsushita (Panasonic/SoundBlaster) CD-ROM
-		  0 = /dev/sbpcd0	Panasonic CD-ROM controller 0 unit 0
-		  1 = /dev/sbpcd1	Panasonic CD-ROM controller 0 unit 1
-		  2 = /dev/sbpcd2	Panasonic CD-ROM controller 0 unit 2
-		  3 = /dev/sbpcd3	Panasonic CD-ROM controller 0 unit 3
-
-  26 char
-
-  26 block	Second Matsushita (Panasonic/SoundBlaster) CD-ROM
-		  0 = /dev/sbpcd4	Panasonic CD-ROM controller 1 unit 0
-		  1 = /dev/sbpcd5	Panasonic CD-ROM controller 1 unit 1
-		  2 = /dev/sbpcd6	Panasonic CD-ROM controller 1 unit 2
-		  3 = /dev/sbpcd7	Panasonic CD-ROM controller 1 unit 3
-
-  27 char	QIC-117 tape
-		  0 = /dev/qft0		Unit 0, rewind-on-close
-		  1 = /dev/qft1		Unit 1, rewind-on-close
-		  2 = /dev/qft2		Unit 2, rewind-on-close
-		  3 = /dev/qft3		Unit 3, rewind-on-close
-		  4 = /dev/nqft0	Unit 0, no rewind-on-close
-		  5 = /dev/nqft1	Unit 1, no rewind-on-close
-		  6 = /dev/nqft2	Unit 2, no rewind-on-close
-		  7 = /dev/nqft3	Unit 3, no rewind-on-close
-		 16 = /dev/zqft0	Unit 0, rewind-on-close, compression
-		 17 = /dev/zqft1	Unit 1, rewind-on-close, compression
-		 18 = /dev/zqft2	Unit 2, rewind-on-close, compression
-		 19 = /dev/zqft3	Unit 3, rewind-on-close, compression
-		 20 = /dev/nzqft0	Unit 0, no rewind-on-close, compression
-		 21 = /dev/nzqft1	Unit 1, no rewind-on-close, compression
-		 22 = /dev/nzqft2	Unit 2, no rewind-on-close, compression
-		 23 = /dev/nzqft3	Unit 3, no rewind-on-close, compression
-		 32 = /dev/rawqft0	Unit 0, rewind-on-close, no file marks
-		 33 = /dev/rawqft1	Unit 1, rewind-on-close, no file marks
-		 34 = /dev/rawqft2	Unit 2, rewind-on-close, no file marks
-		 35 = /dev/rawqft3	Unit 3, rewind-on-close, no file marks
-		 36 = /dev/nrawqft0	Unit 0, no rewind-on-close, no file marks
-		 37 = /dev/nrawqft1	Unit 1, no rewind-on-close, no file marks
-		 38 = /dev/nrawqft2	Unit 2, no rewind-on-close, no file marks
-		 39 = /dev/nrawqft3	Unit 3, no rewind-on-close, no file marks
-
-  27 block	Third Matsushita (Panasonic/SoundBlaster) CD-ROM
-		  0 = /dev/sbpcd8	Panasonic CD-ROM controller 2 unit 0
-		  1 = /dev/sbpcd9	Panasonic CD-ROM controller 2 unit 1
-		  2 = /dev/sbpcd10	Panasonic CD-ROM controller 2 unit 2
-		  3 = /dev/sbpcd11	Panasonic CD-ROM controller 2 unit 3
-
-  28 char	Stallion serial card - card programming
-		  0 = /dev/staliomem0	First Stallion card I/O memory
-		  1 = /dev/staliomem1	Second Stallion card I/O memory
-		  2 = /dev/staliomem2	Third Stallion card I/O memory
-		  3 = /dev/staliomem3	Fourth Stallion card I/O memory
-
-  28 char	Atari SLM ACSI laser printer (68k/Atari)
-		  0 = /dev/slm0		First SLM laser printer
-		  1 = /dev/slm1		Second SLM laser printer
-		    ...
-  28 block	Fourth Matsushita (Panasonic/SoundBlaster) CD-ROM
-		  0 = /dev/sbpcd12	Panasonic CD-ROM controller 3 unit 0
-		  1 = /dev/sbpcd13	Panasonic CD-ROM controller 3 unit 1
-		  2 = /dev/sbpcd14	Panasonic CD-ROM controller 3 unit 2
-		  3 = /dev/sbpcd15	Panasonic CD-ROM controller 3 unit 3
-
-  28 block	ACSI disk (68k/Atari)
-		  0 = /dev/ada		First ACSI disk whole disk
-		 16 = /dev/adb		Second ACSI disk whole disk
-		 32 = /dev/adc		Third ACSI disk whole disk
-		    ...
-		240 = /dev/adp		16th ACSI disk whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15, like SCSI.
-
-  29 char	Universal frame buffer
-		  0 = /dev/fb0		First frame buffer
-		  1 = /dev/fb1		Second frame buffer
-		    ...
-		 31 = /dev/fb31		32nd frame buffer
-
-  29 block	Aztech/Orchid/Okano/Wearnes CD-ROM
-		  0 = /dev/aztcd	Aztech CD-ROM
-
-  30 char	iBCS-2 compatibility devices
-		  0 = /dev/socksys	Socket access
-		  1 = /dev/spx		SVR3 local X interface
-		 32 = /dev/inet/ip	Network access
-		 33 = /dev/inet/icmp
-		 34 = /dev/inet/ggp
-		 35 = /dev/inet/ipip
-		 36 = /dev/inet/tcp
-		 37 = /dev/inet/egp
-		 38 = /dev/inet/pup
-		 39 = /dev/inet/udp
-		 40 = /dev/inet/idp
-		 41 = /dev/inet/rawip
-
-		Additionally, iBCS-2 requires the following links:
-
-		/dev/ip -> /dev/inet/ip
-		/dev/icmp -> /dev/inet/icmp
-		/dev/ggp -> /dev/inet/ggp
-		/dev/ipip -> /dev/inet/ipip
-		/dev/tcp -> /dev/inet/tcp
-		/dev/egp -> /dev/inet/egp
-		/dev/pup -> /dev/inet/pup
-		/dev/udp -> /dev/inet/udp
-		/dev/idp -> /dev/inet/idp
-		/dev/rawip -> /dev/inet/rawip
-		/dev/inet/arp -> /dev/inet/udp
-		/dev/inet/rip -> /dev/inet/udp
-		/dev/nfsd -> /dev/socksys
-		/dev/X0R -> /dev/null (? apparently not required ?)
-
-  30 block	Philips LMS CM-205 CD-ROM
-		  0 = /dev/cm205cd	Philips LMS CM-205 CD-ROM
-
-		/dev/lmscd is an older name for this device.  This
-		driver does not work with the CM-205MS CD-ROM.
-
-  31 char	MPU-401 MIDI
-		  0 = /dev/mpu401data	MPU-401 data port
-		  1 = /dev/mpu401stat	MPU-401 status port
-
-  31 block	ROM/flash memory card
-		  0 = /dev/rom0		First ROM card (rw)
-		      ...
-		  7 = /dev/rom7		Eighth ROM card (rw)
-		  8 = /dev/rrom0	First ROM card (ro)
-		    ...
-		 15 = /dev/rrom7	Eighth ROM card (ro)
-		 16 = /dev/flash0	First flash memory card (rw)
-		    ...
-		 23 = /dev/flash7	Eighth flash memory card (rw)
-		 24 = /dev/rflash0	First flash memory card (ro)
-		    ...
-		 31 = /dev/rflash7	Eighth flash memory card (ro)
-
-		The read-write (rw) devices support back-caching
-		written data in RAM, as well as writing to flash RAM
-		devices.  The read-only devices (ro) support reading
-		only.
-
-  32 char	Specialix serial card
-		  0 = /dev/ttyX0	First Specialix port
-		  1 = /dev/ttyX1	Second Specialix port
-		    ...
-  32 block	Philips LMS CM-206 CD-ROM
-		  0 = /dev/cm206cd	Philips LMS CM-206 CD-ROM
-
-  33 char	Specialix serial card - alternate devices
-		  0 = /dev/cux0		Callout device for ttyX0
-		  1 = /dev/cux1		Callout device for ttyX1
-		    ...
-  33 block	Third IDE hard disk/CD-ROM interface
-		  0 = /dev/hde		Master: whole disk (or CD-ROM)
-		 64 = /dev/hdf		Slave: whole disk (or CD-ROM)
-
-		Partitions are handled the same way as for the first
-		interface (see major number 3).
-
-  34 char	Z8530 HDLC driver
-		  0 = /dev/scc0		First Z8530, first port
-		  1 = /dev/scc1		First Z8530, second port
-		  2 = /dev/scc2		Second Z8530, first port
-		  3 = /dev/scc3		Second Z8530, second port
-		    ...
-
-		In a previous version these devices were named
-		/dev/sc1 for /dev/scc0, /dev/sc2 for /dev/scc1, and so
-		on.
-
-  34 block	Fourth IDE hard disk/CD-ROM interface
-		  0 = /dev/hdg		Master: whole disk (or CD-ROM)
-		 64 = /dev/hdh		Slave: whole disk (or CD-ROM)
-
-		Partitions are handled the same way as for the first
-		interface (see major number 3).
-
-  35 char	tclmidi MIDI driver
-		  0 = /dev/midi0	First MIDI port, kernel timed
-		  1 = /dev/midi1	Second MIDI port, kernel timed
-		  2 = /dev/midi2	Third MIDI port, kernel timed
-		  3 = /dev/midi3	Fourth MIDI port, kernel timed
-		 64 = /dev/rmidi0	First MIDI port, untimed
-		 65 = /dev/rmidi1	Second MIDI port, untimed
-		 66 = /dev/rmidi2	Third MIDI port, untimed
-		 67 = /dev/rmidi3	Fourth MIDI port, untimed
-		128 = /dev/smpte0	First MIDI port, SMPTE timed
-		129 = /dev/smpte1	Second MIDI port, SMPTE timed
-		130 = /dev/smpte2	Third MIDI port, SMPTE timed
-		131 = /dev/smpte3	Fourth MIDI port, SMPTE timed
-
-  35 block	Slow memory ramdisk
-		  0 = /dev/slram	Slow memory ramdisk
-
-  36 char	Netlink support
-		  0 = /dev/route	Routing, device updates, kernel to user
-		  1 = /dev/skip		enSKIP security cache control
-		  3 = /dev/fwmonitor	Firewall packet copies
-		 16 = /dev/tap0		First Ethertap device
-		    ...
-		 31 = /dev/tap15	16th Ethertap device
-
-  36 block	OBSOLETE (was MCA ESDI hard disk)
-
-  37 char	IDE tape
-		  0 = /dev/ht0		First IDE tape
-		  1 = /dev/ht1		Second IDE tape
-		    ...
-		128 = /dev/nht0		First IDE tape, no rewind-on-close
-		129 = /dev/nht1		Second IDE tape, no rewind-on-close
-		    ...
-
-		Currently, only one IDE tape drive is supported.
-
-  37 block	Zorro II ramdisk
-		  0 = /dev/z2ram	Zorro II ramdisk
-
-  38 char	Myricom PCI Myrinet board
-		  0 = /dev/mlanai0	First Myrinet board
-		  1 = /dev/mlanai1	Second Myrinet board
-		    ...
-
-		This device is used for status query, board control
-		and "user level packet I/O."  This board is also
-		accessible as a standard networking "eth" device.
-
-  38 block	OBSOLETE (was Linux/AP+)
-
-  39 char	ML-16P experimental I/O board
-		  0 = /dev/ml16pa-a0	First card, first analog channel
-		  1 = /dev/ml16pa-a1	First card, second analog channel
-		    ...
-		 15 = /dev/ml16pa-a15	First card, 16th analog channel
-		 16 = /dev/ml16pa-d	First card, digital lines
-		 17 = /dev/ml16pa-c0	First card, first counter/timer
-		 18 = /dev/ml16pa-c1	First card, second counter/timer
-		 19 = /dev/ml16pa-c2	First card, third counter/timer
-		 32 = /dev/ml16pb-a0	Second card, first analog channel
-		 33 = /dev/ml16pb-a1	Second card, second analog channel
-		    ...
-		 47 = /dev/ml16pb-a15	Second card, 16th analog channel
-		 48 = /dev/ml16pb-d	Second card, digital lines
-		 49 = /dev/ml16pb-c0	Second card, first counter/timer
-		 50 = /dev/ml16pb-c1	Second card, second counter/timer
-		 51 = /dev/ml16pb-c2	Second card, third counter/timer
-		      ...
-  39 block
-
-  40 char
-
-  40 block
-
-  41 char	Yet Another Micro Monitor
-		  0 = /dev/yamm		Yet Another Micro Monitor
-
-  41 block
-
-  42 char	Demo/sample use
-
-  42 block	Demo/sample use
-
-		This number is intended for use in sample code, as
-		well as a general "example" device number.  It
-		should never be used for a device driver that is being
-		distributed; either obtain an official number or use
-		the local/experimental range.  The sudden addition or
-		removal of a driver with this number should not cause
-		ill effects to the system (bugs excepted.)
-
-		IN PARTICULAR, ANY DISTRIBUTION WHICH CONTAINS A
-		DEVICE DRIVER USING MAJOR NUMBER 42 IS NONCOMPLIANT.
-
-  43 char	isdn4linux virtual modem
-		  0 = /dev/ttyI0	First virtual modem
-		    ...
