diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2018-06-08 20:39:20 +0300 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-06-08 20:39:20 +0300 |
| commit | f4e70c2e5f1406e715f6359ae341e76e5004fb98 (patch) | |
| tree | 79622d866d0cb8bdb494718e11d458770aee9713 | |
| parent | ea125dedbc14b305307889c40d74d564c4419851 (diff) | |
| parent | b771327a4530e7ff05ae173d4903cd70357bb803 (diff) | |
| download | linux-f4e70c2e5f1406e715f6359ae341e76e5004fb98.tar.xz | |
Merge tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd
Pull MTD updates from Boris Brezillon:
"Core changes:
- Add a sysfs attribute to expose available OOB size
Driver changes:
- Remove HAS_DMA dependency on various drivers
- Use dev_get_drvdata() instead of platform_get_drvdata() in docg3
- Replace msleep by usleep_range() in the dataflash driver
- Avoid VLA usage in nftl layers
- Remove useless .owner assignment in pismo
- Fix various issues in the CFI driver
- Improve TRX partition handling expose a DT compat for this part
parser
- Clarify OFFSET_CONTINUOUS meaning
NAND core changes:
- Add Miquel as a NAND maintainer
- Add access mode to the nand_page_io_req struct
- Fix kernel-doc in rawnand.h
- Support bit-wise majority to recover from corrupted ONFI parameter
pages
- Stop checking FAIL bit after a SET_FEATURES, as documented in the
ONFI spec
Raw NAND Driver changes:
- Fix and cleanup the error path of many NAND controller drivers
- GPMI:
+ Cleanup/simplification of a few aspects in the driver
+ Take ECC setup specified in the DT into account
- sunxi: remove support for GPIO-based R/B polling
- MTK:
+ Use of_device_get_match_data() instead of of_match_device()
+ Add an entry in MAINTAINERS for this driver
+ Fix nand-ecc-step-size and nand-ecc-strength description in the
DT bindings doc
- fsl_ifc: fix ->cmdfunc() to read more than one ONFI parameter page
OneNAND driver changes:
- samsung: use dev_get_drvdata() instead of platform_get_drvdata()
SPI NOR core changes:
- Add support for a bunch of SPI NOR chips
- Clear EAR reg when switching to 3-byte addressing mode on Winbond
chips
SPI NOR controller driver changes:
- cadence: Add DMA support for direct mode reads
- hisi: Prefix a few functions with hisi_
- intel:
+ Mark the driver as "dangerous" in Kconfig
+ Fix atomic sequence handling
+ Pass a 40us delay (instead of 0us) to readl_poll_timeout()
- fsl:
+ fix a typo in a function name
+ add support for IP variants embedded in the ls2080a and ls1080a
SoCs
- stm32: request exclusive control of the reset line"
* tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd: (66 commits)
mtd: nand: Pass mode information to nand_page_io_req
mtd: cfi_cmdset_0002: Change erase one block to enable XIP once
mtd: cfi_cmdset_0002: Change erase functions to check chip good only
mtd: cfi_cmdset_0002: Change erase functions to retry for error
mtd: cfi_cmdset_0002: Change definition naming to retry write operation
mtd: cfi_cmdset_0002: Change write buffer to check correct value
mtd: cmdlinepart: Update comment for introduction of OFFSET_CONTINUOUS
mtd: bcm47xxpart: add of_match_table with a new DT binding
dt-bindings: mtd: document Broadcom's BCM47xx partitions
mtd: spi-nor: Add support for EN25QH32
mtd: spi-nor: Add support for is25wp series chips
mtd: spi-nor: Add Winbond w25q32jv support
mtd: spi-nor: fsl-quadspi: add support for ls2080a/ls1080a
mtd: spi-nor: stm32-quadspi: explicitly request exclusive reset control
mtd: spi-nor: intel: provide a range for poll_timout
mtd: spi-nor: fsl-quadspi: fix api naming typo _init_ahb_read
mtd: spi-nor: intel-spi: Explicitly mark the driver as dangerous in Kconfig
mtd: spi-nor: intel-spi: Fix atomic sequence handling
mtd: rawnand: Do not check FAIL bit when executing a SET_FEATURES op
mtd: rawnand: use bit-wise majority to recover the ONFI param page
...
46 files changed, 773 insertions, 536 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd index f34e592301d1..3bc7c0a95c92 100644 --- a/Documentation/ABI/testing/sysfs-class-mtd +++ b/Documentation/ABI/testing/sysfs-class-mtd @@ -232,3 +232,11 @@ Description: of the parent (another partition or a flash device) in bytes. This attribute is absent on flash devices, so it can be used to distinguish them from partitions. + +What: /sys/class/mtd/mtdX/oobavail +Date: April 2018 +KernelVersion: 4.16 +Contact: linux-mtd@lists.infradead.org +Description: + Number of bytes available for a client to place data into + the out of band area. diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt index b289ef3c1b7e..393588385c6e 100644 --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt @@ -47,6 +47,11 @@ Optional properties: partitions written from Linux with this feature turned on may not be accessible by the BootROM code. + - nand-ecc-strength: integer representing the number of bits to correct + per ECC step. Needs to be a multiple of 2. + - nand-ecc-step-size: integer representing the number of data bytes + that are covered by a single ECC step. The driver + supports 512 and 1024. The device tree may optionally contain sub-nodes describing partitions of the address space. See partition.txt for more detail. diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt index c5ba6a4ba1f2..4d3ec5e4ff8a 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt +++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt @@ -48,14 +48,19 @@ Optional: - nand-on-flash-bbt: Store BBT on NAND Flash. - nand-ecc-mode: the NAND ecc mode (check driver for supported modes) - nand-ecc-step-size: Number of data bytes covered by a single ECC step. - valid values: 512 and 1024. + valid values: + 512 and 1024 on mt2701 and mt2712. + 512 only on mt7622. 1024 is recommended for large page NANDs. - nand-ecc-strength: Number of bits to correct per ECC step. - The valid values that the controller supports are: 4, 6, - 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36, 40, 44, - 48, 52, 56, 60. + The valid values that each controller supports: + mt2701: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, + 32, 36, 40, 44, 48, 52, 56, 60. + mt2712: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, + 32, 36, 40, 44, 48, 52, 56, 60, 68, 72, 80. + mt7622: 4, 6, 8, 10, 12, 14, 16. The strength should be calculated as follows: - E = (S - F) * 8 / 14 + E = (S - F) * 8 / B S = O / (P / Q) E : nand-ecc-strength. S : spare size per sector. @@ -64,6 +69,15 @@ Optional: O : oob size. P : page size. Q : nand-ecc-step-size. + B : number of parity bits needed to correct + 1 bitflip. + According to MTK NAND controller design, + this number depends on max ecc step size + that MTK NAND controller supports. + If max ecc step size supported is 1024, + then it should be always 14. And if max + ecc step size is 512, then it should be + always 13. If the result does not match any one of the listed choices above, please select the smaller valid value from the list. diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt index 36f3b769a626..a8f382642ba9 100644 --- a/Documentation/devicetree/bindings/mtd/partition.txt +++ b/Documentation/devicetree/bindings/mtd/partition.txt @@ -14,7 +14,7 @@ method is used for a given flash device. To describe the method there should be a subnode of the flash device that is named 'partitions'. It must have a 'compatible' property, which is used to identify the method to use. -We currently only document a binding for fixed layouts. +Available bindings are listed in the "partitions" subdirectory. Fixed Partitions diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.txt b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.txt new file mode 100644 index 000000000000..1d61a029395e --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.txt @@ -0,0 +1,42 @@ +Broadcom BCM47xx Partitions +=========================== + +Broadcom is one of hardware manufacturers providing SoCs (BCM47xx) used in +home routers. Their BCM947xx boards using CFE bootloader have several partitions +without any on-flash partition table. On some devices their sizes and/or +meanings can also vary so fixed partitioning can't be used. + +Discovering partitions on these devices is possible thanks to having a special +header and/or magic signature at the beginning of each of them. They are also +block aligned which is important for determinig a size. + +Most of partitions use ASCII text based magic for determining a type. More +complex partitions (like TRX with its HDR0 magic) may include extra header +containing some details, including a length. + +A list of supported partitions includes: +1) Bootloader with Broadcom's CFE (Common Firmware Environment) +2) NVRAM with configuration/calibration data +3) Device manufacturer's data with some default values (e.g. SSIDs) +4) TRX firmware container which can hold up to 4 subpartitions +5) Backup TRX firmware used after failed upgrade + +As mentioned earlier, role of some partitions may depend on extra configuration. +For example both: main firmware and backup firmware use the same TRX format with +the same header. To distinguish currently used firmware a CFE's environment +variable "bootpartition" is used. + + +Devices using Broadcom partitions described above should should have flash node +with a subnode named "partitions" using following properties: + +Required properties: +- compatible : (required) must be "brcm,bcm947xx-cfe-partitions" + +Example: + +flash@0 { + partitions { + compatible = "brcm,bcm947xx-cfe-partitions"; + }; +}; diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt index 0734f03bf3d3..dcd5a5d80dc0 100644 --- a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt @@ -22,8 +22,6 @@ Optional properties: - reset : phandle + reset specifier pair - reset-names : must contain "ahb" - allwinner,rb : shall contain the native Ready/Busy ids. - or -- rb-gpios : shall contain the gpios used as R/B pins. - nand-ecc-mode : one of the supported ECC modes ("hw", "soft", "soft_bch" or "none") diff --git a/MAINTAINERS b/MAINTAINERS index c9ac159fb023..3838c94a0d47 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9022,6 +9022,13 @@ L: linux-wireless@vger.kernel.org S: Maintained F: drivers/net/wireless/mediatek/mt7601u/ +MEDIATEK NAND CONTROLLER DRIVER +M: Xiaolei Li <xiaolei.li@mediatek.com> +L: linux-mtd@lists.infradead.org +S: Maintained +F: drivers/mtd/nand/raw/mtk_* +F: Documentation/devicetree/bindings/mtd/mtk-nand.txt + MEDIATEK RANDOM NUMBER GENERATOR SUPPORT M: Sean Wang <sean.wang@mediatek.com> S: Maintained @@ -9666,6 +9673,7 @@ F: drivers/net/ethernet/myricom/myri10ge/ NAND FLASH SUBSYSTEM M: Boris Brezillon <boris.brezillon@bootlin.com> +M: Miquel Raynal <miquel.raynal@bootlin.com> R: Richard Weinberger <richard@nod.at> L: linux-mtd@lists.infradead.org W: http://www.linux-mtd.infradead.org/ diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c index fe2581d9d882..0f93d2239352 100644 --- a/drivers/mtd/bcm47xxpart.c +++ b/drivers/mtd/bcm47xxpart.c @@ -186,6 +186,8 @@ static int bcm47xxpart_parse(struct mtd_info *master, /* TRX */ if (buf[0x000 / 4] == TRX_MAGIC) { struct trx_header *trx; + uint32_t last_subpart; + uint32_t trx_size; if (trx_num >= ARRAY_SIZE(trx_parts)) pr_warn("No enough space to store another TRX found at 0x%X\n", @@ -195,11 +197,23 @@ static int bcm47xxpart_parse(struct mtd_info *master, bcm47xxpart_add_part(&parts[curr_part++], "firmware", offset, 0); - /* Jump to the end of TRX */ + /* + * Try to find TRX size. The "length" field isn't fully + * reliable as it could be decreased to make CRC32 cover + * only part of TRX data. It's commonly used as checksum + * can't cover e.g. ever-changing rootfs partition. + * Use offsets as helpers for assuming min TRX size. + */ trx = (struct trx_header *)buf; - offset = roundup(offset + trx->length, blocksize); - /* Next