Merge tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Nothing really major this release, despite quite a lot of activity.
  Just lots of things all over the place.

  Some things of note include:

   - Access via perf to a new type of PMU (IMC) on Power9, which can
     count both core events as well as nest unit events (Memory
     controller etc).

   - Optimisations to the radix MMU TLB flushing, mostly to avoid
     unnecessary Page Walk Cache (PWC) flushes when the structure of the
     tree is not changing.

   - Reworks/cleanups of do_page_fault() to modernise it and bring it
     closer to other architectures where possible.

   - Rework of our page table walking so that THP updates only need to
     send IPIs to CPUs where the affected mm has run, rather than all
     CPUs.

   - The size of our vmalloc area is increased to 56T on 64-bit hash MMU
     systems. This avoids problems with the percpu allocator on systems
     with very sparse NUMA layouts.

   - STRICT_KERNEL_RWX support on PPC32.

   - A new sched domain topology for Power9, to capture the fact that
     pairs of cores may share an L2 cache.

   - Power9 support for VAS, which is a new mechanism for accessing
     coprocessors, and initial support for using it with the NX
     compression accelerator.

   - Major work on the instruction emulation support, adding support for
     many new instructions, and reworking it so it can be used to
     implement the emulation needed to fixup alignment faults.

   - Support for guests under PowerVM to use the Power9 XIVE interrupt
     controller.

  And probably that many things again that are almost as interesting,
  but I had to keep the list short. Plus the usual fixes and cleanups as
  always.

  Thanks to: Alexey Kardashevskiy, Alistair Popple, Andreas Schwab,
  Aneesh Kumar K.V, Anju T Sudhakar, Arvind Yadav, Balbir Singh,
  Benjamin Herrenschmidt, Bhumika Goyal, Breno Leitao, Bryant G. Ly,
  Christophe Leroy, Cédric Le Goater, Dan Carpenter, Dou Liyang,
  Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Hannes
  Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall,
  LABBE Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring,
  Masahiro Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo,
  Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran,
  Paul Mackerras, Rashmica Gupta, Rob Herring, Rui Teng, Sam Bobroff,
  Santosh Sivaraj, Scott Wood, Shilpasri G Bhat, Sukadev Bhattiprolu,
  Suraj Jitindar Singh, Tobin C. Harding, Victor Aoqui"

* tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (321 commits)
  powerpc/xive: Fix section __init warning
  powerpc: Fix kernel crash in emulation of vector loads and stores
  powerpc/xive: improve debugging macros
  powerpc/xive: add XIVE Exploitation Mode to CAS
  powerpc/xive: introduce H_INT_ESB hcall
  powerpc/xive: add the HW IRQ number under xive_irq_data
  powerpc/xive: introduce xive_esb_write()
  powerpc/xive: rename xive_poke_esb() in xive_esb_read()
  powerpc/xive: guest exploitation of the XIVE interrupt controller
  powerpc/xive: introduce a common routine xive_queue_page_alloc()
  powerpc/sstep: Avoid used uninitialized error
  axonram: Return directly after a failed kzalloc() in axon_ram_probe()
  axonram: Improve a size determination in axon_ram_probe()
  axonram: Delete an error message for a failed memory allocation in axon_ram_probe()
  powerpc/powernv/npu: Move tlb flush before launching ATSD
  powerpc/macintosh: constify wf_sensor_ops structures
  powerpc/iommu: Use permission-specific DEVICE_ATTR variants
  powerpc/eeh: Delete an error out of memory message at init time
  powerpc/mm: Use seq_putc() in two functions
  macintosh: Convert to using %pOF instead of full_name
  ...

3 files changed, 94 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/ppc-memtrace b/Documentation/ABI/testing/ppc-memtrace
new file mode 100644
index 000000000000..2e8b93741270
--- /dev/null
+++ b/Documentation/ABI/testing/ppc-memtrace
@@ -0,0 +1,45 @@
+What:		/sys/kernel/debug/powerpc/memtrace
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	This folder contains the relevant debugfs files for the
+		hardware trace macro to use. CONFIG_PPC64_HARDWARE_TRACING
+		must be set.
+
+What:		/sys/kernel/debug/powerpc/memtrace/enable
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	Write an integer containing the size in bytes of the memory
+		you want removed from each NUMA node to this file - it must be
+		aligned to the memblock size. This amount of RAM will be removed
+		from the kernel mappings and the following debugfs files will be
+		created. This can only be successfully done once per boot. Once
+		memory is successfully removed from each node, the following
+		files are created.
+
+What:		/sys/kernel/debug/powerpc/memtrace/<node-id>
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	This directory contains information about the removed memory
+		from the specific NUMA node.
+
+What:		/sys/kernel/debug/powerpc/memtrace/<node-id>/size
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	This contains the size of the memory removed from the node.
+
+What:		/sys/kernel/debug/powerpc/memtrace/<node-id>/start
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	This contains the start address of the removed memory.
+
+What:		/sys/kernel/debug/powerpc/memtrace/<node-id>/trace
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	This is where the hardware trace macro will output the trace
+		it generates.
diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-powercap b/Documentation/ABI/testing/sysfs-firmware-opal-powercap
new file mode 100644
index 000000000000..c9b66ec4f165
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-opal-powercap
@@ -0,0 +1,31 @@
+What:		/sys/firmware/opal/powercap
+Date:		August 2017
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description:	Powercap directory for Powernv (P8, P9) servers
+
+		Each folder in this directory contains a
+		power-cappable component.
+
+What:		/sys/firmware/opal/powercap/system-powercap
+		/sys/firmware/opal/powercap/system-powercap/powercap-min
+		/sys/firmware/opal/powercap/system-powercap/powercap-max
+		/sys/firmware/opal/powercap/system-powercap/powercap-current
+Date:		August 2017
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description:	System powercap directory and attributes applicable for
+		Powernv (P8, P9) servers
+
+		This directory provides powercap information. It
+		contains below sysfs attributes:
+
+		- powercap-min : This file provides the minimum
+		  possible powercap in Watt units
+
+		- powercap-max : This file provides the maximum
+		  possible powercap in Watt units
+
+		- powercap-current : This file provides the current
+		  powercap set on the system. Writing to this file
+		  creates a request for setting a new-powercap. The
+		  powercap requested must be between powercap-min
+		  and powercap-max.
diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-psr b/Documentation/ABI/testing/sysfs-firmware-opal-psr
new file mode 100644
index 000000000000..cc2ece70e365
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-opal-psr
@@ -0,0 +1,18 @@
+What:		/sys/firmware/opal/psr
+Date:		August 2017
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description:	Power-Shift-Ratio directory for Powernv P9 servers
+
+		Power-Shift-Ratio allows to provide hints the firmware
+		to shift/throttle power between different entities in
+		the system. Each attribute in this directory indicates
+		a settable PSR.
+
+What:		/sys/firmware/opal/psr/cpu_to_gpu_X
+Date:		August 2017
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description:	PSR sysfs attributes for Powernv P9 servers
+
+		Power-Shift-Ratio between CPU and GPU for a given chip
+		with chip-id X. This file gives the ratio (0-100)
+		which is used by OCC for power-capping.