-		 63 = /dev/ttyI63	64th virtual modem
-
-  43 block	Network block devices
-		  0 = /dev/nb0		First network block device
-		  1 = /dev/nb1		Second network block device
-		    ...
-
-		Network Block Device is somehow similar to loopback
-		devices: If you read from it, it sends packet across
-		network asking server for data. If you write to it, it
-		sends packet telling server to write. It could be used
-		to mounting filesystems over the net, swapping over
-		the net, implementing block device in userland etc.
-
-  44 char	isdn4linux virtual modem - alternate devices
-		  0 = /dev/cui0		Callout device for ttyI0
-		    ...
-		 63 = /dev/cui63	Callout device for ttyI63
-
-  44 block	Flash Translation Layer (FTL) filesystems
-		  0 = /dev/ftla		FTL on first Memory Technology Device
-		 16 = /dev/ftlb		FTL on second Memory Technology Device
-		 32 = /dev/ftlc		FTL on third Memory Technology Device
-		    ...
-		240 = /dev/ftlp		FTL on 16th Memory Technology Device
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the partition
-		limit is 15 rather than 63 per disk (same as SCSI.)
-
-  45 char	isdn4linux ISDN BRI driver
-		  0 = /dev/isdn0	First virtual B channel raw data
-		    ...
-		 63 = /dev/isdn63	64th virtual B channel raw data
-		 64 = /dev/isdnctrl0	First channel control/debug
-		    ...
-		127 = /dev/isdnctrl63	64th channel control/debug
-
-		128 = /dev/ippp0	First SyncPPP device
-		    ...
-		191 = /dev/ippp63	64th SyncPPP device
-
-		255 = /dev/isdninfo	ISDN monitor interface
-
-  45 block	Parallel port IDE disk devices
-		  0 = /dev/pda		First parallel port IDE disk
-		 16 = /dev/pdb		Second parallel port IDE disk
-		 32 = /dev/pdc		Third parallel port IDE disk
-		 48 = /dev/pdd		Fourth parallel port IDE disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the partition
-		limit is 15 rather than 63 per disk.
-
-  46 char	Comtrol Rocketport serial card
-		  0 = /dev/ttyR0	First Rocketport port
-		  1 = /dev/ttyR1	Second Rocketport port
-		    ...
-  46 block	Parallel port ATAPI CD-ROM devices
-		  0 = /dev/pcd0		First parallel port ATAPI CD-ROM
-		  1 = /dev/pcd1		Second parallel port ATAPI CD-ROM
-		  2 = /dev/pcd2		Third parallel port ATAPI CD-ROM
-		  3 = /dev/pcd3		Fourth parallel port ATAPI CD-ROM
-
-  47 char	Comtrol Rocketport serial card - alternate devices
-		  0 = /dev/cur0		Callout device for ttyR0
-		  1 = /dev/cur1		Callout device for ttyR1
-		    ...
-  47 block	Parallel port ATAPI disk devices
-		  0 = /dev/pf0		First parallel port ATAPI disk
-		  1 = /dev/pf1		Second parallel port ATAPI disk
-		  2 = /dev/pf2		Third parallel port ATAPI disk
-		  3 = /dev/pf3		Fourth parallel port ATAPI disk
-
-		This driver is intended for floppy disks and similar
-		devices and hence does not support partitioning.
-
-  48 char	SDL RISCom serial card
-		  0 = /dev/ttyL0	First RISCom port
-		  1 = /dev/ttyL1	Second RISCom port
-		    ...
-  48 block	Mylex DAC960 PCI RAID controller; first controller
-		  0 = /dev/rd/c0d0	First disk, whole disk
-		  8 = /dev/rd/c0d1	Second disk, whole disk
-		    ...
-		248 = /dev/rd/c0d31	32nd disk, whole disk
-
-		For partitions add:
-		  0 = /dev/rd/c?d?	Whole disk
-		  1 = /dev/rd/c?d?p1	First partition
-		    ...
-		  7 = /dev/rd/c?d?p7	Seventh partition
-
-  49 char	SDL RISCom serial card - alternate devices
-		  0 = /dev/cul0		Callout device for ttyL0
-		  1 = /dev/cul1		Callout device for ttyL1
-		    ...
-  49 block	Mylex DAC960 PCI RAID controller; second controller
-		  0 = /dev/rd/c1d0	First disk, whole disk
-		  8 = /dev/rd/c1d1	Second disk, whole disk
-		    ...
-		248 = /dev/rd/c1d31	32nd disk, whole disk
-
-		Partitions are handled as for major 48.
-
-  50 char	Reserved for GLINT
-
-  50 block	Mylex DAC960 PCI RAID controller; third controller
-		  0 = /dev/rd/c2d0	First disk, whole disk
-		  8 = /dev/rd/c2d1	Second disk, whole disk
-		    ...
-		248 = /dev/rd/c2d31	32nd disk, whole disk
-
-  51 char	Baycom radio modem OR Radio Tech BIM-XXX-RS232 radio modem
-		  0 = /dev/bc0		First Baycom radio modem
-		  1 = /dev/bc1		Second Baycom radio modem
-		    ...
-  51 block	Mylex DAC960 PCI RAID controller; fourth controller
-		  0 = /dev/rd/c3d0	First disk, whole disk
-		  8 = /dev/rd/c3d1	Second disk, whole disk
-		    ...
-		248 = /dev/rd/c3d31	32nd disk, whole disk
-
-		Partitions are handled as for major 48.
-
-  52 char	Spellcaster DataComm/BRI ISDN card
-		  0 = /dev/dcbri0	First DataComm card
-		  1 = /dev/dcbri1	Second DataComm card
-		  2 = /dev/dcbri2	Third DataComm card
-		  3 = /dev/dcbri3	Fourth DataComm card
-
-  52 block	Mylex DAC960 PCI RAID controller; fifth controller
-		  0 = /dev/rd/c4d0	First disk, whole disk
-		  8 = /dev/rd/c4d1	Second disk, whole disk
-		    ...
-		248 = /dev/rd/c4d31	32nd disk, whole disk
-
-		Partitions are handled as for major 48.
-
-  53 char	BDM interface for remote debugging MC683xx microcontrollers
-		  0 = /dev/pd_bdm0	PD BDM interface on lp0
-		  1 = /dev/pd_bdm1	PD BDM interface on lp1
-		  2 = /dev/pd_bdm2	PD BDM interface on lp2
-		  4 = /dev/icd_bdm0	ICD BDM interface on lp0
-		  5 = /dev/icd_bdm1	ICD BDM interface on lp1
-		  6 = /dev/icd_bdm2	ICD BDM interface on lp2
-
-		This device is used for the interfacing to the MC683xx
-		microcontrollers via Background Debug Mode by use of a
-		Parallel Port interface. PD is the Motorola Public
-		Domain Interface and ICD is the commercial interface
-		by P&E.
-
-  53 block	Mylex DAC960 PCI RAID controller; sixth controller
-		  0 = /dev/rd/c5d0	First disk, whole disk
-		  8 = /dev/rd/c5d1	Second disk, whole disk
-		    ...
-		248 = /dev/rd/c5d31	32nd disk, whole disk
-
-		Partitions are handled as for major 48.
-
-  54 char	Electrocardiognosis Holter serial card
-		  0 = /dev/holter0	First Holter port
-		  1 = /dev/holter1	Second Holter port
-		  2 = /dev/holter2	Third Holter port
-
-		A custom serial card used by Electrocardiognosis SRL
-		<mseritan@ottonel.pub.ro> to transfer data from Holter
-		24-hour heart monitoring equipment.
-
-  54 block	Mylex DAC960 PCI RAID controller; seventh controller
-		  0 = /dev/rd/c6d0	First disk, whole disk
-		  8 = /dev/rd/c6d1	Second disk, whole disk
-		    ...
-		248 = /dev/rd/c6d31	32nd disk, whole disk
-
-		Partitions are handled as for major 48.
-
-  55 char	DSP56001 digital signal processor
-		  0 = /dev/dsp56k	First DSP56001
-
-  55 block	Mylex DAC960 PCI RAID controller; eighth controller
-		  0 = /dev/rd/c7d0	First disk, whole disk
-		  8 = /dev/rd/c7d1	Second disk, whole disk
-		    ...
-		248 = /dev/rd/c7d31	32nd disk, whole disk
-
-		Partitions are handled as for major 48.
-
-  56 char	Apple Desktop Bus
-		  0 = /dev/adb		ADB bus control
-
-		Additional devices will be added to this number, all
-		starting with /dev/adb.
-
-  56 block	Fifth IDE hard disk/CD-ROM interface
-		  0 = /dev/hdi		Master: whole disk (or CD-ROM)
-		 64 = /dev/hdj		Slave: whole disk (or CD-ROM)
-
-		Partitions are handled the same way as for the first
-		interface (see major number 3).
-
-  57 char	Hayes ESP serial card
-		  0 = /dev/ttyP0	First ESP port
-		  1 = /dev/ttyP1	Second ESP port
-		    ...
-
-  57 block	Sixth IDE hard disk/CD-ROM interface
-		  0 = /dev/hdk		Master: whole disk (or CD-ROM)
-		 64 = /dev/hdl		Slave: whole disk (or CD-ROM)
-
-		Partitions are handled the same way as for the first
-		interface (see major number 3).
-
-  58 char	Hayes ESP serial card - alternate devices
-		  0 = /dev/cup0		Callout device for ttyP0
-		  1 = /dev/cup1		Callout device for ttyP1
-		    ...
-
-  58 block	Reserved for logical volume manager
-
-  59 char	sf firewall package
-		  0 = /dev/firewall	Communication with sf kernel module
-
-  59 block	Generic PDA filesystem device
-		  0 = /dev/pda0		First PDA device
-		  1 = /dev/pda1		Second PDA device
-		    ...
-
-		The pda devices are used to mount filesystems on
-		remote pda's (basically slow handheld machines with
-		proprietary OS's and limited memory and storage
-		running small fs translation drivers) through serial /
-		IRDA / parallel links.
-
-		NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc
-
-  60-63 char	LOCAL/EXPERIMENTAL USE
-
-  60-63 block	LOCAL/EXPERIMENTAL USE
-		Allocated for local/experimental use.  For devices not
-		assigned official numbers, these ranges should be
-		used in order to avoid conflicting with future assignments.
-
-  64 char	ENskip kernel encryption package
-		  0 = /dev/enskip	Communication with ENskip kernel module
-
-  64 block	Scramdisk/DriveCrypt encrypted devices
-		  0 = /dev/scramdisk/master    Master node for ioctls
-		  1 = /dev/scramdisk/1         First encrypted device
-		  2 = /dev/scramdisk/2         Second encrypted device
-		  ...
-		255 = /dev/scramdisk/255       255th encrypted device
-
-		The filename of the encrypted container and the passwords
-		are sent via ioctls (using the sdmount tool) to the master
-		node which then activates them via one of the
-		/dev/scramdisk/x nodes for loop mounting (all handled
-		through the sdmount tool).
-
-		Requested by: andy@scramdisklinux.org
-
-  65 char	Sundance "plink" Transputer boards (obsolete, unused)
-		  0 = /dev/plink0	First plink device
-		  1 = /dev/plink1	Second plink device
-		  2 = /dev/plink2	Third plink device
-		  3 = /dev/plink3	Fourth plink device
-		 64 = /dev/rplink0	First plink device, raw
-		 65 = /dev/rplink1	Second plink device, raw
-		 66 = /dev/rplink2	Third plink device, raw
-		 67 = /dev/rplink3	Fourth plink device, raw
-		128 = /dev/plink0d	First plink device, debug
-		129 = /dev/plink1d	Second plink device, debug
-		130 = /dev/plink2d	Third plink device, debug
-		131 = /dev/plink3d	Fourth plink device, debug
-		192 = /dev/rplink0d	First plink device, raw, debug
-		193 = /dev/rplink1d	Second plink device, raw, debug
-		194 = /dev/rplink2d	Third plink device, raw, debug
-		195 = /dev/rplink3d	Fourth plink device, raw, debug
-
-		This is a commercial driver; contact James Howes
-		<jth@prosig.demon.co.uk> for information.
-
-  65 block	SCSI disk devices (16-31)
-		  0 = /dev/sdq		17th SCSI disk whole disk
-		 16 = /dev/sdr		18th SCSI disk whole disk
-		 32 = /dev/sds		19th SCSI disk whole disk
-		    ...
-		240 = /dev/sdaf		32nd SCSI disk whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
-  66 char	YARC PowerPC PCI coprocessor card
-		  0 = /dev/yppcpci0	First YARC card
-		  1 = /dev/yppcpci1	Second YARC card
-		    ...
-
-  66 block	SCSI disk devices (32-47)
-		  0 = /dev/sdag		33th SCSI disk whole disk
-		 16 = /dev/sdah		34th SCSI disk whole disk
-		 32 = /dev/sdai		35th SCSI disk whole disk
-		    ...
-		240 = /dev/sdav		48nd SCSI disk whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
-  67 char	Coda network file system
-		  0 = /dev/cfs0		Coda cache manager
-
-		See http://www.coda.cs.cmu.edu for information about Coda.
-
-  67 block	SCSI disk devices (48-63)
-		  0 = /dev/sdaw		49th SCSI disk whole disk
-		 16 = /dev/sdax		50th SCSI disk whole disk
-		 32 = /dev/sday		51st SCSI disk whole disk
-		    ...
-		240 = /dev/sdbl		64th SCSI disk whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
-  68 char	CAPI 2.0 interface
-		  0 = /dev/capi20	Control device
-		  1 = /dev/capi20.00	First CAPI 2.0 application
-		  2 = /dev/capi20.01	Second CAPI 2.0 application
-		    ...