loop iteration will increase the offset */ - offset -= blocksize; + last_subpart = max3(trx->offset[0], trx->offset[1], + trx->offset[2]); + trx_size = max(trx->length, last_subpart + blocksize); + + /* + * Skip the TRX data. Decrease offset by block size as + * the next loop iteration will increase it. + */ + offset += roundup(trx_size, blocksize) - blocksize; continue; } @@ -290,9 +304,16 @@ static int bcm47xxpart_parse(struct mtd_info *master, return curr_part; }; +static const struct of_device_id bcm47xxpart_of_match_table[] = { + { .compatible = "brcm,bcm947xx-cfe-partitions" }, + {}, +}; +MODULE_DEVICE_TABLE(of, bcm47xxpart_of_match_table); + static struct mtd_part_parser bcm47xxpart_mtd_parser = { .parse_fn = bcm47xxpart_parse, .name = "bcm47xxpart", + .of_match_table = bcm47xxpart_of_match_table, }; module_mtd_part_parser(bcm47xxpart_mtd_parser); diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 692902df2598..7c889eca9ab0 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -42,10 +42,10 @@ #define AMD_BOOTLOC_BUG #define FORCE_WORD_WRITE 0 -#define MAX_WORD_RETRIES 3 +#define MAX_RETRIES 3 -#define SST49LF004B 0x0060 -#define SST49LF040B 0x0050 +#define SST49LF004B 0x0060 +#define SST49LF040B 0x0050 #define SST49LF008A 0x005a #define AT49BV6416 0x00d6 @@ -207,7 +207,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd) struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; if (cfi->cfiq->BufWriteTimeoutTyp) { - pr_debug("Using buffer write method\n" ); + pr_debug("Using buffer write method\n"); mtd->_write = cfi_amdstd_write_buffers; } } @@ -1563,7 +1563,7 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, * depending of the conditions. The ' + 1' is to avoid having a * timeout of 0 jiffies if HZ is smaller than 1000. */ - unsigned long uWriteTimeout = ( HZ / 1000 ) + 1; + unsigned long uWriteTimeout = (HZ / 1000) + 1; int ret = 0; map_word oldd; int retry_cnt = 0; @@ -1578,7 +1578,7 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, } pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n", - __func__, adr, datum.x[0] ); + __func__, adr, datum.x[0]); if (mode == FL_OTP_WRITE) otp_enter(map, chip, adr, map_bankwidth(map)); @@ -1644,10 +1644,10 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, /* Did we succeed? */ if (!chip_good(map, adr, datum)) { /* reset on all failures. */ - map_write( map, CMD(0xF0), chip->start ); + map_write(map, CMD(0xF0), chip->start); /* FIXME - should have reset delay before continuing */ - if (++retry_cnt <= MAX_WORD_RETRIES) + if (++retry_cnt <= MAX_RETRIES) goto retry; ret = -EIO; @@ -1822,7 +1822,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, datum = map_word_load(map, buf); pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n", - __func__, adr, datum.x[0] ); + __func__, adr, datum.x[0]); XIP_INVAL_CACHED_RANGE(map, adr, len); ENABLE_VPP(map); @@ -1880,7 +1880,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, if (time_after(jiffies, timeo) && !chip_ready(map, adr)) break; - if (chip_ready(map, adr)) { + if (chip_good(map, adr, datum)) { xip_enable(map, chip, adr); goto op_done; } @@ -2106,7 +2106,7 @@ retry: map_write(map, CMD(0xF0), chip->start); /* FIXME - should have reset delay before continuing */ - if (++retry_cnt <= MAX_WORD_RETRIES) + if (++retry_cnt <= MAX_RETRIES) goto retry; ret = -EIO; @@ -2241,6 +2241,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip) unsigned long int adr; DECLARE_WAITQUEUE(wait, current); int ret = 0; + int retry_cnt = 0; adr = cfi->addr_unlock1; @@ -2252,12 +2253,13 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip) } pr_debug("MTD %s(): ERASE 0x%.8lx\n", - __func__, chip->start ); + __func__, chip->start); XIP_INVAL_CACHED_RANGE(map, adr, map->size); ENABLE_VPP(map); xip_disable(map, chip, adr); + retry: cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); @@ -2294,12 +2296,13 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip) chip->erase_suspended = 0; } - if (chip_ready(map, adr)) + if (chip_good(map, adr, map_word_ff(map))) break; if (time_after(jiffies, timeo)) { printk(KERN_WARNING "MTD %s(): software timeout\n", - __func__ ); + __func__); + ret = -EIO; break; } @@ -2307,12 +2310,15 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip) UDELAY(map, chip, adr, 1000000/HZ); } /* Did we succeed? */ - if (!chip_good(map, adr, map_word_ff(map))) { + if (ret) { /* reset on all failures. */ - map_write( map, CMD(0xF0), chip->start ); + map_write(map, CMD(0xF0), chip->start); /* FIXME - should have reset delay before continuing */ - ret = -EIO; + if (++retry_cnt <= MAX_RETRIES) { + ret = 0; + goto retry; + } } chip->state = FL_READY; @@ -2331,6 +2337,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, unsigned long timeo = jiffies + HZ; DECLARE_WAITQUEUE(wait, current); int ret = 0; + int retry_cnt = 0; adr += chip->start; @@ -2342,12 +2349,13 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, } pr_debug("MTD %s(): ERASE 0x%.8lx\n", - __func__, adr ); + __func__, adr); XIP_INVAL_CACHED_RANGE(map, adr, len); ENABLE_VPP(map); xip_disable(map, chip, adr); + retry: cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); @@ -2384,15 +2392,13 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, chip->erase_suspended = 0; } - if (chip_ready(map, adr)) { - xip_enable(map, chip, adr); + if (chip_good(map, adr, map_word_ff(map))) break; - } if (time_after(jiffies, timeo)) { - xip_enable(map, chip, adr); printk(KERN_WARNING "MTD %s(): software timeout\n", - __func__ ); + __func__); + ret = -EIO; break; } @@ -2400,15 +2406,19 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, UDELAY(map, chip, adr, 1000000/HZ); } /* Did we succeed? */ - if (!chip_good(map, adr, map_word_ff(map))) { + if (ret) { /* reset on all failures. */ - map_write( map, CMD(0xF0), chip->start ); + map_write(map, CMD(0xF0), chip->start); /* FIXME - should have reset delay before continuing */ - ret = -EIO; + if (++retry_cnt <= MAX_RETRIES) { + ret = 0; + goto retry; + } } chip->state = FL_READY; + xip_enable(map, chip, adr); DISABLE_VPP(map); put_chip(map, chip, adr); mutex_unlock(&chip->mutex); diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c index e8d0164498b0..cf426956454c 100644 --- a/drivers/mtd/chips/cfi_probe.c +++ b/drivers/mtd/chips/cfi_probe.c @@ -63,6 +63,30 @@ do { \ #endif +/* + * This fixup occurs immediately after reading the CFI structure and can affect + * the number of chips detected, unlike cfi_fixup, which occurs after an + * mtd_info structure has been created for the chip. + */ +struct cfi_early_fixup { + uint16_t mfr; + uint16_t id; + void (*fixup)(struct cfi_private *cfi); +}; + +static void cfi_early_fixup(struct cfi_private *cfi, + const struct cfi_early_fixup *fixups) +{ + const struct cfi_early_fixup *f; + + for (f = fixups; f->fixup; f++) { + if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi->mfr)) && + ((f->id == CFI_ID_ANY) || (f->id == cfi->id))) { + f->fixup(cfi); + } + } +} + /* check for QRY. in: interleave,type,mode ret: table index, <0 for error @@ -151,6 +175,22 @@ static int __xipram cfi_probe_chip(struct map_info *map, __u32 base, return 1; } +static void fixup_s70gl02gs_chips(struct cfi_private *cfi) +{ + /* + * S70GL02GS flash reports a single 256 MiB chip, but is really made up + * of two 128 MiB chips with 1024 sectors each. + */ + cfi->cfiq->DevSize = 27; + cfi->cfiq->EraseRegionInfo[0] = 0x20003ff; + pr_warn("Bad S70GL02GS CFI data; adjust to detect 2 chips\n"); +} + +static const struct cfi_early_fixup cfi_early_fixup_table[] = { + { CFI_MFR_AMD, 0x4801, fixup_s70gl02gs_chips }, + { }, +}; + static int __xipram cfi_chip_setup(struct map_info *map, struct cfi_private *cfi) { @@ -235,6 +275,8 @@ static int __xipram cfi_chip_setup(struct map_info *map, cfi_qry_mode_off(base, map, cfi); xip_allowed(base, map); + cfi_early_fixup(cfi, cfi_early_fixup_table); + printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank. Manufacturer ID %#08x Chip ID %#08x\n", map->name, cfi->interleave, cfi->device_type*8, base, map->bankwidth*8, cfi->mfr, cfi->id); diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c index fbd5affc0acf..3ea44cff9b75 100644 --- a/drivers/mtd/cmdlinepart.c +++ b/drivers/mtd/cmdlinepart.c @@ -190,7 +190,10 @@ static struct mtd_partition * newpart(char *s, extra_mem = (unsigned char *)(parts + *num_parts); } - /* enter this partition (offset will be calculated later if it is zero at this point) */ + /* + * enter this partition (offset will be calculated later if it is + * OFFSET_CONTINUOUS at this point) + */ parts[this_part].size = size; parts[this_part].offset = offset; parts[this_part].mask_flags = mask_flags; diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index c594fe5eac08..802d8f159e90 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -1470,8 +1470,7 @@ static struct docg3 *sysfs_dev2docg3(struct device *dev, struct device_attribute *attr) { int floor; - struct platform_device *pdev = to_platform_device(dev); - struct mtd_info **docg3_floors = platform_get_drvdata(pdev); + struct mtd_info **docg3_floors = dev_get_drvdata(dev); floor = attr->attr.name[1] - '0'; if (floor < 0 || floor >= DOC_MAX_NBFLOORS) diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index aaaeaae01e1d..3a6f450d1093 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -140,7 +140,7 @@ static int dataflash_waitready(struct spi_device *spi) if (status & (1 << 7)) /* RDY/nBSY */ return status; - msleep(3); + usleep_range(3000, 4000); } } diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c index aab4f68bd36f..2d598412972d 100644 --- a/drivers/mtd/inftlmount.c +++ b/drivers/mtd/inftlmount.c @@ -334,28 +334,37 @@ static int memcmpb(void *a, int c, int n) static int check_free_sectors(struct INFTLrecord *inftl, unsigned int address, int len, int check_oob) { - u8 buf[SECTORSIZE + inftl->mbd.mtd->oobsize]; struct mtd_info *mtd = inftl->mbd.mtd; size_t retlen; - int i; + int i, ret; + u8 *buf; + + buf = kmalloc(SECTORSIZE + mtd->oobsize, GFP_KERNEL); + if (!buf) + return -1; + ret = -1; for (i = 0; i < len; i += SECTORSIZE) { if (mtd_read(mtd, address, SECTORSIZE, &retlen, buf)) - return -1; + goto out; if (memcmpb(buf, 0xff, SECTORSIZE) != 0) - return -1; + goto out; if (check_oob) { if(inftl_read_oob(mtd, address, mtd->oobsize, &retlen, &buf[SECTORSIZE]) < 0) - return -1; + goto out; if (memcmpb(buf + SECTORSIZE, 0xff, mtd->oobsize) != 0) - return -1; + goto out; } address += SECTORSIZE; } - return 0; + ret = 0; + +out: + kfree(buf); + return ret; } /* diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c index dc6df9abea0b..c065d7995c0a 100644 --- a/drivers/mtd/maps/pismo.c +++ b/drivers/mtd/maps/pismo.c @@ -265,7 +265,6 @@ MODULE_DEVICE_TABLE(i2c, pismo_id); static struct i2c_driver pismo_driver = { .driver = { .name = "pismo", - .owner = THIS_MODULE, }, .probe = pismo_probe, .remove = pismo_remove, diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 64a1fcaafd9a..42395df06be9 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -210,6 +210,15 @@ static ssize_t mtd_oobsize_show(struct device *dev, } static DEVICE_ATTR(oobsize, S_IRUGO, mtd_oobsize_show, NULL); +static ssize_t mtd_oobavail_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct mtd_info *mtd = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%u\n", mtd->oobavail); +} +static DEVICE_ATTR(oobavail, S_IRUGO, mtd_oobavail_show, NULL); + static ssize_t mtd_numeraseregions_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -327,6 +336,7 @@ static struct attribute *mtd_attrs[] = { &dev_attr_writesize.attr, &dev_attr_subpagesize.attr, &dev_attr_oobsize.attr, + &dev_attr_oobavail.attr, &dev_attr_numeraseregions.attr, &dev_attr_name.attr, &dev_attr_ecc_strength.attr, @@ -690,7 +700,6 