-		 20 = /dev/capi20.19	19th CAPI 2.0 application
-
-		ISDN CAPI 2.0 driver for use with CAPI 2.0
-		applications; currently supports the AVM B1 card.
-
-  68 block	SCSI disk devices (64-79)
-		  0 = /dev/sdbm		65th SCSI disk whole disk
-		 16 = /dev/sdbn		66th SCSI disk whole disk
-		 32 = /dev/sdbo		67th SCSI disk whole disk
-		    ...
-		240 = /dev/sdcb		80th SCSI disk whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
-  69 char	MA16 numeric accelerator card
-		  0 = /dev/ma16		Board memory access
-
-  69 block	SCSI disk devices (80-95)
-		  0 = /dev/sdcc		81st SCSI disk whole disk
-		 16 = /dev/sdcd		82nd SCSI disk whole disk
-		 32 = /dev/sdce		83th SCSI disk whole disk
-		    ...
-		240 = /dev/sdcr		96th SCSI disk whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
-  70 char	SpellCaster Protocol Services Interface
-		  0 = /dev/apscfg	Configuration interface
-		  1 = /dev/apsauth	Authentication interface
-		  2 = /dev/apslog	Logging interface
-		  3 = /dev/apsdbg	Debugging interface
-		 64 = /dev/apsisdn	ISDN command interface
-		 65 = /dev/apsasync	Async command interface
-		128 = /dev/apsmon	Monitor interface
-
-  70 block	SCSI disk devices (96-111)
-		  0 = /dev/sdcs		97th SCSI disk whole disk
-		 16 = /dev/sdct		98th SCSI disk whole disk
-		 32 = /dev/sdcu		99th SCSI disk whole disk
-		    ...
-		240 = /dev/sddh		112nd SCSI disk whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
-  71 char	Computone IntelliPort II serial card
-		  0 = /dev/ttyF0	IntelliPort II board 0, port 0
-		  1 = /dev/ttyF1	IntelliPort II board 0, port 1
-		    ...
-		 63 = /dev/ttyF63	IntelliPort II board 0, port 63
-		 64 = /dev/ttyF64	IntelliPort II board 1, port 0
-		 65 = /dev/ttyF65	IntelliPort II board 1, port 1
-		    ...
-		127 = /dev/ttyF127	IntelliPort II board 1, port 63
-		128 = /dev/ttyF128	IntelliPort II board 2, port 0
-		129 = /dev/ttyF129	IntelliPort II board 2, port 1
-		    ...
-		191 = /dev/ttyF191	IntelliPort II board 2, port 63
-		192 = /dev/ttyF192	IntelliPort II board 3, port 0
-		193 = /dev/ttyF193	IntelliPort II board 3, port 1
-		    ...
-		255 = /dev/ttyF255	IntelliPort II board 3, port 63
-
-  71 block	SCSI disk devices (112-127)
-		  0 = /dev/sddi		113th SCSI disk whole disk
-		 16 = /dev/sddj		114th SCSI disk whole disk
-		 32 = /dev/sddk		115th SCSI disk whole disk
-		    ...
-		240 = /dev/sddx		128th SCSI disk whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
-  72 char	Computone IntelliPort II serial card - alternate devices
-		  0 = /dev/cuf0		Callout device for ttyF0
-		  1 = /dev/cuf1		Callout device for ttyF1
-		    ...
-		 63 = /dev/cuf63	Callout device for ttyF63
-		 64 = /dev/cuf64	Callout device for ttyF64
-		 65 = /dev/cuf65	Callout device for ttyF65
-		    ...
-		127 = /dev/cuf127	Callout device for ttyF127
-		128 = /dev/cuf128	Callout device for ttyF128
-		129 = /dev/cuf129	Callout device for ttyF129
-		    ...
-		191 = /dev/cuf191	Callout device for ttyF191
-		192 = /dev/cuf192	Callout device for ttyF192
-		193 = /dev/cuf193	Callout device for ttyF193
-		    ...
-		255 = /dev/cuf255	Callout device for ttyF255
-
-  72 block	Compaq Intelligent Drive Array, first controller
-		  0 = /dev/ida/c0d0	First logical drive whole disk
-		 16 = /dev/ida/c0d1	Second logical drive whole disk
-		    ...
-		240 = /dev/ida/c0d15	16th logical drive whole disk
-
-		Partitions are handled the same way as for Mylex
-		DAC960 (see major number 48) except that the limit on
-		partitions is 15.
-
-  73 char	Computone IntelliPort II serial card - control devices
-		  0 = /dev/ip2ipl0	Loadware device for board 0
-		  1 = /dev/ip2stat0	Status device for board 0
-		  4 = /dev/ip2ipl1	Loadware device for board 1
-		  5 = /dev/ip2stat1	Status device for board 1
-		  8 = /dev/ip2ipl2	Loadware device for board 2
-		  9 = /dev/ip2stat2	Status device for board 2
-		 12 = /dev/ip2ipl3	Loadware device for board 3
-		 13 = /dev/ip2stat3	Status device for board 3
-
-  73 block	Compaq Intelligent Drive Array, second controller
-		  0 = /dev/ida/c1d0	First logical drive whole disk
-		 16 = /dev/ida/c1d1	Second logical drive whole disk
-		    ...
-		240 = /dev/ida/c1d15	16th logical drive whole disk
-
-		Partitions are handled the same way as for Mylex
-		DAC960 (see major number 48) except that the limit on
-		partitions is 15.
-
-  74 char	SCI bridge
-		  0 = /dev/SCI/0	SCI device 0
-		  1 = /dev/SCI/1	SCI device 1
-		    ...
-
-		Currently for Dolphin Interconnect Solutions' PCI-SCI
-		bridge.
-
-  74 block	Compaq Intelligent Drive Array, third controller
-		  0 = /dev/ida/c2d0	First logical drive whole disk
-		 16 = /dev/ida/c2d1	Second logical drive whole disk
-		    ...
-		240 = /dev/ida/c2d15	16th logical drive whole disk
-
-		Partitions are handled the same way as for Mylex
-		DAC960 (see major number 48) except that the limit on
-		partitions is 15.
-
-  75 char	Specialix IO8+ serial card
-		  0 = /dev/ttyW0	First IO8+ port, first card
-		  1 = /dev/ttyW1	Second IO8+ port, first card
-		    ...
-		  8 = /dev/ttyW8	First IO8+ port, second card
-		    ...
-
-  75 block	Compaq Intelligent Drive Array, fourth controller
-		  0 = /dev/ida/c3d0	First logical drive whole disk
-		 16 = /dev/ida/c3d1	Second logical drive whole disk
-		    ...
-		240 = /dev/ida/c3d15	16th logical drive whole disk
-
-		Partitions are handled the same way as for Mylex
-		DAC960 (see major number 48) except that the limit on
-		partitions is 15.
-
-  76 char	Specialix IO8+ serial card - alternate devices
-		  0 = /dev/cuw0		Callout device for ttyW0
-		  1 = /dev/cuw1		Callout device for ttyW1
-		    ...
-		  8 = /dev/cuw8		Callout device for ttyW8
-		    ...
-
-  76 block	Compaq Intelligent Drive Array, fifth controller
-		  0 = /dev/ida/c4d0	First logical drive whole disk
-		 16 = /dev/ida/c4d1	Second logical drive whole disk
-		    ...
-		240 = /dev/ida/c4d15	16th logical drive whole disk
-
-		Partitions are handled the same way as for Mylex
-		DAC960 (see major number 48) except that the limit on
-		partitions is 15.
-
-
-  77 char	ComScire Quantum Noise Generator
-		  0 = /dev/qng		ComScire Quantum Noise Generator
-
-  77 block	Compaq Intelligent Drive Array, sixth controller
-		  0 = /dev/ida/c5d0	First logical drive whole disk
-		 16 = /dev/ida/c5d1	Second logical drive whole disk
-		    ...
-		240 = /dev/ida/c5d15	16th logical drive whole disk
-
-		Partitions are handled the same way as for Mylex
-		DAC960 (see major number 48) except that the limit on
-		partitions is 15.
-
-  78 char	PAM Software's multimodem boards
-		  0 = /dev/ttyM0	First PAM modem
-		  1 = /dev/ttyM1	Second PAM modem
-		    ...
-
-  78 block	Compaq Intelligent Drive Array, seventh controller
-		  0 = /dev/ida/c6d0	First logical drive whole disk
-		 16 = /dev/ida/c6d1	Second logical drive whole disk
-		    ...
-		240 = /dev/ida/c6d15	16th logical drive whole disk
-
-		Partitions are handled the same way as for Mylex
-		DAC960 (see major number 48) except that the limit on
-		partitions is 15.
-
-  79 char	PAM Software's multimodem boards - alternate devices
-		  0 = /dev/cum0		Callout device for ttyM0
-		  1 = /dev/cum1		Callout device for ttyM1
-		    ...
-
-  79 block	Compaq Intelligent Drive Array, eighth controller
-		  0 = /dev/ida/c7d0	First logical drive whole disk
-		 16 = /dev/ida/c7d1	Second logical drive whole disk
-		    ...
-		240 = /dev/ida/c715	16th logical drive whole disk
-
-		Partitions are handled the same way as for Mylex
-		DAC960 (see major number 48) except that the limit on
-		partitions is 15.
-
-  80 char	Photometrics AT200 CCD camera
-		  0 = /dev/at200	Photometrics AT200 CCD camera
-
-  80 block	I2O hard disk
-		  0 = /dev/i2o/hda	First I2O hard disk, whole disk
-		 16 = /dev/i2o/hdb	Second I2O hard disk, whole disk
-		    ...
-		240 = /dev/i2o/hdp	16th I2O hard disk, whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
-  81 char	video4linux
-		  0 = /dev/video0	Video capture/overlay device
-		    ...
-		 63 = /dev/video63	Video capture/overlay device
-		 64 = /dev/radio0	Radio device
-		    ...
-		127 = /dev/radio63	Radio device
-		128 = /dev/swradio0	Software Defined Radio device
-		    ...
-		191 = /dev/swradio63	Software Defined Radio device
-		224 = /dev/vbi0		Vertical blank interrupt
-		    ...
-		255 = /dev/vbi31	Vertical blank interrupt
-
-		Minor numbers are allocated dynamically unless
-		CONFIG_VIDEO_FIXED_MINOR_RANGES (default n)
-		configuration option is set.
-
-  81 block	I2O hard disk
-		  0 = /dev/i2o/hdq	17th I2O hard disk, whole disk
-		 16 = /dev/i2o/hdr	18th I2O hard disk, whole disk
-		    ...
-		240 = /dev/i2o/hdaf	32nd I2O hard disk, whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
-  82 char	WiNRADiO communications receiver card
-		  0 = /dev/winradio0	First WiNRADiO card
-		  1 = /dev/winradio1	Second WiNRADiO card
-		    ...
-
-		The driver and documentation may be obtained from
-		http://www.winradio.com/
-
-  82 block	I2O hard disk
-		  0 = /dev/i2o/hdag	33rd I2O hard disk, whole disk
-		 16 = /dev/i2o/hdah	34th I2O hard disk, whole disk
-		    ...
-		240 = /dev/i2o/hdav	48th I2O hard disk, whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
-  83 char	Matrox mga_vid video driver
-		 0 = /dev/mga_vid0	1st video card
-		 1 = /dev/mga_vid1	2nd video card
-		 2 = /dev/mga_vid2	3rd video card
-		  ...
-		15 = /dev/mga_vid15	16th video card
-
-  83 block	I2O hard disk
-		  0 = /dev/i2o/hdaw	49th I2O hard disk, whole disk
-		 16 = /dev/i2o/hdax	50th I2O hard disk, whole disk
-		    ...
-		240 = /dev/i2o/hdbl	64th I2O hard disk, whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
-  84 char	Ikon 1011[57] Versatec Greensheet Interface
-		  0 = /dev/ihcp0	First Greensheet port
-		  1 = /dev/ihcp1	Second Greensheet port
-
-  84 block	I2O hard disk
-		  0 = /dev/i2o/hdbm	65th I2O hard disk, whole disk
-		 16 = /dev/i2o/hdbn	66th I2O hard disk, whole disk
-		    ...
-		240 = /dev/i2o/hdcb	80th I2O hard disk, whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
-  85 char	Linux/SGI shared memory input queue
-		  0 = /dev/shmiq	Master shared input queue
-		  1 = /dev/qcntl0	First device pushed
-		  2 = /dev/qcntl1	Second device pushed
-		    ...
-
-  85 block	I2O hard disk
-		  0 = /dev/i2o/hdcc	81st I2O hard disk, whole disk
-		 16 = /dev/i2o/hdcd	82nd I2O hard disk, whole disk
-		    ...
-		240 = /dev/i2o/hdcr	96th I2O hard disk, whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
-  86 char	SCSI media changer
-		  0 = /dev/sch0		First SCSI media changer
-		  1 = /dev/sch1		Second SCSI media changer
-		    ...
-
-  86 block	I2O hard disk
-		  0 = /dev/i2o/hdcs	97th I2O hard disk, whole disk
-		 16 = /dev/i2o/hdct	98th I2O hard disk, whole disk
-		    ...
-		240 = /dev/i2o/hddh	112th I2O hard disk, whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
-  87 char	Sony Control-A1 stereo control bus
-		  0 = /dev/controla0	First device on chain
-		  1 = /dev/controla1	Second device on chain
-		    ...
-
-  87 block	I2O hard disk
-		  0 = /dev/i2o/hddi	113rd I2O hard disk, whole disk
-		 16 = /dev/i2o/hddj	114th I2O hard disk, whole disk
-		    ...
-		240 = /dev/i2o/hddx	128th I2O hard disk, whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
-  88 char	COMX synchronous serial card
-		  0 = /dev/comx0	COMX channel 0
-		  1 = /dev/comx1	COMX channel 1
-		    ...
-
-  88 block	Seventh IDE hard disk/CD-ROM interface
-		  0 = /dev/hdm		Master: whole disk (or CD-ROM)
-		 64 = /dev/hdn		Slave: whole disk (or CD-ROM)
-
-		Partitions are handled the same way as for the first
-		interface (see major number 3).
-
-  89 char	I2C bus interface
-		  0 = /dev/i2c-0	First I2C adapter
-		  1 = /dev/i2c-1	Second I2C adapter
-		    ...
-
-  89 block	Eighth IDE hard disk/CD-ROM interface
-		  0 = /dev/hdo		Master: whole disk (or CD-ROM)
-		 64 = /dev/hdp		Slave: whole disk (or CD-ROM)
-
-		Partitions are handled the same way as for the first
-		interface (see major number 3).
-
-  90 char	Memory Technology Device (RAM, ROM, Flash)
-		  0 = /dev/mtd0		First MTD (rw)
-		  1 = /dev/mtdr0	First MTD (ro)
-		    ...
-		 30 = /dev/mtd15	16th MTD (rw)
-		 31 = /dev/mtdr15	16th MTD (ro)
-
-  90 block	Ninth IDE hard disk/CD-ROM interface
-		  0 = /dev/hdq		Master: whole disk (or CD-ROM)
-		 64 = /dev/hdr		Slave: whole disk (or CD-ROM)
-
-		Partitions are handled the same way as for the first
-		interface (see major number 3).
-
-  91 char	CAN-Bus devices
-		  0 = /dev/can0		First CAN-Bus controller
-		  1 = /dev/can1		Second CAN-Bus controller
-		    ...
-
-  91 block	Tenth IDE hard disk/CD-ROM interface
-		  0 = /dev/hds		Master: whole disk (or CD-ROM)
-		 64 = /dev/hdt		Slave: whole disk (or CD-ROM)
-
-		Partitions are handled the same way as for the first
-		interface (see major number 3).
-
-  92 char	Reserved for ith Kommunikationstechnik MIC ISDN card
-
-  92 block	PPDD encrypted disk driver
-		  0 = /dev/ppdd0	First encrypted disk
-		  1 = /dev/ppdd1	Second encrypted disk
-		    ...
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
-  93 char
-
-  93 block	NAND Flash Translation Layer filesystem
-		  0 = /dev/nftla	First NFTL layer
-		 16 = /dev/nftlb	Second NFTL layer
-		    ...
-		240 = /dev/nftlp	16th NTFL layer
-
-  94 char
-
-  94 block	IBM S/390 DASD block storage
-		  0 = /dev/dasda First DASD device, major
-		  1 = /dev/dasda1 First DASD device, block 1
-		  2 = /dev/dasda2 First DASD device, block 2
-		  3 = /dev/dasda3 First DASD device, block 3
-		  4 = /dev/dasdb Second DASD device, major
-		  5 = /dev/dasdb1 Second DASD device, block 1
-		  6 = /dev/dasdb2 Second DASD device, block 2
-		  7 = /dev/dasdb3 Second DASD device, block 3
-		    ...
-
-  95 char	IP filter
-		  0 = /dev/ipl		Filter control device/log file
-		  1 = /dev/ipnat	NAT control device/log file
-		  2 = /dev/ipstate	State information log file
-		  3 = /dev/ipauth	Authentication control device/log file
-		    ...
-
-  96 char	Parallel port ATAPI tape devices
-		  0 = /dev/pt0		First parallel port ATAPI tape
-		  1 = /dev/pt1		Second parallel port ATAPI tape
-		    ...
-		128 = /dev/npt0		First p.p. ATAPI tape, no rewind
-		129 = /dev/npt1		Second p.p. ATAPI tape, no rewind
-		    ...
-
-  96 block	Inverse NAND Flash Translation Layer
-		  0 = /dev/inftla First INFTL layer
-		 16 = /dev/inftlb Second INFTL layer
-		    ...
-		240 = /dev/inftlp	16th INTFL layer
-
-  97 char	Parallel port generic ATAPI interface
-		  0 = /dev/pg0		First parallel port ATAPI device
-		  1 = /dev/pg1		Second parallel port ATAPI device
-		  2 = /dev/pg2		Third parallel port ATAPI device
-		  3 = /dev/pg3		Fourth parallel port ATAPI device
-
-		These devices support the same API as the generic SCSI
-		devices.
-
-  98 char	Control and Measurement Device (comedi)
-		  0 = /dev/comedi0	First comedi device
-		  1 = /dev/comedi1	Second comedi device
-		    ...
-
-		See http://stm.lbl.gov/comedi.
-
-  98 block	User-mode virtual block device
-		  0 = /dev/ubda		First user-mode block device
-		 16 = /dev/udbb		Second user-mode block device
-		    ...
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
-		This device is used by the user-mode virtual kernel port.
-
-  99 char	Raw parallel ports
-		  0 = /dev/parport0	First parallel port
-		  1 = /dev/parport1	Second parallel port
-		    ...
-
-  99 block	JavaStation flash disk
-		  0 = /dev/jsfd		JavaStation flash disk
-
- 100 char	Telephony for Linux
-		  0 = /dev/phone0	First telephony device
-		  1 = /dev/phone1	Second telephony device
-		    ...
-
- 101 char	Motorola DSP 56xxx board
-		  0 = /dev/mdspstat	Status information
-		  1 = /dev/mdsp1	First DSP board I/O controls
-		    ...
-		 16 = /dev/mdsp16	16th DSP board I/O controls
-
- 101 block	AMI HyperDisk RAID controller
-		  0 = /dev/amiraid/ar0	First array whole disk
-		 16 = /dev/amiraid/ar1	Second array whole disk
-		    ...
-		240 = /dev/amiraid/ar15	16th array whole disk
-
-		For each device, partitions are added as:
-		  0 = /dev/amiraid/ar?	  Whole disk
-		  1 = /dev/amiraid/ar?p1  First partition
-		  2 = /dev/amiraid/ar?p2  Second partition
-		    ...
-		 15 = /dev/amiraid/ar?p15 15th partition
-
- 102 char
-
- 102 block	Compressed block device
-		  0 = /dev/cbd/a	First compressed block device, whole device
-		 16 = /dev/cbd/b	Second compressed block device, whole device
-		    ...
-		240 = /dev/cbd/p	16th compressed block device, whole device
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
- 103 char	Arla network file system
-		  0 = /dev/nnpfs0	First NNPFS device
-		  1 = /dev/nnpfs1	Second NNPFS device
-
-		Arla is a free clone of the Andrew File System, AFS.
-		The NNPFS device gives user mode filesystem
-		implementations a kernel presence for caching and easy
-		mounting.  For more information about the project,
-		write to <arla-drinkers@stacken.kth.se> or see
-		http://www.stacken.kth.se/project/arla/
-
- 103 block	Audit device
-		  0 = /dev/audit	Audit device
-
- 104 char	Flash BIOS support
-
- 104 block	Compaq Next Generation Drive Array, first controller
-		  0 = /dev/cciss/c0d0	First logical drive, whole disk
-		 16 = /dev/cciss/c0d1	Second logical drive, whole disk
-		    ...
-		240 = /dev/cciss/c0d15	16th logical drive, whole disk
-
-		Partitions are handled the same way as for Mylex
-		DAC960 (see major number 48) except that the limit on
-		partitions is 15.
-
- 105 char	Comtrol VS-1000 serial controller
-		  0 = /dev/ttyV0	First VS-1000 port
-		  1 = /dev/ttyV1	Second VS-1000 port
-		    ...
-
- 105 block	Compaq Next Generation Drive Array, second controller
-		  0 = /dev/cciss/c1d0	First logical drive, whole disk
-		 16 = /dev/cciss/c1d1	Second logical drive, whole disk
-		    ...
-		240 = /dev/cciss/c1d15	16th logical drive, whole disk
-
-		Partitions are handled the same way as for Mylex
-		DAC960 (see major number 48) except that the limit on
-		partitions is 15.
-
- 106 char	Comtrol VS-1000 serial controller - alternate devices
-		  0 = /dev/cuv0		First VS-1000 port
-		  1 = /dev/cuv1		Second VS-1000 port
-		    ...
-
- 106 block	Compaq Next Generation Drive Array, third controller
-		  0 = /dev/cciss/c2d0	First logical drive, whole disk
-		 16 = /dev/cciss/c2d1	Second logical drive, whole disk
-		    ...
-		240 = /dev/cciss/c2d15	16th logical drive, whole disk
-
-		Partitions are handled the same way as for Mylex
-		DAC960 (see major number 48) except that the limit on
-		partitions is 15.
-
- 107 char	3Dfx Voodoo Graphics device
-		  0 = /dev/3dfx		Primary 3Dfx graphics device
-
- 107 block	Compaq Next Generation Drive Array, fourth controller
-		  0 = /dev/cciss/c3d0	First logical drive, whole disk
-		 16 = /dev/cciss/c3d1	Second logical drive, whole disk
-		    ...
-		240 = /dev/cciss/c3d15	16th logical drive, whole disk
-
-		Partitions are handled the same way as for Mylex
-		DAC960 (see major number 48) except that the limit on
-		partitions is 15.
-
- 108 char	Device independent PPP interface
-		  0 = /dev/ppp		Device independent PPP interface
-
- 108 block	Compaq Next Generation Drive Array, fifth controller
-		  0 = /dev/cciss/c4d0	First logical drive, whole disk
-		 16 = /dev/cciss/c4d1	Second logical drive, whole disk
-		    ...
-		240 = /dev/cciss/c4d15	16th logical drive, whole disk
-
-		Partitions are handled the same way as for Mylex
-		DAC960 (see major number 48) except that the limit on
-		partitions is 15.
-
- 109 char	Reserved for logical volume manager
-
- 109 block	Compaq Next Generation Drive Array, sixth controller
-		  0 = /dev/cciss/c5d0	First logical drive, whole disk
-		 16 = /dev/cciss/c5d1	Second logical drive, whole disk
-		    ...
-		240 = /dev/cciss/c5d15	16th logical drive, whole disk
-
-		Partitions are handled the same way as for Mylex
-		DAC960 (see major number 48) except that the limit on
-		partitions is 15.
-
- 110 char	miroMEDIA Surround board
-		  0 = /dev/srnd0	First miroMEDIA Surround board
-		  1 = /dev/srnd1	Second miroMEDIA Surround board
-		    ...
-
- 110 block	Compaq Next Generation Drive Array, seventh controller
-		  0 = /dev/cciss/c6d0	First logical drive, whole disk
-		 16 = /dev/cciss/c6d1	Second logical drive, whole disk
-		    ...
-		240 = /dev/cciss/c6d15	16th logical drive, whole disk
-
-		Partitions are handled the same way as for Mylex
-		DAC960 (see major number 48) except that the limit on
-		partitions is 15.
-
- 111 char
-
- 111 block	Compaq Next Generation Drive Array, eighth controller
-		  0 = /dev/cciss/c7d0	First logical drive, whole disk
-		 16 = /dev/cciss/c7d1	Second logical drive, whole disk
-		    ...
-		240 = /dev/cciss/c7d15	16th logical drive, whole disk
-
-		Partitions are handled the same way as for Mylex
-		DAC960 (see major number 48) except that the limit on
-		partitions is 15.
-
- 112 char	ISI serial card
-		  0 = /dev/ttyM0	First ISI port
-		  1 = /dev/ttyM1	Second ISI port
-		    ...
-
-		There is currently a device-naming conflict between
-		these and PAM multimodems (major 78).
-
- 112 block	IBM iSeries virtual disk
-		  0 = /dev/iseries/vda	First virtual disk, whole disk
-		  8 = /dev/iseries/vdb	Second virtual disk, whole disk
-		    ...
-		200 = /dev/iseries/vdz	26th virtual disk, whole disk
-		208 = /dev/iseries/vdaa	27th virtual disk, whole disk
-		    ...
-		248 = /dev/iseries/vdaf	32nd virtual disk, whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 7.
-
- 113 char	ISI serial card - alternate devices
-		  0 = /dev/cum0		Callout device for ttyM0
-		  1 = /dev/cum1		Callout device for ttyM1
-		    ...
-
- 113 block	IBM iSeries virtual CD-ROM
-		  0 = /dev/iseries/vcda	First virtual CD-ROM
-		  1 = /dev/iseries/vcdb	Second virtual CD-ROM
-		    ...
-
- 114 char	Picture Elements ISE board
-		  0 = /dev/ise0		First ISE board
-		  1 = /dev/ise1		Second ISE board
-		    ...
-		128 = /dev/isex0	Control node for first ISE board
-		129 = /dev/isex1	Control node for second ISE board
-		    ...
-
-		The ISE board is an embedded computer, optimized for
-		image processing. The /dev/iseN nodes are the general
-		I/O access to the board, the /dev/isex0 nodes command
-		nodes used to control the board.