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types, const struct mtd_partition *parts, int nr_parts) { - struct mtd_partitions parsed = { }; int ret; mtd_set_dev_defaults(mtd); @@ -702,13 +711,10 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types, } /* Prefer parsed partitions over driver-provided fallback */ - ret = parse_mtd_partitions(mtd, types, &parsed, parser_data); - if (!ret && parsed.nr_parts) { - parts = parsed.parts; - nr_parts = parsed.nr_parts; - } - - if (nr_parts) + ret = parse_mtd_partitions(mtd, types, parser_data); + if (ret > 0) + ret = 0; + else if (nr_parts) ret = add_mtd_partitions(mtd, parts, nr_parts); else if (!device_is_registered(&mtd->dev)) ret = add_mtd_device(mtd); @@ -734,8 +740,6 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types, } out: - /* Cleanup any parsed partitions */ - mtd_part_parser_cleanup(&parsed); if (ret && device_is_registered(&mtd->dev)) del_mtd_device(mtd); diff --git a/drivers/mtd/mtdcore.h b/drivers/mtd/mtdcore.h index 37accfd0400e..9887bda317cd 100644 --- a/drivers/mtd/mtdcore.h +++ b/drivers/mtd/mtdcore.h @@ -15,7 +15,6 @@ int del_mtd_partitions(struct mtd_info *); struct mtd_partitions; int parse_mtd_partitions(struct mtd_info *master, const char * const *types, - struct mtd_partitions *pparts, struct mtd_part_parser_data *data); void mtd_part_parser_cleanup(struct mtd_partitions *parts); diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 023516a63276..f8d3a015cdad 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -335,20 +335,7 @@ static inline void free_partition(struct mtd_part *p) */ static int mtd_parse_part(struct mtd_part *slave, const char *const *types) { - struct mtd_partitions parsed; - int err; - - err = parse_mtd_partitions(&slave->mtd, types, &parsed, NULL); - if (err) - return err; - else if (!parsed.nr_parts) - return -ENOENT; - - err = add_mtd_partitions(&slave->mtd, parsed.parts, parsed.nr_parts); - - mtd_part_parser_cleanup(&parsed); - - return err; + return parse_mtd_partitions(&slave->mtd, types, NULL); } static struct mtd_part *allocate_partition(struct mtd_info *parent, @@ -933,30 +920,27 @@ static int mtd_part_of_parse(struct mtd_info *master, } /** - * parse_mtd_partitions - parse MTD partitions + * parse_mtd_partitions - parse and register MTD partitions + * * @master: the master partition (describes whole MTD device) * @types: names of partition parsers to try or %NULL - * @pparts: info about partitions found is returned here * @data: MTD partition parser-specific data * - * This function tries to find partition on MTD device @master. It uses MTD - * partition parsers, specified in @types. However, if @types is %NULL, then - * the default list of parsers is used. The default list contains only the + * This function tries to find & register partitions on MTD device @master. It + * uses MTD partition parsers, specified in @types. However, if @types is %NULL, + * then the default list of parsers is used. The default list contains only the * "cmdlinepart" and "ofpart" parsers ATM. * Note: If there are more then one parser in @types, the kernel only takes the * partitions parsed out by the first parser. * * This function may return: * o a negative error code in case of failure - * o zero otherwise, and @pparts will describe the partitions, number of - * partitions, and the parser which parsed them. Caller must release - * resources with mtd_part_parser_cleanup() when finished with the returned - * data. + * o number of found partitions otherwise */ int parse_mtd_partitions(struct mtd_info *master, const char *const *types, - struct mtd_partitions *pparts, struct mtd_part_parser_data *data) { + struct mtd_partitions pparts = { }; struct mtd_part_parser *parser; int ret, err = 0; @@ -970,7 +954,7 @@ int parse_mtd_partitions(struct mtd_info *master, const char *const *types, * handled in a separated function. */ if (!strcmp(*types, "ofpart")) { - ret = mtd_part_of_parse(master, pparts); + ret = mtd_part_of_parse(master, &pparts); } else { pr_debug("%s: parsing partitions %s\n", master->name, *types); @@ -981,13 +965,17 @@ int parse_mtd_partitions(struct mtd_info *master, const char *const *types, parser ? parser->name : NULL); if (!parser) continue; - ret = mtd_part_do_parse(parser, master, pparts, data); + ret = mtd_part_do_parse(parser, master, &pparts, data); if (ret <= 0) mtd_part_parser_put(parser); } /* Found partitions! */ - if (ret > 0) - return 0; + if (ret > 0) { + err = add_mtd_partitions(master, pparts.parts, + pparts.nr_parts); + mtd_part_parser_cleanup(&pparts); + return err ? err : pparts.nr_parts; + } /* * Stash the first error we see; only report it if no parser * succeeds diff --git a/drivers/mtd/nand/onenand/samsung.c b/drivers/mtd/nand/onenand/samsung.c index 2e9d076e445a..4cce4c0311ca 100644 --- a/drivers/mtd/nand/onenand/samsung.c +++ b/drivers/mtd/nand/onenand/samsung.c @@ -958,8 +958,7 @@ static int s3c_onenand_remove(struct platform_device *pdev) static int s3c_pm_ops_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct mtd_info *mtd = platform_get_drvdata(pdev); + struct mtd_info *mtd = dev_get_drvdata(dev); struct onenand_chip *this = mtd->priv; this->wait(mtd, FL_PM_SUSPENDED); @@ -968,8 +967,7 @@ static int s3c_pm_ops_suspend(struct device *dev) static int s3c_pm_ops_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct mtd_info *mtd = platform_get_drvdata(pdev); + struct mtd_info *mtd = dev_get_drvdata(dev); struct onenand_chip *this = mtd->priv; this->unlock_all(mtd); diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 19a2b283fbbe..6871ff0fd300 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -46,7 +46,7 @@ config MTD_NAND_DENALI config MTD_NAND_DENALI_PCI tristate "Support Denali NAND controller on Intel Moorestown" select MTD_NAND_DENALI - depends on HAS_DMA && PCI + depends on PCI help Enable the driver for NAND flash on Intel Moorestown, using the Denali NAND controller core. @@ -152,7 +152,6 @@ config MTD_NAND_S3C2410_CLKSTOP config MTD_NAND_TANGO tristate "NAND Flash support for Tango chips" depends on ARCH_TANGO || COMPILE_TEST - depends on HAS_DMA help Enables the NAND Flash controller on Tango chips. @@ -285,7 +284,7 @@ config MTD_NAND_MARVELL tristate "NAND controller support on Marvell boards" depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU || \ COMPILE_TEST - depends on HAS_IOMEM && HAS_DMA + depends on HAS_IOMEM help This enables the NAND flash controller driver for Marvell boards, including: @@ -447,7 +446,6 @@ config MTD_NAND_SH_FLCTL tristate "Support for NAND on Renesas SuperH FLCTL" depends on SUPERH || COMPILE_TEST depends on HAS_IOMEM - depends on HAS_DMA help Several Renesas SuperH CPU has FLCTL. This option enables support for NAND Flash using FLCTL. @@ -515,7 +513,6 @@ config MTD_NAND_SUNXI config MTD_NAND_HISI504 tristate "Support for NAND controller on Hisilicon SoC Hip04" depends on ARCH_HISI || COMPILE_TEST - depends on HAS_DMA help Enables support for NAND controller on Hisilicon SoC Hip04. @@ -529,7 +526,6 @@ config MTD_NAND_QCOM config MTD_NAND_MTK tristate "Support for NAND controller on MTK SoCs" depends on ARCH_MEDIATEK || COMPILE_TEST - depends on HAS_DMA help Enables support for NAND controller on MTK SoCs. This controller is found on mt27xx, mt81xx, mt65xx SoCs. diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c index 0f09518d980f..7255a0d94374 100644 --- a/drivers/mtd/nand/raw/davinci_nand.c +++ b/drivers/mtd/nand/raw/davinci_nand.c @@ -27,7 +27,6 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/err.h> -#include <linux/clk.h> #include <linux/io.h> #include <linux/mtd/rawnand.h> #include <linux/mtd/partitions.h> @@ -55,7 +54,6 @@ struct davinci_nand_info { struct nand_chip chip; struct device *dev; - struct clk *clk; bool is_readmode; @@ -703,22 +701,6 @@ static int nand_davinci_probe(struct platform_device *pdev) /* Use board-specific ECC config */ info->chip.ecc.mode = pdata->ecc_mode; - ret = -EINVAL; - - info->clk = devm_clk_get(&pdev->dev, "aemif"); - if (IS_ERR(info->clk)) { - ret = PTR_ERR(info->clk); - dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret); - return ret; - } - - ret = clk_prepare_enable(info->clk); - if (ret < 0) { - dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n", - ret); - goto err_clk_enable; - } - spin_lock_irq(&davinci_nand_lock); /* put CSxNAND into NAND mode */ @@ -732,7 +714,7 @@ static int nand_davinci_probe(struct platform_device *pdev) ret = nand_scan_ident(mtd, pdata->mask_chipsel ? 2 : 1, NULL); if (ret < 0) { dev_dbg(&pdev->dev, "no NAND chip(s) found\n"); - goto err; + return ret; } switch (info->chip.ecc.mode) { @@ -838,9 +820,6 @@ err_cleanup_nand: nand_cleanup(&info->chip); err: - clk_disable_unprepare(info->clk); - -err_clk_enable: spin_lock_irq(&davinci_nand_lock); if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME) ecc4_busy = false; @@ -859,8 +838,6 @@ static int nand_davinci_remove(struct platform_device *pdev) nand_release(nand_to_mtd(&info->chip)); - clk_disable_unprepare(info->clk); - return 0; } diff --git a/drivers/mtd/nand/raw/diskonchip.c b/drivers/mtd/nand/raw/diskonchip.c index 2b7b2b982b77..8d10061abb4b 100644 --- a/drivers/mtd/nand/raw/diskonchip.c +++ b/drivers/mtd/nand/raw/diskonchip.c @@ -1480,12 +1480,12 @@ static int __init doc_probe(unsigned long physadr) WriteDOC(tmp, virtadr, Mplus_DOCControl); WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm); - mdelay(1); + usleep_range(1000, 2000); /* Enable the Millennium Plus ASIC */ tmp = DOC_MODE_NORMAL | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | DOC_MODE_BDECT; WriteDOC(tmp, virtadr, Mplus_DOCControl); WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm); - mdelay(1); + usleep_range(1000, 2000); ChipID = ReadDOC(virtadr, ChipID); diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c index d28df991c73c..51f0b340bc0d 100644 --- a/drivers/mtd/nand/raw/fsl_elbc_nand.c +++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c @@ -813,8 +813,6 @@ static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv) struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand; struct mtd_info *mtd = nand_to_mtd(&priv->chip); - nand_release(mtd); - kfree(mtd->name); if (priv->vbase) @@ -926,15 +924,20 @@ static int fsl_elbc_nand_probe(struct platform_device *pdev) /* First look for RedBoot table or partitions on the command * line, these take precedence over device tree information */ - mtd_device_parse_register(mtd, part_probe_types, NULL, - NULL, 0); + ret = mtd_device_parse_register(mtd, part_probe_types, NULL, NULL, 0); + if (ret) + goto cleanup_nand; pr_info("eLBC NAND device at 0x%llx, bank %d\n", (unsigned long long)res.start, priv->bank); + return 0; +cleanup_nand: + nand_cleanup(&priv->chip); err: fsl_elbc_chip_remove(priv); + return ret; } @@ -942,7 +945,9 @@ static int fsl_elbc_nand_remove(struct platform_device *pdev) { struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand; struct fsl_elbc_mtd *priv = dev_get_drvdata(&pdev->dev); + struct mtd_info *mtd = nand_to_mtd(&priv->chip); + nand_release(mtd); fsl_elbc_chip_remove(priv); mutex_lock(&fsl_elbc_nand_mutex); diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c index 61aae0224078..382b67e97174 100644 --- a/drivers/mtd/nand/raw/fsl_ifc_nand.c +++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c @@ -342,9 +342,16 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, case NAND_CMD_READID: case NAND_CMD_PARAM: { + /* + * For READID, read 8 bytes that are currently used. + * For PARAM, read all 3 copies of 256-bytes pages. + */ + int len = 8; int timing = IFC_FIR_OP_RB; - if (command == NAND_CMD_PARAM) + if (command == NAND_CMD_PARAM) { timing = IFC_FIR_OP_RBCD; + len = 256 * 3; + } ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | @@ -354,12 +361,8 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, &ifc->ifc_nand.nand_fcr0); ifc_out32(column, &ifc->ifc_nand.row3); - /* - * although currently it's 8 bytes for READID, we always read - * the maximum 256 bytes(for PARAM) - */ - ifc_out32(256, &ifc->ifc_nand.nand_fbcr); - ifc_nand_ctrl->read_bytes = 256; + ifc_out32(len, &ifc->ifc_nand.nand_fbcr); + ifc_nand_ctrl->read_bytes = len; set_addr(mtd, 0, 0, 0); fsl_ifc_run_command(mtd); @@ -924,8 +927,6 @@ static int fsl_ifc_chip_remove(struct fsl_ifc_mtd *priv) { struct mtd_info *mtd = nand_to_mtd(&priv->chip); - nand_release(mtd); - kfree(mtd->name); if (priv->vbase) @@ -1059,21 +1060,29 @@ static int fsl_ifc_nand_probe(struct platform_device *dev) /* First look for RedBoot table or partitions on the command * line, these take precedence over device tree information */ - mtd_device_parse_register(mtd, part_probe_types, NULL, NULL, 0); + ret = mtd_device_parse_register(mtd, part_probe_types, NULL, NULL, 0); + if (ret) + goto cleanup_nand; dev_info(priv->dev, "IFC NAND device at 0x%llx, bank %d\n", (unsigned long long)res.start, priv->bank); + return 0; +cleanup_nand: + nand_cleanup(&priv->chip); err: fsl_ifc_chip_remove(priv); + return ret; } static int fsl_ifc_nand_remove(struct platform_device *dev) { struct fsl_ifc_mtd *priv = dev_get_drvdata(&dev->dev); + struct mtd_info *mtd = nand_to_mtd(&priv->chip); + nand_release(mtd); fsl_ifc_chip_remove(priv); mutex_lock(&fsl_ifc_nand_mutex); diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c index 28c48dcc514e..f4a5a317d4ae 100644 --- a/drivers/mtd/nand/raw/fsmc_nand.c +++ b/drivers/mtd/nand/raw/fsmc_nand.c @@ -1022,12 +1022,12 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) host->read_dma_chan = dma_request_channel(mask, filter, NULL); if (!host->read_dma_chan) { dev_err(&pdev->dev, "Unable to get read dma channel\n"); - goto err_req_read_chnl; + goto disable_clk; } host->write_dma_chan = dma_request_channel(mask, filter, NULL); if (!host->write_dma_chan) { dev_err(&pdev->dev, "Unable to get write dma channel\n"); - goto err_req_write_chnl; + goto release_dma_read_chan; } } @@ -1050,7 +1050,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) ret = nand_scan_ident(mtd, 1, NULL); if (ret) { dev_err(&pdev->dev, "No NAND Device found!\n"); - goto err_scan_ident; + goto release_dma_write_chan; } if (AMBA_REV_BITS(host->pid) >= 8) { @@ -1065,7 +1065,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n", mtd->oobsize); ret = -EINVAL; - goto err_probe; + goto release_dma_write_chan; } mtd_set_ooblayout(mtd, &fsmc_ecc4_ooblayout_ops); @@ -1090,7 +1090,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) default: dev_err(&pdev->dev, "Unsupported ECC mode!\n"); - goto err_probe; + goto release_dma_write_chan; } /* @@ -1110,7 +1110,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) "No oob scheme defined for oobsize %d\n", mtd->oobsize); ret = -EINVAL; - goto err_probe; + goto release_dma_write_chan; } } } @@ -1118,26 +1118,29 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) /* Second stage of scan to fill MTD data-structures */ ret = nand_scan_tail(mtd); if (ret) - goto err_probe; + goto release_dma_write_chan; mtd->name = "nand"; ret = mtd_device_register(mtd, NULL, 0); if (ret) - goto err_probe; + goto cleanup_nand; platform_set_drvdata(pdev, host); dev_info(&pdev->dev, "FSMC NAND driver registration successful\n"); + return 0; -err_probe: -err_scan_ident: +cleanup_nand: + nand_cleanup(nand); +release_dma_write_chan: if (host->mode == USE_DMA_ACCESS) dma_release_channel(host->write_dma_chan); -err_req_write_chnl: +release_dma_read_chan: if (host->mode == USE_DMA_ACCESS) dma_release_channel(host->read_dma_chan); -err_req_read_chnl: +disable_clk: clk_disable_unprepare(host->clk); + return ret; } diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c index e94556705dc7..83697b8df871 100644 --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c @@ -258,8 +258,9 @@ int bch_set_geometry(struct gpmi_nand_data *this) unsigned int gf_len; int ret; - if (common_nfc_set_geometry(this)) - return !0; + ret = common_nfc_set_geometry(this); + if (ret) + return ret; block_count = bch_geo->ecc_chunk_count - 1; block_size = bch_geo->ecc_chunk_size; @@ -544,19 +545,13 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip) return reg & mask; } -static inline void set_dma_type(struct gpmi_nand_data *this, - enum dma_ops_type type) -{ - this->last_dma_type = this->dma_type; - this->dma_type = type; -} - int gpmi_send_command(struct gpmi_nand_data *this) { struct dma_chan *channel = get_dma_chan(this); struct dma_async_tx_descriptor *desc; struct scatterlist *sgl; int chip = this->current_chip; + int ret; u32 pio[3]; /* [1] send out the PIO words */ @@ -586,15 +581,19 @@ int gpmi_send_command(struct gpmi_nand_data *this) return -EINVAL; /* [3] submit the DMA */ - set_dma_type(this, DMA_FOR_COMMAND); - return start_dma_without_bch_irq(this, desc); + ret = start_dma_without_bch_irq(this, desc); + + dma_unmap_sg(this->dev, sgl, 1, DMA_TO_DEVICE); + + return ret; } -int gpmi_send_data(struct gpmi_nand_data *this) +int gpmi_send_data(struct gpmi_nand_data *this, const void *buf, int len) { struct dma_async_tx_descriptor *desc; struct dma_chan *channel = get_dma_chan(this); int chip = this->current_chip; + int ret; uint32_t command_mode; uint32_t address; u32 pio[2]; @@ -608,7 +607,7 @@ int gpmi_send_data(struct gpmi_nand_data *this) | BF_GPMI_CTRL0_CS(chip, this) | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this) | BF_GPMI_CTRL0_ADDRESS(address) - | BF_GPMI_CTRL0_XFER_COUNT(this->upper_len); + | BF_GPMI_CTRL0_XFER_COUNT(len); pio[1] = 0; desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); @@ -616,7 +615,7 @@ int gpmi_send_data(struct gpmi_nand_data *this) return -EINVAL; /* [2] send DMA request */ - prepare_data_dma(this, DMA_TO_DEVICE); + prepare_data_dma(this, buf, len, DMA_TO_DEVICE); desc = dmaengine_prep_slave_sg(channel, &this->data_sgl, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); @@ -624,16 +623,21 @@ int gpmi_send_data(struct gpmi_nand_data *this) return -EINVAL; /* [3] submit the DMA */ - set_dma_type(this, DMA_FOR_WRITE_DATA); - return start_dma_without_bch_irq(this, desc); + ret = start_dma_without_bch_irq(this, desc); + + dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_TO_DEVICE); + + return ret; } -int gpmi_read_data(struct gpmi_nand_data *this) +int gpmi_read_data(struct gpmi_nand_data *this, void *buf, int len) { struct dma_async_tx_descriptor *desc; struct dma_chan *channel = get_dma_chan(this); int chip = this->current_chip; + int ret; u32 pio[2]; + bool direct; /* [1] : send PIO */ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__READ) @@ -641,7 +645,7 @@ int gpmi_read_data(struct gpmi_nand_data *this) | BF_GPMI_CTRL0_CS(chip, this) | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this) | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA) - | BF_GPMI_CTRL0_XFER_COUNT(this->upper_len); + | BF_GPMI_CTRL0_XFER_COUNT(len); pio[1] = 0; desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, @@ -650,7 +654,7 @@ int gpmi_read_data(struct gpmi_nand_data *this) return -EINVAL; /* [2] : send DMA request */ - prepare_data_dma(this, DMA_FROM_DEVICE); + direct = prepare_data_dma(this, buf, len, DMA_FROM_DEVICE); desc = dmaengine_prep_slave_sg(channel, &this->data_sgl, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); @@ -658,8 +662,14 @@ int gpmi_read_data(struct gpmi_nand_data *this) return -EINVAL; /* [3] : submit the DMA */ - set_dma_type(this, DMA_FOR_READ_DATA); - return start_dma_without_bch_irq(this, desc); + + ret = start_dma_without_bch_irq(this, desc); + + dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_FROM_DEVICE); + if (!direct) + memcpy(buf, this->data_buffer_dma, len); + + return ret; } int gpmi_send_page(struct gpmi_nand_data *this, @@ -703,7 +713,6 @@ int gpmi_send_page(struct gpmi_nand_data *this, if (!desc) return -EINVAL; - set_dma_type(this, DMA_FOR_WRITE_ECC_PAGE); return start_dma_with_bch_irq(this, desc); } @@ -785,7 +794,6 @@ int gpmi_read_page(struct gpmi_nand_data *this, return -EINVAL; /* [4] submit the DMA */ - set_dma_type(this, DMA_FOR_READ_ECC_PAGE); return start_dma_with_bch_irq(this, desc); } diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c index c2597c8107a0..f6aa358a3452 100644 --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c @@ -198,17 +198,16 @@ static inline bool gpmi_check_ecc(struct gpmi_nand_data *this) * * We may have available oob space in this case. */ -static int set_geometry_by_ecc_info(struct gpmi_nand_data *this) +static int set_geometry_by_ecc_info(struct gpmi_nand_data *this, + unsigned int ecc_strength, + unsigned int ecc_step) { struct bch_geometry *geo = &this->bch_geometry; struct nand_chip *chip = &this->nand; struct mtd_info *mtd = nand_to_mtd(chip); unsigned int block_mark_bit_offset; - if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0)) - return -EINVAL; - - switch (chip->ecc_step_ds) { + switch (ecc_step) { case SZ_512: geo->gf_len = 13; break; @@ -221,8 +220,8 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this) chip->ecc_strength_ds, chip->ecc_step_ds); return -EINVAL; } - geo->ecc_chunk_size = chip->ecc_step_ds; - geo->ecc_strength = round_up(chip->ecc_strength_ds, 2); + geo->ecc_chunk_size = ecc_step; + geo->ecc_strength = round_up(ecc_strength, 2); if (!gpmi_check_ecc(this)) return -EINVAL; @@ -230,7 +229,7 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this) if (geo->ecc_chunk_size < mtd->oobsize) { dev_err(this->dev, "unsupported nand chip. ecc size: %d, oob size : %d\n", - chip->ecc_step_ds, mtd->oobsize); + ecc_step, mtd->oobsize); return -EINVAL; } @@ -423,9 +422,20 @@ static int legacy_set_geometry(struct gpmi_nand_data *this) int common_nfc_set_geometry(struct gpmi_nand_data *this) { + struct nand_chip *chip = &this->nand; + + if (chip->ecc.strength > 0 && chip->ecc.size > 0) + return set_geometry_by_ecc_info(this, chip->ecc.strength, + chip->ecc.size); + if ((of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc")) - || legacy_set_geometry(this)) - return set_geometry_by_ecc_info(this); + || legacy_set_geometry(this)) { + if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0)) + return -EINVAL; + + return set_geometry_by_ecc_info(this, chip->ecc_strength_ds, + chip->ecc_step_ds); + } return 0; } @@ -437,33 +447,32 @@ struct dma_chan *get_dma_chan(struct gpmi_nand_data *this) } /* Can we use the upper's buffer directly for DMA? */ -void prepare_data_dma(struct gpmi_nand_data *this, enum dma_data_direction dr) +bool prepare_data_dma(struct gpmi_nand_data *this, const void *buf, int len, + enum dma_data_direction dr) { struct scatterlist *sgl = &this->data_sgl; int ret; /* first try to map the upper buffer directly */ - if (virt_addr_valid(this->upper_buf) && - !object_is_on_stack(this->upper_buf)) { - sg_init_one(sgl, this->upper_buf, this->upper_len); + if (virt_addr_valid(buf) && !object_is_on_stack(buf)) { + sg_init_one(sgl, buf, len); ret = dma_map_sg(this->dev, sgl, 1, dr); if (ret == 0) goto map_fail; - this->direct_dma_map_ok = true; - return; + return true; } map_fail: /* We have to use our own DMA buffer. */ - sg_init_one(sgl, this->data_buffer_dma, this->upper_len); + sg_init_one(sgl, this->data_buffer_dma, len); if (dr == DMA_TO_DEVICE) - memcpy(this->data_buffer_dma, this->upper_buf, this->upper_len); + memcpy(this->data_buffer_dma, buf, len); dma_map_sg(this->dev, sgl, 1, dr); - this->direct_dma_map_ok = false; + return false; } /* This will be called after the DMA operation is finished. */ @@ -472,31 +481,6 @@ static void dma_irq_callback(void *param) struct gpmi_nand_data *this = param; struct completion *dma_c = &this->dma_done; - switch (this->dma_type) { - case DMA_FOR_COMMAND: - dma_unmap_sg(this->dev, &this->cmd_sgl, 1, DMA_TO_DEVICE); - break; - - case DMA_FOR_READ_DATA: - dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_FROM_DEVICE); - if (this->direct_dma_map_ok == false) - memcpy(this->upper_buf, this->data_buffer_dma, - this->upper_len); - break; - - case DMA_FOR_WRITE_DATA: - dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_TO_DEVICE); - break; - - case DMA_FOR_READ_ECC_PAGE: - case DMA_FOR_WRITE_ECC_PAGE: - /* We have to wait the BCH interrupt to finish. */ - break; - - default: - dev_err(this->dev, "in wrong DMA operation.