-
- 114 block       IDE BIOS powered software RAID interfaces such as the
-		Promise Fastrak
-
-		   0 = /dev/ataraid/d0
-		   1 = /dev/ataraid/d0p1
-		   2 = /dev/ataraid/d0p2
-		  ...
-		  16 = /dev/ataraid/d1
-		  17 = /dev/ataraid/d1p1
-		  18 = /dev/ataraid/d1p2
-		  ...
-		 255 = /dev/ataraid/d15p15
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
- 115 char	TI link cable devices (115 was formerly the console driver speaker)
-		  0 = /dev/tipar0    Parallel cable on first parallel port
-		  ...
-		  7 = /dev/tipar7    Parallel cable on seventh parallel port
-
-		  8 = /dev/tiser0    Serial cable on first serial port
-		  ...
-		 15 = /dev/tiser7    Serial cable on seventh serial port
-
-		 16 = /dev/tiusb0    First USB cable
-		  ...
-		 47 = /dev/tiusb31   32nd USB cable
-
- 115 block       NetWare (NWFS) Devices (0-255)
-
-		The NWFS (NetWare) devices are used to present a
-		collection of NetWare Mirror Groups or NetWare
-		Partitions as a logical storage segment for
-		use in mounting NetWare volumes.  A maximum of
-		 256 NetWare volumes can be supported in a single
-		machine.
-
-		http://cgfa.telepac.pt/ftp2/kernel.org/linux/kernel/people/jmerkey/nwfs/
-
-		 0 = /dev/nwfs/v0    First NetWare (NWFS) Logical Volume
-		 1 = /dev/nwfs/v1    Second NetWare (NWFS) Logical Volume
-		 2 = /dev/nwfs/v2    Third NetWare (NWFS) Logical Volume
-		      ...
-		 255 = /dev/nwfs/v255    Last NetWare (NWFS) Logical Volume
-
- 116 char	Advanced Linux Sound Driver (ALSA)
-
- 116 block       MicroMemory battery backed RAM adapter (NVRAM)
-		Supports 16 boards, 15 partitions each.
-		Requested by neilb at cse.unsw.edu.au.
-
-		 0 = /dev/umem/d0      Whole of first board
-		 1 = /dev/umem/d0p1    First partition of first board
-		 2 = /dev/umem/d0p2    Second partition of first board
-		15 = /dev/umem/d0p15   15th partition of first board
-
-		16 = /dev/umem/d1      Whole of second board
-		17 = /dev/umem/d1p1    First partition of second board
-		    ...
-		255= /dev/umem/d15p15  15th partition of 16th board.
-
- 117 char	COSA/SRP synchronous serial card
-		  0 = /dev/cosa0c0	1st board, 1st channel
-		  1 = /dev/cosa0c1	1st board, 2nd channel
-		    ...
-		 16 = /dev/cosa1c0	2nd board, 1st channel
-		 17 = /dev/cosa1c1	2nd board, 2nd channel
-		    ...
-
- 117 block       Enterprise Volume Management System (EVMS)
-
-		The EVMS driver uses a layered, plug-in model to provide
-		unparalleled flexibility and extensibility in managing
-		storage.  This allows for easy expansion or customization
-		of various levels of volume management.  Requested by
-		Mark Peloquin (peloquin at us.ibm.com).
-
-		Note: EVMS populates and manages all the devnodes in
-		/dev/evms.
-
-		http://sf.net/projects/evms
-
-		   0 = /dev/evms/block_device   EVMS block device
-		   1 = /dev/evms/legacyname1    First EVMS legacy device
-		   2 = /dev/evms/legacyname2    Second EVMS legacy device
-		    ...
-		    Both ranges can grow (down or up) until they meet.
-		    ...
-		 254 = /dev/evms/EVMSname2      Second EVMS native device
-		 255 = /dev/evms/EVMSname1      First EVMS native device
-
-		Note: legacyname(s) are derived from the normal legacy
-		device names.  For example, /dev/hda5 would become
-		/dev/evms/hda5.
-
- 118 char	IBM Cryptographic Accelerator
-		  0 = /dev/ica	Virtual interface to all IBM Crypto Accelerators
-		  1 = /dev/ica0	IBMCA Device 0
-		  2 = /dev/ica1	IBMCA Device 1
-		    ...
-
- 119 char	VMware virtual network control
-		  0 = /dev/vnet0	1st virtual network
-		  1 = /dev/vnet1	2nd virtual network
-		    ...
-
- 120-127 char	LOCAL/EXPERIMENTAL USE
-
- 120-127 block	LOCAL/EXPERIMENTAL USE
-		Allocated for local/experimental use.  For devices not
-		assigned official numbers, these ranges should be
-		used in order to avoid conflicting with future assignments.
-
- 128-135 char	Unix98 PTY masters
-
-		These devices should not have corresponding device
-		nodes; instead they should be accessed through the
-		/dev/ptmx cloning interface.
-
- 128 block       SCSI disk devices (128-143)
-		   0 = /dev/sddy         129th SCSI disk whole disk
-		  16 = /dev/sddz         130th SCSI disk whole disk
-		  32 = /dev/sdea         131th SCSI disk whole disk
-		    ...
-		 240 = /dev/sden         144th SCSI disk whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
- 129 block       SCSI disk devices (144-159)
-		   0 = /dev/sdeo         145th SCSI disk whole disk
-		  16 = /dev/sdep         146th SCSI disk whole disk
-		  32 = /dev/sdeq         147th SCSI disk whole disk
-		    ...
-		 240 = /dev/sdfd         160th SCSI disk whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
- 130 char 	(Misc devices)
-
- 130 block       SCSI disk devices (160-175)
-		   0 = /dev/sdfe         161st SCSI disk whole disk
-		  16 = /dev/sdff         162nd SCSI disk whole disk
-		  32 = /dev/sdfg         163rd SCSI disk whole disk
-		    ...
-		 240 = /dev/sdft         176th SCSI disk whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
- 131 block       SCSI disk devices (176-191)
-		   0 = /dev/sdfu         177th SCSI disk whole disk
-		  16 = /dev/sdfv         178th SCSI disk whole disk
-		  32 = /dev/sdfw         179th SCSI disk whole disk
-		    ...
-		 240 = /dev/sdgj         192nd SCSI disk whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
- 132 block       SCSI disk devices (192-207)
-		   0 = /dev/sdgk         193rd SCSI disk whole disk
-		  16 = /dev/sdgl         194th SCSI disk whole disk
-		  32 = /dev/sdgm         195th SCSI disk whole disk
-		    ...
-		 240 = /dev/sdgz         208th SCSI disk whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
- 133 block       SCSI disk devices (208-223)
-		   0 = /dev/sdha         209th SCSI disk whole disk
-		  16 = /dev/sdhb         210th SCSI disk whole disk
-		  32 = /dev/sdhc         211th SCSI disk whole disk
-		    ...
-		 240 = /dev/sdhp         224th SCSI disk whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
- 134 block       SCSI disk devices (224-239)
-		   0 = /dev/sdhq         225th SCSI disk whole disk
-		  16 = /dev/sdhr         226th SCSI disk whole disk
-		  32 = /dev/sdhs         227th SCSI disk whole disk
-		    ...
-		 240 = /dev/sdif         240th SCSI disk whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
- 135 block       SCSI disk devices (240-255)
-		   0 = /dev/sdig         241st SCSI disk whole disk
-		  16 = /dev/sdih         242nd SCSI disk whole disk
-		  32 = /dev/sdih         243rd SCSI disk whole disk
-		    ...
-		 240 = /dev/sdiv         256th SCSI disk whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
- 136-143 char	Unix98 PTY slaves
-		  0 = /dev/pts/0	First Unix98 pseudo-TTY
-		  1 = /dev/pts/1	Second Unix98 pseudo-TTY
-		    ...
-
-		These device nodes are automatically generated with
-		the proper permissions and modes by mounting the
-		devpts filesystem onto /dev/pts with the appropriate
-		mount options (distribution dependent, however, on
-		*most* distributions the appropriate options are
-		"mode=0620,gid=<gid of the "tty" group>".)
-
- 136 block	Mylex DAC960 PCI RAID controller; ninth controller
-		  0 = /dev/rd/c8d0	First disk, whole disk
-		  8 = /dev/rd/c8d1	Second disk, whole disk
-		    ...
-		248 = /dev/rd/c8d31	32nd disk, whole disk
-
-		Partitions are handled as for major 48.
-
- 137 block	Mylex DAC960 PCI RAID controller; tenth controller
-		  0 = /dev/rd/c9d0	First disk, whole disk
-		  8 = /dev/rd/c9d1	Second disk, whole disk
-		    ...
-		248 = /dev/rd/c9d31	32nd disk, whole disk
-
-		Partitions are handled as for major 48.
-
- 138 block	Mylex DAC960 PCI RAID controller; eleventh controller
-		  0 = /dev/rd/c10d0	First disk, whole disk
-		  8 = /dev/rd/c10d1	Second disk, whole disk
-		    ...
-		248 = /dev/rd/c10d31	32nd disk, whole disk
-
-		Partitions are handled as for major 48.
-
- 139 block	Mylex DAC960 PCI RAID controller; twelfth controller
-		  0 = /dev/rd/c11d0	First disk, whole disk
-		  8 = /dev/rd/c11d1	Second disk, whole disk
-		    ...
-		248 = /dev/rd/c11d31	32nd disk, whole disk
-
-		Partitions are handled as for major 48.
-
- 140 block	Mylex DAC960 PCI RAID controller; thirteenth controller
-		  0 = /dev/rd/c12d0	First disk, whole disk
-		  8 = /dev/rd/c12d1	Second disk, whole disk
-		    ...
-		248 = /dev/rd/c12d31	32nd disk, whole disk
-
-		Partitions are handled as for major 48.
-
- 141 block	Mylex DAC960 PCI RAID controller; fourteenth controller
-		  0 = /dev/rd/c13d0	First disk, whole disk
-		  8 = /dev/rd/c13d1	Second disk, whole disk
-		    ...
-		248 = /dev/rd/c13d31	32nd disk, whole disk
-
-		Partitions are handled as for major 48.
-
- 142 block	Mylex DAC960 PCI RAID controller; fifteenth controller
-		  0 = /dev/rd/c14d0	First disk, whole disk
-		  8 = /dev/rd/c14d1	Second disk, whole disk
-		    ...
-		248 = /dev/rd/c14d31	32nd disk, whole disk
-
-		Partitions are handled as for major 48.
-
- 143 block	Mylex DAC960 PCI RAID controller; sixteenth controller
-		  0 = /dev/rd/c15d0	First disk, whole disk
-		  8 = /dev/rd/c15d1	Second disk, whole disk
-		    ...
-		248 = /dev/rd/c15d31	32nd disk, whole disk
-
-		Partitions are handled as for major 48.
-
- 144 char	Encapsulated PPP
-		  0 = /dev/pppox0	First PPP over Ethernet
-		    ...
-		 63 = /dev/pppox63	64th PPP over Ethernet
-
-		This is primarily used for ADSL.
-
-		The SST 5136-DN DeviceNet interface driver has been
-		relocated to major 183 due to an unfortunate conflict.
-
- 144 block	Expansion Area #1 for more non-device (e.g. NFS) mounts
-		  0 = mounted device 256
-		255 = mounted device 511
-
- 145 char	SAM9407-based soundcard
-		  0 = /dev/sam0_mixer
-		  1 = /dev/sam0_sequencer
-		  2 = /dev/sam0_midi00
-		  3 = /dev/sam0_dsp
-		  4 = /dev/sam0_audio
-		  6 = /dev/sam0_sndstat
-		 18 = /dev/sam0_midi01
-		 34 = /dev/sam0_midi02
-		 50 = /dev/sam0_midi03
-		 64 = /dev/sam1_mixer
-		    ...
-		128 = /dev/sam2_mixer
-		    ...
-		192 = /dev/sam3_mixer
-		    ...
-
-		Device functions match OSS, but offer a number of
-		addons, which are sam9407 specific.  OSS can be
-		operated simultaneously, taking care of the codec.
-
- 145 block	Expansion Area #2 for more non-device (e.g. NFS) mounts
-		  0 = mounted device 512
-		255 = mounted device 767
-
- 146 char	SYSTRAM SCRAMNet mirrored-memory network
-		  0 = /dev/scramnet0	First SCRAMNet device
-		  1 = /dev/scramnet1	Second SCRAMNet device
-		    ...
-
- 146 block	Expansion Area #3 for more non-device (e.g. NFS) mounts
-		  0 = mounted device 768
-		255 = mounted device 1023
-
- 147 char	Aureal Semiconductor Vortex Audio device
-		  0 = /dev/aureal0	First Aureal Vortex
-		  1 = /dev/aureal1	Second Aureal Vortex
-		    ...
-
- 147 block	Distributed Replicated Block Device (DRBD)
-		  0 = /dev/drbd0	First DRBD device
-		  1 = /dev/drbd1	Second DRBD device
-		    ...
-
- 148 char	Technology Concepts serial card
-		  0 = /dev/ttyT0	First TCL port
-		  1 = /dev/ttyT1	Second TCL port
-		    ...
-
- 149 char	Technology Concepts serial card - alternate devices
-		  0 = /dev/cut0		Callout device for ttyT0
-		  1 = /dev/cut0		Callout device for ttyT1
-		    ...
-
- 150 char	Real-Time Linux FIFOs
-		  0 = /dev/rtf0		First RTLinux FIFO
-		  1 = /dev/rtf1		Second RTLinux FIFO
-		    ...