\n"); - } - complete(dma_c); } @@ -516,8 +500,7 @@ int start_dma_without_bch_irq(struct gpmi_nand_data *this, /* Wait for the interrupt from the DMA block. */ timeout = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000)); if (!timeout) { - dev_err(this->dev, "DMA timeout, last DMA :%d\n", - this->last_dma_type); + dev_err(this->dev, "DMA timeout, last DMA\n"); gpmi_dump_info(this); return -ETIMEDOUT; } @@ -546,8 +529,7 @@ int start_dma_with_bch_irq(struct gpmi_nand_data *this, /* Wait for the interrupt from the BCH block. */ timeout = wait_for_completion_timeout(bch_c, msecs_to_jiffies(1000)); if (!timeout) { - dev_err(this->dev, "BCH timeout, last DMA :%d\n", - this->last_dma_type); + dev_err(this->dev, "BCH timeout\n"); gpmi_dump_info(this); return -ETIMEDOUT; } @@ -695,56 +677,6 @@ static void release_resources(struct gpmi_nand_data *this) release_dma_channels(this); } -static int read_page_prepare(struct gpmi_nand_data *this, - void *destination, unsigned length, - void *alt_virt, dma_addr_t alt_phys, unsigned alt_size, - void **use_virt, dma_addr_t *use_phys) -{ - struct device *dev = this->dev; - - if (virt_addr_valid(destination)) { - dma_addr_t dest_phys; - - dest_phys = dma_map_single(dev, destination, - length, DMA_FROM_DEVICE); - if (dma_mapping_error(dev, dest_phys)) { - if (alt_size < length) { - dev_err(dev, "Alternate buffer is too small\n"); - return -ENOMEM; - } - goto map_failed; - } - *use_virt = destination; - *use_phys = dest_phys; - this->direct_dma_map_ok = true; - return 0; - } - -map_failed: - *use_virt = alt_virt; - *use_phys = alt_phys; - this->direct_dma_map_ok = false; - return 0; -} - -static inline void read_page_end(struct gpmi_nand_data *this, - void *destination, unsigned length, - void *alt_virt, dma_addr_t alt_phys, unsigned alt_size, - void *used_virt, dma_addr_t used_phys) -{ - if (this->direct_dma_map_ok) - dma_unmap_single(this->dev, used_phys, length, DMA_FROM_DEVICE); -} - -static inline void read_page_swap_end(struct gpmi_nand_data *this, - void *destination, unsigned length, - void *alt_virt, dma_addr_t alt_phys, unsigned alt_size, - void *used_virt, dma_addr_t used_phys) -{ - if (!this->direct_dma_map_ok) - memcpy(destination, alt_virt, length); -} - static int send_page_prepare(struct gpmi_nand_data *this, const void *source, unsigned length, void *alt_virt, dma_addr_t alt_phys, unsigned alt_size, @@ -946,10 +878,8 @@ static void gpmi_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) struct gpmi_nand_data *this = nand_get_controller_data(chip); dev_dbg(this->dev, "len is %d\n", len); - this->upper_buf = buf; - this->upper_len = len; - gpmi_read_data(this); + gpmi_read_data(this, buf, len); } static void gpmi_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) @@ -958,10 +888,8 @@ static void gpmi_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) struct gpmi_nand_data *this = nand_get_controller_data(chip); dev_dbg(this->dev, "len is %d\n", len); - this->upper_buf = (uint8_t *)buf; - this->upper_len = len; - gpmi_send_data(this); + gpmi_send_data(this, buf, len); } static uint8_t gpmi_read_byte(struct mtd_info *mtd) @@ -1031,44 +959,46 @@ static int gpmi_ecc_read_page_data(struct nand_chip *chip, struct mtd_info *mtd = nand_to_mtd(chip); void *payload_virt; dma_addr_t payload_phys; - void *auxiliary_virt; - dma_addr_t auxiliary_phys; unsigned int i; unsigned char *status; unsigned int max_bitflips = 0; int ret; + bool direct = false; dev_dbg(this->dev, "page number is : %d\n", page); - ret = read_page_prepare(this, buf, nfc_geo->payload_size, - this->payload_virt, this->payload_phys, - nfc_geo->payload_size, - &payload_virt, &payload_phys); - if (ret) { - dev_err(this->dev, "Inadequate DMA buffer\n"); - ret = -ENOMEM; - return ret; + + payload_virt = this->payload_virt; + payload_phys = this->payload_phys; + + if (virt_addr_valid(buf)) { + dma_addr_t dest_phys; + + dest_phys = dma_map_single(this->dev, buf, nfc_geo->payload_size, + DMA_FROM_DEVICE); + if (!dma_mapping_error(this->dev, dest_phys)) { + payload_virt = buf; + payload_phys = dest_phys; + direct = true; + } } - auxiliary_virt = this->auxiliary_virt; - auxiliary_phys = this->auxiliary_phys; /* go! */ - ret = gpmi_read_page(this, payload_phys, auxiliary_phys); - read_page_end(this, buf, nfc_geo->payload_size, - this->payload_virt, this->payload_phys, - nfc_geo->payload_size, - payload_virt, payload_phys); + ret = gpmi_read_page(this, payload_phys, this->auxiliary_phys); + + if (direct) + dma_unmap_single(this->dev, payload_phys, nfc_geo->payload_size, + DMA_FROM_DEVICE); + if (ret) { dev_err(this->dev, "Error in ECC-based read: %d\n", ret); return ret; } /* Loop over status bytes, accumulating ECC status. */ - status = auxiliary_virt + nfc_geo->auxiliary_status_offset; + status = this->auxiliary_virt + nfc_geo->auxiliary_status_offset; - read_page_swap_end(this, buf, nfc_geo->payload_size, - this->payload_virt, this->payload_phys, - nfc_geo->payload_size, - payload_virt, payload_phys); + if (!direct) + memcpy(buf, this->payload_virt, nfc_geo->payload_size); for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) { if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED)) @@ -1123,7 +1053,7 @@ static int gpmi_ecc_read_page_data(struct nand_chip *chip, buf + i * nfc_geo->ecc_chunk_size, nfc_geo->ecc_chunk_size, eccbuf, eccbytes, - auxiliary_virt, + this->auxiliary_virt, nfc_geo->metadata_size, nfc_geo->ecc_strength); } else { @@ -1151,7 +1081,7 @@ static int gpmi_ecc_read_page_data(struct nand_chip *chip, } /* handle the block mark swapping */ - block_mark_swapping(this, buf, auxiliary_virt); + block_mark_swapping(this, buf, this->auxiliary_virt); if (oob_required) { /* @@ -1165,7 +1095,7 @@ static int gpmi_ecc_read_page_data(struct nand_chip *chip, * the block mark. */ memset(chip->oob_poi, ~0, mtd->oobsize); - chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0]; + chip->oob_poi[0] = ((uint8_t *)this->auxiliary_virt)[0]; } return max_bitflips; diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h index 62fde59b995f..6aa10d6962d6 100644 --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h @@ -77,15 +77,6 @@ struct boot_rom_geometry { unsigned int search_area_stride_exponent; }; -/* DMA operations types */ -enum dma_ops_type { - DMA_FOR_COMMAND = 1, - DMA_FOR_READ_DATA, - DMA_FOR_WRITE_DATA, - DMA_FOR_READ_ECC_PAGE, - DMA_FOR_WRITE_ECC_PAGE -}; - enum gpmi_type { IS_MX23, IS_MX28, @@ -150,13 +141,6 @@ struct gpmi_nand_data { int current_chip; unsigned int command_length; - /* passed from upper layer */ - uint8_t *upper_buf; - int upper_len; - - /* for DMA operations */ - bool direct_dma_map_ok; - struct scatterlist cmd_sgl; char *cmd_buffer; @@ -178,8 +162,6 @@ struct gpmi_nand_data { /* DMA channels */ #define DMA_CHANS 8 struct dma_chan *dma_chans[DMA_CHANS]; - enum dma_ops_type last_dma_type; - enum dma_ops_type dma_type; struct completion dma_done; /* private */ @@ -189,7 +171,7 @@ struct gpmi_nand_data { /* Common Services */ int common_nfc_set_geometry(struct gpmi_nand_data *); struct dma_chan *get_dma_chan(struct gpmi_nand_data *); -void prepare_data_dma(struct gpmi_nand_data *, +bool prepare_data_dma(struct gpmi_nand_data *, const void *buf, int len, enum dma_data_direction dr); int start_dma_without_bch_irq(struct gpmi_nand_data *, struct dma_async_tx_descriptor *); @@ -208,8 +190,9 @@ int gpmi_disable_clk(struct gpmi_nand_data *this); int gpmi_setup_data_interface(struct mtd_info *mtd, int chipnr, const struct nand_data_interface *conf); void gpmi_nfc_apply_timings(struct gpmi_nand_data *this); -int gpmi_read_data(struct gpmi_nand_data *); -int gpmi_send_data(struct gpmi_nand_data *); +int gpmi_read_data(struct gpmi_nand_data *, void *buf, int len); +int gpmi_send_data(struct gpmi_nand_data *, const void *buf, int len); + int gpmi_send_page(struct gpmi_nand_data *, dma_addr_t payload, dma_addr_t auxiliary); int gpmi_read_page(struct gpmi_nand_data *, diff --git a/drivers/mtd/nand/raw/hisi504_nand.c b/drivers/mtd/nand/raw/hisi504_nand.c index 27558a67fa41..a1e009c8e556 100644 --- a/drivers/mtd/nand/raw/hisi504_nand.c +++ b/drivers/mtd/nand/raw/hisi504_nand.c @@ -731,23 +731,19 @@ static int hisi_nfc_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(dev, "no IRQ resource defined\n"); - ret = -ENXIO; - goto err_res; + return -ENXIO; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); host->iobase = devm_ioremap_resource(dev, res); - if (IS_ERR(host->iobase)) { - ret = PTR_ERR(host->iobase); - goto err_res; - } + if (IS_ERR(host->iobase)) + return PTR_ERR(host->iobase); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); host->mmio = devm_ioremap_resource(dev, res); if (IS_ERR(host->mmio)) { - ret = PTR_ERR(host->mmio); dev_err(dev, "devm_ioremap_resource[1] fail\n"); - goto err_res; + return PTR_ERR(host->mmio); } mtd->name = "hisi_nand"; @@ -770,19 +766,17 @@ static int hisi_nfc_probe(struct platform_device *pdev) ret = devm_request_irq(dev, irq, hinfc_irq_handle, 0x0, "nandc", host); if (ret) { dev_err(dev, "failed to request IRQ\n"); - goto err_res; + return ret; } ret = nand_scan_ident(mtd, max_chips, NULL); if (ret) - goto err_res; + return ret; host->buffer = dmam_alloc_coherent(dev, mtd->writesize + mtd->oobsize, &host->dma_buffer, GFP_KERNEL); - if (!host->buffer) { - ret = -ENOMEM; - goto err_res; - } + if (!host->buffer) + return -ENOMEM; host->dma_oob = host->dma_buffer + mtd->writesize; memset(host->buffer, 0xff, mtd->writesize + mtd->oobsize); @@ -798,8 +792,7 @@ static int hisi_nfc_probe(struct platform_device *pdev) */ default: dev_err(dev, "NON-2KB page size nand flash\n"); - ret = -EINVAL; - goto err_res; + return -EINVAL; } hinfc_write(host, flag, HINFC504_CON); @@ -809,21 +802,17 @@ static int hisi_nfc_probe(struct platform_device *pdev) ret = nand_scan_tail(mtd); if (ret) { dev_err(dev, "nand_scan_tail failed: %d\n", ret); - goto err_res; + return ret; } ret = mtd_device_register(mtd, NULL, 0); if (ret) { dev_err(dev, "Err MTD partition=%d\n", ret); - goto err_mtd; + nand_cleanup(chip); + return ret; } return 0; - -err_mtd: - nand_release(mtd); -err_res: - return ret; } static int hisi_nfc_remove(struct platform_device *pdev) diff --git a/drivers/mtd/nand/raw/lpc32xx_mlc.c b/drivers/mtd/nand/raw/lpc32xx_mlc.c index e357948a7505..052d123a8304 100644 --- a/drivers/mtd/nand/raw/lpc32xx_mlc.c +++ b/drivers/mtd/nand/raw/lpc32xx_mlc.c @@ -673,7 +673,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) host->io_base = devm_ioremap_resource(&pdev->dev, rc); if (IS_ERR(host->io_base)) return PTR_ERR(host->io_base); - + host->io_base_phy = rc->start; nand_chip = &host->nand_chip; @@ -706,11 +706,11 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) if (IS_ERR(host->clk)) { dev_err(&pdev->dev, "Clock initialization failure\n"); res = -ENOENT; - goto err_exit1; + goto free_gpio; } res = clk_prepare_enable(host->clk); if (res) - goto err_put_clk; + goto put_clk; nand_chip->cmd_ctrl = lpc32xx_nand_cmd_ctrl; nand_chip->dev_ready = lpc32xx_nand_device_ready; @@ -744,7 +744,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) res = lpc32xx_dma_setup(host); if (res) { res = -EIO; - goto err_exit2; + goto unprepare_clk; } } @@ -754,18 +754,18 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) */ res = nand_scan_ident(mtd, 1, NULL); if (res) - goto err_exit3; + goto release_dma_chan; host->dma_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL); if (!host->dma_buf) { res = -ENOMEM; - goto err_exit3; + goto release_dma_chan; } host->dummy_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL); if (!host->dummy_buf) { res = -ENOMEM; - goto err_exit3; + goto release_dma_chan; } nand_chip->ecc.mode = NAND_ECC_HW; @@ -783,14 +783,14 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) if (host->irq < 0) { dev_err(&pdev->dev, "failed to get platform irq\n"); res = -EINVAL; - goto err_exit3; + goto release_dma_chan; } if (request_irq(host->irq, (irq_handler_t)&lpc3xxx_nand_irq, IRQF_TRIGGER_HIGH, DRV_NAME, host)) { dev_err(&pdev->dev, "Error requesting NAND IRQ\n"); res = -ENXIO; - goto err_exit3; + goto release_dma_chan; } /* @@ -799,27 +799,29 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) */ res = nand_scan_tail(mtd); if (res) - goto err_exit4; + goto free_irq; mtd->name = DRV_NAME; res = mtd_device_register(mtd, host->ncfg->parts, host->ncfg->num_parts); - if (!res) - return res; + if (res) + goto cleanup_nand; - nand_release(mtd); + return 0; -err_exit4: +cleanup_nand: + nand_cleanup(nand_chip); +free_irq: free_irq(host->irq, host); -err_exit3: +release_dma_chan: if (use_dma) dma_release_channel(host->dma_chan); -err_exit2: +unprepare_clk: clk_disable_unprepare(host->clk); -err_put_clk: +put_clk: clk_put(host->clk); -err_exit1: +free_gpio: lpc32xx_wp_enable(host); gpio_free(host->ncfg->wp_gpio); diff --git a/drivers/mtd/nand/raw/lpc32xx_slc.c b/drivers/mtd/nand/raw/lpc32xx_slc.c index 5f7cc6da0a7f..42820aa1abab 100644 --- a/drivers/mtd/nand/raw/lpc32xx_slc.c +++ b/drivers/mtd/nand/raw/lpc32xx_slc.c @@ -831,11 +831,11 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) if (IS_ERR(host->clk)) { dev_err(&pdev->dev, "Clock failure\n"); res = -ENOENT; - goto err_exit1; + goto enable_wp; } res = clk_prepare_enable(host->clk); if (res) - goto err_exit1; + goto enable_wp; /* Set NAND IO addresses and command/ready functions */ chip->IO_ADDR_R = SLC_DATA(host->io_base); @@ -874,19 +874,19 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) GFP_KERNEL); if (host->data_buf == NULL) { res = -ENOMEM; - goto err_exit2; + goto unprepare_clk; } res = lpc32xx_nand_dma_setup(host); if (res) { res = -EIO; - goto err_exit2; + goto unprepare_clk; } /* Find NAND device */ res = nand_scan_ident(mtd, 1, NULL); if (res) - goto err_exit3; + goto release_dma; /* OOB and ECC CPU and DMA work areas */ host->ecc_buf = (uint32_t *)(host->data_buf + LPC32XX_DMA_DATA_SIZE); @@ -920,21 +920,23 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) */ res = nand_scan_tail(mtd); if (res) - goto err_exit3; + goto release_dma; mtd->name = "nxp_lpc3220_slc"; res = mtd_device_register(mtd, host->ncfg->parts, host->ncfg->num_parts); - if (!res) - return res; + if (res) + goto cleanup_nand; - nand_release(mtd); + return 0; -err_exit3: +cleanup_nand: + nand_cleanup(chip); +release_dma: dma_release_channel(host->dma_chan); -err_exit2: +unprepare_clk: clk_disable_unprepare(host->clk); -err_exit1: +enable_wp: lpc32xx_wp_enable(host); return res; diff --git a/drivers/mtd/nand/raw/mtk_ecc.c b/drivers/mtd/nand/raw/mtk_ecc.c index 40d86a861a70..6432bd70c3b3 100644 --- a/drivers/mtd/nand/raw/mtk_ecc.c +++ b/drivers/mtd/nand/raw/mtk_ecc.c @@ -500,7 +500,6 @@ static int mtk_ecc_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct mtk_ecc *ecc; struct resource *res; - const struct of_device_id *of_ecc_id = NULL; u32 max_eccdata_size; int irq, ret; @@ -508,11 +507,7 @@ static int mtk_ecc_probe(struct platform_device *pdev) if (!ecc) return -ENOMEM; - of_ecc_id = of_match_device(mtk_ecc_dt_match, &pdev->dev); - if (!of_ecc_id) - return -ENODEV; - - ecc->caps = of_ecc_id->data; + ecc->caps = of_device_get_match_data(dev); max_eccdata_size = ecc->caps->num_ecc_strength - 1; max_eccdata_size = ecc->caps->ecc_strength[max_eccdata_size]; diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c index 6977da3a26aa..75c845adb050 100644 --- a/drivers/mtd/nand/raw/mtk_nand.c +++ b/drivers/mtd/nand/raw/mtk_nand.c @@ -1434,7 +1434,6 @@ static int mtk_nfc_probe(struct platform_device *pdev) struct device_node *np = dev->of_node; struct mtk_nfc *nfc; struct resource *res; - const struct of_device_id *of_nfc_id = NULL; int ret, irq; nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL); @@ -1452,6 +1451,7 @@ static int mtk_nfc_probe(struct platform_device *pdev) else if (!nfc->ecc) return -ENODEV; + nfc->caps = of_device_get_match_data(dev); nfc->dev = dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1498,14 +1498,6 @@ static int mtk_nfc_probe(struct platform_device *pdev) goto clk_disable; } - of_nfc_id = of_match_device(mtk_nfc_id_table, &pdev->dev); - if (!of_nfc_id) { - ret = -ENODEV; - goto clk_disable; - } - - nfc->caps = of_nfc_id->data; - platform_set_drvdata(pdev, nfc); ret = mtk_nfc_nand_chips_init(dev, nfc); diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index f28c3a555861..10c4f9919850 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -2174,7 +2174,6 @@ static int nand_set_features_op(struct nand_chip *chip, u8 feature, struct mtd_info *mtd = nand_to_mtd(chip); const u8 *params = data; int i, ret; - u8 status; if (chip->exec_op) { const struct nand_sdr_timings *sdr = @@ -2188,26 +2187,18 @@ static int nand_set_features_op(struct nand_chip *chip, u8 feature, }; struct nand_operation op = NAND_OPERATION(instrs); - ret = nand_exec_op(chip, &op); - if (ret) - return ret; - - ret = nand_status_op(chip, &status); - if (ret) - return ret; - } else { - chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, feature, -1); - for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i) - chip->write_byte(mtd, params[i]); + return nand_exec_op(chip, &op); + } - ret = chip->waitfunc(mtd, chip); - if (ret < 0) - return ret; + chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, feature, -1); + for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i) + chip->write_byte(mtd, params[i]); - status = ret; - } + ret = chip->waitfunc(mtd, chip); + if (ret < 0) + return ret; - if (status & NAND_STATUS_FAIL) + if (ret & NAND_STATUS_FAIL) return -EIO; return 0; @@ -5092,6 +5083,37 @@ ext_out: } /* + * Recover data with bit-wise majority + */ +static void nand_bit_wise_majority(const void **srcbufs, + unsigned int nsrcbufs, + void *dstbuf, + unsigned int bufsize) +{ + int i, j, k; + + for (i = 0; i < bufsize; i++) { + u8 val = 0; + + for (j = 0; j < 8; j++) { + unsigned int cnt = 0; + + for (k = 0; k < nsrcbufs; k++) { + const u8 *srcbuf = srcbufs[k]; + + if (srcbuf[i] & BIT(j)) + cnt++; + } + + if (cnt > nsrcbufs / 2) + val |= BIT(j); + } + + ((u8 *)dstbuf)[i] = val; + } +} + +/* * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise. */ static int nand_flash_detect_onfi(struct nand_chip *chip) @@ -5107,7 +5129,7 @@ static int nand_flash_detect_onfi(struct nand_chip *chip) return 0; /* ONFI chip: allocate a buffer to hold its parameter page */ - p = kzalloc(sizeof(*p), GFP_KERNEL); + p = kzalloc((sizeof(*p) * 3), GFP_KERNEL); if (!p) return -ENOMEM; @@ -5118,21 +5140,32 @@ static int nand_flash_detect_onfi(struct nand_chip *chip) } for (i = 0; i < 3; i++) { - ret = nand_read_data_op(chip, p, sizeof(*p), true); + ret = nand_read_data_op(chip, &p[i], sizeof(*p), true); if (ret) { ret = 0; goto free_onfi_param_page; } - if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) == + if (onfi_crc16(ONFI_CRC_BASE, (u8 *)&p[i], 254) == le16_to_cpu(p->crc)) { + if (i) + memcpy(p, &p[i], sizeof(*p)); break; } } if (i == 3) { - pr_err("Could not find valid ONFI parameter page; aborting\n"); - goto free_onfi_param_page; + const void *srcbufs[3] = {p, p + 1, p + 2}; + + pr_warn("Could not find a valid ONFI parameter page, trying bit-wise majority to recover it\n"); + nand_bit_wise_majority(srcbufs, ARRAY_SIZE(srcbufs), p, + sizeof(*p)); + + if (onfi_crc16(ONFI_CRC_BASE, (u8 *)p, 254) != + le16_to_cpu(p->crc)) { + pr_err("ONFI parameter recovery failed, aborting\n"); + goto free_onfi_param_page; + } } /* Check version */ @@ -6635,24 +6668,26 @@ EXPORT_SYMBOL(nand_scan_tail); #endif /** - * nand_scan - [NAND Interface] Scan for the NAND device + * nand_scan_with_ids - [NAND Interface] Scan for the NAND device * @mtd: MTD device structure * @maxchips: number of chips to scan for + * @ids: optional flash IDs table * * This fills out all the uninitialized function pointers with the defaults. * The flash ID is read and the mtd/chip structures are filled with the * appropriate values. */ -int nand_scan(struct mtd_info *mtd, int maxchips) +int nand_scan_with_ids(struct mtd_info *mtd, int maxchips, + struct nand_flash_dev *ids) { int ret; - ret = nand_scan_ident(mtd, maxchips, NULL); + ret = nand_scan_ident(mtd, maxchips, ids); if (!ret) ret = nand_scan_tail(mtd); return ret; } -EXPORT_SYMBOL(nand_scan); +EXPORT_SYMBOL(nand_scan_with_ids); /** * nand_cleanup - [NAND Interface] Free resources held by the NAND device diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c index aad42812a353..d831a141a196 100644 --- a/drivers/mtd/nand/raw/sunxi_nand.c +++ b/drivers/mtd/nand/raw/sunxi_nand.c @@ -166,48 +166,15 @@ #define NFC_MAX_CS 7 /* - * Ready/Busy detection type: describes the Ready/Busy detection modes - * - * @RB_NONE: no external detection available, rely on STATUS command - * and software timeouts - * @RB_NATIVE: use sunxi NAND controller Ready/Busy support. The Ready/Busy - * pin of the NAND flash chip must be connected to one of the - * native NAND R/B pins (those which can be muxed to the NAND - * Controller) - * @RB_GPIO: use a simple GPIO to handle Ready/Busy status. The Ready/Busy - * pin of the NAND flash chip must be connected to a GPIO capable - * pin. - */ -enum sunxi_nand_rb_type { - RB_NONE, - RB_NATIVE, - RB_GPIO, -}; - -/* - * Ready/Busy structure: stores information related to Ready/Busy detection - * - * @type: the Ready/Busy detection mode - * @info: information related to the R/B detection mode. Either a gpio - * id or a native R/B id (those supported by the NAND controller). - */ -struct sunxi_nand_rb { - enum sunxi_nand_rb_type type; - union { - int gpio; - int nativeid; - } info; -}; - -/* * Chip Select structure: stores information related to NAND Chip Select * * @cs: the NAND CS id used to communicate with a NAND Chip - * @rb: the Ready/Busy description + * @rb: the Ready/Busy pin ID. -1 means no R/B pin connected to the + * NFC */ struct sunxi_nand_chip_sel { u8 cs; - struct sunxi_nand_rb rb; + s8 rb; }; /* @@ -440,30 +407,19 @@ static int sunxi_nfc_dev_ready(struct mtd_info *mtd) struct nand_chip *nand = mtd_to_nand(mtd); struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand); struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller); - struct sunxi_nand_rb *rb; - int ret; + u32 mask; if (sunxi_nand->selected < 0) return 0; - rb = &sunxi_nand->sels[sunxi_nand->selected].rb; - - switch (rb->type) { - case RB_NATIVE: - ret = !!(readl(nfc->regs + NFC_REG_ST) & - NFC_RB_STATE(rb->info.nativeid)); - break; - case RB_GPIO: - ret = gpio_get_value(rb->info.gpio); - break; - case RB_NONE: - default: - ret = 0; + if (sunxi_nand->sels[sunxi_nand->selected].rb < 0) { dev_err(nfc->dev, "cannot check R/B NAND status!\n"); - break; + return 0; } - return ret; + mask = NFC_RB_STATE(sunxi_nand->sels[sunxi_nand->selected].rb); + + return !!(readl(nfc->regs + NFC_REG_ST) & mask); } static void sunxi_nfc_select_chip(struct mtd_info *mtd, int chip) @@ -488,12 +444,11 @@ static void sunxi_nfc_select_chip(struct mtd_info *mtd, int chip) ctl |= NFC_CE_SEL(sel->cs) | NFC_EN | NFC_PAGE_SHIFT(nand->page_shift); - if (sel->rb.type == RB_NONE) { + if (sel->rb < 0) { nand->dev_ready = NULL; } else { nand->dev_ready = sunxi_nfc_dev_ready; - if (sel->rb.type == RB_NATIVE) - ctl |= NFC_RB_SEL(sel->rb.info.nativeid); + ctl |= NFC_RB_SEL(sel->rb); } writel(mtd->writesize, nfc->regs + NFC_REG_SPARE_AREA); @@ -1946,26 +1901,10 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc, chip->sels[i].cs = tmp; if (!of_property_read_u32_index(np, "allwinner,rb", i, &tmp) && - tmp < 2) { - chip->sels[i].rb.type = RB_NATIVE; - chip->sels[i].rb.info.nativeid = tmp; - } else { - ret = of_get_named_gpio(np, "rb-gpios", i); - if (ret >= 0) { - tmp = ret; - chip->sels[i].rb.type = RB_GPIO; - chip->sels[i].rb.info.gpio = tmp; - ret = devm_gpio_request(dev, tmp, "nand-rb"); - if (ret) - return ret; - - ret = gpio_direction_input(tmp); - if (ret) - return ret; - } else { - chip->sels[i].rb.type = RB_NONE; - } - } + tmp < 2) + chip->sels[i].rb = tmp; + else + chip->sels[i].rb = -1; } nand = &chip->nand; diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c index a6fbfa4e5799..6281da3dadac 100644 --- a/drivers/mtd/nftlmount.c +++ b/drivers/mtd/nftlmount.c @@ -272,28 +272,37 @@ static int memcmpb(void *a, int c, int n) static int check_free_sectors(struct NFTLrecord *nftl, unsigned int address, int len, int check_oob) { - u8 buf[SECTORSIZE + nftl->mbd.mtd->oobsize]; struct mtd_info *mtd = nftl->mbd.mtd; size_t retlen; - int i; + int i, ret; + u8 *buf; + + buf = kmalloc(SECTORSIZE + mtd->oobsize, GFP_KERNEL); + if (!buf) + return -1; + ret = -1; for (i = 0; i < len; i += SECTORSIZE) { if (mtd_read(mtd, address, SECTORSIZE, &retlen, buf)) - return -1; + goto out; if (memcmpb(buf, 0xff, SECTORSIZE) != 0) - return -1; + goto out; if (check_oob) { if(nftl_read_oob(mtd, address, mtd->oobsize, &retlen, &buf[SECTORSIZE]) < 0) - return -1; + goto out; if (memcmpb(buf + SECTORSIZE, 0xff, mtd->oobsize) != 0) - return -1; + goto out; } address += SECTORSIZE; } - return 0; + ret = 0; + +out: + kfree(buf); + return ret; } /* NFTL_format: format a Erase Unit by erasing ALL Erase Zones in the Erase Unit and diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index 89da88e59121..6cc9c929ff57 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -71,7 +71,7 @@ config SPI_FSL_QUADSPI config SPI_HISI_SFC tristate "Hisilicon SPI-NOR Flash Controller(SFC)" depends on ARCH_HISI || COMPILE_TEST - depends on HAS_IOMEM && HAS_DMA + depends on HAS_IOMEM help This enables support for hisilicon SPI-NOR flash controller. @@ -90,7 +90,7 @@ config SPI_INTEL_SPI tristate config SPI_INTEL_SPI_PCI - tristate "Intel PCH/PCU SPI flash PCI driver" + tristate "Intel PCH/PCU SPI flash PCI driver (DANGEROUS)" depends on X86 && PCI select SPI_INTEL_SPI help @@ -106,7 +106,7 @@ config SPI_INTEL_SPI_PCI will be called intel-spi-pci. config SPI_INTEL_SPI_PLATFORM - tristate "Intel PCH/PCU SPI flash platform driver" + tristate "Intel PCH/PCU SPI flash platform driver (DANGEROUS)" depends on X86 select SPI_INTEL_SPI help diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index 5872f31eaa60..c3f7aaa5d18f 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -18,6 +18,8 @@ #include <linux/clk.h> #include <linux/completion.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> #include <linux/err.h> #include <linux/errno.h> #include <linux/interrupt.h> @@ -73,6 +75,10 @@ struct cqspi_st { struct completion transfer_complete; struct mutex bus_mutex; + struct dma_chan *rx_chan; + struct completion rx_dma_complete; + dma_addr_t mmap_phys_base; + int current_cs; int current_page_size; int current_erase_size; @@ -930,11 +936,75 @@ static ssize_t cqspi_write(struct spi_nor *nor, loff_t to, return len; } +static void cqspi_rx_dma_callback(void *param) +{ + struct cqspi_st *cqspi = param; + + complete(&cqspi->rx_dma_complete); +} + +static int cqspi_direct_read_execute(struct spi_nor *nor, u_char *buf, + loff_t from, size_t len) +{ + struct cqspi_flash_pdata *f_pdata = nor->priv; + struct cqspi_st *cqspi = f_pdata->cqspi; + enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT; + dma_addr_t dma_src = (dma_addr_t)cqspi->mmap_phys_base + from; + int ret = 0; + struct dma_async_tx_descriptor *tx; + dma_cookie_t cookie; + dma_addr_t dma_dst; + + if (!cqspi->rx_chan || !virt_addr_valid(buf)) { + memcpy_fromio(buf, cqspi->ahb_base + from, len); + return 0; + } + + dma_dst = dma_map_single(nor->dev, buf, len, DMA_DEV_TO_MEM); + if (dma_mapping_error(nor->dev, dma_dst)) { + dev_err(nor->dev, "dma mapping failed\n"); + return -ENOMEM; + } + tx = dmaengine_prep_dma_memcpy(cqspi->rx_chan, dma_dst, dma_src, + len, flags); + if (!tx) { + dev_err(nor->dev, "device_prep_dma_memcpy error\n"); + ret = -EIO; + goto err_unmap; + } + + tx->callback = cqspi_rx_dma_callback; + tx->callback_param = cqspi; + cookie = tx->tx_submit(tx); + reinit_completion(&cqspi->rx_dma_complete); + + ret = dma_submit_error(cookie); + if (ret) { + dev_err(nor->dev, "dma_submit_error %d\n", cookie); + ret = -EIO; + goto err_unmap; + } + + dma_async_issue_pending(cqspi->rx_chan); + ret = wait_for_completion_timeout(&cqspi->rx_dma_complete, + msecs_to_jiffies(len)); + if (ret <= 0) { + dmaengine_terminate_sync(cqspi->rx_chan); + dev_err(nor->dev, "DMA wait_for_completion_timeout\n"); + ret = -ETIMEDOUT; + goto err_unmap; + } + +err_unmap: + dma_unmap_single(nor->dev, dma_dst, len, DMA_DEV_TO_MEM); + + return 0; +} + static ssize_t cqspi_read(struct spi_nor *nor, loff_t from, size_t len, u_char *buf) { struct cqspi_flash_pdata *f_pdata = nor->priv; - struct cqspi_st *cqspi = f_pdata->cqspi; int ret; ret = cqspi_set_protocol(nor, 1); @@ -946,7 +1016,7 @@ static ssize_t cqspi_read(struct spi_nor *nor, loff_t from, return ret; if (f_pdata->use_direct_mode) - memcpy_fromio(buf, cqspi->ahb_base + from, len); + ret = cqspi_direct_read_execute(nor, buf, from, len); else ret = cqspi_indirect_read_execute(nor, buf, from, len); if (ret) @@ -1115,6 +1185,21 @@ static void cqspi_controller_init(struct cqspi_st *cqspi) cqspi_controller_enable(cqspi, 1); } +static void cqspi_request_mmap_dma(struct cqspi_st *cqspi) +{ + dma_cap_mask_t mask; + + dma_cap_zero(mask); + dma_cap_set(DMA_MEMCPY, mask); + + cqspi->rx_chan = dma_request_chan_by_mask(&mask); + if (IS_ERR(cqspi->rx_chan)) { + dev_err(&cqspi->pdev->dev, "No Rx DMA available\n"); + cqspi->rx_chan = NULL; + } + init_completion(&cqspi->rx_dma_complete); +} + static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np) { const struct spi_nor_hwcaps hwcaps = { @@ -1192,6 +1277,9 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np) f_pdata->use_direct_mode = true; dev_dbg(nor->dev, "using direct mode for %s\n", mtd->name); + + if (!cqspi->rx_chan) + cqspi_request_mmap_dma(cqspi); } } @@ -1252,6 +1340,7 @@ static int cqspi_probe(struct platform_device *pdev) dev_err(dev, "Cannot remap AHB address.\n"); return PTR_ERR(cqspi->ahb_base); } + cqspi->mmap_phys_base = (dma_addr_t)res_ahb->start; cqspi->ahb_size = resource_size(res_ahb); init_completion(&cqspi->transfer_complete); @@ -1322,6 +1411,9 @@ static int cqspi_remove(struct platform_device *pdev) cqspi_controller_enable(cqspi, 0); + if (cqspi->rx_chan) + dma_release_channel(cqspi->rx_chan); + clk_disable_unprepare(cqspi->clk); pm_runtime_put_sync(&pdev->dev); diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c index 3e3c0bbc45c0..7d9620c7ff6c 100644 --- a/drivers/mtd/spi-nor/fsl-quadspi.c +++ b/drivers/mtd/spi-nor/fsl-quadspi.c @@ -214,6 +214,7 @@ enum fsl_qspi_devtype { FSL_QUADSPI_IMX7D, FSL_QUADSPI_IMX6UL, FSL_QUADSPI_LS1021A, + FSL_QUADSPI_LS2080A, }; struct fsl_qspi_devtype_data { @@ -267,6 +268,15 @@ static struct fsl_qspi_devtype_data ls1021a_data = { .driver_data = 0, }; +static const struct fsl_qspi_devtype_data ls2080a_data = { + .devtype = FSL_QUADSPI_LS2080A, + .rxfifo = 128, + .txfifo = 64, + .ahb_buf_size = 1024, + .driver_data = QUADSPI_QUIRK_TKT253890, +}; + + #define FSL_QSPI_MAX_CHIP 4 struct fsl_qspi { struct spi_nor nor[FSL_QSPI_MAX_CHIP]; @@ -661,7 +671,7 @@ static void fsl_qspi_set_map_addr(struct fsl_qspi *q) * causes the controller to clear the buffer, and use the sequence pointed * by the QUADSPI_BFGENCR[SEQID] to initiate a read from the flash. */ -static void fsl_qspi_init_abh_read(struct fsl_qspi *q) +static void fsl_qspi_init_ahb_read(struct fsl_qspi *q) { void __iomem *base = q->iobase; int seqid; @@ -795,7 +805,7 @@ static int fsl_qspi_nor_setup_last(struct fsl_qspi *q) fsl_qspi_init_lut(q); /* Init for AHB read */ - fsl_qspi_init_abh_read(q); + fsl_qspi_init_ahb_read(q); return 0; } @@ -806,6 +816,7 @@ static const struct of_device_id fsl_qspi_dt_ids[] = { { .compatible = "fsl,imx7d-qspi", .data = &imx7d_data, }, { .compatible = "fsl,imx6ul-qspi", .data = &imx6ul_data, }, { .compatible = "fsl,ls1021a-qspi", .data = (void *)&ls1021a_data, }, + { .compatible = "fsl,ls2080a-qspi", .data = &ls2080a_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids); diff --git a/drivers/mtd/spi-nor/hisi-sfc.c b/drivers/mtd/spi-nor/hisi-sfc.c index 04f9fb5cd9b6..dea7b0c4b339 100644 --- a/drivers/mtd/spi-nor/hisi-sfc.c +++ b/drivers/mtd/spi-nor/hisi-sfc.c @@ -112,7 +112,7 @@ struct hifmc_host { u32 num_chip; }; -static inline int wait_op_finish(struct hifmc_host *host) +static inline int hisi_spi_nor_wait_op_finish(struct hifmc_host *host) { u32 reg; @@ -120,7 +120,7 @@ static inline int wait_op_finish(struct hifmc_host *host) (reg & FMC_INT_OP_DONE), 0, FMC_WAIT_TIMEOUT); } -static int get_if_type(enum spi_nor_protocol proto) +static int hisi_spi_nor_get_if_type(enum spi_nor_protocol proto) { enum hifmc_iftype if_type; @@ -208,7 +208,7 @@ static int hisi_spi_nor_op_reg(struct spi_nor *nor, reg = FMC_OP_CMD1_EN | FMC_OP_REG_OP_START | optype; writel(reg, host->regbase + FMC_OP); - return wait_op_finish(host); + return hisi_spi_nor_wait_op_finish(host); } static int hisi_spi_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, @@ -259,9 +259,9 @@ static int hisi_spi_nor_dma_transfer(struct spi_nor *nor, loff_t start_off, reg = OP_CFG_FM_CS(priv->chipselect); if (op_type == FMC_OP_READ) - if_type = get_if_type(nor->read_proto); + if_type = hisi_spi_nor_get_if_type(nor->read_proto); else - if_type = get_if_type(nor->write_proto); + if_type = hisi_spi_nor_get_if_type(nor->write_proto); reg |= OP_CFG_MEM_IF_TYPE(if_type); if (op_type == FMC_OP_READ) reg |= OP_CFG_DUMMY_NUM(nor->read_dummy >> 3); @@ -274,7 +274,7 @@ static int hisi_spi_nor_dma_transfer(struct spi_nor *nor, loff_t start_off, : OP_CTRL_WR_OPCODE(nor->program_opcode); writel(reg, host->regbase + FMC_OP_DMA); - return wait_op_finish(host); + return hisi_spi_nor_wait_op_finish(host); } static ssize_t hisi_spi_nor_read(struct spi_nor *nor, loff_t from, size_t len, diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c index 699951523179..d2cbfc27826e 100644 --- a/drivers/mtd/spi-nor/intel-spi.c +++ b/drivers/mtd/spi-nor/intel-spi.c @@ -136,6 +136,7 @@ * @swseq_reg: Use SW sequencer in register reads/writes * @swseq_erase: Use SW sequencer in erase operation * @erase_64k: 64k erase supported + * @atomic_preopcode: Holds preopcode when atomic sequence is requested * @opcodes: Opcodes which are supported. This are programmed by BIOS * before it locks down the controller. */ @@ -153,6 +154,7 @@ struct intel_spi { bool swseq_reg; bool swseq_erase; bool erase_64k; + u8 atomic_preopcode; u8 opcodes[8]; }; @@ -285,7 +287,7 @@ static int intel_spi_wait_hw_busy(struct intel_spi *ispi) u32 val; return readl_poll_timeout(ispi->base + HSFSTS_CTL, val, - !(val & HSFSTS_CTL_SCIP), 0, + !(val & HSFSTS_CTL_SCIP), 40, INTEL_SPI_TIMEOUT * 1000); } @@ -294,7 +296,7 @@ static int intel_spi_wait_sw_busy(struct intel_spi *ispi) u32 val; return readl_poll_timeout(ispi->sregs + SSFSTS_CTL, val, - !