-
- 151 char	DPT I2O SmartRaid V controller
-		  0 = /dev/dpti0	First DPT I2O adapter
-		  1 = /dev/dpti1	Second DPT I2O adapter
-		    ...
-
- 152 char	EtherDrive Control Device
-		  0 = /dev/etherd/ctl	Connect/Disconnect an EtherDrive
-		  1 = /dev/etherd/err	Monitor errors
-		  2 = /dev/etherd/raw	Raw AoE packet monitor
-
- 152 block	EtherDrive Block Devices
-		  0 = /dev/etherd/0	EtherDrive 0
-		    ...
-		255 = /dev/etherd/255	EtherDrive 255
-
- 153 char	SPI Bus Interface (sometimes referred to as MicroWire)
-		  0 = /dev/spi0		First SPI device on the bus
-		  1 = /dev/spi1		Second SPI device on the bus
-		    ...
-		 15 = /dev/spi15	Sixteenth SPI device on the bus
-
- 153 block	Enhanced Metadisk RAID (EMD) storage units
-		  0 = /dev/emd/0	First unit
-		  1 = /dev/emd/0p1	Partition 1 on First unit
-		  2 = /dev/emd/0p2	Partition 2 on First unit
-		    ...
-		 15 = /dev/emd/0p15	Partition 15 on First unit
-
-		 16 = /dev/emd/1	Second unit
-		 32 = /dev/emd/2	Third unit
-		    ...
-		240 = /dev/emd/15	Sixteenth unit
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
- 154 char	Specialix RIO serial card
-		  0 = /dev/ttySR0	First RIO port
-		    ...
-		255 = /dev/ttySR255	256th RIO port
-
- 155 char	Specialix RIO serial card - alternate devices
-		  0 = /dev/cusr0	Callout device for ttySR0
-		    ...
-		255 = /dev/cusr255	Callout device for ttySR255
-
- 156 char	Specialix RIO serial card
-		  0 = /dev/ttySR256	257th RIO port
-		    ...
-		255 = /dev/ttySR511	512th RIO port
-
- 157 char	Specialix RIO serial card - alternate devices
-		  0 = /dev/cusr256	Callout device for ttySR256
-		    ...
-		255 = /dev/cusr511	Callout device for ttySR511
-
- 158 char	Dialogic GammaLink fax driver
-		  0 = /dev/gfax0	GammaLink channel 0
-		  1 = /dev/gfax1	GammaLink channel 1
-		    ...
-
- 159 char	RESERVED
-
- 159 block	RESERVED
-
- 160 char	General Purpose Instrument Bus (GPIB)
-		  0 = /dev/gpib0	First GPIB bus
-		  1 = /dev/gpib1	Second GPIB bus
-		    ...
-
- 160 block       Carmel 8-port SATA Disks on First Controller
-		  0 = /dev/carmel/0     SATA disk 0 whole disk
-		  1 = /dev/carmel/0p1   SATA disk 0 partition 1
-		    ...
-		 31 = /dev/carmel/0p31  SATA disk 0 partition 31
-
-		 32 = /dev/carmel/1     SATA disk 1 whole disk
-		 64 = /dev/carmel/2     SATA disk 2 whole disk
-		    ...
-		224 = /dev/carmel/7     SATA disk 7 whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 31.
-
- 161 char	IrCOMM devices (IrDA serial/parallel emulation)
-		  0 = /dev/ircomm0	First IrCOMM device
-		  1 = /dev/ircomm1	Second IrCOMM device
-		    ...
-		 16 = /dev/irlpt0	First IrLPT device
-		 17 = /dev/irlpt1	Second IrLPT device
-		    ...
-
- 161 block       Carmel 8-port SATA Disks on Second Controller
-		  0 = /dev/carmel/8     SATA disk 8 whole disk
-		  1 = /dev/carmel/8p1   SATA disk 8 partition 1
-		    ...
-		 31 = /dev/carmel/8p31  SATA disk 8 partition 31
-
-		 32 = /dev/carmel/9     SATA disk 9 whole disk
-		 64 = /dev/carmel/10    SATA disk 10 whole disk
-		    ...
-		224 = /dev/carmel/15    SATA disk 15 whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 31.
-
- 162 char	Raw block device interface
-		  0 = /dev/rawctl	Raw I/O control device
-		  1 = /dev/raw/raw1	First raw I/O device
-		  2 = /dev/raw/raw2	Second raw I/O device
-		    ...
-		 max minor number of raw device is set by kernel config
-		 MAX_RAW_DEVS or raw module parameter 'max_raw_devs'
-
- 163 char
-
- 164 char	Chase Research AT/PCI-Fast serial card
-		  0 = /dev/ttyCH0	AT/PCI-Fast board 0, port 0
-		    ...
-		 15 = /dev/ttyCH15	AT/PCI-Fast board 0, port 15
-		 16 = /dev/ttyCH16	AT/PCI-Fast board 1, port 0
-		    ...
-		 31 = /dev/ttyCH31	AT/PCI-Fast board 1, port 15
-		 32 = /dev/ttyCH32	AT/PCI-Fast board 2, port 0
-		    ...
-		 47 = /dev/ttyCH47	AT/PCI-Fast board 2, port 15
-		 48 = /dev/ttyCH48	AT/PCI-Fast board 3, port 0
-		    ...
-		 63 = /dev/ttyCH63	AT/PCI-Fast board 3, port 15
-
- 165 char	Chase Research AT/PCI-Fast serial card - alternate devices
-		  0 = /dev/cuch0	Callout device for ttyCH0
-		    ...
-		 63 = /dev/cuch63	Callout device for ttyCH63
-
- 166 char	ACM USB modems
-		  0 = /dev/ttyACM0	First ACM modem
-		  1 = /dev/ttyACM1	Second ACM modem
-		    ...
-
- 167 char	ACM USB modems - alternate devices
-		  0 = /dev/cuacm0	Callout device for ttyACM0
-		  1 = /dev/cuacm1	Callout device for ttyACM1
-		    ...
-
- 168 char	Eracom CSA7000 PCI encryption adaptor
-		  0 = /dev/ecsa0	First CSA7000
-		  1 = /dev/ecsa1	Second CSA7000
-		    ...
-
- 169 char	Eracom CSA8000 PCI encryption adaptor
-		  0 = /dev/ecsa8-0	First CSA8000
-		  1 = /dev/ecsa8-1	Second CSA8000
-		    ...
-
- 170 char	AMI MegaRAC remote access controller
-		  0 = /dev/megarac0	First MegaRAC card
-		  1 = /dev/megarac1	Second MegaRAC card
-		    ...
-
- 171 char	Reserved for IEEE 1394 (Firewire)
-
- 172 char	Moxa Intellio serial card
-		  0 = /dev/ttyMX0	First Moxa port
-		  1 = /dev/ttyMX1	Second Moxa port
-		    ...
-		127 = /dev/ttyMX127	128th Moxa port
-		128 = /dev/moxactl	Moxa control port
-
- 173 char	Moxa Intellio serial card - alternate devices
-		  0 = /dev/cumx0	Callout device for ttyMX0
-		  1 = /dev/cumx1	Callout device for ttyMX1
-		    ...
-		127 = /dev/cumx127	Callout device for ttyMX127
-
- 174 char	SmartIO serial card
-		  0 = /dev/ttySI0	First SmartIO port
-		  1 = /dev/ttySI1	Second SmartIO port
-		    ...
-
- 175 char	SmartIO serial card - alternate devices
-		  0 = /dev/cusi0	Callout device for ttySI0
-		  1 = /dev/cusi1	Callout device for ttySI1
-		    ...
-
- 176 char	nCipher nFast PCI crypto accelerator
-		  0 = /dev/nfastpci0	First nFast PCI device
-		  1 = /dev/nfastpci1	First nFast PCI device
-		    ...
-
- 177 char	TI PCILynx memory spaces
-		  0 = /dev/pcilynx/aux0	 AUX space of first PCILynx card
-		    ...
-		 15 = /dev/pcilynx/aux15 AUX space of 16th PCILynx card
-		 16 = /dev/pcilynx/rom0	 ROM space of first PCILynx card
-		    ...
-		 31 = /dev/pcilynx/rom15 ROM space of 16th PCILynx card
-		 32 = /dev/pcilynx/ram0	 RAM space of first PCILynx card
-		    ...
-		 47 = /dev/pcilynx/ram15 RAM space of 16th PCILynx card
-
- 178 char	Giganet cLAN1xxx virtual interface adapter
-		  0 = /dev/clanvi0	First cLAN adapter
-		  1 = /dev/clanvi1	Second cLAN adapter
-		    ...
-
- 179 block       MMC block devices
-		  0 = /dev/mmcblk0      First SD/MMC card
-		  1 = /dev/mmcblk0p1    First partition on first MMC card
-		  8 = /dev/mmcblk1      Second SD/MMC card
-		    ...
-
-		The start of next SD/MMC card can be configured with
-		CONFIG_MMC_BLOCK_MINORS, or overridden at boot/modprobe
-		time using the mmcblk.perdev_minors option. That would
-		bump the offset between each card to be the configured
-		value instead of the default 8.
-
- 179 char	CCube DVXChip-based PCI products
-		  0 = /dev/dvxirq0	First DVX device
-		  1 = /dev/dvxirq1	Second DVX device
-		    ...
-
- 180 char	USB devices
-		  0 = /dev/usb/lp0	First USB printer
-		    ...
-		 15 = /dev/usb/lp15	16th USB printer
-		 48 = /dev/usb/scanner0	First USB scanner
-		    ...
-		 63 = /dev/usb/scanner15 16th USB scanner
-		 64 = /dev/usb/rio500	Diamond Rio 500
-		 65 = /dev/usb/usblcd	USBLCD Interface (info@usblcd.de)
-		 66 = /dev/usb/cpad0	Synaptics cPad (mouse/LCD)
-		 96 = /dev/usb/hiddev0	1st USB HID device
-		    ...
-		111 = /dev/usb/hiddev15	16th USB HID device
-		112 = /dev/usb/auer0	1st auerswald ISDN device
-		    ...
-		127 = /dev/usb/auer15	16th auerswald ISDN device
-		128 = /dev/usb/brlvgr0	First Braille Voyager device
-		    ...
-		131 = /dev/usb/brlvgr3	Fourth Braille Voyager device
-		132 = /dev/usb/idmouse	ID Mouse (fingerprint scanner) device
-		133 = /dev/usb/sisusbvga1	First SiSUSB VGA device
-		    ...
-		140 = /dev/usb/sisusbvga8	Eighth SISUSB VGA device
-		144 = /dev/usb/lcd	USB LCD device
-		160 = /dev/usb/legousbtower0	1st USB Legotower device
-		    ...
-		175 = /dev/usb/legousbtower15	16th USB Legotower device
-		176 = /dev/usb/usbtmc1	First USB TMC device
-		   ...
-		191 = /dev/usb/usbtmc16	16th USB TMC device
-		192 = /dev/usb/yurex1	First USB Yurex device
-		   ...
-		209 = /dev/usb/yurex16	16th USB Yurex device
-
- 180 block	USB block devices
-		  0 = /dev/uba		First USB block device
-		  8 = /dev/ubb		Second USB block device
-		 16 = /dev/ubc		Third USB block device
-		    ...
-
- 181 char	Conrad Electronic parallel port radio clocks
-		  0 = /dev/pcfclock0	First Conrad radio clock
-		  1 = /dev/pcfclock1	Second Conrad radio clock
-		    ...
-
- 182 char	Picture Elements THR2 binarizer
-		  0 = /dev/pethr0	First THR2 board
-		  1 = /dev/pethr1	Second THR2 board
-		    ...
-
- 183 char	SST 5136-DN DeviceNet interface
-		  0 = /dev/ss5136dn0	First DeviceNet interface
-		  1 = /dev/ss5136dn1	Second DeviceNet interface
-		    ...
-
-		This device used to be assigned to major number 144.
-		It had to be moved due to an unfortunate conflict.
-
- 184 char	Picture Elements' video simulator/sender
-		  0 = /dev/pevss0	First sender board
-		  1 = /dev/pevss1	Second sender board
-		    ...
-
- 185 char	InterMezzo high availability file system
-		  0 = /dev/intermezzo0	First cache manager
-		  1 = /dev/intermezzo1	Second cache manager
-		    ...
-
-		See http://web.archive.org/web/20080115195241/
-		http://inter-mezzo.org/index.html
-
- 186 char	Object-based storage control device
-		  0 = /dev/obd0		First obd control device
-		  1 = /dev/obd1		Second obd control device
-		    ...
-
-		See ftp://ftp.lustre.org/pub/obd for code and information.
-
- 187 char	DESkey hardware encryption device
-		  0 = /dev/deskey0	First DES key
-		  1 = /dev/deskey1	Second DES key
-		    ...
-
- 188 char	USB serial converters
-		  0 = /dev/ttyUSB0	First USB serial converter
-		  1 = /dev/ttyUSB1	Second USB serial converter
-		    ...
-
- 189 char	USB serial converters - alternate devices
-		  0 = /dev/cuusb0	Callout device for ttyUSB0
-		  1 = /dev/cuusb1	Callout device for ttyUSB1
-		    ...
-
- 190 char	Kansas City tracker/tuner card
-		  0 = /dev/kctt0	First KCT/T card
-		  1 = /dev/kctt1	Second KCT/T card
-		    ...
-
- 191 char	Reserved for PCMCIA
-
- 192 char	Kernel profiling interface
-		  0 = /dev/profile	Profiling control device
-		  1 = /dev/profile0	Profiling device for CPU 0
-		  2 = /dev/profile1	Profiling device for CPU 1
-		    ...