(val & SSFSTS_CTL_SCIP), 0, + !(val & SSFSTS_CTL_SCIP), 40, INTEL_SPI_TIMEOUT * 1000); } @@ -474,7 +476,7 @@ static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, int len, int optype) { u32 val = 0, status; - u16 preop; + u8 atomic_preopcode; int ret; ret = intel_spi_opcode_index(ispi, opcode, optype); @@ -484,17 +486,42 @@ static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, int len, if (len > INTEL_SPI_FIFO_SZ) return -EINVAL; + /* + * Always clear it after each SW sequencer operation regardless + * of whether it is successful or not. + */ + atomic_preopcode = ispi->atomic_preopcode; + ispi->atomic_preopcode = 0; + /* Only mark 'Data Cycle' bit when there is data to be transferred */ if (len > 0) val = ((len - 1) << SSFSTS_CTL_DBC_SHIFT) | SSFSTS_CTL_DS; val |= ret << SSFSTS_CTL_COP_SHIFT; val |= SSFSTS_CTL_FCERR | SSFSTS_CTL_FDONE; val |= SSFSTS_CTL_SCGO; - preop = readw(ispi->sregs + PREOP_OPTYPE); - if (preop) { - val |= SSFSTS_CTL_ACS; - if (preop >> 8) - val |= SSFSTS_CTL_SPOP; + if (atomic_preopcode) { + u16 preop; + + switch (optype) { + case OPTYPE_WRITE_NO_ADDR: + case OPTYPE_WRITE_WITH_ADDR: + /* Pick matching preopcode for the atomic sequence */ + preop = readw(ispi->sregs + PREOP_OPTYPE); + if ((preop & 0xff) == atomic_preopcode) + ; /* Do nothing */ + else if ((preop >> 8) == atomic_preopcode) + val |= SSFSTS_CTL_SPOP; + else + return -EINVAL; + + /* Enable atomic sequence */ + val |= SSFSTS_CTL_ACS; + break; + + default: + return -EINVAL; + } + } writel(val, ispi->sregs + SSFSTS_CTL); @@ -538,13 +565,31 @@ static int intel_spi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) /* * This is handled with atomic operation and preop code in Intel - * controller so skip it here now. If the controller is not locked, - * program the opcode to the PREOP register for later use. + * controller so we only verify that it is available. If the + * controller is not locked, program the opcode to the PREOP + * register for later use. + * + * When hardware sequencer is used there is no need to program + * any opcodes (it handles them automatically as part of a command). */ if (opcode == SPINOR_OP_WREN) { - if (!ispi->locked) + u16 preop; + + if (!ispi->swseq_reg) + return 0; + + preop = readw(ispi->sregs + PREOP_OPTYPE); + if ((preop & 0xff) != opcode && (preop >> 8) != opcode) { + if (ispi->locked) + return -EINVAL; writel(opcode, ispi->sregs + PREOP_OPTYPE); + } + /* + * This enables atomic sequence on next SW sycle. Will + * be cleared after next operation. + */ + ispi->atomic_preopcode = opcode; return 0; } @@ -569,6 +614,13 @@ static ssize_t intel_spi_read(struct spi_nor *nor, loff_t from, size_t len, u32 val, status; ssize_t ret; + /* + * Atomic sequence is not expected with HW sequencer reads. Make + * sure it is cleared regardless. + */ + if (WARN_ON_ONCE(ispi->atomic_preopcode)) + ispi->atomic_preopcode = 0; + switch (nor->read_opcode) { case SPINOR_OP_READ: case SPINOR_OP_READ_FAST: @@ -627,6 +679,9 @@ static ssize_t intel_spi_write(struct spi_nor *nor, loff_t to, size_t len, u32 val, status; ssize_t ret; + /* Not needed with HW sequencer write, make sure it is cleared */ + ispi->atomic_preopcode = 0; + while (len > 0) { block_size = min_t(size_t, len, INTEL_SPI_FIFO_SZ); @@ -707,6 +762,9 @@ static int intel_spi_erase(struct spi_nor *nor, loff_t offs) return 0; } + /* Not needed with HW sequencer erase, make sure it is cleared */ + ispi->atomic_preopcode = 0; + while (len > 0) { writel(offs, ispi->base + FADDR); diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 5bfa36e95f35..d9c368c44194 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -284,6 +284,20 @@ static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info, if (need_wren) write_disable(nor); + if (!status && !enable && + JEDEC_MFR(info) == SNOR_MFR_WINBOND) { + /* + * On Winbond W25Q256FV, leaving 4byte mode causes + * the Extended Address Register to be set to 1, so all + * 3-byte-address reads come from the second 16M. + * We must clear the register to enable normal behavior. + */ + write_enable(nor); + nor->cmd_buf[0] = 0; + nor->write_reg(nor, SPINOR_OP_WREAR, nor->cmd_buf, 1); + write_disable(nor); + } + return status; default: /* Spansion style */ @@ -980,6 +994,7 @@ static const struct flash_info spi_nor_ids[] = { { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) }, { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) }, { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) }, + { "en25qh32", INFO(0x1c7016, 0, 64 * 1024, 64, 0) }, { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) }, { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) }, { "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128, SECT_4K) }, @@ -1049,6 +1064,14 @@ static const struct flash_info spi_nor_ids[] = { SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "is25lp128", INFO(0x9d6018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ) }, + { "is25lp256", INFO(0x9d6019, 0, 64 * 1024, 512, + SECT_4K | SPI_NOR_DUAL_READ) }, + { "is25wp032", INFO(0x9d7016, 0, 64 * 1024, 64, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "is25wp064", INFO(0x9d7017, 0, 64 * 1024, 128, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "is25wp128", INFO(0x9d7018, 0, 64 * 1024, 256, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, /* Macronix */ { "mx25l512e", INFO(0xc22010, 0, 64 * 1024, 1, SECT_4K) }, @@ -1087,6 +1110,7 @@ static const struct flash_info spi_nor_ids[] = { { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, + { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, /* PMC */ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, @@ -1198,6 +1222,11 @@ static const struct flash_info spi_nor_ids[] = { SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, + { + "w25q32jv", INFO(0xef7016, 0, 64 * 1024, 64, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) + }, { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) }, { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, { @@ -1230,6 +1259,10 @@ static const struct flash_info spi_nor_ids[] = { { "3S400AN", S3AN_INFO(0x1f2400, 256, 264) }, { "3S700AN", S3AN_INFO(0x1f2500, 512, 264) }, { "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) }, + + /* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */ + { "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { }, }; diff --git a/drivers/mtd/spi-nor/stm32-quadspi.c b/drivers/mtd/spi-nor/stm32-quadspi.c index b3c7f6addba7..72553506a00b 100644 --- a/drivers/mtd/spi-nor/stm32-quadspi.c +++ b/drivers/mtd/spi-nor/stm32-quadspi.c @@ -656,7 +656,7 @@ static int stm32_qspi_probe(struct platform_device *pdev) return ret; } - rstc = devm_reset_control_get(dev, NULL); + rstc = devm_reset_control_get_exclusive(dev, NULL); if (!IS_ERR(rstc)) { reset_control_assert(rstc); udelay(2); diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 792ea5c26329..abe975c87b90 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -86,6 +86,7 @@ struct nand_pos { * @ooboffs: the OOB offset within the page * @ooblen: the number of OOB bytes to read from/write to this page * @oobbuf: buffer to store OOB data in or get OOB data from + * @mode: one of the %MTD_OPS_XXX mode * * This object is used to pass per-page I/O requests to NAND sub-layers. This * way all useful information are already formatted in a useful way and @@ -106,6 +107,7 @@ struct nand_page_io_req { const void *out; void *in; } oobbuf; + int mode; }; /** @@ -599,6 +601,7 @@ static inline void nanddev_io_iter_init(struct nand_device *nand, { struct mtd_info *mtd = nanddev_to_mtd(nand); + iter->req.mode = req->mode; iter->req.dataoffs = nanddev_offs_to_pos(nand, offs, &iter->req.pos); iter->req.ooboffs = req->ooboffs; iter->oobbytes_per_page = mtd_oobavail(mtd, req); diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index 17c919436f48..3e8ec3b8a39c 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -28,7 +28,14 @@ struct nand_flash_dev; struct device_node; /* Scan and identify a NAND device */ -int nand_scan(struct mtd_info *mtd, int max_chips); +int nand_scan_with_ids(struct mtd_info *mtd, int max_chips, + struct nand_flash_dev *ids); + +static inline int nand_scan(struct mtd_info *mtd, int max_chips) +{ + return nand_scan_with_ids(mtd, max_chips, NULL); +} + /* * Separate phases of nand_scan(), allowing board driver to intervene * and override command or ECC setup according to flash type. @@ -740,8 +747,9 @@ enum nand_data_interface_type { /** * struct nand_data_interface - NAND interface timing - * @type: type of the timing - * @timings: The timing, type according to @type + * @type: type of the timing + * @timings: The timing, type according to @type + * @timings.sdr: Use it when @type is %NAND_SDR_IFACE. */ struct nand_data_interface { enum nand_data_interface_type type; @@ -798,8 +806,9 @@ struct nand_op_addr_instr { /** * struct nand_op_data_instr - Definition of a data instruction * @len: number of data bytes to move - * @in: buffer to fill when reading from the NAND chip - * @out: buffer to read from when writing to the NAND chip + * @buf: buffer to fill + * @buf.in: buffer to fill when reading from the NAND chip + * @buf.out: buffer to read from when writing to the NAND chip * @force_8bit: force 8-bit access * * Please note that "in" and "out" are inverted from the ONFI specification @@ -842,9 +851,13 @@ enum nand_op_instr_type { /** * struct nand_op_instr - Instruction object * @type: the instruction type - * @cmd/@addr/@data/@waitrdy: extra data associated to the instruction. - * You'll have to use the appropriate element - * depending on @type + * @ctx: extra data associated to the instruction. You'll have to use the + * appropriate element depending on @type + * @ctx.cmd: use it if @type is %NAND_OP_CMD_INSTR + * @ctx.addr: use it if @type is %NAND_OP_ADDR_INSTR + * @ctx.data: use it if @type is %NAND_OP_DATA_IN_INSTR + * or %NAND_OP_DATA_OUT_INSTR + * @ctx.waitrdy: use it if @type is %NAND_OP_WAITRDY_INSTR * @delay_ns: delay the controller should apply after the instruction has been * issued on the bus. Most modern controllers have internal timings * control logic, and in this case, the controller driver can ignore @@ -1003,7 +1016,9 @@ struct nand_op_parser_data_constraints { * struct nand_op_parser_pattern_elem - One element of a pattern * @type: the instructuction type * @optional: whether this element of the pattern is optional or mandatory - * @addr/@data: address or data constraint (number of cycles or data length) + * @ctx: address or data constraint + * @ctx.addr: address constraint (number of cycles) + * @ctx.data: data constraint (data length) */ struct nand_op_parser_pattern_elem { enum nand_op_instr_type type; @@ -1230,6 +1245,8 @@ int nand_op_parser_exec_op(struct nand_chip *chip, * devices. * @priv: [OPTIONAL] pointer to private chip data * @manufacturer: [INTERN] Contains manufacturer information + * @manufacturer.desc: [INTERN] Contains manufacturer's description + * @manufacturer.priv: [INTERN] Contains manufacturer private information */ struct nand_chip { diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index de36969eb359..e60da0d34cc1 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -62,6 +62,8 @@ #define SPINOR_OP_RDCR 0x35 /* Read configuration register */ #define SPINOR_OP_RDFSR 0x70 /* Read flag status register */ #define SPINOR_OP_CLFSR 0x50 /* Clear flag status register */ +#define SPINOR_OP_RDEAR 0xc8 /* Read Extended Address Register */ +#define SPINOR_OP_WREAR 0xc5 /* Write Extended Address Register */ /* 4-byte address opcodes - used on Spansion and some Macronix flashes. */ #define SPINOR_OP_READ_4B 0x13 /* Read data bytes (low frequency) */ |