-
- 193 char	Kernel event-tracing interface
-		  0 = /dev/trace	Tracing control device
-		  1 = /dev/trace0	Tracing device for CPU 0
-		  2 = /dev/trace1	Tracing device for CPU 1
-		    ...
-
- 194 char	linVideoStreams (LINVS)
-		  0 = /dev/mvideo/status0	Video compression status
-		  1 = /dev/mvideo/stream0	Video stream
-		  2 = /dev/mvideo/frame0	Single compressed frame
-		  3 = /dev/mvideo/rawframe0	Raw uncompressed frame
-		  4 = /dev/mvideo/codec0	Direct codec access
-		  5 = /dev/mvideo/video4linux0	Video4Linux compatibility
-
-		 16 = /dev/mvideo/status1	Second device
-		    ...
-		 32 = /dev/mvideo/status2	Third device
-		    ...
-		    ...
-		240 = /dev/mvideo/status15	16th device
-		    ...
-
- 195 char	Nvidia graphics devices
-		  0 = /dev/nvidia0		First Nvidia card
-		  1 = /dev/nvidia1		Second Nvidia card
-		    ...
-		255 = /dev/nvidiactl		Nvidia card control device
-
- 196 char	Tormenta T1 card
-		  0 = /dev/tor/0		Master control channel for all cards
-		  1 = /dev/tor/1		First DS0
-		  2 = /dev/tor/2		Second DS0
-		    ...
-		 48 = /dev/tor/48		48th DS0
-		 49 = /dev/tor/49		First pseudo-channel
-		 50 = /dev/tor/50		Second pseudo-channel
-		    ...
-
- 197 char	OpenTNF tracing facility
-		  0 = /dev/tnf/t0		Trace 0 data extraction
-		  1 = /dev/tnf/t1		Trace 1 data extraction
-		    ...
-		128 = /dev/tnf/status		Tracing facility status
-		130 = /dev/tnf/trace		Tracing device
-
- 198 char	Total Impact TPMP2 quad coprocessor PCI card
-		  0 = /dev/tpmp2/0		First card
-		  1 = /dev/tpmp2/1		Second card
-		    ...
-
- 199 char	Veritas volume manager (VxVM) volumes
-		  0 = /dev/vx/rdsk/*/*		First volume
-		  1 = /dev/vx/rdsk/*/*		Second volume
-		    ...
-
- 199 block	Veritas volume manager (VxVM) volumes
-		  0 = /dev/vx/dsk/*/*		First volume
-		  1 = /dev/vx/dsk/*/*		Second volume
-		    ...
-
-		The namespace in these directories is maintained by
-		the user space VxVM software.
-
- 200 char	Veritas VxVM configuration interface
-		   0 = /dev/vx/config		Configuration access node
-		   1 = /dev/vx/trace		Volume i/o trace access node
-		   2 = /dev/vx/iod		Volume i/o daemon access node
-		   3 = /dev/vx/info		Volume information access node
-		   4 = /dev/vx/task		Volume tasks access node
-		   5 = /dev/vx/taskmon		Volume tasks monitor daemon
-
- 201 char	Veritas VxVM dynamic multipathing driver
-		  0 = /dev/vx/rdmp/*		First multipath device
-		  1 = /dev/vx/rdmp/*		Second multipath device
-		    ...
- 201 block	Veritas VxVM dynamic multipathing driver
-		  0 = /dev/vx/dmp/*		First multipath device
-		  1 = /dev/vx/dmp/*		Second multipath device
-		    ...
-
-		The namespace in these directories is maintained by
-		the user space VxVM software.
-
- 202 char	CPU model-specific registers
-		  0 = /dev/cpu/0/msr		MSRs on CPU 0
-		  1 = /dev/cpu/1/msr		MSRs on CPU 1
-		    ...
-
- 202 block	Xen Virtual Block Device
-		  0 = /dev/xvda       First Xen VBD whole disk
-		  16 = /dev/xvdb      Second Xen VBD whole disk
-		  32 = /dev/xvdc      Third Xen VBD whole disk
-		    ...
-		  240 = /dev/xvdp     Sixteenth Xen VBD whole disk
-
-		Partitions are handled in the same way as for IDE
-		disks (see major number 3) except that the limit on
-		partitions is 15.
-
- 203 char	CPU CPUID information
-		  0 = /dev/cpu/0/cpuid		CPUID on CPU 0
-		  1 = /dev/cpu/1/cpuid		CPUID on CPU 1
-		    ...
-
- 204 char	Low-density serial ports
-		  0 = /dev/ttyLU0		LinkUp Systems L72xx UART - port 0
-		  1 = /dev/ttyLU1		LinkUp Systems L72xx UART - port 1
-		  2 = /dev/ttyLU2		LinkUp Systems L72xx UART - port 2
-		  3 = /dev/ttyLU3		LinkUp Systems L72xx UART - port 3
-		  4 = /dev/ttyFB0		Intel Footbridge (ARM)
-		  5 = /dev/ttySA0		StrongARM builtin serial port 0
-		  6 = /dev/ttySA1		StrongARM builtin serial port 1
-		  7 = /dev/ttySA2		StrongARM builtin serial port 2
-		  8 = /dev/ttySC0		SCI serial port (SuperH) - port 0
-		  9 = /dev/ttySC1		SCI serial port (SuperH) - port 1
-		 10 = /dev/ttySC2		SCI serial port (SuperH) - port 2
-		 11 = /dev/ttySC3		SCI serial port (SuperH) - port 3
-		 12 = /dev/ttyFW0		Firmware console - port 0
-		 13 = /dev/ttyFW1		Firmware console - port 1
-		 14 = /dev/ttyFW2		Firmware console - port 2
-		 15 = /dev/ttyFW3		Firmware console - port 3
-		 16 = /dev/ttyAM0		ARM "AMBA" serial port 0
-		    ...
-		 31 = /dev/ttyAM15		ARM "AMBA" serial port 15
-		 32 = /dev/ttyDB0		DataBooster serial port 0
-		    ...
-		 39 = /dev/ttyDB7		DataBooster serial port 7
-		 40 = /dev/ttySG0		SGI Altix console port
-		 41 = /dev/ttySMX0		Motorola i.MX - port 0
-		 42 = /dev/ttySMX1		Motorola i.MX - port 1
-		 43 = /dev/ttySMX2		Motorola i.MX - port 2
-		 44 = /dev/ttyMM0		Marvell MPSC - port 0
-		 45 = /dev/ttyMM1		Marvell MPSC - port 1
-		 46 = /dev/ttyCPM0		PPC CPM (SCC or SMC) - port 0
-		    ...
-		 47 = /dev/ttyCPM5		PPC CPM (SCC or SMC) - port 5
-		 50 = /dev/ttyIOC0		Altix serial card
-		    ...
-		 81 = /dev/ttyIOC31		Altix serial card
-		 82 = /dev/ttyVR0		NEC VR4100 series SIU
-		 83 = /dev/ttyVR1		NEC VR4100 series DSIU
-		 84 = /dev/ttyIOC84		Altix ioc4 serial card
-		    ...
-		 115 = /dev/ttyIOC115		Altix ioc4 serial card
-		 116 = /dev/ttySIOC0		Altix ioc3 serial card
-		    ...
-		 147 = /dev/ttySIOC31		Altix ioc3 serial card
-		 148 = /dev/ttyPSC0		PPC PSC - port 0
-		    ...
-		 153 = /dev/ttyPSC5		PPC PSC - port 5
-		 154 = /dev/ttyAT0		ATMEL serial port 0
-		    ...
-		 169 = /dev/ttyAT15		ATMEL serial port 15
-		 170 = /dev/ttyNX0		Hilscher netX serial port 0
-		    ...
-		 185 = /dev/ttyNX15		Hilscher netX serial port 15
-		 186 = /dev/ttyJ0		JTAG1 DCC protocol based serial port emulation
-		 187 = /dev/ttyUL0		Xilinx uartlite - port 0
-		    ...
-		 190 = /dev/ttyUL3		Xilinx uartlite - port 3
-		 191 = /dev/xvc0		Xen virtual console - port 0
-		 192 = /dev/ttyPZ0		pmac_zilog - port 0
-		    ...
-		 195 = /dev/ttyPZ3		pmac_zilog - port 3
-		 196 = /dev/ttyTX0		TX39/49 serial port 0
-		    ...
-		 204 = /dev/ttyTX7		TX39/49 serial port 7
-		 205 = /dev/ttySC0		SC26xx serial port 0
-		 206 = /dev/ttySC1		SC26xx serial port 1
-		 207 = /dev/ttySC2		SC26xx serial port 2
-		 208 = /dev/ttySC3		SC26xx serial port 3
-		 209 = /dev/ttyMAX0		MAX3100 serial port 0
-		 210 = /dev/ttyMAX1		MAX3100 serial port 1
-		 211 = /dev/ttyMAX2		MAX3100 serial port 2
-		 212 = /dev/ttyMAX3		MAX3100 serial port 3
-
- 205 char	Low-density serial ports (alternate device)
-		  0 = /dev/culu0		Callout device for ttyLU0
-		  1 = /dev/culu1		Callout device for ttyLU1
-		  2 = /dev/culu2		Callout device for ttyLU2
-		  3 = /dev/culu3		Callout device for ttyLU3
-		  4 = /dev/cufb0		Callout device for ttyFB0
-		  5 = /dev/cusa0		Callout device for ttySA0
-		  6 = /dev/cusa1		Callout device for ttySA1
-		  7 = /dev/cusa2		Callout device for ttySA2
-		  8 = /dev/cusc0		Callout device for ttySC0
-		  9 = /dev/cusc1		Callout device for ttySC1
-		 10 = /dev/cusc2		Callout device for ttySC2
-		 11 = /dev/cusc3		Callout device for ttySC3
-		 12 = /dev/cufw0		Callout device for ttyFW0
-		 13 = /dev/cufw1		Callout device for ttyFW1
-		 14 = /dev/cufw2		Callout device for ttyFW2
-		 15 = /dev/cufw3		Callout device for ttyFW3
-		 16 = /dev/cuam0		Callout device for ttyAM0
-		    ...
-		 31 = /dev/cuam15		Callout device for ttyAM15
-		 32 = /dev/cudb0		Callout device for ttyDB0
-		    ...
-		 39 = /dev/cudb7		Callout device for ttyDB7
-		 40 = /dev/cusg0		Callout device for ttySG0
-		 41 = /dev/ttycusmx0		Callout device for ttySMX0
-		 42 = /dev/ttycusmx1		Callout device for ttySMX1
-		 43 = /dev/ttycusmx2		Callout device for ttySMX2
-		 46 = /dev/cucpm0		Callout device for ttyCPM0
-		    ...
-		 49 = /dev/cucpm5		Callout device for ttyCPM5
-		 50 = /dev/cuioc40		Callout device for ttyIOC40
-		    ...
-		 81 = /dev/cuioc431		Callout device for ttyIOC431
-		 82 = /dev/cuvr0		Callout device for ttyVR0
-		 83 = /dev/cuvr1		Callout device for ttyVR1
-
- 206 char	OnStream SC-x0 tape devices
-		  0 = /dev/osst0		First OnStream SCSI tape, mode 0
-		  1 = /dev/osst1		Second OnStream SCSI tape, mode 0
-		    ...
-		 32 = /dev/osst0l		First OnStream SCSI tape, mode 1
-		 33 = /dev/osst1l		Second OnStream SCSI tape, mode 1
-		    ...
-		 64 = /dev/osst0m		First OnStream SCSI tape, mode 2
-		 65 = /dev/osst1m		Second OnStream SCSI tape, mode 2
-		    ...
-		 96 = /dev/osst0a		First OnStream SCSI tape, mode 3
-		 97 = /dev/osst1a		Second OnStream SCSI tape, mode 3
-		    ...
-		128 = /dev/nosst0		No rewind version of /dev/osst0
-		129 = /dev/nosst1		No rewind version of /dev/osst1
-		    ...
-		160 = /dev/nosst0l		No rewind version of /dev/osst0l
-		161 = /dev/nosst1l		No rewind version of /dev/osst1l
-		    ...
-		192 = /dev/nosst0m		No rewind version of /dev/osst0m
-		193 = /dev/nosst1m		No rewind version of /dev/osst1m
-		    ...
-		224 = /dev/nosst0a		No rewind version of /dev/osst0a
-		225 = /dev/nosst1a		No rewind version of /dev/osst1a
-		    ...
-
-		The OnStream SC-x0 SCSI tapes do not support the
-		standard SCSI SASD command set and therefore need
-		their own driver "osst". Note that the IDE, USB (and
-		maybe ParPort) versions may be driven via ide-scsi or
-		usb-storage SCSI emulation and this osst device and
-		driver as well.  The ADR-x0 drives are QIC-157
-		compliant and don't need osst.
-
- 207 char	Compaq ProLiant health feature indicate
-		  0 = /dev/cpqhealth/cpqw	Redirector interface
-		  1 = /dev/cpqhealth/crom	EISA CROM
-		  2 = /dev/cpqhealth/cdt	Data Table
-		  3 = /dev/cpqhealth/cevt	Event Log
-		  4 = /dev/cpqhealth/casr	Automatic Server Recovery
-		  5 = /dev/cpqhealth/cecc	ECC Memory
-		  6 = /dev/cpqhealth/cmca	Machine Check Architecture
-		  7 = /dev/cpqhealth/ccsm	Deprecated CDT
-		  8 = /dev/cpqhealth/cnmi	NMI Handling
-		  9 = /dev/cpqhealth/css	Sideshow Management
-		 10 = /dev/cpqhealth/cram	CMOS interface
-		 11 = /dev/cpqhealth/cpci	PCI IRQ interface
-
- 208 char	User space serial ports
-		  0 = /dev/ttyU0		First user space serial port
-		  1 = /dev/ttyU1		Second user space serial port
-		    ...
-
- 209 char	User space serial ports (alternate devices)
-		  0 = /dev/cuu0			Callout device for ttyU0
-		  1 = /dev/cuu1			Callout device for ttyU1
-		    ...
-
- 210 char	SBE, Inc. sync/async serial card
-		  0 = /dev/sbei/wxcfg0		Configuration device for board 0
-		  1 = /dev/sbei/dld0		Download device for board 0
-		  2 = /dev/sbei/wan00		WAN device, port 0, board 0
-		  3 = /dev/sbei/wan01		WAN device, port 1, board 0
-		  4 = /dev/sbei/wan02		WAN device, port 2, board 0
-		  5 = /dev/sbei/wan03		WAN device, port 3, board 0
-		  6 = /dev/sbei/wanc00		WAN clone device, port 0, board 0
-		  7 = /dev/sbei/wanc01		WAN clone device, port 1, board 0
-		  8 = /dev/sbei/wanc02		WAN clone device, port 2, board 0
-		  9 = /dev/sbei/wanc03		WAN clone device, port 3, board 0
-		 10 = /dev/sbei/wxcfg1		Configuration device for board 1
-		 11 = /dev/sbei/dld1		Download device for board 1
-		 12 = /dev/sbei/wan10		WAN device, port 0, board 1
-		 13 = /dev/sbei/wan11		WAN device, port 1, board 1
-		 14 = /dev/sbei/wan12		WAN device, port 2, board 1
-		 15 = /dev/sbei/wan13		WAN device, port 3, board 1
-		 16 = /dev/sbei/wanc10		WAN clone device, port 0, board 1
-		 17 = /dev/sbei/wanc11		WAN clone device, port 1, board 1
-		 18 = /dev/sbei/wanc12		WAN clone device, port 2, board 1
-		 19 = /dev/sbei/wanc13		WAN clone device, port 3, board 1
-		    ...
-
-		Yes, each board is really spaced 10 (decimal) apart.
-
- 211 char	Addinum CPCI1500 digital I/O card
-		  0 = /dev/addinum/cpci1500/0	First CPCI1500 card
-		  1 = /dev/addinum/cpci1500/1	Second CPCI1500 card
-		    ...
-
- 212 char	LinuxTV.org DVB driver subsystem
-		  0 = /dev/dvb/adapter0/video0    first video decoder of first card
-		  1 = /dev/dvb/adapter0/audio0    first audio decoder of first card
-		  2 = /dev/dvb/adapter0/sec0      (obsolete/unused)
-		  3 = /dev/dvb/adapter0/frontend0 first frontend device of first card
-		  4 = /dev/dvb/adapter0/demux0    first demux device of first card
-		  5 = /dev/dvb/adapter0/dvr0      first digital video recoder device of first card
-		  6 = /dev/dvb/adapter0/ca0       first common access port of first card
-		  7 = /dev/dvb/adapter0/net0      first network device of first card
-		  8 = /dev/dvb/adapter0/osd0      first on-screen-display device of first card
-		  9 = /dev/dvb/adapter0/video1    second video decoder of first card
-		    ...
-		 64 = /dev/dvb/adapter1/video0    first video decoder of second card
-		    ...
-		128 = /dev/dvb/adapter2/video0    first video decoder of third card
-		    ...
-		196 = /dev/dvb/adapter3/video0    first video decoder of fourth card
-
- 216 char	Bluetooth RFCOMM TTY devices
-		  0 = /dev/rfcomm0		First Bluetooth RFCOMM TTY device
-		  1 = /dev/rfcomm1		Second Bluetooth RFCOMM TTY device
-		    ...
-
- 217 char	Bluetooth RFCOMM TTY devices (alternate devices)
-		  0 = /dev/curf0		Callout device for rfcomm0
-		  1 = /dev/curf1		Callout device for rfcomm1
-		    ...
-
- 218 char	The Logical Company bus Unibus/Qbus adapters
-		  0 = /dev/logicalco/bci/0	First bus adapter
-		  1 = /dev/logicalco/bci/1	First bus adapter
-		    ...
-
- 219 char	The Logical Company DCI-1300 digital I/O card
-		  0 = /dev/logicalco/dci1300/0	First DCI-1300 card
-		  1 = /dev/logicalco/dci1300/1	Second DCI-1300 card
-		    ...
-
- 220 char	Myricom Myrinet "GM" board
-		  0 = /dev/myricom/gm0		First Myrinet GM board
-		  1 = /dev/myricom/gmp0		First board "root access"
-		  2 = /dev/myricom/gm1		Second Myrinet GM board
-		  3 = /dev/myricom/gmp1		Second board "root access"
-		    ...
-
- 221 char	VME bus
-		  0 = /dev/bus/vme/m0		First master image
-		  1 = /dev/bus/vme/m1		Second master image
-		  2 = /dev/bus/vme/m2		Third master image
-		  3 = /dev/bus/vme/m3		Fourth master image
-		  4 = /dev/bus/vme/s0		First slave image
-		  5 = /dev/bus/vme/s1		Second slave image
-		  6 = /dev/bus/vme/s2		Third slave image
-		  7 = /dev/bus/vme/s3		Fourth slave image
-		  8 = /dev/bus/vme/ctl		Control
-
-		It is expected that all VME bus drivers will use the
-		same interface.  For interface documentation see
-		http://www.vmelinux.org/.
-
- 224 char	A2232 serial card
-		  0 = /dev/ttyY0		First A2232 port
-		  1 = /dev/ttyY1		Second A2232 port
-		    ...
-
- 225 char	A2232 serial card (alternate devices)
-		  0 = /dev/cuy0			Callout device for ttyY0
-		  1 = /dev/cuy1			Callout device for ttyY1
-		    ...
-
- 226 char	Direct Rendering Infrastructure (DRI)
-		  0 = /dev/dri/card0		First graphics card
-		  1 = /dev/dri/card1		Second graphics card
-		    ...
-
- 227 char	IBM 3270 terminal Unix tty access
-		  1 = /dev/3270/tty1		First 3270 terminal
-		  2 = /dev/3270/tty2		Seconds 3270 terminal
-		    ...
-
- 228 char	IBM 3270 terminal block-mode access
-		  0 = /dev/3270/tub		Controlling interface
-		  1 = /dev/3270/tub1		First 3270 terminal
-		  2 = /dev/3270/tub2		Second 3270 terminal
-		    ...
-
- 229 char	IBM iSeries/pSeries virtual console
-		  0 = /dev/hvc0			First console port
-		  1 = /dev/hvc1			Second console port
-		    ...
-
- 230 char	IBM iSeries virtual tape
-		  0 = /dev/iseries/vt0		First virtual tape, mode 0
-		  1 = /dev/iseries/vt1		Second virtual tape, mode 0
-		    ...
-		 32 = /dev/iseries/vt0l		First virtual tape, mode 1
-		 33 = /dev/iseries/vt1l		Second virtual tape, mode 1
-		    ...
-		 64 = /dev/iseries/vt0m		First virtual tape, mode 2
-		 65 = /dev/iseries/vt1m		Second virtual tape, mode 2
-		    ...
-		 96 = /dev/iseries/vt0a		First virtual tape, mode 3
-		 97 = /dev/iseries/vt1a		Second virtual tape, mode 3
-		      ...
-		128 = /dev/iseries/nvt0		First virtual tape, mode 0, no rewind
-		129 = /dev/iseries/nvt1		Second virtual tape, mode 0, no rewind
-		    ...
-		160 = /dev/iseries/nvt0l	First virtual tape, mode 1, no rewind
-		161 = /dev/iseries/nvt1l	Second virtual tape, mode 1, no rewind
-		    ...
-		192 = /dev/iseries/nvt0m	First virtual tape, mode 2, no rewind
-		193 = /dev/iseries/nvt1m	Second virtual tape, mode 2, no rewind
-		    ...
-		224 = /dev/iseries/nvt0a	First virtual tape, mode 3, no rewind
-		225 = /dev/iseries/nvt1a	Second virtual tape, mode 3, no rewind
-		    ...
-
-		"No rewind" refers to the omission of the default
-		automatic rewind on device close.  The MTREW or MTOFFL
-		ioctl()'s can be used to rewind the tape regardless of
-		the device used to access it.
-
- 231 char	InfiniBand
-		0 = /dev/infiniband/umad0
-		1 = /dev/infiniband/umad1
-		  ...
-		63 = /dev/infiniband/umad63    63rd InfiniBandMad device
-		64 = /dev/infiniband/issm0     First InfiniBand IsSM device
-		65 = /dev/infiniband/issm1     Second InfiniBand IsSM device
-		  ...
-		127 = /dev/infiniband/issm63    63rd InfiniBand IsSM device
-		128 = /dev/infiniband/uverbs0   First InfiniBand verbs device
-		129 = /dev/infiniband/uverbs1   Second InfiniBand verbs device
-		  ...
-		159 = /dev/infiniband/uverbs31  31st InfiniBand verbs device
-
- 232 char	Biometric Devices
-		0 = /dev/biometric/sensor0/fingerprint	first fingerprint sensor on first device
-		1 = /dev/biometric/sensor0/iris		first iris sensor on first device
-		2 = /dev/biometric/sensor0/retina	first retina sensor on first device
-		3 = /dev/biometric/sensor0/voiceprint	first voiceprint sensor on first device
-		4 = /dev/biometric/sensor0/facial	first facial sensor on first device
-		5 = /dev/biometric/sensor0/hand		first hand sensor on first device
-		  ...
-		10 = /dev/biometric/sensor1/fingerprint	first fingerprint sensor on second device
-		  ...
-		20 = /dev/biometric/sensor2/fingerprint	first fingerprint sensor on third device
-		  ...
-
- 233 char	PathScale InfiniPath interconnect
-		0 = /dev/ipath        Primary device for programs (any unit)
-		1 = /dev/ipath0       Access specifically to unit 0
-		2 = /dev/ipath1       Access specifically to unit 1
-		  ...
-		4 = /dev/ipath3       Access specifically to unit 3
-		129 = /dev/ipath_sma    Device used by Subnet Management Agent
-		130 = /dev/ipath_diag   Device used by diagnostics programs
-
- 234-254	char	RESERVED FOR DYNAMIC ASSIGNMENT
-		Character devices that request a dynamic allocation of major number will
-		take numbers starting from 254 and downward.
-
- 240-254 block	LOCAL/EXPERIMENTAL USE
-		Allocated for local/experimental use.  For devices not
-		assigned official numbers, these ranges should be
-		used in order to avoid conflicting with future assignments.
-
- 255 char	RESERVED
-
- 255 block	RESERVED
-
-		This major is reserved to assist the expansion to a
-		larger number space.  No device nodes with this major
-		should ever be created on the filesystem.
-		(This is probably not true anymore, but I'll leave it
-		for now /Torben)
-
- ---LARGE MAJORS!!!!!---
-
- 256 char	Equinox SST multi-port serial boards
-		   0 = /dev/ttyEQ0	First serial port on first Equinox SST board
-		 127 = /dev/ttyEQ127	Last serial port on first Equinox SST board
-		 128 = /dev/ttyEQ128	First serial port on second Equinox SST board
-		  ...
-		1027 = /dev/ttyEQ1027	Last serial port on eighth Equinox SST board
-
- 256 block	Resident Flash Disk Flash Translation Layer
-		  0 = /dev/rfda		First RFD FTL layer
-		 16 = /dev/rfdb		Second RFD FTL layer
-		  ...
-		240 = /dev/rfdp		16th RFD FTL layer
-
- 257 char	Phoenix Technologies Cryptographic Services Driver
-		  0 = /dev/ptlsec	Crypto Services Driver
-
- 257 block	SSFDC Flash Translation Layer filesystem
-		  0 = /dev/ssfdca	First SSFDC layer
-		  8 = /dev/ssfdcb	Second SSFDC layer
-		 16 = /dev/ssfdcc	Third SSFDC layer
-		 24 = /dev/ssfdcd	4th SSFDC layer
-		 32 = /dev/ssfdce	5th SSFDC layer
-		 40 = /dev/ssfdcf	6th SSFDC layer
-		 48 = /dev/ssfdcg	7th SSFDC layer
-		 56 = /dev/ssfdch	8th SSFDC layer
-
- 258 block	ROM/Flash read-only translation layer
-		  0 = /dev/blockrom0	First ROM card's translation layer interface
-		  1 = /dev/blockrom1	Second ROM card's translation layer interface
-		  ...
-
- 259 block	Block Extended Major
-		  Used dynamically to hold additional partition minor
-		  numbers and allow large numbers of partitions per device
-
- 259 char	FPGA configuration interfaces
-		  0 = /dev/icap0	First Xilinx internal configuration
-		  1 = /dev/icap1	Second Xilinx internal configuration
-
- 260 char	OSD (Object-based-device) SCSI Device
-		  0 = /dev/osd0		First OSD Device
-		  1 = /dev/osd1		Second OSD Device
-		  ...
-		  255 = /dev/osd255	256th OSD Device
-
+.. include:: devices.txt
+   :literal:
 
 Additional ``/dev/`` directory entries
 --------------------------------------